60Co-γ Irradiation-Induced Shift and Polarity Reversal in the Triboelectric Series of Poly(ether sulfone)s.

The sensitivity of triboelectric nanogenerators (TENGs) to the surface charge density highlights the significance of triboelectric materials and their modifications. Efforts have been directed toward developing effective strategies for increasing the surface charge density, expanding the potential applications of TENGs. This study proposes the use of irradiation technology for grafting to modify the electron-donating capability of poly(ether sulfone) (PES), thereby affording a dual benefit of enhancing the surface charge density and inducing a shift in the position of PES from negative to positive within the triboelectric series. The TENG based on grafted PES has resulted in a significant 3-fold increase in surface charge density compared to that of pristine PES, reaching 263 µC m-2. The surface charge density can be further increased to 502 µC m-2 through charge pumping. Notably, irradiation technology presents advantages over chemical grafting methods, particularly in terms of sustainability and environmental friendliness. This innovative approach shows great potential in advancing the domain of TENGs.

Achieving bi-directional conduction block during catheter ablation is not enough to prevent recurrence of cavo-tricuspid isthmus dependant atrial flutter: Role of subclinical conduction.

BACKGROUND: Achieving bi-directional conduction block, as assessed by differential pacing and change in activation along tricuspid annulus (TA), across the cavo-tricuspid isthmus (CTI), is considered a satisfactory end point during catheter ablation of atrial flutter (AFL). AIM: To assess role of subclinical conduction by observing polarity reversal of local bipolar signals from RS to QR pattern lateral to the line of ablation, in predicting recurrence of CTI dependant AFL after ablation in patients with bidirectional conduction block. METHOD AND RESULTS: Of 683 patients undergoing ablation of CTI dependent AFL, 73 (10.6%) patients underwent redo flutter ablation and were evaluated further. The mean age was 60.8 years and 51% were males. Evidence of bidirectional block by differential pacing and change is activation along multipolar catheter and reversal of local bipolar signals from RS to QR pattern lateral to the line of ablation, during the 1st and subsequent procedure, were studied. 60% patients had confirmed bidirectional block of which 71% had lack of voltage reversal, at the end of 1st procedure. All patients with bidirectional block with lack of reversal of bipolar signals, after the first procedure had recurrence of AFL whereas only 3/11 (27%) people with bidirectional block and with absence of subclinical conduction had recurrence of AFL. CONCLUSION: Achieving bidirectional conduction block is not sufficient to prevent recurrence of AFL after CTI ablation. Reversal of local bipolar signals, from RS to QR pattern along with achieving bidirectional conduction delay would reduce recurrence of AFL, post ablation.

Temporal frequency dependence of the polarity inversion between upper and lower visual field in the pattern-onset steady-state visual evoked potential.

PURPOSE: According to the cruciform model, the upper and lower halves of the visual field representation in the primary visual cortex are located mainly on the opposite sides of the calcarine sulcus. Such a shape would have consequences for the surface-recorded visual evoked potential (VEP), as V1 responses to stimulation of the upper and lower hemifield manifest with opposite polarity (i.e., polarity inversion). However, the steady-state VEP results from a complex superposition of response components from different cortical sources, which can obscure the inversion of polarity. The present study assesses the issue for different stimulation frequencies which result in different patterns of superposition in the steady-state response. METHODS: Sequences of brief pattern-onset stimuli were presented at different stimulation rates ranging from 2 Hz (transient VEP) to 13 Hz (steady-state VEP). The upper and lower hemifields were tested separately and simultaneously. The data were assessed both in the time domain and in the frequency domain. RESULTS: Comparing the responses to the stimulation of upper and lower hemifield, polarity inversion was present within a limited time interval following individual stimulus onsets. With increasing frequency, this resulted in an approximate inversion of the full steady-state response and consequently in a phase shift of approximately 180° in the time-domain response. Polarity inversion was more prominent at electrode Pz, also for transient responses. Our data also demonstrated that the sum of the hemifield responses is a good approximation of the full-field response. CONCLUSION: While the basic phenomenon of polarity inversion occurs irrespective of the stimulus frequency, its relative impact on the steady-state response as a whole is the largest for high stimulation rates. We propose that this is because longer-lasting response components from other visual areas are not well represented in the steady-state VEP at higher frequencies.

