CFD informed design of bench-scale experiments to characterize air entrainment into fuel beds induced by columnar vortices.

Recent experiments show that strong vortices, similar to fire whirls, can form far from a fire front in the region of smoldering fuel. These buoyancy-induced columnar vortices, visualized by entrained smolder smoke, were observed lofting hot embers into the air and in some cases lead to spot ignitions at the base of the vortex. Gaining insight on how the flow field of a buoyancy-induced columnar vortex could impact surrounding smoldering fuel is the focus of this study. Specifically, the potential air entrainment into a fuel substrate beneath the vortex. The flow field of such columnar vortices has been shown to drive air flow downward under certain conditions and, in the context of combustion, drive air deeper than typical entrainment, inducing spot ignitions and increasing burning and smolder rates. NIST's Fire Dynamics Simulator is utilized to successfully model buoyancy-induced columnar vortices. Then it is utilized to study the behavior of vortices as temperature and vorticity boundary conditions are changed. The flow field and fresh air entrainment potential are analyzed. The simulation results inform the experiment design and preliminary experimental results are presented. Understanding these high-risk phenomena will lead to better risk mitigation and more resilient Wildland-Urban interface communities.

Nonlinear theory of macroscopic flow induced in a drop of ferrofluid.

We present results of theoretical modelling of macroscopic circulating flow induced in a cloud of ferrofluid by an oscillating magnetic field. The cloud is placed in a cylindrical channel filled by a nonmagnetic liquid. The aim of this work is the development of a scientific basis for a progressive method of addressing drug delivery to thrombus clots in blood vessels with the help of the magnetically induced circulation flow. Our results show that the oscillating field can induce, inside and near the cloud, specific circulating flows with the velocity amplitude about several millimetres per second. These flows can significantly increase the rate of transport of the molecular non-magnetic impurity in the channel. This article is part of the theme issue 'Transport phenomena in complex systems (part 1)'.

Field-induced circulation flow in magnetic fluids.

In this paper, we present results of a theoretical study of circulation flow in ferrofluids under the action of an alternating inhomogeneous magnetic field. The results show that the field with the amplitude of about 17 kA m-1 and angular frequency 10 s-1 can induce mesoscopic flow with a velocity amplitude of about 0.5 mm s-1. This mechanism can be used for intensification of drag delivery in blood vessels. This article is part of the theme issue 'Patterns in soft and biological matters'.

Modelling Thermally Induced Non-Equilibrium Gas Flows by Coupling Kinetic and Extended Thermodynamic Methods.

Thermally induced non-equilibrium gas flows have been simulated in the present study by coupling kinetic and extended thermodynamic methods. Three different types of thermally induced gas flows, including temperature-discontinuity- and temperature-gradient-induced flows and radiometric flow, have been explored in the transition regime. The temperature-discontinuity-induced flow case has shown that as the Knudsen number increases, the regularised 26 (R26) moment equation system will gradually loss its accuracy and validation. A coupling macro- and microscopic approach is employed to overcome these problems. The R26 moment equations are used at the macroscopic level for the bulk flow region, while the kinetic equation associated with the discrete velocity method (DVM) is applied to describe the gas close to the wall at the microscopic level, which yields a hybrid DVM/R26 approach. The numerical results have shown that the hybrid DVM/R26 method can be faithfully used for the thermally induced non-equilibrium flows. The proposed scheme not only improves the accuracy of the results in comparison with the R26 equations, but also extends their capability with a wider range of Knudsen numbers. In addition, the hybrid scheme is able to reduce the computational memory and time cost compared to the DVM.

The energetic cost of filtration by demosponges and their behavioural response to ambient currents.

