A New and Practical Model of Human-Like Ascending Aorta Aneurysm in Rats.

INTRODUCTION: Ascending aortic aneurysm is a serious health risk. In order to study ascending aortic aneurysms, elastase and calcium ion treatment for aneurysm formation are mainly used, but their aneurysm formation time is long and the aneurysm formation rate is low. Thus, this study aimed to construct a rat model of ascending aorta aneurysm with a short modeling time and high aneurysm formation rate, which may mimic the pathological processes of human ascending aorta aneurysm. METHODS: Cushion needles with different pipe diameters (1.0, 1.2, 1.4, and 1.6 mm) were used to establish a human-like rat model of ascending aortic aneurysm by narrowing the ascending aorta of rats and increasing the force of blood flow on the vessel wall. The vascular diameters were evaluated using color Doppler ultrasonography after 2 weeks. The characteristics of ascending aortic aneurysm in rats were detected by Masson's trichrome staining, Verhoeff's Van Gieson staining, and hematoxylin and eosin staining, while real-time polymerase chain reaction was utilized to assess the total RNA of cytokine interleukin-1ß, interleukin 6, transforming growth factor-beta 1, and metalloproteinase 2. RESULTS: Two weeks after surgery, the ultrasound images and the statistical analysis demonstrated that the diameter of the ascending aorta in rats increased more than 1.5 times, similar to that in humans, indicating the success of animal modeling of ascending aortic aneurysm. Moreover, the optimal constriction diameter of the ascending aortic aneurysm model is 1.4 mm by the statistical analysis of the rate of ascending aortic aneurysm and mortality rate in rats with different constriction diameters. CONCLUSIONS: The human-like ascending aortic aneurysm model developed in this study can be used for the studies of the pathological processes and mechanisms of ascending aortic aneurysm in a more clinically relevant fashion.

Prevalence and stability of blood-injection-injury phobia in childhood-A prospective community study in Norway.

AIM: An individual with a blood-injection-injury (BII) phobia often avoids exposure to triggers, such as blood tests and clinic appointments, leading to potentially serious health complications. This population-based study examined the prevalence, stability and course of BII phobia in children and adolescents. METHODS: The data came from the Trondheim Early Secure Study, conducted from 2007 to 2018. All children born in Trondheim, Norway, in 2003 and 2004 were invited to attend. Clinical interviews were conducted by trained personnel to assess BII phobia in 1042 children (51% female) every 2 years from 4 to 14 years of age. Latent growth curves and logistic regression analyses were used in the data analysis. RESULTS: Just under 20% of the cohort experienced a BII phobia at least once, with no significant sex differences. The prevalence of BII phobias increased from 3% at 4 years of age and peaked at about 8% at 10 years of age, before levelling off. The two-year stability increased as 12-14 years of age approached. CONCLUSION: The prevalence of BII was affected by age, but not sex. Early BII phobias often recede with time, but children may need treatment if they persist from 8 years of age.

Ice needles weave patterns of stones in freezing landscapes.

Patterned ground, defined by the segregation of stones in soil according to size, is one of the most strikingly self-organized characteristics of polar and high-alpine landscapes. The presence of such patterns on Mars has been proposed as evidence for the past presence of surface liquid water. Despite their ubiquity, the dearth of quantitative field data on the patterns and their slow dynamics have hindered fundamental understanding of the pattern formation mechanisms. Here, we use laboratory experiments to show that stone transport is strongly dependent on local stone concentration and the height of ice needles, leading effectively to pattern formation driven by needle ice activity. Through numerical simulations, theory, and experiments, we show that the nonlinear amplification of long wavelength instabilities leads to self-similar dynamics that resemble phase separation patterns in binary alloys, characterized by scaling laws and spatial structure formation. Our results illustrate insights to be gained into patterns in landscapes by viewing the pattern formation through the lens of phase separation. Moreover, they may help interpret spatial structures that arise on diverse planetary landscapes, including ground patterns recently examined using the rover Curiosity on Mars.

