Polyvinyl Pyrrolidone Induced "Confinement Effect" on PbI2 and the Improvement on Crystallization and Thermal Stability of Perovskite.

Polyvinyl pyrrolidone is blended in PbI2 with varied concentration, so as to study the coarsening dynamics of perovskite during the two-step growth method. It is observed that polyvinyl pyrrolidone hinders the crystallization of PbI2 and helps to form a more amorphous PbI2 matrix, which then improves perovskite crystallization. As the blending concentration increases from 0 to 2 mM, average crystallite/grain size of perovskite increases from 40.29 nm/0.79 µm to 84.35 nm/1.02 µm while surface fluctuation decreases slightly from 25.64 to 23.96 nm. The observations are caused by the "confinement effect" brought by polyvinyl pyrrolidone on PbI2 . Elevating blending concentration of polyvinyl pyrrolidone results in smaller PbI2 crystallites and more amorphous PbI2 matrix, thus reducing the diffusion/reaction barrier between PbI2 and organic salt and favoring perovskite crystallization. As blending concentration increases from 0 to 2 mM, the device efficiency rises from 19.76 (± 0.60) % to 20.50 (± 0.89) %, with the optimized value up to 22.05%, which is further improved to 24.48% after n-Octylammonium iodide (OAI)-basing surface modification. The study enlarges the scope of "confinement effect" brought by polymer molecules, which is beneficial for efficient and stable perovskite solar cell fabrication.

Transcutaneous Delivery of Dexamethasone Sodium Phosphate Via Microneedle-Assisted Iontophoretic Enhancement - A Potential Therapeutic Option for Inflammatory Disorders.

AIM: This study aimed to fabricate dexamethasone sodium phosphate loaded microneedle arrays (MNA) and investigate their efficiency in combination with iontophoresis for the treatment of hind paw oedema in rats. METHODS: Drug loaded polyvinyl alcohol, polyvinyl pyrrolidone and D-sorbitol-based MNA11 were fabricated by vacuum micromolding. Physicochemical, morphological, thermal, in-silico, in-vitro insertion ability (on parafilm) and drug release studies were performed. Ex-vivo permeation, in-vivo insertion and anti-inflammatory studies were performed in combination with iontophoresis. RESULTS: MNA11 displayed sharp-tipped projections and acceptable physicochemical features. Differential scanning calorimetry results indicated that drug loaded MNA11 were amorphous solids. Drug interacted with PVP and PVA predominately via hydrogen bonding. Parafilm displayed conspicuously engraved complementary structure of MNA11. Within 60 min, 91.50 ± 3.1% drug released from MNA11. A significantly higher i.e., 95.06 ± 2.5% permeation of drug was observed rapidly (within 60 min) from MNA11-iontophoresis combination than MNA11 i.e., 84.07 ± 3.5% within 240 min. Rat skin treated using MNA11 and MNA11-iontophoresis showed disruptions / microchannels in the epidermis without any damage to underlying anatomical structures. MNA11-iontophoresis combination led to significant reduction (83.02 ± 3.9%) in paw oedema as compared to MNA11 alone (72.55 ± 4.1%). CONCLUSION: MNA11-iontophoresis combination can act as a promising candidate to deliver drugs transcutaneously for treating inflammatory diseases.

Natural moisturising factor constituents in South African nursing students.

BACKGROUND: The majority of South African healthcare workers are Black Africans with dark-pigmented skin. Studies on how the markers of skin barrier function and natural moisturising factor (NMF) compare between dark and light-pigmented skin are limited. Quantifying NMF in a nursing student population during their practical training at university may provide valuable insight into their potential susceptibility to skin conditions associated with low NMF. OBJECTIVES: The objectives of this study were to quantify and compare NMF content of Black African, Mixed Race and White nursing students from their dominant dorsal hand. METHODS: Forty-nine White, 32 Black African and 5 Mixed Race nursing students participated in this study. Tape strip samples were collected from the participants' dominant dorsal hand and NMF content was measured, including histidine (HIS), pyrrolidone carboxylic acid (PCA), trans-urocanic acid (t-UCA) and cis-urocanic acid (c-UCA), as well as cytokines interleukin-1 alpha (IL-1α) and interleukin-1 receptor antagonist (IL-1RA). RESULTS: No statistically significant differences in PCA, t-UCA, c-UCA, IL-1α or IL-1RA were found between Black African and White nursing students. HIS was significantly (p = 0.001) higher in White nursing students when compared to Black African students. The ratio of tot-UCA/HIS was significantly higher in Black Africans (p = 0.0002) when compared to White nursing students. CONCLUSION: No significant differences were established in NMF content between White and Black African nursing students, other than HIS which was significantly higher in White students than in Black African students. Different HIS levels between the racial groups suggest variation in histidase activity which may be related to skin pH and pigmentation. This finding may suggest that nursing students at the beginning of their careers may have similar susceptibility to skin diseases related to NMF.

