Catalytic wet peroxide oxidation of phenol through mesoporous silica-pillared clays supported iron and/or titanium incorporated catalysts.

Catalytic performances of Silica Pillared Clay (SPC) supports synthesized in different silica amounts both from standard SWy-2 clay mineral and Hançili region bentonite rock (HWB), and iron (Fe) and/or titanium (Ti) incorporated SPCs in different combinations were evaluated in various advanced Catalytic Wet Peroxide Oxidation (CWPO) of phenol. Host clay mineral type led to different oxidation performances and metal loading created significant increases in the catalytic performance. CWPO performance of Fe-loaded SPCs was better than Ti-loaded ones, so oxidation parameters for Fe-SPCs were studied in detail. Catalyst amount and rise in temperature increased phenol conversion values significantly, and catalysts were more effective in lower pH reaction medium. Aromatic intermediates such as catechol, hydroquinone and benzoquinone formed at the beginning of oxidation were oxidized to carboxylic acids with an advancing oxidation time. The presence of carboxylic acids such as oxalic and formic acid resulted in relatively low total organic carbon (TOC) conversion values. The highest catalytic activity was obtained with high silica content Fe-SPCs synthesized with both host clays. Complete conversion was nearly achieved within 60 min with an experimental condition of T = 30 °C, pH = 3.7 and catalyst/solution ratio = 2 g/L for SWy-2 based catalyst by applying either CWPO or PCWPO (Photo Catalytic Wet Peroxide Oxidation) techniques. SCWPO (Sono Catalytic Wet Peroxide Oxidation) technique also yielded this value at the same oxidation conditions for HWB based catalyst. TOC conversion values at 240 min oxidation time were determined as 33% and 48% for SWy-2 based catalyst with CWPO and PCWPO techniques, respectively, and 37% for HWB based catalyst with SCWPO technique. SWy-2 based catalyst still retained its performance after 3 cycles.

Superior photo-Fenton degradation of acetamiprid by α- Fe2O3-pillared bentonite/L-cysteine complex: Synergy of L-cysteine and visible light.

Acetamiprid is a potential threat to human health, aquatic life, soil microorganisms and beneficial insects as a recalcitrant pollutant in wastewater treatment plant effluents. In this work, the synthesized α-Fe2O3-pillared bentonite (FPB) was used to degrade acetamiprid in the photo-Fenton process with the assistance of L-cysteine (L-cys) existing in natural aquatic environment. The kinetic constant k of acetamiprid degradation by FPB/L-cys in the photo-Fenton process was far more than that in the Fenton process of FPB/L-cys lacking light and the photo-Fenton process of FPB without L-cys. The positive linear correlation between k and ≡Fe(II) content indicated the synergy of L-cys and visible light accelerated the cycle of Fe(III) to Fe(II) in FPB/L-cys during the degradation of acetamiprid by elevating the visible light response of FPB, and promoting the interfacial electron transfer from the active sites of FPB to hydrogen peroxide and photo-generated electron transfer from conduction band of α-Fe2O3 to the active sites of FPB. The boosting •OH and 1O2 were predominantly responsible for acetamiprid degradation. Acetamiprid could be efficiently degraded into less toxic small molecules in the photo-Fenton process via C-N bond breaking, hydroxylation, demethylation, ketonization, dechlorination, and ring cleavage.

Carbon Nitride Pillared Vanadate Via Chemical Pre-Intercalation Towards High-Performance Aqueous Zinc-Ion Batteries.

Vanadium based compounds are promising cathode materials for aqueous zinc (Zn)-ion batteries (AZIBs) due to their high specific capacity. However, the narrow interlayer spacing, low intrinsic conductivity and the vanadium dissolution still restrict their further application. Herein, we present an oxygen-deficient vanadate pillared by carbon nitride (C3 N4 ) as the cathode for AZIBs through a facile self-engaged hydrothermal strategy. Of note, C3 N4 nanosheets can act as both the nitrogen source and pre-intercalation species to transform the orthorhombic V2 O5 into layered NH4 V4 O10 with expanded interlayer spacing. Owing to the pillared structure and abundant oxygen vacancies, both the Zn2+ ion (de)intercalation kinetics and the ionic conductivity in the NH4 V4 O10 cathode are promoted. As a result, the NH4 V4 O10 cathode delivers exceptional Zn-ion storage ability with a high specific capacity of about 370 mAh g-1 at 0.5 A g-1 , a high-rate capability of 194.7 mAh g-1 at 20 A g-1 and a stable cycling performance of 10 000 cycles.

