Integrating multi-index determination coupled with hierarchical cluster analysis to evaluate the quality consistency of PVE30, an anti-HSV "glycoprotein" macromolecule of Prunellae Spica.

INTRODUCTION: Prunellae Spica (PS), derived from the dried fruit spikes of Prunella vulgaris L., is a traditional Chinese medicinal herb. Our previous studies found that PVE30, a water-extracting ethanol-precipitating "glycoprotein" macromolecule of PS, was a potential anti-herpes simplex virus (HSV) candidate. However, due to the complex structure and diverse bioactivity of the "glycoprotein", ensuring its quality consistency across different batches of PVE30 becomes particularly challenging. This poses a significant hurdle for new drug development based on PVE30. OBJECTIVE: Our study aimed to integrate multi-index determination coupled with hierarchical cluster analysis (HCA) to holistically profile the quality consistency of "glycoprotein" in PVE30. METHODS: High-performance gel permeation chromatography with refractive index detector (HPGPC-RID) was used to characterise the molecular weight (Mw) distribution, HPLC-PDA was used to quantitatively analyse the composed monosaccharides and amino acids, and UV-VIS was used to quantify the contents of polysaccharides and proteins. Qualitative and quantitative consistency was analysed for each single index in 16 batches of PVE30, and a 16 × 38 data matrix, coupled with HCA, was used to evaluate the holistic quality consistency of PVE30. RESULTS: The newly developed and validated methods were exclusive, linear, precise, accurate, and stable enough to quantify multi-indexes in PVE30. Single-index analysis revealed that 16 batches of PVE30 were qualitatively consistent in Mw distribution, polysaccharides and proteins, and the composition of composed monosaccharides and amino acids but quantitatively inconsistent in the relative contents of some "glycoprotein" macromolecules, as well as the composed monosaccharides/amino acids. HCA showed that the holistic quality of PVE30 was inconsistent, the inconsistency was uncorrelated with the regions where PS was commercially collected, and the contents of 17 amino acids and 2 monosaccharides contributed most to the holistic quality inconsistency. CONCLUSION: Multi-index determination coupled with HCA was successful in evaluating the quality consistency of PVE30, and the significant difference in quantitative indices was not caused by the origin of PS. The cultivating basis should be confirmed for PVE30-based new drug development.

Prediction of key quality attributes in Salvia miltiorrhiza standard decoction using a Gaussian process regression model.

INTRODUCTION: Nonstationary, nonlinear mass transfer in traditional Chinese medicine (TCM) extraction poses challenges to correlating process characteristics with quality parameters, particularly in defining clear parameter ranges for the process. OBJECTIVES: The aim of the study was to provide a solution for quality consistency analysis in TCM preparation processes. MATERIALS AND METHODS: Salvia miltiorrhiza was taken as an example for 15 batches of standard decoction. Using aqueous extract, alcoholic extract, and the content of salvianolic acid B as herb material key quality attributes, multiple nonlinear regression, Gaussian process regression, and artificial neural network models were employed to predict the key quality attributes including the paste yield, the content of salvianolic acid B, and the transfer rate. The evaluation criteria were root mean square error, mean absolute percentage error, and R2. RESULTS: The Gaussian process regression model had the best prediction effect on the paste yield, the content of salvianolic acid B, and the transfer rate, with R2 being 0.918, 0.934, and 0.919, respectively. Utilizing Gaussian process regression model confidence intervals, along with Shewhart control and intervals optimized through process capability index analysis, the quality control range of the standard decoction was determined as follows: paste yield, 25.14%-33.19%; salvianolic acid B content, 2.62%-4.78%; and transfer rate, 56.88%-64.80%. CONCLUSION: This study combined the preparation process of standard decoction with the Gaussian process regression model, accurately predicted the key quality attributes, and determined the quality parameter range by using process analysis tools, providing a new idea for the quality consistency standard of TCM processes.

Integrating chemical similarity and bioequivalence: an overall evaluation of the quality consistency of traditional decoction and dispensing granule decoction of Amomum villosum.

OBJECTIVE: This study aims to investigate the quality consistency between traditional decoction (TD) of Amomum villosum and its dispensing granule decoction (DGD). Fifteen batches of TD and nine batches of dispensing granules (manufactured by A, B, and C) were prepared and evaluated for their consistency. METHODS: Firstly, The chemical similarity of TD and DGD was examined using GC and HPLC, coupled with hierarchical cluster analysis (HCA), criteria importance though intercrieria correlation(CRITIC) weighting method, and principal component analysis (PCA). Secondly, the gastrointestinal motility experiments in mice, along with the CRITIC weighting method, were employed to assess the bioequivalence of TD and DGD of Amomum villosum. Finally, the entropy weight technique-gray relative analysis(GRA) method was used to compare the quality of Amomum villosum decoctions. RESULTS: ①The CRITIC weighting method indicated significantly higher scores for TD than DGD (p < 0.01). HCA and PCA results demonstrated a clear distinction between TD and DGD. ②Gastrointestinal motility test results revealed no significant difference between TD and DGD in other indicators (p > 0.05).③Gray relative analysis results showed that the relative correlation of TD was more significant than that of DGD. CONCLUSION: The chemical composition of DGD and TD differed. The biological activity of DGD-A/B was consistent with that of TD, while the difference between DGD-C and TD was significant. A comprehensive evaluation showed that TD exhibited better quality than DGD. DGD manufacturers should optimize the preparation process to enhance product quality.

