Cellulose Modified with Polyethylenimine (PEI) Using Microwave Methodology for Adsorption of Chromium from Aqueous Solutions.

A large amount of agricultural waste was used to prepare cellulose (Cel) and then the surface was modified with PEI (Cel-PEI) using the microwave method. To be used as a metal adsorbent, the adsorption of Cr (VI) from an aqueous solution by Cel-PEI was measured using Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD), and thermogravimetric analysis (TGA) techniques. The parameters of Cr (VI) adsorption in solution by the Cel-PEI adsorbent were as follows: the pH of the solution was 3, the concentration of the chromium solution was 100 mg/L, and the adsorption time was 180 min at 30 °C using 0.01 g of adsorbent. Cel-PEI had a Cr (VI) adsorption capacity of 106.60 mg/g, while the unadjusted Cel was 23.40 mg/g and the material recovery showed a decrease in efficiency of 22.19% and 54.27% in the second and third cycles, respectively. The absorption isotherm of chromium adsorption was also observed. The Cel-PEI material conformed to the Langmuir model with an R2 value of 0.9997. The kinetics of chromium adsorption showed that under pseudo-second-order analysis, with R2 values of 0.9909 and 0.9958 for Cel and Cel-PEI materials, respectively. The G° and H° values of the adsorption process were negative, indicating that the adsorption is spontaneous and that the adsorption process is exothermic. The efficient preparation adsorbent materials for Cr (VI) was achieved using a short microwave method that is low-cost and environmentally friendly for use in the treatment of Cr-contaminated wastewater.

Advancements in mammalian cell transient gene expression (TGE) technology for accelerated production of biologics.

Transient gene expression (TGE) in animal cell cultures has been used for almost 30 years to produce milligrams and grams of recombinant proteins, virus-like particles and viral vectors, mainly for research purposes. The need to increase the amount of product has led to a scale-up of TGE protocols. Moreover, product quality and process reproducibility are also of major importance, especially when TGE is employed for the preparation of clinical lots. This work gives an overview of the different technologies that are available for TGE and how they can be combined, depending on each application. Then, a critical assessment of the challenges of large-scale transient transfection follows, focusing on suspension cell cultures transfected with polyethylenimine (PEI), which is the most widely used methodology for transfection. Finally, emerging opportunities for transient transfection arising from gene therapy, personalized medicine and vaccine development are reviewed.

Adsorptive removal of harmful algal species Microcystis aeruginosa directly from aqueous solution using polyethylenimine coated polysulfone-biomass composite fiber.

In recent times, the treatment of harmful algal blooms (HABs) became an important environmental issue to preserve and remediate water resources globally. In the present study, the adsorptive removal of harmful algal species Microcystis aeruginosa directly from an aqueous medium was attempted. Waste biomass (Escherichia coli) was immobilized using polysulfone and coated using the cationic polymer polyethylenimine (PEI) to generate PEI-coated polysulfone-biomass composite fiber (PEI-PSBF). The density of M. aeruginosa in an aqueous medium (BG11) was significantly decreased by treatment with PEI-PSBF. additionally, analysis using FE-SEM, confirmed that the removal of M. aeruginosa algal cells by PEI-PSBF was caused by the adsorption mechanism. According to the profiles of phosphorus for the algal cell growth in M. aeruginosa cultivating samples, we found that the adsorbed M. aeruginosa onto the PEI-PSBF lost their biological activity compared to the non-treated M. aeruginosa cells.

Design of pH-sensitive peptides from natural antimicrobial peptides for enhancing polyethylenimine-mediated gene transfection.

BACKGROUND: Poor endosomal release is a major barrier of polyplex-mediated gene transfection. Antimicrobial peptides (AMPs) are commonly used to improve polyethylenimine (PEI)-mediated gene transfection by increasing endosomal release. In the present study, we designed novel pH-sensitive peptides that highly enhance transfection efficiency compared to their parent peptides. METHODS: Two analogues of melittin (Mel) and RV-23 (RV) were synthesized by replacing the positively-charged residues in their sequences with glutamic acid residues. The pH-sensitive lysis ability of the peptides, the effect of the peptides on physicochemical characteristics, the intracellular trafficking, the transfection efficiency, and the cytotoxicity of the polyplexes were determined. RESULTS: The acidic peptides showed pH-sensitive lytic activity. The hemolytic activity of acidic peptides at pH 5.0 was higher than that at pH 7.4. The incorporation of acidic peptides did not affect the DNA binding ability of PEI but affected the physicochemical characteristics of the PEI/DNA polyplexes, which may be beneficial for endosomal release and gene transfection. The incorporation of acidic peptides into PEI/DNA polyplexes enhanced the PEI-mediated transfection efficiency corresponding to up to 42-fold higher luciferase activity compared to that of PEI alone. CONCLUSIONS: The results of the present study indicate that replacement of positively-charged residues with glutamic acid residues in the AMP sequence yields pH-sensitive peptides, which enhance the transfection efficiency of PEI/DNA polyplexes in various cell lines.

