A comparison of Bayesian and score methods for interval estimates of positive/negative likelihood ratios in support of diagnostic device performance evaluation.

BACKGROUND: Positive and negative likelihood ratios (PLR and NLR) are important metrics of accuracy for diagnostic devices with a binary output. However, the properties of Bayesian and frequentist interval estimators of PLR/NLR have not been extensively studied and compared. In this study, we explore the potential use of the Bayesian method for interval estimation of PLR/NLR, and, more broadly, for interval estimation of the ratio of two independent proportions. METHODS: We develop a Bayesian-based approach for interval estimation of PLR/NLR for use as a part of a diagnostic device performance evaluation. Our approach is applicable to a broader setting for interval estimation of any ratio of two independent proportions. We compare score and Bayesian interval estimators for the ratio of two proportions in terms of the coverage probability (CP) and expected interval width (EW) via extensive experiments and applications to two case studies. A supplementary experiment was also conducted to assess the performance of the proposed exact Bayesian method under different priors. RESULTS: Our experimental results show that the overall mean CP for Bayesian interval estimation is consistent with that for the score method (0.950 vs. 0.952), and the overall mean EW for Bayesian is shorter than that for score method (15.929 vs. 19.724). Application to two case studies showed that the intervals estimated using the Bayesian and frequentist approaches are very similar. DISCUSSION: Our numerical results indicate that the proposed Bayesian approach has a comparable CP performance with the score method while yielding higher precision (i.e. a shorter EW).

A novel estimator for the two-way partial AUC.

BACKGROUND: The two-way partial AUC has been recently proposed as a way to directly quantify partial area under the ROC curve with simultaneous restrictions on the sensitivity and specificity ranges of diagnostic tests or classifiers. The metric, as originally implemented in the tpAUC R package, is estimated using a nonparametric estimator based on a trimmed Mann-Whitney U-statistic, which becomes computationally expensive in large sample sizes. (Its computational complexity is of order [Formula: see text], where [Formula: see text] and [Formula: see text] represent the number of positive and negative cases, respectively). This is problematic since the statistical methodology for comparing estimates generated from alternative diagnostic tests/classifiers relies on bootstrapping resampling and requires repeated computations of the estimator on a large number of bootstrap samples. METHODS: By leveraging the graphical and probabilistic representations of the AUC, partial AUCs, and two-way partial AUC, we derive a novel estimator for the two-way partial AUC, which can be directly computed from the output of any software able to compute AUC and partial AUCs. We implemented our estimator using the computationally efficient pROC R package, which leverages a nonparametric approach using the trapezoidal rule for the computation of AUC and partial AUC scores. (Its computational complexity is of order [Formula: see text], where [Formula: see text].). We compare the empirical bias and computation time of the proposed estimator against the original estimator provided in the tpAUC package in a series of simulation studies and on two real datasets. RESULTS: Our estimator tended to be less biased than the original estimator based on the trimmed Mann-Whitney U-statistic across all experiments (and showed considerably less bias in the experiments based on small sample sizes). But, most importantly, because the computational complexity of the proposed estimator is of order [Formula: see text], rather than [Formula: see text], it is much faster to compute when sample sizes are large. CONCLUSIONS: The proposed estimator provides an improvement for the computation of two-way partial AUC, and allows the comparison of diagnostic tests/machine learning classifiers in large datasets where repeated computations of the original estimator on bootstrap samples become too expensive to compute.

Attention Horizon as a Predictor for the Fuel Consumption Rate of Drivers.

