RESUMO
In this study, some copper catalysts used for atom transfer radical polymerization (ATRP) were explored as efficient anti-tumor agents. The aqueous solution of copper-containing nanoparticles with uniform spheric morphology was in situ prepared through a copper-catalyzed activator generated by electron transfer (AGET) ATRP in water. Nanoparticles were then directly injected into tumor-bearing mice for antitumor chemotherapy. The copper nanodrugs had prolonged blood circulation time and enhanced accumulation at tumor sites, thus showing potent antitumor activity. This work provides a novel strategy for precise and large-scale preparation of copper nanodrugs with high antitumor activity.
Assuntos
Antineoplásicos , Cobre , Polimerização , Cobre/química , Animais , Camundongos , Antineoplásicos/química , Antineoplásicos/farmacologia , Humanos , Catálise , Nanopartículas Metálicas/química , Linhagem Celular Tumoral , Radicais Livres/química , Nanopartículas/químicaRESUMO
To investigate the utility of acrylic monomers from various plant oils in adhesives manufacturing, 25-45 wt. % of high oleic soybean oil-based monomer (HOSBM) was copolymerized in a miniemulsion with commercially applied butyl acrylate (BA), methyl methacrylate (MMA), or styrene (St). The compositions of the resulting ternary latex copolymers were varied in terms of both "soft" (HOSBM, BA) and "rigid" (MMA or St) macromolecular fragments, while total monomer conversion and molecular weight of copolymers were determined after synthesis. For most latexes, results indicated the presence of lower and higher molecular weight fractions, which is beneficial for the material adhesive performance. To correlate surface properties and adhesive performance of HOSBM-based copolymer latexes, contact angle hysteresis (using water as a contact liquid) for each latex-substrate pair was first determined. The data showed that plant oil-based latexes exhibit a clear ability to spread and adhere once applied on the surface of materials differing by polarities, such as semicrystalline polyethylene terephthalate (PET), polypropylene (PP), bleached paperboard (uncoated), and tops coated with a clay mineral paperboard. The effectiveness of plant oil-based ternary latexes as adhesives was demonstrated on PET to PP and coated to uncoated paperboard substrates. As a result, the latexes with high biobased content developed in this study provide promising adhesive performance, causing substrate failure instead of cohesive/adhesive break in many experiments.
Assuntos
Adesivos , Látex , Adesivos/química , Látex/química , Metilmetacrilato , Óleos de Plantas , Polímeros/química , Óleo de Soja , EstirenoRESUMO
Poly(n-butyl methacrylate) (PnBMA)/reduced graphene oxide (rGO) nanocomposite films are prepared using two different routes. The first route involves preparation of PnBMA nanoparticles containing homogeneously dispersed rGO nanosheets by miniemulsion polymerization using a block copolymer of ionic liquid (IL) monomer and nBMA. The IL units act as adsorption sites for rGO whereas BMA units provide solubility in the BMA monomer droplets. Nanocomposite films obtained from miniemulsion polymerization exhibit higher tensile modulus in comparison with the films prepared by mixing a PnBMA emulsion and aqueous graphene oxide (GO) dispersion. The second route involves preparation of PnBMA particles armored with rGO nanosheets via miniemulsion polymerization using the same poly(ionic liquid) (PIL) block copolymer. An anionic exchange reaction is conducted to obtain more hydrophilic PIL units in the block copolymer, thus providing adsorption sites of GO nanosheets at the interface of the polymer particles. Subsequent chemical reduction of GO to rGO using hydrazine monohydrate results in formation of a PnBMA/rGO nanocomposite. The resulting nanocomposite film exhibits electrical conductivity (2.0 × 10-3 S m-1).
Assuntos
Líquidos Iônicos , Nanocompostos , Grafite , Metacrilatos , Polimerização , PolímerosRESUMO
Halogen exchange in atom transfer radical polymerization (ATRP) is an efficient way to chain-extend from a less active macroinitiator (MI) to a more active monomer. This has been previously achieved by using CuCl/L in the equimolar amount to Pn -Br MI in the chain extension step. However, this approach cannot be effectively applied in systems based on regeneration of activators (ARGET ATRP), since they operate with ppm amounts of catalysts. Herein, a catalytic halogen exchange procedure is reported using a catalytic amount of Cu in miniemulsion ARGET ATRP to chain-extend from a less active poly(n-butyl acrylate) (PBA) MI to a more active methyl methacrylate (MMA) monomer. Influence of different reagents on the initiation efficiency and dispersity is studied. Addition of 0.1 m NaCl or tetraethylammonium chloride to ATRP of MMA initiated by methyl 2-bromopropionate leads to high initiation efficiency and polymers with low dispersity. The optimized conditions are then employed in chain extension of PBA MI with MMA to prepare diblock and triblock copolymers.