A functionally integrated thermoplastic microdevice for one-step solid-phase-based nucleic acid purification and isothermal amplification for facile detection of foodborne pathogen.

In this study, we fabricate a functionally integrated monolithic thermoplastic microdevice for continuous operation of nucleic acid purification and amplification using polycarbonate (PC). A solid-phase-based purification and subsequent isothermal amplification, specifically, thermal helicase-dependent amplification (tHDA), was performed in a single operation in a valve-free manner. PC microdevice was assembled using modified thermal bonding process under relatively low temperature and pressure condition, realized by surface chemical modification of PC into hydrophilic property using amine-bearing polyethyleneimine (PEI). After the device sealing, only the microchannel parts were selectively modified to be hydrophobic, using epoxy-terminated poly(dimethylsiloxane) (PDMS) (epoxy-PDMS) on amine-coated surface for stepwise introduction of multiple reagents in a valve-free manner. Using the integrated PC microdevice, nucleic acids from genetically modified Escherichia coli (E. coli) O157:H7 were captured inside a chamber bearing amine functionality, by electrostatic interaction, and were subsequently amplified isothermally in the same chamber. Purified DNA captured inside the microchamber was detected directly inside the chamber by fluorescence measurement, and a 92-bp long EaeA gene, inserted into the E. coli O157:H7, was successfully amplified using the integrated PC microdevice in less than 90 min, paving the way for facile identification of foodborne pathogens with simple operation and reduced peripheral operations applicable for portable healthcare purposes. Biotechnol. Bioeng. 2016;113: 2614-2623. © 2016 Wiley Periodicals, Inc.

Post-Transcriptional Regulation of the GASC1 Oncogene with Active Tumor-Targeted siRNA-Nanoparticles.

Basal-like breast cancer (BLBC) accounts for the most aggressive types of breast cancer, marked by high rates of relapse and poor prognoses and with no effective clinical therapy yet. Therefore, investigation of new targets and treatment strategies is more than necessary. Here, we identified a receptor that can be targeted in BLBC for efficient and specific siRNA mediated gene knockdown of therapeutically relevant genes such as the histone demethylase GASC1, which is involved in multiple signaling pathways leading to tumorigenesis. Breast cancer and healthy breast cell lines were compared regarding transferrin receptor (TfR) expression via flow cytometry and transferrin binding assays. Nanobioconjugates made of low molecular weight polyethylenimine (LMW-PEI) and transferrin (Tf) were synthesized to contain a bioreducible disulfide bond. siRNA complexation was characterized by condensation assays and dynamic light scattering. Cytotoxicity, transfection efficiency, and the targeting specificity of the conjugates were investigated in TfR positive and negative healthy breast and breast cancer cell lines by flow cytometry, confocal microscopy, RT-PCR, and Western blot. Breast cancer cell lines revealed a significantly higher TfR expression than healthy breast cells. The conjugates efficiently condensed siRNA into particles with 45 nm size at low polymer concentrations, showed no apparent toxicity on different breast cancer cell lines, and had significantly greater transfection and gene knockdown activity on mRNA and protein levels than PEI/siRNA leading to targeted and therapeutic growth inhibition post GASC1 knockdown. The synthesized nanobioconjugates improved the efficiency of gene transfer and targeting specificity in transferrin receptor positive cells but not in cells with basal receptor expression. Therefore, these materials in combination with our newly identified siRNA sequences are promising candidates for therapeutic targeting of hard-to-treat BLBC and are currently further investigated regarding in vivo targeting efficacy and biocompatibility.

Molecular Dynamic Studies of the Complex Polyethylenimine and Glucose Oxidase.

