Malachite green (cationic dye) removal with modified Pinus brutia biochar.

Dyes are frequently used in industries such as textile, leather, paper and printing, to water sources causes harmful effects on the environment and human health. Therefore, it is crucial to effectively remove colored contaminants from water in order to protect the environment and public health, maintain biodiversity and preserve the esthetic aspects of water resources. In this study, wood chips obtained from Pinus brutia (PB) tree grown in many parts of the world were turned into biochar and then modified and used for the removal of malachite green, a cationic dye. For this purpose, biochar (PBB) was made by collecting PB wood and turning it into chips (PB). Later, PBB was modified to gain nano-magnetic properties. The structure of the obtained PBB and nM-PBB adsorbents was characterized by FT-IR. pH (2-9), temperature (25 °C-55 °C), time change (15 min-240 min), adsorbent amount change (0.05 g-0.45g) and MG concentration (25 mg/L-250 mg/L) were investigated in MG removal of PBB and nM-PBB. The process was found to be pseudo-second-order and spontaneous endothermic reaction. PBB and nM-PBB were found to be suitable for Langmuir isotherm in MG removal (qmax=13.004 mg/g for PBB, qmax=18.215 mg/g for nM-PBB).

Various adsorbents are used to remove different substances from water. The use of pinus brutia tree, which is a biochar product, in the removal of malachite green dyes from aqueous solutions has not been found in the literature. The findings revealed that Pinus brutia could be used to extract malachite green, a cationic dyestuff. Pinus brutia is a widely distributed, easy-to-access, low-cost species with many uses. Our study, in which Pinus brutian is used as an adsorbent, will contribute to the literature in this respect, and its use in the removal of different anionic and cationic dyes will be discussed in the future.

Human Cell-Camouflaged Nanomagnetic Scavengers Restore Immune Homeostasis in a Rodent Model with Bacteremia.

Bloodstream infection caused by antimicrobial resistance pathogens is a global concern because it is difficult to treat with conventional therapy. Here, scavenger magnetic nanoparticles enveloped by nanovesicles derived from blood cells (MNVs) are reported, which magnetically eradicate an extreme range of pathogens in an extracorporeal circuit. It is quantitatively revealed that glycophorin A and complement receptor (CR) 1 on red blood cell (RBC)-MNVs predominantly capture human fecal bacteria, carbapenem-resistant (CR) Escherichia  coli, and extended-spectrum beta-lactamases-positive (ESBL-positive) E. coli, vancomycin-intermediate Staphylococcus aureus (VISA), endotoxins, and proinflammatory cytokines in human blood. Additionally, CR3 and CR1 on white blood cell-MNVs mainly contribute to depleting the virus envelope proteins of Zika, SARS-CoV-2, and their variants in human blood. Supplementing opsonins into the blood significantly augments the pathogen removal efficiency due to its combinatorial interactions between pathogens and CR1 and CR3 on MNVs. The extracorporeal blood cleansing enables full recovery of lethally infected rodent animals within 7 days by treating them twice in series. It is also validated that parameters reflecting immune homeostasis, such as blood cell counts, cytokine levels, and transcriptomics changes, are restored in blood of the fatally infected rats after treatment.

Decolorization of water through removal of methylene blue and malachite green on biodegradable magnetic Bauhinia variagata fruits.

Batch sorption experiments were performed to investigate the potential of Bauhinia variagata fruit (BVf) and nano-magnetic Bauhinia variagata fruit (nM-BVf) to remove methylene blue (MB) and malachite green (MG). Equilibrium studies have been carried out using various experimental parameters such as the amount of biosorbent, initial solution concentration, contact time, pH, and temperature. The Langmuir, Freundlich, Scatchard, D-R and Temkin adsorption models were applied for the experimental information of MB and MG. The Freundlich model fits better than the Langmuir model. Freundlich model confirmed the magnificent dye sorption ability; 19.3 mg/g for BVf/MB, 21.2 mg/g for nM-BVf/MB, 19.7 mg/g for BVf/MG, and 30.1 mg/g for nM-BVf/MG. The pseudo-second-order kinetic model displayed a more suitable behavior to the experimental result for the removal of MG and MB. Thermodynamic parameters such as changes in Gibbs free energy (ΔGo), enthalpy (ΔHo), and entropy (ΔSo) were investigated and the fine details in the adsorption system were completed. The conclusion from this study is that the prepared nano biosorbent can be efficient for the removal of cationic dyes from wastewater.

