Enhancement of second-harmonic generation in a 64° stacked WSe2/WS2heterobilayer with local strain.

Transition metal dichalcogenides (TMDs) are actively studied in various fields of optics and optoelectronics, including nonlinear optics of second-harmonic generation (SHG). By stacking two different TMD materials to form a heterobilyaer, unique optical properties emerge, with stronger SHG at a twist angle of 0° between TMDs and weaker SHG at a twist angle of 60°. In this work, we demonstrate the enhancement of SHG in a heterobilayer consisting of WSe2and WS2monolayers stacked at a twist angle of 64.1°, using a nanoparticle to induce local strain. The interatomic spacing of the heterobilayer is deformed by the nanoparticle, breaking the inversion symmetry, resulting in a substantial increase in the SHG of the heterobilayer at room temperature. The SHG increases depending on the polarization of the pump laser: 15-fold for linear polarization, 9-fold for right-circular polarization, and up to 100-fold for left-circular polarization. In addition, the SHG enhanced in the heterobilayer with local strain satisfies the same chiral selection rule as in the unstrained TMD region, demonstrating that the chiral selection rule of SHG is insensitive to local strain. Our findings will increase the applicability of TMD heterobilayers in nonlinear optoelectronics and valleytronics.

Positive- and Negative-Pressure Ventilation Characterized by Local and Global Pulmonary Mechanics.

Rationale: There is continued debate regarding the equivalency of positive-pressure ventilation (PPV) and negative-pressure ventilation (NPV). Resolving this question is important because of the different practical ramifications of the two paradigms. Objectives: We sought to investigate the parallel between PPV and NPV and determine whether or not these two paradigms cause identical ventilation profiles by analyzing the local strain mechanics when the global tidal volume (Vt) and inflation pressure was matched. Methods: A custom-designed electromechanical apparatus was used to impose equal global loads and displacements on the same ex vivo healthy porcine lung using PPV and NPV. High-speed high-resolution cameras recorded local lung surface deformations and strains in real time, and differences between PPV and NPV global energetics, viscoelasticity, as well as local tissue distortion were assessed. Measurements and Main Results: During initial inflation, NPV exhibited significantly more bulk pressure-volume compliance than PPV, suggestive of earlier lung recruitment. NPV settings also showed reduced relaxation, hysteresis, and energy loss compared with PPV. Local strain trends were also decreased in NPV, with reduced tissue distortion trends compared with PPV, as revealed through analysis of tissue anisotropy. Conclusions: Apparently, contradictory previous studies are not mutually exclusive. Equivalent changes in transpulmonary pressures in PPV and NPV lead to the same changes in lung volume and pressures, yet local tissue strains differ between PPV and NPV. Although limited to healthy specimens and ex vivo experiments in the absence of a chest cavity, these results may explain previous reports of better oxygenation and less lung injury in NPV.

A Feasible Surface Patterning Method for SEM-DIC: Achieving High-Resolution In Situ Mapping of Local Strain and Microstructure to Reveal the Effect of Slip Transfer on Shear Strain Near Grain Boundaries.

This paper exploited an alternative approach to prepare high-quality speckle patterns by uniformly dispersing nano-silica particles onto sample surfaces, helping digital image correlation (DIC) acquire the maximum spatial resolution of local strain up to 92 nm. A case study was carried out by combining this speckle pattern fabrication method with SEM-DIC and electron backscattering diffraction (EBSD). Thus, in situ mapping of local strain with ultra-high spatial resolution and microstructure in commercially pure titanium during plastic deformation could be achieved, which favored revealing the effect of slip transfer on shear strain near grain boundaries. Moreover, the slip systems could be easily identified via the combination of the SEM-DIC and EBSD techniques even though no obvious deformation trace was captured in secondary electron images. Additionally, the complex geometric compatibility factor $( {m}^{\prime}_c)$ relating to geometric compatibility factors (mʹ) and Schmid factors was proposed to predict the shear strain (εxy) at grain boundaries.

Dynamic Exciton Funneling by Local Strain Control in a Monolayer Semiconductor.