Comprehensive Comparisons between Directing and Alternating Current Electrolysis in Organic Synthesis.

Organic electrosynthesis has consistently aroused significant interest within both academic and industrial spheres. Despite the considerable progress achieved in this field, the majority of electrochemical transformations have been conducted through the utilization of direct-current (DC) electricity. In contrast, the application of alternating current (AC), characterized by its polarity-alternating nature, remains in its infancy within the sphere of organic synthesis, primarily due to the absence of a comprehensive theoretical framework. This minireview offers an overview of recent advancements in AC-driven organic transformations and seeks to elucidate the differences between DC and AC electrolytic methodologies by probing into their underlying physical principles. These differences encompass the ability of AC to preclude the deposition of metal catalysts, the precision in modulating oxidation and reduction intensities, and the mitigation of mass transfer processes.

Structural characterization of Myxococcus xanthus MglC, a component of the polarity control system, and its interactions with its paralog MglB.

The δ-proteobacteria Myxococcus xanthus displays social (S) and adventurous (A) motilities, which require pole-to-pole reversal of the motility regulator proteins. Mutual gliding motility protein C (MglC), a paralog of GTPase-activating protein Mutual gliding motility protein B (MglB), is a member of the polarity module involved in regulating motility. However, little is known about the structure and function of MglC. Here, we determined ∼1.85 Å resolution crystal structure of MglC using Selenomethionine Single-wavelength anomalous diffraction. The crystal structure revealed that, despite sharing <9% sequence identity, both MglB and MglC adopt a Regulatory Light Chain 7 family fold. However, MglC has a distinct ∼30° to 40° shift in the orientation of the functionally important α2 helix compared with other structural homologs. Using isothermal titration calorimetry and size-exclusion chromatography, we show that MglC binds MglB in 2:4 stoichiometry with submicromolar range dissociation constant. Using small-angle X-ray scattering and molecular docking studies, we show that the MglBC complex consists of a MglC homodimer sandwiched between two homodimers of MglB. A combination of size-exclusion chromatography and site-directed mutagenesis studies confirmed the MglBC interacting interface obtained by molecular docking studies. Finally, we show that the C-terminal region of MglB, crucial for binding its established partner MglA, is not required for binding MglC. These studies suggest that the MglB uses distinct interfaces to bind MglA and MglC. Based on these data, we propose a model suggesting a new role for MglC in polarity reversal in M. xanthus.

Plasticity of the spinal glymphatic system in male SD rats with painful diabetic neuropathy induced by type 2 diabetes mellitus.

The glymphatic system is a recently discovered glial-dependent macroscopic interstitial waste clearance system that promotes the efficient elimination of soluble proteins and metabolites from the central nervous system. Its anatomic foundation is the astrocytes and aquaporin-4 (AQP4) water channels on the endfeet of astrocytes. The aim of this study is to evaluate the plasticity of the spinal glymphatic system in male SD rats with painful diabetic neuropathy (PDN) induced by type 2 diabetes mellitus. PDN rats were modeled under a high-fat and high-glucose diet with a low dose of streptozotocin. MRI was applied to observe the infiltration and clearance of contrast to indicate the functional variability of the glymphatic system at the spinal cord level. The paw withdrawal threshold was used to represent mechanical allodynia. The numerical change of glial fibrillary acidic protein (GFAP) positive astrocytes was assessed and the polarity reversal of AQP4 protein was measured by immunofluorescence. As a result, deceased contrast infiltration and clearance, enhanced mechanical allodynia, increased number of GFAP positive astrocytes, and reversed polarity of AQP4 protein were found in the PDN rats. The above molecular level changes may contribute to the impairment of the spinal glymphatic system in PDN rats. This study revealed the molecular and functional variations of the spinal glymphatic system in PDN rats and for the first time indicated that there might be a correlation between the impaired spinal glymphatic system and PDN rats.

Long-term Solar Activity Studies using Microwave Imaging Observations and Prediction for Cycle 25.

