Reducing apical voids for intra-canal sealer injection using a modified passive deflation needle.

The aim of the study was to evaluate the ability of a modified passive deflation needle to reduce the apical voids during the intra-canal iRoot SP sealer injection. A modified passive deflation injection needle was designed. Forty 20°-curved and twenty S-shaped single-canal resin block models were allocated into six groups. Each group was mechanically prepared to #25/04 or #25/06 file; then the root canals were injected with iRoot SP sealer using a modified needle or a normal plastic needle. Radiographs were taken to measure the length of apical void in each specimen. Similarly, twenty single-canal extracted premolars were collected and randomly divided into four groups. Each group was prepared to #25/04 or #25/06 file; then the root canals were injected with iRoot SP sealer using a modified needle or a normal plastic needle. Roots were then scanned using micro-computed tomography (micro-CT), and the volume of voids in root canals was analyzed and compared among groups. Statistical analysis demonstrated that the length and the volumetric percentage of voids were much lower in the modified needle group in both resin block root canal models and extract teeth than the normal plastic needle group (P < 0.05). The modified passive deflation needle can efficiently reduce apical voids during the intra-canal iRoot SP sealer injection.

Micro-computed tomographic evaluation on the quality of single-cone obturation using a modified passive-deflation sealer injection needle: an in vitro study.

OBJECTIVES: This study aimed to design a modified passive-deflation sealer injection needle and investigate its ability to improve obturation quality of single-cone technique through assessing the distribution of voids in root canals using micro-computed tomography (micro-CT). MATERIALS AND METHODS: Forty-eight mandibular incisors were divided into eight groups (n = 6), according to the taper of root canal preparation (0.06 or 0.04), the needle used for sealer injection (modified or commercial iRoot SP injection needle), and the obturation method (iRoot SP sealer-only or single-cone obturation). After obturation, each specimen was scanned by micro-CT. The volumetric percentage and distribution of all voids were first analyzed and compared among groups, then the open and closed voids were separately analyzed and compared among single-cone obturation groups. RESULTS: Compared to commercial needle groups, modified needle groups showed much less voids, especially in the apical root canal part (P < 0.05). Besides, the modified needle groups produced much less open voids than commercial needle groups despite the root canal taper (P < 0.05). CONCLUSIONS: The modified passive deflation sealer injection needle could effectively improve the quality of single-cone obturation through reducing intra-canal voids, especially open voids throughout the root canal, thus might possibly be developed as an effective intra-canal sealer delivering instrument.

The bioceramic sealer iRoot SP promotes osteogenic differentiation of human stem cells from apical papilla via miR-141-3p/SPAG9/MAPK signalling pathway.

AIM: The premixed bioceramic sealer iRoot SP that is widely used clinically has been reported to kill bacterial biofilms and promote osteogenic differentiation of human stem cells from the apical papilla (hSCAPs). Although miR-141-3p has been substantiated to be involved in the osteogenic process, the underlying mechanisms remain unclear. The aim of this study was to investigate the role of miR-141-3p in osteogenic differentiation and underlying mechanisms of iRoot SP-treated hSCAPs. METHODOLOGY: hSCAPs were extracted from tissue blocks with enzyme digestion and identified by using immunofluorescence, flow cytometry and alizarin red staining. The mRNA expression level of miR-141-3p in hSCPAs after culture with iRoot SP was examined by quantitative real-time PCR (qRT-PCR) assay. SPAG9 was identified as a downstream target gene of miR-141-3p by dual-luciferase report assay. Alkaline phosphatase (ALP) staining and activity detection, alizarin red staining, calcium concentration assay, qRT-PCR and western blot were used to estimate osteogenic differentiation ability and involved protein expression levels of the osteogenic makers and signalling pathway-related factors in iRoot SP-treated hSCAPs. Data were analysed by one-way anova and post hoc Tukey's test to determine any statistical differences between the experimental groups and the control group. p < .05 was considered statistically significant. RESULTS: Expression of miR-141-3p was reduced in iRoot SP-treated hSCAPs with the increased exposure time up to 7 days, and the western blot and qRT-PCR results revealed that the osteogenic markers osteocalcin (OCN), osterix (OSX), runt-related transcription factor 2 (RUNX2) and dentin sialophosphoprotein (DSPP) were inversely correlated with miR-141-3p. The negative regulatory relationship between miR-141-3p and SPAG9/ mitogen-activated protein kinases (MAPK) signalling axis was validated in this in vitro experiments. CONCLUSIONS: The bioceramic sealer iRoot SP promoted osteogenic differentiation of hSCAPs by inhibiting miR-141-3p following down-regulated SPAG9 expression, and activated MAPK pathway. These findings proposed a novel therapeutic impact of bioceramic sealer iRoot SP inducing bone regeneration in refractory periapical periodontitis.