Understanding the operation of complex assets such heavy-duty vehicles is essential for improving the efficiency, sustainability, and safety of future industry. Specifically, reducing energy consumption of transportation is crucially important for fleet operators, due to the impact it has on decreasing energy costs and lowering greenhouse gas emissions. Drivers have a high influence on fuel usage. However, reliably estimating driver performance is challenging. This is a key component of many eco-driving tools used to train drivers. Some key aspects of good, or efficient, drivers include being more aware of the surroundings, adapting to the road situations, and anticipating likely developments of the traffic conditions. With the development of IoT technologies and possibility of collecting high-precision and high-frequency data, even such vague concepts can be qualitatively measured, or at least approximated. In this paper, we demonstrate how the driver's degree of attention to the road can be automatically extracted from onboard sensor data. More specifically, our main contribution is introduction of a new metric, called attention horizon (AH); it can, fully automatically and based on readily-available IoT data, capture, differentiate, and evaluate a driver's behavior as the vehicle approaches a red traffic light. We suggest that our measure encapsulates complex concepts such as driver's "awareness" and "carefulness" in itself. This metric is extracted from the pedal positions in a 150 m trajectory just before stopping. We demonstrate that this metric is correlated with normalized fuel consumption rate (FCR) in the long term, making it a suitable tool for ranking and evaluating drivers. For example, over weekly periods we found a negative median correlation between AH and FCR with the absolute value of 0.156; while using monthly data, the value was 0.402.

A Trade-Off Analysis between Sensor Quality and Data Intervals for Prognostics Performance.

In safety-critical systems such as industrial plants or aircraft, failure occurs inevitably during operation, and it is important to prevent it in order to maintain high availability. To reduce this risk, a lot of efforts are directed from developing sensing technologies to failure prognosis algorithms to enable predictive maintenance. The success of effective and reliable predictive maintenance not only relies on robust prognosis algorithms but also on the selection of sensors or data acquisition strategy. However, there are not many in-depth studies on a trade-off between sensor quality and data storage in the view of prognosis performance. The information about (1) how often data should be measured and (2) how good sensor quality should be for reliable failure prediction can be highly impactful for practitioners. In this paper, the authors evaluate the efficacy of the two factors in terms of remaining useful life (RUL) prediction accuracy and its uncertainty. In addition, since knowing true degradation information is almost impossible in practice, the authors validated the use of the prognosis metric without requiring the true degradation information. A numerical case study is conducted to identify the relationship between sensor quality and data storage. Then, real bearing run-to-failure (RTF) datasets acquired from accelerometer (contact type) and microphone (non-contact type) sensors are evaluated based on the prognosis performance metric and compared in terms of the sensors' cost-effectiveness for predictive maintenance.

Using Patient Experience Survey Data to Improve In-Center Hemodialysis Care: A Practical Review.

Patient experience is an integral aspect of the care we deliver to our dialysis patients. Standardized evaluation of patient experience with in-center hemodialysis started in the United States in 2012 with the In-Center Hemodialysis Consumer Assessment of Healthcare Providers and Systems (ICH CAHPS) survey. Over time there have been a few changes to this survey, how it is administered, and how it fits within the Centers for Medicare & Medicaid Services End-Stage Renal Disease Quality Incentive Program. Although the importance of this survey has been growing, knowledge of this survey among nephrologists has lagged. We provide a review of the survey development and how its use has evolved since 2012. We discuss in detail research done on this survey to date, including survey psychometric evaluation. We highlight gaps in our knowledge that need further research and end with general recommendations to improve patient experience within hemodialysis facilities, which we believe is a worthy goal for all members of the dialysis team.

Improved ECG Watermarking Technique Using Curvelet Transform.

Hiding data in electrocardiogram signals are a big challenge due to the embedded information that can hamper the accuracy of disease detection. On the other hand, hiding data into ECG signals provides more security for, and authenticity of, the patient's data. Some recent studies used non-blind watermarking techniques to embed patient information and data of a patient into ECG signals. However, these techniques are not robust against attacks with noise and show a low performance in terms of parameters such as peak signal to noise ratio (PSNR), normalized correlation (NC), mean square error (MSE), percentage residual difference (PRD), bit error rate (BER), structure similarity index measure (SSIM). In this study, an improved blind ECG-watermarking technique is proposed to embed the information of the patient's data into the ECG signals using curvelet transform. The Euclidean distance between every two curvelet coefficients was computed to cluster the curvelet coefficients and after this, data were embedded into the selected clusters. This was an improvement not only in terms of extracting a hidden message from the watermarked ECG signals, but also robust against image-processing attacks. Performance metrics of SSIM, NC, PSNR and BER were used to measure the superiority of presented work. KL divergence and PRD were also used to reveal data hiding in curvelet coefficients of ECG without disturbing the original signal. The simulation results also demonstrated that the clustering method in the curvelet domain provided the best performance-even when the hidden messages were large size.

