In situ reduced graphene-based aerogels embedded with gold nanoparticles for real-time humidity sensing and toxic dyes elimination.

Hybrid aerogels are promising candidates for energy storage, biosensing, and medical applications, but the conventional fabrication methods, being time-consuming and complex, limit their widespread utilization. The critical issues affecting their functionality include the un-controllable particle dispersity, loading of active materials, and the porosity. We report a simple and efficient method to synthesize in situ reduced Au nanoparticles@graphene (Au@graphene) hybrid aerogel using near-infrared radiation (NIR), resulting the uniform loading of well-dispersed Au nanoparticles (Au-NPs) as well as in situ reduction of graphene oxide (GO) with enhanced conductivity. The concentration of iso-propylacrylamide and GO can be adjusted to control the aerogel pore size during the freeze-drying process. Reduction of HAuCl4 and GO to high extent under NIR light was confirmed with advanced characterization techniques. Density functional theory based calculations with generalized gradient-corrected functional (GGA/PW91) in the hybrid aerogel system, and dnd basis sets are used for the confirmation of possible interactions between the GO, Au-NPs, and the polymer. The as-designed highly porous and conductive aerogel shows an excellent humidity response (30-97%) and successfully removes the methylene blue pollutant from the aqueous solution to a high extent (90%). Therefore, Au@graphene hybrid aerogel is potentially an exciting candidate for a wide range of applications in the humidity sensing and biomedical disease detection.

Microstructure and Mechanical Properties of Magnesium Matrix Composites Reinforced by In Situ Reduced Graphene Oxide.

Due to their excellent mechanical properties and large specific surface area, graphene and its derivatives are widely used in metal matrix composites as reinforcements. In this study, the thermal reduction behavior of large-size graphene oxide are investigated systematically, and reduced graphene oxide (RGO) with few residual oxygen groups and good structural integrity is obtained. ZK61 matrix composites with varying content of in situ RGO are fabricated using the semi-powder metallurgy method. The results reveal that the addition of RGO can cause the refinement of the grains and the second phase, which is attributed to the uniform distribution of the RGO throughout the matrix. The formation of nano-MgO particles is beneficial in increasing the interfacial bonding strength between the RGO and the matrix, resulting in simultaneous increments in yield strength and elongation in the RGO/ZK61 composites. The composite containing 0.6 wt.% RGO shows a superior mechanical property, including microhardness of 79.9 HV, yield strength of 203 MPa and excellent elongation of 17.5%, with increases of 20.9%, 8.6% and 7.4%, respectively, when compared with the ZK61 alloy. Quantitative analysis indicates that the main strengthening mechanisms of RGO-reinforced magnesium matrix composites are load transfer strengthening and grain refinement strengthening.