We use microwave imaging observations from the Nobeyama Radioheliograph at 17 GHz for long-term studies of solar activity. In particular, we use the polar and low-latitude brightness temperatures as proxies to the polar magnetic field and the active-regions, respectively. We also use the location of prominence eruptions as a proxy to the filament locations as a function of time. We show that the polar microwave brightness temperature is highly correlated with the polar magnetic field strength and the fast solar wind speed. We also show that the polar microwave brightness at one cycle is correlated with the low latitude brightness with a lag of about half a solar cycle. We use this correlation to predict the strength of the solar cycle: the smoothed sunspot numbers in the southern and northern hemispheres can be predicted as 89 and 59, respectively. These values indicate that cycle 25 will not be too different from cycle 24 in its strength. We also combined the rush to the pole data from Nobeyama prominences with historical data going back to 1860 to study the north-south asymmetry of sign reversal at solar poles. We find that the reversal asymmetry has a quasi-periodicity of 3-5 cycles.

Electrocoagulation with polarity switch for fast oil removal from oil in water emulsions.

An electrocoagulation technique using a 3.5 L reactor, with aluminum electrodes in a monopolar arrangement with polarity switch at each 10 s was used to separate oil from synthetic oily water similar in oil concentration to produced water from offshore platforms. Up to 98% of oil removal was achieved after 20 min of processing. Processing time dependence of the oil removal and pH was measured and successfully adjusted to exponential models, indicating a pseudo first order behavior. Statistical analysis was used to prove that electrical conductivity and total solids depend significantly on the concentration of electrolyte (NaCl) in the medium. Oil removal depends mostly on the distance between the electrodes but is proportional to electrolyte concentration when initial pH is 8. Electrocoagulation with polarity switch maximizes the lifetime of the electrodes. The process reduced oil concentration to a value below that stipulated by law, proving it can be an efficient technology to minimize the offshore drilling impact in the environment.

Visible-Light-Mediated Metal-Free Hydrosilylation of Alkenes through Selective Hydrogen Atom Transfer for Si-H Activation.

Although there has been significant progress in the development of transition-metal-catalyzed hydrosilylations of alkenes over the past several decades, metal-free hydrosilylation is still rare and highly desirable. Herein, we report a convenient visible-light-driven metal-free hydrosilylation of both electron-deficient and electron-rich alkenes that proceeds through selective hydrogen atom transfer for Si-H activation. The synergistic combination of the organophotoredox catalyst 4CzIPN with quinuclidin-3-yl acetate enabled the hydrosilylation of electron-deficient alkenes by selective Si-H activation while the hydrosilylation of electron-rich alkenes was achieved by merging photoredox and polarity-reversal catalysis.

Positioning of polarity formation by extracellular signaling during asymmetric cell division.

Anterior-posterior (AP) polarity formation of cell membrane proteins plays a crucial role in determining cell asymmetry, which ultimately generates cell diversity. In Caenorhabditis elegans, a single fertilized egg cell (P0), its daughter cell (P1), and the germline precursors (P2 and P3 cells) form two exclusive domains of different PAR proteins on the membrane along the anterior-posterior axis. However, the phenomenon of polarity reversal has been observed in which the axis of asymmetric cell division of the P2 and P3 cells is formed in an opposite manner to that of the P0 and P1 cells. The extracellular signal MES-1/SRC-1 has been shown to induce polarity reversal, but the detailed mechanism remains elusive. Here, using a mathematical model, I explore the mechanism by which MES-1/SRC-1 signaling can induce polarity reversal and ultimately affect the process of polarity formation. I show that a positive correlation between SRC-1 and the on-rate of PAR-2 is the essential mechanism underlying polarity reversal, providing a mathematical basis for the orientation of cell polarity patterns.

Separable effects of inversion and contrast-reversal on face detection thresholds and response functions: a sweep VEP study.

The human brain rapidly detects faces in the visual environment. We recently presented a sweep visual evoked potential approach to objectively define face detection thresholds as well as suprathreshold response functions (Ales, Farzin, Rossion, & Norcia, 2012). Here we determined these parameters are affected by orientation (upright vs. inverted) and contrast polarity (positive vs. negative), two manipulations that disproportionately disrupt the perception of faces relative to other object categories. Face stimuli parametrically increased in visibility through phase-descrambling while alternating with scrambled images at a fixed presentation rate of 3 Hz (6 images/s). The power spectrum and mean luminance of all stimuli were equalized. As a face gradually emerged during a stimulation sequence, EEG responses at 3 Hz appeared at ≈35% phase coherence over right occipito-temporal channels, replicating previous observations. With inversion and contrast-reversal, the 3-Hz amplitude decreased by ≈20%-50% and the face detection threshold increased by ≈30%-60% coherence. Furthermore, while the 3-Hz response emerged abruptly and saturated quickly for normal faces, suggesting a categorical neural response, the response profile for inverted and negative polarity faces was shallower and more linear, indicating gradual and continuously increasing activation of the underlying neural population. These findings demonstrate that inversion and contrast-reversal increase the threshold and modulate the suprathreshold response function of face detection.

