General Synthesis of Metal Indium Sulfide Atomic Layers for Photocatalysis.

The metal indium sulfides have attracted extensive research interest in photocatalysis due to regulable atomic configuration and excellent optoelectronic properties. However, the synthesis of metal indium sulfide atomic layers is still challenging since intrinsic non-van-der-Waals layered structures of some components. Here, a surfactant self-assembly growth mechanism is proposed to controllably synthesize metal indium sulfide atomic layers. Eleven types of atomic layers with tunable compositions, thickness, and defect concentrations are successfully achieved namely In2S3, MgIn2S4, CaIn2S4, MnIn2S4, FeIn2S4, ZnIn2S4, Zn2In2S5, Zn4In16S33, CuInS2, CuIn5S8, and CdIn2S4. The typical CaIn2S4 shows a defect-dependence activity for CO2 photoreduction. The designed S vacancies in CaIn2S4 can serve as catalytic centers to activate CO2 molecules via localized electrons for π-back-donation. The engineered S vacancies tune the non-covalent interaction with CO2 and intermediates, manages to tune the free energy, and lower the reaction energy barrier. As a result, the defect-rich CaIn2S4 displays 2.82× improved reduction rate than defect-poor CaIn2S4. Meantime, other components also display promising photocatalytic performance, such as Zn2In2S5 with a H2O2 photosynthesis rate of 292 µmol g-1 h-1 and CuInS2 with N2-NH4 + conversion rate of 54 µmol g-1 h-1. This work paves the way for the multidisciplinary exploration of metal indium sulfide atomic layers with unique photocatalysis properties.

Developing In2S3 upon modified MgTiO3 anchored on nitrogen-doped CNT for sustainable sensing and removal of toxic insecticide clothianidin.

Herein, the study introduces a novel bifunctional In2S3/MgTiO3/TiO2@N-CNT (IMTNC) nanocomposite, which is poised to revolutionize the detection and removal of clothianidin (CLD) from aquatic environments by synergistic adsorption and photodegradation. Confirmation of the material's synthesis was done using structural, optical, morphological, and chemical characterizations. An outstanding sensitivity of 2.168 µA/nM.cm2 with a linear range of 4-100 nM and a LOD of 0.04 nM, along with an exceptional elimination efficiency of 98.06 ± 0.84% for about 10 ppm CLD within 18 min was demonstrated by the IMTNC nanocomposite. Extensive studies were carried out to appraise the material's effectiveness in the presence of various interfering species, such as cations, anions, organic compounds, and different water matrices, and a comprehensive assessment of its stability throughout several cycles was made. Response Surface Methodology (RSM) study was used to determine the ideal removal conditions for improved performance. In addition, the catalytic performance in removing various other pollutants was also analyzed. Adding In2S3 and developing N-doped Carbon Nanotubes (N-CNT) increased conductivity and higher electrochemical sensing skills, improving charge transfer and increasing photocatalytic activity. This research underscores the potential of the IMTNC nanocomposite as a promising candidate for advanced environmental sensing and remediation applications.

Z-Scheme In2 S3 /NU-1000 Heterojunction for Boosting Photo-Oxidation of Sulfide into Sulfoxide under Ambient Conditions.

Photocatalytic oxidation of sulfide into sulfoxide has attracted extensive attention as an environmentally friendly strategy for chemical transformations or toxic chemicals degradation. Herein, we construct a series of In2 S3 /NU-1000 heterojunction photocatalysts, which can efficiently catalyze the oxidation of sulfides to form sulfoxides as the sole product under LED lamp (full-spectrum) illumination in air at room temperature. Especially, the sulfur mustard simulant, 2-chloroethyl ethyl sulfide (CEES), can also be photocatalytically oxidized with In2 S3 /NU-1000 to afford nontoxic 2-chloroethyl ethyl sulfoxide (CEESO) selectively and effectively. In contrast, individual NU-1000 and In2 S3 show very low catalytic activity on this reaction. The significantly improved photocatalytic activity is ascribed to the constructing of an efficient Z-scheme photocatalysts In2 S3 /NU-1000, which exhibits the enhancement of light harvesting, the promotion of photogenerated electron-hole separation, and the retention of high porosity of the parent MOF. Moreover, mechanism studies in photocatalytic oxidation reveal that the superoxide radical (. O2 - ) and singlet oxygen (1 O2 ) are the main oxidative species in the oxidation system. This work exploits the opportunities for the construction of porous Z-scheme photocatalysts based on the photoactive MOFs materials and inorganic semiconductors for promoting catalytic organic transformations. More importantly, it provides a route to the rational design of efficient photocatalysts for the detoxification of mustard gas.

