Post-operative pain in non-surgical root canal treatment after sealer-based obturation versus warm vertical compaction: A randomized clinical trial.

AIM: Post-operative pain may occur after non-surgical root canal treatment (NSRCT). The root filling technique and choice of sealer may be contributing factors. This randomized controlled clinical trial compared post-operative pain and analgesics intake after NSRCT using a sealer-based obturation technique (SBO) with single-cone gutta-percha and calcium silicate sealer (CSS) versus a warm-vertical compaction (WVC) technique with gutta-percha and a resin-based sealer (RBS). METHODOLOGY: This study was designed as a parallel-two arm, double-blind, randomized superiority clinical trial registered at www. CLINICALTRIALS: gov (NCT04753138). Patients referred for NSRCT fulfilling the inclusion criteria participated in this study. Pre-operative periapical radiographs and CBCT scans were taken and numerical rating scale (NRS) pain scores were recorded. Upon completion of canal instrumentation, participants were randomly allocated to either Group SBO: SBO with CSS or Group WVC: Warm-vertical compaction with RBS. Post-operative pain and analgesics intake were recorded at 1, 3 and 7 days after endodontic treatment completion. Non-parametric Mann-Whitney U and Friedman tests and a generalized estimating equation were used to assess differences in pain scores between the groups, within each treatment group at different time points and for correlations, respectively. RESULTS: The study included 195 participants (212 teeth). One participant declined to submit the NRS form. Therefore, 194 participants (211 teeth) were included in the final analysis (99.5% response rate). No statistically significant differences in post-operative pain or analgesic intake existed between the two groups at any time point (p > .05). Age, pre-operative pain, apical diagnosis and post-operative analgesic intake were significantly related to post-operative pain (p < .05). CONCLUSIONS: Sealer-based obturation technique with CSS was associated with similar post-operative pain levels and analgesics intake as WVC with RBS. Regarding post-operative pain, SBO with CSSs may be a suitable clinical alternative.

Clinical outcomes of nonsurgical root canal treatment using NeoSealer Flo and Endosequence BC Sealer: A retrospective analysis with short-term follow-up.

OBJECTIVES: Sealers are an important component in root canal obturation to provide the seal of the root canal system. In recent years, there has been an increase in the use of hydraulic silicate sealers, commonly referred to as bioceramic sealers, due to their many advantageous properties. NeoSealer Flo (NS; Avalon Biomed USA, Houston TX) is a recently introduced premixed bioceramic sealer. There is limited evidence on its properties and clinical performance. Therefore, the purpose of this study was to evaluate the outcome of root canal treatment using NS in a sealer-based obturation technique. MATERIALS AND METHODS: The records of patients in a private practice between 2017 and 2022 were analyzed to identify both initial and retreatment cases obturated with either EndoSequence BC sealer or NS using sealer-based obturation with a minimum of one-year follow-up. Treatment outcome between NS and BC was compared with chi-square test. Logistic regression was used to identify additional prognostic factors. RESULTS: Six hundred and eighty-seven teeth met the inclusion criteria for the study. The success rate of cases obturated with BC was 94.9% and 96.5% for the cases obturated with NS. No statistically significant differences were found between the two sealer types. Presence of a periapical radiolucency or periapical radiolucency > 5.00 mm were statistically significant prognostic factors. CONCLUSIONS: Endodontic treatment using BC or NS with sealer-based obturation method is a viable treatment option. CLINICAL RELEVANCE: Root canal obturation with bioceramic sealers, such as NeoSealer Flo and Endosequence BC sealer, provide favorable clinical outcomes.

Effect of the filling technique on the filling removal from oval-shaped canals.