Cancer Detection Rate and Abnormal Interpretation Rate of Prostate MRI in Patients With Low-Grade Cancer.

PURPOSE: The aim of this study was to evaluate the utility of cancer detection rate (CDR) and abnormal interpretation rate (AIR) in prostate MRI for patients with low-grade prostate cancer (PCa). METHODS: This three-center retrospective study included patients who underwent prostate MRI from 2017 to 2021 with known low-grade PCa (Gleason score 6) without prior treatment. Patient-level highest Prostate Imaging Reporting & Data System (PI-RADS®) score and pathologic diagnosis within 1 year after MRI were used to evaluate the diagnostic performance of prostate MRI in detecting clinically significant PCa (csPCa; Gleason score ≥ 7). The metrics AIR, CDR, and CDR adjusted for pathologic confirmation rate were calculated. Radiologist-level AIR-CDR plots were shown. Simulation AIR-CDR lines were created to assess the effects of different diagnostic performances of prostate MRI and the prevalence of csPCa. RESULTS: A total of 3,207 examinations were interpreted by 33 radiologists. Overall AIR, CDR, and CDR adjusted for pathologic confirmation rate at PI-RADS 3 to 5 (PI-RADS 4 and 5) were 51.7% (36.5%), 22.1% (18.8%), and 30.7% (24.6%), respectively. Radiologist-level AIR and CDR at PI-RADS 3 to 5 (PI-RADS 4 and 5) were in the 36.8% to 75.6% (21.9%-57.5%) range and the 16.3%-28.7% (10.9%-26.5%) range, respectively. In the simulation, changing parameters of diagnostic performance or csPCa prevalence shifted the AIR-CDR line. CONCLUSIONS: The authors propose CDR and AIR as performance metrics in prostate MRI and report reference performance values in patients with known low-grade PCa. There was variability in radiologist-level AIR and CDR. Combined use of AIR and CDR could provide meaningful feedback for radiologists to improve their performance by showing relative performance to other radiologists.

Cancer Detection Rate and Abnormal Interpretation Rate of Prostate MRI Performed for Clinical Suspicion of Prostate Cancer.

PURPOSE: To report cancer detection rate (CDR) and abnormal interpretation rate (AIR) in prostate MRI performed for clinical suspicion of prostate cancer (PCa). MATERIALS AND METHODS: This retrospective single-institution, three-center study included patients who underwent MRI for clinical suspicion of PCa between 2017 and 2021. Patients with known PCa were excluded. Patient-level Prostate Imaging-Reporting and Data System (PI-RADS) score was extracted from the radiology report. AIR was defined as number of abnormal MRI (PI-RADS score 3-5) / total number of MRIs. CDR was defined as number of clinically significant PCa (csPCa: Gleason score ≥7) detected at abnormal MRI / total number of MRI. AIR, CDR, and CDR adjusted for pathology confirmation rate were calculated for each of three centers and pre-MRI biopsy status (biopsy-naive and previous negative biopsy). RESULTS: A total of 9,686 examinations (8,643 unique patients) were included. AIR, CDR, and CDR adjusted for pathology confirmation rate were 45.4%, 23.8%, and 27.6% for center I; 47.2%, 20.0%, and 22.8% for center II; and 42.3%, 27.2%, and 30.1% for center III, respectively. Pathology confirmation rate ranged from 81.6% to 88.0% across three centers. AIR and CDR for biopsy-naive patients were 45.5% to 52.6% and 24.2% to 33.5% across three centers, respectively, and those for previous negative biopsy were 27.2% to 39.8% and 11.7% to 14.2% across three centers, respectively. CONCLUSION: We reported CDR and AIR in prostate MRI for clinical suspicion of PCa. CDR needs to be adjusted for pathology confirmation rate and pre-MRI biopsy status for interfacility comparison.

The receiver operating characteristic curve accurately assesses imbalanced datasets.