Assuntos
Halogênios , Polímeros , Catálise , PolimerizaçãoRESUMO
In this work, the free lipase Eversa® Transform 2.0 was used as a catalyst for enzymatic glycerolysis reaction in a solvent-free system. The product was evaluated by nuclear magnetic resonance (1H NMR) and showed high conversion related to hydroxyl groups. In sequence, the product of the glycerolysis was used as stabilizer and biopolyol for the synthesis of poly(urea-urethane) nanoparticles (PUU NPs) aqueous dispersion by the miniemulsion polymerization technique, without the use of a further surfactant in the system. Reactions resulted in stable dispersions of PUU NPs with an average diameter of 190 nm. After, the formation of the PUU NPs in the presence of concentrated lipase Eversa® Transform 2.0 was studied, aiming the lipase immobilization on the NP surface, and a stable enzymatic derivative with diameters around 231 nm was obtained. The hydrolytic enzymatic activity was determined using ρ-nitrophenyl palmitate (ρ-NPP) and the immobilization was confirmed by morphological analysis using transmission electron microscopy and fluorescence microscopy.
Assuntos
Enzimas Imobilizadas/imunologia , Glicerol/química , Lipase/metabolismo , Polímeros/química , Poliuretanos/química , Microscopia Eletrônica de Transmissão , Sonicação , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
The current paucity of effective and affordable drugs for the treatment of leishmaniasis renders the search for new therapeutic alternatives a priority. Gallic acid-related compounds display anti-parasitic activities and their incorporation into drug carrier systems, such as polymeric nanoparticles may be a viable alternative for leishmaniasis treatment. Therefore, this study focused on the synthesis and characterization of octyl gallate (G8) loaded poly(methyl methacrylate) (PMMA) nanoparticles via miniemulsion polymerization in order to increase the leishmanicidal activity of this compound. G8 loaded PMMA nanoparticles presented a spherical morphology with a mean size of 108 nm, a negatively charged surface (-33 ± 5 mV) and high encapsulation efficiency (83% ± 5). Fourier-transform infrared spectroscopy and X-ray diffraction analysis confirmed that G8 was encapsulated in PMMA nanoparticles and presented a biphasic release profile. The G8 loaded PMMA nanoparticles did not present cytotoxic effect on human red blood cells. G8 loaded PMMA nanoparticles displayed a leishmanicidal activity almost three times higher than free G8 while the cytotoxic activity against human THP-1 cells remained unchanged.
Assuntos
Portadores de Fármacos/química , Ácido Gálico/análogos & derivados , Leishmania/efeitos dos fármacos , Polimetil Metacrilato/química , Tripanossomicidas/administração & dosagem , Tripanossomicidas/farmacologia , Células CACO-2 , Linhagem Celular , Liberação Controlada de Fármacos , Emulsões/química , Ácido Gálico/administração & dosagem , Ácido Gálico/química , Ácido Gálico/farmacologia , Hemólise/efeitos dos fármacos , Humanos , Leishmaniose/tratamento farmacológico , Nanopartículas/química , Nanopartículas/ultraestrutura , Tripanossomicidas/químicaRESUMO
Facile and scalable fabrication methods are attractive to prepare materials for diverse applications. Herein, a method is presented to prepare cross-linked polymeric nanoparticles with graphene oxide (GO) nanosheets covalently attached to the surface. Alkene-modified GO serves as a surfactant in a miniemulsion polymerization, and the alkene functionalities of GO exposed to the oil-phase are incorporated into the polymer particle through thiol-ene reactions, leaving the unreacted alkene functional groups of the other face of GO available for further functionalization. The surface of GO-armored polymer particles is then modified with a small molecule fluorophore or carboxylic acid functional groups that bind to Fe2 O3 and TiO2 nanoparticles. This methodology provides a facile route to preparing complex hybrid composite materials.
Assuntos
Compostos Férricos/química , Grafite/química , Nanopartículas de Magnetita/química , Polímeros/química , Titânio/químicaRESUMO
Colloidal quantum dots are well-established probes for quantum optical experiments. However, they possess a limited stability toward their environment. Herein, the generation of hybrid particles composed of a high optical quality quantum dot centered in a polymer particle by means of a miniemulsion polymerization procedure is reported. This embedding strongly enhances emission intensity and photochemical stability of these single-photon emitters. At the same time, their colloidal mobile nature is not compromised.