OBJECTIVES: This ex vivo study aimed to evaluate the influence of different filling techniques on the filling removal from oval root canals filled with bioceramic sealer. METHODS: Thirty-six mandibular incisors with single oval canals were filled with bioceramic sealer following the techniques (n = 12): single-cone, modified McSpadden, or continuous wave of condensation, and scanned by micro-computed tomography (micro-CT). The filling was removed using the Clearsonic ultrasound tip and Reciproc system up to the R40 instrument, and the working time was recorded. The teeth were scanned again by micro-CT. Percentage of remnant volume (mm³) of the filling material, dentin thickness, and root canal transportation were measured. The data was analyzed using parametric and non-parametric tests with a significance level of 5%. RESULTS: It took more time to remove the filling material using the continuous wave of condensation technique (p < 0.05), followed by the modified McSpadden and single-cone techniques. There was no difference (p > 0.05) when comparing the percentage of remaining filling material among the three groups, nor did it among the segments of each tooth. There was also no difference in the analysis of dentin thickness and transportation when comparing the groups (p > 0.05). CONCLUSIONS: The filling technique did not influence the amount of remaining filling material, dentin thickness, and transportation. The working time was longer with thermoplastic filling techniques. CLINICAL RELEVANCE: Endodontic retreatment in teeth filled with bioceramic sealers increases with their use. Several techniques are used to fill the root canals, thus, it is important to know whether the filling technique influences the non-surgical endodontic retreatment.

Assessment of the quality of root canal fillings performed on extracted teeth by undergraduate dental students in a sample from Saudi Arabia.

BACKGROUND: The educational process in the field of endodontics commences with preclinical exercises to enhance students' proficiency in cleaning, shaping, and performing root canal fillings. Therefore, this study aimed to radiographically evaluate the technical quality of root canal fillings performed by preclinical students on extracted teeth at the College of Dentistry, University of Ha'il, Saudi Arabia. METHODS: A total of 788 extracted human teeth received root canal treatment by undergraduate students. The samples were then gathered and radiographically assessed using the three quality criteria of length, density, and taper. The category of root canal fillings was classified as either acceptable or unacceptable. The criteria for evaluating the acceptability of filling quality were defined based on the presence of adequate length, density, and taper. The effectiveness of root canal fillings was also evaluated in relation to the tooth type, sex, and treatment year. The agreement between the examiners was evaluated using Cohen's kappa test, and the relationship between the research variables was determined using the chi-squared test. The significance threshold was set at 0. 05. RESULTS: The overall quality of root filling was determined to be satisfactory in 532 (67.5%) of 788 endodontically treated extracted teeth. The majority of the research sample (88.1%) had enough length, 89.6% had adequate density, and 86.4% had acceptable taper. The quality of anterior teeth was substantially better than that of posterior teeth (p < 0.001). Our findings showed that the quality of root canals was better in 2022 than it had been in earlier years (p = 0.001). The three RCT quality criteria differed significantly when compared between sexes (p = 0.002). CONCLUSIONS: The quality of the root canal fillings completed by undergraduate students was rated as acceptable. The findings of the research suggest that the implementation of routine assessments to evaluate the technical competence of undergraduate dental students performing root canal treatments could provide significant insights into the efficacy of the curriculum requirements.

Ex-vivo evaluation of clinically-set hydraulic sealers used with different canal dryness protocols and obturation techniques: a randomized clinical trial.

OBJECTIVES: This 2-part randomized parallel triple-blind clinical trial adopts a unique model assessing clinically-set hydraulic calcium silicate-based sealers (HCSBS) after different root canal dryness protocols and obturation techniques. METHODS: For the first phase of the study, 24 teeth scheduled for orthodontic extractions were allocated into four groups according to the canal dryness protocol and the obturation technique. G1 (CLC-AHP): cold lateral compaction (CLC) with AH Plus sealer, G2 (CLC-ES-SD): CLC with Endosequence (ES) after standard canal(s) dryness (SD); G3 (SC-ES-SD): matching single-cone (SC) with ES after SD; G4 (SC-ES-PD): as G3 but after partial canal(s) dryness (PD). Teeth were extracted after one month of clinical service and examined for intracanal voids by micro-CT (2D & 3D). For the 2nd phase, another 24 teeth were allocated into four groups according to the root canal dryness protocol and the HCSBS used (ES or CeraSeal (CeS)). Teeth were extracted after one month and sectioned vertically for energy dispersive X-ray (EDX)/scanning electron microscope (SEM) examination. One-way ANOVA with Games-Howell post-hoc test and Chi-square test with multiple z-tests were used for statistical analysis. RESULTS: SC-PD showed the highest percentage of voids (p < 0.05). MicroCT scans as well as EDX/SEM examination showed that PD resulted in significantly larger interfacial gaps (p < 0.001) with more hydration products at the sealer/dentin interface than SD. CONCLUSIONS: Both tested dryness protocols allowed the hydration of HCSBS and the formation of hydration products, thus standard dryness is recommended to reduce the incidence of intracanal voids. CLINICAL RELEVANCE: When using the single-cone obturation technique, intentional root canal moisture negatively affects the performance of HCSBS. PROTOCOL REGISTRATION: http://www. CLINICALTRIALS: gov, ID: NCT05808062.