Immobilization of Wnt Fragment Peptides on Magnetic Nanoparticles or Synthetic Surfaces Regulate Wnt Signaling Kinetics.

Wnt signaling plays an important role in embryogenesis and adult stem cell homeostasis. Its diminished activation is implicated in osteoporosis and degenerative neural diseases. However, systematic administration of Wnt-signaling agonists carries risk, as aberrantly activated Wnt/ß-catenin signaling is linked to cancer. Therefore, technologies for local modulation and control of Wnt signaling targeted to specific sites of disease or degeneration have potential therapeutic value in the treatment of degenerative diseases. We reported a facile approach to locally activate the canonical Wnt signaling cascade using nanomagnetic actuation or ligand immobilized platforms. Using a human embryonic kidney (HEK293) Luc-TCF/LEF reporter cell line, we demonstrated that targeting the cell membrane Wnt receptor, Frizzled 2, with peptide-tagged magnetic nanoparticles (MNPs) triggered canonical Wnt signaling transduction when exposed to a high-gradient, time-varying magnetic field, and the induced TCF/LEF signal transduction was shown to be avidity-dependent. We also demonstrated that the peptide retained signaling activity after functionalization onto glass surfaces, providing a versatile platform for drug discovery or recreation of the cell niche. In conclusion, these results showed that peptide-mediated Wnt signaling kinetics depended not only on ligand concentration but also on the presentation method of the ligand, which may be further modulated by magnetic actuation. This has important implications when designing future therapeutic platforms involving Wnt mimetics.

Synthesis of an organic-inorganic hybrid absorbent for in-tube solid-phase microextraction of bisphenol A.

This research is an application of fiber-in-tube solid-phase microextraction followed by high-performance liquid chromatography with UV detection for the extraction and determination of trace amounts of bisphenol A. Nanomagnetic Fe3 O4 was formed on the surface of polypropylene porous hollow fibers to increase the surface area and then it was coated with polystyrene. The introduction of polystyrene improves the surface hydrophobicity and is an appropriate extractive phase because it is highly stable in aquatic media. The extraction was carried out in a short capillary packed longitudinally with the fine fibers as the extraction medium. Extraction conditions, including extraction and desorption flow rates, extraction time, pH, and ionic strength of the sample solution, were investigated and optimized. Under optimal conditions, the limit of detection was 0.01 µg/L. This method showed good linearity for bisphenol A in the range of 0.033-1000 µg/L, with the coefficient of determination of 0.9984. The inter- and intraday precisions (RSD%, n = 3) were 7.9 and 6.3%, respectively. Finally, the method was applied to analysis of the analyte in thermal papers, disposable plastic cups, and soft drink bottles.

Role of Micromagnetic States on Spin-Orbit Torque-Switching Schemes.

Three-terminal spintronic memory devices based on the controlled manipulation of the proximate magnetization of a magnetic nanoelement using spin-orbit torques (SOTs) have attracted growing interest recently. These devices are nonvolatile, can operate at high speeds with low error rates, and have essentially infinite endurance, making them promising candidates for high-speed cache memory. Typically, the magnetization and spin polarization in these devices are collinear to one another, leading to a finite incubation time associated with the switching process. While switching can also be achieved when the magnetization easy axis and spin polarization are noncollinear, this requires the application of an external magnetic field for deterministic switching. Here, we demonstrate a novel SOT scheme that exploits non-uniform micromagnetic states to achieve deterministic switching when the spin polarization and magnetic moment axis are noncollinear to one another in the absence of external magnetic field. We also explore the use of a highly efficient SOT generator, oxygen-doped tungsten in the three-terminal device geometry, confirming its -50% spin Hall angle. Lastly, we illustrate how this scheme may potentially be useful for nanomagnetic logic applications.