Glucose oxidase (GOx) is an enzyme produced by Aspergillus, Penicillium and other fungi species. It catalyzes the oxidation of ß-d-glucose (by the molecular oxygen or other molecules, like quinones, in a higher oxidation state) to form d-glucono-1,5-lactone, which hydrolyses spontaneously to produce gluconic acid. A coproduct of this enzymatic reaction is hydrogen peroxide (H2O2). GOx has found several commercial applications in chemical and pharmaceutical industries including novel biosensors that use the immobilized enzyme on different nanomaterials and/or polymers such as polyethylenimine (PEI). The problem of GOx immobilization on PEI is retaining the enzyme native activity despite its immobilization onto the polymer surface. Therefore, the molecular dynamic (MD) study of the PEI ligand (C14N8_07_B22) and the GOx enzyme (3QVR) was performed to examine the final complex PEI-GOx stabilization and the affinity of the PEI ligand to the docking sites of the GOx enzyme. The docking procedure showed two places/regions of major interaction of the protein with the polymer PEI: (LIG1) of -5.8 kcal/mol and (LIG2) of -4.5 kcal/mol located inside the enzyme and on its surface, respectively. The values of enthalpy for the PEI-enzyme complex, located inside of the protein (LIG1) and on its surface (LIG2) were computed. Docking also discovered domains of the GOx protein that exhibit no interactions with the ligand or have even repulsive characteristics. The structural data clearly indicate some differences in the ligand PEI behavior bound at the two places/regions of glucose oxidase.

Exploring MicroRNA Expression Profiles Related to the mTOR Signaling Pathway in Mouse Embryonic Fibroblast Cells Treated with Polyethylenimine.

Although the toxicology of poly(ethylenimine) (PEI) in gene expression levels has been previously investigated, little is known about the effects of PEI on the expression of microRNAs (miRNAs) that regulate gene expression at the post-transcriptional level. In this study, we explored miRNA expression profiles related to cell death mechanisms in mouse embryonic fibroblast (MEF) cells treated with PEI by applying microarray analysis. Based on the analysis of the mTOR signaling pathway, three upregulated miRNAs (mmu-miR-3090-5p, mmu-miR-346-3p, and mmu-miR-494-3p) were verified in MEF cells treated with PEI at 24 h using real-time quantitative reverse transcriptase-polymerase chain reaction. We further demonstrated that these three upregulated miRNAs resulted in the decrease of gene and protein expressions of the target gene growth factor Igf1 in MEF cells treated with PEI or transfected with three upregulated miRNA mimics. However, these three upregulated miRNAs are not all cell-specific. Finally, we demonstrated that the mTOR signaling pathway is inhibited by autophagy induction and that the cell viability decreases in MEF cells treated with PEI or transfected with these three miRNA mimics. Collectively, our data suggested that PEI may affect the regulation of miRNAs in target cells.

Graphene Quantum Dots (GQD)-Mediated dsRNA Delivery for the Control of Fusarium Head Blight Disease in Wheat.

Graphene quantum dots (GQDs), a class of fluorescent carbon materials, have displayed significant potential in various fields such as energy devices, catalysis, sensing, bioimaging, and drug delivery. Because of their extremely small size, generally less than 100 nm, they also have tremendous potential in plant science research, especially for the delivery of nucleic acids, breaking the barrier of cell walls. In this study, we synthesized GQDs with a size range of 2-5 nm, characterized them, and surface-functionalized them with branched polyethylenimine (bPEI). We then used the surface-functionalized GQDs as carriers to deliver double-stranded RNA (dsRNA) that target two growth-and-development-related genes in Fusarium graminearum─the causative organism of the Fusarium head blight disease of wheat. The successful binding of dsRNA to GQDs-bPEIs was demonstrated through gel-shifting assays, showcasing the potential for efficient dsRNA delivery. We designed dsRNAs targeting the MGV1 and RAS1 genes of F. graminearum by using the pssRNAit pipeline, ensuring high specificity and no off-target effects. The coding sequences of the designed dsRAS1 and dsMGV1 were cloned into the L4440 vector and transformed into the Escherichia coli HT115 strain for dsRNA production. Fungal culture analysis revealed that the inclusion of dsRNAs in potato dextrose agar (PDA) media effectively slowed down the growth. Exogenous spraying experiments both in plate cultures and in intact wheat spikes demonstrated that the dsRNA:GQDs-bPEIs treatment was more effective in restricting fungal mycelium growth or the number of infected spikelets compared to naked dsRNA treatment. Our study demonstrates the promising potential of graphene quantum dots as carriers for dsRNA-based fungal disease management in wheat and other crops.

