Iron silicate perovskite and postperovskite in the deep lower mantle.

Ferromagnesian silicates are the dominant constituents of the Earth's mantle, which comprise more than 80% of our planet by volume. To interpret the low shear-velocity anomalies in the lower mantle, we need to construct a reliable transformation diagram of ferromagnesian silicates over a wide pressure-temperature (P-T) range. While MgSiO3 in the perovskite structure has been extensively studied due to its dominance on Earth, phase transformations of iron silicates under the lower mantle conditions remain unresolved. In this study, we have obtained an iron silicate phase in the perovskite (Pv) structure using synthetic fayalite (Fe2SiO4) as the starting material under P-T conditions of the lower mantle. Chemical analyses revealed an unexpectedly high Fe/Si ratio of 1.72(3) for the Pv phase in coexistence with metallic iron particles, indicating incorporation of about 25 mol% Fe2O3 in the Pv phase with an approximate chemical formula (Fe2+0.75Fe3+0.25)(Fe3+0.25Si0.75)O3. We further obtained an iron silicate phase in the postperovskite (PPv) structure above 95 GPa. The calculated curves of compressional (VP) and shear velocity (VS) of iron silicate Pv and PPv as a function of pressure are nearly parallel to those of MgSiO3, respectively. To the best of our knowledge, the iron silicate Pv and PPv are the densest phases among all the reported silicates stable at P-T conditions of the lower mantle. The high ferric iron content in the silicate phase and the spin-crossover of ferric iron at the Si-site above ~55 GPa should be taken into account in order to interpret the seismic observations. Our results would provide crucial information for constraining the geophysical and geochemical models of the lower mantle.

Diamond formation mechanism in chemical vapor deposition.

It is a key challenge to prepare large-area diamonds by using the methods of high-pressure high-temperature and normal chemical vapor deposition (CVD). The formation mechanism of thermodynamically metastable diamond compared to graphite in low-pressure CVD possibly implies a distinctive way to synthesize large-area diamonds, while it is an intriguing problem due to the limitation of in situ characterization in this complex growth environment. Here, we design a series of short-term growth on the margins of cauliflower-like nanocrystalline diamond particles, allowing us to clearly observe the diamond formation process. The results show that vertical graphene sheets and nanocrystalline diamonds alternatively appear, in which vertical graphene sheets evolve into long ribbons and graphite needles, and they finally transform into diamonds. A transition process from graphite (200) to diamond (110) verifies the transformation, and Ta atoms from hot filaments are found to atomically disperse in the films. First principle calculations confirm that Ta-added H- or O-terminated bilayer graphene spontaneously transforms into diamond. This reveals that in the H, O, and Ta complex atmosphere of the CVD environment, diamond is formed by phase transformation from graphite. This subverts the general knowledge that graphite is etched by hydrogen and sp3 carbon species pile up to form diamond and supplies a way to prepare large-area diamonds based on large-sized graphite under normal pressure. This also provides an angle to understand the growth mechanism of materials with sp2 and sp3 electronic configurations.

Origin for electrochemically driven phase transformation in the oxygen electrode for a solid oxide cell.

The next generation of fuel cells, electrolyzers, and batteries requires higher power, faster kinetics, and larger energy density, which necessitate the use of compositionally complex oxides to achieve multifunctionalities and activity. These compositionally complex oxides may change their phases and structures during an electrochemical process-a so-called "electrochemically driven phase transformation." The origin for such a phase change has remained obscure. The aim of this paper is to present an experimental study and a theoretical analysis of phase evolution in praseodymium nickelates. Nickelate-based electrodes show up to 60 times greater phase transformation during operation when compared with thermally annealed ones. Theoretical analysis suggests that the presence of a reduced oxygen partial pressure at the interface between the oxygen electrode and the electrolyte is the origin for the phase change in an oxygen electrode. Guided by the theory, the addition of the electronic conduction in the interface layer leads to the significant suppression of phase change while improving cell performance and performance stability.

Atomic-Scale In Situ Observations of Reversible Phase Transformation Assisted Twinning in a CrCoNi Medium-Entropy Alloy.