C-H bond activation by f-block complexes.

Most homogeneous catalysis relies on the design of metal complexes to trap and convert substrates or small molecules to value-added products. Organometallic lanthanide compounds first gave a tantalizing glimpse of their potential for catalytic C-H bond transformations with the selective cleavage of one C-H bond in methane by bis(permethylcyclopentadienyl)lanthanide methyl [(η(5) -C5 Me5 )2 Ln(CH3 )] complexes some 25 years ago. Since then, numerous metal complexes from across the periodic table have been shown to selectively activate hydrocarbon C-H bonds, but the challenges of closing catalytic cycles still remain; many f-block complexes show great potential in this important area of chemistry.

MiR-30c suppresses the proliferation, metastasis and polarity reversal of tumor cell clusters by targeting MTDH in invasive micropapillary carcinoma of the breast.

Purpose: Invasive micropapillary carcinoma (IMPC) of the breast has a high propensity for lymphovascular invasion and axillary lymph node metastasis and displays an 'inside-out' growth pattern, but the molecular mechanism of invasion, metastasis and cell polarity reversal in IMPC is unclear. Methods: and Patients: Cell growth curves, tumor sphere formation assays, transwell assays, mouse xenograft model and immunofluorescence were evaluated to investigate the effects of miR-30c and MTDH. Dual luciferase reporter assays was performed to confirm that the MTDH (metadherin) 3'UTR bound to miR-30c. MiRNA in situ hybridization (ISH) and immunohistochemistry (IHC) were carried out on IMPC patient tissues for miR-30c and MTDH expression, respectively. Results: We found miR-30c as a tumor suppressor gene in cell proliferation, metastasis and polarity reversal of IMPC. Overexpression of miR-30c inhibited cell growth and metastasis in vitro and in vivo. MiR-30c could directly target the MTDH 3'UTR. MiR-30c overexpression inhibited breast cancer cell proliferation, invasion and metastasis by targeting MTDH. Moreover, miR-30c/MTDH axis could also regulate cell polarity reversal of IMPC. By ISH and IHC analyses, miR-30c and MTDH were significantly correlated with tumor size, lymph nodule status and tumor grade, the 'inside-out' growth pattern, overall survival (OS) and disease-free survival (DFS) in IMPC patients. Conclusions: Overall, miR-30c/MTDH axis was responsible for tumor proliferation, metastasis and polarity reversal. It may provide promising therapeutic targets and prognostic biomarkers for patients with IMPC.

Construction of an effective method combining in situ capping with electric field-enhanced biodegradation for treating PAH-contaminated soil at abandoned coking sites.

The simultaneous application of in situ capping and electro-enhanced biodegradation may be a suitable method for ensuring the feasibility and safety of reusing abandoned coking sites. However, the capping layer type and applied electric field pattern may affect the efficiency of sequestering and removing pollutants. This study investigated changes in electric current, soil moisture content and pH, polycyclic aromatic hydrocarbon (PAH) concentration, bacterial number, and microbial community structure and metabolic function during soil remediation at abandoned coking plant sites under different applied electric field patterns and barrier types. The results indicated that polarity-reversal electric field was more conducive to maintaining electric current, soil properties, resulting in higher microbial number, community diversity, and functional gene abundance. At 21d, the mean PAH concentrations in contaminated soil, the capping layer's clean soil and barrier were 78.79, 7.56, and 1.57 mg kg-1 lower than those with a unidirectional electric field, respectively. The mean degradation rate of PAHs in the bio-barrier was 10.12 % higher than that in the C-Fe barrier. In the experiment combining a polarity-reversal electric field and a bio-barrier, the mean PAH concentrations in contaminated soil and the capping layer were 706.68 and 27.15 mg kg-1 lower than those in other experiments, respectively, and no PAHs were detected in the clean soil, demonstrating that the combination of the polarity-reversal electric field and the bio-barrier was effective in treating soil at abandoned coking plant sites. The established method of combining in situ capping with electro-enhanced biodegradation will provide technical support for the treatment and reuse of heavily PAH-contaminated soil at abandoned coking plant sites.