In situ magnetic identification of giant, needle-shaped magnetofossils in Paleocene-Eocene Thermal Maximum sediments.

Near-shore marine sediments deposited during the Paleocene-Eocene Thermal Maximum at Wilson Lake, NJ, contain abundant conventional and giant magnetofossils. We find that giant, needle-shaped magnetofossils from Wilson Lake produce distinct magnetic signatures in low-noise, high-resolution first-order reversal curve (FORC) measurements. These magnetic measurements on bulk sediment samples identify the presence of giant, needle-shaped magnetofossils. Our results are supported by micromagnetic simulations of giant needle morphologies measured from transmission electron micrographs of magnetic extracts from Wilson Lake sediments. These simulations underscore the single-domain characteristics and the large magnetic coercivity associated with the extreme crystal elongation of giant needles. Giant magnetofossils have so far only been identified in sediments deposited during global hyperthermal events and therefore may serve as magnetic biomarkers of environmental disturbances. Our results show that FORC measurements are a nondestructive method for identifying giant magnetofossil assemblages in bulk sediments, which will help test their ecology and significance with respect to environmental change.

Community pharmacists' attitudes toward and practice of pharmacy-based harm reduction services in Pittsburgh, PA: a descriptive survey.

BACKGROUND: In Pittsburgh, PA, legal changes in recent decades have set the stage for an expanded role for community pharmacists to provide harm reduction services, including distributing naloxone and non-prescription syringes (NPS). In the wake of the syndemics of the COVID-19 pandemic and worsening overdose deaths from synthetic opioids, we examine knowledge, attitudes, and practices of harm reduction services among community pharmacists in Pittsburgh and identify potential barriers of expanded pharmacy-based harm reduction services. METHODS: We provided flyers to 83 community pharmacies within a 5-mile radius of the University of Pittsburgh Medical Center to recruit practicing community pharmacists to participate in an anonymous electronic survey. We used a 53-question Qualtrics survey consisting of multiple-choice, 5 or 6 point-Likert scale, and open-ended questions adapted from 5 existing survey instruments. Survey measures included demographics, knowledge, attitudes, and practices of harm reduction services (specifically naloxone and NPS provision), and explored self-reported barriers to future implementation. Data was collected July-August 2022. We conducted descriptive analysis using frequencies and proportions reported for categorical variables as well as means and standard deviations (SD) for continuous variables. We analyzed open-ended responses using inductive content analysis. RESULTS: Eighty-eight community pharmacists responded to the survey. 90% of participants agreed pharmacists had a role in overdose prevention efforts, and 92% of participants had previously distributed naloxone. Although no pharmacists reported ever refusing to distribute naloxone, only 29% always provided overdose prevention counseling with each naloxone distributed. In contrast, while 87% of participants had positive attitudes toward the usefulness of NPS for reducing disease, only 73% of participants ever distributed NPS, and 54% had refused NPS to a customer. Participants endorsed a lack of time and concerns over clientele who used drugs as the most significant barriers to offering more comprehensive harm reduction services. CONCLUSIONS: Our findings highlight that while most community pharmacists have embraced naloxone provision, pharmacy policies and individual pharmacists continue to limit accessibility of NPS. Future expansion efforts for pharmacy-based harm reduction services should not only address the time and labor constraints identified by community pharmacists, but also fear-based policy and stigma toward people who inject drugs and harm reduction more broadly.

Management of the intraoperative loss of microsurgical needles: A literature review and clinical survey.