Twinning is an important deformation mode of face-centered-cubic (FCC) medium- and high-entropy alloys, especially under extreme loading conditions. However, the twinning mechanism in these alloys that have a low or even negative stacking fault energy remains debated. Here, we report atomic-scale in situ observations of the deformation process of a prototypical CrCoNi medium-entropy alloy under tension. We found that the parent FCC phase first transforms into a hexagonal close-packed (HCP) phase through Shockley partial dislocations slipping on the alternate {111} planes. Subsequently, the HCP phase rapidly changes to an FCC twin band. Such reversible phase transformation assisted twinning is greatly promoted by external tensile loads, as elucidated by geometric phase analysis. These results indicate the previously underestimated role of the metastable HCP phase in nanotwin nucleation and early plastic deformations of CrCoNi alloys and shed light on microstructure regulation of medium-entropy alloys with enhanced mechanical properties.

New Insight into Bulk Structural Degradation of High-Voltage LiCoO2 at 4.55 V.

The aggravated mechanical and structural degradation of layered oxide cathode materials upon high-voltage charging invariably causes fast capacity fading, but the underlying degradation mechanisms remain elusive. Here we report a new type of mechanical degradation through the formation of a kink band in a Mg and Ti co-doped LiCoO2 cathode charged to 4.55 V (vs Li/Li+). The local stress accommodated by the kink band can impede crack propagation, improving the structural integrity in a highly delithiated state. Additionally, machine-learning-aided atomic-resolution imaging reveals that the formation of kink bands is often accompanied by the transformation from the O3 to O1 phase, which is energetically favorable as demonstrated by first-principles calculations. Our results provide new insights into the mechanical degradation mechanism of high-voltage LiCoO2 and the coupling between electrochemically triggered mechanical failures and structural transition, which may provide valuable guidance for enhancing the electrochemical performance of high-voltage layered oxide cathode materials for lithium-ion batteries.

Nanoplatelet Superlattices by Tin-Induced Transformation of FAPbI3 Nanocrystals.

The transition from 3D to 2D lead halide perovskites is traditionally led by the lattice incorporation of bulky organic cations. However, the transformation into a coveted 2D superlattice-like structure by cationic substitution at the Pb2+ site of 3D perovskite is unfamiliar. It is demonstrated that the gradual increment of [Sn2+ ] alters the FASnx Pb1- x I3 nanocrystals into the Ruddlesden-Popper-like nanoplatelets (NPLs), with surface-absorbed oleic acid (OA) and oleylamine (OAm) spacer ligand at 80 °C (FA+ : formamidinium cation). These NPLs are stacked either by a perfect alignment to form the superlattice or by offsetting the NPL edges because of their lateral displacements. The phase transition occurs from the Sn/Pb ratio ≥0.011, with 0.64 wt% of Sn2+ species. At and above Sn/Pb = 0.022, the NPL superlattice stacks start to grow along [00l] with a repeating length of 4.37(3) nm, comprising the organic bilayer and the inorganic block having two octahedral layers (n = 2). Besides, a photoluminescence quantum yield of 98.4% is obtained with Sn/Pb = 0.011 (n ≥ 4), after surface passivation by trioctylphosphine (TOP).

Size Dependent Phase Transformation of Liquid Gallium.

As the most popular liquid metal (LM), gallium (Ga) and its alloys are emerging as functional materials due to their unique combination of fluidic and metallic properties near room temperature. As an important branch of utilizing LMs, micro- and submicron-particles of Ga-based LM are widely employed in wearable electronics, catalysis, energy, and biomedicine. Meanwhile, the phase transition is crucial not only for the applications based on this reversible transformation process, but also for the solidification temperature at which fluid properties are lost. While Ga has several solid phases and exhibits unusual size-dependent phase behavior. This complex process makes the phase transition and undercooling of Ga uncontrollable, which considerably affects the application performance. In this work, extensive (nano-)calorimetry experiments are performed to investigate the polymorph selection mechanism during liquid Ga crystallization. It is surprisingly found that the crystallization temperature and crystallization pathway to either α -Ga or ß -Ga can be effectively engineered by thermal treatment and droplet size. The polymorph selection process is suggested to be highly relevant to the capability of forming covalent bonds in the equilibrium supercooled liquid. The observation of two different crystallization pathways depending on the annealing temperature may indicate that there exist two different liquid phases in Ga.