Experimental Clocking of Nanomagnets with Strain for Ultralow Power Boolean Logic.

Nanomagnetic implementations of Boolean logic have attracted attention because of their nonvolatility and the potential for unprecedented overall energy-efficiency. Unfortunately, the large dissipative losses that occur when nanomagnets are switched with a magnetic field or spin-transfer-torque severely compromise the energy-efficiency. Recently, there have been experimental reports of utilizing the Spin Hall effect for switching magnets, and theoretical proposals for strain induced switching of single-domain magnetostrictive nanomagnets, that might reduce the dissipative losses significantly. Here, we experimentally demonstrate, for the first time that strain-induced switching of single-domain magnetostrictive nanomagnets of lateral dimensions ∼200 nm fabricated on a piezoelectric substrate can implement a nanomagnetic Boolean NOT gate and steer bit information unidirectionally in dipole-coupled nanomagnet chains. On the basis of the experimental results with bulk PMN-PT substrates, we estimate that the energy dissipation for logic operations in a reasonably scaled system using thin films will be a mere ∼1 aJ/bit.

Nanomagnetic levitation three-dimensional cultures of breast and colorectal cancers.

BACKGROUND: Innovative technologies for drug discovery and development, cancer models, stem cell research, tissue engineering, and drug testing in various cell-based platforms require an application similar to the in vivo system. MATERIALS AND METHODS: We developed for the first time nanomagnetically levitated three-dimensional (3-D) cultures of breast cancer (BC) and colorectal cancer (CRC) cells using carbon-encapsulated cobalt magnetic nanoparticles. BC and CRC xenografts grown in severe combined immunodeficient (SCID) mice were evaluated for N-cadherin and epidermal growth factor receptor expressions. These phenotypes were compared with two-dimensional and 3-D cultures grown in a gel matrix. RESULTS: The BC and CRC cells grown by magnetic levitation formed microtissues. The levitated cultures had high viability and were maintained in culture for long periods of time. It has been observed that N-cadherin and epidermal growth factor receptor activities were highly expressed in the levitated 3-D tumor spheres and xenografts of CRC and BC cells. CONCLUSIONS: Nanomagnetically levitated 3-D cultures tend to form stable microtissues of BC and CRC and maybe more feasible for a range of applications in drug discovery or regenerative medicine.

Synthesis of biodegradable sodium alginate-based carbon dot-nanomagnetic composite (SA-FOCD) for enhanced water remediation using ANN modelling, RSM optimization, and economic analysis.

This study involves the synthesis of a magnetic­sodium alginate bio-composite embedded with carbon dots, designed to eliminate pollutants like dyes and metal ions and tackle environmental issues. The modified particles are effectively incorporated into the biopolymers for improved adsorption and regeneration performance using an economically viable and environmentally sustainable process. The composite's surface morphology and chemical structure have been extensively characterized through various analytical techniques. It has been found that CD-modified nanoparticles demonstrate good dispersion, abundance in functional groups, and excellent adsorption performance. The adsorption process variables have been optimized using Response Surface Methodology (RSM), resulting in a maximum adsorption capacity of 232.44 mg/g achieved under optimal conditions. An Artificial Neural Network (ANN) model with a topology of 3-5-5-1 is constructed to predict the adsorption capacity of composite, exhibiting superior predictive performance. The statistical physical model was also performed to understand the adsorption mechanism and orientation of dye molecules attached to the surface of the composite. The adsorption capacity using statistical physical method was found to be 467.57 mg/g. The composite exhibits good adsorption and regeneration performance in the column adsorption study. Furthermore, a detailed cost analysis of the synthesized composite was performed, ensuring its economic viability in real-world applications.

Comparison of efficacy and safety of different asparaginases in adult acute lymphoblastic leukemia based on nano-magnetic beads immunoassay.