Many problems in biology require looking for a "needle in a haystack," corresponding to a binary classification where there are a few positives within a much larger set of negatives, which is referred to as a class imbalance. The receiver operating characteristic (ROC) curve and the associated area under the curve (AUC) have been reported as ill-suited to evaluate prediction performance on imbalanced problems where there is more interest in performance on the positive minority class, while the precision-recall (PR) curve is preferable. We show via simulation and a real case study that this is a misinterpretation of the difference between the ROC and PR spaces, showing that the ROC curve is robust to class imbalance, while the PR curve is highly sensitive to class imbalance. Furthermore, we show that class imbalance cannot be easily disentangled from classifier performance measured via PR-AUC.

Unveiling surgical expertise through machine learning in a novel VR/AR spinal simulator: A multilayered approach using transfer learning and connection weights analysis.

BACKGROUND: Virtual and augmented reality surgical simulators, integrated with machine learning, are becoming essential for training psychomotor skills, and analyzing surgical performance. Despite the promise of methods like the Connection Weights Algorithm, the small sample sizes (small number of participants (N)) typical of these trials challenge the generalizability and robustness of models. Approaches like data augmentation and transfer learning from models trained on similar surgical tasks address these limitations. OBJECTIVE: To demonstrate the efficacy of artificial neural network and transfer learning algorithms in evaluating virtual surgical performances, applied to a simulated oblique lateral lumbar interbody fusion technique in an augmented and virtual reality simulator. DESIGN: The study developed and integrated artificial neural network algorithms within a novel simulator platform, using data from the simulated tasks to generate 276 performance metrics across motion, safety, and efficiency. Innovatively, it applies transfer learning from a pre-trained ANN model developed for a similar spinal simulator, enhancing the training process, and addressing the challenge of small datasets. SETTING: Musculoskeletal Biomechanics Research Lab; Neurosurgical Simulation and Artificial Intelligence Learning Centre, McGill University, Montreal, Canada. PARTICIPANTS: Twenty-seven participants divided into 3 groups: 9 post-residents, 6 senior and 12 junior residents. RESULTS: Two models, a stand-alone model trained from scratch and another leveraging transfer learning, were trained on nine selected surgical metrics achieving 75 % and 87.5 % testing accuracy respectively. CONCLUSIONS: This study presents a novel blueprint for addressing limited datasets in surgical simulations through the strategic use of transfer learning and data augmentation. It also evaluates and reinforces the application of the Connection Weights Algorithm from our previous publication. Together, these methodologies not only enhance the precision of performance classification but also advance the validation of surgical training platforms.

Protecting human subjects participating in research.

OBJECTIVES: Institutions conducting research involving human subjects establish institutional review boards (IRBs) and/or human research protection programs to protect human research subjects. Our objectives were to develop performance metrics to measure human research subject protections and to assess how well IRBs and human research protection programs are protecting human research subjects. METHODS: A set of five performance metrics for measuring human research subject protections was developed and data were collected through annual audits of informed consent documents and human research protocols at 107 Department of Veterans Affairs research facilities from 2010 through 2021. RESULTS: The proposed performance metrics were: local adverse events that were serious, unanticipated, and related or probably related to research, including those that resulted in hospitalization or death; where required informed consent was not obtained; required Heath Insurance Portability and Accountability Act authorization was not obtained; non-exempt research was conducted without IRB approval; and research activities were continued during a lapse in IRB continuing reviews. Analysis of these performance metric data from 2010 through 2021 revealed that incident rates of all five performance metrics were very low; three showed a statistically significant trend of improvement ranging from 70% to 100%; and none of these five performance metrics deteriorated. CONCLUSIONS: Department of Veterans Affairs human research protection programs appeared to be effective in protecting human research subjects and showed improvement from 2010 through 2021. These proposed performance metrics will be useful in monitoring the effectiveness of human research protection programs in protecting human research subjects.

Prognostic significance of the Geriatric 8 score alone and included with genetic risk group in older adults with acute myeloid leukemia.