The ability to control excitons in semiconductors underlies numerous proposed applications, from excitonic circuits to energy transport. Two dimensional (2D) semiconductors are particularly promising for room-temperature applications due to their large exciton binding energy and enormous stretchability. Although the strain-induced static exciton flux has been observed in predetermined structures, dynamic control of exciton flux represents an outstanding challenge. Here, we introduce a method to tune the bandgap of suspended 2D semiconductors by applying a local strain gradient with a nanoscale tip. This strain allows us to locally and reversibly shift the exciton energy and to steer the exciton flux over micrometer-scale distances. We anticipate that our result not only marks an important experimental tool but will also open a broad range of new applications from information processing to energy conversion.

Engineering Atomically Dispersed FeN4 Active Sites for CO2 Electroreduction.

Atomically dispersed FeN4 active sites have exhibited exceptional catalytic activity and selectivity for the electrochemical CO2 reduction reaction (CO2RR) to CO. However, the understanding behind the intrinsic and morphological factors contributing to the catalytic properties of FeN4 sites is still lacking. By using a Fe-N-C model catalyst derived from the ZIF-8, we deconvoluted three key morphological and structural elements of FeN4 sites, including particle sizes of catalysts, Fe content, and Fe-N bond structures. Their respective impacts on the CO2RR were comprehensively elucidated. Engineering the particle size and Fe doping is critical to control extrinsic morphological factors of FeN4 sites for optimal porosity, electrochemically active surface areas, and the graphitization of the carbon support. In contrast, the intrinsic activity of FeN4 sites was only tunable by varying thermal activation temperatures during the formation of FeN4 sites, which impacted the length of the Fe-N bonds and the local strains. The structural evolution of Fe-N bonds was examined at the atomic level. First-principles calculations further elucidated the origin of intrinsic activity improvement associated with the optimal local strain of the Fe-N bond.

Phonon Polariton-assisted Infrared Nanoimaging of Local Strain in Hexagonal Boron Nitride.

Strain plays an important role in condensed matter physics and materials science because it can strongly modify the mechanical, electrical, and optical properties of a material and even induce a structural phase transition. Strain effects are especially interesting in atomically thin two-dimensional (2D) materials, where unusually large strain can be achieved without breaking them. Measuring the strain distribution in 2D materials at the nanometer scale is therefore greatly important but is extremely challenging experimentally. Here, we use near-field infrared nanoscopy to demonstrate phonon polariton-assisted mapping and quantitative analysis of strain in atomically thin polar crystals of hexagonal boron nitride (hBN) at the nanoscale. A local strain as low as 0.01% can be detected using this method with ∼20 nm spatial resolution. Such ultrasensitive nanoscale strain imaging and analysis technique opens up opportunities for exploring unique local strain structures and strain-related physics in 2D materials. In addition, experimental evidence for local strain-induced phonon polariton reflection is also provided, which offers a new approach to manipulate light at deep subwavelength scales for nanophotonic devices.

LEMON: a method to construct the local strains at horizontal gene transfer sites in gut metagenomics.

BACKGROUND: Horizontal Gene Transfer (HGT) refers to the transfer of genetic materials between organisms through mechanisms other than parent-offspring inheritance. HGTs may affect human health through a large number of microorganisms, especially the gut microbiomes which the human body harbors. The transferred segments may lead to complicated local genome structural variations. Details of the local genome structure can elucidate the effects of the HGTs. RESULTS: In this work, we propose a graph-based method to reconstruct the local strains from the gut metagenomics data at the HGT sites. The method is implemented in a package named LEMON. The simulated results indicate that the method can identify transferred segments accurately on reference sequences of the microbiome. Simulation results illustrate that LEMON could recover local strains with complicated structure variation. Furthermore, the gene fusion points detected in real data near HGT breakpoints validate the accuracy of LEMON. Some strains reconstructed by LEMON have a replication time profile with lower standard error, which demonstrates HGT events recovered by LEMON is reliable. CONCLUSIONS: Through LEMON we could reconstruct the sequence structure of bacteria, which harbors HGT events. This helps us to study gene flow among different microbial species.

