Novel Digital Workflow for Nasoalveolar Molding and Postoperative Nasal Stent for Infants With Cleft Lip and Palate.

OBJECTIVE: We present a novel digital workflow to provide presurgical infant orthopedic (PSIO) treatment for a patient with a unilateral cleft lip/palate utilizing nasoalveolar molding (NAM) and a custom postsurgical nasal stent. SETTING: Within the US military healthcare system, the Joint Base San Antonio Craniofacial Anomalies Team utilizes dental scanners, predictive 3D modeling software, and 3D printing technology in a digital workflow for NAM appliance fabrication. WORKFLOW: Soft tissue facial scanning, peri-oral scanning, and dental putty impressions are used to facilitate fabrication and measure outcomes. Digital modeling software and 3D resin printing are utilized to manufacture the prescribed devices. MAIN OUTCOME MEASURES AND RESULTS: Extra-oral facial scans and intra-oral impressions are compared between 3 timepoints: pre-treatment, posttreatment with NAM, and postsurgical treatment. CONCLUSIONS: The ability to share workflows, establish outcome standards, and streamline patient care will continue to advance best practices in digital PSIO.

Assessment of Treatment Outcome of Presurgical Nasoalveolar Molding in Patients With Cleft Lip and Palate and Its Postsurgical Stability.

OBJECTIVE: To analyze the effects of presurgical nasoalveolar molding (PNAM) in newborns with cleft lip and palate and evaluate its postsurgical stability at 1-year follow-up using a nasal stent. DESIGN: Prospective clinical trial. SETTING: Department of Orthodontics, Maulana Azad Institute of Dental Sciences, Delhi. PATIENTS: Patients with cleft lip and palate of 0 to 6 months. Sample size 25 recruited, 16 satisfactorily completed the procedure. INTERVENTIONS: Presurgical nasoalveolar molding done as indicated in all the patients. Postsurgical external nasal stents were given for 1 year to maintain the nasal correction. MAIN OUTCOME MEASURES: Changes in cleft defect and maxillary arch were recorded pre- and post-PNAM. Changes in nasal morphological parameters assessed pre- and post-PNAM and 1 year after surgical repair following the use of nasal stent. RESULTS: There was a significant reduction in cleft defect assessed both intraorally ( 4.16 mm) and extra orally ( 4.42 mm) at the end of PNAM therapy (average treatment time 4 months). The nasal morphology improved with an increase in columella height (1.5 mm) and reduction in columella width. Bialar width reduced (2.90 mm) with an increase in nostril height ( 2.10 mm). Better symmetry was achieved in all cases as the nostril height and width difference changed significantly pre- and post-nasoalveolar molding. The percentage increase in columella height was greater for infants less than 6 weeks. CONCLUSIONS: Presurgical nasoalveolar molding considerably reduces the cleft gap and improves arch form making surgical union easier along with improved nasal morphology which can be maintained at 1-year postsurgery by use of a postsurgical external nasal stent.

A Complicated Case of Congenital Nasal Pyriform Aperture Stenosis: Use of a Long-term Unilateral Nasal Stent.

This case describes a full-term baby with pyriform aperture stenosis who failed intranasal dexamethasone and reflux therapy. She underwent repair via a sublabial approach and inferior turbinate reduction. Symptoms initially improved but she was unable to be weaned from intranasal steroids. Three subsequent surgeries ensued, including lysis of synechiae, further turbinate reduction, and placement of custom nasal stents, which failed as they became clogged frequently and were easily dislodged, leading to increased intranasal manipulation and postprocedural inflammation. She was eventually fitted and discharged with a large, unilateral stent. After 8 weeks, the stent was removed; she was tolerating full oral feeds. This case highlights the limitations of surgical repair and describes nontraditional uses of stenting.

Prosthetic management of post surgical nasal skin graft contracture.

