Multivalent Proteins Rapidly and Reversibly Phase-Separate upon Osmotic Cell Volume Change.

Processing bodies (PBs) and stress granules (SGs) are prominent examples of subcellular, membraneless compartments that are observed under physiological and stress conditions, respectively. We observe that the trimeric PB protein DCP1A rapidly (within ∼10 s) phase-separates in mammalian cells during hyperosmotic stress and dissolves upon isosmotic rescue (over ∼100 s) with minimal effect on cell viability even after multiple cycles of osmotic perturbation. Strikingly, this rapid intracellular hyperosmotic phase separation (HOPS) correlates with the degree of cell volume compression, distinct from SG assembly, and is exhibited broadly by homo-multimeric (valency ≥ 2) proteins across several cell types. Notably, HOPS sequesters pre-mRNA cleavage factor components from actively transcribing genomic loci, providing a mechanism for hyperosmolarity-induced global impairment of transcription termination. Our data suggest that the multimeric proteome rapidly responds to changes in hydration and molecular crowding, revealing an unexpected mode of globally programmed phase separation and sequestration.

Genetic adaptations for the oceanic success of fish eggs.

Genetic adaptations of organisms living in extreme environments are fundamental to our understanding of where life can evolve. Water is the single limiting parameter in this regard, yet when released in the oceans, the single-celled eggs of marine bony fishes (teleosts) have no means of acquiring it. They are strongly hyposmotic to seawater and lack osmoregulatory systems. Paradoxically, modern teleosts successfully release vast quantities of eggs in the extreme saline environment and recorded the most explosive radiation in vertebrate history. Here, we highlight key genetic adaptations that evolved to solve this paradox by filling the pre-ovulated eggs with water. The degree of water acquisition is uniquely prevalent to marine teleosts, permitting the survival and oceanic dispersal of their eggs.

Elucidating the role of water in collagen self-assembly by isotopically modulating collagen hydration.

Water is known to play an important role in collagen self-assembly, but it is still largely unclear how water-collagen interactions influence the assembly process and determine the fibril network properties. Here, we use the H[Formula: see text]O/D[Formula: see text]O isotope effect on the hydrogen-bond strength in water to investigate the role of hydration in collagen self-assembly. We dissolve collagen in H[Formula: see text]O and D[Formula: see text]O and compare the growth kinetics and the structure of the collagen assemblies formed in these water isotopomers. Surprisingly, collagen assembly occurs ten times faster in D[Formula: see text]O than in H[Formula: see text]O, and collagen in D[Formula: see text]O self-assembles into much thinner fibrils, that form a more inhomogeneous and softer network, with a fourfold reduction in elastic modulus when compared to H[Formula: see text]O. Combining spectroscopic measurements with atomistic simulations, we show that collagen in D[Formula: see text]O is less hydrated than in H[Formula: see text]O. This partial dehydration lowers the enthalpic penalty for water removal and reorganization at the collagen-water interface, increasing the self-assembly rate and the number of nucleation centers, leading to thinner fibrils and a softer network. Coarse-grained simulations show that the acceleration in the initial nucleation rate can be reproduced by the enhancement of electrostatic interactions. These results show that water acts as a mediator between collagen monomers, by modulating their interactions so as to optimize the assembly process and, thus, the final network properties. We believe that isotopically modulating the hydration of proteins can be a valuable method to investigate the role of water in protein structural dynamics and protein self-assembly.

Molecularly confined hydration in thermoresponsive hydrogels for efficient atmospheric water harvesting.

Water scarcity is a pressing global issue, requiring innovative solutions such as atmospheric water harvesting (AWH), which captures moisture from the air to provide potable water to many water-stressed areas. Thermoresponsive hydrogels, a class of temperature-sensitive polymers, demonstrate potential for AWH as matrices for hygroscopic components like salts predominantly due to their relatively energy-efficient desorption properties compared to other sorbents. However, challenges such as limited swelling capacity due to the salting-out effect and difficulty in more complete water release hinder the effectiveness of conventional hydrogel sorbents. To overcome these limitations, we introduce molecularly confined hydration in thermoresponsive hydrogels by employing a bifunctional polymeric network composed of hygroscopic zwitterionic moieties and thermoresponsive moieties. Here, we show that this approach ensures stable water uptake, enables water release at relatively low temperatures, and exhibits rapid sorption-desorption kinetics. Furthermore, by incorporating photothermal absorbers, the sorbent can achieve solar-driven AWH with comparable water release performance. This work advances the design of AWH sorbents by introducing molecularly confined hydration in thermoresponsive hydrogels, leading to a more efficient and sustainable approach to water harvesting. Our findings offer a potential solution for advanced sorbent design with comprehensive performance to mitigate the freshwater crisis.