Development of sensitive spectrofluorometric approach based on formation of pyrrolidone derivative for determination of linagliptin through condensation reaction with ninhydrin and phenylacetaldehyde: Application to content uniformity and real plasma.

The new drug linagliptin belongs to the class of dipeptidyl peptidase-4 enzyme inhibitors. Linagliptin is used to treat type 2 diabetes and is taken orally either alone or in combination with other drugs. In this instance, a new, simple, and economical technique for analyzing linagliptin was developed by the effective use of a pyrrolidone derivative. The primary amine group of linagliptin permits its condensation with ninhydrin (0.14% w/v) to produce a fluorescent product in the presence of phenylacetaldehyde (0.02% v/v). All experimental parameters were carefully examined and adjusted in order to monitor the generation of the pyrrolidone derivative at excitation and emission wavelengths of 385 and 475 nm, respectively. The calibration graph was made by plotting the intensity of the fluorescence in relation to linagliptin concentration. A significant linearity was found for values ranging from 20 to 460 ng/mL. The process's validity has been verified by a thorough assessment of the instructions provided by the International Conference on Harmonization (ICH). The results indicate excellent uniformity with a reference method, showing that there is no substantial difference in precision and accuracy. The proposed approach was utilized for determining linagliptin in real rat plasma successfully owing to its high sensitivity. Additionally, the proposed approach was evaluated using the Eco-Scale evaluation tool and showed a high degree of eco-friendliness (86/100).

A new injection method for identifying the subpopliteal recess of the knee.

The posterolateral region of the knee has a complex and diverse anatomy. Hydrarthrosis of the knee can potentially communicate with other parts of the joint space. The joint fluid distribution reflects anatomical communications between synovial spaces. To observe the continuity between the knee joint cavity and the surrounding bursa, we devised a dissection method with a new injection agent, an eosin-containing congealed liquid that spreads uniformly over the entire space. The purpose of this study was to perform a detailed examination of the subpopliteal recess (SPR) where a bursa connects to the knee joint capsule. We also reported the advantages of this new injection agent compared with conventional materials (latex and epoxy resin). Twenty-two formalin-fixed cadavers (34 knees), two N-vinyl-pyrrolidone (NVP)-fixed cadavers (4 knees), and two cadavers (3 knees) fixed by Thiel's method were used. After filling the knee joint space and SPR with eosin congealed liquid, the specimens were dissected to investigate the morphology of the SPR. In addition, three different types of injection agents were assessed. The SPR extended distally along the popliteus tendon. The SPR length was 22.64 ± 11.38 mm from the upper end of the lateral tibial condyle to the lower end of the depression. The existence of a fabellofibular ligament made the SPR significantly longer, but abrasion of the femoral articular cartilage did not affect the SPR. Furthermore, the relationship between the popliteus muscle and the SPR was classified into three types (types 1-3). Types 2 and 3 in which the SPR extended to the proximal tibiofibular joint may cause instability of the knee joint. The eosin congealed liquid was highly useful in many aspects, such as fluidity and injection workability. The new dissection method with eosin congealed liquid provides insights into the anatomy of the posterior lateral knee, which are useful for radiological diagnoses and clinical treatments.

Synthesis and Characterization of Durable Antifog Silane-Pyrrolidone Thin Coatings onto Polymeric Films.

