Multimodal pulmonary clearance kinetics of carbon black nanoparticles deposited in the lungs of rats: the role of alveolar macrophages.

BACKGROUND: Alveolar macrophages (AMs) have been predicted to affect the pulmonary clearance of nanomaterials; however, their qualitative and quantitative roles are poorly understood. In this study, carbon black nanoparticles (CBNPs) were instilled into the lungs of Wistar rats at 30, 100, and 300 µg/rat. The concentrations of particles in organs, including the lung, lung-associated lymph nodes (LALN), liver, spleen, and kidney, were evaluated at days 0 (immediately after instillation), 1, 7, 28, 60, and 90 post-instillation. RESULTS: The results indicated a multimodal pulmonary clearance pattern for CBNPs: slow clearance until day 28, fast clearance from days 28 to 60, and slow clearance from days 60 to 90. To determine the mechanism of this unique clearance pattern, CBNPs were instilled into AM-depleted rats using clodronate liposomes (CLO). At 28 days after instillation, the CBNP levels in the lungs treated with CLO showed about 31% higher reduction than in normal rats. In addition, the concentration of CBNPs in LALN treated with CLO significantly increased on day 28, whereas in normal rats, no detectable levels were observed. CONCLUSIONS: This result highlights that the prolonged retention of poorly soluble NPs in the lung until day 28 is mediated by the phagocytosis of AMs, and the fast clearance between days 28-60 is due to the turnover time of AMs, estimated around 1-2 months after birth. Similarly, new generations of AMs mediate the slow phase between days 60 and 90. However, further studies are needed to understand the multimodal clearance mechanism and the modulation of pulmonary clearance of poorly soluble NPs.

Lung asbestos fiber burden analysis: effects of the counting rules for legal medicine evaluations.

OBJECTIVES: The work shows the effect of counting rules, such as analysis magnification and asbestos fiber dimension to be count (with length ≥5 µm or also asbestos fibers with length <5 µm) in the lung asbestos fiber burden analysis for legal medicine evaluations. METHODS: On the same lung tissue samples, two different analyses were carried out to count any asbestos fibers with length ≥1 µm and with length ≥5 µm. Results of the amphibole burden of the two analyses were compared by linear regression analysis on log10-transformed values. RESULTS: The analysis should be carried out at an appropriate magnification and on samples prepared in such a way as they allow the counting of very fine fibers. If the analysis is limited to the asbestos fibers with length ≥5 µm, there is a high risk of not detecting possible residual chrysotile fiber burden and thinner crocidolite asbestos fibers. CONCLUSIONS: On average we estimated that 1 amphibole fiber with length ≥5 µm corresponds to ∼8 amphibole fibers with length ≥1 µm in the lung. The values of the Helsinki criteria should be updated taking this into account.

Time-course analysis of pulmonary inflammation induced by intratracheal instillation of nanosized crystalline silica particles in F344 rats.

Crystalline silica is an important cause of serious pulmonary diseases, and its toxic potential is known to be associated with its surface electrical properties. However, in vivo data clarifying the relevance of silica's toxic potential, especially its long-term effects, remain insufficient. To investigate the contribution of physico-chemical property including surface potential on the hazard of nanocrystalline silica, we performed single intratracheal instillation testing using five different crystalline silicas in a rat model and assessed time-course changes in pulmonary inflammation, lung burden, and thoracic lymph node loads. Silica-nanoparticles were prepared from two commercial products (Min-U-Sil5 [MS5] and SIO07PB [SPB]) using three different pretreatments: centrifugation (C), grinding (G), and surface dissolving (D). The five types of silica particles-MS5, MS5_C, SPB_C, SPB_G, and SPB_D-were intratracheally instilled into male F344 rats at doses of 0 mg/kg (purified water), 0.22 mg/kg (SPB), and 0.67, 2, or 6 mg/kg (MS5). Bronchoalveolar lavage, a lung burden analysis, and histopathological examination were performed at 3, 28, and 91 days after instillation. Granuloma formation was present in MS5 group at 91 days after instillation, although granuloma formation was suppressed in MS5_C group, which had a smaller particle size. SPB_C induced severe and progressive inflammation and kinetic lung overload, whereas SPB_G and SPB_D induced only slight and transient acute inflammation. Our results support that in vivo toxic potential of nanosilica by intratracheal instillation may involve with surface electrical properties leading to prolonged effect and may not be dependent not only on surface properties but also on other physico-chemical properties.

