Impression management attenuates the effect of ability on trust in economic exchange.

Are competent actors still trusted when they promote themselves? The answer to this question could have far-reaching implications for understanding trust production in a variety of economic exchange settings in which ability and impression management play vital roles, from succeeding in one's job to excelling in the sales of goods and services. Much social science research assumes an unconditional positive impact of an actor's ability on the trust placed in that actor: in other words, competence breeds trust. In this report, however, we challenge this assumption. Across a series of experiments, we manipulated both the ability and the self-promotion of a trustee and measured the level of trust received. Employing both online laboratory studies (n = 5,606) and a field experiment (n = 101,520), we find that impression management tactics (i.e., self-promotion and intimidation) can substantially backfire, at least for those with high ability. An explanation for this effect is encapsuled in attribution theory, which argues that capable actors are held to higher standards in terms of how kind and honest they are expected to be. Consistent with our social attribution account, mediation analyses show that competence combined with self-promotion decreases the trustee's perceived benevolence and integrity and, in turn, the level of trust placed in that actor.

Long-term treatment with ganaxolone for seizures associated with cyclin-dependent kinase-like 5 deficiency disorder: Two-year open-label extension follow-up.

OBJECTIVE: In the placebo-controlled, double-blind phase of the Marigold study (NCT03572933), ganaxolone significantly reduced major motor seizure frequency (MMSF) in patients with cyclin-dependent kinase-like 5 deficiency disorder (CDD). We report 2-year safety and clinical outcomes data from the open-label extension (OLE) phase of Marigold. METHODS: Patients with CDD who completed the double-blind phase were eligible to continue in the OLE. Efficacy assessments included MMSF reduction from prerandomization baseline, responder rates, and Clinical Global Impression-Improvement scores, including assessment of seizure intensity and duration (CGI-CSID). Safety assessments included treatment-emergent adverse events (TEAEs) and TEAEs leading to discontinuation. RESULTS: Of 101 patients who enrolled in Marigold, 88 (87.1%) entered the OLE (median age = 5 years, 79.5% female). Median 28-day MMSF at baseline was 50.6. At 2 years in the OLE (months 22-24), MMSF was reduced by a median of 48.2% (n = 50); when missing data were imputed, median reduction in MMSF was 43.8% using a mixed effects model and 27.4% using a last observation carried forward model. During months 22-24, 23 of 50 (46.0%) patients experienced reductions in MMSF of ≥50%; 12 of 50 (24.0%) patients experienced MMSF reductions of ≥75%. During months 22-24, 40 of 49 (81.6%) patients were rated by caregivers as having improvement in seizure-related outcomes based on CGI-CSID scores. Thirty-seven patients discontinued ganaxolone due to lack of efficacy (n = 13), withdrawal by caregiver (n = 12), adverse event (n = 10), physician decision (n = 1), or death (n = 1; unrelated to study drug). The most common treatment-related TEAEs were somnolence (17.0%), seizure (11.4%), and decreased appetite (5.7%). Patients reported serious TEAEs (n = 28, 31.8%); those reported in ≥3% of patients were seizure (n = 6), pneumonia (n = 5), acute respiratory failure (n = 3), aspiration pneumonia (n = 3), and dehydration (n = 3). SIGNIFICANCE: Sustained reductions in MMSF at 2 years in the OLE support the efficacy of ganaxolone in seizures associated with CDD. Safety findings in the OLE were consistent with the double-blind phase.

Optimizing the fermentation parameters in the Lactic Acid Fermentation of Legume-based Beverages- a statistically based fermentation.