Understanding MOF Flexibility: An Analysis Focused on Pillared Layer MOFs as a Model System.

Flexible porous frameworks are at the forefront of materials research. A unique feature is their ability to open and close their pores in an adaptive manner induced by chemical and physical stimuli. Such enzyme-like selective recognition offers a wide range of functions ranging from gas storage and separation to sensing, actuation, mechanical energy storage and catalysis. However, the factors affecting switchability are poorly understood. In particular, the role of building blocks, as well as secondary factors (crystal size, defects, cooperativity) and the role of host-guest interactions, profit from systematic investigations of an idealized model by advanced analytical techniques and simulations. The review describes an integrated approach targeting the deliberate design of pillared layer metal-organic frameworks as idealized model materials for the analysis of critical factors affecting framework dynamics and summarizes the resulting progress in their understanding and application.

Fabrication of Pillar-Cage Fluorinated Anion Pillared Metal-Organic Frameworks via a Pillar Embedding Strategy and Efficient Separation of SO2 through Multi-Site Trapping.

Flue gas desulfurization is crucial for both human health and ecological environments. However, developing efficient SO2 adsorbents that can break the trade-off between adsorption capacity and selectivity is still challenging. In this work, a new type of fluorinated anion-pillared metal-organic frameworks (APMOFs) with a pillar-cage structure is fabricated through pillar-embedding into a highly porous and robust framework. This type of APMOFs comprises smaller tetrahedral cages and larger icosahedral cages interconnected by embedded [NbOF5 ]2- and [TaOF5 ]2- anions acting as pillars. The APMOFs exhibits high porosity and density of fluorinated anions, ensuring exceptional SO2 adsorption capacity and ultrahigh selectivity for SO2 /CO2 and SO2 /N2 gas mixtures. Furthermore, these two structures demonstrate excellent stability towards water, acid/alkali, and SO2 adsorption. Cycle dynamic breakthrough experiments confirm the excellent separation performance of SO2 /CO2 gas mixtures and their cyclic stability. SO2 -loaded single-crystal X-ray diffraction, Grand canonical Monte Carlo (GCMC) simulations combined with density functional theory (DFT) calculations reveal the preferred adsorption domains for SO2 molecules. The multiple-site host-guest and guest-guest interactions facilitate selective recognition and dense packing of SO2 in this hybrid porous material. This work will be instructive for designing porous materials for flue gas desulfurization and other gas-purification processes.

Towards a Stable Layered Vanadium Oxide Cathode for High-Capacity Calcium Batteries.

Calcium-based batteries have promising advantages over multivalent ion batteries. However, the fabrication of highly efficient calcium batteries is limited by the quality of available cathode materials, which motivates the exploration of electrodes that can enable reversible, stable Ca2+ intercalation. Herein, layered vanadium oxide Mgx V2 O5 ·nH2 O is used as a calcium battery cathode, and it exhibits a high capacity of 195.5 mA h g-1 at 20 mA g-1 and an outstanding cycling life (93.6% capacity retention after 2500 cycles at 1 A g-1 ). Combining theoretical analysis and experimental design, a series of layered oxides (Mx V2 O5 ·nH2 O, M = Mg, Ca, Sr) is selected as a model system to identify the Ca storage mechanism. It is found that the hydrated alkaline earth metal ions in the vanadium-based layered oxide interlayers play a critical role as pillared stabilizers to facilitate Ca2+ insertion/extraction. Compared with Ca2+ and Sr2+ , the presence of Mg2+ provides vanadium oxides with a rigid framework that allows for minimized volume fluctuation (a tiny variation of ≈0.15 Å of the interlayer spacing). Such an understanding of the Ca storage mechanism is a key step in the rational design and selection of materials for calcium batteries to achieve a high capacity and long cycle life.

Fluorescence-Responsive Detection of Ag(I), Al(III), and Cr(III) Ions Using Cd(II) Based Pillared-Layer Frameworks.