Efficient polymeric nanoparticles for RNAi in macrophage reveal complex effects on polarization markers upon knockdown of STAT3/STAT6.

Tumor associated macrophages (TAMs) are the most abundant immune cell type in the tissue microenvironment, affecting tumor progression, metastasis and therapeutic response. Different macrophage activation ("polarization") states can be distinguished: resting (M0; non-activated), pro-inflammatory/anti-tumorigenic (M1) and anti-inflammatory/pro-tumorigenic (M2). When exploring macrophages as targets in novel cancer immunotherapy approaches, TAM repolarization from the M2 into the M1 phenotype is an intriguing strategy to block their pro-tumoral and enhance their anti-tumoral properties. In the context of RNAi-based gene knockdown of M2 promoting genes, major bottlenecks include cellular siRNA delivery and correct intracellular processing. This is particularly true in case of macrophages as a cell type well-known to be notoriously hard-to-transfect. Among polymeric nanocarriers, the cationic polymer polyethylenimine (PEI) is widely explored for delivering nucleic acids. Further advanced nanocarriers are tyrosine-modified polymers based on PEI or polypropylenimine dendrimers (PPI) for highly efficient siRNA delivery in vitro and in vivo. In this paper, we explored a panel of PEI- or PPI-based nanoparticle systems for siRNA-mediated gene knockdown efficacy in macrophages and subsequent TAM repolarization. The tyrosine-modified linear 10 kDa PEI (LP10Y) or branched 5 kDa PEI (P5Y) as well as a tyrosine-modified PPI (PPI-Y) were found most efficient for gene knockdown in macrophage cell lines or primary macrophages, independent of their polarization. Knockdown of STAT6 or STAT3 led to repolarization of M2 macrophages, as indicated by alterations in various M2 and M1 marker levels. This highly specific approach also demonstrated non-redundant functions of STAT3 and STAT6. Importantly, macrophage re-polarization from M2 to M1 upon PPI-Y/siRNA-mediated STAT6 knockdown increased tumor cell phagocytosis in a co-culture model. In conclusion, we identify certain tyrosine-modified PEI- or PPI-based nanoparticles as particularly efficient for macrophage transfection, and the specific, siRNA-mediated STAT6 knockdown as a promising approach for macrophage repolarization and enhancement of their tumor cell suppressive role.

Dihydroxyphenylalanine-conjugated high molecular weight polyethylenimine for targeted delivery of Plasmid.

High molecular weight polyethylenimine (HMW PEI; branched 25 kDa PEI) has been widely investigated for gene delivery due to its high transfection efficiency. However, the toxicity and lack of targeting to specific cells have limited its clinical application. In the present investigation, L-3, 4-dihydroxyphenylalanine (L-DOPA) was conjugated on HMW PEI in order to target L-type amino acid transporter 1 (LAT-1) and modulate positive charge density on the surface of polymer/plasmid complexes (polyplexes). The results of biophysical characterization revealed that the PEI conjugates are able to form nanoparticles ≤ 180 nm with the zeta potential ranging from + 9.5-12.4 mV. These polyplexes could condense plasmid DNA and protect it against nuclease digestion at the carrier to plasmid ratios higher than 4. L-DOPA conjugated PEI derivatives were complexed with a plasmid encoding human interleukin-12 (hIL-12). Targeted polyplexes showed up to 2.5 fold higher transfection efficiency in 4T1 murine mammary cancer cell line, which expresses LAT-1, than 25 kDa PEI polyplexes prepared in the same manner. The cytotoxicity of these polyplexes was also substantially lower than the unmodified parent HMW PEI. These results support the use of L-3, 4-dihydroxyphenylalanine derivatives of PEI in any attempt to develop a LAT-1 targeted gene carrier.

Improved Manufacturing Methods of Extracellular Vesicles Pseudotyped with the Vesicular Stomatitis Virus Glycoprotein.