Microstructural Insights into Performance Loss of High-Voltage Spinel Cathodes for Lithium-ion Batteries.

Spinel-structured LiNix Mn2-x O4 (LNMO), with low-cost earth-abundant constituents, is a promising high-voltage cathode material for lithium-ion batteries. Even though extensive electrochemical investigations have been conducted on these materials, few studies have explored correlations between their loss in performance and associated changes in microstructure. Here, down to the atomic scale, the structural evolution of these materials is investigated upon the progressive cycling of lithium-ion cells. Transgranular cracking is revealed to be a key feature during cycling; this cracking is initiated at the particle surface and leads to the penetration of electrolytes along the crack path, thereby increasing particle exposure to the electrolyte. The lattice structure on the crack surface shows spatial variances, featuring a top layer of rock-salt, a sublayer of a Mn3 O4 -like arrangement, and then a mixed-cation region adjacent to the bulk lattice. The transgranular cracking, along with the emergence of local lattice distortion, becomes more evident with extended cycling. Further, phase transformation at primary particle surfaces and void formation through vacancy condensation is found in the cycled samples. All these features collectively contribute to the performance degradation of the battery cells during electrochemical cycling.

Atomic Dynamics of Multi-Interfacial Migration and Transformations.

Redox-induced interconversions of metal oxidation states typically result in multiple phase boundaries that separate chemically and structurally distinct oxides and suboxides. Directly probing such multi-interfacial reactions is challenging because of the difficulty in simultaneously resolving the multiple reaction fronts at the atomic scale. Using the example of CuO reduction in H2 gas, a reaction pathway of CuO → monoclinic m-Cu4 O3 → Cu2 O is demonstrated and identifies interfacial reaction fronts at the atomic scale, where the Cu2 O/m-Cu4 O3 interface shows a diffuse-type interfacial transformation; while the lateral flow of interfacial ledges appears to control the m-Cu4 O3 /CuO transformation. Together with atomistic modeling, it is shown that such a multi-interface transformation results from the surface-reaction-induced formation of oxygen vacancies that diffuse into deeper atomic layers, thereby resulting in the formation of the lower oxides of Cu2 O and m-Cu4 O3 , and activate the interfacial transformations. These results demonstrate the lively dynamics at the reaction fronts of the multiple interfaces and have substantial implications for controlling the microstructure and interphase boundaries by coupling the interplay between the surface reaction dynamics and the resulting mass transport and phase evolution in the subsurface and bulk.

Defect-Rich Metastable MoS2 Promotes Macrophage Reprogramming in Breast Cancer: A Clinical Perspective.

Tumor-associated macrophages (TAMs) play a crucial function in solid tumor antigen clearance and immune suppression. Notably, 2D transitional metal dichalcogenides (i.e., molybdenum disulfide (MoS2) nanozymes) with enzyme-like activity are demonstrated in animal models for cancer immunotherapy. However, in situ engineering of TAMs polarization through sufficient accumulation of free radical reactive oxygen species for immunotherapy in clinical samples remains a significant challenge. In this study, defect-rich metastable MoS2 nanozymes, i.e., 1T2H-MoS2, are designed via reduction and phase transformation in molten sodium as a guided treatment for human breast cancer. The as-prepared 1T2H-MoS2 exhibited enhanced peroxidase-like activity (≈12-fold enhancement) than that of commercial MoS2, which is attributed to the charge redistribution and electronic state induced by the abundance of S vacancies. The 1T2H-MoS2 nanozyme can function as an extracellular hydroxyl radical generator, efficiently repolarizing TAMs into the M1-like phenotype and directly killing cancer cells. Moreover, the clinical feasibility of 1T2H-MoS2 is demonstrated via ex vivo therapeutic responses in human breast cancer samples. The apoptosis rate of cancer cells is 3.4 times greater than that of cells treated with chemotherapeutic drugs (i.e., doxorubicin).