Two Cd(II) based coordination polymers, {Cd3(btc)2(BTD-bpy)2]∙1.5MeOH∙4H2O}n (1) and [Cd2(1,4-ndc)2(BTD-bpy)2]n (2), where BTD-bpy = bis(pyridin-4-yl)benzothiadiazole, btc = benzene-1,3,5-tricarboxylate, and 1,4-ndc = naphthalene-1,4-dicarboxylate, were hydro(solvo)thermally synthesized. Compound 1 has a three-dimensional non-interpenetrating pillared-bilayer open framework with sufficient free voids of 25.1%, which is simplified to show a topological (4,6,8)-connected net with the point symbol of (324256)(344454628)(3442619728). Compound 2 has a three-dimensional two-fold interpenetrating bipillared-layer condense framework regarded as a 6-connected primitive cubic (pcu) net topology. Compounds 1 and 2 both exhibited good water stability and high thermal stability approaching 350 °C. Upon excitation, compounds 1 and 2 both emitted blue light fluorescence at 471 and 479 nm, respectively, in solid state and at 457 and 446 nm, respectively, in the suspension phase of H2O. Moreover, compounds 1 and 2 in the suspension phase of H2O both exhibited a fluorescence quenching effect in sensing Ag+, attributed to framework collapse, and a fluorescence enhancement response in sensing Al3+ and Cr3+, ascribed to weak ion-framework interactions, with high selectivity and sensitivity and low detection limit.

Gels based on calcium alginate/pillared bentonite: structural characterization and their use as cadmium removal agent.

In this work, calcium alginate hydrogels with natural and pillared bentonites (0.5 and 5% w/w) were synthetized in two geometries (disks and beads) and their capacity to adsorb cadmium ion from aqueous media was evaluated. Pillarization effect on bentonite morphology was evidenced by SEM, XRD, LD and BET isotherms. Structure and swelling capacity of hydrogels were determined, showing that hydrogels beads with pillared clays presented the higher ability to retain water. Regarding cadmium adsorption capacity, the effect of pH media (3, 5 and 7), the contact time (0 to 320 min.) and the initial cadmium ion concentration (6 to 42 mg/L) were studied employing hydrogel beads. Regardless bentonite type and concentration, the optimal pH cadmium adsorption was 7, reaching the highest adsorption capacity (93%) for hydrogel with 0.5% natural bentonite. Besides, the equilibrium adsorption time was reached at 120 min for all studied hydrogels and experimental data fitted with a pseudo-second order kinetic model.

Physics of surface vibrational resonances: pillared phononic crystals, metamaterials, and metasurfaces.

The introduction of engineered resonance phenomena on surfaces has opened a new frontier in surface science and technology. Pillared phononic crystals, metamaterials, and metasurfaces are an emerging class of artificial structured media, featuring surfaces that consist of pillars-or branching substructures-standing on a plate or a substrate. A pillared phononic crystal exhibits Bragg band gaps, while a pillared metamaterial may feature both Bragg band gaps and local resonance hybridization band gaps. These two band-gap phenomena, along with other unique wave dispersion characteristics, have been exploited for a variety of applications spanning a range of length scales and covering multiple disciplines in applied physics and engineering, particularly in elastodynamics and acoustics. The intrinsic placement of pillars on a semi-infinite surface-yielding a metasurface-has similarly provided new avenues for the control and manipulation of wave propagation. Classical waves are admitted in pillared media, including Lamb waves in plates and Rayleigh and Love waves along the surfaces of substrates, ranging in frequency from hertz to several gigahertz. With the presence of the pillars, these waves couple with surface resonances richly creating new phenomena and properties in the subwavelength regime and in some applications at higher frequencies as well. At the nanoscale, it was shown that atomic-scale resonances-stemming from nanopillars-alter the fundamental nature of conductive thermal transport by reducing the group velocities and generating mode localizations across the entire spectrum of the constituent material well into the terahertz regime. In this article, we first overview the history and development of pillared materials, then provide a detailed synopsis of a selection of key research topics that involve the utilization of pillars or similar branching substructures in different contexts. Finally, we conclude by providing a short summary and some perspectives on the state of the field and its promise for further future development.

Separation of Xylene Isomers in the Anion-Pillared Square Grid Material SIFSIX-1-Cu.