A Mode-Coupling Model of Colloid Thermophoresis in Aqueous Systems: Temperature and Size Dependencies of the Soret Coefficient.

Thermophoresis allows for the manipulation of colloids in systems containing a temperature gradient. A deep understanding of the phenomena at the molecular level allows for increased control and manipulation strategies. We developed a microscopic model revealing different coupling mechanisms for colloid thermophoresis under local thermodynamic equilibrium conditions. The model has been verified through comparison with a variety of previously published experimental data and shows good agreement across significantly different systems. We found five different temperature-dependent contributions to the Soret coefficient, two from bulk properties and three from interfacial interactions between the fluid medium and the colloid. Our analysis shows that the Soret coefficient for nanosized particles is governed by the competition between the electrostatic and hydration interfacial interactions, while bulk contributions become more pronounced for protein systems. This theory can be used as a guide to design thermophoretic transport, which is relevant for sensing, focusing, and separation at the microscale.

Disparate External Electric Field Effect on the Adsorption and Shear Behavior of Monovalent and Trivalent Ions in Electrolyte Solution.

Reducing friction is of great interest, and an external potential applied to the friction pair can regulate lubricity. Electrochemical atomic force microscopy (EC-AFM) is used to study the tribological and adsorption behavior of monovalent and trivalent ionic solutions between charged surfaces. An opposite trend of coefficient of friction (COF) and normal force that varies with the applied electric potential is witnessed. Direct force measurements and theoretical models have disclosed that, for the NaCl solution, the negative electric field reduces the COF by increasing cation adsorption. As for LaCl3 solution, the positive electric field promotes the primary adsorption of anions on HOPG, resulting in the disappearance of the attractive ion-ion correlation between the trivalent ions, thereby reducing the COF. The shear behavior of adsorbed ions in electrolyte solution is sensitive to their valence, because of their different surface force contribution. The study further provides a framework to optimize the design of hydration lubrication.

Resolving binding pathways and solvation thermodynamics of plant hormone receptors.

Plant hormones are small molecules that regulate plant growth, development, and responses to biotic and abiotic stresses. They are specifically recognized by the binding site of their receptors. In this work, we resolved the binding pathways for eight classes of phytohormones (auxin, jasmonate, gibberellin, strigolactone, brassinosteroid, cytokinin, salicylic acid, and abscisic acid) to their canonical receptors using extensive molecular dynamics simulations. Furthermore, we investigated the role of water displacement and reorganization at the binding site of the plant receptors through inhomogeneous solvation theory. Our findings predict that displacement of water molecules by phytohormones contributes to free energy of binding via entropy gain and is associated with significant free energy barriers for most systems analyzed. Also, our results indicate that displacement of unfavorable water molecules in the binding site can be exploited in rational agrochemical design. Overall, this study uncovers the mechanism of ligand binding and the role of water molecules in plant hormone perception, which creates new avenues for agrochemical design to target plant growth and development.

Functional Evolution of Clustered Aquaporin Genes Reveals Insights into the Oceanic Success of Teleost Eggs.

Aquaporin-mediated oocyte hydration is considered important for the evolution of pelagic eggs and the radiative success of marine teleosts. However, the molecular regulatory mechanisms controlling this vital process are not fully understood. Here, we analyzed >400 piscine genomes to uncover a previously unknown teleost-specific aquaporin-1 cluster (TSA1C) comprised of tandemly arranged aqp1aa-aqp1ab2-aqp1ab1 genes. Functional evolutionary analysis of the TSA1C reveals a ∼300-million-year history of downstream aqp1ab-type gene loss, neofunctionalization, and subfunctionalization, but with marine species that spawn highly hydrated pelagic eggs almost exclusively retaining at least one of the downstream paralogs. Unexpectedly, one-third of the modern marine euacanthomorph teleosts selectively retain both aqp1ab-type channels and co-evolved protein kinase-mediated phosphorylation sites in the intracellular subdomains together with teleost-specific Ywhaz-like (14-3-3ζ-like) binding proteins for co-operative membrane trafficking regulation. To understand the selective evolutionary advantages of these mechanisms, we show that a two-step regulated channel shunt avoids competitive occupancy of the same plasma membrane space in the oocyte and accelerates hydration. These data suggest that the evolution of the adaptive molecular regulatory features of the TSA1C facilitated the rise of pelagic eggs and their subsequent geodispersal in the oceanic currents.