Two-year intermittent exposure of a multiwalled carbon nanotube by intratracheal instillation induces lung tumors and pleural mesotheliomas in F344 rats.

BACKGROUND: A mounting number of studies have been documenting the carcinogenic potential of multiwalled carbon nanotubes (MWCNTs); however, only a few studies have evaluated the pulmonary carcinogenicity of MWCNTs in vivo. A 2-year inhalation study demonstrated that MWNT-7, a widely used MWCNT, was a pulmonary carcinogen in rats. In another 2-year study, rats administered MWNT-7 by intratracheal instillation at the beginning of the experimental period developed pleural mesotheliomas but not lung tumors. To obtain data more comparable with rats exposed to MWNT-7 by inhalation, we administered MWNT-7 to F344 rats by intratracheal instillation once every 4-weeks over the course of 2 years at 0, 0.125, and 0.5 mg/kg body weight, allowing lung burdens of MWNT-7 to increase over the entire experimental period, similar to the inhalation study. RESULTS: Absolute and relative lung weights were significantly elevated in both MWNT-7-treated groups. Dose- and time-dependent toxic effects in the lung and pleura, such as inflammatory, fibrotic, and hyperplastic lesions, were found in both treated groups. The incidences of lung carcinomas, lung adenomas, and pleural mesotheliomas were significantly increased in the high-dose group compared with the control group. The pleural mesotheliomas developed mainly at the mediastinum. No MWNT-7-related neoplastic lesions were noted in the other organs. Cytological and biochemical parameters of the bronchoalveolar lavage fluid (BALF) were elevated in both treated groups. The lung burden of MWNT-7 was dose- and time-dependent, and at the terminal necropsy, the average value was 0.9 and 3.6 mg/lung in the low-dose and high-dose groups, respectively. The number of fibers in the pleural cavity was also dose- and time-dependent. CONCLUSIONS: Repeated administration of MWNT-7 by intratracheal instillation over the 2 years indicates that MWNT-7 is carcinogenic to both the lung and pleura of rats, which differs from the results of the 2 carcinogenicity tests by inhalation or intratracheal instillation.

The Use of Nanomaterial In Vivo Organ Burden Data for In Vitro Dose Setting.

Effects of nanomaterials are usually observed at higher concentrations in vitro compared to animal studies. This is pointing to differences between in vivo situations and generally less complex in vitro models. These differences concern toxicodynamics and the internal exposure (at the target cells of the in vitro and in vivo test system). The latter can be minimized by appropriate in vivo to in vitro dose extrapolations (IVIVE). An IVIVE six-step procedure is proposed here: 1) determine in vivo exposure; 2) identify in vivo organ burden at lowest observed adverse effect concentration; 3) extrapolate in vivo organ burden to in vitro effective dose; 4) extrapolate in vitro effective dose to nominal concentration; 5) set dose ranges to establish dose-response relationships; and 6) consider uncertainties and specificities of in vitro test system. Assessing the results of in vitro studies needs careful consideration of discrepancies between in vitro and in vivo models: apart from different endpoints (usually cellular responses in vitro and adverse effects on organs or organisms in vivo), nanomaterials can also have a different potency in relatively simple in vitro models and the more complex corresponding organ in vivo. IVIVE can, nonetheless, reduce the differences in exposures.

Carbon nanomaterial-derived lung burden analysis using UV-Vis spectrophotometry and proteinase K digestion.

