Effect of Sample Geometry on Graphitization of Polyacrylonitrile.

In this study, it is analyzed how sample geometry (spheres, nanofibers, or films) influences the graphitization behavior of polyacrylonitrile (PAN) molecules. The chemical bonding and changes in the composition of these three geometries are studied at the oxidation, carbonization, and graphitization stages via scanning electron microscopy (SEM), in situ thermogravimetric-infrared (TGA-IR) analysis, elemental analysis, Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). The influence of molecular alignment on the graphitization of the three sample geometries is investigated using synchrotron wide-angle X-ray diffraction (WAXD) and transmission electron microscopy (TEM). The effects of molecular alignment at different draw rates during spinning are explored in detail.

Interfacial Plasticization Strategy Enabling a Long-Cycle-Life Solid-State Lithium Metal Battery.

The limited ionic conductivity and unstable interface due to poor solid-solid interface pose significant challenges to the stable cycling of solid-state batteries (SSBs). Herein, an interfacial plasticization strategy is proposed by introducing a succinonitrile (SN)-based plastic curing agent into the polyacrylonitrile (PAN)-based composite polymer electrolytes (CPE) interface. The SN at the interface strongly plasticizes the PAN in the CPE, which reduces the crystallinity of the PAN drastically and enables the CPE to obtain a low modulus surface, but it still maintains a high modulus internally. The reduced crystallinity of PAN provides more amorphous regions, which are favorable for Li+ transport. The gradient modulus structure not only ensures intimate interfacial contact but also favors the suppression of Li dendrites growth. Consequently, the interfacial plasticized CPE (SF-CPE) obtains a high ionic conductivity of 4.8 × 10-4 S cm-1 as well as a high Li+ transference number of 0.61. The Li-Li symmetric cell with SF-CPE can cycle for 1000 h at 0.1 mA cm-2, the LiFeO4 (LFP)-Li full-cell demonstrates a high capacity retention of 86.1% after 1000 cycles at 1 C, and the LiCoO2 (LCO)-Li system also exhibits an excellent cycling performance. This work provides a novel strategy for long-life solid-state batteries.

Tunable electrospun scaffolds of polyacrylonitrile loaded with carbon nanotubes: from synthesis to biological applications.

Growing cells in a biomimetic environment is critical for tissue engineering as well as for studying the cell biology underlying disease mechanisms. To this aim a range of 3D matrices have been developed, from hydrogels to decellularized matrices. They need to mimic the extracellular matrix to ensure the optimal growth and function of cells. Electrospinning has gained in popularity due to its capacity to individually tune chemistry and mechanical properties and as such influence cell attachment, differentiation or maturation. Polyacrylonitrile (PAN) derived electrospun fibres scaffolds have shown exciting potential due to reports of mechanical tunability and biocompatibility. Building on previous work we fabricate here a range of PAN fibre scaffolds with different concentrations of carbon nanotubes. We characterize them in-depth in respect to their structure, surface chemistry and mechanical properties, using scanning electron microscopy, image processing, ultramicrotomic transmission electron microscopy, x-ray nanotomography, infrared spectroscopy, atomic force microscopy and nanoindentation. Together the data demonstrate this approach to enable finetuning the mechanical properties, while keeping the structure and chemistry unaltered and hence offering ideal properties for comparative studies of the cellular mechanobiology. Finally, we confirm the biocompatibility of the scaffolds using primary rat cardiomyocytes, vascular smooth muscle (A7r5) and myoblast (C2C12) cell lines.

Electrochemically Switchable Sulfurized Polyacrylonitrile for Controllable Recovery of Copper in Wastewater Based on Reversible Adsorption/Desorption Regulation.

Within the context of circular economy and industrial ecology, adsorption offers an effective manner for recycling resources from wastewater, but controllable desorption remains a challenge. Inspired by metal-thiol binding and reversible thiol-disulfide redox transformation in biological systems, this study reports the development of a reversible adsorption/desorption (RAD) system for controllable recovery of copper based on electrochemically switchable sulfurized polyacrylonitrile (SPAN). Density functional theory calculations offered theoretical prediction for the formation of S-Cu bonds and reversible weak interaction between S-S bonds and Cu2+. The SPAN anchored onto titanium suboxide ceramic foam (SPAN@TiSO) could regulate Cu2+ adsorption/desorption stimulated by the electrode potential, indicated by the adsorption capacity of 243.3 mg g-1 (30 min) at 0.2 V vs SHE and a desorption efficiency of 98.4% (5 min) at 0.8 V vs SHE. Electrochemical analysis revealed that the reversible redox transformation of S-S/-S- groups in SPAN was responsible for selective adsorption and rapid desorption in response to the electrode potential. This study provides a proof-of-concept demonstration of an electrochemically switchable polymer to build up a reversible RAD system for controllable recovery of heavy metals in wastewater, making value-added resource recovery more efficient, more intelligent, and more sustainable.