Xylene isomer separation is considered one of the seven separation challenges that changed the world. In addition, the high-energy demand of xylene separation highlights the need for efficient novel adsorbents. Herein, the liquid-phase separation potential of the anion-pillared hybrid material SIFSIX-1-Cu was studied for preferential adsorption of o-xylene and m-xylene over p-xylene, which was inspired by a previous complexation crystallization method for separating m-xylene. We report detailed experimental liquid-phase adsorption experiments, yielding selectivities of 3.0 for o-xylene versus p-xylene and 2.6 for m-xylene versus p-xylene. Our theoretical calculations thus provide a reasonable explanation that the xylene adsorption selectivity is attributed to the C-H⋅⋅⋅F interaction, and the host-guest interaction order agrees with the adsorption priority: o-xylene > m-xylene > p-xylene.

Zinc(II)-Organic Framework Films with Thermochromic and Solvatochromic Applications.

Multiple-stimuli-responsive photoluminescence films based on a ZnII -organic framework, {[Zn2 (Htpim)(3,4-pydc)2 ]⋅4 DMF⋅4 H2 O}n (1, Htpim=2,4,5-tri(4-pyridyl)imidazole, 3,4-H2 pydc=3,4-pyridinedicarboxylic acid), were fabricated. This compound consisted of a 2D corrugated layer, {Zn(3,4-pydc)}n , which was further pillared using a Y-shaped pillar N-donor ligand (Htpim) to form a 3D-pillared-layer framework with 1D open channels. The rectangular channels in the as-synthesized compound are fully occupied by guest DMF and H2 O molecules. The framework exhibits instant and reversible thermochromic properties corresponding to the removal of different H2 O and DMF guest molecules as temperature increases. The pale-yellow crystal undergoes significant redshifting to a greenish emission centered at 530 nm. Compound 1 also showed remarkable solvatochromic effects in the presence of various organic solvents without affecting its structural integrity. In addition, polycrystalline MOF films were grown on an α-Al2 O3 support for switchable and fast-response thermochromic and solvatochromic sensors.

Competing Roles of Two Kinds of Ligand during Nonclassical Crystallization of Pillared-Layer Metal-Organic Frameworks Elucidated Using Microfluidic Systems.

To diversify metal-organic frameworks (MOFs), multi-component MOFs constructed from more than two kinds of bridging ligand have been actively investigated due to the high degree of design freedom afforded by the combination of multiple ligands. Predicting the synthesis conditions for such MOFs requires an understanding of the crystallization mechanism, which has so far remained elusive. In this context, microflow systems are efficient tools for capturing non-equilibrium states as they facilitate precise and efficient mixing with reaction times that correspond to the distance from the mixing point, thus enabling reliable control of non-equilibrium crystallization processes. Herein, we prepared coordination polymers with pillared-layer structures and observed the intermediates in the syntheses with an in-situ measurement system that combines microflow reaction with UV/Vis and X-ray absorption fine-structure spectroscopies, thereby enabling their rapid nucleation to be monitored. Based on the results, a three-step nonclassical nucleation mechanism involving two kinds of intermediate is proposed.

Pillared graphene oxide composite as an adsorbent of soluble hydrocarbons in water: pH and organic matter effects.

Graphene oxide (GO) is a single-atom-thick sheet of carbon with oxygen-containing functional groups decorating its basal plane and edge sites. Most of its high surface area can be lost due to restacking of individual layers during the synthesis and drying of GO-based bulk sorbents. There is great interest to increase the specific surface area of graphene-based sorbents by introducing organic molecules as "pillaring agents" between GO sheets to hinder the stacking process and create sorbents with elevated surface area. This work synthesizes pillared GO by introducing chitosan (CS), a linear polysaccharide with various molecular weights. A composite of low molecular weight CS at a CS/GO ratio of 0.1 is shown to have the highest specific surface area (up to 70.5 m2/g) in comparison to the medium and high CS molecular weight, pristine GO, and the CS/GO composite materials. The affinity of the optimized GO/CS composites towards benzene, toluene, and naphthalene was evaluated at 19.3 mg/L of organic matter content while altering pH. Sips and Langmuir adsorption isotherm models well described the adsorption behavior, and benzene adsorption performance was reduced at low pH. Related to the presence of dissolved organic matter (DOM) in solution, lower diffusivity constants (k1) in hydrocarbon systems were recorded. Our results demonstrate the feasibility of CS as a potential pillaring agent in CS/GO composites to increase specific surface area and enhance the capture of soluble hydrocarbons from aqueous solutions.