In vitro evaluation of the sealing ability of combined use of iRoot BP Plus and iRoot SP for root-end filling.

OBJECTIVES: The aim of this in vitro study was to evaluate the sealing ability of combined application of iRoot BP Plus Root Repair Material (BP-RRM) and iRoot SP Injectable Root Canal Sealer (SP-RCS) for root-end filling. MATERIAL AND METHODS: A total of 120 extracted human teeth were used in this study and were randomly divided into four groups. The BP-RRM+SP-RCS group included teeth retro-filled with combined use of BP-RRM and SP-RCS (n=45), and the BP-RRM group included teeth retro-filled by BP-RRM alone (n=45). Teeth without root-end preparation and filling were equally divided into positive control (n=15) and negative control (n=15). The apical sealing ability was evaluated by micro-CT analysis, dye penetrant examination, bacterial leakage test, and glucose leakage test. RESULTS: Micro-CT analysis showed that the total void fraction of BP-RRM+SP-RCS group was significantly lower than that of BP-RRM group, particularly at the coronal 1/3 segment of the retro-filled roots. Consistently, the maximum linear depth of dye leakage in BP-RRM+SP-RCS group was less than that of BP-RRM group. Bacterial leakage test showed that the microbial leakage in BP-RRM+SP-RCS group was significantly less than that in BP-RRM group. However, no significant difference in glucose leakage between BP-RRM+SP-RCS group and BP-RRM group was observed. CONCLUSION: Combined use of BP-RRM and SP-RCS for root-end filling promotes apical sealing in vitro. CLINICAL RELEVANCE: Combined use of BP-RRM and SP-RCS for root-end filling exhibited better apical sealing as compared to BP-RRM alone in vitro, and this may help reducing technical sensitivity and promoting clinical efficiency during endodontic microsurgery.

Comparison of the efficacy of three different supplementary cleaning protocols in root-filled teeth with a bioceramic sealer after retreatment-a micro-computed tomographic study.

OBJECTIVE: The present study evaluated the efficacy of three different supplementary cleaning protocols on the removal of bioceramic-based root canal filling materials from oval-shaped canals. MATERIALS AND METHODS: A total of 36 human mandibular premolars were instrumented and obturated with gutta-percha and iRoot SP using the single-cone technique. Retreatment was performed with ProTaper Universal retreatment files. The samples were randomly divided into the following supplementary cleaning protocols: conventional syringe irrigation (CSI), passive ultrasonic irrigation (PUI), and XP-endo Finisher R (XPR). The samples underwent micro-CT scanning to quantify the amount of residual filling materials after retreatment and after performing the cleaning protocols. The volume of filling material removal was analyzed by one-way analysis of variance and post hoc Bonferroni and Games-Howell tests (P < 0.05). RESULTS: There were significant differences in the amount of root canal filling material removal in every comparison group (P < 0.05). The XPR removed significantly more residual filling materials (P < 0.01) followed by PUI and CSI (P < 0.05). Similar efficacy was found in the total root canal and all root thirds. CONCLUSIONS: The additional use of XP-endo Finisher R and passive ultrasonic irrigation effectively removed the bioceramic-obturated root filling materials from the oval-shaped canals. However, none of the techniques completely removed the filling materials. CLINICAL RELEVANCE: The XP-endo Finisher R and passive ultrasonic irrigation exhibited greater efficacy compared with syringe irrigation in the reduction of residual filling materials after retreatment in root-filled teeth with a bioceramic sealer.