BACKGROUND: The market for beverages is highly changing within the last years. Increasing consumer awareness towards healthier drinks led to the revival of traditional and the creation of innovative beverages. Various protein-rich legumes were used for milk analogues, which might be also valuable raw materials for refreshing, protein-rich beverages. However, no such applications have been marketed so far, which might be due to unpleasant organoleptic impressions like the legume-typical "beany" aroma. Lactic acid fermentation has already been proven to be a remedy to overcome this hindrance in consumer acceptance. RESULTS: In this study, a statistically based approach was used to elucidate the impact of the fermentation parameters temperature, inoculum cell concentration, and methionine addition on the fermentation of lupine- and faba bean-based substrates. A total of 39 models were found and verified. The majority of these models indicate a strong impact of the temperature on the reduction of aldehydes connected to the "beany" impression (e.g., hexanal) and on the production of pleasantly perceived aroma compounds (e.g., ß-damascenone). Positively, the addition of methionine had only minor impacts on the negatively associated sulfuric compounds methional, dimethyl sulfide, dimethyl disulfide, and dimethyl trisulfide. Moreover, in further fermentations, the time was added as an additional parameter. It was shown that the strains grew well, strongly acidified the both substrates (pH ≤ 4.0) within 6.5 h, and reached cell counts of > 9 log10 CFU/mL after 24 h. Notably, most of the aldehydes (like hexanal) were reduced within the first 6-7 h, whereas pleasant compounds like ß-damascenone reached high concentrations especially in the later fermentation (approx. 24-48 h). CONCLUSIONS: Out of the fermentation parameters temperature, inoculum cell concentration, and methionine addition, the temperature had the highest influence on the observed aroma and taste active compounds. As the addition of methionine to compensate for the legume-typical deficit did not lead to an adverse effect, fortifying legume-based substrates with methionine should be considered to improve the bioavailability of the legume protein. Aldehydes, which are associated with the "beany" aroma impression, can be removed efficiently in fermentation. However, terminating the process prematurely would lead to an incomplete production of pleasant aroma compounds.

Utilizing Laser-Induced Fluorescence to Evaluate the Efficiency of Carbon Dioxide and Diode Lasers in Dentin Sealing after Tooth Preparation: An in-vitro Study.

Adhesive dentistry has made it feasible to design restorations with high aesthetic qualities and little invasiveness. However, the freshly cut dentin after the tooth preparation needs to be sealed to prevent its contaminations, bacterial leakage, and hypersensitivity. Consequently, the immediate dentin sealing (IDS) method has been advised. This study examines different dentinal tubule sealing methods via CO2 laser, diode laser (980-nm) and a two-step self-etch adhesive system applied directly to the fresh cut dentin preceding the placement of the provisional phase. The sealing efficiency of each laser and bond system was evaluated based on the laser-induced fluorescence (LIF) properties and image analysis by scanning electron microscopy. Moreover, the obtained LIF spectra were evaluated using partial least square progression. A two-step adhesive containing a high concentration of S-PRG fillers produced a thick layer that was not perfectly uniform at all sites due to uneven filler distribution in the bond with totally and partially closed dentinal tubules. However, the peaks of the LIF spectra dropped after applying laser because of its sealing effectiveness. Accordingly, CO2 and diode lasers have strong evidence in dentinal tubule sealing and a definitive treatment modality for dentinal hypersensitivity. Moreover, IDS with an adhesive system is superior in occluding dentinal tubules in a biomimetic manner based on its filler content and bioactive properties.

The dimensional structure of the Camouflaging Autistic Traits Questionnaire (CAT-Q) and predictors of camouflaging in a representative general population sample.

OBJECTIVES: Some autistic people "camouflage" their differences by modeling neurotypical behaviors to survive in a neurotypical-dominant social world. It remains elusive whether camouflaging is unique to autism or if it entails similar experiences across human groups as part of ubiquitous impression management (IM). Here we examined camouflaging engagement and theoretical drivers in the general population, drawing on the transactional IM framework and contextualizing findings within both contemporary autism research and the past IM literature. METHODS: A large representative U.S. general population sample (N = 972) completed this survey study. We combined exploratory item factor analysis and graph analysis to triangulate the dimensional structure of the Camouflaging Autistic Traits Questionnaire (CAT-Q) and examined its correspondence with prior autism-enriched psychometric findings. We then employed hierarchical regression and elastic-net regression to identify the predictors of camouflaging, including demographic (e.g., age, gender), neurodivergence (i.e., autistic and ADHD traits), socio-motivational, and cognitive factors. RESULTS: We found a three-factor/dimensional structure of the CAT-Q in the general population, nearly identical to that found in previous autism-enriched samples. Significant socio-motivational predictors of camouflaging included greater social comparison, greater public self-consciousness, greater internalized social stigma, and greater social anxiety. These camouflaging drivers overlap with findings in recent autistic camouflaging studies and prior IM research. CONCLUSIONS: The novel psychometric and socio-motivational evidence demonstrates camouflaging as a shared social coping experience across the general population, including autistic people. This continuity guides a clearer understanding of camouflaging and has key implications for autism scholars, clinicians, and the broader clinical intersecting with social psychology research. Future research areas are mapped to elucidate how camouflaging/IM manifests and functions within person-environment transactions across social-identity and clinical groups.