BACKGROUND: The quantification of nanomaterials accumulated in various organs is crucial in studying their toxicity and toxicokinetics. However, some types of nanomaterials, including carbon nanomaterials (CNMs), are difficult to quantify in a biological matrix. Therefore, developing improved methodologies for quantification of CNMs in vital organs is instrumental in their continued modification and application. RESULTS: In this study, carbon black, nanodiamond, multi-walled carbon nanotube, carbon nanofiber, and graphene nanoplatelet were assembled and used as a panel of CNMs. All CNMs showed significant absorbance at 750 nm, while their bio-components showed minimal absorbance at this wavelength. Quantification of CNMs using their absorbance at 750 nm was shown to have more than 94% accuracy in all of the studied materials. Incubating proteinase K (PK) for 2 days with a mixture of lung tissue homogenates and CNMs showed an average recovery rate over 90%. The utility of this method was confirmed in a murine pharyngeal aspiration model using CNMs at 30 µg/mouse. CONCLUSIONS: We developed an improved lung burden assay for CNMs with an accuracy > 94% and a recovery rate > 90% using PK digestion and UV-Vis spectrophotometry. This method can be applied to any nanomaterial with sufficient absorbance in the near-infrared band and can differentiate nanomaterials from elements in the body, as well as the soluble fraction of the nanomaterial. Furthermore, a combination of PK digestion and other instrumental analysis specific to the nanomaterial can be applied to organ burden analysis.

Mode of silver clearance following 28-day inhalation exposure to silver nanoparticles determined from lung burden assessment including post-exposure observation periods.

Recently revised OECD inhalation toxicity testing guidelines require measurements of lung burden immediately after and for periods following exposure for nanomaterials. Lung burden is a function of pulmonary deposition and retention of nanoparticles. Using lung burden studies as per OECD guidelines, it may be possible to assess clearance mechanisms of nanoparticles. In this study, male rats were exposed to silver nanoparticle (AgNP) aerosols (18.1-19.6 nm) generated from a spark generator. Exposure groups consisted of (1) control (fresh air), (2) low (31.2 ± 8.5 µg/m3), (3) moderate (81.8 ± 11.4 µg/m3), and (4) high concentrations (115.6 ± 30.5 µg/m3). Rats were exposed for 6-h/day, 5-days/week for 4 weeks (28-days) based on the revised OECD test guideline 412. Bronchoalveolar lavage (BAL) fluids were collected on post-exposure observation (PEO)-1 and PEO-7 days and analyzed for inflammatory cells and inflammatory biomarkers. The lung burdens of Ag from AgNPs were measured on PEO-1, PEO-7, and PEO-28 days to obtain quantitative mass concentrations per lung. Differential counting of blood cells and inflammatory biomarkers in BAL fluid and histopathological evaluation of lung tissue indicated that exposure to the high concentrations of AgNP aerosol induced inflammation at PEO-1, slowly resolved at PEO-7 and completely resolved at PEO-28 days. Lung burden measurement suggested that Ag from AgNPs was cleared through two different modes; fast and slow clearance. The fast clearance component was concentration-dependent with half-times ranging from two to four days and clearance rates of 0.35-0.17/day-1 from low to high concentrations. The slow clearance had half-times of 100, 57, and 76 days and clearance rates of 0.009, 0.012, and 0.007/day-1 for the high, moderate and low concentration exposure. The exact mechanism of clearance is not known currently. The fast clearance component which was concentration-dependent could be dependent on the dissolution of AgNPs and the slow clearance would be due to slow clearance of the low dissolution AgNPs secondary particles originating from silver ions reacting with biogenic anions. These secondary AgNPs might be cleared by mechanisms other than dissolution such as mucociliary escalation, translocation to the lymphatic system or other organs.

Comments on "Dimensions of elongated mineral particles with implications for pathogenicity and classification as asbestiform versus cleavage fragments".