INTRODUCTION: As the numbers of older adult patients with acute myeloid leukemia (AML) continue to increase, the establishment of a simple geriatric assessment specifically for AML represents an unmet need. This study aimed to assess the impact of the Geriatric 8 (G8) score on overall survival (OS). MATERIALS AND METHODS: We retrospectively analyzed 100 patients ≥60 years old with newly diagnosed AML. RESULTS: Multivariate Cox modeling identified G8 score as a significant prognostic factor for OS (hazard ratio 0.891, 95% confidence interval [CI] 0.808-0.983). A linear association between G8 score and mortality risk was confirmed in a Cox model with restricted cubic spline. Multivariate receiver operating characteristic curves demonstrated a significant improvement in prediction ability when G8 score was added to cytogenetic risk group. The combination of G8 score and cytogenetic risk group yielded a significant continuous net reclassification improvement (0.718; 95%CI 0.353-1.082; P < 0.001). Decision curve analysis showed a clinical net benefit associated with adding G8 score to cytogenetic risk group. DISCUSSION: G8 score not only offered a strong prognostic factor for OS, but also markedly improved prediction accuracy for mortality when incorporated with cytogenetic risk group.

Determination of Friction Performance of High Friction Surface Treatment Based on Alternative Macrotexture Metric.

Surface friction is currently the most common metric for evaluating the performance of high friction surface treatment (HFST). However, friction test methods such as the locked wheel skid tester (LWST) commonly provide a spot measurement. Large variations may arise in the LWST testing on curves. Based on 21 actual HFST projects, a study was performed to use a macrotexture metric, i.e., the mean profile depth (MPD) to evaluate HFST's performance and improve its quality control (QC)/quality assurance (QA) procedures. The material properties were presented to understand the aspects of HFST. The method for calculating MPD was modified to account for the variations of macrotexture measurements. A vehicle-based test system was utilized to measure MPD periodically over an 18-month period since HFST installation. Statistical analysis was performed on the MPD measurements to identify the effects of influencing factors. Compared with the friction from LWST, MPD was equally effective in evaluating HFST performance. However, the use of MPD eliminated the errors as arisen in LWST testing and made it possible to detect surface distresses, including aggregate loss, delamination, and cracking. The expected overall MPD may be calculated by combining the MPD measurements made three months after installation at different HFST sites and used as a metric for evaluating HFST performance and QC/QA.

Adapting Highly-Dynamic Compliant Movements to Changing Environments: A Benchmark Comparison of Reflex- vs. CPG-Based Control Strategies.

To control highly-dynamic compliant motions such as running or hopping, vertebrates rely on reflexes and Central Pattern Generators (CPGs) as core strategies. However, decoding how much each strategy contributes to the control and how they are adjusted under different conditions is still a major challenge. To help solve this question, the present paper provides a comprehensive comparison of reflexes, CPGs and a commonly used combination of the two applied to a biomimetic robot. It leverages recent findings indicating that in mammals both control principles act within a low-dimensional control submanifold. This substantially reduces the search space of parameters and enables the quantifiable comparison of the different control strategies. The chosen metrics are motion stability and energy efficiency, both key aspects for the evolution of the central nervous system. We find that neither for stability nor energy efficiency it is favorable to apply the state-of-the-art approach of a continuously feedback-adapted CPG. In both aspects, a pure reflex is more effective, but the pure CPG allows easy signal alteration when needed. Additionally, the hardware experiments clearly show that the shape of a control signal has a strong influence on energy efficiency, while previous research usually only focused on frequency alignment. Both findings suggest that currently used methods to combine the advantages of reflexes and CPGs can be improved. In future research, possible combinations of the control strategies should be reconsidered, specifically including the modulation of the control signal's shape. For this endeavor, the presented setup provides a valuable benchmark framework to enable the quantitative comparison of different bioinspired control principles.

Prostate Imaging and Data Reporting System Version 2 as a Radiology Performance Metric: An Analysis of 18 Abdominal Radiologists.