Light-Driven Syngas Production over Defective ZnIn2 S4 Nanosheets.

Photocatalytic syngas (CO and H2 ) production with CO2 as gas source not only ameliorates greenhouse effect, but also produces valuable chemical feedstocks. However, traditional photocatalytic systems require noble metal or suffers from low yield. Here, we demonstrate that S vacancies ZnIn2 S4 (VS -ZnIn2 S4 ) nanosheets are an ideal photocatalyst to drive CO2 reduction into syngas. It is found that building S vacancies can endow ZnIn2 S4 with stronger photoabsorption, efficient electron-hole separation, and larger CO2 adsorption, finally promoting both hydrogen evolution reaction (HER) and CO2 reduction reaction (CO2 RR). The syngas yield of CO and H2 is therefore significantly increased. In contrast to pristine ZnIn2 S4 , the syngas yield over VS -ZnIn2 S4 can be improved by roughly ≈4.73 times and the CO/H2 ratio is modified from 1:4.18 to 1:1. Total amount of syngas after 12 h photocatalysis is as high as 63.20 mmol g-1 without use of any noble metals, which is even higher than those of traditional noble metal-based catalysts in the reported literatures. This work demonstrates the critical role of S vacancies in mediating catalytic activity and selectivity, and highlights the attractive ability of defective ZnIn2 S4 for light-driven syngas production.

Copper's Role in the Photoluminescence of Ag1- xCu xInS2 Nanocrystals, from Copper-Doped AgInS2 ( x ∼ 0) to CuInS2 ( x = 1).

A series of Ag1- xCu xInS2 nanocrystals (NCs) spanning from 0 ≤ x ≤ ∼1 was synthesized by partial cation exchange to identify copper's contributions to the electronic structure and spectroscopic properties of these NCs. Discrete midgap states appear above the valence band upon doping AgInS2 NCs with Cu+ (small x). Density functional theory calculations confirm that these midgap states are associated with the 3d valence orbitals of the Cu+ impurities. With increasing x, these impurity d levels gradually evolve to become the valence-band edge of CuInS2 NCs, but the highest-occupied orbital's description does not change significantly across the entire range of x. In contrast with this gradual evolution, Ag1- xCu xInS2 NC photoluminescence shifts rapidly with initial additions of Cu+ (small x) but then becomes independent of x beyond x > ∼0.20, all the way to CuInS2 ( x = 1.00). Data analysis suggests small but detectable hole delocalization in the luminescent excited state of CuInS2 NCs, estimated by Monte Carlo simulations to involve at most about four copper ions. These results provide unique insights into the luminescent excited states of these materials and they reinforce the description of CuInS2 NCs as "heavily copper-doped NCs" in which photogenerated holes are rapidly localized in copper 3d-based orbitals.

Quantum Dot-Catalyzed Photoreductive Removal of Sulfonyl-Based Protecting Groups.

This Communication describes the use of CuInS2 /ZnS quantum dots (QDs) as photocatalysts for the reductive deprotection of aryl sulfonyl-protected phenols. For a series of aryl sulfonates with electron-withdrawing substituents, the rate of deprotection for the corresponding phenyl aryl sulfonates increases with decreasing electrochemical potential for the two electron transfers within the catalytic cycle. The rate of deprotection for a substrate that contains a carboxylic acid, a known QD-binding group, is accelerated by more than a factor of ten from that expected from the electrochemical potential for the transformation, a result that suggests that formation of metastable electron donor-acceptor complexes provides a significant kinetic advantage. This deprotection method does not perturb the common NHBoc or toluenesulfonyl protecting groups and, as demonstrated with an estrone substrate, does not perturb proximate ketones, which are generally vulnerable to many chemical reduction methods used for this class of reactions.

Zinc Thiolate Enables Bright Cu-Deficient Cu-In-S/ZnS Quantum Dots.

Copper indium sulfide (CIS) colloidal quantum dots (QDs) are a promising candidate for commercially viable QD-based optical applications, for example as colloidal photocatalysts or in luminescent solar concentrators (LSCs). CIS QDs with good photoluminescence quantum yields (PLQYs) and tunable emission wavelength via size and composition control are previously reported. However, developing an understanding and control over the growth of electronically passivating inorganic shells would enable further improvements of the photophysical properties of CIS QDs. To improve the optical properties of CIS QDs, the focus is on the growth of inorganic shells via the popular metal-carboxylate/alkane thiol decomposition reaction. 1) The role of Zn-carboxylate and Zn-thiolate on the formation of ZnS shells on Cu-deficient CIS (CDCIS) QDs is studied, 2) this knowledge is leveraged to yield >90% PLQY CDCIS/ZnS core/shell QDs, and 3) a mechanism for ZnS shells grown from zinc-carboxylate/alkane thiol decomposition is proposed.