A system for automatic classification of endodontic treatment quality in CBCT.

OBJECTIVES: An evaluation of the effectiveness of a new computational system proposed for automatic classification, developed based on a Siamese network combined with Convolutional Neural Networks (CNNs), is presented. It aims to identify endodontic technical errors using Cone Beam Computed Tomography (CBCT). The study also aims to compare the performance of the automatic classification system with that of dentists. METHODS: One thousand endodontically treated maxillary molars sagittal and coronal reconstructions were evaluated for the quality of the endodontic treatment and the presence of periapical hypodensities by three board-certified dentists and by an oral and maxillofacial radiologist. The proposed classification system was based on a Siamese network combined with EfficientNet B1 or EfficientNet B7 networks. Accuracy, sensivity, precision, specificity, and F1-score values were calculated for automated artificial systems and dentists. Chi-square tests were performed. RESULTS: The performances were obtained for EfficienteNet B1, EfficientNet B7 and dentists. Regarding accuracy, sensivity and specificity, the best results were obtained with EfficientNet B1. Concerning precision and F1-score, the best results were obtained with EfficientNet B7. The presence of periapical hypodensity lesions was associated with endodontic technical errors. In contrast, the absence of endodontic technical errors was associated with the absence of hypodensity. CONCLUSIONS: Quality evaluation of the endodontic treatment performed by dentists and by Siamese Network combined with EfficientNet B7 or EfficientNet B1 networks was comparable with a slight superiority for the Siamese Network. CLINICAL RELEVANCE: CNNs have the potential to be used as a support and standardization tool in assessing endodontic treatment quality in clinical practice.

Assessment of dental students' knowledge and performance of master gutta-percha cone selection and fitting during root canal treatment: a pilot study.

BACKGROUND: Misconceptions should be detected early in dental students' training to improve their clinical performance. Accordingly, this study aimed to assess undergraduate dental students' knowledge and performance of master gutta-percha (GP) cone selection and fitting during clinical endodontic courses at the College of Dentistry, King Saud University. METHODS: Ninety-nine undergraduate dental students completed an online survey about their knowledge of master GP cone selection. Forty-five of these students were observed by faculty members in clinical endodontic courses while they fitted master GP cones during root canal treatments. The observers recorded the details of each student's cone-fitting techniques. The data were analysed using t-tests, one-way analysis of variance, and chi-square tests (p < 0.05). Inter- and intra-observer reliability were tested using Fliess' Kappa. RESULTS SURVEY: All participants had good knowledge of over-extended cone management, while 80.8% knew how to properly manage a short cone. The proper flaring assessment method was selected by 86.9% of the female and 34.2% of the male students, and this difference was statistically significant (p = 0.0001). OBSERVATION: The students labelled the working length on the master GP cone with an indentation in 64.4% of the cases and by bending the cone 35.6% of the time. Of all students, 84.4% encountered an apical stop, and this rate correlated significantly with the length of the cone on the master apical cone radiograph (p = 0.001). Improper shaping of the canal was the most common cause of ill-fitting cones (83.3%), while 16.7% of the students chose the wrong cone size. The final obturation length was adequate in 80% of the cases; 57.8% of the students were helped by instructors. CONCLUSIONS: Most students had the basic knowledge required to solve problems related to the selection of master GP cones. However, in the clinical setting, more than half of the students required the assistance of an instructor to adjust their cone's fit. The presence of an apical stop had the most significant effect on the length of the fitted master GP cone on radiography. The most common cause of ill-fitting master cones was improper shaping of the canal.

Postoperative pain of minimally invasive root canal treatment:a randomized clinical trial.