Local Structures of Two-Dimensional Zeolites-Mordenite and ZSM-5-Probed by Multinuclear NMR.

Mesostructured pillared zeolite materials in the form of lamellar phases with a crystal structure of mordenite (MOR) and ZSM-5 (MFI) were grown using CTAB as an agent that creates mesopores, in a one-pot synthesis; then into the CTAB layers separating the 2D zeolite plates were introduced by diffusion the TEOS molecules which were further hydrolyzed, and finally the material was annealed to remove the organic phase, leaving the 2D zeolite plates separated by pillars of silicon dioxide. To monitor the successive structural changes and the state of the atoms of the zeolite framework and organic compounds at all the steps of the synthesis of pillared MOR and MFI zeolites, the nuclear magnetic resonance method (NMR) with magic angle spinning (MAS) was applied. The 27Al and 29Si MAS NMR spectra confirm the regularity of the zeolite frameworks of the as synthetized materials. Analysis of the 1H and 13C MAS NMR spectra and an experiment with variable contact time evidence a strong interaction between the charged "heads" -[N(CH3)3]+ of CTAB and the zeolite framework at the place of [AlO4]- location. According to 27Al and 29Si MAS NMR the evacuation of organic cations leads to a partial but not critical collapse of the local zeolite structure.

Hydrogen-Bonding Linkers Yield a Large-Pore, Non-Catenated, Metal-Organic Framework with pcu Topology.

Pillared paddle-wheel-based metal-organic framework (MOF) materials are an attractive target as they offer a reliable method for constructing well-defined, multifunctional materials. A drawback of these materials, which has limited their application, is their tendency to form catenated frameworks with little accessible volume. To eliminate this disadvantage, it is necessary to investigate strategies for constructing non-catenated pillared paddle-wheel MOFs. Hydrogen-bonding substituents on linkers have been postulated to prevent catenation in certain frameworks and, in this work, we present a new MOF to further bolster this theory. Using 2,2'-diamino-[1,1'-biphenyl]-4,4'-dicarboxylic acid, BPDC-(NH2)2, linkers and dipyridyl glycol, DPG, pillars, we assembled a MOF with pcu topology. The new material is non-catenated, exhibiting large accessible pores and low density. To the best of our knowledge, this material constitutes the pcu framework with the largest pore volume and lowest density. We attribute the lack of catenation to the presence of H-bonding substituents on both linkers.

Separation of Xe from Kr with Record Selectivity and Productivity in Anion-Pillared Ultramicroporous Materials by Inverse Size-Sieving.

The separation of xenon/krypton (Xe/Kr) mixture is of great importance to industry, but the available porous materials allow the adsorption of both, Xe and Kr only with limited selectivity. Herein we report an anion-pillared ultramicroporous material NbOFFIVE-2-Cu-i (ZU-62) with finely tuned pore aperture size and structure flexibility, which for the first time enables an inverse size-sieving effect in separation along with record Xe/Kr selectivity and ultrahigh Xe capacity. Evidenced by single-crystal X-ray diffraction, the rotation of anions and pyridine rings upon contact of larger-size Xe atoms adapts cavities to the shape/size of Xe and allows strong host-Xe interaction, while the smaller-size Kr is excluded. Breakthrough experiments confirmed that ZU-62 has a real practical potential for producing high-purity Kr and Xe from air-separation byproducts, showing record Kr productivity (206 mL g-1 ) and Xe productivity (42 mL g-1 , in desorption) as well as good recyclability.

Pharmacokinetic evaluation of medicinally important synthetic N,N' diindolylmethane glucoside: Improved synthesis and metabolic stability.

An improved route for the synthesis of N,N'-diindolyl methane (DIM) glycosides has been developed by using Fe/Al pillared clay catalyst. In-silico pharmacokinetics followed by in-vitro studies like aqueous solubility, lipophilicity, P-glycoprotein (P-gp) dependent ATPase activity, permeability, plasma protein binding, RBC partitioning, metabolic stability in different liver microsomes and its in-vitro-in-vivo extrapolation were conducted for the most potent derivative namely NGD16. The compound was found to have low solubility, optimum lipophilicity, no P-gp inhibitory activity, intermediate permeability, high plasma protein binding, low RBC partitioning, acceptable metabolic stability in rat liver microsomes (RLM) as well as human liver microsomes (HLM) with intermediate hepatic extraction ratio.