PURPOSE: To determine expected trained provider performance dispersion in Prostate Imaging and Data Reporting System version 2 (PI-RADS v2) positive predictive values (PPVs). METHODS: This single-center quality assurance retrospective cohort study evaluated 5,556 consecutive prostate MRIs performed on 4,593 patients. Studies were prospectively interpreted from October 8, 2016, to July 31, 2020, by 18 subspecialty-trained abdominal radiologists (1-22 years' experience; median MRIs per radiologist: 232, first-to-third quartile range [Q1-Q3]: 128-440; 13 interpreted at least 30 MRIs with a reference standard). Maximum prospectively reported whole-gland PI-RADS v2 score was compared to post-MRI biopsy histopathology obtained within 2 years. The primary outcome was PPV of MRI by provider stratified by maximum whole-gland PI-RADS v2 score. RESULTS: Median provider-level PPVs for the radiologists who interpreted ≥30 MRIs with a reference standard were PI-RADS 3 (22.1%; Q1-Q3: 10.0%-28.6%), PI-RADS 4 (49.2%; Q1-Q3: 41.4%-50.0%), PI-RADS 5 (81.8%; Q1-Q3: 77.1%-84.4%). Overall, the maximum whole-gland PI-RADS v2 score was PI-RADS 1 to 2 (34.6% [1,925]), PI-RADS 3 (8.5% [474]), PI-RADS 4 (21.0% [1,166]), PI-RADS 5 (18.3% [1,018]), no PI-RADS score (17.5% [973]). System-level (all providers) PPVs for maximum PI-RADS v2 scores were 20.0% (95% confidence interval [CI]: 15.7%-24.9%) for PI-RADS 3, 48.5% (95% CI: 44.8%-52.2%) for PI-RADS 4, and 80.1% for PI-RADS 5 (95% CI: 75.7%-83.9%). CONCLUSION: Subspecialty-trained abdominal radiologists with a wide range of experience can obtain consistent positive predictive values for PI-RADS v2 scores of 3 to 5. These data can be used for quality assurance benchmarking.

County-Level Socioeconomic Status Adjustment of Acute Myocardial Infarction Mortality Hospital Performance Measure in the U.S.

The U.S. Centers for Medicare and Medicaid Services' (CMS's) Hospital Compare (HC) data provides a collection of risk-adjusted hospital performance metrics intended to allow comparison of hospital-provided care. However, CMS does not adjust for socioeconomic status (SES) factors, which have been found to be associated with disparate health outcomes. Associations between county-level SES factors and CMS's risk-adjusted 30-day acute myocardial infarction (AMI) mortality rates are explored for n = 2462 hospitals using a variety of sources for county-level SES information. Upon performing multiple imputation, a stepwise backward elimination model selection approach using Akaike's information criteria was used to identify the optimal model. The resulting model, comprised of 14 predictors mostly at the county level, provides an additional 8% explanatory power to capture the variability in 30-day risk-standardized AMI mortality rates, which already account for patient-level clinical differences. SES factors may be an important feature for inclusion in future risk-adjustment models, which will have system and policy implications for distributing resources to hospitals, such as reimbursements. It also serves as a stepping stone to identify and address long-standing SES-related inequities.

Utilizing a multilayer perceptron artificial neural network to assess a virtual reality surgical procedure.

BACKGROUND: Virtual reality surgical simulators are a safe and efficient technology for the assessment and training of surgical skills. Simulators allow trainees to improve specific surgical techniques in risk-free environments. Recently, machine learning has been coupled to simulators to classify performance. However, most studies fail to extract meaningful observations behind the classifications and the impact of specific surgical metrics on the performance. One benefit from integrating machine learning algorithms, such as Artificial Neural Networks, to simulators is the ability to extract novel insights into the composites of the surgical performance that differentiate levels of expertise. OBJECTIVE: This study aims to demonstrate the benefits of artificial neural network algorithms in assessing and analyzing virtual surgical performances. This study applies the algorithm on a virtual reality simulated annulus incision task during an anterior cervical discectomy and fusion scenario. DESIGN: An artificial neural network algorithm was developed and integrated. Participants performed the simulated surgical procedure on the Sim-Ortho simulator. Data extracted from the annulus incision task were extracted to generate 157 surgical performance metrics that spanned three categories (motion, safety, and efficiency). SETTING: Musculoskeletal Biomechanics Research Lab; Neurosurgical Simulation and Artificial Intelligence Learning Center, McGill University, Montreal, Canada. PARTICIPANTS: Twenty-three participants were recruited and divided into 3 groups: 11 post-residents, 5 senior and 7 junior residents. RESULTS: An artificial neural network model was trained on nine selected surgical metrics, spanning all three categories and achieved 80% testing accuracy. CONCLUSIONS: This study outlines the benefits of integrating artificial neural networks to virtual reality surgical simulators in understanding composites of expertise performance.