A comparative study of dentinal tubule penetration and the retreatability of EndoSequence BC Sealer HiFlow, iRoot SP, and AH Plus with different obturation techniques.

OBJECTIVES: This study aimed to evaluate dentinal tubule penetration and the retreatability of EndoSequence BC Sealer HiFlow (HiFlow), iRoot SP, and AH Plus when using the single-cone (SC) or continuous wave condensation (CWC) technique. MATERIALS AND METHODS: Sixty-five single-rooted teeth were instrumented and randomly divided into 5 groups: group 1, AH Plus/CWC; group 2, iRoot SP/CWC; group 3, iRoot SP/SC; group 4, HiFlow/CWC; and group 5, HiFlow/SC. The ability to re-establish patency during endodontic retreatment was recorded, as was the time taken to reach the working length. Dentinal tubule penetration and remaining debris after retreatment were evaluated by confocal microscopy and scanning electron microscopy. Data were analyzed by Kruskal-Wallis test and Dunn's multiple comparisons test (α = 0.05). RESULTS: The HiFlow/CWC and iRoot SP/CWC groups required more time to reach the working length than groups that underwent the SC technique regardless of the sealer used (P < .05). The HiFlow/CWC group showed a significantly higher percentage of sealer penetration area than that of the iRoot SP/SC at 4 mm from the apex (P < .05) and penetrated deeper into dentinal tubules than iRoot SP/SC at both 8-mm and 12-mm levels (P < .05). Moreover, the HiFlow/CWC and HiFlow/SC groups demonstrated less remaining sealer along the canal wall than AH Plus/CWC group at 4-mm level (P < .05). CONCLUSIONS: HiFlow/CWC technique showed better performance in dentinal tubule penetration than that of iRoot SP/SC. Both HiFlow and iRoot SP combined with CWC technique groups required more retreatment time than the other groups. Furthermore, using HiFlow with either the CWC or SC technique left less remaining sealer at 4-mm level than using AH Plus with the CWC technique during retreatment. CLINICAL RELEVANCE: With favorable performance in dentinal tubule penetration and retreatability in endodontic retreatment, the combined use of EndoSequence BC Sealer HiFlow with the recommended continuous wave condensation technique may be a worthwhile choice in root canal treatment.

The effect of two endodontic sealers and interval before post-preparation and cementation on the bond strength of fiber posts.

OBJECTIVES: To evaluate the effect of different endodontic sealers (epoxy resin-based and bioceramic-based) and the time of post-cementation on the bond strength of a fiber post cemented with resin cement. METHODS: Forty human premolars were instrumented and divided into 4 groups. According to the type of sealer and the time of post-cementation: AH-IM (AH Plus, post-cemented immediately after root canal treatment), SP-IM (iRoot SP, post-cemented immediately after root canal treatment), AH-OW (AH Plus, post-cementation after one week), and SP-OW (iRoot SP, post-cementation after one week). In each group, the samples were submitted to push-out test, and failure mode was assessed. Levene's test, one-way ANOVA, and Kruskal-Wallis analysis were applied for statistical analysis (α = 5%). RESULTS: The highest mean push-out bond strength was obtained from the SP-IM group in the apical part (10.45 ± 5.15MPa), while the lowest was observed in samples from the AH-OW group in the middle part (2.63 ± 1.54 MPa). One-way ANOVA showed that within the same root region, the time of post-cementation had a negative influence on the bonding strength in the SP groups in the middle and apical portion (P<0.05), however, when comparing the effect of type of sealers on bonding strength between the OW groups or IM groups within the same root region, no significant difference was observed regardless of the post cementation time (P>0.05). CONCLUSIONS: The bond strength of the fiber post was higher when the post was cemented immediately after root canal treatment when the bioceramic sealer was applied. CLINICAL RELEVANCE: The correct choice of an endodontic sealer and the proper time of post-cementation may help to obtain the best quality of post-and-core restoration.