Roggli and Green have reported their study of the dimensions of fibers extracted from the tissues of cases examined in their laboratory, and have drawn conclusions about the pathogenicity of Elongated Mineral Particles and their classification as asbestiform versus cleavage fragments. There are aspects of their methodology and discussion that would benefit from examination. Roggli and Green have relied upon a paper by Harper et al. for their definitions of asbestiform and cleavage fragments. Unfortunately, they have misinterpreted the work of those authors who have concluded that the best criterion is a particle width <1µm. Roggli and Green conclude that 'Our findings demonstrate the lack of pathogenicity of fibers less than 10 µm long or likelihood of cleavage fragments for fibers less than 10µm long and greater than 1.0µm in diameter has little or no effect on the classification of commercial amphibole fibers using our analytical methodology. On the other hand, both lack of pathogenicity and likelihood of cleavage fragments apply to a significant proportion of noncommercial amphiboles identified using our counting scheme.' This is not true. The study of Roggli and Green was a simple fiber counting study with no control population. The design of such a study does not allow the investigator to draw any conclusions about pathogenicity, or lack thereof.

Biopersistence of NiO and TiO2 Nanoparticles Following Intratracheal Instillation and Inhalation.

The hazards of various types of nanoparticles with high functionality have not been fully assessed. We investigated the usefulness of biopersistence as a hazard indicator of nanoparticles by performing inhalation and intratracheal instillation studies and comparing the biopersistence of two nanoparticles with different toxicities: NiO and TiO2 nanoparticles with high and low toxicity among nanoparticles, respectively. In the 4-week inhalation studies, the average exposure concentrations were 0.32 and 1.65 mg/m³ for NiO, and 0.50 and 1.84 mg/m³ for TiO2. In the instillation studies, 0.2 and 1.0 mg of NiO nanoparticles and 0.2, 0.36, and 1.0 mg of TiO2 were dispersed in 0.4 mL water and instilled to rats. After the exposure, the lung burden in each of five rats was determined by Inductively Coupled Plasma-Atomic Emission Spectrometer (ICP-AES) from 3 days to 3 months for inhalation studies and to 6 months for instillation studies. In both the inhalation and instillation studies, NiO nanoparticles persisted for longer in the lung compared with TiO2 nanoparticles, and the calculated biological half times (BHTs) of the NiO nanoparticles was longer than that of the TiO2 nanoparticles. Biopersistence also correlated with histopathological changes, inflammatory response, and other biomarkers in bronchoalveolar lavage fluid (BALF) after the exposure to nanoparticles. These results suggested that the biopersistence is a good indicator of the hazards of nanoparticles.

Effects of inhalation of multi-walled carbon nanotube (MWCNT) on respiratory syncytial virus (RSV) infection in mice.

Multi-walled carbon nanotubes (MWCNTs), a kind of nanomaterial, are widely used in battery electrodes and composite materials, but the adverse effects associated with their accumulation in the living body have not been sufficiently investigated. MWCNTs are a fibrous material with molecules similar to asbestos fibers, and there are concerns about its effects on the respiratory system. In this study, we conducted a risk assessment by exposing mice using a previously developed nanomaterial inhalation exposure method. We quantified the exposure in the lungs by a lung burden test, evaluated the deterioration due to pneumonia using respiratory syncytial virus (RSV) infection, and measured inflammatory cytokines in bronchoalveolar lavage fluid (BALF). As a result, in the lung burden test, the amount of MWCNT in the lung increased according to the inhalation dose. In the RSV infection experiment, CCL3, CCL5, and TGF-ß, which are indicators of inflammation and lung fibrosis, were elevated in the MWCNT-exposed group. Histological examination revealed cells phagocytosing MWCNT fibers. These phagocytic cells were also seen during the recovery period from RSV infection. The present study found that MWCNT remained in the lungs for about a month or more, suggesting that the fibers may continue to exert immunological effects on the respiratory system. Furthermore, the inhalation exposure method enabled the exposure of nanomaterials to the entire lung lobe, allowing a more detailed evaluation of the effects on the respiratory system.

Differential particle and ion kinetics of silver nanoparticles in the lungs and biotransformation to insoluble silver sulfide.

