Controllable Silver Release for Efficient Treatment of Drug-Resistant Bacterial-Infected Wounds.

The use of traditional Ag-based antibacterial agents is usually accompanied by uncontrollable silver release, which makes it difficult to find a balance between antibacterial performance and biosafety. Herein, we prepared a core-shell system of ZIF-8-derived amorphous carbon-coated Ag nanoparticles (Ag@C) as an ideal research model to reveal the synergistic effect and structure-activity relationship of the structural transformation of carbon shell and Ag core on the regulation of silver release behavior. It is found that Ag@C prepared at 600 °C (AC6) exhibits the best ion release kinetics due to the combination of relatively simple shell structure and lower crystallinity of the Ag core, thereby exerting stronger antibacterial properties (>99.999 %) at trace doses (20 µg mL-1) compared with most other Ag-based materials. Meanwhile, the carbon shell prevents the metal Ag from being directly exposed to the organism and thus endows AC6 with excellent biocompatibility. In animal experiments, AC6 can effectively promote wound healing by inactivating drug-resistant bacteria while regulating the expression of TNF-α and CD31. This work provides theoretical support for the scientific design and clinical application of controllable ion-releasing antibacterial agents.

Environmental factors modify silver nanoparticles ecotoxicity in Chydorus eurynotus (Cladocera).

Silver nanoparticles (AgNPs) are among the most produced nanomaterials in the world and are incorporated into several products due to their biocide and physicochemical properties. Since freshwater bodies are AgNPs main final sink, several consequences for biota are expected to occur. With the hypothesis that AgNPs can interact with environmental factors, we analyzed their ecotoxicity in combination with humic acids and algae. In addition to the specific AgNPs behavior in the media, we analyzed the mortality, growth, and phototactic behavior of Chydorus eurynotus (Cladocera) as response variables. While algae promoted Ag+ release, humic acids reduced it by adsorption, and their combination resulted in an intermediated Ag+ release. AgNPs affected C. eurynotus survival and growth, but algae and humic acids reduced AgNPs lethality, especially when combined. The humic acids mitigated AgNP effects in C. eurynotus growth, and both factors improved its phototactic behavior. It is essential to deepen the study of the isolated and combined influences of environmental factors on the ecotoxicity of nanoparticles to achieve accurate predictions under realistic exposure scenarios.

Evaluation of setting kinetics, mechanical strength, ion release, and cytotoxicity of high-strength glass ionomer cement contained elastomeric micelles.

BACKGROUND: Low mechanical properties are the main limitation of glass ionomer cements (GICs). The incorporation of elastomeric micelles is expected to enhance the strength of GICs without detrimentally affecting their physical properties and biocompatibility. This study compared the chemical and mechanical properties, as well as the cytotoxicity, of elastomeric micelles-containing glass ionomer cement (DeltaFil, DT) with commonly used materials, including EQUIA Forte Fil (EF), Fuji IX GP Extra (F9), and Ketac Molar (KT). METHOD: Powder particles of GICs were examined with SEM-EDX. Setting kinetics were assessed using ATR-FTIR. Biaxial flexural strength/modulus and Vickers surface microhardness were measured after immersion in water for 24 h and 4 weeks. The release of F, Al, Sr, and P in water over 8 weeks was analyzed using a fluoride-specific electrode and ICP-OES. The toxicity of the material extract on mouse fibroblasts was also evaluated. RESULTS: High fluoride levels in the powder were detected with EF and F9. DT demonstrated an initial delay followed by a faster acid reaction compared to other cements, suggesting an improved snap set. DT also exhibited superior flexural strength than other materials at both 24 h and 4 weeks but lower surface microhardness (p < 0.05). EF and F9 showed higher release of F, Al, and P than DT and KT. There was no statistically significant difference in fibroblast viability among the tested materials (p > 0.05). CONCLUSIONS: Elastomeric micelles-containing glass ionomer cement (DT) exhibited satisfactory mechanical properties and cytocompatibility compared with other materials. DT could, therefore, potentially be considered an alternative high-strength GIC for load-bearing restorations.