Sponges (Porifera) are abundant in most marine and freshwater ecosystems, and as suspension feeders they play a crucial role in filtering the water column. Their active pumping enables them to filter up to 900 times their body volume of water per hour, recycling nutrients and coupling a pelagic food supply with benthic communities. Despite the ecological importance of sponge filter feeding, little is known about how sponges control the water flow through their canal system or how much energy it costs to filter the water. Sponges have long been considered textbook examples of animals that use current-induced flow. We provide evidence that suggests that some species of demosponge do not use current-induced flow; rather, they respond behaviourally to increased ambient currents by reducing the volume of water filtered. Using a morphometric model of the canal system, we also show that filter feeding may be more energetically costly than previously thought. Measurements of volumetric flow rates and oxygen removal in five species of demosponge show that pumping rates are variable within and between species, with the more oxygen consumed the greater the volume filtered. Together, these data suggest that sponges have active control over the volume of water they process, which may be an adaptation to reduce the energetic cost of filtration in times of high stress.

Pneumatic Microballoons for Active Control of the Vibration-Induced Flow.

Vibration-induced flow (VIF), in which a mean flow is induced around a microstructure by applying periodic vibrations, is increasingly used as an active flow-control technique at the microscale. In this study, we have developed a microdevice that actively controls the VIF patterns using elastic membrane protrusions (microballoons) actuated by pneumatic pressure. This device enables on-demand spatial and temporal fluid manipulation using a single device that cannot be achieved using a conventional fixed-structure arrangement. We successfully demonstrated that the device achieved displacements of up to 38 µm using the device within a pressure range of 0 to 30 kPa, indicating the suitability of the device for microfluidic applications. Using this active microballoon array, we demonstrated that the device can actively manipulate the flow field and induce swirling flows. Furthermore, we achieved selective actuation of the microballoon using this system. By applying air pressure from a multi-input channel system through a connection tube, the microballoons corresponding to each air channel can be selectively actuated. This enabled precise control of the flow field and periodic switching of the flow patterns using a single chip. In summary, the proposed microdevice provides active control of VIF patterns and has potential applications in advanced microfluidics, such as fluid mixing and particle manipulation.

Swimming performance of Cyprinus carpio (Carp) in China.

Cyprinus carpio (Carp) is a fish of great economic importance in China. However, its population has declined considerably due to the construction of barrages. Thus, fishways need to be constructed at barrages to protect fish resources. It is essential for the fishway design to study the swimming performance of carp. By applying incremental flow velocities in a glass open-type flume, three indicators of swimming performance of the carp in China with the body length (BL) of 13-21 cm, including the induced flow velocity (IFV), the critical swimming speed (Ucrit) and the burst swimming speed (Uburst), are systematically assessed. The correlation between the swimming performance and the BL is also analyzed. The results indicate that the IFV of the carp is 15.56 ± 1.79 cm/s, which is not significantly influenced by the BL. The value of Ucrit varies from 60 to 82 cm/s and gradually increases with the increasing value of BL. The relative critical swimming speed (U'crit) is 4.23 ± 0.28 BL/s and gradually decreases with the increasing value of BL. The value of Uburst ranges from 77.2 to 105.1 cm/s, which is linearly positively correlated to BL. The relative burst swimming speed (U'burst) is 5.42 ± 0.39 BL/s. The value of Uburst is approximately 1.28 times of that of Ucrit for the carps with the same BL. These findings are meaningful to the further study of ecological behavior and to the fishway design and optimization of carps.

Miniature Amphibious Robot Actuated by Rigid-Flexible Hybrid Vibration Modules.

Amphibious robots can undertake various tasks in terrestrial and aquatic environments for their superior environmental compatibility. However, the existing amphibious robots usually utilize multi-locomotion systems with transmission mechanisms, leading to complex and bulky structures. Here, a miniature amphibious robot based on vibration-driven locomotion mechanism is developed. The robot has two unique rigid-flexible hybrid modules (RFH-modules), in which a soft foot and a flexible fin are arranged on a rigid leg to conduct vibrations from an eccentric motor to the environment. Then, it can run on ground with the soft foot adopting the friction locomotion mechanism and swim on water with the flexible fin utilizing the vibration-induced flow mechanism. The robot is untethered with a compact size of 75 × 95 × 21 mm3 and a small weight of 35 g owing to no transmission mechanism or joints. It realizes the maximum speed of 815 mm s-1 on ground and 171 mm s-1 on water. The robot, actuated by the RFH-modules based on vibration-driven locomotion mechanism, exhibits the merits of miniature structure and fast movements, indicating its great potential for applications in narrow amphibious environments.