Effects of iRoot SP on osteogenic differentiation of human stem cells from apical papilla.

BACKGROUND: Research shows that nano-bioceramics can modulate the differentiation of dental stem cells. The novel ready-to-use calcium-silicate-based root-canal sealer iRoot SP is widely used in root filling. Accordingly, the aim of this study was to evaluate the effects of iRoot SP on proliferation and osteogenic differentiation in human stem cells from the apical papilla (hSCAPs). METHODS: hSCAPs were isolated and characterized in vitro, then cultured with various concentrations of iRoot SP extract. Cell proliferation was assessed by CCK-8 assay, and scratch-wound-healing assays were performed to evaluate cell-migration capacity. hSCAPs were then cultured in osteogenic medium supplemented with iRoot SP extracts. Alkaline phosphatase (ALP) activity assay was used to evaluate ALP enzyme levels. Alizarin red staining and cetylpyridinium chloride (CPC) assays were performed to assess calcified-nodule formation and matrix-calcium accumulation of hSCAPs. The mRNA and protein expression levels of the osteogenic markers OCN, OSX, Runx2, and DSPP were determined by qRT-PCR and Western blotting. The data were analyzed using one-way ANOVA and LSD-t tests. RESULTS: iRoot SP at low concentrations (2, 0.2, and 0.02 mg/mL) is nontoxic to hSCAPs. iRoot SP at concentrations of 0.02 and 0.2 mg/mL significantly increases cell-migration capacity. In terms of osteogenic differentiation, 0.2 mg/mL iRoot SP promotes intracellular ALP activity and the formation of mineralized nodules. Moreover, the expression of osteogenic markers at the mRNA and protein levels are upregulated by iRoot SP. CONCLUSION: iRoot SP is an effective filling material for periapical bone regeneration.

Comparison of the efficacy of laser-activated and ultrasonic-activated techniques for the removal of tricalcium silicate-based sealers and gutta-percha in root canal retreatment: a microtomography and scanning electron microscopy study.

BACKGROUND: Tricalcium silicate-based sealers have been usually indicated for the single-cone technique and result in more residual filling materials in root canal retreatment. Passive ultrasonic irrigation and photon-initiated photoacoustic streaming have been reported to improve the removal efficacy of root canal filling materials. However, the abilities of both techniques combined with NiTi re-instrumentation to remove residual tricalcium silicate-based sealer and gutta-percha have not been compared. The aim of this study was to evaluate the efficacy of laser-activated and ultrasonic-activated techniques in vitro for the removal of the tricalcium silicate-based sealer iRoot SP and gutta-percha after standard canal retreatment procedures with the use of nickel-titanium (NiTi) rotary instruments.

Effect of Intracanal Medicaments on the Bond Strength of Bioceramic Root Filling Materials to Oval Canals.

AIM: This study aimed to evaluate the effect of the prior application of intracanal medicaments on the bond strength of OrthoMTA (mineral trioxide aggregate) and iRoot SP to the root dentin. MATERIALS AND METHODS: Thirty single-rooted mandibular premolars were standardized and prepared using ProTaper rotary files. The specimens were divided into a control group and two experimental groups receiving Diapex and Odontopaste medicament, either filled with iRoot SP or OrthoMTA, for 1 week. Each root was sectioned transversally, and the push-out bond strength and failure modes were evaluated. The data were analyzed using Kruskal Wallis and Mann-Whitney U post hoc test. RESULTS: There was no significant difference between the bond strength of iRoot SP and OrthoMTA without medicaments and with the prior placement of Diapex (p value > 0.05). However, iRoot SP showed significantly higher bond strength with the prior placement of Odontopaste (p value < 0.05). Also, there was no association between bond strength of OrthoMTA with or without intracanal medicament (p value > 0.05) and between failure mode and root filling materials (p value > 0.05). The prominent failure mode for all groups was cohesive. CONCLUSION: Prior application of Diapex has no effect on the bond strength of iRoot SP and OrthoMTA. However, Odontopaste improved the bond strength of iRoot SP. CLINICAL SIGNIFICANCE: Dislodgment resistance of root canal filling from root dentin could be an indicator of the durability and prognosis of endodontic treated teeth.