Temperature-Dependent Photoluminescence of Silver-Indium-Sulfide Nanocrystals in Aqueous Colloidal Solutions.

The temperature dependence of the photoluminescence (PL) intensity of colloidal semiconductor nanocrystals (NCs) makes them an appealing option in bio-sensing applications. Here, we probed the temperature-dependent PL behavior of aqueous glutathione (GSH)-capped Ag-In-S (AIS) NCs and their core/shell AIS/ZnS heterostructures. We show that both core and core-shell materials reveal strong PL quenching upon heating from 10 to 80 °C, which is completely reversible upon cooling. The PL quenching is assigned to the thermally activated dissociation of complexes formed by ligands with the metal cations on the NC surface and the introduction of water into the NC coordination sphere. This unique mechanism of the thermal PL quenching results in a much higher temperature sensitivity of the aqueous colloidal AIS (AIS/ZnS) NCs as compared with previously reported analogs capped by covalently bound ligands. Our results are expected to stimulate further studies on aqueous ternary NCs as colloidal luminescent nano-thermometers applicable for ratiometric temperature sensing.

Thick-Shell CuInS2/ZnS Quantum Dots with Suppressed "Blinking" and Narrow Single-Particle Emission Line Widths.

Quantum dots (QDs) of ternary I-III-VI2 compounds such as CuInS2 and CuInSe2 have been actively investigated as heavy-metal-free alternatives to cadmium- and lead-containing semiconductor nanomaterials. One serious limitation of these nanostructures, however, is a large photoluminescence (PL) line width (typically >300 meV), the origin of which is still not fully understood. It remains even unclear whether the observed broadening results from considerable sample heterogeneities (due, e.g., to size polydispersity) or is an unavoidable intrinsic property of individual QDs. Here, we answer this question by conducting single-particle measurements on a new type of CuInS2 (CIS) QDs with an especially thick ZnS shell. These QDs show a greatly enhanced photostability compared to core-only or thin-shell samples and, importantly, exhibit a strongly suppressed PL blinking at the single-dot level. Spectrally resolved measurements reveal that the single-dot, room-temperature PL line width is much narrower (down to ∼60 meV) than that of the ensemble samples. To explain this distinction, we invoke a model wherein PL from CIS QDs arises from radiative recombination of a delocalized band-edge electron and a localized hole residing on a Cu-related defect and also account for the effects of electron-hole Coulomb coupling. We show that random positioning of the emitting center in the QD can lead to more than 300 meV variation in the PL energy, which represents at least one of the reasons for large PL broadening of the ensemble samples. These results suggest that in addition to narrowing size dispersion, future efforts on tightening the emission spectra of these QDs might also attempt decreasing the "positional" heterogeneity of the emitting centers.

Probing the Crystal Structure, Composition-Dependent Absolute Energy Levels, and Electrocatalytic Properties of Silver Indium Sulfide Nanostructures.

The absolute electronic energy levels in silver indium sulfide (AIS) nanocrystals (NCs) with varying compositions and crystallographic phases have been determined by using cyclic voltammetry. Different crystallographic phases, that is, metastable cubic, orthorhombic, monoclinic, and a mixture of cubic and orthorhombic AIS NCs, were studied. The band gap values estimated from the cyclic voltammetry measurements match well with the band gap values calculated from the diffuse reflectance spectra measurements. The AIS nanostructures were found to show good electrocatalytic activity towards the hydrogen evolution reaction (HER). Our results clearly establish that the electronic and electrocatalytic properties of AIS NCs are strongly sensitive to the composition and crystal structure of AIS NCs. Monoclinic AIS was found to be the most active HER electrocatalyst, with electrocatalytic activity that is almost comparable to the MoS2 -based nanostructures reported in the literature, whereas cubic AIS was observed to be the least active of the studied crystallographic phases and compositions. In view of the HER activity and electronic band structure parameters observed herein, we hypothesize that the Fermi energy level of AIS NCs is an important factor that decides the electrocatalytic efficiency of these nanocomposites. The work presented herein, in addition to being the first of its kind regarding the composition and phase-dependence of electrochemical aspects of AIS NCs, also presents a simple solvothermal method for the synthesis of different crystallographic phases with various Ag/In molar ratios.