The sequelae of trauma to the nose include nasal deformity and nasal obstruction that can have a long term negative impact on patient's quality of life. Successful management of posttraumatic nasal obstruction relies on a detailed history, careful analysis, and accurate diagnosis. Treatment must balance the seemingly disparate goals of re-establishing structure, improving contour and esthetics, as well as restoring the nasal airway. Indications and technical steps for fabricating bilateral nasal stents are presented, for a case of surgical opening of bilateral nasal synechia necessitated due to failed initial corrective surgery, post contracture and collapse of skin grafts. The objective of nasal stent was to maintain patency of nasal passage post surgical intervention. This is achieved by support to graft and residual tissues and prevention of mouth breathing. The nasal stents were modified post insertion at regular intervals to ensure adaptation to changes in mucosal lining of nasal.

Sinonasal Stent Coated with Sustained-Release Varnish of Mometasone Furoate Inhibits Pro-Inflammatory Cytokine Release from Macrophages: An In Vitro Study.

The aim of the study was to develop a sustained-release varnish (SRV) containing mometasone furoate (MMF) for sinonasal stents (SNS) to reduce mucosa inflammation in the sinonasal cavity. The SNS' segments coated with SRV-MMF or an SRV-placebo were incubated daily in a fresh DMEM at 37 °C for 20 days. The immunosuppressive activity of the collected DMEM supernatants was tested on the ability of mouse RAW 264.7 macrophages to secrete the cytokines' tumor necrosis factor α (TNFα) and interleukin (IL)-10 and IL-6 in response to lipopolysaccharide (LPS). The cytokine levels were determined by respective Enzyme-Linked Immunosorbent Assays (ELISAs). We found that the daily amount of MMF released from the coated SNS was sufficient to significantly inhibit LPS-induced IL-6 and IL-10 secretion from the macrophages up to days 14 and 17, respectively. SRV-MMF had, however, only a mild inhibitory effect on LPS-induced TNFα secretion as compared to the SRV-placebo-coated SNS. In conclusion, the coating of SNS with SRV-MMF provides a sustained delivery of MMF for at least 2 weeks, maintaining a level sufficient for inhibiting pro-inflammatory cytokine release. This technological platform is, therefore, expected to provide anti-inflammatory benefits during the postoperative healing period and may play a significant role in the future treatment of chronic rhinosinusitis.

Surgical Nasal Stent Fabrication Using Innovative Multisegmental Cast to Rehabilitate Anatomic and Functional Dynamicity of Upper Airway: A Case Report.

Aim: The purpose of this case report is to provide a simple, efficient, and novel technique for fabricating a nasal stent utilizing a multisegmental cast to rehabilitate the anatomic and functional dynamicity of the upper airway following primary cleft lip and primary rhinoplasty surgery. Background: Nasal deformity is often associated with congenital unilateral or bilateral cleft lip and palate. Despite primary nasal reconstruction at the time of definitive lip repair, the long-term postoperative outcome of the nasal correction frequently falls short of the surgeon's or patient's expectations. This condition is more prevalent in the Asian population due to undeveloped, thin alar cartilage and thick skin. Case description: A 4-month-old female infant was referred from the Department of Plastic Surgery for the fabrication of a nasal stent after surgical cleft lip repair with nasal reconstruction. A customized nasal stent using a multisegmental cast followed by relining with tissue conditioner was planned to minimize relapse of the nasal defect. Conclusion: The technique described in the present case for nasal stent fabrication is simple, cost-efficient and innovative. Postoperative use of this nasal stent helps to maintain the corrected position of the nose after primary lip and nasal correction, resulting in significantly improved esthetic results. Clinical significance: Nasal surgical correction deteriorates over time, especially within the 1st year of surgery due to tissue memory and contraction of the scar tissue. Hence a nasal stent should be worn after the surgery to maintain the corrected nasal form. How to cite this article: Singh S, Rathee M, Alam M, et al. Surgical Nasal Stent Fabrication Using Innovative Multisegmental Cast to Rehabilitate Anatomic and Functional Dynamicity of Upper Airway: A Case Report. Int J Clin Pediatr Dent 2023;16(S-2):S220-S223.

Novel prosthodontic technique in fabrication of customized nasal stent in an infant.