This randomized clinical trial compared postoperative pain between a minimally invasive (MP) and conventional root canal treatment protocol (CP). A total of 170 mature permanent teeth (either with vital or necrotic pulp), were randomly assigned into two groups. In the CP group, ProTaper Gold (Dentsply Sirona, Ballaigues, Switzerland) and a continuous wave of condensation technique were used, whereas, in the MP group, TruNatomy (Dentsply Sirona), ultrasonic-assisted irrigation (UI), calcium hydroxide, and a sealer-based obturation technique were used. Patients recorded preoperative and postoperative pain using a 0-10 numerical rating scale (NRS) at 4 h, 1, 2, 3, 4, 5, 6, and 7 days after instrumentation and 1 day after canal obturation, respectively. There were no significant differences in pain intensity at any time points assessed between the two groups (p > 0.05). The occurrence of moderate/intense pain after instrumentation was significantly associated with preoperative periapical index (PAI) (p = 0.017) and NRS scores (p < 0.001). Preoperative pulp status (p = 0.009) and NRS score (p = 0.006) were identified as significant factors in the occurrence of moderate/intense pain after obturation. Instrumentation unequivocally reduced pain severity for both groups. The post-endodontic pain associated with the use of MP, combined with UI, Ca(OH)2, and calcium-silicate cement, did not differ from that of CP. Preoperative pain score, PAI, and preoperative pulp status were determined to be prognostic factors for postoperative pain.

Reducing apical voids for intra-canal sealer injection using a modified passive deflation needle.

The aim of the study was to evaluate the ability of a modified passive deflation needle to reduce the apical voids during the intra-canal iRoot SP sealer injection. A modified passive deflation injection needle was designed. Forty 20°-curved and twenty S-shaped single-canal resin block models were allocated into six groups. Each group was mechanically prepared to #25/04 or #25/06 file; then the root canals were injected with iRoot SP sealer using a modified needle or a normal plastic needle. Radiographs were taken to measure the length of apical void in each specimen. Similarly, twenty single-canal extracted premolars were collected and randomly divided into four groups. Each group was prepared to #25/04 or #25/06 file; then the root canals were injected with iRoot SP sealer using a modified needle or a normal plastic needle. Roots were then scanned using micro-computed tomography (micro-CT), and the volume of voids in root canals was analyzed and compared among groups. Statistical analysis demonstrated that the length and the volumetric percentage of voids were much lower in the modified needle group in both resin block root canal models and extract teeth than the normal plastic needle group (P < 0.05). The modified passive deflation needle can efficiently reduce apical voids during the intra-canal iRoot SP sealer injection.

Effect of heat application on the physicochemical properties of new endodontic sealers: an in vitro and SEM study.

Understanding the properties of endodontic sealers is vital for treatment planning. Calcium silicate-based sealers are important in modern endodontics. This study investigates the effect of heat on the physicochemical properties of new calcium silicate sealers, addressing concerns raised by clinicians seeking to combine their benefits with the gutta-percha obturation technique. Five endodontic sealers (AH Plus Bioceramic®, Total Fill® BC®, One-fil® Bioceramic, K-Biocer, Any-seal®) were evaluated. Each sealer (n = 16/group) was either kept at 37 °C or subjected to heat at 60 or 200 °C for 30 s. ISO 6876-2012 standards were used to measure setting time, flow, film thickness, and dimensional changes over time. SEM and EDS were utilized for surface and chemical analysis. Data analysis employed IBM SPSS Statistics version 26 with a 5% significance level for two-sided tests. The sealers' setting times were shortened by heat, except for Total Fill® BC with extended setting time. All sealers had significantly longer setting times than manufacturer specifications. Film thickness increased with temperature, while flow values decreased. K-Biocer sealer showed the highest flow (16.89 ± 0.57 mm) at 200 °C, while Total Fill® sealer had the lowest (15.32 ± 0.62 mm). Shrinkage was significant at 60 °C and 200 °C, with greater shrinkage at 200 °C. Heat caused surface deformations in all sealers. The 200 °C groups exhibited more voids in AH Plus Bioceramic®, Any-seal®, and One-fil® sealers, and higher void area in Total Fill®, One-fil®, and K-Biocer sealers (p value < 0.001). EDX analysis confirmed heat-induced chemical and elemental changes in all tested sealers. Elevated temperature affects the physicochemical properties and structure of the tested endodontic sealers. The consideration of endodontic sealer compatibility is essential when warm gutta-percha obturation techniques are used.