A facile strategy for preparation of strong tough poly(lactic acid) foam with a unique microfibrillated bimodal micro/nano cellular structure.

This work reports the design and fabrication of strong tough poly(lactic acid) (PLA) foam by combining pressure-induced-flow (PIF) processing with supercritical CO2 foaming. PIF processing widened the foaming window of PLA to 40-120 °C, while supercritical CO2 foaming released the undesired internal stress of PLA samples with PIF processing (P-PLA). The prepared PLA foams displayed a unique microfibrillated bimodal micro/nano cellular structure which is strongly affected by saturation temperature (Ts). Both micron and nano cells showed decreasing cells size and increasing cell density as Ts elevated. The orientation factor as well as internal stress of PLA foams decreased with increased Ts. Compared with P-PLA samples, PLA foam prepared at Ts of 40 °C showed negligible reduction of orientation from 0.45 to 0.41 and release of internal stress characterized by the rightward shift of Raman peak (stretching vibration of CO bond from 1763 to 1766 cm-1). Furthermore, PLA foam prepared at Ts of 40 °C presented excellent impact strength (32.3 kJ/m2), tensile strength (42.0 MPa), and ductility (14.2%). The combination of PIF processing and supercritical CO2 foaming provides a facile and effective method to prepare strong tough PLA foam that has immense potential in biomedical, aerospace, automotive, and other structural applications.

Modeling Studies of Gravity Wave Dynamics in Highly Structured Environments: Reflection, Trapping, Instability, Momentum Transport, Secondary Gravity Waves, and Induced Flow Responses.

A compressible numerical model is applied for three-dimensional (3-D) gravity wave (GW) packets undergoing momentum deposition, self-acceleration (SA), breaking, and secondary GW (SGW) generation in the presence of highly-structured environments enabling thermal and/or Doppler ducts, such as a mesospheric inversion layer (MIL), tidal wind (TW), or combination of MIL and TW. Simulations reveal that ducts can strongly modulate GW dynamics. Responses modeled here include reflection, trapping, suppressed transmission, strong local instabilities, reduced SGW generations, higher altitude SGW responses, and induced large-scale flows. Instabilities that arise in ducts experience strong dissipation after they emerge, while trapped smaller-amplitude and smaller-scale GWs can survive in ducts to much later times. Additionally, GW breaking and its associated dynamics enhance the local wind along the GW propagation direction in the ducts, and yield layering in the wind field. However, these dynamics do not yield significant heat transport in the ducts. The failure of GW breaking to induce stratified layers in the temperature field suggests that such heat transport might not be as strong as previously assumed or inferred from observations and theoretical assessments. The present numerical simulations confirm previous finding that MIL generation may not be caused by the breaking of a transient high-frequency GW packet alone.

Laboratory testing for VITT antibodies.

Vaccine-induced immune thrombotic thrombocytopenia (VITT) is a highly prothrombotic disorder that like heparin-induced thrombocytopenia (HIT) is caused by platelet-activating antibodies that recognize platelet factor 4 (PF4). However, unlike HIT-where heparin at low concentrations (0.1-0.5 U/mL) typically enhances antibody-induced platelet activation, platelet activation by VITT sera is usually inhibited by heparin. Further, conventional platelet activation assays for HIT, such as the serotonin-release assay (SRA) and heparin-induced platelet activation (HIPA) test, often yield negative or atypical results when testing VITT sera. Nevertheless, VITT (like HIT) is a "clinical-pathological" disorder whereby laboratory detectability of platelet-activating anti-PF4 antibodies is crucial for diagnosis. VITT antibodies follow 2 fundamental principles of HIT laboratory testing: (1) high probability of a positive PF4-dependent enzyme-immunoassay (EIA), and (2) high probability of a positive platelet activation assay. However, optimal detection of VITT in platelet activation assays requires the addition of PF4, for example, PF4-enhanced SRA (PF4-SRA) and PF4-enhanced HIPA (PIPA). A novel whole blood assay, called the PF4-induced flow cytometry-based platelet activation (PIFPA) assay, exhibits high sensitivity and specificity for VITT. HIT and VITT sera/plasmas differ in their reactivity in rapid HIT immunoassays (90-97% sensitivity for HIT, <25% sensitivity for VITT), consistent with distinct antigen sites on PF4 recognized by HIT and VITT antibodies.