Patient Impression of Improvement 1 year After Sacrospinous Hysteropexy Versus Vaginal Hysterectomy in Women with Pelvic Organ Prolapse Stage 2 or Higher.

INTRODUCTION AND HYPOTHESIS: Patient-reported outcomes are relevant outcomes in studies on pelvic organ prolapse (POP) surgery, as anatomical recurrence alone does not have a significant correlation with perceived improvement. In the present study, the patient's impression of improvement after 1 year is studied after vaginal hysterectomy (VH) versus sacrospinous hysteropexy (SSH) in large cohorts from daily clinical practice. We hypothesize that there is no difference between the groups. METHODS: This is a secondary analysis on prospectively collected data in a multicenter cohort of patients who underwent VH or SSH for symptomatic POP. All patients had a POP-Q stage ≥ 2 in at least one compartment at baseline and were treated with VH or SSH between 2002 and 2019. The primary outcome was the patient-reported score on the patient global impression of improvement index (PGI-I) 1 year after surgery. The secondary outcome was a composite outcome of surgical success, defined as the absence of recurrent POP beyond the hymen with bothersome bulge symptoms and/or repeat surgery. RESULTS: A total of 378 women (196 VH and 182 SSH) were included. The median score on the PGI-I did not differ between VH and SSH. At 1 year post-operatively, 77 women after VH (73%) and 77 women after SSH (75%) considered their condition (very) much improved (p = 0.86). There was no difference in composite outcome of surgical success (126 out of 137 women [92%] after VH, 118 out of 125 women [94%] after SSH; p = 0.44). CONCLUSIONS: Our study shows that there was no difference in the type of surgery, VH or SSH, with regard to the patient's impression of improvement 1 year postoperatively in a large cohort from daily clinical practice.

Accuracy of edentulous full-arch implant impression: An in vitro comparison between conventional impression, intraoral scan with and without splinting, and photogrammetry.

OBJECTIVES: The purpose of this in vitro study was to compare the trueness and precision of complete arch implant impressions using conventional impression, intraoral scanning with and without splinting, and stereophotogrammetry. MATERIALS AND METHODS: An edentulous model with six implants was used in this study. Four implant impression techniques were compared: the conventional impression (CI), intraoral scanning (IOS) without splinting, intraoral scanning with splinting (MIOS), and stereophotogrammetry (SPG). An industrial blue light scanner was used to generate the baseline scan from the model. The CI was captured with a laboratory scanner. The reference best-fit method was then applied in the computer-aided design (CAD) software to compute the three-dimensional, angular, and linear discrepancies among the four impression techniques. The root mean square (RMS) 3D discrepancies in trueness and precision between the four impression groups were analyzed with a Kruskal-Wallis test. Trueness and precision between single analogs were assessed using generalized estimating equations. RESULTS: Significant differences in the overall trueness (p = .017) and precision (p < .001) were observed across four impression groups. The SPG group exhibited significantly smaller RMS 3D deviations than the CI, IOS, and MIOS groups (p < .05), with no significant difference detected among the latter three groups (p > .05). CONCLUSIONS: Stereophotogrammetry showed superior trueness and precision, meeting misfit thresholds for implant-supported complete arch prostheses. Intraoral scanning, while accurate like conventional impressions, exhibited cross-arch angular and linear deviations. Adding a splint to the scan body did not improve intraoral scanning accuracy.

Influence of scanning protocol on the accuracy of complete-arch digital implant scans: An in vitro study.