Comparative biological properties of resin-free and resin-based calcium silicate-based endodontic repair materials on human periodontal ligament stem cells.

OBJECTIVES: To investigate the effect of three different calcium silicate-based materials (CSBM) on the biological behavior of human periodontal ligament stem cells (hPDLSCs). METHODS: Eluates of Biodentine, NeoPutty and TheraCal PT prepared at 1:1, 1:2, and 1:4 ratios were extracted under sterile conditions. The cytotoxicity of the extracts to the hPDLSCs was assessed using the MTT assay. Scratch wound healing assay was utilized for assessing cell migration. Scanning electron microscopy was used to detect cell attachment and morphology. Calcium ion release was measured using inductively coupled plasma-optical emission spectrometry; the pH-value was evaluated with a pH-meter. ANOVA with post hoc Tukey test was used for statistical analysis. RESULTS: Cell viability was significantly higher for Biodentine and NeoPutty at day 1 with all dilutions (p < 0.05), while at day 3 and day 7 with dilutions 1:2 and 1:4; all materials showed similar behavior (p > 0.05). Biodentine had the highest percentage of cell migration into the scratched area at day 1 for all dilutions (p < 0.05). Stem cells were attached favorably on Biodentine and NeoPutty with evident spreading, and intercellular communications; however, this was not shown for TheraCal PT. Biodentine showed the highest pH values and calcium ion release (p < 0.05). CONCLUSIONS: The resin-free CSBM showed better performance and favorable biological effects on hPDLSCs and were therefore considered promising for usage as endodontic repair materials. CLINICAL SIGNIFICANCE: Proper selection of materials with favorable impact on the host stem cells is crucial to ensure outcome in different clinical scenarios.

Nickel ion release and surface analyses on instrument fragments fractured beyond the apex: a laboratory investigation.

BACKGROUND: To analyse the changes in surface and nickel ion release characteristics of fractured root canal shaping instruments in a simulated body fluid environment. METHODS: A total of 54 new instruments were studied. The instrument groups consisted of five different NiTi alloys and a stainless-steel alloy. To standardize instrument fracture, a torsional type of failure was created on each instrument. The fractured specimens of each instrument group were randomly divided into three static immersion subgroups of 1 h, 7-day, and 30-day (n = 3). Simulated body fluid (SBF) was prepared to mimic human blood plasma by Kokubo&Takadama protocol for ex situ static immersions at 37ºC. The surfaces were examined via scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy. To determine the quantitative ion release, the retrieved SBFs were analyzed using inductively coupled plasma mass spectrometry. Two-way ANOVA and Tukey post hoc tests sought the statistical significance of the nickel ion values(p < 0.05). RESULTS: In 1 h of immersion, the newly formed structures, exhibiting mostly oxygen signals, were widespread and evident on NiTi surfaces. In contrast, fewer structures were detected on the SS surface in that subgroup. In 7 days of immersion, a tendency for a decrease in the density of the new structures was revealed in NiTi groups. The oxygen signals on NiTi group surfaces significantly increased, contrary to their decrease in SS. Signals of sodium, chlorine, and calcium were detected, indicating salt precipitates in groups. In 30 days of immersion, salt precipitates continued to form. The Ni-ion release values in all instrument groups presented significant differences in comparison to the SBF control in all immersion periods(p < 0.001). No significant differences were observed in immersion time periods or instrument groups(p > 0.05). CONCLUSIONS: Within the limitations of the presented study, it was concluded that the fractured SS and NiTi root canal instruments release Ni ions in contact with body fluid. However, the Ni ion release values determined during the observation periods are lower than the critical toxic or allergic thresholds defined for the human body. This was due to the ionic dissolution cycle reaching a stable state from 1-hour to 30-day exposure to the body fluid of fractured instruments.

Gallic acid-coated silver nanoparticles as perspective drug nanocarriers: bioanalytical study.