The fogging of transparent surfaces-condensation of water vapor in the air to a small liquid surface at specific environmental conditions-scatters incident light, creating a blurry vision. Fogging presents a significant challenge in various industries, adversely affecting numerous applications including plastic packaging, agricultural films, and various optical devices. Superhydrophobic or superhydrophilic coatings are the main strategies used to induce antifogging to minimize light scattering. Here, an innovative approach is introduced to mitigate fogging by modifying the surface properties of polymeric films, focusing on corona-treated polyethylene as a model. Coatings were prepared in two successive steps: the addition of radical co-polymerization of methacryloxypropyltriethoxysilane and N-vinylpyrrolidone followed by the step-growth Stöber polymerization of the formed silane monomer. The polymeric dispersion was spread on oxidized films via a Mayer rod and dried. Scanning and force microscopy, FIB, XPS, and UV-vis spectroscopy revealed a thin coating composed of cross-linked siloxane (Si-O-Si) covalently bonded to surface hydroxyls exposing pyrrolidone groups. Contact angle measurements, hot-fog examination, and durability tests indicated a durable antifogging activity.

Tailoring of Ultrasmall NiMnO3 Nanoparticles: Optimizing Synthesis Conditions and Solvent Effects.

Nickel manganese oxide (NiMnO3) combines magnetic and dielectric properties, making it a promising material for sensor and supercapacitor applications, as well as for catalytic water splitting. The efficiency of its utilization is notably influenced by particle size. In this study, we investigate the influence of thermal treatment parameters on the phase composition of products from alkali co-precipitation of nickel and manganese (II) ions and identify optimal conditions for synthesizing phase-pure nickel manganese oxide. Ultrafine nanoparticles of NiMnO3 (with sizes as small as 2 nm) are obtained via liquid-phase ultrasonic dispersion, exhibiting a narrow size distribution. A systematic exploration of the solvent nature (water, N-methyl-2-pyrrolidone, dimethyl sulfoxide, dimethylformamide) on the efficiency of ultrasonic dispersion of NiMnO3 nanoparticles is provided. It is demonstrated that particle size is influenced not only by absorbed acoustic power, dependent on the physical properties of the used solvent (boiling temperature, gas solubility, viscosity, density) but also by the chemical stability of the solvent under prolonged ultrasonic treatment. Our findings provide insights for designing ultrasonic treatment protocols for nanoparticle dispersions with tailored particle sizes.

Preparation of Modified Polycarboxylate by Pyrrolidone for Using as a Dispersant in Cobalt Blue Nano-Pigment Slurry.

In this paper, N-vinylpyrrolidone was copolymerized with acrylic acid and itaconic acid by free radical polymerization, and a series of polyacrylic acid-co-itaconic acid-co-N-vinylpyrrolidone (PAIN) dispersants with different pyrrolidone ligand contents were synthesized and characterized. Then, the cobalt blue nano-pigment slurry (20 wt%) was prepared through a water-based grinding method, and the optimum grinding technology was explored and determined as follows: PAIN2 as a dispersant, a dispersant dosage of 10 wt%, and a grinding time of 480 min. According to this optimum grinding technology, the prepared pigment slurry had a significantly decreased agglomeration, the D90 of which was 82 nm, and separately increased to 130 nm and 150 nm after heat storage for 3 and 7 days, exhibiting excellent heat storage stability. Additionally, its TSI value was also the lowest (1.9%), indicating good dispersion stability. The QCM and adorption capacity measuring results showed PAIN2 had a larger adsorption capacity, and the formed adsorption layer had a higher rigidity and was not easy to fall off. This was caused by both the interaction of carboxyl groups and the pyrrolidone ligand (strong coordination interaction) in PAIN2 with cobalt blue. The XPS and FT-IR measurements further proved the above-mentioned adsorption mechanism.

Improved Thermal Stability and Film Uniformity of Halide Perovskite by Confinement Effect brought by Polymer Chains of Polyvinyl Pyrrolidone.

