Tailoring chemical bonds to design unconventional glasses.

Glasses are commonly described as disordered counterparts of the corresponding crystals; both usually share the same short-range order, but glasses lack long-range order. Here, a quantification of chemical bonding in a series of glasses and their corresponding crystals is performed, employing two quantum-chemical bonding descriptors, the number of electrons transferred and shared between adjacent atoms. For popular glasses like SiO2, GeSe2, and GeSe, the quantum-chemical bonding descriptors of the glass and the corresponding crystal hardly differ. This explains why these glasses possess a similar short-range order as their crystals. Unconventional glasses, which differ significantly in their short-range order and optical properties from the corresponding crystals are only found in a distinct region of the map spanned by the two bonding descriptors. This region contains crystals of GeTe, Sb2Te3, and GeSb2Te4, which employ metavalent bonding. Hence, unconventional glasses are only obtained for solids, whose crystals employ theses peculiar bonds.

Physics of microscale freeform 3D printing of ice.

Ice is emerging as a promising sacrificial material in the rapidly expanding area of advanced manufacturing for creating precise 3D internal geometries. Freeform 3D printing of ice (3D-ICE) can produce microscale ice structures with smooth walls, hierarchical transitions, and curved and overhang features. However, controlling 3D-ICE is challenging due to an incomplete understanding of its complex physics involving heat transfer, fluid dynamics, and phase changes. This work aims to advance our understanding of 3D-ICE physics by combining numerical modeling and experimentation. We developed a 2D thermo-fluidic model to analyze the transition from layered to continuous printing and a 3D thermo-fluidic model for the oblique deposition, which enables curved and overhang geometries. Experiments are conducted and compared with model simulations. We found that high droplet deposition rates enable the continuous deposition mode with a sustained liquid cap on top of the ice, facilitating smooth geometries. The diameter of ice structures is controlled by the droplet deposition frequency. Oblique deposition causes unidirectional spillover of the liquid cap and asymmetric heat transfer at the freeze front, rotating the freeze front. These results provide valuable insights for reproducible 3D-ICE printing that could be applied across various fields, including tissue engineering, microfluidics, and soft robotics.

Tunable pheromone interactions among microswimmers.

Indirect interactions via shared memory deposited on the field ("field memory") play an essential role in collective motions. Some motile species, such as ants and bacteria, use attractive pheromones to complete many tasks. Mimicking these kinds of collective behavior at the laboratory scale, we present a pheromone-based autonomous agent system with tunable interactions. In this system, colloidal particles leave phase-change trails reminiscent of the process of pheromone deposition by individual ants, and the trails attract other particles and themselves. To implement this, we combine two physical phenomena: the phase change of a Ge2Sb2Te5 (GST) substrate by self-propelled Janus particles (pheromone deposition) and the AC (alternating current) electroosmotic (ACEO) flow generated by this phase change (pheromone attraction). Laser irradiation causes the GST layer to crystalize locally beneath the Janus particles, owing to the lens heating effect. Under AC field application, the high conductivity of the crystalline trail causes a field concentration and generates ACEO flow, and we introduce this flow as an attractive interaction between the Janus particles and the crystalline trail. By changing the AC frequency and voltage, we can tune the attractive flow, i.e., the sensitivity of the Janus particles to the trail, and the isolated particles undergo diverse states of motion, from self-caging to directional motion. A swarm of Janus particles also shows different states of collective motion, including colony formation and line formation. This tunability enables a reconfigurable system driven by a pheromone-like memory field.

4-Vinylanisole promotes conspecific interaction and acquisition of gregarious behavior in the migratory locust.

Chemical signals from conspecifics are essential in insect group formation and maintenance. Migratory locusts use the aggregation pheromone 4-vinylanisole (4VA), specifically released by gregarious locusts, to attract and recruit conspecific individuals, leading to the formation of large-scale swarms. However, how 4VA contributes to the transition from solitary phase to gregarious phase remains unclear. We investigated the occurrence of locust behavioral phase changes in the presence and absence of 4VA perception. The findings indicated that solitary locusts require crowding for 48 and 72 h to adopt partial and analogous gregarious behavior. However, exposure to increased concentrations of 4VA enabled solitary locusts to display behavioral changes within 24 h of crowding. Crowded solitary locusts with RNAi knockdown of Or35, the specific olfactory receptor for 4VA, failed to exhibit gregarious behaviors. Conversely, the knockdown of Or35 in gregarious locusts resulted in the appearance of solitary behavior. Additionally, a multi-individual behavioral assay system was developed to evaluate the interactions among locust individuals, and four behavioral parameters representing the inclination and conduct of social interactions were positively correlated with the process of crowding. Our data indicated that exposure to 4VA accelerated the behavioral transition from solitary phase to gregarious phase by enhancing the propensity toward proximity and body contact among conspecific individuals. These results highlight the crucial roles of 4VA in the behavioral phase transition of locusts. Furthermore, this study offers valuable insights into the mechanisms of behavioral plasticity that promote the formation of locust swarms and suggests the potential for 4VA application in locust control.