Adaptive Feedforward Compensating Self-Sensing Method for Active Flutter Suppression.

A single piezoelectric patch can be used as both a sensor and an actuator by means of the self-sensing piezoelectric actuator, and the function of self-sensing shows several advantages in many application fields. However, some problems exist in practical application. First, a capacitance bridge circuit is set up to realize the function of self-sensing, but the precise matching of the capacitance of the bridge circuit is hard to obtain due to the standardization of electric components and variations of environmental conditions. Second, a local strain is induced by the self-sensing actuator that is not related to the global vibration of the structure, which would affect the performance of applications, especially in active vibration control. The above problems can be tackled by the feedforward compensation method that is proposed in this paper. A configured piezoelectric self-sensing circuit is improved by a feedforward compensation tunnel, and a gain of compensation voltage is adjusted by the time domain and frequency domain's steepest descent algorithms to alleviate the capacitance mismatching and local strain problems. The effectiveness of the method is verified in the experiment of the active vibration control in a wind tunnel, and the control performance of compensated self-sensing actuation is compared to the performance with capacitance mismatching and local strain. It is found that the above problems have negative effects on the stability and performance of the vibration control and can be significantly eliminated by the proposed method.

Strong Modulation of Optical Properties in Black Phosphorus through Strain-Engineered Rippling.

Controlling the bandgap through local-strain engineering is an exciting avenue for tailoring optoelectronic materials. Two-dimensional crystals are particularly suited for this purpose because they can withstand unprecedented nonhomogeneous deformations before rupture; one can literally bend them and fold them up almost like a piece of paper. Here, we study multilayer black phosphorus sheets subjected to periodic stress to modulate their optoelectronic properties. We find a remarkable shift of the optical absorption band-edge of up to ∼0.7 eV between the regions under tensile and compressive stress, greatly exceeding the strain tunability reported for transition metal dichalcogenides. This observation is supported by theoretical models that also predict that this periodic stress modulation can yield to quantum confinement of carriers at low temperatures. The possibility of generating large strain-induced variations in the local density of charge carriers opens the door for a variety of applications including photovoltaics, quantum optics, and two-dimensional optoelectronic devices.

The effect of friction and impact angle on the spermatozoa-oocyte local contact dynamics.

Although a large proportion of biomolecules involved in spermatozoa-oocyte interaction has been discovered so far, many details of fertilization mechanism remain unknown. Both biochemical and biomechanical components exist in the fertilization process. Mammalian sperm evolved a ZP (zona pelucida) thrust reduction penetration strategy probably in response to the ZP resilient elasticity. Using a biomechanical approach and FEM analysis, local contact stress, ZP deformations during impact and attempt of sperm head penetration relative to different sperm impact angles (SIA) were studied. The sperm-oocyte contact was defined as non-linear frictional contact. A transient structural analysis at 37°C revealed that, from the mechanical standpoint there are SIA that are more favorable for possible ZP penetration due to larger equivalent stress of ZP. An "slip-stick" resembling effect was identified for almost all examined SIA. The sperm head-ZP contact area increases as SIA decreases. Favorable ZP-stress state for sperm penetration regarding SIA are discussed.

Medial meniscal displacement and strain in three dimensions under compressive loads: MR assessment.

PURPOSE: To investigate the 3D displacement and the local strain of the medial meniscus and its attachments under compressive loading. MATERIALS AND METHODS: Magnetic resonance imaging (MRI) scans of six porcine knee joints were performed under unloaded and loaded conditions (100% and 200% body weight [BW]). Volumes were registered to obtain a 3D displacement field of the medial meniscus and its attachments, which were divided into five anatomic compartments. Finally, displacements of the center of mass of each compartment and the local strain were analyzed. RESULTS: The meniscus and its attachments significantly displaced by up to 2.6 ± 1.2 mm (P < 0.01) under knee joint loads of 200% BW. An increase of 0.9 mm in the distance between posterior and anterior horn (P < 0.001) was observed. The meniscus and its attachment showed an average radial stretch of 0.6%, an average circumferential stretch of 0.9%, and an average axial compression of 11.6% at 200% BW. CONCLUSION: High-resolution MRI was successfully combined with image registration to investigate the displacement and strain of the meniscus and its attachments under compression. The results of this study contribute to the basic understanding of meniscal movement which may impact the design of meniscal implants and the validation of finite element models in the future.