The role of the current waveform in mitigating passivation and enhancing electrocoagulation performance: A critical review.

Electrocoagulation (EC) can be an efficient alternative to existing water and wastewater treatment methods due to its eco-friendly nature, low footprint, and facile operation. However, the electrodes applied in the EC process suffer from passivation or fouling, an issue resulting from the buildup of poorly conducting materials on the electrode surface. Indeed, such passivation gives rise to various operational problems and restricts the practical implementation of EC on a large scale. Therefore, it has been suggested that using pulsed direct current (PDC), alternating pulse current (APC), and sinusoidal alternating current (AC) waveforms in EC as alternatives to conventional direct current (DC) can help mitigate passivation and alleviate its associated detrimental effects. This paper presents a critical review of the impact of the current waveform on the EC process towards the capabilities of the PDC, APC, and AC waveforms in de-passivation and performance enhancement while comparing them to the conventional DC. Additionally, current waveform parameters influencing the surface passivation of electrodes and process efficiency are elaborately discussed. Meanwhile, the performance of the EC process is evaluated under different current waveforms based on pollutant removal efficiency, energy consumption, electrode usage, sludge production, and operating cost. The proper current waveforms for treating various water and wastewater matrices are also explained. Finally, concluding remarks and outlooks for future research are provided.

Effect of polarity reversal on floc formation and rheological properties of a sludge formed by the electrocoagulation process.

Anode fouling is one of the key limiting factors to the widespread application of electrocoagulation (EC) for treatment of different types of contaminated water. Promising mitigation strategy to fouling is to operate the process under polarity reversal (PR) instead of direct current (DC). However, the PR operation comes at the cost of process complexity due to the alternation of electrochemical and chemical reactions. In this study, we systematically investigated the link between evolving fouling layer during DC and PR close to iron and aluminum electrodes and morphological and rheological properties of the formed sludge. By operando visualization of EC process, we demonstrate that during PR operation, precipitation of the iron and aluminum species occurs close to the anode interface, resulting in flocs with higher porosity and lower density than those formed under DC conditions. However, rheological investigation revealed that the PR conditions resulted in a sludge with more pronounced solid-like signature, but this enhancement in its viscoelastic properties is closely related to a period of the current's polarity reversal. We attribute this unexpected result to higher shear rate and collision of particles during PR conditions.

Migration and Removal of Labile Cadmium Contaminants in Paddy Soils by Electrokinetic Remediation without Changing Soil pH.

Electrokinetic remediation (EKR) is a viable, advanced cleaning strategy that can permanently reduce the toxicity of soil contaminants. However, EKR is prone to causing changes in soil pH. The negative impacts must be minimized if field-scale application is to be realized. In this study, EKR with polarity reversal was used to avoid soil pH polarization and to clean up cadmium (Cd)-contaminated paddy soils. Results showed that Cd desorbed from oxidizable and residual fractions to labile and easily available parts. Soil moisture content above 0.35 g g-1 was conductive to achieving the desirable Cd-migration rate. The exchangeable Cd phase eventually migrated from both ends of that soil compartment towards the intermediate. Moreover, the addition of citric acid at the concentration of 0.1 mol L-1 was an effective enhancement strategy. The methodology enriched Cd contaminants to specific sites. The technology can be used for electrokinetic-assisted phytoremediation during the rice growing period. Hyperaccumulator is planted in the intermediate area to remove the Cd contaminants. On the other hand, Cd removal is achieved in the region close to the electrodes. The present study provides a theoretical basis for in situ remediation. It has a wider significance for field-scale application.

Electrochemical water softening as pretreatment for nitrate electro bioremediation.