Post-obturation pain following the use of carrier-based system with AH Plus or iRoot SP sealers: a randomized controlled clinical trial.

OBJECTIVES: The aim of this study was to compare the postoperative pain after root canal treatment using a carrier-based obturation system and two different sealers. MATERIALS AND METHODS: In this prospective randomized clinical trial, 160 patients were selected. Patients with vital and devital teeth were randomized into four groups using a randomized block design with block sizes of 10 patients each. The groups were devital/vital teeth treated with iRoot SP sealer and devital/vital teeth treated with AH Plus sealer. Patients were prescribed ibuprofen, a 200-mg analgesic, if needed, and postoperative pain was recorded by visual analogue scale at 6, 12, 24, and 72 h after obturation. Pain score and frequency of tablet intake were recorded and statistically analyzed. RESULTS: Results showed that there was no significant difference between groups in the incidence of postoperative pain; however, iRoot SP sealer was associated with less analgesic intake compared to AH Plus sealer. CONCLUSION: The use of different sealers did not significantly affect pain levels. CLINICAL RELEVANCE: iRoot SP sealer was associated with less analgesic intake compared to AH Plus sealer.

Influence of iRoot SP and mineral trioxide aggregate on the activation and polarization of macrophages induced by lipopolysaccharide.

BACKGROUND: Biomaterials could affect the inflammation reaction and wound healing via the activation and polarization of macrophages. However, the influence of iRoot SP and mineral trioxide aggregate (MTA) on macrophage polarization under inflammatory conditions was not reported although these two root filling materials have been applied extensively in patients undergoing endodontic treatment. Therefore, the present study aimed to explore the mechanism how iRoot SP and MTA affect the cell behavior of RAW 264.7 macrophages when stimulated by lipopolysaccharide (LPS) in vitro. METHODS: The gene expression of three main related pro-inflammatory cytokines (IL-1ß, TNF-α, IL-6) was examined by quantitative real-time polymerase chain reaction (qRT-PCR) in RAW 264.7 macrophages when stimulated by iRoot SP and MTA in the presence of LPS. The protein expression of the M1 and M2 phenotype specific markers, CD11c and CD206, was assessed by immunofluorescence and flow cytometry in RAW 264.7 macrophages. RESULTS: LPS promoted the expression of IL-1ß, TNF-α, and IL-6 in RAW 264.7 macrophages as compared to the control group. Both iRoot SP and MTA were significantly able to enhance the expression of IL-1ß, TNF-α, and IL-6 in RAW 264.7 macrophages as compared to LPS group. LPS could increase the expression of CD11c as compared to the control group while iRoot SP and MTA were able to enhance the expression of both CD11c and CD206 as compared to LPS group. CONCLUSIONS: iRoot SP and MTA could potentially promote the release of pro-inflammatory cytokines in RAW 264.7 macrophages and induce into M1/M2 phenotype when cultured with LPS.

Comparative Evaluation of Cytotoxicity and Genotoxicity of Two Bioceramic Sealers on Fibroblast Cell Line: An in vitro Study.