Red-Shifted Luminescence of Acrylonitrile-Containing Copolymers: A Matter of One Methyl Unit.

Copolymerization provides an effective approach to tune the photophysical properties of non-conventional luminescent polymers (NCLPs). In this study, the controlling of intrinsic emissions of polyacrylonitrile (PAN) copolymers is revealed by a delicate difference of secondary monomers. The introduction of methacrylate comonomers can induce a 70-nm red-shifting in the PL emission of copolymers compared with that of acrylate-containing copolymers. The mechanism of such "copolymerization induced red-shifting" in PAN copolymers is investigated. It is demonstrated that the presence of the α-methyl group in the copolymers can enhance the chain rigidity and through-space conjugation (TSC) of C≡N groups, resulting in the red-shifting of emission.

Nanofibrous PAN-PDMS Films-Based High-Performance Triboelectric Artificial Whisker for Self-Powered Obstacle Detection.

Avoiding collisions is a key necessity for any autonomous mobile robot, and obstacle mapping enables them to maneuver in an uncharted area. In this era of the Internet of Things, with the emerging need for a multitude of sensors, adopting self-powered technologies is more practically viable than batteries for powering the same. Herein, with the fabrication of a triboelectric artificial whisker (TAW), a self-powered obstacle detection is demonstrated via tactile perception. The mechanical contact with the obstacle gives rise to an electrical signal from the TAW owing to the embedded triboelectric sensor. In addition, the triboelectric nanogenerator (TENG) based on electrospun polyacrylonitrile (PAN) nanofibers and polydimethylsiloxane film, which facilitates this self-powered artificial sensation, generates an output voltage of 720 V and current density of 5 mA m-2 with 1.7 W m-2 of maximum power delivery from a force of 10 N. The electro-spinning aided enhancement in contact area of the PAN is responsible for the remarkable improvement in the performance of the TENG, 3.4 times enhancement in power density, when compared to the nonsurface-modified ones. In addition, the TENG is able to charge commercial capacitors up to appreciable values and demonstrates powering different electronic gadgets such as calculators and thermometers.

Contribution of Adsorption and Hematocrit Levels to Ganciclovir Clearance in an in Vitro Continuous Hemodiafiltration Model.

Estimation of the continuous hemodiafiltration (CHDF) clearance (CLCHDF) of ganciclovir (GCV) is crucial for achieving efficient treatment outcomes. Here, we aimed to clarify the contribution of diafiltration, adsorption, and hematocrit level to the CLCHDF of GCV in an in vitro CHDF model using three membranes: polyacrylonitrile and sodium methallyl sulfonate copolymer coated with polyethylenimine (AN69ST); polymethylmethacrylate (PMMA); and polysulfone (PS). In vitro CHDF was performed with effluent flow rates (Qe) of 800, 1500, and 3000 mL/h. The initial GCV concentration was 10 µg/mL while that of human serum albumin (HSA) was 0 or 5 g/dL. The CLCHDF, diafiltration rates, and adsorption rates were calculated. The whole blood-to-plasma ratio (R) of GCV for a hematocrit of 0.1 to 0.5 was determined using blood samples with 0.5 to 100 µg/mL of GCV. The in vitro CHDF experiment using AN69ST, PMMA, and PS membranes showed that the total CLCHDF values were almost the same as the Qe and not influenced by the HSA concentration. The diafiltration rate exceeded 88.1 ± 2.8% while the adsorption rate was lower than 9.4 ± 9.4% in all conditions. The R value was 1.89 ± 0.11 and was similar at all hematocrit levels and GCV concentrations. In conclusion, diafiltration mainly contributes to the CLCHDF of GCV, rather than adsorption. Hematocrit levels might not affect the relationship between the plasma and blood CLCHDF of GCV, and the CLCHDF of GCV can be estimated from the Qe and R, at least in vitro.

Dyeing of polyacrylonitrile knitted fabric using liposomes.