The miR156 juvenility factor and PLETHORA 2 form a regulatory network and influence timing of meristem growth and lateral root emergence.

Plants develop throughout their lives: seeds become seedlings that mature and form fruits and seeds. Although the underlying mechanisms that drive these developmental phase transitions have been well elucidated for shoots, the extent to which they affect the root is less clear. However, root anatomy does change as some plants mature; meristems enlarge and radial thickening occurs. Here, in Arabidopsis thaliana, we show that overexpressing miR156A, a gene that promotes the juvenile phase, increased the density of the root system, even in grafted plants in which only the rootstock had the overexpression genotype. In the root, overexpression of miR156A resulted in lower levels of PLETHORA 2, a protein that affects formation of the meristem and elongation zone. Crossing in an extra copy of PLETHORA 2 partially rescued the effects of miR156A overexpression on traits affecting root architecture, including meristem length and the rate of lateral root emergence. Consistent with this, PLETHORA 2 also inhibited the root-tip expression of another miR156 gene, miR156C. We conclude that the system driving phase change in the shoot affects developmental progression in the root, and that PLETHORA 2 participates in this network.

The genetic basis of natural variation in the timing of vegetative phase change in Arabidopsis thaliana.

The juvenile-to-adult transition in plants is known as vegetative phase change and is marked by changes in the expression of leaf traits in response to a decrease in the level of miR156 and miR157. To determine whether this is the only mechanism of vegetative phase change, we measured the appearance of phase-specific leaf traits in 70 natural accessions of Arabidopsis thaliana. We found that leaf shape was poorly correlated with abaxial trichome production (two adult traits), that variation in these traits was not necessarily correlated with the level of miR156, and that there was little to no correlation between the appearance of adult-specific vegetative traits and flowering time. We identified eight quantitative trait loci controlling phase-specific vegetative traits from a cross between the Columbia (Col-0) and Shakdara (Sha) accessions. Only one of these quantitative trait loci includes genes known to regulate vegetative phase change (MIR156A and TOE1), which were expressed at levels consistent with the precocious phenotype of Sha. Our results suggest that vegetative phase change is regulated both by the miR156/SPL module and by genes specific to different vegetative traits, and that natural variation in vegetative phase change can arise from either source.

Warming-induced monsoon precipitation phase change intensifies glacier mass loss in the southeastern Tibetan Plateau.

Glaciers are key components of the mountain water towers of Asia and are vital for downstream domestic, agricultural, and industrial uses. The glacier mass loss rate over the southeastern Tibetan Plateau is among the highest in Asia and has accelerated in recent decades. This acceleration has been attributed to increased warming, but the mechanisms behind these glaciers' high sensitivity to warming remain unclear, while the influence of changes in precipitation over the past decades is poorly quantified. Here, we reconstruct glacier mass changes and catchment runoff since 1975 at a benchmark glacier, Parlung No. 4, to shed light on the drivers of recent mass losses for the monsoonal, spring-accumulation glaciers of the Tibetan Plateau. Our modeling demonstrates how a temperature increase (mean of 0.39 ∘C ⋅dec-1 since 1990) has accelerated mass loss rates by altering both the ablation and accumulation regimes in a complex manner. The majority of the post-2000 mass loss occurred during the monsoon months, caused by simultaneous decreases in the solid precipitation ratio (from 0.70 to 0.56) and precipitation amount (-10%), leading to reduced monsoon accumulation (-26%). Higher solid precipitation in spring (+18%) during the last two decades was increasingly important in mitigating glacier mass loss by providing mass to the glacier and protecting it from melting in the early monsoon. With bare ice exposed to warmer temperatures for longer periods, icemelt and catchment discharge have unsustainably intensified since the start of the 21st century, raising concerns for long-term water supply and hazard occurrence in the region.

Fluidic phase-change materials with continuous latent heat from theoretically tunable ternary metals for efficient thermal management.