A novel simplified approach for endodontic retrograde surgery in short single-rooted teeth.

BACKGROUND: High technical thresholds, long operative times, and the need for expensive and specialized equipment impede the widespread adoption of endodontic microsurgery in many developing countries. This study aimed to compare the effects of a simplified, cost-effective, and time-efficient surgical approach involving orthograde obturation using biological ceramic material greater than 6 mm combined with apicoectomy for single-rooted teeth with short lengths with those of the conventional and current standard methods. MATERIALS AND METHODS: Forty-five premolars equally categorized into three groups: conventional surgery group, standard surgery group, and modified surgery group. A µCT scan was used to calculate the volume of voids. A micro-leakage test and scanning electron microscope (SEM) were performed to assess the sealing effect. Additionally, four cases of chronic periapical periodontitis in the anterior region were selected, and the patients received either the modified approach or the standard surgery for endodontic microsurgery. RESULTS: The volumes of voids in the apical 0-3 mm of the modified group and the standard group were comparable. The micro-leakage test and SEM examination demonstrated closely bonded fillings in the dentinal walls in both the modified surgery group and standard surgery group. The outcomes of the preliminary application of this modified procedure on patients were successful at the time of the follow-up cutoff. CONCLUSIONS: The modified surgery group exhibited similar root canal filling and apical sealing abilities with the standard procedure for single-rooted teeth with short lengths (< 20 mm). The preliminary application of this modified surgical procedure achieved favorable results.

Micro-computed tomographic evaluation on the quality of single-cone obturation using a modified passive-deflation sealer injection needle: an in vitro study.

OBJECTIVES: This study aimed to design a modified passive-deflation sealer injection needle and investigate its ability to improve obturation quality of single-cone technique through assessing the distribution of voids in root canals using micro-computed tomography (micro-CT). MATERIALS AND METHODS: Forty-eight mandibular incisors were divided into eight groups (n = 6), according to the taper of root canal preparation (0.06 or 0.04), the needle used for sealer injection (modified or commercial iRoot SP injection needle), and the obturation method (iRoot SP sealer-only or single-cone obturation). After obturation, each specimen was scanned by micro-CT. The volumetric percentage and distribution of all voids were first analyzed and compared among groups, then the open and closed voids were separately analyzed and compared among single-cone obturation groups. RESULTS: Compared to commercial needle groups, modified needle groups showed much less voids, especially in the apical root canal part (P < 0.05). Besides, the modified needle groups produced much less open voids than commercial needle groups despite the root canal taper (P < 0.05). CONCLUSIONS: The modified passive deflation sealer injection needle could effectively improve the quality of single-cone obturation through reducing intra-canal voids, especially open voids throughout the root canal, thus might possibly be developed as an effective intra-canal sealer delivering instrument.

Mineral trioxide aggregate obturation quality with two obturation techniques in severe curved root canals - a micro-CT study.

BACKGROUND: The existence of voids within the mineral trioxide aggregate (MTA) composition is one of the factors that can influence the treatment outcome. The primary objective of this study was to quantitatively assess and compare the MTA orthograde obturation quality in severe curved root canals using two different MTA compaction techniques: manual compaction with K-file, or Auger technique using micro-computed tomography (micro-CT) imaging. METHODS: For this study, 26 mandibular first molar teeth with severely curved mesiobuccal root canals were selected. These samples were randomly divided into two groups. All root canals were instrumented using ProTaper Gold rotary files up to the F3 file at the working length. In one group, OrthoMTA was compacted using a stainless steel K-file, while in the other group, the Auger technique was employed for compaction into the root canals. Once the MTA had completely set, the filled root canals were subjected to scanning using a high-resolution micro-CT scanner. The porosity volume was determined as a percentage in relation to the overal volume of the canal, and the collected data were subjected to analysis using SPSS software, with the significance level set at P < 0.05. RESULTS: The two techniques had no significant difference in open, closed, and total mean porosity. In both groups, the mean of open porosity was significantly more than closed porosity. CONCLUSIONS: According to the results of the present study, neither of these two techniques is preferred to the other, and factors such as working time, etc., can be considered to choose the more appropriate clinical technique.