Enhancing P2/O3 Biphasic Cathode Performance for Sodium-Ion Batteries: A Metaheuristic Approach to Multi-Element Doping Design.

Sodium-ion batteries (SIBs) have emerged as a compelling alternative to lithium-ion batteries (LIBs), exhibiting comparable electrochemical performance while capitalizing on the abundant availability of sodium resources. In SIBs, P2/O3 biphasic cathodes, despite their high energy, require furthur improvements in stability to meet current energy demands. This study introduces a systematic methodology that leverages the meta-heuristically assisted NSGA-II algorithm to optimize multi-element doping in electrode materials, aiming to transcend conventional trial-and-error methods and enhance cathode capacity by the synergistic integration of P2 and O3 phases. A comprehensive phase analysis of the meta-heuristically designed cathode material Na0.76Ni0.20Mn0.42Fe0.30Mg0.04Ti0.015Zr0.025O2 (D-NFMO) is presented, showcasing its remarkable initial reversible capacity of 175.5 mAh g-1 and exceptional long-term cyclic stability in sodium cells. The investigation of structural composition and the stabilizing mechanisms is performed through the integration of multiple characterization techniques. Remarkably, the irreversible phase transition of P2→OP4 in D-NFMO is observed to be dramatically suppressed, leading to a substantial enhancement in cycling stability. The comparison with the pristine cathode (P-NFMO) offers profound insights into the long-term electrochemical stability of D-NFMO, highlighting its potential as a high-voltage cathode material utilizing abundant earth elements in SIBs. This study opens up new possibilities for future advancements in sodium-ion battery technology.

Elucidating Phase Transformation and Surface Amorphization of Li7 La3 Zr2 O12 by In Situ Heating TEM.

Garnet-type Li7 La3 Zr2 O12 (LLZO) solid-state electrolytes hold great promise for the next-generation all-solid-state batteries. An in-depth understanding of the phase transformation during synthetic processes is required for better control of the crystallinity and improvement of the ionic conductivity of LLZO. Herein, the phase transformation pathways and the associated surface amorphization are comparatively investigated during the sol-gel and solid-state syntheses of LLZO using in situ heating transmission electron microscopy (TEM). The combined ex situ X-ray diffraction and in situ TEM techniques are used to reveal two distinct phase transformation pathways (precursors â†’ La2 Zr2 O7  â†’ LLZO and precursors â†’ LLZO) and the subsequent layer-by-layer crystal growth of LLZO on the atomic scale. It is also demonstrated that the surface amorphization surrounding the LLZO crystals is sensitive to the postsynthesis cooling rate and significantly affects the ionic conductivity of pelletized LLZO. This work brings up a critical but often overlooked issue that may greatly exacerbate the Li-ion conductivity by undesired synthetic conditions, which can be leveraged to ameliorate the overall crystallinity to improve the electrochemical performance of LLZO. These findings also shed light on the significance of optimizing surface structure to ensure superior performance of Li-ion conductors.

Mechanochemically Induced Solid-State Transformations of Levofloxacin.

Levofloxacin hemihydrate (LVXh) is a complex fluoroquinolone drug that exists in both hydrated and anhydrous/dehydrated forms. Due to the complexity of such a compound, the primary aim of this study was to investigate the amorphization capabilities and solid-state transformations of LVXh when exposed to mechanical treatment using ball milling. Spray drying was utilized as a comparative method for investigating the capabilities of complete LVX amorphous (LVXam) formation. The solid states of the samples produced were comprehensively characterized by powder X-ray diffraction, thermal analysis, infrared spectroscopy, Rietveld method, and dynamic vapor sorption. The kinetics of the process and the quantification of phases at different time points were conducted by Rietveld refinement. The impact of the different mills, milling conditions, and parameters on the composition of the resulting powders was examined. A kinetic investigation of samples produced using both mills disclosed that it was in fact possible to partially amorphize LVXh upon mechanical treatment. It was discovered that LVXh first transformed to the anhydrous/dehydrated form γ (LVXγ), as an intermediate phase, before converting to LVXam. The mechanism of LVXam formation by ball milling was successfully revealed, and a new method of forming LVXγ and LVXam by mechanical forces was developed. Spray drying from water depicted that complete amorphization of LVXh was possible. The amorphous form of LVX had a glass transition temperature of 80 °C. The comparison of methods highlighted that the formation of LVXam is thus both mechanism- and process-dependent. Dynamic vapor sorption studies of both LVXam samples showed comparable stability properties and crystallized to the most stable hemihydrate form upon analysis. In summary, this work contributed to the detailed understanding of solid-state transformations of essential fluoroquinolones while employing greener and more sustainable manufacturing methods.