Extracellular vesicles (EV), which expose the vesicular stomatitis virus glycoprotein (VSVG) on their surface, are used for delivery of nucleic acids and proteins in human cell lines. These particles are biomanufactured using methods that are difficult to scale up. Here, we describe the development of the first EV-VSVG production process in serum-free media using polyethylenimine (PEI)-based transient transfection of HEK293 suspension cells, as well as the first EV-VSVG purification process to utilize both ultracentrifugation and chromatography. Three parameters were investigated for EV-VSVG production: cell density, DNA concentration, and DNA:PEI ratio. The best production titer was obtained with 3 × 106 cells/mL, a plasmid concentration of 2 µg/mL, and a DNA:PEI ratio of 1:4. The production kinetics of VSVG was performed and showed that the highest amount of VSVG was obtained 3 days after transfection. Addition of cell culture supplements during the transfection resulted in an increase in VSVG production, with a maximum yield obtained with 2 mM of sodium butyrate added 18 h after transfection. Moreover, the absence of EV-VSVG during cell transfection with a GFP-coding plasmid revealed to be ineffective, with no fluorescent cells. An efficient EV-VSVG purification procedure consisting of a two-step concentration by low-speed centrifugation and sucrose cushion ultracentrifugation followed by a heparin affinity chromatography purification was also developed. Purified bioactive EV-VSVG preparations were characterized and revealed that EV-VSVG are spherical particles of 176.4 ± 88.32 nm with 91.4% of protein similarity to exosomes.

Transformation of Bacillus thuringiensis plasmid DNA by a new polyethylenimine polymeric nanoparticles method.

Although electroporation technique has been mostly used to transform Bacillus thuringiensis (Bt), this method is not readily applicable to strains other than the one for which it was optimized. Polyethylenimine (PEI) is a golden standard non-viral vector that interacts with plasmids to form compact polymeric nanoparticles (PNPs) via electrostatic interactions. This PNPs system is very attractive because they are easily prepared, able to carry large nucleic acid constructs, and show low toxicity. In this study, PEI/pBTdsSBV-VP1 PNPs were successfully prepared at various N/P ratios which is positively-chargeable polymer amine (N = nitrogen) groups to negatively-charged nucleic acid phosphate (P) groups, and the internalization of the complexes into Bt 4Q7 was confirmed by confocal laser scanning microscopy. The PEI-mediated transformation showed similar efficiency comparable to that of electroporation method, suggesting that the method of PNPs will be an effective alternative for transformation of Bt strains.

Polyethyleneimine stabilized silver nanoparticles as an efficient and selective colorimetric assay for promethazine.

Development of simple, facile, and on-spot colorimetric assays for drugs and pesticides based on metal nanoparticles is an emerging field of modern scientific research. Herein, a branched polyethyleneimine (PEI) is used to stabilize silver nanoparticles (AgNPs) through a simple one-pot, two-phase protocol. As the primary goal of the research, the synthesized PEI-AgNPs are employed for an efficient and selective quantitative detection of promethazine (PRO). The typical yellow color of PEI-AgNPs changed to orangish-brown as soon as PRO is added which is further endorsed by an increase in the intensity of the SPR band. The electrostatic forces are responsible for the steric stabilization of silver ions in the micro-domains of the PEI. PRO addition in PEI-AgNPs decreased the average hydrodynamic size and increased apparent positive charge of AgNPs. These changes might be attributed to the presence of the sulfur group in PRO. The limit of detection, the limit of quantification, and the dynamic range of detection of PRO through PEI-AgNPs are found to be 0.003 µM, 0.1 µM, and 0.1-200 µM, respectively. Moreover, PEI-AgNPs allowed reliable, efficient, selective, and quick quantitative detection of PRO in environmental, biological, and commercial drug samples in the presence of other interfering drugs and metal salts. The proposed PRO sensor renders an excellent platform for its quick and on-spot detection without requiring a well-equipped lab setup. Up to the best of our knowledge, the proposed PRO sensor is the first of its kind (colorimetric) in the list of proposed instrumental methods for determination of PRO. The quantitation of PRO as obtained by proposed sensor is compared with UV-Vis spectroscopy and UPLC. Finally, excellent performance of PEI-AgNPs based sensor for biological, environmental, and commercial samples is demonstrated in comparison to UV-Vis spectroscopy and UPLC.

Efficient Transient Expression of Plasmid DNA Using Poly (2-(N,N-Dimethylamino) Ethyl Methacrylate) in Plant Cells.