The ability of silver nanoparticles (AgNPs) to be used as drug nanocarriers has helped rapidly to invent novel strategies to treat diseases, such as cancer. The nanoparticles may offer a valuable tool to novel pH-sensitive drug delivery systems in the present scenario because of their undergoing mechanisms associated with the regulated dissolution, aggregation, and generation of oxygen radicals as well. These processes could be monitored by electrochemical (bio)sensors that are less money and time-consuming compared to other analytical approaches, however, with comparable analytical performance. In this paper, synthesized and microscopically characterized gallic acid-coated AgNPs (GA-AgNPs) are investigated using spectral and electrochemical methods. To investigate the Ag+ release, a 21-day ageing experiment is performed spectrophotometrically, finding that the peak maximum of GA-AgNPs spectra diminished by 24.5%. The highest Ag+ content was electrochemically determined in the supernatant solution after centrifugation (6.97 µmol·L-1), while no significant concentration of silver ions in solution after redispersion was observed (1.26 µmol·L-1). The interaction experiment indicates a stabilization of GA-AgNPs in the presence of long-chain dsDNA as well as a mutual electrostatic interaction with DNA sugar-phosphate backbone. This interaction mechanism is confirmed by FTIR analysis, showing a shift (1049 to 1061 cm-1 and 913 to 964 cm-1) specific to DNA phosphate bands. Finally, doxorubicin-loaded GA-AgNPs are monitored for the specific drug release in the physiological and more reactive weakly acidic microenvironment. Hereby, electrochemical (bio)sensing of GA-AgNPs undergoing mechanisms shows a huge potential to be used for monitoring of drug delivery systems at cancer therapy.

Comparison of calcium and hydroxyl ion release ability and in vivo apatite-forming ability of three bioceramic-containing root canal sealers.

OBJECTIVE: Bioceramic-containing root canal sealers promote periapical healing via Ca2+ and OH- release and apatite formation on the surface. This study aimed to compare Ca2+ and OH- release and in vivo apatite formation of three bioceramic-containing root canal sealers: EndoSequence BC sealer (Endo-BC), MTA Fillapex (MTA-F), and Nishika Canal Sealer BG (N-BG). MATERIALS AND METHODS: Polytetrafluoroethylene tubes filled with sealers were immersed in distilled water for 6 and 12 h and for 1, 7, 14, and 28 days to measure Ca2+ and OH- release. Additionally, tubes filled with sealers were implanted in the backs of rats for 28 days, and in vivo apatite formation was analyzed using an electron probe microanalyzer. RESULTS: Endo-BC released significantly more Ca2+ than the other sealers at 6 and 12 h and 1 day. Ca2+ release was significantly lower from N-BG than from Endo-BC and MTA-F at 14 and 28 days. OH- release was significantly higher from Endo-BC than from the other sealers throughout the experiment, except at 1 day. OH- release was lower from N-BG than from MTA-F at 6 h and 7 days. Only Endo-BC implants exhibited apatite-like calcium-, phosphorus-, oxygen-, and carbon-rich spherulites and apatite layer-like calcium- and phosphorus-rich, but radiopaque element-free, surface regions. CONCLUSIONS: Ca2+ and OH- release is ranked as follows: Endo-BC > MTA-F > N-BG. Only Endo-BC demonstrated in vivo apatite formation. CLINICAL RELEVANCE: Endo-BC could promote faster periapical healing than MTA-F and N-BG.

Comparative chemical properties, bioactivity, and cytotoxicity of resin-modified calcium silicate-based pulp capping materials on human dental pulp stem cells.