Screening Selection of Hydrogen Evolution-Inhibiting and Zincphilic Alloy Anode for Aqueous Zn Battery.

The hydrogen evolution reaction (HER) and Zn dendrites growth are two entangled detrimental effects hindering the application of aqueous Zn batteries. The alloying strategy is studied to be a convenient avenue to stabilize Zn anodes, but there still lacks global understanding when selecting reliable alloy elements. Herein, it is proposed to evaluate the Zn alloying elements in a holistic way by considering their effects on HER, zincphilicity, price, and environmental-friendliness. Screening selection sequence is established through the theoretical evaluation of 17 common alloying elements according to their effects on hydrogen evolution and Zn nucleation thermodynamics. Two alloy electrodes with opposite predicted effects are prepared for experimental demonstration, i.e., HER-inhibiting Bi and HER-exacerbating Ni. Impressively, the optimum ZnBi alloy anode exhibits one order of magnitude lower hydrogen evolution rate than that of the pure Zn, leading to an ultra-long plating/stripping cycling life for more than 11 000 cycles at a high current density of 20 mA cm-2 and 81% capacity retention for 170 cycles in a Zn-V2O5 pouch cell. The study not only proposes a holistic alloy selection principle for Zn anode but also identifies a practically effective alloy element.

High Performance Mg Alloy with Designed Microstructure and Phases.

A high strength and ductile Mg-Gd-Y-Zn-Zr alloy was designed and fabricated. The local strain evolution of the alloys during plastic deformation was analyzed using high-resolution digital image correlation (DIC). The results showed that the ß particles, nano-sized γ' phases, and LPSO phases were distributed in the as-extruded alloy and a bimodal microstructure was exhibited, including elongated un-dynamic recrystallized grains and fine dynamic recrystallized grains. With increasing extrusion ratio, the grain size remained, with the volume fraction of dynamic recrystallization of the as-extruded alloy increasing from 30% to 75%, and the as-extruded alloy exhibited a high strength-ductility synergy, which is attributed to the grain refinement, extensive ß particles, and elongated block-shaped LPSO phases. The strain evolution analysis showed that a strain-transfer from un-DRXed regions to adjacent DRXed regions and LPSO phases can promote uniform plastic deformation, which tends to improve the ductility of the alloy.

Towards Understanding {10-11}-{10-12} Secondary Twinning Behaviors in AZ31 Magnesium Alloy during Fatigue Deformation.

Tensile-compression fatigue deformation tests were conducted on AZ31 magnesium alloy at room temperature. Electron backscatter diffraction (EBSD) scanning electron microscopy was used to scan the microstructure near the fatigue fracture surface. It was found that lamellar {10-11}-{10-12} secondary twins (STs) appeared inside primary {10-11} contraction twins (CTs), with a morphology similar to the previously discovered {10-12}-{10-12} STs. However, through detailed misorientation calibration, it was determined that this type of secondary twin is {10-11}-{10-12} ST. Through calculation and analysis, it was found that the matrix was under compressive stress in the normal direction (ND) during fatigue deformation, which was beneficial for the activation of primary {10-11} CTs. The local strain accommodation was evaluated based on the geometric compatibility parameter (m') combined with the Schmid factor (SF) of the slip system, leading us to propose and discuss the possible formation mechanism of this secondary twin. The analysis results indicate that when the local strain caused by basal slip at the twin boundaries cannot be well transmitted, {10-11}-{10-12} STs are activated to coordinate the strain, and different loading directions lead to different formation mechanisms. Moreover, from the microstructure characterization near the entire fracture surface, we surmise that the presence of such secondary twins is not common.