Assuntos
Compostos de Cádmio/química , Fótons , Polimetil Metacrilato/química , Pontos Quânticos , Selênio/química , Emulsões , Luz , Processos FotoquímicosRESUMO
In this article, a new system employing an ultrasonic microreactor coupled with a tubular reactor is presented for the continuous generation of polymer nanoparticles. The continuous generation of cross-linked polymer nanoparticles utilizing the monomer butyl methacrylate and the cross-linker ethylene glycol dimethacrylate is demonstrated. Firstly, the miniemulsion polymerization of a monomer-in-water miniemulsion is studied in a batch system. Secondly, a coiled tubular reactor is employed for the continuous polymerization of the miniemulsion generated by an ultrasonic microreactor. Finally, the influence of monomer volume fraction and surfactant concentration on the synthesized polymer nanoparticles is studied. Polymer particles in a size range of 50-250 nm are synthesized and a high polymerization conversion is achieved utilizing the system demonstrated in this article.
RESUMO
Discoloration of wood coatings due to fungal growth negatively affects the aesthetic properties of the coatings, and new ways to control fungal growth on coatings are needed. For this reason, silver nanoparticles (AgNPs) have been incorporated in acrylic latexes as antifungal agents. Using miniemulsion polymerization, latexes were prepared with two types of initiators (hydrophilic and hydrophobic) to assess the influence of the initiator type on AgNPs dispersion, both within the latex particles and the dry film. In addition, the impact of NP dispersion on resistance to black-stain fungi (Aureobasidium pullulans) was also evaluated. Inductively coupled plasma optical emission spectroscopy (ICP-OES) analysis indicates that acrylic latexes prepared with azobisisobutyronitrile (AIBN) as the initiator contain more AgNPs than those prepared with potassium persulfate (KPS). Cryo-TEM and SEM analyses show that the distribution of the AgNPs within the polymer particles is influenced by the nature of the initiator. When AIBN, a hydrophobic initiator, is used, the AgNPs appear to be closer to the surface of the polymer particles and more evenly distributed. However, the antifungal efficiency of the AgNPs-embedded latexes against A. pullulans is found to be higher when KPS is used, despite this initiator leading to a smaller amount of incorporated AgNPs and a less uniform dispersion of the nanoparticles.
RESUMO
This work focuses on the encapsulation of two organic phase change materials (PCMs), hexadecane and octadecane, through the formation of nanocapsules of the conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) obtained by oxidative polymerization in miniemulsion. The energy storage capacity of nanoparticles is studied by preparing polymer films on supporting substrates. The results indicate that the prepared systems can store and later release thermal energy in the form of latent heat efficiently, which is of vital importance to increase the efficiency of future thermoelectric devices.
RESUMO
HYPOTHESIS: Conventional synthesis methods of polymeric nanoparticles as drug delivery systems are based on the use of large amounts of organic solvents, hence requiring several steps for the obtaining of waterborne dispersions. In view of the need for new environmentally friendly methods, emulsion polymerization and their related techniques are a good alternative for the production of monodispersed waterborne dispersions of biodegradable nanoparticles in a cleaner, reproducible and faster manner. EXPERIMENTS: Herein, the miniemulsion polymerization technique at low temperature using poly(2-ethyl-2-oxazoline) as surfactant has been developed for poly(hydroxyethyl methacrylate-lactic acid) and poly(hydroxyethyl methacrylate-lactic-co-glycolic acid) nanoparticles. Additionally, the anti-inflammatory drug BRP-187 was used to proof the potential of this technique in the encapsulation of hydrophobic drugs. The effect of the oligomer composition on the miniemulsion and the final dispersion stability, the final oligomer conversion, the polymer particle size and the drug encapsulation efficiency has been studied. FINDINGS: Monodisperse spherical particles ranging between 170 and 250 nm in diameter in long term non-toxic stable waterborne dispersions were obtained with drug encapsulation efficiencies up to 66%. In contrast with conventional synthesis techniques, residual organic solvents are completely removed and, thus, the potential of redox initiated miniemulsion polymerization to obtain stable drug loaded poly(hydroxyethyl methacrylate-lactic acid) and poly(hydroxyethyl methacrylate-lactic-co-glycolic acid) nanoparticles in an efficient and fast manner is shown.