Data on the incidence, management, and consequences of retained microsurgical needles in plastic and reconstructive surgery remains sparse. Research suggests that a mobile C-arm x-ray has a low detection rate for needles of size 8-0 or smaller. By means of a literature review, and survey, we aimed to investigate the current practice employed in the event of the intraoperative loss of a microsurgical needle. A literature review was conducted investigating the incidence, current management strategies, and consequences of retained microsurgical needles. This informed the questions included in a survey investigating management strategies employed in the intra-operative loss of a microsurgical needle. Results from the literature review show an overall low detection rate of microsurgical needles on imaging. Of the forty responders who completed the survey, 80% did not use a mobile C-arm x-ray to locate a missing microsurgical needle. Of the 20% that had done so, x-ray had been unsuccessful in locating the needle in all cases. Portable x-ray has a definite role to play in locating needles of size 7-0 or larger. This study suggests that suture needles of size 8-0 or smaller cannot be reliably detected on x-ray. Regarding management of this event, one should consider the risk of harm to the patient if retained, against the risk of searching for the needle. Based on the results of this work as well as existing published data, we advise against obtaining intra-operative x-rays in the event of a lost needle size 8-0 and above. Appropriate documentation should be completed.

Construction of a Hair Implantation Needle Using Injection Needles and Assessment of its Efficiency Compared with Other Planting Methods.

INTRODUCTION: Hair transplantation surgery requires the efficient completion of hair follicles and thus appropriate hair implantation needles. The objectives of this study were to evaluate the effectiveness and feasibility of self-made hair implantation needles using injection needles and evaluate the speed of different hair implantation methods. METHODS: Four patients were randomly assigned to four groups. A gem knife pre-punching planting method was used for the patient in Group A, while Group B received immediate implantation after punching with ordinary injection needles, Group C was treated with synchronized punching and planting using hair implanters, and Group D was treated with a self-made hair implantation needle. The speed of the different implantation methods for single and double hair follicles and the differences between the planting of single and double hair follicles were assessed. RESULTS: Group D was found to have the fastest hair planting speed for both single and double hair follicles, followed by Groups C and A, with the slowest speed observed in Group B. Groups A and B were associated with significantly lower speeds of double hair planting than single hair planting, There was no significant difference between Groups C and D. CONCLUSIONS: The self-made hair implantation needle is a novel and efficient tool for synchronized punching and planting. It has a faster planting speed and does not require assistance. LEVEL OF EVIDENCE II: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Utilizing Cymbopogon Proximus Grass Extract for Green Synthesis of Zinc Oxide Nanorod Needles in Dye Degradation Studies.

This study successfully synthesized zinc oxide nanorod needles (ZnO-NRNs) using an environmentally friendly method employing Cymbopogon Proximus extract. The resulting ZnO-NRNs exhibited exceptional physicochemical and structural properties, confirmed through various characterization techniques, including UV-Vis spectrophotometry, dynamic light scattering (DLS), transmission electron microscopy (TEM), X-ray diffraction (XRD), and energy-dispersive X-ray spectroscopy (EDX). The analysis revealed a hexagonal wurtzite structure with high crystallinity, a 3.6 eV band gap, and a notably blue-shifted absorption band. ZnO-NRNs showed impressive photocatalytic activity, degrading Rhodamine B dye by 97% under UV and visible sunlight, highlighting their photostability and reusability. This green synthesis process offers cost effectiveness and environmental sustainability for practical applications.

An Integrated Strategy Based on 10-DAB Extraction and In Situ Whole-Cell Biotransformation of Renewable Taxus Needles to Produce Baccatin III.

Baccatin III is a crucial precursor in the biosynthesis pathway of paclitaxel. Its main sources are extraction from Taxus or chemical synthesis using 10-deacetylbaccatin III (10-DAB) as substrate. However, these preparation approaches exhibit serious limitations, including the low content of baccatin III in Taxus and the complicated steps of chemical synthesis. Heterologous expression of 10-deacetylbaccatin III-10-O-acetyltransferase (TcDBAT) in microbial strains for biotransformation of 10-DAB is a promising alternative strategy for baccatin III production. Here, the promotion effects of glycerol supply and slightly acidic conditions with a low-temperature on the catalysis of recombinant TcDBAT strain were clarified using 10-DAB as substrate. Taxus needles is renewable and the content of 10-DAB is relatively high, it can be used as an effective source of the catalytic substrate 10-DAB. Baccatin III was synthesized by integrating the extraction of 10-DAB from renewable Taxus needles and in situ whole-cell catalysis in this study. 40 g/L needles were converted into 20.66 mg/L baccatin III by optimizing and establishing a whole-cell catalytic bioprocess. The method used in this study can shorten the production process of Taxus extraction for baccatin III synthesis and provide a reliable strategy for the efficient production of baccatin III by recombinant strains and the improvement of resource utilization rate of Taxus needles.