OBJECTIVES: This study investigated the cytotoxicity, the residual monomer release, degree of conversion (DC), calcium ion (Ca2+) release, and crystal structure of TheraCal PT (ThPT) by comparison with TheraCal LC (ThLC) and mineral trioxide aggregate (MTA). MATERIALS AND METHODS: The cytotoxicity of the cured materials was evaluated on human dental pulp stem cells (hDPSCs) isolated from third molars by the water-soluble tetrazolium salt (WST-1) method. The monomer release and DC of the resin-containing materials were analyzed by high-performance liquid chromatography (HPLC) and Fourier transform infrared (FTIR), respectively. The chemical composition and Ca2+ release of the materials were determined by scanning electronic microscopy-energy-dispersive spectroscopy (SEM-EDS), X-ray diffractometry (XRD), and inductively coupled plasma-optical emission spectroscopy (ICP-OES), respectively. Statistical differences were evaluated with one-way ANOVA, repeated measure ANOVA, and the Tukey test (p < 0.05). RESULTS: MTA showed significantly lower cytotoxicity than either ThLC or ThPT after 1, 3, and 7 days (p < 0.05). TEGDMA release of ThPT is significantly higher than ThLC (p < 0.05). All materials showed calcium Ca2+ release, with MTA significantly higher than the others (p < 0.05). CONCLUSIONS: MTA showed low cytotoxicity and high Ca2+ release compared to ThLC and ThPT. CLINICAL RELEVANCE: The cytotoxicity and residual monomer release of ThLC and ThPT may raise concerns about the viability of hDPSCs. Further investigations with the use of in vivo research models are required to validate in vitro bioactivity properties and the potential adverse biological effects of ThLC and ThPT on hDPSCs.

Do Modular Dual Mobility Cups Offer a Reliable Benefit? Minimum 5-Year Follow-Up of 102 Cups.

BACKGROUND: Among various options suggested to prevent hip instability after total hip replacement, the MDM-tritanium (modular dual mobility) cup features a cobalt-chrome liner (CoCr) positioned in a titanium acetabular shell and matched with a mobile insert in highly cross-linked annealed X3 polyethylene. The purpose of this study aimed to confirm whether there was no significant release of ions (Co and Cr) or higher occurrence of dislocation or even cases of aseptic loosening of the cementless shell with the use of MDM-tritanium cups at minimum of 5-year follow-up. METHODS: The clinical study was carried out on a homogeneous consecutive and nonselective series with 102 MDM cups (98 patients) implanted in 2 centers. This MDM-tritanium cup had been systematically used for surgical revisions (70% of cases) or for patients with major hip dysplasia or in elderly patients with poor bone quality. A biological assessment of ion releases has been performed in a specific cohort of 39 cases that had an internal ceramic head. RESULTS: None of the following complications was observed: no case of immunoallergic event, no aseptic loosening, and the dislocation rate was 4.9% involving only the difficult primary and revision cases. The clinical results were encouraging, with 89.7 points for Harris Hip Score, 41.16 points/48 for the OHS-12. The Agora Roentgenographic Assessment (ARA) radiologic score was graded "excellent" in 94.4%. The MDM-tritanium survivorship with revision for any cause in 102 cups at 7.95 years was 92.7%. CONCLUSION: Based on the results of our first 102 cases, there were no immunoallergic complications-contrary to what was initially feared with the CoCr bearing-titanium pair-and no postoperative instability, including for complex primary and revisions total hip replacements. LEVEL OF EVIDENCE: Individual Cohort Study: 2B.

The impact of an alkasite restorative material on the pH of Streptococcus mutans biofilm and dentin remineralization: an in vitro study.

BACKGROUND: It has been claimed that an alkasite restorative material can neutralize acids produced by cariogenic bacteria from released hydrogen ions and enable to remineralization via calcium and fluoride ions. However, there is no evidence to support this assertion. Therefore, the aims of this study were to investigate the effect of the alkasite restorative material on the pH of Streptococcus mutans biofilm and dentin hardness. METHODS: Streptococcus mutans biofilms were formed on Filtek™ Z350 (FZ, a resin composite) and Cention® N (CN, the alkasite restorative material) and their pH determined after 24 h. Hydroxide, fluoride, and calcium-ions released from the materials were determined at 6 h, 1, 3, 7, 14, and 28 days. Dentin specimens were prepared from 14 human molars and divided into four quadrants. Quadrant 1 was a sound dentin control, quadrants 2-4 were chemically demineralized, and a cylinder of FZ and CN placed on the surfaces of quadrants 2 and 4, respectively. The microhardness of quadrants 1 and 3 were measured at depths of 20, 40, and 60 µm from the occlusal surface, and similarly of quadrants 2 and 4, after 30 days. Independent t-test, Mann-Whitney-U, and repeated-measure-ANOVA were used for data analysis. RESULTS: The pH of biofilm on CN (4.45) was significantly higher (p < 0.05) than that on FZ (4.06). The quantity of all ions released from CN was significantly higher than from FZ. The hardness of demineralized dentin under CN was significantly higher than that of demineralized dentin at all depths, and higher than that of demineralized dentin under FZ at 20 and 40 µm. CONCLUSIONS: CN released hydroxide, fluoride, and calcium ions, which was associated with raising the biofilm pH and the hardness of demineralized dentin. All results indicated that CN had the potential to reduce the incidence of secondary caries.