AIM: The purpose of this study was to evaluate and compare the cytotoxicity and genotoxicity of two bioceramic root canal sealers: EndoSequence BC and iRoot SP with zinc oxide eugenol sealers on fibroblast cell line. MATERIALS AND METHODS: The sealers tested were zinc oxide eugenol, EndoSequence BC, and iRoot SP. Each material was mixed according to the manufacturer's instructions and mounted into sterile polyethylene color-coded rings, for cytotoxicity and genotoxicity evaluation. After 48 hours, the set materials were transferred to previously marked wells and cytotoxicity evaluation to L929 murine fibroblast cells was done by 3-(4,5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide (MTT) assay. The percentages of viable cells were then calculated and values were statistically analyzed by Kruskal-Wallis test. The evaluation of genotoxicity of the materials to L929 murine fibroblast cells was carried out by Comet assay. To quantify deoxyribonucleic acid (DNA) damage, the following comet parameters were evaluated in the assay using Comet scoring software: tail length, tail moment, and Olive moment. The values were statistically analyzed using Kruskal-Wallis test with a significance value set to p < 0.05. RESULTS: The results of the study showed that both cytotoxicity and genotoxicity evaluation by MTT assay and Comet assay can be done on L929 murine fibroblast cell line. Among the three tested materials, zinc oxide eugenol showed maximum cytotoxicity to the cells (30.64% viable cells), followed by EndoSequence BC (71.33% viable cells) and iRoot SP (75.11% viable cells). The evaluation of DNA damage by genotoxicity assessment showed iRoot SP to be least genotoxic followed closely by EndoSequence BC. Zinc oxide eugenol was genotoxic and induced more DNA damage on the fibroblast cell line studied. The statistical analyses for both the assays were nonsignificant. CONCLUSION: All the three tested sealers showed varying degrees of cytotoxicity and genotoxicity while using fibro-blast cell line. Zinc oxide eugenol was most toxic in both the assays and iRoot SP showed least toxicity, followed closely by EndoSequence BC.

Dentinal tubule penetration of AH Plus, iRoot SP, MTA fillapex, and guttaflow bioseal root canal sealers after different final irrigation procedures: A confocal microscopic study.

BACKGROUND AND OBJECTIVE: Varied physical and chemical characteristic of root canal sealers and different irrigant agitation systems can influence the depth of penetration. The aim of this in vitro study was to use a laser scanning confocal microscope in order to assess the dentinal tubules penetration of various sealers after the application of different final irrigation techniques. STUDY DESIGN/MATERIALS AND METHODS: A total of 156 single-rooted extracted mandibular premolars were prepared up to size 40 and randomly distributed into four groups according to the sealer type (n = 39): AH Plus, iRoot SP, MTA Fillapex, and GF Bioseal. Each group was randomly subdivided into three groups according to the final irrigation protocol (n = 13): conventional needle irrigation (CI), photon-induced-photoacoustic streaming activation (PIPS), and passive ultrasonic irrigation (PUI). After the final irrigation procedures, the root canals were obturated with single gutta-percha and labeled sealer mixed with 0.1% fluorescent rhodamine B isothiocyanate. Specimens were sectioned at 2, 5, and 8 mm from the apex, and all the sections were examined under confocal microscope to calculate the dentinal tubule penetration area. Data were analyzed using three-way analysis of variance and Tukey's post hoc tests (P = 0.05). RESULTS: iRoot SP exhibited a significantly higher penetration area than the other groups (P < 0.001), although there were no statistically significant differences between AH Plus, MTA Fillapex, and GF Bioseal (P > 0.05). Er:YAG laser activation with PIPS and PUI had significantly higher penetration than CI (P < 0.001). Statistically significant differences were also determined at each root canal third (coronal > middle > apical; P < 0.001). CONCLUSIONS: The dentinal tubule penetration area was significantly affected by the selection of root canal sealer, final irrigation procedure, and root canal third. Use of iRoot with PIPS tip or PUI seems advantageous in dentinal tubule penetration.

Evaluation of the filling ability of artificial lateral canals using calcium silicate-based and epoxy resin-based endodontic sealers and two gutta-percha filling techniques.