In this study, it was aimed to analyze the effects of liposomes on the dyeing of polyacrylonitrile fabrics. For this purpose, firstly liposome synthesis was carried out, and then liposome production was confirmed by Fourier transform infrared spectroscopy analysis. Additionally, zeta potential measurements were carried out to see whether stable structures were formed. Then, a selected basic dye was encapsulated with a liposome and the possibilities of using these capsules as alternative to retarders in the dyeing of polyacrylonitrile fabrics were examined. According to results obtained, it can be said that the 1% solution of synthesized liposomes creates a more stable suspension with a polydispersity index of 0.472 and the average particle size of 165.2 nm. On the other hand, it has been revealed that if 1% liposome is used in dyeing, a kind of retarder effect can be achieved in the dyeing of polyacrylonitrile fabrics. Moreover, it can be said that the decrease in color efficiency, that is, the loss of yield, caused by the use of liposome at the end of dyeing is lower compared to the retarder. This is also a very important issue, because a good retarder is expected to slow down the dye uptake, but not reduce the dye intake too much at the end of the dyeing. Dyeing levelness (%) was found to be 96.1, 97.4, and 97.1 for dyeings without auxiliary, with 1% cationic retarder and with 1% liposome, respectively. Beyond this, no significant difference was observed in terms of fastness of dyeing.

Highly reusable Bi2O3/electron-Cu-shuttle in-situ immobilized polyacrylonitrile fibrous mat for efficient photocatalytic degradation of methylene blue and rhodamine B dyes.

Organic semiconductor-based photocatalysts have been alluring due to their edge over inorganic photocatalysts. In this study, a reusable copper-bismuth oxide/polyacrylonitrile (Cu-Bi2O3/PAN) fibrous mat was prepared by fast-process flame spray pyrolysis and electrospinning for photocatalytic degradation of methylene blue (MB) and rhodamine B (RhB) dyes. The results confirmed a well-defined morphology of Cu-Bi2O3/PAN fibers and good coordination of flame-made Cu-Bi2O3 particles with the functional groups of PAN. The Cu-Bi2O3/PAN fibrous mat exhibits remarkable photocatalytic performance of 96.2% MB and 98.6% RhB degradation, with a reaction rate as high as about 4.5- and 10.2-times than that of flame-made Cu-Bi2O3 particles and PAN under neutral condition, even after 10 cycles. The Cu-Bi2O3/PAN exhibits complete degradation of MB and RhB in 90 and 150 min under alkaline and slightly acidic conditions, respectively. The synergistic effect of Cu-Bi2O3 and coordination bond between particles and functional groups of PAN promoted carrier migration, suppressed recombination of carriers and provided abundant radicals on the surface of the mat. Superoxide and hydroxyl radicals were the major active species involved in the degradation of RhB and MB, respectively. This work provides an insight into designing the Cu-metal-shuttle based photocatalysts to optimize fibrous mat application in water remediation.

In-Situ Cyclized Polyacrylonitrile as an Electron Selective Layer for n-i-p Perovskite Solar Cell with Enhanced Efficiency and Stability.

In situ cyclized polyacrylonitrile (CPAN) is developed to replace n-type metal oxide semiconductors (TiO2 or SnO2) as an electron selective layer (ESL) for highly efficient and stable n-i-p perovskite solar cells (PSCs). The CPAN layer is fabricated via facile in situ cyclization reaction of polyacrylonitrile (PAN) coated on a conducting glass substrate. The CPAN layer is robust and insoluble in common solvents, and possesses n-type semiconductor properties with a high electron mobility of 4.13×10-3 cm2 V-1 s-1. With the CPAN as an ESL, the PSC affords a power conversion efficiency (PCE) of 23.12 %, which is the highest for the n-i-p PSCs with organic ESLs. Moreover, the device with the CPAN layer holds superior operational stability, maintaining over 90 % of their initial efficiency after 500 h continuous light soaking. These results confirm that the CPAN layer would be a desirable low-cost and efficient ESL for n-i-p PSCs and other photoelectronic devices with high performance and stability.

Interfacial Engineering of Zn Metal via a Localized Conjugated Layer for Highly Reversible Aqueous Zinc Ion Battery.