Testing the Validity of the Miscible-Displacement Interfacial Tracer Method for Measuring Air-Water Interfacial Area: Independent Benchmarking and Mathematical Modeling.

The interfacial tracer test (ITT) conducted via aqueous miscible-displacement column experiments is one of a few methods available to measure air-water interfacial areas for porous media. The primary objective of this study was to examine the robustness of air-water interfacial area measurements obtained with interfacial tracer tests, and to examine the overall validity of the method. The potential occurrence and impact of surfactant-induced flow was investigated, as was measurement replication. The column and the effluent samples were weighed during the tests to monitor for potential changes in water saturation and flux. Minimal changes in water saturation and flux were observed for experiments wherein steady flow conditions were maintained using a vacuum-chamber system. The air-water interfacial areas measured with the miscible-displacement method completely matched interfacial areas measured with methods that are not influenced by surfactant-induced flow. This successful benchmarking was observed for all three media tested, and over a range of saturations. A mathematical model explicitly accounting for nonlinear and rate-limited adsorption of surfactant at the solid-water and air-water interfaces as well as the influence of changes in surface tension on matric potentials and flow was used to simulate the tracer tests. The independently-predicted simulations provided excellent matches to the measured data, and revealed that the use of the vacuum system minimized the occurrence of surfactant-induced flow and its associated effects. These results in total unequivocally demonstrate that the miscible-displacement ITT method produced accurate and robust measurements of air-water interfacial area under the extant conditions.

Beneficial wake-capture effect for forward propulsion with a restrained wing-pitch motion of a butterfly.

Unlike other insects, a butterfly uses a small amplitude of the wing-pitch motion for flight. From an analysis of the dynamics of real flying butterflies, we show that the restrained amplitude of the wing-pitch motion enhances the wake-capture effect so as to enhance forward propulsion. A numerical simulation refined with experimental data shows that, for a small amplitude of the wing-pitch motion, the shed vortex generated in the downstroke induces air in the wake region to flow towards the wings. This condition enables a butterfly to capture an induced flow and to acquire an additional forward propulsion, which accounts for more than 47% of the thrust generation. When the amplitude of the wing-pitch motion exceeds 45°, the flow induced by the shed vortex drifts away from the wings; it attenuates the wake-capture effect and causes the butterfly to lose a part of its forward propulsion. Our results provide one essential aerodynamic feature for a butterfly to adopt a small amplitude of the wing-pitch motion to enhance the wake-capture effect and forward propulsion. This work clarifies the variation of the flow field correlated with the wing-pitch motion, which is useful in the design of wing kinematics of a micro-aerial vehicle.

A microfluidic chip with gravity-induced unidirectional flow for perfusion cell culture.

Perfusion flow is one of the essential elements and advantages of organ-on-a-chip technology. For example, microfluidics have enabled implementation of perfusion flow and recapitulation of fluidic environment for vascular endothelial cells. The most prevalent method of implementing flow in a chip is to use a pump, which requires elaborate manipulation and complex connections, and accompanies a large amount of dead volume. Previously we devised a gravity-induced flow system which does not require tubing connections, but this method results in bidirectional flow to enable recirculation, which is somewhat different from physiological blood flow. Here, we have developed a novel microfluidic chip that enables gravity-induced, unidirectional flow by using a bypass channel with geometry different from the main channel. Human umbilical vein endothelial cells were cultured inside the chip and the effect of flow direction was examined. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 35: e2701, 2019.

Study of Flow Characteristics of Gas Mixtures in a Rectangular Knudsen Pump.