Construction of Hydration Layer for Proton Transport by Implanting the Hydrophilic Center Ag0 in Nickel Metal-Organic Frameworks.

The directional arrangement of H2O molecules can effectively regulate the ordered protons transfer to improve transport efficiency, which can be controlled by the interaction between materials and H2O. Herein, a strategy to build a stable hydration layer in metal-organic framework (MOF) platforms, in which hydrophilic centers that can manipulate H2O molecules are implanted into MOF cavities is presented. The rigid grid-Ni-MOF is selected as the supporting material due to the uniformly distributed cavities and rigid structures. The Ag0 possesses potential combination ability with the hydrophilic substances, so it is introduced into the MOF as hydration layer centers. Relying on the strong interaction between Ag0 and H2O, the H2O molecules can rearrange around Ag0 in the cavity, which is intuitively verified by DFT calculation and molecular dynamics simulation. The establishment of a hydration layer in Ag@Ni-MOF regulates the chemical properties of the material and gives the material excellent proton conduction performance, with a proton conductivity of 4.86 × 10-2 S cm-1.

High-Temperature Protonic Conduction in La2 NiO4+ δ -Based Ruddlesden-Popper Type Oxides: Correlation with Concentration of Interstitial Oxide Ions.

Oxygen-excess La2 NiO4+ δ (LNO) conducts oxide ions, electron holes, and hydroxide ions simultaneously on exposing to wet oxygen, exhibiting the potential as a cathode material in protonic ceramic fuel cells. Since the incorporation of protons in oxygen-excess LNO is via the hydration reaction assisted by interstitial oxide ions, in this work, the concentration of interstitial oxide ions is reduced and increased by substituting Ni with Cu and Co, respectively. A higher concentration of interstitial oxide ions leads to a high proton concentration, indicating the predominant role of interstitial oxide ions in the hydration reaction, different from that in the oxygen-deficient oxides, where protons are introduced by dissociative absorption of water molecules by oxygen vacancies. The theoretical calculation indicates that protons in Co-doped LNO prefer to locate between the interstitial oxide ions and unshared apical oxide ions. A trapping effect is found between protons and the oxide ions near Cu, leading to decreased proton mobility. Protonic conductivity at 400-575 °C is then directly measured by a Hebb-Wagner direct current polarization method with La0.99 Ca0.01 NbO4- δ as the blocking electrode, enabling the observation that Co-doped LNO has the highest protonic conductivity among the samples studied in this work.

Multifunctional Iron Selenate Sheath of Fe-Based Anode Achieving High-Rate Capacity-Durability Combination of Aqueous Hybrid Energy Storage Devices.

The introduction of battery-type cathode has been commonly considered a preferred approach to boost the energy density of aqueous hybrid energy storage devices (AHESDs) in alkalic systems, but AHESDs with both high energy density and power density are rare due to the great challenge in designing battery-type anode materials with high rate and durability comparable to capacitive-type carbon anodes. In this paper, a well-hydrated iron selenate (FeSeO) sheath is constructed around FeOOH nanorods by a facile electrochemical activation, demonstrating the unique multifunction in fasting charge diffusion, promoting the dissociation of H2O, and inhibiting the irreversible phase transition of FeOOH to inert γ-Fe2O3, which endow the hydrated sheath coated Fe-based anodes with an impressive rate capability and superior durability. Thanks to the comprehensive performance of this Fe-based anode, the assembled AHESD delivered a high energy density of 117 Wh kg-1 with the extraordinary durability of almost 100% capacity retention after 40 000 cycles. Even at an ultrahigh power density of 27 000 W kg-1, an impressive energy density of 65 Wh kg-1 can be achieved, which rivals previously reported energy-storage devices.

Noninvasive Monitoring to Detect Dehydration: Are We There Yet?