The safety and response of CT guided percutaneous cryoablation for lung nodules by 17-gauge needles.

BACKGROUND: The safety and efficacy of 17-gauge needles used in CT-guided percutaneous cryoablation for lung nodules were explored in this study. The purpose of the study was to compare the findings with earlier research and multi-center clinical trials that used various needle sizes. METHODS: Between 2016 and 2020, a retrospective study was conducted with approval from the institutional review board. A total of 41 patients were enrolled, and 71 lung nodules were treated in 63 cryoablation procedures using local anesthesia. Complication rates were recorded, and overall survival rates as well as tumor progression-free rates were calculated using the Kaplan-Meier method. RESULTS: Self-limited hemoptysis was caused by 12.9% of the procedures, and drainage was required for pneumothoraces resulting from 11.3% of them. The overall survival rates at one, two, three, and four years were 97%, 94%, 82%, and 67%, respectively. The tumor progression-free rates at one, two, three, and four years were 86.2%, 77%, 74%, and 65%, respectively. CONCLUSION: Cryoablation for lung nodules using 17-Gauge needles can achieve similar rates of survival and tumor control rates, similar or even lower complication rates as compared with other studies and multi-center trials using mixed sized needles.

Deciphering the Antimicrobial Potential of Taxus wallichiana Zucc: Identification and Characterization Using Bioassay-Guided Fractionation.

Taxus wallichiana Zucc. is a high valued medicinal plant and has been mainly studied for its anti-cancer properties. However, research on its other important biological activities, such as its antimicrobial potential, still needs attention. The focus of the present study is to investigate the antimicrobial activity of secondary metabolites of T. wallichiana needles against 3 different groups of microorganisms, i. e., bacteria, actinobacteria, and fungi. Bioactive compounds from T. wallichiana needles were separated through column chromatography, and, TLC-bioautography. Mobile phases were optimized using Snyder's selectivity triangle. Antimicrobial spots were fractionated and compounds were identified by gas chromatography-mass spectroscopy (GC/MS) and liquid chromatography-mass spectrometry (LC/MS). Functional groups were characterized using Fourier transform infrared spectrometry (FTIR) and nuclear magnetic resonance (NMR) was used to identify the molecular structures. GC/MS and LC/MS data analysis confirm the presence of fatty acids (arachidic acid, behenic acid, palmitic acid, and stearic acid), vitamins (nicotinamide), and alkaloids (cinchonine, timolol), aminobenzamides (procainamide), carbocyclic sugar (myoinositol), and alkane hydrocarbon (hexadecane), having antimicrobial activity in the needles of T. wallichiana. To the best of our knowledge, this is the first report on the isolation and characterization of antimicrobial compounds from the needles of Taxus wallichiana (Himalayan yew). The data obtained from the present study will be supportive to the new drug discoveries in modern medicine with various combinations of medicinal plant's active constituents that can be used for curing many diseases.

Impact of the Number of Needle Tip Bevels on the Exerted Forces and Energy in Insulin Pen Injections.