Quality of different obturation techniques to fill perforating internal root resorption: a micro-computed tomographic study.

BACKGROUND: This study aimed to assess the quality of various obturation techniques to fill perforation caused by internal root resorption using Micro-computed Tomography. METHODS: Cone-beam computed tomography images of a maxillary central incisor tooth with perforating internal resorptive defect were used to create a 3D printed model of the affected tooth. The replicas were divided into four groups based on the obturation technique used. The techniques included Group 1: a polydimethylsiloxane-based sealer (GuttaFlow-2) with gutta-percha. Group 2: same as Group 1 except for using a pre-mixed Bioceramic-based sealer (NeoSEALER Flo). Group 3: the defect was filled entirely using the NeoSealer Flo Bioceramic-based sealer. Group 4: the samples were obturated using the warm vertical compaction technique with a resin-based sealer (ADSeal). The resin models were then scanned a micro-computed scanner to evaluate the percentage of voids in each group. RESULTS: The results showed that NeoSEALER Flo groups had significantly the highest volume of voids while GuttaFlow-2 and warm vertical compaction groups had the lowest void volume. CONCLUSIONS: GuttaFlow-2 and warm vertical compaction techniques performed best in filling the internal resorptive defect.

[Sealing effect of GuttaFlow2 in curved root canals].

OBJECTIVE: To evaluate the sealing ability of GuttaFlow2 single cone obturation in curved root canals. METHODS: (1) Slight, moderate and severe curved 3D printed root canals were made. After instrumentation, these samples were randomly divided into 2 groups (n = 10) according to different root canal filling techniques: GuttaFlow2 single cone group (GF2) and AH-Plus warm vertical compation group (WVC). All the samples were sectioned at 2 mm to apex (the apical of the root), 4 mm, 6 mm to apex (the middle of the root) and 8 mm to apex (the coronal of the root). The filling void areas were observed by stereomicroscope, and the percentages of void areas in each section were calculated by ImageJ 1.52a. (2) Forty-eight roots of extracted adult molars were selected. After instrumentation, they were randomly divided into 2 groups (n = 8): GF2 group and WVC group. Before root canal filling, the sea-lers were mixed with Rhodamine B dye for visualization under confocal laser scanning microscope. All samples were sectioned at 2 mm to apex (the apical of the root), 5 mm to apex (the middle of the root) and 8 mm to apex(the coronal of the root). Then, the percentages of sealer penetration into dentinal tubules in each section were calculated. RESULTS: At the apical of the root, there were no obvious voids in slight, moderate and severe curved canals in the GF2 group and the WVC group. There was no significant difference between the two groups (P > 0.05). At the middle of the root, there was no significant difference in the percentages of void areas between the two filling methods, but at the coronal of the root, there were more voids in the slight curved root canal in the GF2 group than in the WVC group, and the difference was significant (P = 0.009). The percentages of sealer penetration into dentinal tubules of slight, moderate and severe curved root canals in the GF2 group were 36.10%, 55.80%, 65.08%, respectively. And they were all higher than those in the WVC group (15.78%, 20.70%, 15.61%), respectively, the difference between the two groups was significant (P = 0.001). At the middle of the root, the percentages of sealer penetration into dentinal tubules of slight and moderate curved root canals in GF2 group were also significantly higher than those in the WVC group (P = 0.001). At the coronal of the root, there was no significant difference between the two groups (P > 0.05). CONCLUSION: GuttaFlow2 filling technique has the same sealing effect on the root canal at the apical and middle of the root as the warm vertical technique, but has a better sealing effect on the dentin tubules, especially for severe curved root canal.

Maxillary interim obturator prosthesis fabrication for a patient with limited mouth opening with a digital approach: A clinical report.