OBJECTIVE: To compare the efficacy and safety of different asparaginase formulations in the treatment of acute lymphoblastic leukemia (ALL) based on nano-magnetic bead immunoassay. METHODS: Retrospective analysis of adult ALL patients' clinical data who admitted to The Affiliated Hospital of Changsha Health Vocational College from August 2020 to August 2023. Finally, 65 adult ALL patients were included in this study, including the polyethylene glycol conjugated asparaginase (PEG-ASNase) group (n = 32) and the L-asparaginase (L-ASNase) group (n = 33). Enzyme-linked immunosorbent assay (ELISA) based on magnetic nanoparticles was used to determine the activity of ASNase in both groups. The levels of asparagine or glutamine in two groups were detected by automatic biochemical analyzer during induction therapy, and the adverse events of the two groups were observed during the treatment. RESULTS: PEG-ASNase demonstrated a slower decrease in enzyme activity, longer action duration, and higher safety profile compared to L-ASNase. PEG-ASNase group and L-ASNase group demonstrated a similar complete remission rate (71.88% vs. 60.61%). Event-free survival was higher in patients receiving PEG-ASNase than those receiving L-ASNase (42.4% and 18.7%). The observed adverse reactions included allergic reactions, pancreatic lesions, gastrointestinal reactions and liver function damage. The incidence of gastrointestinal reactions and liver function damage was higher in the L-ASNase group than that in PEG-ASNase group (45.45% and 33.33%). CONCLUSION: This study provides valuable insights into the asparaginase treatments in clinical, highlighting the importance of PEG-ASNase for improving treatment protocols in adult ALL patients.

Modified nano magnetic Fe2O3-MgO as a high active multifunctional heterogeneous catalyst for environmentally beneficial carbon-carbon synthesis.

In this study, novel nanomagnetic catalysts, namely Fe2O3-MgO@choline formate (Ch. F.) and Fe2O3-MgO@choline cyanide (Ch. CN), were synthesized through immobilizing choline-based ion liquids to magnetic support via a simple and cost-effective methodology. FT-IR, TGA, FE-SEM, VSM, EDS, BET, and XRD techniques were employed to assess and characterize these organic-inorganic compounds. Following the successful preparation of nanoparticles, the catalysts were utilized in Knoevenagel and benzoin condensations. Fe2O3-MgO@Ch.F. exhibited exceptional activity in Knoevenagel condensation under solvent-free conditions at room temperature, achieving high yields (91-98%) in a short timeframe. Similarly, Fe2O3-MgO@Ch.CN demonstrated remarkable activity in benzoin condensation under environmentally friendly solvent conditions, yielding higher isolated yields (76-88%). Furthermore, these magnetically recyclable multifunctional catalysts displayed the ability to be reused up to five times without a significant loss in efficiency. Additionally, the heterogeneity of this nanocatalyst was investigated using the hot filtration technique. The findings indicated that the reaction primarily occurs via a heterogeneous pathway.

Stem cell-like circulating tumor cells identified by Pep@MNP and their clinical significance in pancreatic cancer metastasis.

Objective: The circulating tumor cells (CTCs) could be captured by the peptide functionalized magnetic nanoparticles (Pep@MNP) detection system in pancreatic ductal adenocarcinoma (PDAC). CTCs and the CXCR4 expression were detected to explore their clinical significance. The CXCR4+ CTCs, this is highly metastatic-prone stem cell-like subsets of CTCs (HM-CTCs), were found to be associated with the early recurrence and metastasis of PDAC. Methods: CTCs were captured by Pep@MNP. CTCs were identified via immunofluorescence with CD45, cytokeratin antibodies, and the CXCR4 positive CTCs were assigned to be HM-CTCs. Results: The over-expression of CXCR4 could promote the migration of pancreatic cancer cell in vitro and in vivo. In peripheral blood (PB), CTCs were detected positive in 79.0% of all patients (49/62, 9 (0-71)/2mL), among which 63.3% patients (31/49, 3 (0-23)/2mL) were HM-CTCs positive. In portal vein blood (PVB), CTCs were positive in 77.5% of patients (31/40, 10 (0-40)/2mL), and 67.7% of which (21/31, 4 (0-15)/2mL) were HM-CTCs positive CTCs enumeration could be used as diagnostic biomarker of pancreatic cancer (AUC = 0.862), and the combination of CTCs positive and CA19-9 increase shows improved diagnostic accuracy (AUC = 0.963). in addition, PVB HM-CTCs were more accurate to predict the early recurrence and liver metastasis than PB HM-CTCs (AUC 0.825 vs. 0.787 and 0.827 vs. 0.809, respectively). Conclusions: The CTCs identified by Pep@MNP detection system could be used as diagnostic and prognostic biomarkers of PDAC patients. We identified and defined the CXCR4 over-expressed CTC subpopulation as highly metastatic-prone CTCs, which was proved to identify patients who were prone to suffering from early recurrence and metastasis.