The measurement of nanoparticles (NPs) in a biological matrix is essential in various toxicity studies. However, the current knowledge has limitations in differentiating particulate and ionic forms and further identification of their biotransformation. Herein, we evaluate the biotransformation and differential lung clearance kinetics of particulate and ionic forms using PEGylated silver NPs (AgNP-PEGs; 47.51 nm) and PEGylated gold NPs (AuNP-PEGs; 11.76 nm). At 0, 3, and 6 h and 1, 3, 7, and 14 days after a single pharyngeal aspiration in mice at 25 µg/mouse, half of the lung is digested by proteinase K (PK) to separate particulates and ions, and the other half is subjected to the acid digestion method for comparison. The quantitative and qualitative evaluation of lung clearance kinetics suggests that AgNP-PEGs are quickly dissolved and transformed into insoluble silver sulfide (Ag2S), which shows a fast-clearing early phase (0 -6 h; particle T1/2: 4.8 h) and slow-clearing late phase (1 -14 days; particle T1/2: 13.20 days). In contrast, AuNP-PEGs were scarcely cleared or biotransformed in the lungs for 14 days. The lung clearance kinetics of AgNPs and biotransformation shown in this study can be informed by the PK digestion method and cannot be obtained using the acid digestion method.

Exposure of Rats to Multi-Walled Carbon Nanotubes: Correlation of Inhalation Exposure to Lung Burden, Bronchoalveolar Lavage Fluid Findings, and Lung Morphology.

To evaluate lung toxicity due to inhalation of multi-walled carbon nanotubes (MWCNTs) in rats, we developed a unique MWCNT aerosol generator based on dry aerosolization using the aerodynamic cyclone principle. Rats were exposed to MWNT-7 (also known as Mutsui-7 and MWCNT-7) aerosolized using this device. We report here an analysis of previously published data and additional unpublished data obtained in 1-day, 2-week, 13-week, and 2-year inhalation exposure studies. In one-day studies, it was found that approximately 50% of the deposited MWNT-7 fibers were cleared the day after the end of exposure, but that clearance of the remaining fibers was markedly reduced. This is in agreement with the premise that the rapidly cleared fibers were deposited in the ciliated airways while the slowly cleared fibers were deposited beyond the ciliated airways in the respiratory zone. Macrophage clearance of MWNT-7 fibers from the alveoli was limited. Instead of macrophage clearance from the alveoli, containment of MWNT-7 fibers within induced granulomatous lesions was observed. The earliest changes indicative of pulmonary toxicity were seen in the bronchoalveolar lavage fluid. Macrophage-associated inflammation persisted from the one-day exposure to MWNT-7 to the end of the two-year exposure period. Correlation of lung tumor development with MWNT-7 lung burden required incorporating the concept of area under the curve for the duration of the study; the development of lung tumors induced by MWNT-7 correlated with lung burden and the duration of MWNT-7 residence in the lung.

Asbestos Lung Burden Does Not Predict Survival in Malignant Pleural Mesothelioma: A Necropsy-Based Study of 185 Cases.

INTRODUCTION: Malignant pleural mesothelioma is an asbestos-related disease with poor survival. The prognostic role of histologic subtype is well established. Some studies (without a biological hypothesis) suggested that higher asbestos lung burden is associated with reduced survival. METHODS: We selected subjects from two series of necropsies: residents in Brescia province (North-West Italy) and workers (or persons living with them) employed in the Monfalcone shipyards (North-East Italy). Asbestos fibers and asbestos bodies in lung samples were counted using a scanning electron and an optical microscope, respectively. Separately in the two series, we analyzed median survival time and fitted multivariable Cox regression models (adjusted for sex, period and age at diagnosis, and histopatholocical diagnosis) to calculate hazard ratios (HRs) and 95% confidence intervals (CIs) for three levels of asbestos fiber counts (reference: <1 million fibers/g of dry lung tissue). RESULTS: We analyzed 185 necropsies, 83 in Brescia and 102 in Monfalcone. Despite a much higher lung burden in Monfalcone patients, median survival was slightly shorter in Brescia (8.3 mo) than in Monfalcone (10.2 mo). In Brescia, medium (1.0-9.9) and high (10+) fiber burden HRs were 0.91 (95% CI: 0.54-1.53) and 1.23 (95% CI: 0.41-3.70), respectively. In Monfalcone, the corresponding HRs were 1.18 (95% CI: 0.59-2.35) and 1.63 (95% CI: 0.77-3.45), respectively. CONCLUSIONS: No relationship between asbestos lung burden and survival was found. Histologic subtype was the strongest prognostic determinant.