Assuntos
Nanopartículas , Anti-Inflamatórios , Emulsões , Tamanho da Partícula , Poliésteres , Polimerização , TemperaturaRESUMO
Fluorescent polymer nanomaterials with dynamic fluorescence properties hold great potential in many advanced applications, including but not limited to information encryption, adaptive camouflage, and biosensors. The key to improving the application value of materials is to establish an accurate control strategy for dynamic fluorescence behavior. Herein, we develop a core-shell engineering strategy to precisely and independently manipulate the dynamic fluorescence behavior through the shell polymeric matrix. The core-shell fluorescent polymer nanoparticles (CS-FPNPs) are constructed through a sequential process of miniemulsion polymerization and seeded emulsion polymerization. Taking advantage of the core-shell structure, the rigid core matrix ensures the strong initial emission of AIE units, while the photoisomerization behavior of spiropyrane (SP) units is delicately and independently regulated by the rigidness of the shell matrix. Thereby, CS-FPNPs exhibit bright time-dependent reversible dynamic fluorescence behavior under alternating UV/vis irradiation. Benefited from the excellent processability and film formation ability, we have successfully applied CS-FPNPs to dynamic decorative painting, warning labels, and dynamic QR code security. Impressively, the fluorescence manipulation strategy based on core-shell engineering allows the independent regulation of specific luminescent units in complicated emission systems to accurately embody designed emission behavior.
RESUMO
Large amounts of food are wasted during the food supply chain. This loss is in part due to consumer confusion over dates on food packages that can indicate a variety of quality indicators in the product (e.g., expiration date, "best by" date, "sell by" dates, etc.). To reduce this food loss, much research has been focused on the films that offer simple and easily manipulated indication systems to detect food spoilage. However, these materials are usually hydrophilic biopolymers that can detect the food spoilage in a wide pH range but do not provide highly sensitive real-time measurements. In this work, a glycerol-based nanocomposite core-shell latex film was synthesized to create a responsive packaging material that can provide real-time pH detection of food with high sensitivity. First, the pH-responsive dendrimer comonomer was synthesized from glycerol and diamine. Then, the nanoencapsulation polymerization process via miniemulsion was conducted to form a core-shell structure with tunable nanoshell thickness for a sensible pH-responsive release (<0.5 pH change). Next, the flexible film encapsulated a color-indicative dye that provided highly sensitive and visible color changes as both the pH dropped and the time elapsed in the food. This film also provided a barrier to water and heat and resisted deformation. Ultimately, this nanocomposite flexible film pending a pH sensor has the potential as an intelligent food packaging material for a universal, accurate, easy-to-use, and real-time food spoilage monitoring system to reduce food waste.
Assuntos
Dendrímeros/química , Embalagem de Alimentos , Glicerol/química , Nanocompostos/química , Concentração de Íons de Hidrogênio , Eliminação de ResíduosRESUMO
The conversion of cornstalk lignin derived from the co-product of bio-refinery into value-added products such as polymeric material has remarkable environmental and economic potential. A novel bio-based methyl methacrylate copolymerized with butyl acrylate (MMA-co-BA) hybrid resin in our research was prepared by the reversible addition-fragmentation chain transfer method using lignin-graft-polyacrylamide (lignin-g-PAM) as a bio-derived macromolecular chain transfer agent. The molecular architecture of lignin-g-PAM and the lignin-based MMA-co-BA hybrid resin was elucidated using 1H nuclear magnetic resonance and attenuated total reflectance-Fourier transform infrared. The thermal behavior and mechanical performance of the resultant lignin-based MMA-co-BA hybrid resins were also investigated through thermogravimetric analysis, differential scanning calorimetry, and a stress-strain test, respectively. The lignin-based acrylate resins system exhibited structure-related thermal and mechanical properties. Compared with pure MMA-co-BA resin, the incorporation of lignin into various lignin-based MMA-co-BA graft copolymers resulted in an improved tensile strength and a higher Young's modulus. This research could provide not only a new avenue to utilize waste biomass for high-value applications, but also a reference for designing new materials for coatings or adhesives.
RESUMO
Cationic polymers have garnered significant interest for their utility in intracellular drug delivery and gene therapy. However, due to their associated toxicities, novel synthesis approaches must be explored to develop materials that are biocompatible. The novel library of nanoparticles synthesized in this study exhibit tunable hydrodynamic diameters, composition and pH-responsive properties as a function of synthesis parameters. In addition, differences in the responsiveness of these nanoparticles under different pH conditions affords greater control over intracellular drug release.
