Ferrocene-Containing Porous Poly(Ionic Liquid) Membranes: Synthesis and Application as Sacrificial Template for Porous Iron Oxide Films.

Herein, the fabrication of iron-containing porous polyelectrolyte membranes (PPMs) via ionic complexation between an imidazolium-based poly(ionic liquid) (PIL) and 1,1-ferrocenedicarboxylic acid is reported. The key parameters to control the microstructure of porous hybrid membranes are investigated in detail. Further aerobic pyrolysis of such porous hybrid membranes at 900 °C can transfer the ferrocene-containing PPMs into freestanding porous iron oxide films. This process points out a sacrificial template function of porous poly(ionic liquid) membranes in the fabrication of porous metal oxide films.

Anti-Swelling Gradient Polyelectrolyte Hydrogel Membranes as High-Performance Osmotic Energy Generators.

Emerging asymmetric ionic membranes consisting of two different porous membranes show great superiority in harvesting clean and renewable osmotic energy. The main barriers constraining their applications are incompatible interfaces and a low interfacial ionic transport efficiency, which are detrimental to the long-term stability and improvement of the power density. Here, continuous-gradient all-polysaccharide polyelectrolyte hydrogel membranes prepared by ultrafast reaction/diffusion have been demonstrated to enable high-performance osmotic energy conversion. Besides an inherent high ion conductivity and excellent ion selectivity, the anti-swelling polyelectrolyte gradient membranes preserve the ionic diode effect of the asymmetric membranes to facilitate one-way ion diffusion but circumvent adverse interfacial effects. In consequence, they can present ultrahigh power densities of 7.87 W m-2 by mixing seawater and river water, far superior to state-of-the-art membranes.

Electrochemical Pixels: Semi-open electrochemical cells with a vertically stacked design.

A novel electrochemical cell design in a vertically stacked configuration is presented. Through a layered structure using a top macroporous working electrode, a polyelectrolyte, and a bottom metallic conductor a standalone electrochemical cell with an internal reference electrode is built. This sensor allows monitoring an electrochemical property of an external solution with only one electrode in direct contact with the sample. Using paper-based platinum electrode for the porous top electrode and Nafion as polyelectrolyte material, the self-powered detection of hydrogen peroxide is performed. The system can be operated in multiple modes. In a capacitive way, the open circuit potential is measured. Alternatively, in a self-powered current mode, the system emulates a fuel cell. Additionally, a potential-current switched mode is also demonstrated. Because of this unique design and operational features this sensor is considered as an electrochemical pixel. To further demonstrate the advantages of this device, the detection of glucose is performed by building an array of sensors using a single back (reference) electrode and multiple working electrodes. These results lay the groundwork for the development of a new generation of simple and low cost biochemical sensors and electrochemical sensing arrays.

Polyelectrolyte Membrane Nanocoatings Aimed at Personal Protective and Medical Equipment Surfaces to Reduce Coronavirus Spreading.

The study of the surface of membrane coatings constructed with adsorbed coronavirus (COV) was described to test their suitability for the antiviral activity for application in personal protective and medical equipment. The nanocoating based on polyethyleneimine (PEI) or polystyrene sulfonate (PSS) with metallic nanoparticles incorporated was investigated using the AFM technique. Moreover, the functioning of human lung cells in a configuration with the prepared material with the adsorbed coronavirus was studied using microscopic techniques and flow cytometry. The mean values of the percentage share of viable cells compared with the control differed by a maximum of 22%. The results showed that PEI and PSS membrane layer coatings, modified with chosen metallic nanoparticles (AuNPs, AgNPs, CuNPs, FeNPs) that absorb COV, could support lung cells' function, despite the different distribution patterns of COV on designed surfaces as well as immobilized lung cells. Therefore, the developed membrane nanocoatings can be recommended as material for biomedical applications, e.g., medical equipment surfaces to reduce coronavirus spreading, as they adsorb COV and simultaneously maintain the functioning of the eukaryotic cells.

Self-Powered Multifunction Ionic Skins Based on Gradient Polyelectrolyte Hydrogels.

Human skin is the largest organ, and it can transform multiple external stimuli into the biopotential signals by virtue of ions as information carriers. Ionic skins (i-skins) that can mimic human skin have been extensively explored; however, the limited sensing capacities as well as the need of an extra power supply significantly restrict their broad applications. Herein, we develop self-powered humanlike i-skins based on gradient polyelectrolyte membranes (GPMs) that can directly and accurately perceive multiple stimuli. Prepared by a hydrogel-assisted reaction-diffusion method, the GPMs exhibit gradient-distributed charged groups across polymer networks, enabling one to generate a thickness-dependent and thermoresponsive self-induced potential in a hydrated situation and in a humidity-sensitive self-induced potential in a dehydrated/dried situation, respectively. Consequently, the GPM-based i-skins can precisely detect pressure, temperature, and humidity in a self-powered manner. The coupling of mechano-electric and thermo-electric effects inherent in GPMs provides a general strategy for developing innovative self-powered ion-based perception systems.

Effects of metal-polymer complexation on structure and transport properties of metal-substituted polyelectrolyte membranes.