Animal Welfare Considerations When Conducting OECD Test Guideline Inhalation and Toxicokinetic Studies for Nanomaterials.

The OECD test guidelines for animal experiments play an important role in evaluating the chemical hazards. Animal tests performed using OECD guidelines, especially when the good laboratory practice (GLP) principle is applied, reduce the duplication of toxicity testing and ensure the best mutual acceptance of data by the OECD's Mutual Acceptance of Data (MAD). The OECD inhalation toxicity test guidelines 412 (28 days) and 413 (90 days) have been revised. These OECD guidelines now reflect the inclusion of nanomaterials and recent scientific and technological developments. In particular, these test guidelines aim to evaluate the bronchoalveolar lavage fluid in the lungs for objective toxicity evaluation, along with the existing subjective histopathological evaluation. For solid particles, the lung burden measurement of particles is required for toxicokinetic studies and, in order to properly perform a toxicokinetic study, two post-exposure observations are recommended. In light of the revised OECD guidelines, we propose a method to reduce the number of animals when testing is conducted for nanomaterials.

Estimates of lung burden risk associated with long-term exposure to TiO2 nanoparticles as a UV-filter in sprays.

Titanium dioxide (TiO2) nanoparticles (NPs) are employed as an ultraviolet filter in sunscreen products because of their high ultraviolet absorptivity. However, sunscreen sprays may pose health risks due to the toxicity of inhaled TiO2 NPs. Therefore, we estimated the potential human health risk posed by inhaled TiO2 NPs emitted from sunscreen sprays. The physiology-based lung model was employed to predict the lung TiO2 NPs burden caused by long-term exposure. A Hill-based dose-response model described the relationship between lung inflammation and TiO2 NP accumulation. The Weibull threshold model was used to estimate the threshold amount of accumulation inducing 0.5% of the maximum increase in neutrophils. The potential health risk was assessed using a hazard quotient-based probabilistic risk model. All data obtained to date indicate that application of sunscreen sprays poses no significant health risk. However, using data simulations based on the threshold criterion, we discovered that in terms of practical strategies for preventing the risks posed by inhaled TiO2 NPs emitted from spray products, the suggested daily use amount and pressing number are 40 g (95% confidence interval: 11-146 g) and 66 (18-245), respectively. In this study, we successfully translated the potential health risk of long-term exposure to NP-containing sunscreen sprays and recommendations for daily application into mechanistic insights.

Inhalation Toxicity of Talc.

Respirable talc powder (RTP) is a complex mineral mixture of talc along with accessory minerals, including tremolite, anthophyllite, quartz, magnesite, dolomite, antigorite, lizardite, and chlorite. The industrial mining, milling, and processing of talc ore is associated with elevated incidences of fibrotic and neoplastic diseases, which are also seen among workers exposed to RTP in secondary industries and individuals using processed cosmetic talc for personal use. There is controversial evidence of a link between the talc-induced lung diseases and a potential contamination with asbestos fibers. This controversy is fueled by inadequate exposure data and the complex mineralogy and terminology of the accessory minerals. Talc aerosols exhibit a wide range of mineral habits, including particulates and fibrous structures that have dimensional and compositional characteristics related to the development of asbestos-related lung disease. The inhalation toxicology of RTP is based on the analysis of occupational hygiene and animal inhalation studies conducted between the 1940s and the 1990s and more recent mechanistic studies conducted both in vivo and in vitro. The review of talc toxicity studies reveals that the occupational studies provide only equivocal links between any of the components of the aerosols and the development of pulmonary cancer; however, there is substantial evidence of an association between the aerosols and pleural and pulmonary fibrosis and the development of nonmalignant respiratory disease. The animal inhalation and implantation studies appear to be less than optimal, which also appears to be true for the in vivo and in vitro studies. The mechanistic studies have identified the key pathogenic characteristics of asbestos to be long and thin fibers that are durable in lung tissues and fluids. Talc toxicity studies show that talc particles and fibers are durable and can remain in the lung for up to 40 years after the end of exposure. This extended tissue residence is considered to constitute a continuing tissue exposure that is capable of inducing the documented inflammatory and proliferative response. There is less consensus as to whether there is a threshold fiber length effect, as long, thin fibers (>5 µm) form only a small fraction of talc aerosols and the possible role of fibers >5 µm in the translocation from the lung to the pleura and their association with pleural fibrotic and carcinogenic lesions. Long, thin fibers are preferentially deposited in hot spots in the lung, such as airway bifurcations, areas typically associated with the development of lung cancer. The platy structures typical of talc can form oblate structures behaving more as fibers in the air stream, and these have also been shown to deposit preferentially in such locations. The review of the inhalation toxicity of talc provides a plausible explanation for the carcinogenic potential of RTP.