Phase-change materials (PCMs), as important energy storage materials (ESMs), have been widely used in heat dissipation for electronics. However, PCMs are encountering huge challenges since the extremely limited space in microelectronics largely suppresses the applied volume of PCMs, which demands excellent PCMs that can fully utilize the valuable latent heat. This work successfully found a universal strategy toward powerful ESMs from fluidic ternary metals (TMs, GaInSn as a representative TM in this work). TMs exhibit high thermal conductivity (20.3 W m-1 K-1) and significantly effective latent heat (115 J/cm3) and, more important, show continuous phase transition and full utilization of the valuable latent heat. Interestingly, theoretical prediction through ternary phase diagram is carried out to easily tune the melting range, latent heat, and fluidity (viscosity) of TMs to adapt with different service conditions. As a result, thermally conductive silicone grease can be conveniently fabricated via simple shear mixing of TM and polymers. Such thermally conductive TM grease inherits the merits of TM, exhibiting continuous thermal control over daily electronics according to thermal shock performance.

Arbitrary Programming of Racetrack Resonators Using Low-Loss Phase-Change Material Sb2Se3.

The programmable photonic integrated circuit (PIC) is an enabling technology behind optical interconnects and quantum information processing. Conventionally, the programmability of PICs is driven by the thermo-optic effect, free carrier dispersion, or mechanical tuning. These effects afford either high speed or a large extinction ratio, but all require constant power or bias to maintain the states, which is undesirable for programmability with infrequent switching. Recent progress in programmable PICs based on nonvolatile phase-change materials (PCMs) offers an attractive solution to a truly "set-and-forget" switch that requires zero static energy. Here, we report an essential building block of large-scale programmable PICs─a racetrack resonator with independent control of coupling and phase. We changed the resonance extinction ratio (ER) without perturbing the resonance wavelength, leveraging a programmable unit based on a directional coupler and a low-loss PCM Sb2Se3. The unit is only 33-µm-long and has an operating bandwidth over 50 nm, a low insertion loss (∼0.36 dB), high ER (∼15 dB), and excellent fabrication yield of over 1000 cycles endurance across nine switches. The work is a crucial step toward future large-scale energy-efficient programmable PICs.

Rewritable Photonic Integrated Circuit Canvas Based on Low-Loss Phase Change Material and Nanosecond Pulsed Lasers.

Programmable photonic integrated circuits (PICs) are an increasingly important platform in optical science and engineering. However, current programmable PICs are mostly formed through subtractive fabrication techniques, which limits the reconfigurability of the device and makes prototyping costly and time-consuming. A rewritable PIC architecture can circumvent these drawbacks, where PICs are repeatedly written and erased on a single PIC canvas. We demonstrate such a rewritable PIC platform by selective laser writing a layer of wide-band-gap phase change material (PCM) Sb2S3 with a low-cost benchtop setup. We show arbitrary patterning with resolution up to 300 nm and write dielectric assisted waveguides with a low optical loss of 0.0172 dB/µm. We envision that using this inexpensive benchtop platform thousands of PIC designs can be written, tested, and erased on the same chip without the need for lithography/etching tools or a nanofabrication facility, thus reducing manufacturing cost and increasing accessibility.

Measuring Electrical Resistivity at the Nanoscale in Phase-Change Materials.

Electrical resistivity is the key parameter in the active regions of many current nanoscale devices, from memristors to resistive random-access memory and phase-change memories. The local resistivity of the materials is engineered on the nanoscale to fit the performance requirements. Phase-change memories, for example, rely on materials whose electrical resistance increases dramatically with a change from a crystalline to an amorphous phase. Electrical characterization methods have been developed to measure the response of individual devices, but they cannot map the local resistance across the active area. Here, we propose a method based on operando electron holography to determine the local resistance within working devices. Upon switching the device, we show that electrical resistance is inhomogeneous on the scale of only a few nanometers.

Controlled Self-Assembly of Nanoscale Superstructures in Phase-Change Ge-Sb-Te Nanowires.

Controlled growth of semiconductor nanowires with atomic precision offers the potential to tune the material properties for integration into scalable functional devices. Despite significant progress in understanding the nanowire growth mechanism, definitive control over atomic positions of its constituents, structure, and morphology via self-assembly remains challenging. Here, we demonstrate an exquisite control over synthesis of cation-ordered nanoscale superstructures in Ge-Sb-Te nanowires with the ability to deterministically vary the nanowire growth direction, crystal facets, and periodicity of cation ordering by tuning the relative precursor flux during synthesis. Furthermore, the role of anisotropy on material properties in cation-ordered nanowire superstructures is illustrated by fabricating phase-change memory (PCM) devices, which show significantly different growth direction dependent amorphization current density. This level of control in synthesizing chemically ordered nanoscale superstructures holds potential to precisely modulate fundamental material properties such as the electronic and thermal transport, which may have implications for PCM, thermoelectrics, and other nanoelectronic devices.