Evaluation of the pH, calcium ion release, and antibacterial effect of a premixed bioceramic endodontic sealer.

This study sought to compare a bioceramic sealer (TotalFill) and a calcium hydroxide (Ca[OH]2) sealer (Sealapex) in terms of their pH, calcium ion (Ca²âº) release, and antibacterial effect against Enterococcus faecalis bacteria. For the pH and Ca²âº release tests, 20 polyethylene tubes (10 mm in height and 1 mm in internal diameter) were filled with the appropriate sealer (n = 10 per sealer), immersed in glass flasks each containing 10 mL of deionized water, and stored in an incubator at 37°C. The water was changed after 1, 7, 28, and 90 days. At each water change, the eluates were measured with an advanced electrochemistry meter to determine the pH and with a flame atomic absorption spectrometer to determine the Ca²âº release. The antibacterial effect was measured using the turbidimetry-based direct contact test in which the wells of a microtiter plate were coated with a thin, even layer of freshly prepared sealer (10 wells per sealer), which was allowed to set before application of a suspension of E faecalis. Control wells were obtained by placing an identical bacterial suspension in 10 uncoated wells. The optical density of the sealer and control groups was measured immediately and 1, 3, and 7 days after sealer preparation. Data were analyzed for normality with the Shapiro-Wilk and Kolmogorov-Smirnov tests. Two-way analysis of variance (ANOVA), Student t test, and 1-way ANOVA with Tukey post hoc tests were all utilized with a significance level of P < 0.05. TotalFill maintained significantly higher pH and Ca²âº release levels than Sealapex at all evaluation times (P < 0.05). Both sealers demonstrated significantly greater antibacterial effect (lower optical density) than the control group; however, TotalFill resulted in significantly lower optical density values than Sealapex (P < 0.05). TotalFill bioceramic sealer demonstrated superior Ca(OH)2-related properties compared to Sealapex Ca(OH)2 sealer.

Comparative evaluation of a bioactive restorative material with resin modified glass ionomer for calcium-ion release and shear bond strength to dentin of primary teeth-an in vitro study.

OBJECTIVES: This study aimed to evaluate the release of calcium ions from a bioactive restorative material and its shear bond strength (SBS) to primary dentin. STUDY DESIGN: Occlusal surface of extracted non-carious primary molars were flattened, onto which 2 × 2 mm cylinders of ACTIVA™ BioActive Restorative (PULPDENT® Corporation, Watertown MA) or Fuji II LC (GC Corporation, Tokyo, Japan) were prepared using a polypropylene straw mould. SBS of the materials to primary dentin was tested using a universal testing machine. The mode of bond failure was assessed using stereomicroscopy. 10 mm × 2 mm disks of each material were prepared and immersed in Milli-Q water for 1, 7, 14 and 21 days. The released calcium ions in the immersion media were quantified using Atomic Absorption Spectroscopy. RESULTS: ACTIVA™ BioActive Restorative showed a mean SBS of 4.29 ± 0.65 MPa to primary dentin and calcium ion release of 0.76 ± 0.12 ppm over 21 days. CONCLUSION: ACTIVA™ BioActive Restorative showed a significantly higher mean SBS to primary dentin, and significantly higher calcium ion release compared to Fuji II LC.

Microstructural composition, ion release, and bioactive potential of new premixed calcium silicate-based endodontic sealers indicated for warm vertical compaction technique.