OBJECTIVE: This in-vitro study assessed the influence of two intraoral scanning (IOS) protocols on the accuracy (trueness and precision) of digital scans performed in edentulous arches. METHODS: Twenty-two abutment-level master casts of edentulous arches with at least four implants were scanned repeatedly five times, each with two different scanning protocols. Protocol A (IOS-A) consisted of scanning the edentulous arch before inserting the implant scan bodies, followed by their insertion and its subsequent digital acquisition. Protocol B (IOS-B) consisted of scanning the edentulous arch with the scan bodies inserted from the outset. A reference scan from each edentulous cast was obtained using a laboratory scanner. Trueness and precision were calculated using the spatial fit analysis, cross-arch distance, and virtual Sheffield test. Statistical analysis was performed using generalized estimating equations (GEEs). Statistical significance was set at α = .05. RESULTS: In the spatial fit test, the precision of average 3D distances was 45 µm (±23 µm) with protocol IOS-A and 25 µm (±10 µm) for IOS-B (p < .001), and the trueness of average 3D distances was 44 µm (±24 µm) with protocol IOS-A and 24 µm (±7 µm) for IOS-B (p < .001). Cross-arch distance precision was 59 µm (±53 µm) for IOS-A and 41 µm (±43 µm) for IOS-B (p = .0035), and trueness was 64 µm (±47 µm) for IOS-A and 50 µm (±40 µm) for IOS-B (p = .0021). Virtual Sheffield precision was 286 µm (±198 µm) for IOS-A and 146 µm (±92 µm) for IOS-B (p < .001), and trueness was 228 µm (±171 µm) for IOS-A and 139 µm (±92 µm) for IOS-B (p < .001). CONCLUSIONS: The IOS-B protocol demonstrated significantly superior accuracy. Placement of scan bodies before scanning the edentulous arch is recommended to improve the accuracy of complete-arch intraoral scanning.

No evidence for an other-race effect in dominance and trustworthy judgements from faces.

A variety of evidence shows that social categorization of people based on their race can lead to stereotypical judgements and prejudicial behaviour. Here, we explore the extent to which trait judgements of faces are influenced by race. To address this issue, we measured the reliability of first impressions for own-race and other-race faces in Asian and White participants. Participants viewed pairs of faces and were asked to indicate which of the two faces was more dominant or which of the two faces was more trustworthy. We measured the consistency (or reliability) of these judgements across participants for own-race and other-races faces. We found that judgements of dominance or trustworthiness showed similar levels of reliability for own-race and other-race faces. Moreover, an item analysis showed that the judgements on individual trials were very similar across participants from different races. Next, participants made overall ratings of dominance and trustworthiness from own-race and other-race faces. Again, we found that there was no evidence for an ORE. Together, these results provide a new approach to measuring trait judgements of faces and show that in these conditions there is no ORE for the perception of dominance and trustworthiness.

Anchoring has little effect when forming first impressions of facial attractiveness.

First impressions based on facial appearance affect our behaviour towards others. Since the same face will appear different across images, over time, and so on, our impressions may not be equally weighted across exposures but are instead disproportionately influenced by earlier or later instances. Here, we followed up on previous work which identified an anchoring effect, whereby higher attractiveness ratings were given to a person after viewing naturally varying images of their face presented in descending (high-to-low), rather than ascending (low-to-high), order of attractiveness of these images. In Experiment 1 (n = 301), we compared these 'descending' and 'ascending' conditions for unfamiliar identities by presenting six-image sequences. Although we found higher attractiveness ratings for the 'descending' condition, this small effect equated to only 0.22 points on a 1-7 response scale. In Experiment 2 (n = 307), we presented these six-image sequences in a random order and found no difference in attractiveness ratings given to these randomly ordered sequences when compared with those resulting from both our 'descending' and 'ascending' conditions. Further, we failed to detect an influence of the earlier images in these random sequences on attractiveness ratings. Taken together, we found no compelling evidence that anchoring could have an effect on real-world impression formation.

Exploring the potential of ChatGPT as an adjunct for generating diagnosis based on chief complaint and cone beam CT radiologic findings.