Burn injuries have a major impact on the physical and functional aspects of patients, thereby affecting their quality of life. Nasal stenosis which occurs as a result of wound contraction may lead to serious complications if not intervened at the earliest. In the prosthodontic front, nasal stents may be utilized in conjunction with reconstructive surgery procedures to minimize scar contraction and prevent nasal stenosis. This clinical report focuses on a customized technique in the fabrication of nasal stent to maintain the nasal airway patency in an infant who had suffered burn injuries. An intraoral tip was employed as a receptacle for accurate impression making, followed by the insertion of an intermediate stent fashioned from a scalp vein set catheter. The definitive stent fabricated using methyl methacrylate resin served to maintain the patency of the nasal passageway.

Mechanical property analysis and design parameter optimization of a novel nitinol nasal stent based on numerical simulation.

Background: A novel braided nasal stent is an effective alternative to nasal packing after septoplasty that can be used to manage the mucosal flap after septoplasty and expand the nasal cavity. This study aimed to investigate the influence of design parameters on the mechanical properties of the nasal stent for optimal performance. Methods: A braided nasal stent modeling method was proposed and 27 stent models with a range of different geometric parameters were built. The compression behavior and bending behavior of these stent models were numerically analyzed using a finite element method (FEM). The orthogonal test was used as an optimization method, and the optimized design variables of the stent with improved performance were obtained based on range analysis and weight grade method. Results: The reaction force and bending stiffness of the braided stent increased with the wire diameter, braiding density, and external stent diameter, while wire diameter resulted as the most important determining parameter. The external stent diameter had the greatest influence on the elongation deformation. The influence of design parameters on von-Mises stress distribution of bent stent models was visualized. The stent model with geometrical parameters of 25 mm external diameter, 30° braiding angle, and 0.13 mm wire diameter (A3B3C3) had a greater reaction force but a considerably smaller bending stiffness, which was the optimal combination of parameters. Conclusion: Firstly, among the three design parameters of braided stent models, wire diameter resulted as the most important parameter determining the reaction force and bending stiffness. Secondly, the external stent diameter significantly influenced the elongation deformation during the compression simulation. Finally, 25 mm external diameter, 30° braiding angle, and 0.13 mm wire diameter (A3B3C3) was the optimal combination of stent parameters according to the orthogonal test results.

Custom Nasal Stent Fabrication for Post-traumatic Nasal Obstruction - A Case Report.

Deformities of the nose can be of congenital, traumatic, or iatrogenic etiology. The aim of treating nasal/nostril stenosis is to establish an adequate airway and restore facial profile; this may be achieved by surgical correction or prosthetic means. This case report presents the fabrication of a customized rigid acrylic stent for alar stenosis in an 18-year-old girl occurring as a result of trauma. The functional and aesthetic result is evaluated at six months. Thus, customized acrylic nasal stents provide an easy-to-fabricate, economical option for the maintenance of nasal contour and patency of the airway.

Naso-alveolar molding for newborn cleft lip and palate.

The nasoalveolarmolding (NAM) technique is a relatively new approach to pre-surgical infant orthopedics that reduces the severity of the initial cleft alveolar and nasal deformity before surgery. This technique has proved to be an effective adjunctive therapy for reducing cleft deformity before surgery. Data on NAM are inconsistent with changes in nasal symmetry. However, there is a trend towards a positive effect. Therefore, it is of interest to report clinicians an overview of NAM appliance and method for nasal symmetry assessment to facilitate greater usage of this technique in contemporary practice. Thus, the biomechanics of pre-surgical infant orthopedics and of nasal stent that skillfully shape alveolus and nasal cartilage is explained.

Novel treatment for hypotonic airway obstruction and severe obstructive sleep apnea using a nasopharyngeal airway device with 3D printing innovation.