OBJECTIVE: The aim of this study was to evaluate the microstructural composition, ion release, cytocompatibility, and mineralization potential of Bio-C Sealer ION+ (BCI) and EndoSequence BC Sealer HiFlow (BCHiF), compared with AH Plus (AHP), in contact with human periodontal ligament cells (hPDLCs). MATERIALS AND METHODS: The sealers' ionic composition and release were assessed using energy-dispersive spectroscopy (EDS) and inductively coupled plasma mass spectrometry (ICP-MS), respectively. For the biological assays, hPDLCs were isolated from third molars, and sealer extracts were prepared (undiluted, 1:2, and 1:4 ratios). An MTT assay, wound-healing assay, and cell morphology and adhesion analysis were performed. Activity-related gene expression was determined using RT-qPCR, and mineralization potential was assessed using Alizarin Red staining (ARS). Statistical analyses were performed using one-way ANOVA and Tukey's post hoc test (α < 0.05). RESULTS: The three sealers exhibited variable levels of silicon, calcium, zirconium, and tungsten release and in their composition. Both BCI and BCHiF groups showed positive results in cytocompatibility assays, unlike AHP. The BCHiF group showed an upregulation of CAP (p < 0.01), CEMP1, ALP, and RUNX2 (p < 0.001) compared with the negative control, while the BCI group showed an upregulation of CEMP1 (p < 0.01), CAP, and RUNX2 (p < 0.001). Both groups also exhibited a greater mineralization potential than the negative and positive controls (p < 0.001). CONCLUSIONS: The calcium silicate-based sealers considered in the present in vitro study exhibited a high calcium ion release, adequate cytocompatibility, upregulated osteo/cementogenic gene expression, and increased mineralized nodule formation in contact with hPDLCs. CLINICAL RELEVANCE: From a biological perspective, BCI and BCHiF could be clinically suitable for root canal filling.

Key Properties of a Bioactive Ag-SiO2/TiO2 Coating on NiTi Shape Memory Alloy as Necessary at the Development of a New Class of Biomedical Materials.

Recent years have seen the dynamic development of methods for functionalizing the surface of implants using biomaterials that can mimic the physical and mechanical nature of native tissue, prevent the formation of bacterial biofilm, promote osteoconduction, and have the ability to sustain cell proliferation. One of the concepts for achieving this goal, which is presented in this work, is to functionalize the surface of NiTi shape memory alloy by an atypical glass-like nanocomposite that consists of SiO2-TiO2 with silver nanoparticles. However, determining the potential medical uses of bio(nano)coating prepared in this way requires an analysis of its surface roughness, tribology, or wettability, especially in the context of the commonly used reference coat-forming hydroxyapatite (HAp). According to our results, the surface roughness ranged between (112 ± 3) nm (Ag-SiO2)-(141 ± 5) nm (HAp), the water contact angle was in the range (74.8 ± 1.6)° (Ag-SiO2)-(70.6 ± 1.2)° (HAp), while the surface free energy was in the range of 45.4 mJ/m2 (Ag-SiO2)-46.8 mJ/m2 (HAp). The adhesive force and friction coefficient were determined to be 1.04 (Ag-SiO2)-1.14 (HAp) and 0.247 ± 0.012 (Ag-SiO2) and 0.397 ± 0.034 (HAp), respectively. The chemical data showed that the release of the metal, mainly Ni from the covered NiTi substrate or Ag from Ag-SiO2 coating had a negligible effect. It was revealed that the NiTi alloy that was coated with Ag-SiO2 did not favor the formation of E. coli or S. aureus biofilm compared to the HAp-coated alloy. Moreover, both approaches to surface functionalization indicated good viability of the normal human dermal fibroblast and osteoblast cells and confirmed the high osteoconductive features of the biomaterial. The similarities of both types of coat-forming materials indicate an excellent potential of the silver-silica composite as a new material for the functionalization of the surface of a biomaterial and the development of a new type of functionalized implants.

Biological and Corrosion Evaluation of In Situ Alloyed NiTi Fabricated through Laser Powder Bed Fusion (LPBF).