Squamous cell carcinoma is a common malignant condition affecting the oral cavity and may involve the surrounding maxillofacial regions. Treatment commonly involves resection of the tumor, followed by prosthetic rehabilitation of the resection defect. This clinical report presents a 62-year-old Asian male patient who had previously undergone surgical resection, resulting in a post-surgical Aramany Class II maxillary defect. The patient's medical history included severe trismus, characterized by restricted mouth opening, as well as a diagnosis of maxillary sinus verrucous squamous cell carcinoma. This report provides a comprehensive account of the rapid fabrication of an interim obturator using digitally assisted dentistry techniques.

Effects of Access Cavity Design and Placement Techniques on Mineral Trioxide Aggregate Obturation Quality in Simulated Immature Teeth: A Micro-Computed Tomography Study.

Background and Objectives: In teeth with open apices, performing single session apexification is a challenging treatment due to the difficulty in handling mineral trioxide aggregate (MTA). Minimally invasive approaches in dentistry have also influenced the cavity designs in endodontics. Until now, different techniques have not been investigated in addition to manual condensation during the process of placing MTA in traditional (TradACs) or conservative (ConsACs) endodontic access cavities. The aim of this in vitro study was to compare and evaluate the obturation quality of MTA apical plugs placed with different techniques in TradACs or ConsACs. Materials and Methods: Sixty upper central teeth were divided into two main groups based on cavity design, and then each main group was further divided into three subgroups according to MTA placement techniques (n = 10): TradAC-manual, TradAC-manual + indirect ultrasonic activation, TradAC-manual + XP-endo Shaper (XPS), ConsAC-manual, ConsAC-manual + indirect ultrasonic activation, and ConsAC-manual + XPS. Subsequently, the porosity percentages in the MTA apical plug were analyzed using micro-computed tomography. The statistical analysis was performed using the Kruskal-Wallis H test and Mann-Whitney U test. Statistical significance was set at p < 0.05. Results: There were differences in volume of porosity percentages (%) according to cavity designs and MTA application techniques (p < 0.05). Except for the XPS group, more porosity was observed in ConsACs compared to TradACs. In TradACs, the significantly lowest open and total porosity was observed in the manual, ultrasonic, and XPS techniques, respectively. In ConsACs, the significantly lowest porosity was observed in the manual, XPS, and ultrasonic techniques, respectively (p < 0.05). Conclusions: In MTA obturation, cavity designs and application techniques had an impact on the MTA porosity. Creating an apical plug in ConsACs may result in more porosity compared to TradACs, especially when manual or indirect ultrasonic activation is preferred. Opting for the manual technique alone may be considered sufficient for controlling porosity for both TradACs and ConsACs.

Effectiveness of root canal filling materials and techniques for treatment of apical periodontitis: A systematic review.

BACKGROUND: Apical periodontitis (AP) is an inflammatory disease of the apical periodontium as sequelae of pulp death. It is managed by disinfection and filling of the root canal space. OBJECTIVES: The aim of this systematic review was to investigate whether obturation techniques and materials used for root canal filling led to the management of AP. METHODS: A systematic review protocol was written following the preferred reporting items for systematic reviews and meta-analyses (PRISMA) checklist and registered on the international prospective register of systematic reviews (PROSPERO; CRD42021260275) including two populations, interventions, comparisons, outcomes and time (PICOT) for the research questions querying the effectiveness of obturation techniques (PICOT 1) and materials (PICOT 2) for the management of AP. Electronic searches were conducted on PubMed, ScienceDirect, Scopus and Embase search engines. Searches on International Endodontic Journal, Journal of Endodontics, Clinical Oral Investigations, Journal of Dental Research and Journal of Dentistry websites were also conducted, until May 2021. Both primary (tooth survival) and secondary outcomes were evaluated. The risk of bias was assessed by Cochrane RoB2 for the randomized and ROBINS-I for the nonrandomized trials. RESULTS: The search strategy identified 1652 studies, with 1600 excluded on the title and abstract screening, leaving 52 studies for full-text screening. In total, 10 studies met the inclusion criteria. The obturation technique and materials used did not affect the outcome of AP. Vertical compaction resulted in faster resolution of periapical lesions. The oral health-related quality of life of patients treated with lateral condensation exhibited poorer outcomes compared with single matched cone after 6 months of recall. DISCUSSION: The inclusion and exclusion criteria used for this systematic review enabled the capture of all the literature available on the effect of obturation techniques and materials on the outcome of AP. The data were heterogenous, and a number of articles investigating obturation techniques had no information on the materials and techniques used as they looked at the quality of fill. CONCLUSIONS: Included studies did not find any difference between different procedures (PICOT 1) and materials (PICOT 2). The risk of bias was high, thus the findings should be interpreted with caution. REGISTRATION: PROSPERO registration number: CRD42021260275.