Nanomaterials have been widely studied for their potential to become the new generation of nanocarriers in gene transfection, yet it remains still difficult to apply them efficiently and succinctly to plant cells. Poly (2-(N,N-dimethylamino) ethyl methacrylate) (PDMAEMA), which possesses temperature and pH dual-sensitivity, has largely been applied in animal cells, but it is rarely involved in plant cells. As a proof of concept, PDMAEMA as a gene carrier is incubated with plasmid GFP (pGFP) to explore its transfection ability in plants, and cationic polymer polyethylenimine (PEI) is used as a control. pGFP was efficiently condensed into the nanostructure by electrostatic interactions at an N/P (amino group from cationic polymers/phosphate group from plasmid DNA (pDNA)) ratio of 15; after complexation into nanocarriers, pGFP was protected from endonuclease degradation according to the DNase I digestion assay. After incubation with protoplasts and leaves, GFP was observed with confocal microscopy in plant cells. Western blot experiments confirmed GFP expression at the protein level. Toxicity assay showed PDMAEMA had a lower toxicity than PEI. These results showed that transient expression of pGFP was readily achieved in Arabidopsis thaliana and Nicotiana benthamiana. Notably, PDMAEMA showed lower cytotoxicity than PEI upon incubation with Nicotiana benthamiana leaves. PDMAEMA exhibited great potency for DNA delivery in plant cells. This work provides us with new ideas of more concise and more effective methods for plant transformation.

Cardiomyocyte-targeted anti-inflammatory nanotherapeutics against myocardial ischemia reperfusion (IR) injury.

Myocardial ischemia reperfusion (IR) injury is closely related to the overwhelming inflammation in the myocardium. Herein, cardiomyocyte-targeted nanotherapeutics were developed for the reactive oxygen species (ROS)-ultrasensitive co-delivery of dexamethasone (Dex) and RAGE small interfering RNA (siRAGE) to attenuate myocardial inflammation. PPTP, a ROS-degradable polycation based on PGE2-modified, PEGylated, ditellurium-crosslinked polyethylenimine (PEI) was developed to surface-decorate the Dex-encapsulated mesoporous silica nanoparticles (MSNs), which simultaneously condensed siRAGE and gated the MSNs to prevent the Dex pre-leakage. Upon intravenous injection to IR-injured rats, the nanotherapeutics could be efficiently transported into the inflamed cardiomyocytes via PGE2-assisted recognition of over-expressed E-series of prostaglandin (EP) receptors on the cell membranes. Intracellularly, the over-produced ROS degraded PPTP into small segments, promoting the release of siRAGE and Dex to mediate effective RAGE silencing (72%) and cooperative antiinflammatory effect. As a consequence, the nanotherapeutics notably suppressed the myocardial fibrosis and apoptosis, ultimately recovering the systolic function. Therefore, the current nanotherapeutics represent an effective example for the co-delivery and on-demand release of nucleic acid and chemodrug payloads, and might find promising utilities toward the synergistic management of myocardial inflammation. Electronic Supplementary Material: Supplementary material (experimental methods, RNA and primer sequences, 1H NMR spectra, FTIR spectrum, TEM images, zeta potential, drug loading content, RNA and drug release, cytotoxicity, etc.) is available in the online version of this article at 10.1007/s12274-022-4553-6.

Micrometric DNA/PEI polyplexes correlate with higher transient gene expression yields in HEK 293 cells.

DNA delivery with polyethylenimine (PEI) has been widely used in the last three decades for the transfection of mammalian cells. Advances in novel characterization techniques at the nanometric scale offer new opportunities to revisit the physicochemical properties of DNA/PEI polyplexes that lead to efficient transfection. In this work, these properties are tuned by studying the synergies between simple parameters such as NaCl concentration, pH and incubation time in the DNA/PEI polyplex preparation protocol by means of Design of Experiments (DoE). By doing so, a model is obtained where an optimal NaCl concentration of 125 mM and an incubation time of 11 min provided the highest transfection yields. Correlation analyses between the physicochemical properties of DNA/PEI polyplexes and the predicted model responses revealed the existence of an optimal degree of aggregation in the pre-complexing solution to attain the highest transfection efficiencies. The presence of these micrometric DNA/PEI polyplex aggregates was confirmed by several nanoparticle characterization techniques including cryo-TEM, DLS and flow virometry. The findings provide a better understanding of the role of DNA/PEI aggregates in transient gene expression approaches, in particular considering that similar complexation protocols and saline solutions are widely used for the transfection of mammalian cell cultures.