AIM: This study aimed to assess the performance of OpenAI's ChatGPT in generating diagnosis based on chief complaint and cone beam computed tomography (CBCT) radiologic findings. MATERIALS AND METHODS: 102 CBCT reports (48 with dental diseases (DD) and 54 with neoplastic/cystic diseases (N/CD)) were collected. ChatGPT was provided with chief complaint and CBCT radiologic findings. Diagnostic outputs from ChatGPT were scored based on five-point Likert scale. For diagnosis accuracy, the scoring was based on the accuracy of chief complaint related diagnosis and chief complaint unrelated diagnoses (1-5 points); for diagnosis completeness, the scoring was based on how many accurate diagnoses included in ChatGPT's output for one case (1-5 points); for text quality, the scoring was based on how many text errors included in ChatGPT's output for one case (1-5 points). For 54 N/CD cases, the consistence of the diagnosis generated by ChatGPT with pathological diagnosis was also calculated. The constitution of text errors in ChatGPT's outputs was evaluated. RESULTS: After subjective ratings by expert reviewers on a five-point Likert scale, the final score of diagnosis accuracy, diagnosis completeness and text quality of ChatGPT was 3.7, 4.5 and 4.6 for the 102 cases. For diagnostic accuracy, it performed significantly better on N/CD (3.8/5) compared to DD (3.6/5). For 54 N/CD cases, 21(38.9%) cases have first diagnosis completely consistent with pathological diagnosis. No text errors were observed in 88.7% of all the 390 text items. CONCLUSION: ChatGPT showed potential in generating radiographic diagnosis based on chief complaint and radiologic findings. However, the performance of ChatGPT varied with task complexity, necessitating professional oversight due to a certain error rate.

Comprehensive and integrated management of basilar impression, platybasia and cranio-vertebral junction abnormality- a case report.

AIM: To report a case of anomalous development of base of skull (platybasia, Basilar invagination and C1-C2 vertebral fusion); and emphasize nonsurgical management in inoperable cases that can improve quality of life of the patient. MATERIALS AND METHODS: The case is reported as a descriptive study of a 17-year-old female who presented to a rural teaching tertiary care hospital in Wardha, Maharashtra, India; with chief complaints of weakness in all four limbs since 10 years of age. RESULT AND CONCLUSION: Platybasia is a developmental defect of the occipital bone and upper cervical spine resulting from anomalous development. The mechanism of such anomalies is not known; however, the most accepted theory includes abnormal basi-occiput development. The pressure effects may present signs similar to progressive spastic paralysis, cerebellar symptoms, or cranial nerve palsy, in addition to musculoskeletal symptoms. It is, therefore, crucial for physicians and radiologists to be familiar with clinical manifestations and radiological findings. In the following case of a patient with base of skull anomalies, surgical intervention in view of progressive worsening of motor symptoms was advised, however, the guardians declined the same due to high risk involved. Due to financial constraints, genetic studies were unaffordable, and a lack of awareness regarding the disease hampered the guardians from making a decision on the definite management of the disease. Besides radical neurosurgery, intensive physiotherapy can prove vital in significantly improving the quality of life for the patient.

Clinical comparative study on the accuracy of palatal rugae in models obtained by different impression materials and intraoral scanning.

OBJECTIVE: Palatal rugae are frequently used in the evaluation of tooth movement after treatment in orthodontics and as a stable region in superimposition. It is important to note that the impression method and material used to record the rugae region affect the accuracy of the impression. The aim of this study is to compare the accuracy of palatal rugae, in three-dimensional (3D) by employing both conventional and digital impression methods. MATERIALS AND METHODS: In this study, 22 patients (12 females, 10 males) mean age of 13.5 ± 1.7 years old were selected with complete permanent dentition. Three different impressions were taken from the maxillae of the patients: conventional impression using silicone rubber impression material, conventional impression using alginate impression material, and optical impression using an intraoral scanner. The impressions' digital data were analyzed by the GOM Inspect (Version 2018, Braunschweig, Germany), a 3D analysis software. The Root Mean Square (RMS) values of the total ruga region were evaluated in this software. The data were statistically analyzed using the Jamovi program. The Kruskal-Wallis test and Mann-Whitney U test were performed due to the non-normal distribution of the data. RESULTS: There is no statistically significant difference between the comparison points of the right and left rugae's medial and lateral points and total rugae regions' RMS values. Although there was no statistically significant difference, the total RMS values of alginate and digital scan measurements showed closer results than the RMS values of silicone and digital scan measurements. CONCLUSION: The study found that there was no statistically significant difference in the total RMS values of the ruga region between traditional and digital impression methods. CLINICAL RELEVANCE: The treatment period in orthodontics is long. Different impression materials and methods can be used for diagnostic, mid-treatment, and final impressions. For superimpositions and treatment and post-treatment palatal ruga evaluations, traditional and digital impression methods are clinically acceptable and can be used as alternatives to each other.

An innovative evaluation method for clinical comparative analysis of occlusal contact regions obtained via intraoral scanning and conventional impression procedures: a clinical trial.