Electro bioremediation is gaining interest as a sustainable treatment for contaminated groundwater. Nevertheless, the investigation is still at the laboratory level, and before their implementation is necessary to overcome important drawbacks. A prevalent issue is the high groundwater hardness that generates scale deposition on electrodes that irreversibly affects the treatment effectiveness and their lifetime. For this reason, the present study evaluated a novel and sustainable approach combining electrochemical water softening as a preliminary step for electro bioremediation of nitrate-contaminated groundwater. Batch mode tests were performed at mL-scale to determine the optimum reactor configuration (single- or two-chambers) and the suitable applied cathode potential for electrochemical softening. A single-chamber reactor working at a cathode potential of -1.2 V vs. Ag/AgCl was chosen. Continuous groundwater softening under this configuration achieved a hardness removal efficiency of 64 ± 4% at a rate of 305 ± 17 mg CaCO3 m-2cathode h-1. The saturation index at the effluent of the main minerals susceptible to precipitate (aragonite, calcite, and brucite) was reduced up to 90%. Softening activity plummeted after 13 days of operation due to precipitate deposition (mostly calcite) on the cathode surface. Polarity reversal periods were considered to detach the precipitated throughout the continuous operation. Their implementation every 3-4 days increased the softening lifetime by 48%, keeping a stable hardness removal efficiency. The nitrate content of softened groundwater was removed in an electro bioremediation system at a rate of 1269 ± 30 g NO3- m-3NCC d-1 (97% nitrate removal efficiency). The energy consumption of the integrated system (1.4 kWh m-3treated) confirmed the competitiveness of the combined treatment and paves the ground for scaling up the process.

ß-Hydroxybutyrate Attenuates Painful Diabetic Neuropathy via Restoration of the Aquaporin-4 Polarity in the Spinal Glymphatic System.

Waste removal is essential for maintaining homeostasis and the normal function of the central nervous system (CNS). The glymphatic system based on aquaporin-4 (AQP4) water channels on the endfeet of astrocytes is recently discovered as the excretion pathway for metabolic waste products of CNS. In the CNS, α-syntrophin (SNTA1) directly or indirectly anchors AQP4 in astrocyte membranes facing blood vessels. Studies have indicated that ß-hydroxybutyrate (BHB) can raise the expression of SNTA1 and thus restoring AQP4 polarity in mice models with Alzheimer's disease. The study aims to evaluate the neuroprotective mechanism of BHB in rats with painful diabetic neuropathy (PDN). PDN rats were modeled under a high-fat and high-glucose diet with a low dose of streptozotocin. Magnetic resonance imaging (MRI) was applied to observe the clearance of contrast to indicate the functional variability of the spinal glymphatic system. Mechanical allodynia was assessed by paw withdrawal threshold. The expressions of SNTA1 and AQP4 were tested, and the polarity reversal of AQP4 protein was measured. As demonstrated, PDN rats were manifested with deceased contrast clearance of the spinal glymphatic system, enhanced mechanical allodynia, lower expression of SNTA1, higher expression of AQP4, and reversed polarity of AQP4 protein. An opposite change in the above characteristics was observed in rats being treated with BHB. This is the first study that demonstrated the neuroprotective mechanism of BHB to attenuate PDN via restoration of the AQP4 polarity in the spinal glymphatic system and provides a promising therapeutic strategy for PDN.

How does periodic polarity reversal affect the faradaic efficiency and electrode fouling during iron electrocoagulation?

Electrocoagulation (EC) is a promising electrochemical water treatment technology. However, a major challenge to sustaining effective long-term EC operation is controlling the precipitation of materials on the electrodes, commonly referred to as fouling. Periodically reversing electrode polarity has been suggested as an in-situ fouling mitigation strategy and is often implemented in EC field applications. However, the utility of this approach has not been investigated in detail. In this study, the effect of polarity reversal (PR) on the performance of EC using iron electrodes was examined under different water chemistry conditions and at a range of reversal frequencies. It was observed that the faradaic efficiency in PR-EC was always lower than that in the EC systems operated with a direct current (i.e., DC-EC). It was also observed that the faradaic efficiency progressively decreased as the current reversal frequency increased, with the faradaic efficiency dropping as low as 10% when the PR interval was 0.5 min. Results from fouling layer, chronopotentiometric, and cyclic voltammetric investigations indicated that the decrease in the faradaic efficiency was caused by (i) increased electrode fouling by iron precipitates and (ii) electrochemical side reactions at the electrode-electrolyte interface. The extent of these effects was dependent on the solution chemistry; oxyanions and sulfide were found to be particularly detrimental to the performance of PR-EC, causing severe electrode fouling while decreasing the faradaic efficiency. Fouling could be mitigated by increasing the solution convection rate, resulting in a shear on the electrode surface that removed iron and other electrochemically reactive species from the electrodes.