Polyvinyl pyrrolidone (PVP) is doped to PbI2 and organic salt during two-step growth of halideperovskite. It is observed that PVP molecules can interact with both PbI2 and organic salt, reduce the aggregation and crystallization of the two, and then slow down the coarsening rate of perovskite. As doping concentration increases from 0 to 1 mM in organic salt, average crystallite size of perovskite decreases monotonously from 90 to 34 nm; Surface fluctuation reduces from 259.9 to 179.8 nm at first, and then increases; Similarly, surface roughness decreases from 45.55 to 26.64 nm at first, and then rises. Accordingly, a kind of "confinement effect" is resolved to crystallite growth and surface fluctuation/roughness, which helps to build compact and uniform perovskite film. Density of trap states (t-DOS) is cut down by ≈60% at moderate doping  (0.2 mM). Due to the "confinement effect", power conversion efficiency of perovskite solar cells is improved from 19.46 (±2.80) % to 21.50 (±0.99) %, and further improved to 24.11% after surface modification. Meanwhile, "confinement effect" strengthens crystallite/grain boundaries and improves thermal stability of both film and device. T80 of device increases to 120 h, compared to 50 h for reference ones.

A Multi-Enzyme Cascade for Efficient Production of Pyrrolidone from l-Glutamate.

Pyrrolidone is a high value-added monomer and an important active drug intermediate. However, the efficient enzymatic synthesis of pyrrolidone remains a challenge. Here, we developed and reconstructed a three-enzyme cascade pathway using Escherichia coli BL21(DE3) for the production of pyrrolidone from l-glutamate (l-Glu). The carnitine-CoA ligase from Escherichia coli (EcCaiC) at a low expression level and with a low activity is regarded as the rate-limiting enzyme. Here, we obtained the best EcCaiCF380M/N430D double mutant with a kcat/Km value 1.5 times higher than that of the wild type via mechanism-based protein engineering. For this, we (i) eliminated the steric hindrance of the loop ring to improve the precatalytic conformation of the adenylation intermediate and (ii) fixed the hinge region to stabilize the closed conformation of the enzyme. Furthermore, ribosome-binding site (RBS) optimization led to an increase in the expression level of EcCaiCF380M/N430D, which was then cloned into the plasmid pET-EcCaiCF380M/N430D-DegoPPK2. Finally, under optimal induction and transformation conditions, 16.62 g/L of pyrrolidone was generated from 30 g/L l-Glu (batch feeding) within 24 h with a molar conversion rate of 95.2% and the highest productivity ever obtained, to our knowledge (0.69 g/L/h). Our findings demonstrate a strategy that is potentially attractive for the industrial production of pyrrolidone. IMPORTANCE This study developed a three-enzyme cascade pathway for the production of pyrrolidone from l-Glu. The catalytic efficiency of carnitine CoA ligase from Escherichia coli (EcCaiC) was improved by mechanism-based protein engineering, and the titer of pyrrolidone was further increased by ribosome-binding site (RBS), induction conditions, and conversion conditions optimization. Finally, we efficiently produced pyrrolidone by one pot in vivo with 95.2% conversion and 0.69 g/L/h productivity. Our study provides a new possibility for the industrial production of enzymatic synthesis of pyrrolidone.

Improved Transdermal Delivery of Rabies Vaccine using Iontophoresis Coupled Microneedle Approach.

AIM: This study was aimed to develop rabies vaccine incorporated microneedle (MN) patches and evaluate the immunogenicity of prepared formulations in combination with iontophoresis. METHODS: Patches comprising of polyvinyl pyrrolidone, hyaluronic acid and polyethylene glycol 400 were engineered by vacuum micromolding technique. Physical evaluation of patches included determination of folding endurance, % swelling and morphological features. In vitro release study was performed in skin simulant agarose gel using model drug (methylene blue) loaded patches. In vitro insertion ability was assessed using stratum corneum simulant parafilm. In vivo insertion study was performed in rats. Immunogenicity was evaluated in dogs by determining immunoglobulin G (IgG) and rabies virus neutralizing antibodies (RVNA) titer. RESULTS: Patches displayed uniformly distributed microprojections with pointed tips and smooth surface, ~ 70% swelling, remained intact for ~ 200 foldings and successfully penetrated the parafilm. The area covered by model drug across agarose gel was almost double following treatment with MN-iontophoresis combination (MNdi) compared to MN alone (MNdo). Histological examination of rat skin treated with vaccine laden MN (MNvo) and MN-iontophoresis combination (MNvi) confirmed the formation of grooves in epidermis without any damage to the deep vasculature. A ~ 73% and ~ 206% increase (compared to untreated counterpart) was observed in the IgG titer of MNvo and MNvi treated dogs, respectively. The RVNA titer was increased by ~ 1.2 and ~ 2.2 times (compared to threshold value) after MNvo and MNvi treatment, respectively. CONCLUSION: MN-iontophoresis combination provided relatively potent immunogenic response over the conventional intramuscular injection, hence, can be used for administering vaccines transcutaneously.