Interlayer Coupling Controlled Ordering and Phases in Polar Vortex Superlattices.

The recent discovery of polar topological structures has opened the door for exciting physics and emergent properties. There is, however, little methodology to engineer stability and ordering in these systems, properties of interest for engineering emergent functionalities. Notably, when the surface area is extended to arbitrary thicknesses, the topological polar texture becomes unstable. Here we show that this instability of the phase is due to electrical coupling between successive layers. We demonstrate that this electrical coupling is indicative of an effective screening length in the dielectric, similar to the conductor-ferroelectric interface. Controlling the electrostatics of the superlattice interfaces, the system can be tuned between a pure topological vortex state and a mixed classical-topological phase. This coupling also enables engineering coherency among the vortices, not only tuning the bulk phase diagram but also enabling the emergence of a 3D lattice of polar textures.

The Metal-Insulator Transition in Vanadium Oxide Nanofilms Enables Microkelvin-Resolution Thermometry.

High-resolution thermometry is critical for probing nanoscale energy transport. Here, we demonstrate how high-resolution thermometry can be accomplished using vanadium oxide (VOx), which features a sizable temperature-dependence of its resistance at room temperature and an even stronger dependence at its metal-insulator-transition (MIT) temperature. We microfabricate VOx nanofilm-based electrical resistance thermometers that undergo a metal-insulator-transition at ∼337 K and systematically quantify their temperature-dependent resistance, noise characteristics, and temperature resolution. We show that VOx sensors can achieve, in a bandwidth of ∼16 mHz, a temperature resolution of ∼5 µK at room temperature (∼300 K) and a temperature resolution of ∼1 µK at the MIT (∼337 K) when the amplitude of temperature perturbations is in the microkelvin range, which, in contrast to larger perturbations, is found to avoid hysteric resistance responses. These results demonstrate that VOx-based thermometers offer a ∼10-50-fold improvement in resolution over widely used Pt-based thermometers.

Adaptive Signal Modulation Evolved by the Inherent Nonlinearity of Phase-Change Quantum-Dot String.

To simulate a topological neural network handling weak signals via stochastic resonance (SR), it is necessary to introduce an inherent nonlinearity into nanoscale devices. We use the self-assembly method to successfully fabricate a phase-change quantum-dot string (PCQDS) crossing Pd/Nb:AlNO/AlNO/Nb:AlNO/Pd multilayer. The inherent nonlinearity of phase change couples with electron tunneling so that PCQDS responds to a long signal sequence in a modulated output style, in which the pulse pattern evolves to that enveloped by two sets of periodic wave characterized by neural action potential. We establish an SR mode consisting of several two-state systems in which dissipative tunneling is coupled to environment. Size oscillations owing to NbO QDs adaptively adjust barriers and wells, such that tunneling can be periodically modulated by either asymmetric energy or local temperature. When the external periodic signals are applied, the system first follows the forcing frequency. Subsequently, certain PCQDs oscillate independently and consecutively to produce complicated frequency and amplitude modulations.

Hybrid Ghost Phonon Polaritons in Thin-Film Heterostructure.

Ghost phonon polaritons (g-PhPs), a unique class of phonon polaritons in the infrared, feature ultralong diffractionless propagation (>20 µm) across the surface and tilted wavefronts in the bulk. Here, we study hybrid g-PhPs in a heterostructure of calcite and an ultrathin film of the phase change material (PCM) In3SbTe2, where the optical field is bound in the PCM film with enhanced confinement compared with conventional g-PhPs. Near-field optical images for hybrid g-PhPs reveal a lemniscate pattern in the momentum distribution. We fabricated In3SbTe2 gratings and investigated how different orientations and periodicities of gratings impact the propagation of hybrid g-PhPs. As the grating period decreases to zero, the wavefront of hybrid g-PhPs can be dynamically steered by varying the grating orientation. Our results highlight the promise of hybrid g-PhPs with tunable functionalities for nanophotonic studies.

Aperiodic Bragg Reflectors for Tunable High-Purity Structural Color Based on Phase Change Material.