STUDY OBJECTIVES: Pediatric obstructive sleep apnea impacts child and familial well-being. Airway management in patients with hypotonic pharyngeal conditions is complex. Some patients may benefit from continuous positive airway pressure or bilevel positive airway pressure, others may require further invasive measures for treatment. There is critical need for treatment alternatives for patients with pharyngeal hypotonia. METHODS: This is a retrospective case series. Collaboratively with patients, families, biomedical engineers, and medical professionals, a long-term nasopharyngeal airway (NPA) was created to bypass upper airway obstruction. Two patients used a safety pin and tape attachment, and two patients used a novel 3D-printed, self-supporting nasal securement. All 4 patients had polysomnography before and during NPA use. Paired 1-tailed t-tests were conducted to compare apnea-hypopnea index, hypopnea index, obstructive index, and oxygen nadir. RESULTS: Compared to baseline polysomnography, repeat polysomnography with the NPA in place demonstrated statistically significant improvement for apnea-hypopnea index (75.8 ± 36.6 events/h to 8.9 ± 2.9 events/h, P = .03), hypopnea index (45.4 ± 25.8 events/h to 7.7 ± 3.2 events/h, P = .04), and oxygen saturation nadir (60.3 ± 13.0% to 79.3 ± 8.7%, P = .01). The NPA had been used for over 1 year in 3 of the 4 children. Those using the safety pin and tape did report skin irritation due to adhesive required to keep device in place. CONCLUSIONS: Current management of severe upper airway obstruction and obstructive sleep apnea in hypotonic pharyngeal conditions requires a team-based approach to care. A long-term NPA device may be an alternative or temporizing option to continuous positive airway pressure, upper airway surgery, or tracheostomy in children with pharyngeal hypotonia and severe obstructive sleep apnea. Larger studies of this approach are underway to assess efficacy in a range of obstructive sleep apnea severity in this population. CITATION: Powell AR, Srinivasan S, Helman JL, et al. Novel treatment for hypotonic airway obstruction and severe obstructive sleep apnea using a nasopharyngeal airway device with 3D printing innovation. J Clin Sleep Med. 2022;18(10):2497-2502.

Comparative evaluation of nasal and alveolar changes in complete unilateral cleft lip and palate patients using intraoral and extraoral nasoalveolar molding techniques: randomized controlled trial.

OBJECTIVES: Cleft lip and palate is a common congenital anomaly that impairs the aesthetics, speech, hearing, and psychological and social life of an individual. To achieve good aesthetic outcomes, presurgical nasoalveolar molding (NAM) has become important. Currently, the intraoral NAM technique is widely practiced. Numerous modifications have been made to intraoral NAM techniques, but the original problem of compliance leading to discontinuation of treatment remains unsolved. Therefore, the present study compared an extraoral NAM technique with the intraoral NAM technique. MATERIALS AND METHODS: Twenty infants with complete unilateral cleft lip and palate were included and divided into two equal groups. Group A received the intraoral NAM technique, and Group B received the extraoral NAM technique. Pre- and postoperative extraoral and intraoral measurements were recorded. RESULTS: Groups A and B did not differ significantly in any extraoral or intraoral parameter. CONCLUSION: The extraoral NAM technique is as effective as the intraoral NAM technique in achieving significant nasal and alveolar changes in com-plete unilateral cleft lip and palate patients. Additionally, it reduces the need for frequent hospital visits for activation and the stress associated with the insertion and removal of the intraoral NAM plate, thereby improving compliance.

Sinonasal Stent Coated with Slow-Release Varnish of Chlorhexidine Has Sustained Protection against Bacterial Biofilm Growth in the Sinonasal Cavity: An In Vitro Study.