Directed energy deposition of 18NiM300 steel: effect of process and post processing conditions on microstructure and properties.

This current study investigates the effect of Direct Energy Deposition (DED) process conditions on the properties and microstructure of M300 maraging steel samples. The investigation centers on two key factors: laser power and deposition environment. The microstructure of this tool steel is analyzed by computing the Primary Cellular Arm Spacing. The findings revealed a significant influence of both inert atmosphere and laser power on cooling conditions. These different cooling rates influence the phase content as demonstrated by X-Ray Diffraction and Electron Backscatter Diffraction measurements. It was demonstrated the presence of different content of residual austenite at cell boundaries. These distinct microstructural features caused variations in the hardness values of the printed samples. Furthermore, a direct aging heat treatment was implemented, that was chosen from Differential Scanning Calorimetry measurements results. This heat treatment proves effective in achieving consistent hardness increases and eliminated the differences among samples built in different process conditions. This outcome suggests the possibility of selecting the most economically viable DED parameters for optimal results.

This study innovatively explores how DED process conditions impact M300 maraging steel microstructure, revealing crucial insights for optimizing properties and achieving consistent results, ensuring economically viable applications.

Temperature-Controlled Reversible Formation and Phase Transformation of 3D Nanocrystal Superlattices Through In Situ Small-Angle X-ray Scattering.

For decades, the spontaneous organization of nanocrystals into superlattices has captivated the scientific community. However, achieving direct control over the formation of the superlattice and its phase transformations has proven to be a grand challenge, often resulting in the generation of multiple symmetries under the same experimental conditions. Here, we achieve direct control over the formation of the superlattice and its phase transformations by modulating the thermal energy of a nanocrystal dispersion without relying on solvent evaporation. We follow the temperature-dependent dynamics of the self-assembly process using synchrotron-based small-angle X-ray scattering. When cooled below -24.5 °C, lead sulfide nanocrystals form micrometer-sized three-dimensional phase-pure body-centered cubic superlattices. When cooled below -35.1 °C, these superlattices undergo a collective diffusionless phase transformation that yields denser body-centered tetragonal phases. These structural changes can be reversed by increasing the temperature of the dispersion and may lead to the direct modulation of the optical properties of these artificial solids.

Deep-Learning Aided Atomic-Scale Phase Segmentation toward Diagnosing Complex Oxide Cathodes for Lithium-Ion Batteries.

Phase transformation─a universal phenomenon in materials─plays a key role in determining their properties. Resolving complex phase domains in materials is critical to fostering a new fundamental understanding that facilitates new material development. So far, although conventional classification strategies such as order-parameter methods have been developed to distinguish remarkably disparate phases, highly accurate and efficient phase segmentation for material systems composed of multiphases remains unavailable. Here, by coupling hard-attention-enhanced U-Net network and geometry simulation with atomic-resolution transmission electron microscopy, we successfully developed a deep-learning tool enabling automated atom-by-atom phase segmentation of intertwined phase domains in technologically important cathode materials for lithium-ion batteries. The new strategy outperforms traditional methods and quantitatively elucidates the correlation between the multiple phases formed during battery operation. Our work demonstrates how deep learning can be employed to foster an in-depth understanding of phase transformation-related key issues in complex materials.

Phase Stability of Hexagonal/Cubic Boron Nitride Nanocomposites.