Locally Strained 2D Materials: Preparation, Properties, and Applications.

2D materials are promising for strain engineering due to their atomic thickness and exceptional mechanical properties. In particular, non-uniform and localized strain can be induced in 2D materials by generating out-of-plane deformations, resulting in novel phenomena and properties, as witnessed in recent years. Therefore, the locally strained 2D materials are of great value for both fundamental studies and practical applications. This review discusses techniques for introducing local strains to 2D materials, and their feasibility, advantages, and challenges. Then, the unique effects and properties that arise from local strain are explored. The representative applications based on locally strained 2D materials are illustrated, including memristor, single photon emitter, and photodetector. Finally, concluding remarks on the challenges and opportunities in the emerging field of locally strained 2D materials are provided.

Study of coinfection with local strains of infectious bursal disease virus and infectious bronchitis virus in specific pathogen-free chickens.

Immunosuppressive diseases cause great losses in the poultry industry, increasing the susceptibility to infections by other pathogens and promoting a suboptimal response to vaccination. Among them, infectious bursal disease virus (IBDV) arises as one of the most important around the world. IBDV infects immature B lymphocytes, affecting the immune status of birds and facilitating infections by other pathogens such as avian infectious bronchitis virus (IBV). Although it has been reported that the interaction between these viruses increases IBV clinical signs, there are no actual studies about the interaction between regional circulating isolates that validate this statement. In this context, the objective of our work was to evaluate the effect of the interaction between local isolates of IBDV (belonging to genogroup 4) and IBV (lineage GI-16) in chickens. Thus, specific pathogen-free chickens were orally inoculated with IBDV genogroup (G) 4 or with PBS at 5 d of age. At 14-days postinoculation (dpi) the animals were intratracheally inoculated with a GI-16 IBV or with PBS. At multiple time points, groups of birds were euthanized and different parameters such as histological damage, viral load, lymphocyte populations and specific antibodies were evaluated. The success of IBDV infection was confirmed by the severity of bursal atrophy, viral detection, and presence of anti-IBDV antibodies. In IBV-infected animals, the presence of viral genome was detected in both kidney and bursa. The coinfected animals showed higher degree of lymphocyte infiltration in kidney, higher rate of animals with IBV viral genome in bursa at 28 dpi, and a clear decrease in antibody response against IBV at 28, 35, and 40 dpi. The results indicate that the infection with the local isolate of IBDV affects the immune status of the chickens, causing major severe damage, in response to IBV infection, which could consequently severely affect the local poultry industry.

Effect of Pulsed Current-Assisted Tension on the Mechanical Behavior and Local Strain of Nickel-Based Superalloy Sheet.

Electrically assisted (EA) forming is a plastic forming technique under the coupling action of multiple energy fields, such as force field, temperature field, and electric field. It is suitable for the forming of difficult-to-deform materials such as nickel-based superalloys. In this paper, uniaxial tensile tests on nickel-based superalloy sheets were carried out using the pulsed current assisted with different parameters. The experimental results show that the flow stress of the material decreased with the increase in the current density under a high-frequency pulsed current, and the Joule heating effect explains the flow stress drop. In the pulsed current application process, the different types of Portevin-Le Chatelier phenomena appeared with the increase in the current density. The decrease in elongation assisted by the pulsed current was explained by analyzing the inhomogeneity of the maximum Joule heating temperature distribution. In addition, the digital image correlation (DIC) analysis was used to analyze the local strain behavior of the pulsed current-assisted tensile process. Under the application of a high-frequency pulse current, the specimen exerted an inhomogeneous temperature increase and local hot pressing stress, which resulted in the inhomogeneous distribution of the local strain.

Biomechanical characterization of tissue types in murine dissecting aneurysms based on histology and 4D ultrasound-derived strain.