Aqueous zinc-ion batteries are regarded as promising and efficient energy storage systems owing to remarkable safety and satisfactory capacity. Nevertheless, the instability of zinc metal anodes, characterized by issues such as dendrite growth and parasitic side reactions, poses a significant barrier to widespread applications. Herein, we address this challenge by designing a localized conjugated structure comprising a cyclic polyacrylonitrile polymer (CPANZ), induced by a Zn2+-based Lewis acid (zinc trifluoromethylsulfonate) at a temperature of 120 °C. The CPANZ layer on the Zn anode, enriched with appropriate pyridine nitrogen-rich groups (conjugated cyclic -C=N-), exhibits a notable affinity for Zn2+ with ample deposition sites. This zincophilic skeleton not only serves as a protective layer to guide the deposition of Zn2+ but also functions as proton channel blocker, regulating the proton flux to mitigate the hydrogen evolution. Additionally, the strong adhesion strength of the CPANZ layer guarantees its sustained protection to the Zn metal during long-term cycling. As a result, the modified zinc electrode demonstrates long cycle life and high durability in both half-cell and pouch cells. These findings present a feasible approach to designing high performance aqueous anodes by introducing a localized conjugated layer.

Electric field simulation of multi-needle water bath electrospinning and the structural properties of SCN/PAN micro/nanofiber composite yarns.

Multi-needle water bath electrospinning is one of the most efficient methods used to prepare micro/nanofiber composite yarns. The nanofiber structure can be targeted and regulated to obtain high-performance composite yarns. To explore the effect of the receiving distance on the structure and properties of micro/nanofiber composite yarns, polyacrylonitrile nanofibers were uniformly coated on silver-coated nylon yarn via a four-needle continuous water bath electrospinning method. The electric field distribution at different receiving distances was simulated by ANSYS finite element analysis software, and the effects of electric field distribution on the structure and properties of the micro/nanofiber composite yarns were studied. The results indicated that the peak electric field intensity appeared at the tip of the needles and decreased with the increase in the receiving distance. The receiving distance was constant, and the field intensity was lower when the direction of the centerline of the needle tip was farther away from the tip; however, the field intensity at the conductive core yarn was higher than that in the surrounding area (small spikes). The average field intensity of the small spikes at 180 mm was only 1/4 of that at 80 mm. When the receiving distance increased within a certain range (100∼140 mm), the nanofibers had a smooth surface and good separation, their diameters decreased continuously and the porosity changed inversely. With a further increase in the receiving distance, the nanofibers gradually bonded, their diameter increased and the porosity showed the opposite trend. The coating rate of the nanofibers showed a decreasing trend, and the mechanical properties of the micro/nano composite yarns were improved. When the receiving distance was 100 mm, the porosity reached 38.94%, and the breaking force, breaking elongation and breaking strength were 13.71 ± 1.36 cN, 22.76 ± 6.62% and 0.15 ± 0.02 cN·dtex-1, respectively. Upon consideration of all the above factors, the receiving distance of 100 mm is appropriate.

Quantitative determination of pesticides in human plasma using bio-SPME-LC-MS/MS: a robust tool to assess occupational exposure to pesticides.

Analysis of biofluids, such as plasma, can be used to investigate occupational pesticide exposure in the agricultural industry. Considering the chemical complexity and variability of plasma samples, any protocol for pesticide analysis should achieve efficient sample cleanup to minimize matrix effects and enhance method sensitivity through analyte pre-concentration. In this work, a high-throughput method was developed for analysis of 79 pesticides, commonly used in agricultural practices, in human plasma, using biocompatible solid-phase microextraction (SPME) coupled to liquid chromatography-tandem mass spectrometry. An SPME method was developed using a biocompatible hydrophilic-lipophilic balance/polyacrylonitrile (HLB/PAN) extraction phase and demonstrated negligible matrix effects. The performance of the developed SPME method was compared to a QuEChERS -Quick, Easy, Cheap, Effective, Rugged, and Safe- method, the most common sample preparation and cleanup approach for pesticide analysis in complex matrices. Comparable accuracy and precision were achieved for both methods, with accuracy values within 70-120% and relative standard deviation < 15%. Overall, the developed SPME and QuEChERS methods extracted 79 out of 82 monitored pesticides in human plasma. The SPME protocol demonstrated higher sensitivity than the QuEChERS method and a drastic reduction of matrix effects.

Ionic COF Composite Membranes for Selective Perfluoroalkyl Substances Separation.

High-performance membranes are critical to membrane separation technology. In recent years, 2D covalent organic frameworks (2D COFs) have attracted extensive attention in the field of membrane separation due to their high porosity, ordered channels, and fine-tuned pore sizes, which are considered as excellent candidate to solve the trade-off between membrane selectivity and permeability. Herein, two kinds of ionic 2D COFs with different charge properties (termed as iCOFs) are integrated into polyacrylonitrile (PAN) substrates to form two composite membranes (PAN@iCOFs) with excellent selective perfluoroalkyl substances (PFASs) separation performance with high solvent permeability and good mechanical properties. The as-prepared PAN@iCOFs composite membranes can selectively reject more than 99.0% of positively and negatively charged PFASs in wastewater while maintaining good stability and recyclability.