Short-Wave Infrared Light-Emitting Diodes Using Colloidal CuInS2 Quantum Dots with ZnI2 Dual-Passivation.

Short-wave infrared (SWIR) light-emitting diodes (LEDs) have emerged as promising technologies for diverse applications such as optical communication, biomedical imaging, surveillance, and machine vision. Colloidal quantum dots (QDs) are particularly attractive for SWIR LEDs due to their solution processability, compatibility with flexible substrates, and tunable absorption and luminescence. However, the presence of toxic elements or precious metals in most SWIR-emitting QDs poses health, environmental, and cost challenges. In this context, CuInS2 (CIS) QDs are known for low toxicity, cost-effective fabrication, and SWIR-light emitting capability. However, CIS QDs have not yet been directly utilized to fabricate SWIR LEDs to date, which is due to low particle stability, inefficient charge carrier recombination, and significantly blue-shifted luminescence after integrating into LED devices. To address challenges, we propose a dual-passivation strategy using ZnI2 as a chemical additive to enhance both the optical property of plain CIS QDs and charge carrier recombination upon LED device implementation. The resulting CIS-QD-based LEDs exhibit a stable SWIR electroluminescence (EL) peak (over 1000 nm) with a high EL radiance and a record external quantum efficiency in the SWIR region. Our study represents a significant step forward in SWIR-QLED technology, offering a pathway for the development of high-performance, low-cost, and nontoxic SWIR light sources.

Visualization of 2D and 3D Tissue Models via Size-Selected Aqueous AgInS/ZnS Quantum Dots.

Three-dimensional (3D) spheroid cell cultures of fibroblast (L929) and tumor mammary mouse (4T1) were chosen as in vitro tissue models for tissue imaging of ternary AgInS/ZnS fraction quantum dots (QDs). We showed that the tissue-mimetic morphology of cell spheroids through well-developed cell-cell and cell-matrix interactions and distinct diffusion/transport characteristics makes it possible to predict the effect of ternary AgInS/ZnS fraction QDs on the vital activity of cells while simultaneously comparing with classical two-dimensional (2D) cell cultures. The AgInS/ZnS fractions, emitting in a wide spectral range from 635 to 535 nm with a mean size from ∼3.1 ± 0.8 to ∼1.8 ± 0.4 nm and a long photoluminescence lifetime, were separated from the initial QD ensemble by using antisolvent-induced precipitation. For ternary AgInS/ZnS fraction QDs, the absence of toxicity at different QD concentrations was demonstrated on 2D and 3D cell structures. QDs show a robust correlation between numerous factors: their sizes in biological fluids over time, penetration capabilities into 2D and 3D cell structures, and selectivity with respect to penetration into cancerous and healthy cell spheroids. A reproducible protocol for the preparation of QDs along with their unique biological properties allows us to consider ternary AgInS/ZnS fraction QDs as attractive fluorescent contrast agents for tissue imaging.

Photocatalytic CO2 Reduction Using Zinc Indium Sulfide Aggregated Nanostructures Fabricated under Four Anionic Conditions.

Zinc indihuhium sulfide (ZIS), among various semiconductor materials, shows considerable potential due to its simplicity, low cost, and environmental compatibility. However, the influence of precursor anions on ZIS properties remains unclear. In this study, we synthesized ZIS via a hydrothermal method using four different anionic precursors (ZnCl2/InCl3, Zn(NO3)2/In(NO3)3, Zn(CH3CO2)2/In(CH3CO2)3, and Zn(CH3CO2)2/In2(SO4)3), resulting in distinct morphologies and crystal structures. Our findings reveal that ZIS produced from Zn(CH3CO2)2/In2(SO4)3 (ZIS-AceSO4) exhibited the highest photocatalytic CO2 reduction efficiency, achieving a CO production yield of 134 µmol g-1h-1. This enhanced performance is attributed to the formation of more zinc and indium vacancy defects, as confirmed by EDS analysis. Additionally, we determined the energy levels of the valence band maximum (VBM) and the conduction band minimum (CBM) via UPS and absorption spectra, providing insights into the band alignment essential for photocatalytic processes. These findings not only deepen our understanding of the anionic precursor's impact on ZIS properties but also offer new avenues for optimizing photocatalytic CO2 reduction, marking a significant advancement over previous studies.