Comprehensive Evaluation of the Quality of Tripterygium Glycosides Tablets Based on Multi-Component Quantification Combined with an In Vitro Biological Assay.

Tripterygium glycosides tablets (TGTs) are widely used in clinical practice to treat rheumatoid arthritis and other autoimmune diseases, with significant beneficial effects but also high toxicity, necessitating rigorous quality evaluation and control. In current study, a rapid resolution liquid chromatography tandem electrospray ionization triple quadrupole mass spectrometry (RRLC-ESI-MS/MS) method was developed and validated for the quantitative analysis of 14 components of ten batches of TGTs produced by different manufacturers, including four diterpenoids, three triterpenoids, and seven sesquiterpene alkaloids. Meanwhile, the NO inhibition effects of these TGTs were evaluated in LPS-induced RAW264.7 cells for their downstream anti-inflammatory activities, as well as their cytotoxicity. The results indicate that the TGTs from different manufacturers showed poor quality consistency, as evidenced by large variations in chemical profiles and biological effects, which may increase the risks associated with clinical use. To improve the quality status of TGTs, it is crucial to identify indicator components whose characterization can accurately reflect the efficacy and toxicity of TGTs from which they were derived. Our study reveals that triptolide, triptoquinone B, celastrol, and demethylzelaysteral considerably contributed to the anti-inflammatory activity and/or cytotoxicity of TGTs, implying that they should be further investigated as candidate indicator components for TGT quality control.

Implementation of Dynamic and Static Moisture Control in Fluidized Bed Granulation.

The application of process analysis and control is essential to enhance process understanding and ensure output material quality. The present study focuses on the stability of the feedback control system for a fluidized bed granulation process. Two strategies of dynamic moisture control (DMC) and static moisture control (SMC) were established based on the in-line moisture value obtained from the near-infrared sensor and control algorithm. The performance of these strategies on quality consistency control was examined using process moisture similarity analysis and principal component analysis. The stable moisture control performance and low batch-to-batch variability indicated that the DMC method was significantly better than other granulation methods. In addition, the investigation of robustness further showed that the implemented DMC method was able to produce predetermined target moisture values by varying process parameters. This study provides an advanced and simple control method for fluidized bed granulation quality assurance.

[Dissolution test and evaluation of Guizhi Fuling Capsules].

Because of the complex components, simple content determination can hardly reflect the overall quality of Guizhi Fuling Capsules. Therefore, it is necessary to carry out a multi-component dissolution test. The variability of quality among different batches of products from different manufacturers is a common problem of Chinese medicine solid preparations. To comprehensively control the quality of Guizhi Fuling Capsules, we studied the dissolution behaviors of 7 index components in the capsules under different conditions, and investigated the consistency of dissolution behaviors among different batches of products from the same manufacturer. The basket method of general rule 0931 in Chinese Pharmacopoeia was adopted, and the rotating speeds were set at 50, 75, and 100 r·min~(-1), respectively. The hydrochloric acid solution(pH 1.2), acetate buffer solution(pH 4.0), pure water, and phosphate buffer solution(pH 6.8) were used as the dissolution media. Automatic sampling was carried out at the time points of 5, 10, 20, 30, 45, and 60 min, respectively. The cumulative dissolution of 7 index components was measured through ultra-performance liquid chromatography(UPLC). The difference factor f_1 and similarity factor f_2 were calculated to comprehensively evaluate the similarity of the dissolution curves among 8 batches of Guizhi Fuling Capsules, and a variety of dissolution and release equations were fitted. The results showed that multiple components had faster dissolution rates at higher rotating speed and in hydrochloric acid medium. The 8 batches of Guizhi Fuling capsules showed the average f_1 value lower than 15 and the average f_2 value higher than 50, which indicated that different batches of products had similar dissolution behaviors. Most components had synchronous dissolution behaviors and similar release cha-racteristics. This study provides a reference for the quality consistency evaluation among batches, processing optimization, and dosage form improvement of Guizhi Fuling Capsules.

Establishment and validation of the quantitative analysis of multi-components by single marker for the quality control of Qishen Yiqi dripping pills by high-performance liquid chromatography with charged aerosol detection.