Sustainable Nanomagnetism: Investigating the Influence of Green Synthesis and pH on Iron Oxide Nanoparticles for Enhanced Biomedical Applications.

This study comprehensively analyzed green nanomagnetic iron oxide particles (GNMIOPs) synthesized using a green method, investigating their size, shape, crystallinity, aggregation, phase portions, stability, and magnetism. The influence of pH and washing solvents on the magnetic properties of the nanoparticles and their incorporation into PCL membranes was examined for biomedical applications. Polyphenols were utilized at different pH values (1.2, 7.5, and 12.5), with washing being performed using either ethanol or water. Characterization techniques, including XRD, SEM, TEM, FTIR, and VSM, were employed, along with evaluations of stability, magnetic properties, and antioxidant activity. The findings indicate that both pH levels and the washing process exert a substantial influence on several properties of NMIOPs. The particle sizes ranged from 6.6 to 23.5 nm, with the smallest size being observed for GNMIOPs prepared at pH 12.5. Higher pH values led to increased crystallinity, cubic Fe3O4 fractions, and reduced crystalline anisotropy. SEM and TEM analyses showed pH-dependent morphological variations, with increased aggregation being observed at lower pH values. GNMIOPs displayed exceptional magnetic behavior, with the highest saturation magnetization being observed in GNMIOPs prepared at pH 7.5 and 12.5 and subsequently washed with ethanol. The zeta potential measurements indicated a stability range for GNMIOPs spanning from -31.8 to -41.6 mV, while GNMIOPs synthesized under high-pH conditions demonstrated noteworthy antioxidant activity. Furthermore, it was explored how pH and washing solvent affected the morphology, roughness, and magnetic properties of GNMIOP-infused nanofiber membranes. SEM showed irregularities and roughness due to GNMIOPs, varying with pH and washing solvent. TEM confirmed better dispersion with ethanol washing. The magnetic response was stronger with ethanol-washed GNMIOPs, highlighting the influence of pH and washing solvent on membrane characteristics.

Elucidating Mechanotransduction Processes During Magnetomechanical Neuromodulation Mediated by Magnetic Nanodiscs.

Purpose: Noninvasive cell-type-specific manipulation of neural signaling is critical in basic neuroscience research and in developing therapies for neurological disorders. Magnetic nanotechnologies have emerged as non-invasive neuromodulation approaches with high spatiotemporal control. We recently developed a wireless force-induced neurostimulation platform utilizing micro-sized magnetic discs (MDs) and low-intensity alternating magnetic fields (AMFs). When targeted to the cell membrane, MDs AMFs-triggered mechanoactuation enhances specific cell membrane receptors resulting in cell depolarization. Although promising, it is critical to understand the role of mechanical forces in magnetomechanical neuromodulation and their transduction to molecular signals for its optimization and future translation. Methods: MDs are fabricated using top-down lithography techniques, functionalized with polymers and antibodies, and characterized for their physical properties. Primary cortical neurons co-cultured with MDs and transmembrane protein chemical inhibitors are subjected to 20 s pulses of weak AMFs (18 mT, 6 Hz). Calcium cell activity is recorded during AMFs stimulation. Results: Neuronal activity in primary rat cortical neurons is evoked by the AMFs-triggered actuation of targeted MDs. Ion channel chemical inhibition suggests that magnetomechanical neuromodulation results from MDs actuation on Piezo1 and TRPC1 mechanosensitive ion channels. The actuation mechanisms depend on MDs size, with cell membrane stretch and stress caused by the MDs torque being the most dominant. Conclusions: Magnetomechanical neuromodulation represents a tremendous potential since it fulfills the requirements of negligible heating (ΔT < 0.1 °C) and weak AMFs (< 100 Hz), which are limiting factors in the development of therapies and the design of clinical equipment. Supplementary Information: The online version contains supplementary material available at 10.1007/s12195-023-00786-8.