A Knudsen pump operates under the thermal transpiration effect or the thermal edge effect on the micro-scale. Due to the uneven temperature distribution of the walls in the channel axis direction or the constant temperature of the tips on the walls, directional thermally-induced flow is generated. In this paper the Direct Simulation Monte Carlo (DSMC) method is applied for N2⁻O2 gas mixtures in the ratios of 4:1, 1:1, and 1:4 with different Knudsen numbers in a classic rectangular Knudsen pump to study the flow characteristics of the gas mixtures in the pump. The results show that the changing in the gas physical properties does not affect the distribution of the velocity field, temperature fields, or other fields in the Knudsen pump. The thermal creep effect is related to the molecular mass of the gas. Even in N2 and O2 gas mixtures with similar molecular masses, N2 can be also found to have a stronger thermal creep effect. Moreover, the lighter molecular weight gas (N2) can effectively promote the motion of the heavier gas (O2).

Adenosine-induced Flow Arrest to Facilitate Intracranial Complex Aneurysm Clip Ligation: Review of the Literature.

Complex intracranial aneurysms (CIAs) rank high among the most technically demanding neurosurgical pathologies. Microsurgery and clip ligation can be challenging in CIAs as circumferential visualization of the aneurysm, parent vessels, branches, perforators, and other neurovascular structures is important to prevent residual aneurysms or strokes from vessel or perforator occlusion. Decompression of the aneurysm sac is often required for CIAs. We reviewed the literature and PubMed advanced search showed 13 results of adenosine-induced flow arrest to facilitate intracranial complex aneurysm clip ligation which included three independent case reports and ten cases in a case series from 1999 to May 2016. Few case series have described the use of adenosine in intracranial aneurysm surgery. Satisfactory aneurysm decompression was achieved in all cases, and all aneurysms were clipped successfully. We recommend that adenosine cardiac arrest is a relatively novel method for decompression of intracranial aneurysms to facilitate clip application. With appropriate safety precautions, it is a reasonable alternative method when temporary clipping of proximal vessels is not desirable or not possible.

Numerical and Experimental Analyses of Three- Dimensional Unsteady Flow around a Micro-Pillar Subjected to Rotational Vibration.

The steady streaming (SS) phenomenon is gaining increased attention in the microfluidics community, because it can generate net mass flow from zero-mean vibration. We developed numerical simulation and experimental measurement tools to analyze this vibration-induced flow, which has been challenging due to its unsteady nature. The validity of these analysis methods is confirmed by comparing the three-dimensional (3D) flow field and the resulting particle trajectories induced around a cylindrical micro-pillar under circular vibration. In the numerical modeling, we directly solved the flow in the Lagrangian frame so that the substrate with a micro-pillar becomes stationary, and the results were converted to a stationary Eulerian frame to compare with the experimental results. The present approach enables us to avoid the introduction of a moving boundary or infinitesimal perturbation approximation. The flow field obtained by the micron-resolution particle image velocimetry (micro-PIV) measurement supported the three-dimensionality observed in the numerical results, which could be important for controlling the mass transport and manipulating particulate objects in microfluidic systems.

Surfactant-induced flow compromises determination of air-water interfacial areas by surfactant miscible-displacement.

Surfactant miscible-displacement (SMD) column experiments are used to measure air-water interfacial area (AI) in unsaturated porous media, a property that influences solute transport and phase-partitioning. The conventional SMD experiment results in surface tension gradients that can cause water redistribution and/or net drainage of water from the system ("surfactant-induced flow"), violating theoretical foundations of the method. Nevertheless, the SMD technique is still used, and some suggest that experimental observations of surfactant-induced flow represent an artifact of improper control of boundary conditions. In this work, we used numerical modeling, for which boundary conditions can be perfectly controlled, to evaluate this suggestion. We also examined the magnitude of surfactant-induced flow and its impact on AI measurement during multiple SMD flow scenarios. Simulations of the conventional SMD experiment showed substantial surfactant-induced flow and consequent drainage of water from the column (e.g., from 75% to 55% SW) and increases in actual AI of up to 43%. Neither horizontal column orientation nor alternative boundary conditions resolved surfactant-induced flow issues. Even for simulated flow scenarios that avoided surfactant-induced drainage of the column, substantial surfactant-induced internal water redistribution occurred and was sufficient to alter surfactant transport, resulting in up to 23% overestimation of AI. Depending on the specific simulated flow scenario and data analysis assumptions used, estimated AI varied by nearly 40% and deviated up to 36% from the system's initial AI. We recommend methods for AI determination that avoid generation of surface-tension gradients and urge caution when relying on absolute AI values measured via SMD.