Abdominal aortic aneurysm disease is the local enlargement of the aorta, typically in the infrarenal section, causing up to 200,000 deaths/year. In vivo information to characterize the individual elastic properties of the aneurysm wall in terms of rupture risk is lacking. We used a method that combines 4D ultrasound and direct deformation estimation to compute in vivo 3D Green-Lagrange strain in murine angiotensin II-induced dissecting aortic aneurysms, a commonly used mouse model. After euthanasia, histological staining of cross-sectional sections along the aorta was performed in areas where in vivo strains had previously been measured. The histological sections were segmented into intact and fragmented elastin, thrombus with and without red blood cells, and outer vessel wall including the adventitia. Meshes were then created from the individual contours based on the histological segmentations. The isolated contours of the outer wall and lumen from both imaging modalities were registered individually using a coherent point drift algorithm. 2D finite element models were generated from the meshes, and the displacements from the registration were used as displacement boundaries of the lumen and wall contours. Based on the resulting deformed contours, the strains recorded were grouped according to segmented tissue regions. Strains were highest in areas containing intact elastin without thrombus attachment. Strains in areas with intact elastin and thrombus attachment, as well as areas with disrupted elastin, were significantly lower. Strains in thrombus regions with red blood cells were significantly higher compared to thrombus regions without. We then compared this analysis to statistical distribution indices and found that the results of each aligned, elucidating the relationship between vessel strain and structural changes. This work demonstrates the possibility of advancing in vivo assessments to a microstructural level ultimately improving patient outcomes.

Using averaged models from 4D ultrasound strain imaging allows to significantly differentiate local wall strains in calcified regions of abdominal aortic aneurysms.

Abdominal aortic aneurysms are a degenerative disease of the aorta associated with high mortality. To date, in vivo information to characterize the individual elastic properties of the aneurysm wall in terms of rupture risk is lacking. We have used time-resolved 3D ultrasound strain imaging to calculate spatially resolved in-plane strain distributions characterized by mean and local maximum strains, as well as indices of local variations in strains. Likewise, we here present a method to generate averaged models from multiple segmentations. Strains were then calculated for single segmentations and averaged models. After registration with aneurysm geometries based on CT-A imaging, local strains were divided into two groups with and without calcifications and compared. Geometry comparison from both imaging modalities showed good agreement with a root mean squared error of 1.22 ± 0.15 mm and Hausdorff Distance of 5.45 ± 1.56 mm (mean ± sd, respectively). Using averaged models, circumferential strains in areas with calcifications were 23.2 ± 11.7% (mean ± sd) smaller and significantly distinguishable at the 5% level from areas without calcifications. For single segmentations, this was possible only in 50% of cases. The areas without calcifications showed greater heterogeneity, larger maximum strains, and smaller strain ratios when computed by use of the averaged models. Using these averaged models, reliable conclusions can be made about the local elastic properties of individual aneurysm (and long-term observations of their change), rather than just group comparisons. This is an important prerequisite for clinical application and provides qualitatively new information about the change of an abdominal aortic aneurysm in the course of disease progression compared to the diameter criterion.

Micro-Raman for Local Strain Evaluation of GaN LEDs and Si Chips Assembled on Cu Substrates.

Integrated circuits are created by interfacing different materials, semiconductors, and metals, which are appropriately deposited or grown on substrates and layers soldered together. Therefore, the characteristics of starting materials and process temperatures are of great importance, as they can induce residual strains in the final assembly. Identifying and quantifying strain becomes strategically important in optimizing processes to enhance the performance, duration, and reliability of final devices. This work analyzes the thermomechanical local strain of semiconductor materials used to realize LED modules for lighting applications. Gallium Nitride active layers grown on sapphire substrates and Si chips are assembled by soldering with eutectic AuSn on copper substrates and investigated by Raman spectroscopy in a temperature range of -50 to 180 °C. From the Raman mapping of many different samples, it is concluded that one of the leading causes of strain in the GaN layer can be attributed to the differences in the thermal expansion coefficient among the various materials and, above all, among the chip, interconnection material, and substrate. These differences are responsible for forces that slightly bend the chip, causing strain in the GaN layer, which is most compressed in the central region of the chip and slightly stretched in the outer areas.