Synthesis of Multiblock Copolymer Composed of Biodegradable Poly(butylene succinate) and Poly(2-pyrrolidone): Impact of Each Block Length on the Mechanical Properties.

A series of multiblock copolymers comprising a systematic combination of biomass-originated and biodegradable poly(butylene succinate) (PBS) and poly(2-pyrrolidone) (PA4) units is synthesized with various mean degrees of polymerization (mDP) of each unit. Despite the inherent immiscibility of PBS and PA4, multiblock structure allows to mix the two components in the solution-cast films from solution. The mechanical properties of the cast films are highly dependent on the mDP of each unit, as demonstrated by tensile tests. The film of the copolymer with the lowest mDP of each unit (PBS: 17, PA4: 10) is transparent and exhibits extremely high elongation at break (> 400%) and high tensile stress (39.5 MPa) with strain hardening. The films with 50% or higher crystallinity are brittle and opaque, while a decrease in crystallinity can result in higher elongation, as revealed by wide-angle X-ray diffraction measurements.

Thermodynamic Assessment of Triclocarban Dissolution Process in N-Methyl-2-pyrrolidone + Water Cosolvent Mixtures.

Solubility is one of the most important physicochemical properties due to its involvement in physiological (bioavailability), industrial (design) and environmental (biotoxicity) processes, and in this regard, cosolvency is one of the best strategies to increase the solubility of poorly soluble drugs in aqueous systems. Thus, the aim of this research is to thermodynamically evaluate the dissolution process of triclocarban (TCC) in cosolvent mixtures of {N-methyl-2-pyrrolidone (NMP) + water (W)} at seven temperatures (288.15, 293.15, 298.15, 303.15, 308.15, 313.15 and 318.15 K). Solubility is determined by UV/vis spectrophotometry using the flask-shaking method. The dissolution process of the TCC is endothermic and strongly dependent on the cosolvent composition, achieving the minimum solubility in pure water and the maximum solubility in NMP. The activity coefficient decreases from pure water to NMP, reaching values less than one, demonstrating the excellent positive cosolvent effect of NMP, which is corroborated by the negative values of the Gibbs energy of transfer. In general terms, the dissolution process is endothermic, and the increase in TCC solubility may be due to the affinity of TCC with NMP, in addition to the water de-structuring capacity of NMP generating a higher number of free water molecules.

Au Polyhedron Array with Tunable Crystal Facets by PVP-Assisted Thermodynamic Control and Its Sharp Shape As Well As High-Energy Exposed Planes Co-Boosted SERS Activity.

A route is developed for directly growing 2D Au polyhedron arrays with controllable exposed facets of polyhedron by utilizing the substrate-supported 2D Au quasi-spherical nanoparticle arrays as the Au seed arrays, which cannot be realized by traditional lithography. In the reaction system, polyvinyl pyrrolidone (PVP) plays a vital role in guiding the reduced Au atoms and stabilizing the substrate-supported Au seeds. More importantly, by thermodynamic control, PVP as a capping agent can further direct the formation of {111} facets. The key to guarantee the integrity and periodicity of array is a proper reduction of Au ions and low growth rate of crystal. Benefiting from the higher electric field intensity near the sharp vertexes and edges of Au polyhedra and the exposed {110} facets with high energy, the Au polyhedron array with {110} facets encasing polyhedron exhibits good, stable surface enhanced Raman scattering activity toward 4-aminothiophenol among the involved arrays. The proposed fabrication approach tremendously enriches the structural diversity of Au nanoarrays on substrates and greatly overcomes the shortcoming of traditional lithography.