Heterogeneous Fenton's-like catalyst potentiation of hydrogen peroxide disinfection: an investigation into mechanisms of action.

AIMS: This study aimed to establish the mechanisms of action (MOA) of a novel surface-functionalized polyacrylonitrile (PAN) catalyst, which was previously shown to have potent antimicrobial activity in conjunction with hydrogen peroxide (H2O2). METHODS AND RESULTS: Bactericidal activity was determined using a disinfectant suspension test. The MOA was investigated by measuring the loss of 260 nm absorbing material, membrane potential, permeability assays, analysis of intra- and extracellular ATP and pH, and tolerance to sodium chloride and bile salts.The catalyst lowered sub-lethal concentrations of H2O2 from 0.2 to 0.09%. H2O2 ± 3 g PAN catalyst significantly (P ≤ 0.05) reduced sodium chloride and bile salt tolerance, suggesting the occurance of sublethal cell membrane damage. The catalyst significantly increased (P ≤ 0.05) N-Phenyl-l-Napthylamine uptake (1.51-fold) and leakage of nucleic acids, demonstrating increased membrane permeability. A significant (P ≤ 0.05) loss of membrane potential (0.015 a.u.), coupled with pertubation of intracellular pH homeostasis and depletion of intracellular ATP, suggests potentiation of H2O2-mediated cell membrane damage. CONCLUSIONS: This is the first study to investigate the catalyst's antimicrobial mechanism of action, with the cytoplasmic membrane being a target for cellular injury.

Electrospun PVB/AVE NMs as mask filter layer for win-win effects of filtration and antibacterial activity.

The COVID-19 pandemic has caused serious social and public health problems. In the field of personal protection, the facial masks can prevent infectious respiratory diseases, safeguard human health, and promote public safety. Herein, we focused on preparing a core filter layer for masks using electrospun polyvinyl butyral/apocynum venetum extract nanofibrous membranes (PVB/AVE NMs), with durable interception efficiency and antibacterial properties. In the spinning solution, AVE acted as a salt to improve electrical conductivity, and achieve long-lasting interception efficiency with adjustable pore size. It also played the role of an antibacterial agent in PVB/AVE NMs to achieve win-win effects. The hydrophobicity of PVB-AVE-6% was 120.9° whereas its filterability reached 98.3% when the pressure drop resistance was 142 Pa. PVB-AVE-6% exhibited intriguing properties with great antibacterial rates of 99.38% and 98.96% against S. aureus and E. coli, respectively. After a prolonged usability test of 8 h, the filtration efficiency of the PVB/AVE masks remained stable at over 97.7%. Furthermore, the antibacterial rates of the PVB/AVE masks on S. aureus and E. coli were 96.87% and 96.20% respectively, after using for 2 d. These results indicate that PVB/AVE NMs improve the protective performance of ordinary disposable masks, which has certain application in air filtration.

In vitro analysis of factors affecting the continuous hemodiafiltration clearance of teicoplanin.

BACKGROUND: In the treatment of sepsis, continuous hemodiafiltration (CHDF) and the administration of antibiotics such as teicoplanin (TEIC) are frequently performed in parallel. We aimed to clarify the factors influencing the CHDF clearance (CLCHDF ) of TEIC using a polymethylmethacrylate (PMMA) membrane or a polyacrylonitrile and sodium methallyl sulfonate copolymer membrane coated with polyethylenimine (AN69ST). We also investigated whether the adsorption of TEIC onto the hemofilters inhibits the adsorption of interleukin (IL)-6 onto the membranes. METHODS: TEIC, human serum albumin (HSA), and IL-6 were incubated with pieces of hemofilter membranes and adsorption rates were calculated. The CLCHDF , diafiltration rate, and adsorption rate of TEIC were calculated using an in vitro CHDF circuit model. RESULTS: The adsorption rates of TEIC onto the pieces of PMMA and AN69ST membranes ranged from 15.0% to 100% and from -10% to 5%, respectively. The adsorption rate of IL-6 was similar with or without TEIC. The CLCHDF and adsorption rate of TEIC under PMMA-CHDF depended on HSA, but not on effluent flow rate (Qe). The CLCHDF under AN69ST-CHDF depended on HSA and Qe. The observed CLCHDF under AN69ST-CHDF was similar to the predicted value (the product of Qe and the plasma unbound fraction). The observed CLCHDF under PMMA-CHDF was 2.0-7.8 times greater than the predicted value. CONCLUSIONS: Adsorption mainly contributes to the CLCHDF of TEIC using PMMA membranes, whereas diafiltration mainly contributes to the CLCHDF of TEIC using AN69ST membranes. TEIC adsorption might not affect the adsorption of IL-6 onto PMMA membrane.