AIM: To evaluate the ability of a calcium silicate-based sealer (iRoot SP) and an epoxy resin-based sealer (Topseal) using two gutta-percha filling techniques to fill artificial lateral canals (ALCs). METHODOLOGY: Seventy single-rooted human teeth were selected. Ten of these were used to obtain pilot data. Three ALCs were produced on mesial and distal surfaces of each root, one in each third, using size 10 engine reamers. The roots were randomly assigned to four experimental groups according to the filling technique and sealer used: 1, cold gutta-percha (single-point technique) with iRoot SP (SP-iR); 2, cold gutta-percha (single-point technique) with Topseal (SP-T); 3, continuous wave of condensation technique with iRoot SP (CWC-iR); and 4, continuous wave of condensation technique with Topseal (CWC-T). Digital periapical radiographs were taken. After the sealer had set, the roots were demineralized, cleared in methyl-salicylate and examined under a stereomicroscope. The depth of penetration of sealer and/or gutta-percha into the ALC was scored using a 5-point system, conducting an analysis on four surfaces. Filling scores of 0-1 were considered not acceptable, whilst scores of 2-4 were considered acceptable. Pearson's chi-square test was used to compare the experimental groups (P < 0.05). RESULTS: CWC-T was associated with the highest acceptable filling (57.8%), followed by CWC-iR (53.3%), SP-T (48.9%) and SP-iR (36.7%). Only when SP-iR was compared to the other groups, was the difference significant (P < 0.05). The apical third was associated with the lowest acceptable filling (37.5%). It was followed, in ascending order, by the middle (51.6%) and coronal thirds (58.3%). These differences were significant only when the apical thirds were compared to the other root thirds (P < 0.05). CONCLUSION: The calcium silicate-based sealer with continuous wave of condensation was more effective in artificial filling lateral canals than the single-point technique. The epoxy resin-based sealer with both filling techniques was effective in artificial filling lateral canals.

In vitro comparison of induction capacity and biomineralization ability of mineral trioxide aggregate and a bioceramic root canal sealer.

AIM: To compare the effect of mineral trioxide aggregate (MTA) and iRoot SP, a bioceramic root canal sealer, on the cell viability, hard tissue deposition capacity and odontogenic differentiation of human tooth germ stem cells (hTGSCs). METHODOLOGY: The dental materials MTA, iRoot SP and Dycal were packed into Teflon rings and placed on transwell inserts for toxicity evaluations by the MTS assay on days 3 and 7. Dycal was used as a positive control for the cell viability assay. Teflon rings were cocultured with hTGSCs, followed by the induction of odontogenic differentiation. The odontogenic differentiation of hTGSCs and biomineralization ability of the materials were evaluated by analysing the mRNA expression levels of dentine sialophosphoprotein (DSPP) and collagen type 1A (COL1A) by real-time polymerase chain reaction expression analysis, measurement of alkaline phosphatase (ALP) activity and visualization of calcium deposits by von Kossa staining. RESULTS: MTA and iRoot SP exhibited no cytotoxicity, but Dycal caused cytotoxicity (P < 0.05) of almost all of the cells after 7 days. MTA significantly stimulated (P < 0.05) the odontogenic differentiation of hTGSCs compared with iRoot SP. MTA and iRoot SP increased (P < 0.05) the mRNA levels of COL1A and DSPP mRNA compared with noninduced hTGSCs, which served as a negative control (NC). iRoot SP, however, significantly decreased (P < 0.05) COL1A and DSPP mRNA expression levels compared with the PC. CONCLUSION: MTA and iRoot SP induced hTGSC differentiation into odontoblast-like cells, but MTA might provide more inductive potential and hard tissue deposition compared with iRoot SP.

Outcome of root canal treatment using warm vertical compaction with bioceramic and resin-based sealers: A randomised clinical trial.

This study aimed to compare the effect of a bioceramic sealer (iRoot SP) and a resin-based sealer (AH Plus) on the outcome of root canal treatment in a 2-year follow-up. Seventy-six teeth with irreversibly or necrotic pulp were recruited. After instrumentation and disinfection, the root canals were obturated using warm vertical compaction with iRoot SP (n = 43) or AH Plus (n = 33). Patients were followed up by clinical and radiographic examination at 6 12 and 24 months with recall rates of 84.2%, 65.8% and 48.7%, respectively. During each recall session, the success rates were 80%, 85.2% and 85% in the iRoot SP group and 82.8%, 91.3% and 88.2% in the AH Plus group. The success rates of the two groups did not differ significantly (p > 0.05). The bioceramic sealer resulted in a similar clinical performance and success rate to the resin-based sealer in endodontic treatment during a 2-year follow-up.