In this work, NiTi alloy parts were fabricated using laser powder bed fusion (LBPF) from pre-alloyed NiTi powder and in situ alloyed pure Ni and Ti powders. Comparative research on the corrosive and biological properties of both studied materials was performed. Electrochemical corrosion tests were carried out in phosphate buffered saline at 37 °C, and the degradation rate of the materials was described based on Ni ion release measurements. Cytotoxicity, bacterial growth, and adhesion to the surface of the fabricated coupons were evaluated using L929 cells and spherical Escherichia coli (E. coli) bacteria, respectively. The in situ alloyed NiTi parts exhibit slightly lower corrosion resistance in phosphate buffered saline solution than pre-alloyed NiTi. Moreover, the passive layer formed on in situ alloyed NiTi is weaker than the one formed on the NiTi fabricated from pre-alloyed NiTi powder. Furthermore, in situ alloyed NiTi and NiTi made from pre-alloyed powders have comparable cytotoxicity and biological properties. Overall, the research has shown that nitinol sintered using in situ alloyed pure Ni and Ti is potentially useful for biomedical applications.

Cytotoxic Evaluation and Determination of Organic and Inorganic Eluates from Restorative Materials.

Over the last years, diverse commercial resin-based composites have dominated as dental filling materials. The purpose of the present study was to determine organic and inorganic eluates from five restorative materials using GC/MS and ICP-OES and to compare the effect on cell survival of human gingival fibroblasts of a conventional and a bioactive resin. Five commercially available restorative materials were employed for this study: ActivaTM Bioactive Restorative, ENA HRi, Enamel plus HRi Biofunction, Fuji II LC Capsule, and Fuji IX Capsule. Disks that were polymerized with a curing LED light or left to set were immersed in: 1 mL methanol or artificial saliva for GC/MS analysis, 5mL deionized water for ICP-OES, and 5mL of culture medium for cell viability. Cell viability was investigated with a modified staining sulforhodamine B assay.The following organic substances were detected: ACP, BHT, BPA, 1,4-BDDMA, CQ, DBP, DMABEE, HEMA, MCE, MeHQ, MOPA, MS, TMPTMA, and TPSb and the ions silicon, aluminum, calcium, sodium, and barium. Activa Bioactive Restorative was found to be biocompatible. Elution of organic substances depended on material's composition, the nature of the solvent and the storage time. Ions' release depended on material's composition and storage time. The newly introduced bioactive restorative was found to be more biocompatible.

Comparison of Corrosion Products From Implant and Various Gold-Based Abutment Couplings: The Effect of Gold Plating.

This study compared titanium (Ti), palladium (Pd), platinum (Pt), and gold (Au) ion release following induced accelerated tribocorrosion from three Au alloy abutment groups coupled with Ti implants over time; investigated contacting surface structural changes; and explored the effect of Au plating. Three abutment groups, G (n = 8, GoldAdapt, Nobel Biocare), N (n = 8, cast UCLA, Biomet3i), and P (n = 8, cast UCLA, Biomet3i, Au plated), coupled with implants (Nobel Biocare), immersed in 1% lactic acid, were cyclically loaded. Ions released (ppb) at T1, T2, and T3, simulating 3, 5, and 12 months of function, respectively, were quantified by inductively coupled plasma mass spectrometry (ICP-MS) and compared. Surface degradation and fretted particle composition after T3 were evaluated with scanning electron microscopy and energy-dispersive X-ray spectroscopy (SEM/EDX). ICP-MS data were nonparametric, expressed as medians and interquartile ranges. SEM/EDX showed pitting, crevice corrosion, and fretted particles on the components. Released ion concentrations in all groups across time significantly decreased for Pd (P < .001, median range: 1.70-0.09), Pt (P = .021, 0.55-0.00), and Au (P < .001, 1.01-0.00) and increased for Ti (P = .018, 2.49-5.84). Total Ti release was greater than other ions combined for G (P = .012, 9.86-2.30) and N (P < .001, 13.59-5.70) but not for P (P = .141, 8.21-3.53). Total Ti release did not differ between groups (P = .36) but was less variable across group P. On average, total ion release was 13.77 ppb (interquartile range 8.91-26.03 ppb) across the 12-month simulation. Tribocorrosion of Ti implants coupled with Au abutments in a simulated environment was evidenced by fretted particles, pitting, and crevice corrosion of the coupling surfaces and release of ions. More Ti was released compared with Pd, Pt, and Au and continued to increase with time. Abutment composition influenced ion release. Au-plated abutments appeared to subdue variation in and minimize high-concentration spikes of titanium.