Development of a 2-pyrrolidone biosynthetic pathway in Corynebacterium glutamicum by engineering an acetyl-CoA balance route.

2-Pyrrolidone is widely used in the textile and pharmaceutical industries. Here, we established a 2-pyrrolidone biosynthesis pathway in Corynebacterium glutamicum, by expressing glutamate decarboxylase (Gad) mutant and ß-alanine CoA transferase (Act) which activates spontaneous dehydration cyclization of GABA to form 2-pyrrolidone. Also, the 5' untranslated regions (UTR) strategy was used to increase the expression of protein. Furthermore, considering the importance of acetyl-CoA in the 2-pyrrolidone synthesis pathway, the acetyl-CoA synthetase (acsA) gene was introduced to convert acetate into acetyl-CoA thus achieving the recyclability of the economy. Finally, the fed-batch fermentation of the final strain in a 5 L bioreactor produced 10.5 g/L 2-pyrrolidone within 78 h, which increased by 42.5% by altering the level of gene expression. This is the first time to build the basic chemical 2-pyrrolidone from glucose in one step in C. glutamicum.

Tunable, stable, and reversible n-type doping of MoS2via thermal treatment in N-methyl-2-pyrrolidone.

Here, we report a highly stable and reversible n-type doping of monolayer MoS2using thermal treatment in N-methyl-2-pyrrolidone (NMP). The Raman and photoluminescence spectroscopic measurements as well as the device performance of the MoS2transistors suggested a stronger n-type doping effect with increasing time and temperature of the thermal treatment in NMP. Within the given time (5-60 min) and temperature (50 °C-110 °C), the surface treatment in NMP provided an electron concentration from 6 × 1010to 2 × 1012cm-2. Owing to the n-type doping effect, the thermal treatment in NMP reduced the contact resistance and enhanced the field-effect mobility of the MoS2transistors. The n-type doping via thermal treatment in NMP remained effective for more than 12 months in ambient air, and could be completely removed after immersion in isopropanol. These results demonstrate that thermal treatment in NMP can be a facile and effective route to achieve stable and reversible doping of two-dimensional materials including MoS2for their applications in high-performance electronics and optoelectronics.

Zinc oxide nanoparticles: Chemical and green synthesis, characterization, and comparative evaluation of their effects on caprine testis in vitro.

The present research was designed to investigate the potential effects of zinc oxide nanoparticles synthesized by both chemical and green method in caprine testis. In this study, rod-shaped zinc oxide nanoparticles (ZnONPs) with diameter less than 100 nm were prepared by chemical and green method using polyvinyl pyrrolidone (PVP) and Ocimum sanctum leaf extract as stabilizing agents respectively. X-ray diffraction, Fourier transform infrared spectroscopy, LCMS, field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM) and EDX were utilized to characterize the synthesized zinc oxide nanoparticles. The histomorphological alterations of both chemically synthesized and biosynthesized zinc oxide nanoparticles were evaluated after administration of two doses (10 µg/ml and 20 µg/ml) for exposure duration of 4 h and 8 h. Chemically synthesized zinc oxide nanoparticles induced significant damage in testicular cells in dose and time-dependent manner. The Histomorphological changes included desquamation in germinal epithelium, pyknosis in germ cells, increased vacuolization, loss of mature spermatozoa from lumen and wide interstitial space between seminiferous tubules. Protective effects of biosynthesized zinc oxide nanoparticles were recorded at lower dose whereas some alterations were observed when treated with 20 µg/ml for 4 h and 8 h culture duration. The results confirmed that phytochemicals present in leaf extract of O. sanctum mitigated the zinc oxide nanoparticles induced toxicity, proving biosynthesized nanoparticles are better than chemically synthesized nanoparticles.