The need for hydration monitoring is significant, especially for the very young and elderly populations who are more vulnerable to becoming dehydrated and suffering from the effects that dehydration brings. This need has been among the drivers of considerable effort in the academic and commercial sectors to provide a means for monitoring hydration status, with a special interest in doing so outside the hospital or clinical setting. This review of emerging technologies provides an overview of many technology approaches that, on a theoretical basis, have sensitivity to water and are feasible as a routine measurement. We review the evidence of technical validation and of their use in humans. Finally, we highlight the essential need for these technologies to be rigorously evaluated for their diagnostic potential, as a necessary step to meet the need for hydration monitoring outside of the clinical environment.

Gold trifluoromethyl complexes as efficient regioselective catalysts in alkyne hydration.

Gold (III) complexes containing trifluromethyl ligands are efficient catalyst in the hydration of alkynes, operating at low catalyst loadings, without additives, using environmentally friendly solvents and at mild conditions (60 ºC). Hydration of terminal and internal alkynes provide the corresponding ketones in quantitative yields without special precautions as dry solvents or inert atmospheres. Remarkably, hydration of asymmetric internal alkynes proceeds with moderate to notable regioselectivities, providing mixtures of the two possible isomers with ratios up to 90:10.

Ambiguous Faces of Water-Based Inclusion Compounds: L4(4)8(8) Intercalato-Clathrate Hydrate of Pt(II) Complex.

Clathrate hydrates are among the most intensively studied H-bond inclusion compounds. Despite the broad definition for this class of compounds, their meaning commonly refers to closed polyhedral nanocages that encapsulate small guest molecules. On the other hand, larger solutes enforce another type of encapsulation because of the solute size effect. Herein, we report a series of structures containing various molecules encapsulated by intercalated water layers constructed of polycyclic moieties of L4(4)8(8) topology. We parametrized the corrugation of individual layers and characterized interactions governing their formation. We suggested that these could be categorized as two-dimensional clathrates based on the character of intra-layer interactions and the effects observed between entrapped molecules and water-based intercalators.

Prediction of Food Sensitization in Children with Atopic Dermatitis Based on Disease Severity and Epidermal Layer Impairment.

INTRODUCTION: Atopic dermatitis (AD) is characterized by an impaired epidermal barrier, which could be associated with sensitization to food allergens (FAs) and/or inhaled allergens and contribute to the severity of AD. However, no clinical guidance has been established for evaluations of food sensitization (FS) in AD patients. This study investigated how AD severity and epidermal barrier impairment are associated with FS and factors that can predict FS in children with AD. METHODS: This cross-sectional study included 100 children (12-60 months) diagnosed with AD. AD severity was determined using the Scoring Atopic Dermatitis (SCORAD) index. FS was evaluated by measuring serum-specific IgE antibodies against 31 FAs using an immunoblotting method. Epidermal barrier impairment was assessed by measuring transepidermal water loss (TEWL) and stratum corneum hydration (SCH) levels. RESULTS: 90% of participants were sensitized to at least one tested FA, with cow's milk, egg white, beef, almond, egg yolk, and peanut being the most common. Children with moderate-severe AD had lower SCH levels than those with mild AD. Children with AD who were sensitized to >10 FAs had significantly higher TEWL and lower SCH levels, compared with those sensitized to 1-4 FAs and 5-10 FAs. The SCORAD score and SCH level in lesional skin provided moderately predictive value for sensitization to FAs in children with AD. CONCLUSION: FS is common in children with AD and closely associate with AD severity as well as epidermal barrier impairment. Evaluations of FS should be considered for children with moderate to severe AD and/or low SCH levels.

Studying Local Electrostatics by Terahertz Spectroscopy Using Amines as a Probe.

In a previous study[1] we could show that a large amplitude mode of the zwitterion glycine can serve as a sensitive probe for protonation and allows to deduce local pKa values. Here we show that the underlying concept is more general: We present the results of a pH dependent measurement of Terahertz-FTIR (THz-FTIR) spectra of solvated amines, i. e. Diethylamine (DEA), Triethylamine (TEA), and Diisopropylamine (DiPA). We show that amines serve as a sensitive, label free probe for local protonation. Protonation of the amines yield intensity changes which can be quantified by precise THz spectroscopy (30 cm-1 -450 cm-1 ). A detailed analysis allows us to correlate the titration spectra of solvated amines in the THz range with pKa values. This demonstrates the potential of THz spectroscopy to probe the charge state of biomolecules in water in a label free manner.

Structural Order in the Hydration Shell of Nonpolar Groups versus that in Bulk Water.