Heterometallic uranyl (hydroxyethyl)iminodiacetic acid (heidi) complexes: Molecular models for U(VI) uptake in complex media.

Amidoximated absorbents (AO-PAN) effectively remove U(VI) from aqueous solution, but previous studies reported more variability for complex natural waters that contain additional confounding ions and molecules. Ternary phases containing U(VI), M(III) (M = Fe(III), Al(III), Ga(III)), and organic molecules exist under these conditions and cause heterogeneous U(VI) uptake on AO-PAN. The goal of the current study is to provide additional insights into the structural features ternary complexes using N-(2-hydroxyethyl)-iminodiacetic acid (HEIDI) as the model organic chelator and explore the relevance of these species on U(VI) capture. Three model compounds ([(UO2)(Fe)2(µ3-O)(C6NO5H8)2(H2O)4] (UFe2), ([(UO2)(Al)2(µ2-OH)(C6NO5H8)2(H2O)3] (UAl2) and [(UO2)(Ga)2(µ2-OH)(C6NO5H8)2(H2O)3] (UGa2)) were characterized by single-crystal X-ray diffraction. Raman spectra of the model compounds were compared with solution data and the ternary phases were noted in the case of Al(III) and Ga(III), but not in the Fe(III) system. U(VI) adsorption onto AO-PAN was not impacted by the presence of HEIDI or the trivalent metal species.

Thermochemical Cyclization Constructs Bridged Dual-Coating of Ni-Rich Layered Oxide Cathodes for High-Energy Li-Ion Batteries.

Enhancing microstructural and electrochemical stabilities of Ni-rich layered oxides is critical for improving the safety and cycle-life of high-energy Li-ion batteries. Here we propose a thermochemical cyclization strategy where heating polyacrylonitrile with LiNi0.8Co0.1Mn0.1O2 can simultaneously construct a cyclized polyacrylonitrile outer layer and a rock-salt bridge-like inner layer, forming a compact dual-coating of LiNi0.8Co0.1Mn0.1O2. Systematic studies demonstrate that the mild cyclization reaction between polyacrylonitrile and LiNi0.8Co0.1Mn0.1O2 induces a desirable "layered to rock-salt" structural transformation to create a nano-intermedium that acts as the bridge for binding cyclized polyacrylonitrile to layered LiNi0.8Co0.1Mn0.1O2. Because of the improvement of the structural and electrochemical stability and electrical properties, this cathode design remarkably enhances the cycling performance and rate capability of LiNi0.8Co0.1Mn0.1O2, showing a high reversible capacity of 183 mAh g-1 and a high capacity retention of 83% after 300 cycles at 1 C rate. Notably, this facile and scalable surface engineering makes Ni-rich cathodes potentially viable for commercialization in high-energy Li-ion batteries.

Synthesis and Characterization of Aminoamidine-Based Polyacrylonitrile Fibers for Lipase Immobilization with Effective Reusability and Storage Stability.

Lipases are extensively utilized industrial biocatalysts that play an important role in various industrial and biotechnological applications. Herein, polyacrylonitrile (PAN) was treated with hexamethylene diamine (HMDA) and activated by glutaraldehyde, then utilized as a carrier support for Candida rugosa lipase. In this regard, the morphological structure of modified PAN before and after the immobilization process was evaluated using FTIR and SEM analyses. The immobilized lipase exhibited the highest activity at pH 8.0, with an immobilization yield of 81% and an activity of 91%. The optimal pH and temperature for free lipase were 7.5 and 40 °C, while the immobilized lipase exhibited its optimal activity at a pH of 8.0 and a temperature of 50 °C. After recycling 10 times, the immobilized lipase maintained 76% of its activity and, after 15 reuses, it preserved 61% of its activity. The lipase stability was significantly improved after immobilization, as it maintained 76% of its initial activity after 60 days of storage. The calculated Km values were 4.07 and 6.16 mM for free and immobilized lipase, and the Vmax values were 74 and 77 µmol/mL/min, respectively. These results demonstrated that synthetically modified PAN is appropriate for immobilizing enzymes and has the potential for commercial applications.