Patients affected with type 1 diabetes and a non-negligible number of patients with type 2 diabetes are insulin dependent. Both the injection technique and the choice of the most suitable needle are fundamental for allowing them to have a good injection experience. The needles may differ in several parameters, from the length and diameter, up to the forces required to perform the injection and to some geometrical parameters of the needle tip (e.g., number of facets or bevels). The aim of the research is to investigate whether an increased number of bevels could decrease forces and energy involved in the insertion-extraction cycle, thus potentially allowing patients to experience lower pain. Two needle variants, namely, 31 G × 5 mm and 32 G × 4 mm, are considered, and experimental tests are carried out to compare 3-bevels with 5-bevels needles for both the variants. The analysis of the forces and energy for both variants show that the needles with 5 bevels require a statistically significant lower drag or sliding force (p-value = 0.040 for the 31 G × 5 mm needle and p-value < 0.001 for 32 G × 4 mm), extraction force (p-value < 0.001 for both variants), and energy (p-value < 0.001 for both variants) during the insertion-extraction cycle. As a result, 3-bevels needles do not have the same functionality of 5-bevels needles, show lower capacity of drag and extraction, and can potentially be related to more painful injection experience for patients.

Small Cellular Particles from European Spruce Needle Homogenate.

Small cellular particles (SCPs) are being considered for their role in cell-to-cell communication. We harvested and characterized SCPs from spruce needle homogenate. SCPs were isolated by differential ultracentrifugation. They were imaged by scanning electron microscope (SEM) and cryogenic transmission electron microscope (cryo TEM), assessed for their number density and hydrodynamic diameter by interferometric light microscopy (ILM) and flow cytometry (FCM), total phenolic content (TPC) by UV-vis spectroscopy, and terpene content by gas chromatography-mass spectrometry (GC-MS). The supernatant after ultracentrifugation at 50,000× g contained bilayer-enclosed vesicles whereas in the isolate we observed small particles of other types and only a few vesicles. The number density of cell-sized particles (CSPs) (larger than 2 µm) and meso-sized particles (MSPs) (cca 400 nm-2 µm) was about four orders of magnitude lower than the number density of SCPs (sized below 500 nm). The average hydrodynamic diameter of SCPs measured in 10,029 SCPs was 161 ± 133 nm. TCP decreased considerably due to 5-day aging. Volatile terpenoid content was found in the pellet after 300× g. The above results indicate that spruce needle homogenate is a source of vesicles to be explored for potential delivery use.

Strategy of Coniferous Needle Biorefinery into Value-Added Products to Implement Circular Bioeconomy Concepts in Forestry Side Stream Utilization.

Sustainable development goals require a reduction in the existing heavy reliance on fossil resources. Forestry can be considered a key resource for the bioeconomy, providing timber, energy, chemicals (including fine chemicals), and various other products. Besides the main product, timber, forestry generates significant amounts of different biomass side streams. Considering the unique and highly complex chemical composition of coniferous needle/greenery biomass, biorefinery strategies can be considered as prospective possibilities to address top segments of the bio-based value pyramid, addressing coniferous biomass side streams as a source of diverse chemical substances with applications as the replacement of fossil material-based chemicals, building blocks, food, and feed and applications as fine chemicals. This study reviews biorefinery methods for coniferous tree forestry biomass side streams, exploring the production of value-added products. Additionally, it discusses the potential for developing further biorefinery strategies to obtain products with enhanced value.

A sewing needle as a urethral foreign body: A case report and literature review.

Foreign bodies in the urethra can occur by self-insertion, and patients often hide the symptoms due to embarrassment. Foreign bodies act as a focus for infection and abscess formation and result in perforation or fistula when not detected on time. Foreign bodies can display symptoms such as frequent urination, dysuria, hematuria, urethrorrhagia, and obstruction. This case discusses a self-inserted urethral sewing needle that was removed cystoscopically from an adolescent.

Analysis of the transcriptome of the needles and bark of Pinus radiata induced by bark stripping and methyl jasmonate.