Carcinogenicity of multi-walled carbon nanotubes: challenging issue on hazard assessment.

OBJECTIVES: This report reviews the carcinogenicity of multi-walled carbon nanotubes (MWCNTs) in experimental animals, concentrating on MWNT-7, a straight fibrous MWCNT. METHODS: MWCNTs were administered to mice and rats by intraperitoneal injection, intrascrotal injection, subcutaneous injection, intratracheal instillation and inhalation. RESULTS: Intraperitoneal injection of MWNT-7 induced peritoneal mesothelioma in mice and rats. Intrascrotal injection induced peritoneal mesothelioma in rats. Intratracheal instillation of MWCNT-N (another straight fibrous MWCNT) induced both lung carcinoma and pleural mesothelioma in rats. In the whole body inhalation studies, in mice MWNT-7 promoted methylcholanthrene-initiated lung carcinogenesis. In rats, inhalation of MWNT-7 induced lung carcinoma and lung burdens of MWNT-7 increased with increasing concentration of airborne MWNT-7 and increasing duration of exposure. CONCLUSIONS: Straight, fibrous MWCNTs exerted carcinogenicity in experimental animals. Phagocytosis of MWCNT fibers by macrophages was very likely to be a principle factor in MWCNT lung carcinogenesis. Using no-observed-adverse-effect level-based approach, we calculated that the occupational exposure limit (OEL) of MWNT-7 for cancer protection is 0.15 µg/m3 for a human worker. Further studies on the effects of the shape and size of MWCNT fibers and mode of action on the carcinogenicity are required.

Thirteen-week study of toxicity of fiber-like multi-walled carbon nanotubes with whole-body inhalation exposure in rats.

Cancer development due to fiber-like straight type of multi-walled carbon nanotubes (MWCNTs) has raised concerns for human safety because of its shape similar to asbestos. To set concentrations of MWCNT for a rat carcinogenicity study, we conducted a 13-week whole body inhalation study. F344 male and female rats, 6-week-old at the commencement of the study, were exposed by whole-body inhalation to MWCNT at concentrations of 0, 0.2, 1 and 5 mg/m(3) with a generation and exposure system utilizing the cyclone sieve method. Measured concentrations in the exposure chambers were 0.20 ± 0.02, 1.01 ± 0.11 and 5.02 ± 0.25 mg/m(3) for 13 weeks. The MMAD (GSD) of MWCNT were 1.4-1.6 µm (2.3-3.0), and mean width and length were 94.1-98.0 nm and 5.53-6.19 µm, respectively, for each target concentration. Lung weights were increased 1.2-fold with 1 mg/m(3) and 1.3-fold with 5 mg/m(3) in both sexes compared to the controls. In the bronchoalveolar lavage fluid (BALF) analyses, inflammatory parameters were increased concentration-dependently in both sexes from 0.2 mg/m(3). Granulomatous changes in the lung were induced at 1 and 5 mg/m(3) in females and even at 0.2 mg/m(3) in males. Focal fibrosis of the alveolar wall was observed in both sexes at 1 mg/m(3) or higher. Inflammatory infiltration in the visceral pleural and subpleural areas was induced only at 5 mg/m(3). In conclusion, we determined 0.2 mg/m(3) as the low-observed-adverse-effect level (LOAEL) for respiratory tract toxicity in the present inhalation exposure study of rats.