Influences of slip and Cu-blood nanofluid in a physiological study of cilia.

OBJECTIVE: The objective of this paper is to study the influences of slip and Cu-blood nanofluid in a physiological study of cilia. DESIGN/METHODOLOGY/APPROACH: The right wall and the left wall possess metachronal wave that is traveling along the outer boundary of the channel. The features of ciliary structures are determined by the dominance of viscous effects over inertial effects using the long wavelength approximation. The flow possessions for the viscous nano fluid are solved as a function of the cilia and metachronal wave velocity. Mathematica numerical simulation is used to calculate pressure rise. Exact solutions are calculated for the temperature and for the velocity profile. FINDINGS: Numerical integration has been implemented to get the expression of pressure rise. Graphical results have been offered for pressure rise, temperature and stream function for various physical parameters of interest. Symmetry of the curved channel is recovered for larger values of the curvature parameter. It is found from the graphs of the pressure rise that reflux case occurs for increasing values of curvature and velocity slip parameter. It is also found that temperature decreases for increasing values of nanoparticle volume fraction. Basically, higher thermal conductivity of the nanoparticles plays a key role for quick heat dissipation, and this justifies the use of the copper nanoparticles in different situations as a coolant. CONCLUSIONS: Velocity graph near the right wall of the channel decreases when we add nanoparticles into our base fluid, whereas an opposite behavior is depicted near the left wall due to ciliated tips. Pressure gradient increases for increasing values of Gr (Grashof number), L (velocity slip parameter) ϕ (nanoparticle volume fraction) and k (curvature parameter). Pressure rise shows increasing behavior for the increasing values of ε, Gr and ϕ throughout the region. Shear stress graphs show the increasing behavior for increasing values of curvature parameter and volume fraction of the nanoparticle. Temperature profile decreases when we add nanoparticles into our base fluid. Temperature profile also increases with an increase in thermal slip parameter γ and heat absorption parameter. It is observed that the number of trapped bolus increases when we increase the value of the cilia length parameter.

Endoscopy of gastropods: A novel view of the mantle cavities and gills of the keyhole limpet Diodora aspera and the abalone Haliotis rufescens.

The gills, or ctenidia, of marine gastropods serve as the sites for respiratory gas exchange. Cilia on the surface provide the pump that moves water through the mantle cavity and enhance diffusion. Because the gills are housed inside the shell, it is difficult to view them while they are functioning. Published images of gills show contracted, fragile structures that are distorted by the processes of dissection and preservation. Members of the families Fissurellidae (keyhole limpets) and Haliotidae (abalone) have openings in their shells through which water enters and/or exits. I inserted an endoscope connected to a video camera into the openings of the shells of living, non-anaesthetized individuals of the fissurellid Diodora aspera and the haliotid Haliotis rufescens. In both species, the dorsal afferent branchial vessel of the afferent gill axis appeared large and inflated, as did the leaflets that extended from either side of the axis. In D. aspera, the leaflets appeared to fill the mantle cavity and responded to touch, particles, and dye in the water by contracting quickly and slowly re-extending. In contrast, the gills of H. rufescens did not noticeably respond to disturbance. On the other hand, these gills showed a regular pattern of pleats that had not been described in the extensive anatomical literature of these common and economically significant animals. These results provide a novel view of the gastropod mantle cavity as a dynamic space filled by the gills, which divide the mantle cavity into distinct incurrent and excurrent chambers and produce a laminar flow of water through the cavity.