Tunable thin-film coating-based reflective color displays have versatile applications including image sensors, camouflage devices, spatial light modulators, and intelligent windows. However, generating high-purity colors using such coatings have posed a challenge. Here, we reveal high-purity color generation using an ultralow-loss phase change material (Sb2S3)-based tunable aperiodic distributed Bragg reflector (A-DBR). By strategically adjusting the periodicity of the adjacent layers of A-DBRs, we realize a narrow photonic bandgap with high reflectivity to generate high-purity orange and yellow colors. In particular, we demonstrate an A-DBR with a large photonic bandgap tunability by changing the structural phase of Sb2S3 layers from amorphous to crystalline. Moreover, we experimentally tailor multistate tunable colors through external optical stimuli. Unlike conventional nano thin-film coatings, our proposed approach offers an irradiance-free, narrowband, and highly reflective color band, achieving exceptional color purity by effectively suppressing reflections in off-color bands.

Dynamic and Polarization-Independent Wavefront Control Based on Hybrid Topological Metasurfaces.

Exceptional points (EPs), known as non-Hermitian singularities, have been observed and investigated in parity-time symmetric metasurfaces. However, the chirality and tunability in non-Hermitian metasurfaces still need to be explored. Here, we propose a dynamic topological metasurface with the meta-atom consisting of two orthogonally oriented nanorods, which are placed on the phase change material Ge2Sb2Te5 (GST) and SiO2 dielectric layer, respectively. When GST is converted from the amorphous state (a-GST) to the crystalline state (c-GST), an EP can be dynamically switched from the "ON" state to the "OFF" state in a parameter space. Moreover, based on the topologically protected phase and amplitude modulations of the cross-polarization component, the phase-only hologram and amplitude-only hologram are engineered in the a-GST case and concealed in the c-GST case. Finally, we explore the 2D-chiral symmetry of meta-atoms and further propose two spin-selective meta-deflectors and a hybrid meta-deflector operating with arbitrary polarizations. The GST-based hybrid metasurface offers richer possibilities to realize various wavefront controls.

Uncovering Temperature-Insensitive Feature of Phase Change Thermal Storage Electrolyte for Safe Lithium Battery.

Lithium-ion batteries (LIBs) have emerged as highly promising energy storage devices due to their high energy density and long cycle life. However, their safety concern, particularly under thermal shock, hinders their widespread applications. Herein, a temperature-insensitive electrolyte (TI-electrolyte) with exceptional resistance to thermal stimuli is presented to address the safety issues arising from the lack of thermal abuse tolerance in LIBs. The TI-electrolyte is composed of two phase-change polymers with differentiation melting points (60 and 35°C for polycaprolactone and polyethylene glycol respectively), delivering a wide temperature-resistant range. It is demonstrated that the TI-electrolyte possesses a heat capacity of 27.3 J g-1. The crystalline region in the TI-electrolyte shrinks when confronted with above-ambient temperature, absorbing heat to unlock molecular chains fixed in the crystal lattice, becoming amorphous. Notably, the Li||LFP pouch cell delays 3 valuable minutes to achieve the same temperature as conventional liquid electrolytes (LE) when subjected to thermal shocks, paralleling with the simulation results. Moreover, symmetrical Li||Li cell cycles stably for over 600 h at 0.1 mA cm-2, and Li||LFP full cell demonstrates excellent electrochemical performance, with a capacity of 142.7 mAh g-1 at 0.5 C, thus representing a critical approach to enhancing the safety of LIBs.

Phase Change Heterostructure Memory with Oxygen-Doped Sb2Te3 Layers for Improved Durability and Reliability through Nano crystalline Island Formation.

Phase-change random access memory represents a notable advancement in nonvolatile memory technology; however, it faces challenges in terms of thermal stability and reliability, hindering its broader application. To mitigate these issues, doping and structural modification techniques such as phase-change heterostructures (PCH) are widely studied. Although doping typically enhances thermal stability, it can adversely affect the switching speed. Structural modifications such as PCH have struggled to sustain stable performance under high atmospheric conditions. In this study, these challenges are addressed by synergizing oxygen-doped Sb2Te3 (OST) with PCH technology. This study presents a novel approach in which OST significantly improves the crystallization temperature, power efficiency, and cyclability. Subsequently, the integration of the PCH technology bolsters the switching speed and further amplifies the device's reliability and endurance by refining the grain size (≈7 nm). The resultant OST-PCH devices exhibit exceptional performance metrics, including a drift coefficient of 0.003 in the RESET state, endurance of ≈4 × 108 cycles, an switching speed of 300 ns, and 67.6 pJ of RESET energy. These findings suggest that the OST-PCH devices show promise for integration into embedded systems, such as those found in automotive applications and Internet of Things devices.