Morphological and transport properties of hydrated metal-substituted Nafion membranes doped with metal ions of different valency and coordination strength are explored using coarse-grained dissipative particle dynamics simulations. To incorporate the effects of metal-polymer complexation, we introduce a novel metal ion complexation model, in which the charged central metal ion is surrounded by dummy sites that coordinate with ligands. The model parameters are determined by matching the metal-ligand running coordination numbers and the diffusion coefficients obtained from atomistic simulations and/or experiments. The increase of valency and coordination strength is found to strongly influence both the morphology and transport characteristics of the membrane at all hydration levels. The membrane segregation into hydrophobic and hydrophilic sub-phases is affected by metal-sulphonate coordination induced crosslinking at the hydrophilic/hydrophobic interface. The simulation results indicate that the interfacial crosslinking influences the interfacial tension and thereby affect the growth and coalescence of water clusters upon the increase of hydration. Multivalent complexation hinders water and ion mobility and causes anomalous sub-diffusion and dramatic decrease of the water permeability and ionic conductivity. Our DPD model is found efficient in elucidating the mechanisms of coordination-induced cross-linking and complexation and predicting on a semi-quantitative level the morphological and transport properties of metal-substituted Nafion membranes depending on the ion valency and coordination strength. The proposed model can be further advanced and adopted for other polyelectrolyte systems, such as sulfonated block-copolymers, polysaccharide solutions and composites, and biopolymer assemblies.

Controlling Interfacial Ion-Transport Kinetics Using Polyelectrolyte Membranes for Additive- and Effluent-free, High-Performance Electrodeposition.

The development of high-performance, environmentally friendly electrodeposition processes is critical for emerging coating technologies because current technologies use highly complex baths containing metal salts, supporting electrolytes, and various kinds of organic additives, which are problematic from both environmental and cost perspectives. Here, we show that a 200 µm-thin polyelectrolyte membrane sandwiched between electrodes effectively concentrates metal ions through interfacial penetration, which increases the conductance between the electrodes to 0.30 S and realizes solid-state electrodeposition that produces no mist, sludge, or even waste effluent. Both, experimental results and theoretical calculations, reveal that electrodeposition is controlled by ion penetration at the solution/polyelectrolyte interface, providing an intrinsically different ion-transport mechanism to that of conventional diffusion-controlled electrodeposition. The setup, which includes 0.50 mol L-1 copper sulfate and no additives, delivers a maximum current density of 300 mA cm-2, which is nearly fivefold higher than that of a current commercial plating bath containing organic additives.

Highly Proton Conducting Polyelectrolyte Membranes with Unusual Water Swelling Behavior Based on Triptycene-containing Poly(arylene ether sulfone) Multiblock Copolymers.

Multiblock poly(arylene ether sulfone) copolymers are attractive for polyelectrolyte membrane fuel cell applications due to their reportedly improved proton conductivity under partially hydrated conditions and better mechanical/thermal stability compared to Nafion. However, the long hydrophilic sequences required to achieve high conductivity usually lead to excessive water uptake and swelling, which degrade membrane dimensional stability. Herein, we report a fundamentally new approach to address this grand challenge by introducing shape-persistent triptycene units into the hydrophobic sequences of multiblock copolymers, which induce strong supramolecular chain-threading and interlocking interactions that effectively suppress water swelling. Consequently, unlike previously reported multiblock copolymer systems, the water swelling of the triptycene-containing multiblock copolymers did not increase proportionally with water uptake. This combination of high water uptake and low swelling behavior of these copolymers resulted in excellent proton conductivity and membrane dimensional stability under fully hydrated conditions. In particular, the triptycene-containing multiblock copolymer film with the longest hydrophilic block length (i.e., BPSH100-TRP0-15k-15k) had a water uptake of 105%, an excellent proton conductivity of 0.150 S/cm, and a volume swelling ratio of just 29% (more than 42% reduction compared to Nafion 212).

Recent Advances in the Fabrication of Membranes Containing "Ion Pairs" for Nanofiltration Processes.

In the face of serious environmental pollution and water scarcity problems, the membrane separation technique, especially high efficiency, low energy consumption, and environmental friendly nanofiltration, has been quickly developed. Separation membranes with high permeability, good selectivity, and strong antifouling properties are critical for water treatment and green chemical processing. In recent years, researchers have paid more and more attention to the development of high performance nanofiltration membranes containing "ion pairs". In this review, the effects of "ion pairs" characteristics, such as the super-hydrophilicity, controllable charge character, and antifouling property, on nanofiltration performances are discussed. A systematic survey was carried out on the various approaches and multiple regulation factors in the fabrication of polyelectrolyte complex membranes, zwitterionic membranes, and charged mosaic membranes, respectively. The mass transport behavior and antifouling mechanism of the membranes with "ion pairs" are also discussed. Finally, we present a brief perspective on the future development of advanced nanofiltration membranes with "ion pairs".

Fabrication of hybrid graphene oxide/polyelectrolyte capsules by means of layer-by-layer assembly on erythrocyte cell templates.

A novel and facile method was developed to produce hybrid graphene oxide (GO)-polyelectrolyte (PE) capsules using erythrocyte cells as templates. The capsules are easily produced through the layer-by-layer technique using alternating polyelectrolyte layers and GO sheets. The amount of GO and therefore its coverage in the resulting capsules can be tuned by adjusting the concentration of the GO dispersion during the assembly. The capsules retain the approximate shape and size of the erythrocyte template after the latter is totally removed by oxidation with NaOCl in water. The PE/GO capsules maintain their integrity and can be placed or located on other surfaces such as in a device. When the capsules are dried in air, they collapse to form a film that is approximately twice the thickness of the capsule membrane. AFM images in the present study suggest a film thickness of approx. 30 nm for the capsules in the collapsed state implying a thickness of approx. 15 nm for the layers in the collapsed capsule membrane. The polyelectrolytes used in the present study were polyallylamine hydrochloride (PAH) and polystyrenesulfonate sodium salt (PSS). Capsules where characterized by transmission electron microscopy (TEM), atomic force microscopy (AFM), dynamic light scattering (DLS) and Raman microscopy, the constituent layers by zeta potential and GO by TEM, XRD, and Raman and FTIR spectroscopies.