Microwave-assisted synthesis of ZnS@CuInxSy for photocatalytic degradation of coloured and non-coloured pollutants.

Copper indium sulfide (CuInS2) exhibits strong visible light absorption and thus has the potential for good photocatalytic activity; however, rapid charge recombination limits its practical usage. An intriguing strategy to overcome this issue is to couple CuInS2 with another semiconductor to form a heterojunction, which can improve the charge carrier separation and, hence, enhance the photocatalytic activity. In this study, photocatalysts comprising CuInS2 with a secondary CuS phase (termed CuInxSy) and CuInxSy loaded with ZnS (termed ZnS@CuInxSy) were synthesized via a microwave-assisted method. Structural and morphological characterization revealed that the ZnS@CuInxSy photocatalyst comprised tetragonal CuInS2 containing a secondary phase of hexagonal CuS, coupled with hexagonal ZnS. The effective band gap energy of CuInxSy was widened from 2.23 to 2.71 as the ZnS loading increased from 0 to 30%. The coupling of CuInxSy with ZnS leads to long-lived charge carriers and efficient visible-light harvesting properties, which in turn lead to a remarkably high activity for the photocatalytic degradation of brilliant green (95.6% in 5 h) and conversion of 4-nitrophenol to 4-nitrophenolate ions (95.4% in 5 h). The active species involved in these photocatalytic processes were evaluated using suitable trapping agents. Based on the obtained results, photocatalytic mechanisms are proposed that emphasize the importance of h+, O2•-, and OH- in photocatalytic processes using ZnS@CuInxSy.

Photobio-electrocatalytic production of H2 using fluorine-doped tin oxide (FTO) electrodes covered with a NiO-In2S3 p-n junction and NiFeSe hydrogenase.

Clean energy vectors are needed towards a fossil fuel-free society, diminishing both greenhouse effect and pollution. Electrochemical water splitting is a clean route to obtain green hydrogen, the cleanest fuel; although efficient electrocatalysts are required to avoid high overpotentials in this process. The combination of inorganic semiconductors with biocatalysts for photoelectrochemical H2 production is an alternative approach to overcome this challenge. N-type semiconductors can be coupled to a co-catalyst for H2 production in the presence of a sacrificial electron donor in solution, but the replacement of the latter with an electrode is a challenge. In this work we attach a NiFeSe-hydrogenase with high activity for H2 production with the n-type semiconductor indium sulfide, which upon visible irradiation is able to transfer its excited electrons to the enzyme. In order to enhance the transfer of the generated holes towards the electrode for their replenishment, we have explored the inclusion of a p-type material, NiO, to induce a p-n junction for H2 production in a photoelectrochemical biocatalytic system in absence of sacrificial reagents.

Kinetic Analysis of the Cation Exchange in Nanorods from Cu2-xS to CuInS2: Influence of Djurleite's Phase Transition Temperature on the Mechanism.

In the syntheses of ternary I-III-VI2 compounds, such as CuInS2, it is often difficult to balance three precursor reactivities to achieve the desired size, shape, and atomic composition of nanocrystals. Cation exchange reactions offer an attractive two-step alternative, by producing a binary compound with the desired morphology and incorporating another atomic species postsynthetically. However, the kinetics of such cation exchange reactions, especially for anisotropic nanocrystals, are still not fully understood. Here, we present the cation exchange reaction from Cu-deficient djurleite Cu2-xS nanorods to wurtzite CuInS2, with size and shape retention. With reaction parameters in a broad temperature range between 40 °C and 160 °C, we were able to obtain various intermediates. Djurleite has a bulk phase transition temperature at 93 °C, which influences the cation exchange considerably. Below the phase transition temperature, indium is only incorporated into the surface of the nanorods, while, at temperatures above the phase transition temperature, we observe a Janus-type exchange mechanism and the formation of CuInS2 bands in the djurleite nanorods. The findings suggest that the diffusion above the phase transition temperature is strongly favored along the copper planes of the copper sulfide nanorods over the diffusion through the sulfur planes. This results in a difference of 37 kJ mol-1 in the activation energy of the cation exchange below and above the phase transition temperature.

Recent Advances in CuInS2-Based Photocathodes for Photoelectrochemical H2 Evolution.