Robust cellulose-based composite adsorption membrane for heavy metal removal.

Adsorptive membranes offer an effective mode to remove heavy metal ions from contaminated water, due to the synergies made possible by low-cost, high-affinity adsorbents and highly scalable filtration in one system. However, the development of adsorptive membranes is hampered by their instability in the aqueous phase and low binding affinity with a broad spectrum of heavy metals in a reasonable flux. Herein, a regenerated cellulose support membrane is strongly grafted with stable and covalent-bonded polyelectrolyte active layers synthesized by a reactive layer-by-layer (LBL) assembly method. The LBL assembled layers have been successfully tested by scanning electron microscopy, Fourier-transform infrared spectroscopy and X-ray photo-electron spectroscopy. The covalent bonding provides the membrane with long-term stability and a tunable water flux compared to a membrane assembled by electrostatic bonding. The maximum adsorption capacity of the membrane active layers can reach up to 194 mg/g, showing more efficient adsorption at lower heavy metal concentration and higher pH value of feed solution. The membrane can remove multiple ions, such as Cu, Pb, and Cd, by adsorption and is easy to be regenerated and recovered. The strong covalent bonding can extend the membrane lifetime in water purification to remove multiple heavy metals at high efficiency.

Hapten-Branched Polyethylenimine as a New Antigen Affinity Ligand to Purify Antibodies with High Efficiency and Specificity.

Purification of antibodies has become a critical factor in antibody production. A high-purity specific antibody against antigens, especially small molecules, seems to be difficult to obtain, even with the help of a protein A affinity column, which is a conventional and broadly used ligand for the separation of antibody and non-antibody proteins. Therefore, it is urgent to develop a cheap, simple, efficient, and stable method to separate the specific antibody from other antibodies. In this study, to improve the sensitivity and accuracy of immunoassay results, enrofloxacin (ENR) was grafted onto polyethylenimine (PEI) by the abundant amino groups and then the whole ligand (ENR-PEI) was conjugated to CNBr-Sepharose 4B to prepare the affinity column for the purification of the specific antibody against ENR from polyclonal antibodies. Scanning electron microscopy and Fourier transform infrared spectroscopy verification showed that Sepharose 4B was successfully modified by ENR-PEI with excellent uniformity. The capacity of the prepared column could reach to 6.15 mg of specific antibody with high purity per milliliter resin due to the high coupling ratio (49.3:1) of ENR on PEI, and the IC50 value of the antibody after purification was 47.58 ng/mL with a lowest limit of detection (IC10) of 1.099 ng/mL-18 times lower than those of the antibody purified through the protein A column. All the results showed that this new kind of resin could be used as the potential ligand in the purification of the trace-specific antibody against antigens in complex mixtures with high efficiency and specificity.

Phosphorus adsorption behavior of industrial waste biomass-based adsorbent, esterified polyethylenimine-coated polysulfone-Escherichia coli biomass composite fibers in aqueous solution.

This study sought to develop a highly efficient adsorbent material for phosphorus (P) removal via valorization of industrial Escherichia coli biomass waste. To ensure an easy and fast recovery after the sorption process, the E. coli biomass waste was immobilized into polysulfone matrix. Additionally, to improve P sorption capacity, the sorbent surface was coated with polyethylenimine (PEI) and further chemically modified. The P uptakes of the developed sorbent (decarboxylated PEI-modified polysulfone-biomass composite fiber, DC-PEI-PEF) were significantly affected by pH. Moreover, the maximum sorption capacity (qmax) of DC-PEI-PEF was estimated as 30.46 ± 1.09 mg/g at neutral pH, as determined by a Langmuir isotherm model. Furthermore, DC-PEI-PEF could reach sorption equilibrium within 5 min and exhibited reusability potential. The partition coefficient of the newly developed material (DC-PEI-PEF) was calculated as 0.387 mg/g⋅µM at 4 mg/L of initial P concentration and decreased as initial P concentrations increased. Therefore, DC-PEI-PEF could be suggested as a promising adsorbent for application in direct phosphorus removal from natural aquatic environments.