BACKGROUND: Plants are attacked by diverse insect and mammalian herbivores and respond with different physical and chemical defences. Transcriptional changes underlie these phenotypic changes. Simulated herbivory has been used to study the transcriptional and other early regulation events of these plant responses. In this study, constitutive and induced transcriptional responses to artificial bark stripping are compared in the needles and the bark of Pinus radiata to the responses from application of the plant stressor, methyl jasmonate. The time progression of the responses was assessed over a 4-week period. RESULTS: Of the 6312 unique transcripts studied, 86.6% were differentially expressed between the needles and the bark prior to treatment. The most abundant constitutive transcripts were related to defence and photosynthesis and their expression did not differ between the needles and the bark. While no differential expression of transcripts were detected in the needles following bark stripping, in the bark this treatment caused an up-regulation and down-regulation of genes associated with primary and secondary metabolism. Methyl jasmonate treatment caused differential expression of transcripts in both the bark and the needles, with individual genes related to primary metabolism more responsive than those associated with secondary metabolism. The up-regulation of genes related to sugar break-down and the repression of genes related with photosynthesis, following both treatments was consistent with the strong down-regulation of sugars that has been observed in the same population. Relative to the control, the treatments caused a differential expression of genes involved in signalling, photosynthesis, carbohydrate and lipid metabolism as well as defence and water stress. However, non-overlapping transcripts were detected between the needles and the bark, between treatments and at different times of assessment. Methyl jasmonate induced more transcriptional responses in the bark than bark stripping, although the peak of expression following both treatments was detected 7 days post treatment application. The effects of bark stripping were localised, and no systemic changes were detected in the needles. CONCLUSION: There are constitutive and induced differences in the needle and bark transcriptome of Pinus radiata. Some expression responses to bark stripping may differ from other biotic and abiotic stresses, which contributes to the understanding of plant molecular responses to diverse stresses. Whether the gene expression changes are heritable and how they differ between resistant and susceptible families identified in earlier studies needs further investigation.

Acupuncture Needle-Based Transistor Neuroprobe for In Vivo Monitoring of Neurotransmitter.

Chemical communication via neurotransmitters is central to brain functions. Nevertheless, in vivo real-time monitoring of neurotransmitters released in the brain, especially the electrochemically inactive molecules, remains a great challenge. In this work, a novel needle field-effect transistor (FET) microsensor based on an acupuncture needle is proposed, which is demonstrated to be capable of real-time monitoring dopamine molecules as well as neuropeptide Y in vivo. The FET microstructure is fabricated by successively wrapping an insulating layer and a gold layer on the top of the needle, where the needle and the Au served as the source and drain, respectively. After assembling reduced graphene oxide (RGO) between the source and drain electrodes, the specific aptamer is immobilized on the RGO, making this needle-FET biosensor highly selective and sensitive to real-time monitor neurotransmitters released from rat brain, even in a Parkinson's diseases model. Furthermore, the needle-FET biosensor is applied to detect a variety of targets including hormones, proteins, and nucleic acid. By constructing a FET sensing interface on an acupuncture needle and implanting the sensor in a rat's brain for in vivo detection, this work provides a new sight in the FET domain and further expands the species of real-time in vivo detection.

Minimal artifact actively shimmed metallic needles in MRI.

PURPOSE: Signal voids caused by metallic needles pose visualization and monitoring challenges in many MRI applications. In this work, we explore a solution to this problem in the form of an active shim insert that fits inside a needle and corrects the field disturbance (ΔB0 ) caused by the needle outside of it. METHODS: The ΔB0 induced by a 4 mm outside-diameter titanium needle at 3T is modeled and a two-coil orthogonal shim set is designed and fabricated to shim the ΔB0 . Signal recovery around the needle is assessed in multiple orientations in a water phantom with four different pulse sequences. Phase stability around the needle is assessed in an ex-vivo porcine tissue dynamic gradient echo experiment with and without shimming. Additionally, heating of the shim insert is assessed under 8 min of continuous operation with 1A current and concurrent imaging. RESULTS: An average recovery of ~63% of lost signal around the needle across orientations is shown with active shimming with a maximum current of 1.172 A. Signal recovery and correction of the underlying ΔB0 is shown to be independent of imaging sequence. Needle-induced phase gradients outside the perceptible signal void are also minimized with active shimming. Temperature rise of up to 0.9° Celsius is noted over 8 min of continuous 1A active shimming operation. CONCLUSION: A sequence independent method for minimization of metallic needle induced signal loss using an active shim insert is presented. The method has potential benefits in a range of qualitative and quantitative interventional MRI applications.