The High Efficiency of Anionic Dye Removal Using Ce-Al13/Pillared Clay from Darbandikhan Natural Clay.

Natural clay from Darbandikhan (DC) was evaluated in its natural form, after acid activation (ADC), and after pillaring (PILDC) as a potential adsorbent for the adsorption of methyl orange (MO) as a model anionic dye adsorbate. The effect of different clay treatments was investigated using X-Ray Diffraction (XRD), X-Ray Fluorescence (XRF), Scanning Electron Microscope (SEM) and Fourier-Transform Infrared Spectroscopy (FT-IR), and N2 physisorption analysis. Both acid activation and pillaring resulted in a significant increase in adsorption affinity, respectively. The adsorption favored acidic pH for the anionic dye (MO). The adsorption process was found to follow pseudo-second-order kinetics with activation energies of 5.9 and 40.1 kJ·mol-1 for the adsorption of MO on ADC and PILDC, respectively, which are characteristic of physical adsorption. The adsorption isotherms (Langmuir, Redlich-Peterson and Freundlich) were fitted well to the experimental data. The specific surface area of the natural clay was very low (22.4 m2·g-1) compared to high-class adsorbent materials. This value was increased to 53.2 m2·g-1 by the pillaring process. Nevertheless, because of its local availability, the activated materials may be useful for the cleaning of local industrial wastewaters.

Application of a Pillared-Layer Zn-Triazolate Metal-Organic Framework in the Dispersive Miniaturized Solid-Phase Extraction of Personal Care Products from Wastewater Samples.

The pillared-layer Zn-triazolate metal-organic framework (CIM-81) was synthesized, characterized, and used for the first time as a sorbent in a dispersive micro-solid phase extraction method. The method involves the determination of a variety of personal care products in wastewaters, including four preservatives, four UV-filters, and one disinfectant, in combination with ultra-high performance liquid chromatography and UV detection. The CIM-81 MOF, constructed with an interesting mixed-ligand synthetic strategy, demonstrated a better extraction performance than other widely used MOFs in D-µSPE such as UiO-66, HKUST-1, and MIL-53(Al). The optimization of the method included a screening design followed by a Doehlert design. Optimum conditions required 10 mg of CIM-81 MOF in 10 mL of the aqueous sample at a pH of 5, 1 min of agitation by vortex and 3 min of centrifugation in the extraction step; and 1.2 mL of methanol and 4 min of vortex in the desorption step, followed by filtration, evaporation and reconstitution with 100 µL of the initial chromatographic mobile phase. The entire D-µSPE-UHPLC-UV method presented limits of detection down to 0.5 ng·mL-1; intra-day and inter-day precision values for the lowest concentration level (15 ng·mL-1)-as a relative standard deviation (in %)-lower than 8.7 and 13%, respectively; average relative recovery values of 115%; and enrichment factors ranging from ~3.6 to ~34. The reuse of the CIM-81 material was assessed not only in terms of maintaining the analytical performance but also in terms of its crystalline stability.

Merger of Energetic Affinity and Optimal Geometry Provides New Class of Boron Nitride Based Sorbents with Unprecedented Hydrogen Storage Capacity.

Hydrogen is an ideal synthetic fuel because it is lightweight, abundant and its oxidation product (water) is environmentally benign. However, its utilization is impeded by the lack of an efficient storage device. A new building block approach is proposed for an exhaustive search of optimal hydrogen uptakes in a series of low density boron nitride (BN) nanoarchitectures via extensive 3868 ab initio-based multiscale simulations. By probing various geometries, temperatures, pressures, and doping ratios, these results demonstrate a maximum uptake of 8.65 wt% at 300 K, the highest hydrogen uptake on sorbents at room temperature without doping. Li+ doping of the nanoarchitectures offers a set of optimal combinations of gravimetric and volumetric uptakes, surpassing the US Department of Energy targets. These findings suggest that the merger of energetic affinity and optimal geometry in BN building blocks overcomes the intrinsic limitations of sorbent materials, putting hybrid BN nanoarchitectures on equal footing with hydrides while demonstrating a superior capacity-kinetics-thermodynamics relationship.