Photoelectrochemical (PEC) H2 production from water using solar energy is an ideal and environmentally friendly process. CuInS2 is a p-type semiconductor that offers many advantages for PEC H2 production. Therefore, this review summarizes studies on CuInS2-based PEC cells designed for H2 production. The theoretical background of PEC H2 evolution and properties of the CuInS2 semiconductor are initially explored. Subsequently, certain important strategies that have been executed to improve the activity and charge-separation characteristics of CuInS2 photoelectrodes are examined; these include CuInS2 synthesis methods, nanostructure development, heterojunction construction, and cocatalyst design. This review helps enhance the understanding of state-of-the-art CuInS2-based photocathodes to enable the development of superior equivalents for efficient PEC H2 production.

Roles of CeO2 in preparing Ce-doped CdIn2S4 with boosted photocatalytic degradation performance for methyl orange and tetracycline hydrochloride.

Element doping is considered as a feasible strategy to develop efficient photocatalysts. In this study, a Ce-doped CdIn2S4 photocatalyst was prepared through a modified coprecipitation method. During the synthesis of Ce-doped CdIn2S4, the CeO2 nanorods were gradually reduced by the decomposition products of thioacetamide (TAA), and mainly existed as Ce(III) in the supernatant. This resulted in a large increase in the specific surface area of the as-obtained products, providing more exposed active sites for the reactant. Additionally, a trace amount of Ce was doped into the lattice of the CdIn2S4, resulting in a significant effect on the band structure. By tracing the roles of CeO2 during the synthesis process, a possible reaction mechanism was proposed. Benefiting from the synergistic advantages of the structural and compositional features, the optimal sample showed enhanced photocatalytic activities for the degradation of methyl orange (94.6% within 25 min) and tetracycline hydrochloride (85.6% within 120 min). The degradation rates were 13.3 times and 2.7 times higher than that of pristine CdIn2S4. This work may provide a strategy for designing metal element doped photocatalysts with good activity for pollutant removal.

Eco-Friendly Zn-Ag-In-Ga-S Quantum Dots: Amorphous Indium Sulfide Passivated Silver/Sulfur Vacancies Achieving Efficient Red Light-Emitting Diodes.

I-III-VI quantum dots (QDs) and derivatives (I, III, and VI are Ag+/Cu+, Ga3+/In3+, and S2-/Se2-, respectively) are the ideal candidates to replace II-VI (e.g., CdSe) and perovskite QDs due to their nontoxicity, pure color, high photoluminescence quantum yield (PLQY), and full visible coverage. However, the chaotic cation alignment in multielement systems can easily lead to the formation of multiple surface vacancies, highlighted as VI and VVI, leading to nonradiative recombination and nonequilibrium carrier distribution, which severely limit the performance improvement of materials and devices. Here, based on Zn-Ag-In-Ga-S QDs, we construct an ultrathin indium sulfide shell that can passivate electron vacancies and convert donor/acceptor level concentrations. The optimized In-rich 2-layer indium sulfide structure not only enhances the radiative recombination rate by preventing further VS formation but also achieves the typical DAP emission enhancement, achieving a significant increase in PLQY to 86.2% at 628 nm. Moreover, the optimized structure can mitigate the lattice distortion and make the carrier distribution in the interior of the QDs more balanced. On this basis, red QD light-emitting diodes (QLEDs) with the highest external quantum efficiency (EQE; 5.32%) to date were obtained, providing a novel scheme for improving I-III-VI QD-based QLED efficiency.

Photocatalytic H2O2 Generation over Microsphere Carbon-Assisted Hierarchical Indium Sulfide Nanoflakes via a Two-Step One-Electron Pathway.

The increasing demand for an alternative to traditional fuel has motivated intensive research and drawn more attention. H2O2 has emerged as an alternative due to its high capabilities, relatively safer nature as a fuel, and ease of transportation. The photocatalytic method is adopted to generate H2O2 using sustainable light energy to achieve an entire green system for a completely environmentally friendly process. Herein, the synthesized microsphere carbon-assisted hierarchical two-dimensional (2D) indium sulfide (In2S3) nanoflakes have been characterized thoroughly by various techniques such as X-ray diffraction (XRD), transmission electron microscope (TEM), X-ray photoelectron spectroscopy (XPS), diffuse reflectance spectra (DRS), photoluminescence (PL), and electron paramagnetic resonance (EPR). The photocatalytic performance of the In2S3-based photocatalysts can be promoted with the carbon layer assisting in facilitating the transfer of the photogenerated electrons and narrowing their band gaps. Optimized In2S3 successfully yielded 31.2 mM g-1 h-1 in the photocatalytic oxygen reduction reaction (ORR) process. Based on the results of different radical trapping experiments and different reaction conditions, the catalytic ORR process is proposed to be a two-step one-electron pathway.