Metal ions leachables from fake orthodontic braces incubated in simulated body fluid.

BACKGROUND: The demand for fake braces usage in Southeast Asia are increasing but lack of certification and information on fake braces as medical devices from regulated bodies raised a concern towards its safety. The aim of this study was to determine the types of metal ion leachable from removable fake braces based on heavy metal ions present in metallic materials, immersed in simulated body fluid (SBF) and analysed using inductively coupled plasma atomic emission spectroscopy. METHODS: Three sets of fake braces and one control were dissembled to only their brackets and archwires and immersed separately in SBF. They were placed in an incubator shaker at a temperature of 37 °C at 50 rpm. A 3.0 ml measurement of SBF was taken out from the sample containers at days 7, 14 and 28 and kept at - 20 °C for further analysis. Data were analysed using SPSS version 26.0 (IBM, Armonk, USA) (P < 0.05). Descriptive and one-way ANOVA analyses with Bonferroni post hoc tests were used to assess the significant differences between the metal ions released in SBF from the control samples and fake braces. RESULTS: All 23 elements under investigation except Si ions were detected from the control samples and fake braces. There were significant increased K ions and reduced levels of Mg ions from the fake archwires and brackets. Most ions released were less than 10 mg/L (Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Mo, Cd, Pb, Al) or 1 mg/L (Li, Ba) into the SBF medium. CONCLUSION: There were significant release of Ca and K ions from the fake samples. Elements such as Li, Ba, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Mo, Cd and Sb had increased in concentration at day 7 and the concentration plateaued until day 28.

NIR-Triggered Intracellular H+ Transients for Lamellipodia-Collapsed Antimetastasis and Enhanced Chemodynamic Therapy.

In solid tumors, tumor invasion and metastasis account for 90 % of cancer-related deaths. Cell migration is steered by the lamellipodia formed at the leading edge. These lamellipodia can drive the cell body forward by its mechanical deformation regulated by cofilin. Inhibiting cofilin activity can cause significant defects in directional lamellipodia formation and the locomotory capacity of cell invasion, thus contributing to antimetastatic treatment. Herein, a near infrared light (NIR)-controlled nanoscale proton supplier was designed with upconversion nanoparticles (UCNPs) as a core coated in MIL-88B for interior photoacids loading; this photoacids loading can boost H+ transients in cells, which converts the cofilin to an inactive form. Strikingly, inactive cofilin loses the ability to mediate lamellipodia deformation for cell migration. Additionally, the iron, which serves as a catalyticaly active center in MIL-88B, initiates an enhanced Fenton reaction due to the increased H+ in the tumor, ultimately achieving intensive chemodynamic therapy (CDT). This work provides new insight into H+ transients in cells, which not only regulates cofilin protonation for antimetastatic treatment but also improves chemodynamic therapy.

Antibacterial rGO-CuO-Ag film with contact- and release-based inactivation properties.

To reduce the high operational costs of water treatment because of membrane biofouling, next-generation materials are being developed to counteract microbial growth. These modern anti-biofouling strategies are based on new membrane materials or membrane surface modifications. In this study, antimicrobial films comprising rGO, rGO-CuO, rGO-Ag, and rGO-CuO-Ag were synthesized, evaluated, and tested for potential biofouling control using Pseudomonas aeruginosa PAO1 as the model bacterium. The combined rGO-CuO-Ag film displayed enhanced reduction (10-log reduction) in biofouling in comparison to the rGO film (control), followed by the rGO-Ag film (8-log reduction) and rGO-CuO film (0-log reduction). This demonstrated that the use of mixed antimicrobial agents is more effective in reducing biofouling than that of a single agent. The rGO-CuO-Ag film exhibited consistent, controlled, and moderate release of silver (Ag) ions. The release of Ag ions produced a long-lasting antimicrobial effect. These results underscore the potential applications of combined antimicrobial surface-based agents in practice and further research.