Renal puncture access using a blunt needle: proposal of the blunt puncture concept.

PURPOSE: Severe haemorrhage in percutaneous nephrolithotomy (PCNL) is an alarming event, and preventing injury to renal major vessels is a challenge. We evaluated the efficiency of a blunt needle in renal puncture procedures. METHODS: We first retrospectively reviewed the embolization images of post-PCNL patients to analyse the types of arteries injured, which were considered target arteries. Then, either a blunt needle or a conventional needle was used to directly puncture target arteries in ex vivo porcine kidneys and to establish renal access ex vivo and in vivo. The primary outcome was the incidence of target artery injuries, which were observed by digital subtraction angiography, nephroscopy and 3-dimensional endocasts. The secondary outcome was the rate of excreted fluid per access. RESULTS: The segmental and interlobar arteries were the most common types of injured arteries that needed to be embolized after PCNL. When these arteries were punctured directly, blunt needles reduced injury (1/20 vs. 16/20; OR 4.750; 95% CI 1.966-11.478; P < .001) by 76% compared to injuries induced by conventional needles. Moreover, the blunt needle group also had a significantly lower incidence of these arteries' injuries ex vivo due to renal puncture and yielded a lower rate of excreted fluid in ex vivo and in vivo renal puncture procedures. CONCLUSION: A blunt needle for renal puncture can be effective in reducing injury to renal major arteries and the accompanying haemorrhage. We propose the concept of blunt puncture, which may be a promising method for achieving safe renal access in PCNL.

Does ProCore Fine-Needle Biopsy Really Improve the Clinical Outcome of Endoscopic Ultrasound-Guided Sampling of Pancreatic Masses?

INTRODUCTION: Fine-needle biopsy (FNB) has been suggested to provide better histological samples as compared to endoscopic ultrasound fine-needle aspiration (EUS-FNA). However, studies comparing EUS-FNA and EUS-FNB for pancreatic lesions reported contrasting results. The aim of this study was to compare the clinical performance of EUS-FNA versus EUS-FNB with the ProCore needle for the investigation of pancreatic lesions. METHODS: We reviewed all patients undergoing EUS for the investigation of pancreatic lesions from August 2012 to September 2018. From August 2012 to January 2015, all procedures were performed with standard needles, whereas from February 2015 to September 2018, the use of ProCore needles had been introduced. Data on diagnostic accuracy, number of needle passes, and/or adverse events were collected. RESULTS: Three hundred twenty-four patients were retrospectively evaluated: 190 (58.6%) underwent EUS-FNA and 134 (41.4%) EUS-FNB. Both EUS-FNA and EUS-FNB showed high diagnostic accuracy for malignancy (94% [95% CI: 89-97%] vs. 94% [95% CI: 89-98%]). Notably, there were no differences between EUS-FNA and EUS-FNB in terms of sensitivity, specificity, positive and negative likelihood ratio, histological core tissue retrieval, adverse events, or number of needle passes. However, subgroup analysis noted a higher diagnostic accuracy for 25G EUS-FNB as compared to 25G EUS-FNA (85.7 vs. 55.5%; *p = 0.023). CONCLUSION: EUS-FNB with the ProCore needle is safe and feasible in pancreatic lesions. The ProCore needle did not provide any advantage in terms of diagnostic accuracy, sensitivity, specificity, positive and/or negative likelihood ratio, or acquisition of the core specimen; therefore, its routine application is not supported.