The aim of the study was to develop a sustained-release varnish (SRV) containing chlorhexidine (CHX) for sinonasal stents (SNS) to reduce bacterial growth and biofilm formation in the sinonasal cavity. Segments of SNS were coated with SRV-CHX or SRV-placebo and exposed daily to bacterial cultures of Staphylococcus aureus subsp. aureus ATCC 25923 or Pseudomonas aeruginosa ATCC HER-1018 (PAO1). Anti-bacterial effects were assessed by disc diffusion assay and planktonic-based activity assay. Biofilm formation on the coated stents was visualized by confocal laser scanning microscopy (CLSM) and high-resolution scanning electron microscopy (HR-SEM). The metabolic activity of the biofilms was determined using the 3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) method. Disc diffusion assay showed that SRV-CHX-coated SNS segments inhibited bacterial growth of S. aureussubsp. aureus ATCC 25923 for 26 days and P. aeruginosa ATCC HER-1018 for 19 days. CHX was released from coated SNS segments in a pH 6 medium up to 30 days, resulting in growth inhibition of S. aureussubsp. aureus ATCC 25923 for 22 days and P. aeruginosa ATCC HER-1018 for 24 days. The MTT assay showed a reduction of biofilm growth on the coated SNS by 69% for S. aureussubsp. aureus ATCC 25923 and 40% for P. aeruginosa ATCC HER-1018 compared to the placebo stent after repeated exposure to planktonic growing bacteria. CLSM and HR-SEM showed a significant reduction of biofilm formation on the SRV-CHX-coated SNS segments. Coating of SNS with SRV-CHX maintains a sustained delivery of CHX, providing an inhibitory effect on the bacterial growth of S. aureussubsp. aureus ATCC 25923 and P. aeruginosa ATCC HER-1018 for approximately 3 weeks.

Design and characterization of plasticized bacterial cellulose/waterborne polyurethane composite with antibacterial function for nasal stenting.

A nasal stent capable of preventing adhesions and inflammation is of great value in treating nasal diseases. In order to solve the problems of tissue adhesion and inflammation response, we prepared plasticized bacterial cellulose (BCG) and waterborne polyurethane (WPU) composite with antibacterial function used as a novel nasal stent. The gelation behavior of BCG could contribute to protecting the paranasal sinus mucosa; meanwhile, the WPU with improved mechanical property was aimed at supporting the narrow nasal cavity. The thickness, size and the supporting force of the nasal stent could be adjusted according to the specific conditions of the nasal. Thermogravimetric analysis, contact angle and water absorption test were applied to investigate the thermal, hydrophilic and water absorption properties of the composite materials. The composite materials loaded with poly(hexamethylene biguanide) hydrochloride maintained well antibacterial activity over 12 days. Animal experiments further revealed that the mucosal epithelium mucosae damage of BCG-WPU composite was minor compared with that of WPU. This new type of drug-loaded nasal stent can effectively address the postoperative adhesions and infections while ensuring the health of nasal mucosal, and thus has an immense clinical application prospects in treating nasal diseases.

Animal Bite in a 6-month-old Child and Facial Injury with Associated Unusual Nasal Injury: Management of Injuries along with 1-year Follow-up.

In children, accidental injuries (AI) are the most common cause of major trauma. Although rare, nonaccidental injuries (NAI) can also cause major trauma. Among NAI, animal bites form a significant fraction. Animal bites form a significant fraction of NAI in children. Amongst animal bites, dog and cat bites are the most common. In adults, the likelihood of bites is on leg/thigh but in children due to their low stature, bites are more common on scalp, head, neck, or chest region. As children have lower tissue mass/size, what appears a small wound in adults comparatively appears as a larger wound in children, causing severe disfigurement. The present paper discusses cat bite injury to maxillofacial region, distinguishing from other differential diagnoses. Potential complications, initial management, and total rehabilitation of facial injuries especially nasal injury caused by a cat in a 6-month-old child are also discussed. HOW TO CITE THIS ARTICLE: Sikka N, Jayam C, Choudhary RS, et al. Animal Bite in a 6-month-old Child and Facial Injury with Associated Unusual Nasal Injury: Management of Injuries along with 1-year Follow-up. Int J Clin Pediatr Dent 2019;12(6):560-565.

Orthopaedic traction with passive nasoalveolar moulding in a bilateral cleft lip and palate patient - Rediscovering the old.