The effect of two different root canal sealers on treatment outcome and post-obturation pain in single-visit root canal treatment: A prospective randomized clinical trial.

AIM: This randomized clinical trial aimed to evaluate and compare the effect of mineral trioxide aggregate (MTA)-based bioceramic- and resin-based sealers on the incidence and intensity of post-obturation pain and treatment outcome in asymptomatic vital molar teeth in single-visit root canal treatment. METHODOLOGY: One hundred asymptomatic mandibular molar teeth with vital pulp were randomly assigned into two groups according to the sealer used: MTA Fillapex or AH Plus sealer. WaveOne Gold instruments were used for root canal preparations. Root canals were obturated with WaveOne Gold gutta-percha cones corresponding in size and taper to the last instrument used. MTA Fillapex was used in the first group and AH Plus was used in the second group as the root canal sealer. The effects of age, gender, tooth types and the level of root canal filling on the treatment outcome were evaluated after 1 and 2 years. Postoperative pain at 6, 12, 24, 48, 72 h, 4, 5, 6, 7 and 30 days after root canal treatment was measured with the Numerical Rating Scale. Chi-square test was used for the treatment outcome and Mann-Whitney U, chi-Square and Spearman correlation analyses were used for postoperative pain. α = .05 was the level of significance. RESULTS: Twelve patients did not complete the 2-year follow-up and the study finished with 88 patients. In the MTA Fillapex group 41 correct, one short, two extruded, and in the AH Plus group 40 correct, one short and three extruded root canal fillings were detected. No significant differences were observed between the first- and second-year treatment outcomes between the groups (p > .05).There was no association between age, gender, tooth number, root canal filling length and the treatment success in all evaluated teeth (p > .05). The differences between the groups in terms of postoperative pain incidence and intensity at all time-points were not significant (p > .05). There was no correlation between the age and postoperative pain (p > .05), but pain was statistically higher in women (p < .05). CONCLUSIONS: Mineral trioxide aggregate Fillapex showed similar success rate and post-obturation pain incidence and intensity as AH Plus sealer and can be used as a root canal sealer in asymptomatic mandibular molars with irreversible pulpitis.

Marginal gaps and voids using two warm compaction techniques and different sealers: a micro-CT study.

OBJECTIVE: To assess the percentage of marginal gaps and voids in oval-shaped canals obturated by using two warm compaction techniques with a Bio-C sealer and AH Plus Jet. MATERIALS AND METHODS: Forty canines with oval canals were scanned by microcomputed tomography (micro-CT), and root canal preparation was performed with an XP-endo Shaper system and irrigated with 5.25% sodium hypochlorite. Then, the specimens were paired into four groups (n=10) according to the root canal filling technique and endodontic sealer: Bio-C sealer and continuous wave of condensation, Bio-C sealer and Tagger's hybrid, AH Plus Jet and continuous wave of condensation, and AH Plus Jet and Tagger's hybrid. After root canal filling, a new scan was performed. The percentage of marginal gaps and voids was calculated with the ImageJ software, and the data were analyzed statistically using two-way ANOVA and Tukey tests, with a significance level of 5%. RESULTS: The percentage of marginal gaps was significantly lower in the Bio-C sealer than in AH Plus Jet (p=0.021) regardless of the technique. However, no difference was found in the percentage of voids between root canal filling techniques and the endodontic sealer (p>0.05). CONCLUSION: Both sealers and techniques demonstrated good quality of root canal filling. However, the use of the Bio-C sealer enhanced the filling ability by reducing marginal gaps, regardless of the root canal filling technique. CLINICAL RELEVANCE: This study highlights the better performance of the Bio-C sealer in the quality of the root canal filling, reducing marginal gaps when compared to AH Plus Jet independent of the technique.