Boron nitride (BN) is an exceptional material, and among its polymorphs, two-dimensional (2D) hexagonal and three-dimensional (3D) cubic BN (h-BN and c-BN) phases are most common. The phase stability regimes of these BN phases are still under debate, and phase transformations of h-BN/c-BN remain a topic of interest. Here, we investigate the phase stability of 2D/3D h-BN/c-BN nanocomposites and show that the coexistence of two phases can lead to strong nonlinear optical properties and low thermal conductivity at room temperature. Furthermore, spark-plasma sintering of the nanocomposite shows complete phase transformation to 2D h-BN with improved crystalline quality, where 3D c-BN possibly governs the nucleation and growth kinetics. Our demonstration might be insightful in phase engineering of BN polymorph-based nanocomposites with desirable properties for optoelectronics and thermal energy management applications.

Atomic Insight into the Successive Antiferroelectric-Ferroelectric Phase Transition in Antiferroelectric Oxides.

Antiferroelectrics characterized by voltage-driven reversible transitions between antiparallel and parallel polarity are promising for cutting-edge electronic and electrical power applications. Wide-ranging explorations revealing the macroscopic performances and microstructural characteristics of typical antiferroelectric systems have been conducted. However, the underlying mechanism has not yet been fully unraveled, which depends largely on the atomistic processes. Herein, based on atomic-resolution transmission electron microscopy, the deterministic phase transition pathway along with the underlying lattice-by-lattice details in lead zirconate thin films was elucidated. Specifically, we identified a new type of ferrielectric-like dipole configuration with both angular and amplitude modulations, which plays the role of a precursor for a subsequent antiferroelectric to ferroelectric transformation. With the participation of the ferrielectric-like phase, the phase transition pathways driven by the phase boundary have been revealed. We provide new insights into the consecutive phase transformation in low-dimensional lead zirconate, which thus would promote potential antiferroelectric-based multifunctional devices.

Structural Anisotropy-Driven Atomic Mechanisms of Phase Transformations in the Pt-Sn System.

Using in situ atomic-resolution scanning transmission electron microscopy, atomic movements and rearrangements associated with diffusive solid to solid phase transformations in the Pt-Sn system are captured to reveal details of the underlying atomistic mechanisms that drive these transformations. In the PtSn4 to PtSn2 phase transformation, a periodic superlattice substructure and a unique intermediate structure precede the nucleation and growth of the PtSn2 phase. At the atomic level, all stages of the transformation are templated by the anisotropic crystal structure of the parent PtSn4 phase. In the case of the PtSn2 to Pt2Sn3 transformation, the anisotropy in the structure of product Pt2Sn3 dictates the path of transformation. Analysis of atomic configurations at the transformation front elucidates the diffusion pathways and lattice distortions required for these phase transformations. Comparison of multiple Pt-Sn phase transformations reveals the structural parameters governing solid to solid phase transformations in this technologically interesting intermetallic system.

Transformation behavior of heavy metal during Co-thermal treatment of hazardous waste incineration fly ash and slag/electroplating sludge.

In this study, the behavior of heavy metal transformation during the co-thermal treatment of hazardous waste incineration fly ash (HWIFA) and Fe-containing hazardous waste (including hazardous waste incineration bottom slag (HWIBS) and electroplating sludge (ES)) was investigated. The findings demonstrated that such a treatment effectively reduced the static leaching toxicity of Cr and Pb. Moreover, when the treatment temperature exceeded 1000 °C, the co-thermal treated sample exhibited low concentrations of dynamically leached Cr, Pb, and Zn, indicating that these heavy metals were successful detoxified. Thermodynamic analyses and phase transformation results suggested that the formation of spinel and the gradual disappearance of chromium dioxide in the presence of Fe-containing hazardous wastes contributed to the solidification of chromium. Additionally, the efficient detoxification of Pb and Zn was attributed to their volatilization and entry into the liquid phase during the co-thermal treatment process. Therefore, this study sets an excellent example of the co-thermal treatment of hazardous wastes and the control of heavy metal pollution during the treatment process.