OBJECTIVES: To compare the occlusal contact regions (OCRs) obtained through an intraoral scanning system and conventional impression procedures via an innovative evaluation method. MATERIALS AND METHODS: Fifteen participants with complete dentitions and stable centric occlusion were included. Three groups were created based on the technique used to obtain the OCRs of quadrant posterior teeth at the maximal intercuspal position: 100 µm articulating paper (Control), an intraoral scanner (Test 1, T1) and conventional impression procedure (Test 2, T2). OCRs of control group were digitized by the intraoral scanner, while all conventional impressions were cast and digitized by an extraoral scanner. The virtual occlusal records of the 2 test groups were obtained by buccal bite registration. The OCRs within 100 µm in the 3 groups were three-dimensionally superimposed based on the tooth surfaces and the area of OCRs (SC, ST1, ST2) was calculated. The area of overlapping OCRs (SO) between the test groups and the control group was calculated. In the two test groups, the consistency rate of OCRs (SO/SC) and the positive rate of OCRs (SO/ST) were calculated and compared. For occlusal tightness evaluation, the mean occlusal clearances (OC) as well as minimum OC between the upper and lower models were calculated and compared. RESULTS: The consistency rate of OCRs was 0.73 ± 0.17 for T1 group and 0.23 ± 0.13 for T2 group (p < 0.001). The positive rate of OCRs was 0.67 ± 0.15 for T1 group and 0.56 ± 0.23 for T2 group (p = 0.143). The mean OC was 51.32 ± 16.04 µm for T1 group and 68.20 ± 18.15 µm for T2 group (p = 0.024). The minimum OC was - 61.74 ± 35.38 µm for T1 group and 4.09 ± 27.15 µm for T2 group (p < 0.001). CONCLUSIONS: For obtaining occlusal records in the quadrant posterior region, the tested intraoral scanning system was more reliable for recording occlusal contact regions and showed higher occlusal tightness compared with conventional impression procedures. CLINICAL RELEVANCE: (1) The evaluation method can assist clinicians in making more objective analysis and comparisons among different sources of virtual occlusal records. (2) Occlusal tightness is a key and indispensable indicator in the evaluation of virtual occlusal records, and it can be quantified by measuring the occlusal clearance utilizing the current evaluation method.

Knowledge, attitude, and practice of dental health professionals toward dental impression disinfection protocol during the COVID-19 pandemic in Saudi Arabia- a cross-sectional study.

BACKGROUND: Despite the updated guidelines on dental impression disinfection protocols during the COVID-19 pandemic, adherence to such procedures has not been studied among dental health professionals in Saudi Arabia. Understanding DHPs' knowledge, attitudes, and practices regarding COVID-19 is crucial in assessing a willingness to adhere to the recommendations provided by health authorities in mitigating the spread of COVID-19 via dental impressions impacting patient safety and infection control measures. Hence, this study aimed to assess dental health professionals' (DHPs) knowledge, attitudes, and practices (KAP) toward dental impression disinfection protocol during the COVID-19 pandemic in Saudi Arabia. METHODS: A cross-sectional study using an online survey was conducted from 14 December 2022 to 21 March 2023 among practicing dentists, dental assistants (DA), dental laboratory technicians (DT), and dental hygienists in Saudi Arabia. A validated and reliable questionnaire that consisted of 38 items along with demographic variables was prepared to collect the data. Using Google Forms, a questionnaire link was prepared and shared on the social media platforms of DHPs in Saudi Arabia. A descriptive analysis was conducted to report the percentages and frequencies. The mean knowledge, attitude, and practice scores were analyzed using an Independent t-test, ANOVA, and Pearson's correlation tests. RESULTS: A total of 718 DHPs voluntarily participated in the survey. Most of the DHPs exhibited average knowledge 392 (54.6%), neutral attitudes 393(54.7%), and adequate 549 (76.5%) practice towards dental impression disinfection protocol. The mean knowledge score differed significantly across nationality (p = 0.013), type of DHPs (p < 0.001), qualification (p = 0.045), and experience (p = 0.028) of the study participants. Significant differences in attitude towards impression disinfection were observed in different age groups (p = 0.002), qualifications (p = 0.015), and experiences (p = 0.024) of the DHPs. Similarly, practice varied across different age groups (p = 0.010), nationality (p = 0.013), type of DHPs (p = 0.019), qualification (p = 0.044), experience (p = 0.041), and COVID-19 Infection (p = 0.006). Moreover, a significant positive correlation between knowledge-attitude (r = 0.258, p < 0.01), knowledge-practice (r = 0.283, p < 0.01), and attitude-practice (r = 0.196, p < 0.01) was observed. CONCLUSION: DHPs considered in this study demonstrated average knowledge and attitudes toward impression disinfection, requiring improvement through continuous dental education and training. However, they displayed acceptable dental impression disinfection practices during the COVID-19 pandemic. It is highly recommended that continuing education programs should mainly reinforce the knowledge of sodium hypochlorite, iodophor, and phenolics and their concentrations to be used as an impression disinfectant. Additionally, it should focus on techniques of disinfecting elastomeric, hydrocolloid, zinc oxide and eugenol, and impression compound materials to mitigate the spread of COVID-19 based on Saudi ministry of health guidelines.