Evaluation of Sealer Remnants Using a Bioceramic Sealer Single-cone Technique after Post Space Preparation and its Influence on the Adhesion of Fibre Posts in vitro.

OBJECTIVE: To compare calcium silicate-based endodontic sealer and epoxy resin-based sealer remnants on root canal walls after post space preparation and their influence on the bond strength of fibre posts fixed with a dual-cured resin cement. METHODS: Thirty-six extracted single-root mandibular premolars were instrumented and divided randomly into two equal groups with different endodontic sealers. iRoot SP (Innovative BioCeramix, Vancouver, Canada) was employed in the experimental group and AH Plus (Dentsply Sirona, Charlotte, NC, USA) was used in the control group. Sealer remnants were observed under an endodontic microscope after root canal therapy and post space preparation. Fibre posts were fixed with dual-cured resin cement. Specimens were taken at each third of the post space. The push-out bond strength was measured using a universal testing machine and fracture modes were assessed. Statistical analysis was performed using an independent samples t test and one-way analysis of variance. RESULTS: There was no statistically significant difference in bond strength of fibre posts between the control and experimental group (P > 0.05); however, sealer remnants were observed in 38.9% of the samples treated with iRoot SP and none of the samples treated with AH Plus. The major fracture mode in samples treated with iRoot SP was adhesive failure between the resin cement and the post, and no adhesive failure between the resin cement and dentine occurred at the site of the sealer remnant. The presence of iRoot SP remnants on the root canal walls after post space preparation did not interfere with bonding. CONCLUSION: iRoot SP is a viable option for root canal obturation before fibre post cementation.

Effect of using calcium-silicate and silicone based root canal sealers in bulk or with main core material on bond strength.

Background: The purpose of this study was to assess the push-out bond strength of calcium-silicate and silicone based root canal sealers in bulk and with main cone. Methods: Roots (n=48) randomly divided into 4 groups (n=12) according to the obturation protocol; (1) iRoot SP in bulk; (2) iRoot SP with gutta-percha; (3) GuttaFlow Bioseal in bulk; (4) GuttaFlow Bioseal with gutta-percha. Six horizontal sections were obtained from each root (n=72). Effect of sealers on bond strength was statistically significant (P<0.05). Results: Highest mean value was obtained in iRoot-Bulk group and lowest in GuttaFlow Bioseal-GP group. Both iRoot SP groups had significantly higher bond strength values than both GuttaFlow Bioseal groups (P<0.05). There was no significant difference between iRoot-GP and iRoot-Bulk groups (P=0.603) also GuttaFlow Bioseal-GP and GuttaFlow Bioseal-Bulk groups (P=0.684). Conclusion: Based on findings, using calcium silicate-based sealer in bulk can be also suitable in clinical practice.

Clinical outcome of bioceramic sealer iRoot SP extrusion in root canal treatment: a retrospective analysis.

BACKGROUND: During the obturation procedure, sealer extrusion occurs in some cases. iRoot SP is a kind of bioceramic sealer with superior physicochemical and biological properties. This article reports the outcome of iRoot SP extrusion in root canal treatment and the potential factors associated with the outcome. METHODS: Ninety-nine patients and one hundred and eighty-five teeth treated between 2014 and 2020 were included in this retrospective study. All of the cases were filled with a single-cone technique and the iRoot SP sealer. The minimum follow-up visit period was 1 year. The outcome was evaluated by clinical examination and radiographic examination at recall and was classified as healed, healing (success), or not healed (failure). RESULTS: The overall success rate of all teeth was 96.8%. The success rate of adequately filled teeth was 97.3%, while that of iRoot SP extrusion was 95.8%; the difference was not statistically significant. Factors such as gender, age, tooth position, follow-up visit period, size of periapical lesion, treatment type and extruding sealer amount had no influence on the outcome of iRoot SP extruded teeth. CONCLUSIONS: The results suggested that iRoot SP extrusion has no adverse effect on the outcome of root canal treatment, which may contribute to the endodontic treatment.