Workplace environmental exposure level guide: n-Methyl-2-pyrrolidone.

n-Methyl-2-pyrrolidone (NMP) is a widely used solvent with a mild amine-like odor that can exist in a vapor or aerosol at moderate temperatures. In humans, NMP was reported to induce weak and transient eye irritation and headache. NMP was not a dermal sensitizer and has a low acute toxicity via oral, dermal, and inhalation routes. NMP was not genotoxic/mutagenic in a battery of in vitro and in vivo studies. Furthermore, NMP was not carcinogenic in rats although species-specific liver tumors were identified in mice. Chronic studies in the rat provided a NOAEL of 10 ppm (40 mg/m3) causing only minor effects in males (slightly reduced mean body weight) at 100 ppm (400 mg/m3). Developmental toxicity was considered the critical endpoint (decreased fetal body weights at non-maternally toxic doses). Benchmark dose and PBPK models were utilized to derive an internal dose of 350-470 mg·h/L as a NOAEL for this response and a human equivalent air concentration of 350-490 ppm. With the application of adjustment factors, an 8-h time-weighted average WEEL value of 15 ppm (60 mg/m3) was derived and is expected to provide a significant margin of safety against any potential adverse health effects in workers. To address the potential for respiratory irritation, a short-term exposure level of 30 ppm (120 mg/m3) was derived, and a skin notation is assigned because of the contribution of dermal absorption to the systemic toxicity of NMP.

Effect of Phosphorus Precursor, Reduction Temperature, and Support on the Catalytic Properties of Nickel Phosphide Catalysts in Continuous-Flow Reductive Amination of Ethyl Levulinate.

Levulinic acid and its esters (e.g., ethyl levulinate, EL) are platform chemicals derived from biomass feedstocks that can be converted to a variety of valuable compounds. Reductive amination of levulinates with primary amines and H2 over heterogeneous catalysts is an attractive method for the synthesis of N-alkyl-5-methyl-2-pyrrolidones, which are an environmentally friendly alternative to the common solvent N-methyl-2-pyrrolidone (NMP). In the present work, the catalytic properties of the different nickel phosphide catalysts supported on SiO2 and Al2O3 were studied in a reductive amination of EL with n-hexylamine to N-hexyl-5-methyl-2-pyrrolidone (HMP) in a flow reactor. The influence of the phosphorus precursor, reduction temperature, reactant ratio, and addition of acidic diluters on the catalyst performance was investigated. The Ni2P/SiO2 catalyst prepared using (NH4)2HPO4 and reduced at 600 °C provides the highest HMP yield, which reaches 98%. Although the presence of acid sites and a sufficient hydrogenating ability are important factors determining the pyrrolidone yield, the selectivity also depends on the specific features of EL adsorption on active catalytic sites.

Optimizing Hydrolysis Resistance and Dispersion Characteristics via Surface Modification of Aluminum Nitride Powder Coated with PVP-b-P(St-alt-ITA) Copolymer.

Developing new coating modification technology of aluminum nitride (AlN) powder for higher hydrolysis resistance is the key to prepare high-performance AlN ceramic substrate with water-based wet process in the future. In the this paper, The poly(vinyl pyrrolidone)-b-poly(Styrene/Itaconic anhydride) (PVP-b-P(St/ITA))block copolymer with PVP as the independent chain segment was designed and synthesized through reversible addition fragmentation chain transfer (RAFT) polymerization, which was used for the study on coating modification, hydrolysis resistance, and dispersion performance of AIN powder. The study results show that, when using PVP macromolecular chain transfer agent (PVP-CTA) for the RAFT chain extension and polymerization in St/ITA binary system, the molecular weight increases linearly and the molecular weight distribution tends to decrease with the monomer conversion rate, which is in line with the activity-controlled characteristics of RAFT polymerization. The copolymer PVP-b-P(St/ITA) was used to for surface modification treatment of submicron AlN powder to generate esterification reaction, which was absorbed and bound to the powder surface. Hydrolysis resistance and dispersion experiments were conducted for modified powder, and the crystal phase and micro structure of modified powder were analyzed and observed through XRD, SEM, and TEM. It was found that copolymer modification had no effect on the powder crystal phase. A 8-21 nm passivation layer was coated on the surface, which can exist stably for 10 h in 60 °C water. Zeta potential and laser particle analyzer tests showed that modified powder featured excellent water-based slurry dispersion performance, and certain self-dispersing characteristics. The highest Zeta potential appeared in pH 6~7, and the particle granularity was distributed uniformly with the median particle diameter of 875 nm. The powder hydrolysis resistance and dispersion performance are significantly improved.