Innovative Solutions for Worn Fingerprints: A Comparative Analysis of Traditional Fingerprint Impression and 3D Printing.

Fingerprint recognition systems have achieved widespread integration into various technological devices, including cell phones, computers, door locks, and time attendance machines. Nevertheless, individuals with worn fingerprints encounter challenges when attempting to unlock original fingerprint systems, which results in disruptions to their daily activities. This study explores two distinct methods for fingerprint backup: traditional fingerprint impression and 3D printing technologies. Unlocking tests were conducted on commonly available optical fingerprint lock-equipped cell phones to assess the efficacy of these methods, particularly in unlocking with worn fingerprints. The research findings indicated that the traditional fingerprint impression method exhibited high fidelity in reproducing fingerprint patterns, achieving an impressive unlocking success rate of 97.8% for imprinting unworn fingerprints. However, when dealing with worn fingerprints, the traditional fingerprint impression technique showed a reduced unlocking success rate, progressively decreasing with increasing degrees of finger wear. In contrast, 3D-printed backup fingerprints, with image processing and optimization of ridge height, mitigated the impact of fingerprint wear on the unlocking capability, resulting in an unlocking success rate of 84.4% or higher. Thus, the utilization of 3D printing technology proves advantageous for individuals with severely worn or incomplete fingerprints, providing a viable solution for unforeseen circumstances.

Care partner-informed meaningful change thresholds for the Clinical Dementia Rating-Sum of Boxes for trials of early Alzheimer's disease.

INTRODUCTION: Consensus definitions of meaningful within-patient change (MWPC) on the Clinical Dementia Rating-Sum of Boxes (CDR-SB) are needed. Existing estimates use clinician-rated anchors in clinically diagnosed Alzheimer's disease (AD) populations. Incorporating the care partner perspective offers important insights, and evaluating biomarker-confirmed cohorts aligns estimates with ongoing trials. METHODS: Anchor-based analyses were conducted to evaluate MWPC on the CDR-SB in early AD (Tauriel; NCT03289143) using Caregiver Global Impression of Change in memory or daily activities. RESULTS: Across time points and anchors, mean CDR-SB changes associated with the "somewhat worse" category ranged from 1.50 to 2.12 in early AD, 1.07 to 2.06 in mild cognitive impairment-AD, and 1.79 to 2.25 in mild AD. DISCUSSION: The proposed ranges are appropriate to define meaningful progression on the CDR-SB in similar cohorts and support the interpretation of treatment benefit through MWPC analyses. Thresholds should be calibrated to the context of use; lower/higher thresholds may be applicable in studies of earlier/later disease over shorter/longer durations. HIGHLIGHTS: Within-patient CDR-SB change thresholds are provided using caregiver-rated anchors. 1.5 to 2.5 points may be an appropriate range in early AD trials of similar durations. Cumulative distribution function plots illustrate the benefit of a given treatment. When selecting thresholds, the target population and study design should be considered.

A prospective study evaluating the adhesive tape impression for the diagnosis of dermatophytosis in dogs and cats.