Performance Metrics for Slaughter and Dressing Hygiene at Australian Beef Export Establishments.

ABSTRACT: A study was undertaken to examine hygienic control of the slaughter and dressing process for beef cattle at Australian export processing establishments. Samples were collected from two points during the process: immediately after hide removal and at the completion of dressing before the commencement of chilling. Hindquarter and forequarter samples were collected from 24 establishments, half of which (n = 12) used some form of microbial intervention (in addition to trimming). The overall contamination level on carcass sides was low and was reduced between hide removal and entering the chiller. The concentration and prevalence of indicator bacteria were higher on samples from hindquarters than on samples from forequarters. Application of an intervention, such as hot water, in addition to trimming resulted in a greater reduction in the concentration and prevalence of indicator bacteria than trimming alone, although the level of Escherichia coli and coliform bacteria on all samples was too low to allow meaningful comparisons to be made. Salmonellae were isolated from 2.09 and 0.56% of samples after hide removal and before chilling, respectively. Application of an intervention in addition to trimming did not result in a significant reduction (P = 0.4) of Salmonella prevalence on prechill carcasses. Low levels of bacteria were found on carcasses after hide removal. This, combined with small reductions as a result of trimming and sometimes other interventions, resulted in carcasses with very low levels of bacterial contamination. If performance metrics were to be applied to the slaughter and dressing process, a measure of the expected contamination at the end of the process would provide a more unequivocal measure of the process than either contamination on the carcass after hide removal or any reduction achieved as a result of the dressing process.

Selective stimulation of rat sciatic nerve using an array of mm-size magnetic coils: a simulation study.

This work proposes and computationally investigate the use of magnetic neural stimulation as an alternative to electrical stimulation to achieve selective activation of rat sciatic nerve. In particular, they assess the effectiveness of an array of small coils to obtain selective neural stimulation, as compared to a single coil. Specifically, an array of four mm-sized coils is used to stimulate rat sciatic nerve, targeting the regions of fascicles that are associated with different muscles of the leg. To evaluate the selectivity of activation, a three-dimensional heterogeneous multi-resolution nerve model is implemented using the impedance method for the computation of the magnetic and electric fields in the nerve. The performance metric 'selectivity index' is defined that measures the recruitment of the targeted region compared to other non-targeted regions of the nerve. The selectivity index takes values between -1 (least selective) and 1 (most selective). For each targeted region, a selectivity index of 0.75 or better is predicted for the proposed array configuration. The results suggest that an array of coils can provide superior spatial control of the electric field induced in the neural tissue compared to traditional extraneural electrode arrays, thus opening the possibility to applications where selective neurostimulation is of interest.

Metrics for Performance Evaluation of Patient Exercises during Physical Therapy.

OBJECTIVE: The article proposes a set of metrics for evaluation of patient performance in physical therapy exercises. METHODS: Taxonomy is employed that classifies the metrics into quantitative and qualitative categories, based on the level of abstraction of the captured motion sequences. Further, the quantitative metrics are classified into model-less and model-based metrics, in reference to whether the evaluation employs the raw measurements of patient performed motions, or whether the evaluation is based on a mathematical model of the motions. The reviewed metrics include root-mean square distance, Kullback Leibler divergence, log-likelihood, heuristic consistency, Fugl-Meyer Assessment, and similar. RESULTS: The metrics are evaluated for a set of five human motions captured with a Kinect sensor. CONCLUSION: The metrics can potentially be integrated into a system that employs machine learning for modelling and assessment of the consistency of patient performance in home-based therapy setting. Automated performance evaluation can overcome the inherent subjectivity in human performed therapy assessment, and it can increase the adherence to prescribed therapy plans, and reduce healthcare costs.