Assuntos
Portadores de Fármacos , Nanogéis , Polímeros/química , Cátions , Reagentes de Ligações Cruzadas/química , Preparações de Ação Retardada , Composição de Medicamentos , Hidrodinâmica , Concentração de Íons de Hidrogênio , Polímeros/toxicidadeRESUMO
AB diblock waterborne copolymers made of styrene (St) and 2-ethylhexyl acrylate (2EHA) were synthesized by means of two-step reversible addition fragmentation chain transfer (RAFT) (mini)emulsion polymerization. Monofunctional asymmetric RAFT agent was used to initiate the polymerization. The hard polystyrene "A" block was synthesized via miniemulsion polymerization followed by 2EHA pre-emulsion feeding to form the soft "B" block. Polymerization kinetics and the evolution of the molecular weight distribution were followed during synthesis of both initial and final block copolymers. DSC measurements of the block copolymers revealed the existence of two glass transition temperatures (Tgs) and thus the occurrence of two-phase systems. Microscopic techniques (atomic force microscopy (AFM) and transmission electron microscopy (TEM)) were used to study the phase separation within the particles in the latex form, after film formation at room temperature cast directly from the latex and after different post-treatments well above the Tg of the hard-polystyrene domains, when complete particle coalescence had occurred. The morphological differences observed after different annealing temperatures were correlated with the mechanical properties analyzed by DMTA measurements. Finally, the differences found in the mechanical properties of the block copolymers annealed at different temperatures were correlated to their heat seal application results.
RESUMO
Liquid crystal nanocapsules (LC-Nanocapsules) were prepared by miniemulsion polymerization of the oil-in-water emulsion monomer droplets dissolving the liquid crystal (LC) compounds. In order to establish the preparation conditions of LC-Nanocapsules exhibiting the liquid crystallinity, the effects of the capsule wall-forming monomers and the crosslinking agent concentration on the capsule structure were investigated in detail. The monodisperse colloidal products covered with the robust polymer shell wall was successfully prepared by the polymerization of the emulsion monomer droplets obtained through the phase inversion temperature emulsification technique using the amphiphilic block copolymer as an emulsifier. The endothermic peak was observed at the nematic-isotropic phase transition temperature (TNI) of the LC in the differential scanning calorimetry diagram of LC-Nanocapsules. The bright- and dark-field images of the dried thin films of LC-Nanocapsules spread on a glass substrate were found to appear repeatedly by the temperature change below and above TNI by polarized optical microscopic analysis. These results revealed that the LC-Nanocapsules with a complete engulfing morphology were successfully formed by the spontaneous coacervation phenomena between the crosslinked polymer and the LC with a progression of the polymerization, as theoretically predicted from the viewpoint of the spreading coefficients.
RESUMO
Hollow magnetic polymeric particles (HoMPs) with controllable location of magnetic nanoparticles and functionality of polymeric double shell were fabricated by means of the facile soft templating method in one-pot. During the in situ miniemulsion polymerization, hexadecane, the Ostwald suppressing agent, acted as a soft template, which later formed a controllable void size. Adjusting ratio and polarity of monomers caused the difference in polymerization kinetics and phase separation, which resulted in HoMPs with two internal architectures, i.e., HoMPs-I with magnetic at the inner shell/void interface and HoMPs-II with magnetic-embedded shell. Both HoMPs-I and II contained high magnetic content (30-50%wt) with sufficient saturation magnetization (16-30â¯emu/g). With large void volume (>50%) and distinct shell polarity, either hydrophilic Rhodamine B or hydrophobic fluorescein isothiocyanate dye was selectively loaded. After functionalization with a cancer cell targeting ligand, folic acid (FA), the cellular uptake of HoMPs-FA in HeLa cell was improved with 100% cell viability and without cell destruction. This fabrication method provides a facile mean to tailor surface chemistry and architectures of hollow hybrid particles, which would be potentially used for efficient treatment of cancer tumors.
Assuntos
Nanopartículas de Magnetita/química , Polímeros/química , Células HeLa , Humanos , Fenômenos Magnéticos , Imagem Óptica , Tamanho da Partícula , Polímeros/síntese química , Porosidade , Propriedades de SuperfícieRESUMO
Polyphosphate salts, such as sodium hexametaphosphate (PPi), are effective in the attenuation of collagenase and biofilm production and prevention of anastomotic leak in mice models. However, systemic administration of polyphosphate solutions to the gut presents a series of difficulties such as uncontrolled delivery to target and off-site tissues. In this article a process to produce PPi-loaded poly(ethylene glycol) diacrylate (PEGDA) hydrogel nanoparticles through miniemulsion polymerization is developed. The effects of using a polyphosphate salt, as compared to a monophosphate salt, is investigated through cloud point measurements, which is then translated to a change in the required HLB of the miniemulsion system. A parametric study is developed and yields a way to control particle swelling ratio and mean diameter based on the surfactant and/or initiator concentration, among other parameters. Finally, release kinetics of two different crosslink density particles shows a sustained and tunable release of the encapsulated polyphosphate.