INTRODUCTION: A 22-day-old male infant presented with complete bilateral cleft lip and palate with prominent premaxillary segment, wide alar base, flat alar domes and no columellar tissue, thus leading to a severe facial deformity. A presurgical nasoalveolar moulding (PNAM) procedure was planned to facilitate an optimal surgical approximation of the cleft and surrounding tissues. METHODS: PNAM was performed on the basis of the hypothesis that 'The palatal shelves continue to grow unabated if adequate relief is provided by wax mock up while preparing the feeding plate'. An intraoral device, which consisted of an acrylic feeding plate, was constructed after adequate wax mock up in the cleft area for passive moulding, along with extraoral traction force through active lip taping. A nasal stent was subsequently attached to lift the nasal domes and lengthen the columella. The changes thus achieved with PNAM were assessed using innovative photographic and model analyses. RESULTS: On completion of PNAM, the qualitative photographic changes showed significant premaxillary setback, columellar lengthening and fullness of alar domes. The quantitative model analysis revealed reduction in the anteroposterior cleft gap by 5 mm and 5.5 mm on right and left sides, respectively. Transverse distance between the two palatal segments reduced by 3.5 mm, 8 mm and 8.5 mm in anterior, middle and posterior regions, respectively. CONCLUSION: Orthodontic intervention performed for 11 weeks by PNAM helped to retract the premaxilla, reduce the cleft gap, improve the arch form, approximate lip segments and distinctly lengthen the columella. Hence, it improved the morphology of the nose by correcting the flattened nasal wings. This aided the surgeon to achieve an optimal surgical repair.

Biodegradable nasal stents (MgF2 -coated Mg-2 wt %Nd alloy)-A long-term in vivo study.

Despite innovative surgical techniques and use of current frontal sinus stents from different materials, the problem of treatment failure with consecutive reoperation remains present. The aim of our study is to investigate biocompatibility, degradation kinetics, and functionality of a newly developed fluoride-coated magnesium-based nasal stent. A minipig anatomy of frontal sinus adapted design and an external surgical approach were developed and established. The functionality of the stents was evaluated endoscopically. The stent-tissue blocks were analysed after 90 and 180 days using microcomputed tomography (µ-CT), histology, scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS). Functional evaluation revealed an unobstructed stent lumen in all cases. Histological analysis showed moderate mucosal hyperplasia with a mild, nonspecific inflammatory response, and nonosteoconductive effect. Rejection reactions or necrosis did not occur. The volumetric analysis of the stents showed 51% volume loss after 180 days. The EDS analysis did not detect any neodymium (Nd) in the mucosa or bone. The Mg-2 wt % Nd stents are a promising option when treating the narrow passages following paranasal sinus surgery. In particular, its good biocompatibility and good functionality facilitate the re-epithelization of these constricted passages. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 350-365, 2017.

RapidNAM: generative manufacturing approach of nasoalveolar molding devices for presurgical cleft lip and palate treatment.

Nasoalveolar molding (NAM) is an accepted treatment strategy in presurgical cleft therapy. The major drawbacks of the treatment listed in the literature relate to the time of the treatment and the coordination of the required interdisciplinary team of therapists, parents, and patients. To overcome these limitations, we present the automated RapidNAM concept that facilitates the design and manufacturing process of NAM devices, and that allows the virtual modification and subsequent manufacture of the devices in advance, with a growth prediction factor adapted to the patient's natural growth. The RapidNAM concept involves (i) the prediction of three trajectories that envelope the fragmented alveolar segments with the goal to mimic a harmonic arch, (ii) the extrusion from the larger toward the smaller alveolar segment along the envelope curves toward the harmonic upper alveolar arch, and (iii) the generation of the NAM device with a ventilation hole, fixation pin, and fixation points for the nasal stents. A feasibility study for a vector-based approach was successfully conducted for unilateral and bilateral cleft lip and palate (CLP) patients. A comparison of the modified target models with the reference target models showed similar results. For further improvement, the number of landmarks used to modify the models was increased by a curve-based approach.

Prosthetic Management of a Nasal Septal Defect using a Custom Made Unilateral Intranasal Stent: A Case Report.

Various etiologies including congenital malformations, infections, trauma, iatrogenic causes or complications of systemic diseases can result in perforation of the nasal septum. The common symptoms associated with such defects include difficulty in breathing, nasal twang in voice, rhinorrhea, etc. Obturation can be achieved by insertion of a unilateral nasal stent. An attempt has been made in the present report to address the prosthetic management of pateint having nasal septum perforation utilizing a unilateral, custom made heat cured acrylic stent and the details of the technique are presented.