The poor solubility of nonpolar compounds in water around room temperature is governed by a large and negative entropy change, whose molecular cause is still debated. Since the Frank and Evans original proposal in 1945, the large and negative entropy change is usually attributed to the formation of ordered structures in the hydration shell of nonpolar groups. However, the existence of such ordered structures has never been proven. The present study is aimed at providing available structural results and thermodynamic arguments disproving the existence of ordered structures in the hydration shell of nonpolar groups.

A Python tool to determine the thickness of the hydrate layer around clinker grains using SEM-BSE images.

To accurately simulate the hydration process of cementitious materials, understanding the growth rate of C-S-H layers around clinker grains is crucial. Nonetheless, the thickness of the hydrate layer shows substantial variation around individual grains, depending on their surrounding. Consequently, it is not feasible to measure hydrate layers manually in a reliable and reproducible manner. To address this challenge, a software has been developed to statistically determine the C-S-H thickness, requiring minimal manual interventions for thresholding and for setting limits like particle size or circularity. This study presents a tool, which automatically identifies suitable clinker grains and and perform statistical measurements of their hydrate layer up to a specimen age of 28 days. The findings reveal a significant increase in the C-S-H layer, starting from 0.45  µ m $\umu {\rm {m}}$ after 1 day and reaching 3.04  µ m $\umu {\rm {m}}$ after 28 days. However, for older specimens, the measurement of the C-S-H layer was not feasible due to limited pore space and clinker grains.

Early hydration of C4AF with silica fume and its role on katoite composition.

C4AF is considered the least reactive main clinker phase, but its reactivity may be affected by adding supplementary cementitious materials (SCMs). Pure C4AF was synthesised in a laboratory furnace, and the role of silica fume without gypsum on its early hydration properties was monitored. Burning was carried out in four stages to achieve 99% purity of C4AF. Heat flow development was monitored by isothermal calorimetry over 7 days of hydration at 20°C and 40°C. The role of silica fume on hydrogarnet phase katoite (Ca3Al2(SiO4)3 - x(OH)4 x x = 1.5-3) formation during early hydration was studied. Rapid dissolution of C4AF, formation of metastable C-(A,F)-H and its conversion to C3(A, F)H6 was evidenced by isothermal calorimetry as a large exotherm. Changes in microstructure during early hydration were documented by SE micrographs, EDS point analyses, X-ray mapping and line scans by SEM-EDS. The phase composition was characterised by DTA-TGA and QXRD after 7 days of hydration. The katoite diffraction pattern is similar for the reference sample and sample with silica fume, but substitution in its structure can be revealed by X-ray microanalyses. The composition of katoite is variable due to the various extent of substitution of 4OH- by SiO4 4- due to silica fume.

Interactions of moisture and light drive lichen growth and the response to climate change scenarios: experimental evidence for Lobaria pulmonaria.

BACKGROUND AND AIMS: There is growing interest in the functional ecology of poikilohydric non-vascular photoautotrophs (NVPs), including 'cryptogamic' bryophytes and lichens. These organisms are structurally important in many ecosystems, contributing substantially to ecosystem function and services, while also being sensitive to climate change. Previous research has quantified the climate change response of poikilohydric NVPs using predictive bioclimatic models with standard climate variables including precipitation totals and temperature averages. This study aimed for an improved functional understanding of their climate change response based on their growth rate sensitivity to moisture and light. METHODS: We conducted a 24-month experiment to monitor lichen hydration and growth. We accounted for two well-known features in the ecology of poikilohydric NVPs, and exemplified here for a structurally dominant lichen epiphyte, Lobaria pulmonaria: (1) sensitivity to multiple sources of atmospheric moisture including rain, condensed dew-formation and water vapour; and (2) growth determined by the amount of time hydrated in the light, driving photosynthesis, referred to as the Iwet hypothesis. KEY RESULTS: First, we found that even within an oceanic high-rainfall environment, lichen hydration was better explained by vapour pressure deficit than precipitation totals. Second, growth at a monthly resolution was positively related to the amount of time spent hydrated in the light, and negatively related to the amount of time spent hydrated in the dark. CONCLUSIONS: Using multimodel averaging to project growth models for an ensemble of future climate change scenarios, we demonstrated reduced net growth for L. pulmonaria by the late 21st century, explained by extended climate dryness and lichen desiccation for periods when there is otherwise sufficient light to drive photosynthesis. The results further emphasize a key issue of photoperiodism when constructing functionally relevant models to understand the risk of climate change, especially for poikilohydric NVPs.