BACKGROUND: Potential contagion and zoonotic risk make rapid diagnosis of dermatophytosis important amongst companion animals. HYPOTHESIS/OBJECTIVES: To compare the adhesive tape impression (ATI), trichogram, Wood's lamp (WL) examination and fungal culture for diagnosis of dermatophytosis, and the ATI and trichogram for ease of use. ANIMALS: Five dogs and 15 cats with consistent lesions, history and at least two positive dermatophyte test results. MATERIALS AND METHODS: After WL examination, one representative lesion per patient was sampled for ATI, trichogram and fungal culture. Microscopic detection of fungal elements on ATI and trichogram were objectively and subjectively compared. The ability of all tests to correctly detect dermatophytosis, and the ability of ATI and trichogram to detect fungal elements in >20 high-powered fields (HPF) were compared using Fisher's exact tests. RESULTS: ATI, trichogram, fungal culture and WL were positive in 100% (20 of 20), 90% (18 of 20), 95% (19 of 20) and 65% (13 of 20) of patients, respectively, with a significant difference between WL and ATI (p = 0.0499). Fungal culture revealed Microsporum. canis (n = 16), Nannizzia gypsea (n = 1), Trichophyton mentagrophytes (n = 1) and T. rubrum (n = 1). Fungal elements were detected in >20 HPF more frequently with ATI (18 of 20) than trichogram (11 of 20) (p = 0.017), and detection required careful scanning to distinguish from background debris more often with trichogram. Fungal elements were located with neutrophil clusters and keratinocyte rafts in addition to abnormal hair fragments more frequently on ATI. CONCLUSIONS AND CLINICAL RELEVANCE: ATI had the highest ability to correctly diagnose dermatophytosis, and increased ease of detecting fungal elements compared to trichogram.

Virtual implant scan body switch by using computer-aided design programs avoiding the need of obtaining a new intraoral implant digital scan: A novel protocol.

OBJECTIVE: The present manuscript describes a technique to virtually switch an implant scan body eliminating the need of obtaining a new intraoral implant digital scan. CLINICAL CONSIDERATIONS: Implant scan bodies assist on transferring the 3-dimensional position of the implants into the virtual definitive implant cast. However, if a different implant part is desired during the designing procedures of the implant restoration such as selecting a different implant abutment of varying height, angulation, or manufacturer, a new intraoral implant digital scan with the specific implant scan body is required. CONCLUSIONS: This novel protocol aims to reduce possible complications that require capturing a new intraoral implant digital scan, facilitate prostheses design modifications after the obtention of the definitive intraoral implant digital scan, and to ease the manufacturing procedures. CLINICAL SIGNIFICANCE: The novel technique may provide a solution for virtually switch implant scan bodies for fabricating implant-supported single crowns or short-span prostheses. Additional studies are needed before its clinical implementation.

In vitro comparison of accuracy between conventional and digital impression using elastomeric materials and two intra-oral scanning devices.

AIM: The aim of this study was to compare the accuracy of full-arch conventional implant impressions using two different materials (A-silicone and polyether) to full-arch digital implant impressions produced from two intraoral scanning devices. MATERIALS AND METHODS: A master model was fabricated representing an edentulous mandible with four implants with internal connection placed at the sites of canines and first molars. The anterior implants were parallel to the residual ridge, while the two posterior implants had an angulation of 15° to the distal and 15° to the lingual respectively. The conventional technique was performed with open-tray of non-splinted impression copings. Two different impression materials were used, A-silicone and polyether at monophase medium body consistencies. The digital impressions were obtained with the use of two different intraoral scanners, after the connection of scan bodies. A total of 10 impressions were produced for each of the four experimental groups. The conventional models as well as the master model were digitized using a high-resolution laboratory scanner. The STL files of the models and of the intraoral impressions were imported in a powerful superimposition software, for the conduction of measurements in pairs of files. The software calculated the 3D deviations, as well as the linear and angular displacements among scan bodies at the digital files. For "trueness" measurements every STL file of each experimental group was superimposed to the digital master model, while for "precision" measurements all STL files of each experimental group were superimposed to each other. RESULTS AND CONCLUSIONS: The accuracy of full arch mandibular implant impressions was influenced both by the impression technique used (conventional vs. digital) and the impression material used (A-silicone vs. polyether) or the intraoral scanner used (Trios vs. Heron). In terms of "trueness," A-silicone showed the highest impression accuracy with the lowest deviation values, followed by polyether and Trios, but the differences between the three groups were in the majority not statistically significant. Heron showed statistically lower accuracy results in all measurements compared to the other groups. In terms of "precision", conventional impressions with the use of A-Silicone or polyether were statistically significantly superior to digital impressions with either scanner. A-Silicone and polyether showed no statistically significant difference between them.