Modeling and simulation of smart magnetic self-assembled nanomicelle trajectories in an internal thoracic artery flow for breast cancer therapy.

Magnetic drug targeting (MDT) is one of the most modern techniques in cancer therapy for its ability to reduce the side effects of chemotherapy experienced by systemic drug administration. In this study, a comprehensive mathematical model has been developed to predict the drug particle trajectories of anticancer dasatinib magnetic nanomicelles (DAS-MNM) released in an internal thoracic artery (ITA) blood flow for breast cancer therapy using an external magnetic field. Several factors are investigated in regard to the efficiency of MDT through the ITA, including magnetic field strength (MFS), relative magnetic permeability, magnet size, drug particle size, and initial position of drug particle. The drug particle trajectory results confirmed the successful MDT using an external magnetic field with a capture efficiency of more than 90%. This was achieved by employing a wide range of particle sizes of DAS-MNM close to the external magnetic field source at the arterial wall than in other positions. Moreover, the results showed that the number of trapped particles increased with increasing both MFS and drug particle diameter within the target tissue, while the drug particle permeability did not have a considerable effect on the particle retention. In addition, for achieving a successful drug/cargo delivery through the arteries, the magnetic field, the particle size, and the initial release locations should be adjusted simultaneously. The present work offers insights into the critical factors in MDT with a significant impact on breast cancer therapy, tissue engineering, and regenerative medicine. Magnetic drug targeting model of anticancer dasatinib magnetic nanomicelles (DAS-MNM) released in an internal thoracic artery blood flow for breast cancer therapy.

Nano magnetic-based ELISA and nano magnetic-based latex agglutination test for diagnosis of experimental trichinellosis.

Human trichinellosis is a worldwide foodborne public health threat. Detecting circulating antigens of Trichinella spiralis "T. spiralis" allows for an early diagnosis before larval encystation develops in skeletal muscles. For the first time, the present study aimed to formulate an effective nanomagnetic beads based-ELISA and -latex agglutination test (NMB-ELISA and NMB-LAT) to recognize T. spiralis adult worm crude extract antigen (AWCEA) in sera of experimentally infected mice. The study included thirty-eight mice classified into 3 groups; T. spiralis-infected group (GI) which was euthanized 6, 8, 10, 12, 14 days post-infection (dpi), other parasitic infections group (GII) and healthy control group (GIII). Rabbit anti-T. spiralis polyclonal antibodies (pAbs) were utilized to detect AWCEA in serum samples by sandwich ELISA, NMB-ELISA, and NMB-LAT. Using NMB-ELISA, AWCEA was detected in sera collected at 6 and 8 dpi, with a sensitivity of 50% and 75%, respectively, and a specificity of 100%. Whereas, sandwich ELISA and NMB-LAT couldn't detect the antigen at the same time intervals. Both ELISA formats were able to detect the antigen in samples collected at 10, 12, and 14 dpi with a sensitivity of 100% for NMB-ELISA and 25%, 75%, and 100% respectively, for sandwich-ELISA. Yet, NMB-LAT couldn't detect AWCEA until 12 dpi with a sensitivity of 50% and specificity of 75%. In conclusion, NMB-ELISA is a promising sensitive tool for early and specific diagnosis of acute trichinellosis. The use of NMB-LAT could be a helpful screening procedure in field surveys.

Pillar Growth by Focused Electron Beam-Induced Deposition Using a Bimetallic Precursor as Model System: High-Energy Fragmentation vs. Low-Energy Decomposition.

Electron-induced fragmentation of the HFeCo3(CO)12 precursor allows direct-write fabrication of 3D nanostructures with metallic contents of up to >95 at %. While microstructure and composition determine the physical and functional properties of focused electron beam-induced deposits, they also provide fundamental insights into the decomposition process of precursors, as elaborated in this study based on EDX and TEM. The results provide solid information suggesting that different dominant fragmentation channels are active in single-spot growth processes for pillar formation. The use of the single source precursor provides a unique insight into high- and low-energy fragmentation channels being active in the same deposit formation process.

Additive Manufacturing of Co3Fe Nano-Probes for Magnetic Force Microscopy.

Magnetic force microscopy (MFM) is a powerful extension of atomic force microscopy (AFM), which mostly uses nano-probes with functional coatings for studying magnetic surface features. Although well established, additional layers inherently increase apex radii, which reduce lateral resolution and also contain the risk of delamination, rendering such nano-probes doubtful or even useless. To overcome these limitations, we now introduce the additive direct-write fabrication of magnetic nano-cones via focused electron beam-induced deposition (FEBID) using an HCo3Fe(CO)12 precursor. The study first identifies a proper 3D design, confines the most relevant process parameters by means of primary electron energy and beam currents, and evaluates post-growth procedures as well. That way, highly crystalline nano-tips with minimal surface contamination and apex radii in the sub-15 nm regime are fabricated and benchmarked against commercial products. The results not only reveal a very high performance during MFM operation but in particular demonstrate virtually loss-free behavior after almost 8 h of continuous operation, thanks to the all-metal character. Even after more than 12 months of storage in ambient conditions, no performance loss is observed, which underlines the high overall performance of the here-introduced FEBID-based Co3Fe MFM nano-probes.

The study of Fe3O4@SiO2-NH2 nano-magnetic composite modified by glutaraldehyde to immobilized penicillin G acylase.

Preparation of biocatalyst dependent on immobilized penicillin G acylase (PGA) was of substantial importance for proteomic research, organic synthesis, and industrial applications. Herein, we developed an easy method for nano-magnetic composite to immobilize PGA. Fe3O4 nano-magnetic particles were co-precipitated with Fe3+ and Fe2+ in an ammonia solution (NH3) and treated with silicon dioxide (SiO2), which was developed using the sol-gel process. Thereafter, 3-aminopropyltriethoxysilane (APTES) was used to modify the silica-coated Fe3O4, which would result in the attachment of the primary amine groups to the particle surface. After that, the attachment of primary amine group was reacted with glutaraldehyde (Glu) to immobilize PGA; the products related to each step were confirmed by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), vibration sample magnetometer (VSM), and scanning electron microscope-energy spectroscopy of dispersive x-rays (SEM-EDS). Condition investigation results revealed that the suitable pH value, reaction time, and immobilization temperature were 8.0, 6 h, and 40 °C, respectively, under optimal conditions. Enzyme loading capacity (ELC), enzyme activity (EA), and enzyme activity retention ratio (EAR) of PGA were 9198 U, 14602 U/g, and 87.7% respectively. Reusability findings showed that the immobilization PGA preserved 79% of its activity after 11 cycles of repeating.

Greener Syntheses of Coumarin Derivatives Using Magnetic Nanocatalysts: Recent Advances.

Coumarins (2H-1-benzopyran-2-ones) are an important group of biological heterocyclic compounds present in various parts of many plant species, encompassing an array of biological and pharmaceutical activities. In view of the importance of coumarins in heterocyclic chemistry and biological sciences and recent advances in the design of magnetic nanocatalysts, we present herein recent developments pertaining to their synthesis exclusively using magnetic nanoparticles, which can be retrieved easily and thus conform to the tenets of greener synthesis. The preparation of various types of coumarins such as Pechmann-based coumarins, bis coumarins, pyranocoumarins, and coumarin derivatives bearing amine moiety, linked to nicotinonitriles, N-coumarin-2-furanone, and pyrrole-linked chromene derivatives using nanocatalysts with a Fe3O4 core are described. This review covers the synthetic developments in the recent years 2012-2021 and focuses entirely on the synthesis of coumarins in the presence of magnetic nanocatalysts using greener approaches such as solvent-free conditions or deploying alternative activation methods, namely microwave or ultrasound irradiation.