INTRODUCTION: Charged aerosol detection (CAD) has the merits of high sensitivity, high universality and response uniformity. The strategy that combines the quantitative analysis of multi-components by single marker (QAMS) with CAD has certain advantages for the quantification of multi-components. However, relevant research was limited. OBJECTIVES: To comprehensively investigate the crucial factors that affect the performance of the HPLC-CAD-QAMS approach and validate the credibility and feasibility of the method. METHODOLOGY: Multiple components of Qishen Yiqi dripping pills (QSYQ) were assayed using the high-performance liquid chromatography (HPLC)-CAD-QAMS approach. Some factors that affect the sensitivity and accuracy of the approach were sufficiently studied. After the method verification, principal component analysis (PCA) was applied to evaluate the quality consistency of three types of samples: normal samples, expired samples and negative samples. RESULTS: A HPLC-CAD-QAMS method was successfully developed for the multi-component determination of QSYQ. First, chromatographic conditions were optimised by a definitive screening design, and the optimised ranges of operating parameters were obtained with a Monte Carlo simulation method. Next, a new method to select the internal reference standards was successfully introduced based on the heatmap of Pearson correlation coefficients of the response factors. Then, the multi-point method was selected to calculate the relative correction factors, and a robustness test was conducted with Plackett-Burman design. Finally, the PCA was proved to be effective for the quality consistency evaluation of different samples. CONCLUSION: The developed HPLC-CAD-QAMS method can be a reliable and superior means for the multi-component quantitative analysis of QSYQ.

Quality consistency evaluation of commercial transfer factor injections by chromatographic fingerprint combined with multivariate statistical analysis.

The current quality control methods relying mainly on chromogenic reaction can hardly ensure the quality and safety of the biochemical drug with complex chemical composition. Therefore, a chromatographic fingerprint method was developed for the quality evaluation of a multicomponent biochemical drug, transfer factor injection. High-performance liquid chromatography fingerprint was measured by using a C18 column (250 × 4.6 mm, 5 µm) with a mobile phase composed of 0.1% trifluoroacetic acid-water and 0.085% trifluoroacetic acid-acetonitrile under gradient elution. The developed method was validated and was subsequently applied to 57 batches of commercial products which were sampled by National Drug Assessment Program. High-resolution mass spectrometry analysis was performed on characteristic peaks of fingerprints, and a series of amino acids, nucleosides, and deoxynucleosides were identified. In the fingerprint assessments, principal component analysis and Hotelling T2 analysis yielded the best results. The results generally indicated that there was a significant difference among products of batch-to-batch or from different manufacturers. Abnormal samples and its discriminatory components were also explored. In summary, the established fingerprinting method with multivariate statistical analysis could offer an efficient, reliable, and practical approach for quality consistency evaluation of transfer factor injection, providing a reference for the quality control of other multicomponent biochemical drugs.

Assessment of quality consistency in traditional Chinese medicine using multi-wavelength fusion profiling by integrated quantitative fingerprint method: Niuhuang Jiedu pill as an example.

Under the wave of the revival of traditional Chinese medicine, there is a quite imperative duty to study an integrated and comprehensive method of fingerprint data processing and analysis on the quality consistency of traditional Chinese medicine. So, we proposed six parameters from two aspects (qualitative and quantitative), three levels (biased to strong peaks, biased to weak peaks, no obvious bias), to comprehensively evaluate the similarity of the two fingerprints. On this basis, another five parameters were proposed to evaluate the integrated effects (consistency, volatility, and similarity). This method was applied to 22 batches of Niuhuang Jiedu pill samples. Next, a practical and convenient multi-wavelength fusion method was designed to provide more information, and the generated fusion profilings were used for subsequent evaluation. The characteristics of the parameters were confirmed by correlation analysis. The results of both hierarchical clustering analysis and principal component analysis for raw data and standardized data were consistent with integrated quantitative fingerprint method results. At the same time, this method gave a reasonable explanation for abnormal and dissimilar samples. This work illustrated that the proposed method was particularly suitable for similarity analysis of fingerprints and capable of ensuring the quality consistency in traditional Chinese medicine.

Chemical profiling by LC-MS/MS and HPLC fingerprint combined with chemometrics and simultaneous determination of 16 characteristic ingredients for the quality consistency evaluation of Shaoyao-Gancao Decoction.

In this paper, to evaluate the effect of the region of origin on the quality consistency of Shaoyao-Gancao Decoction (SGD), the SGD fingerprint was developed for the first time. Chemometric methods including similarity analysis, hierarchical clustering analysis and principal component analysis were employed to study the quality consistency of SGD. Meanwhile, high-performance liquid chromatography coupled with electrospray ionization quadrupole time-of-flight mass spectrometry was applied for comprehensive analysis of SGD and 93 compounds were tentatively characterized. Furthermore, a high-performance liquid chromatography method with multi-wavelength switching for simultaneous determination of 16 characteristic ingredients comprising gallic acid, oxypaeniflorin, albiflorin, paeoniflorin, liquiritin apioside, liquiritin, isoliquiritin apioside, galloylpaeoniflorin, 1,2,3,4,6-penta-O-galloyl-d-galactopyranose (PGG), ononin, isoliquiritin, liquiritigenin, benzoylpaeoniflorin, glycyrrhizic acid, isoliquiritigenin and formononetin, was established. All 16 analytes show excellent linearity (R2 ≥ 0.9990) with recoveries ranging from 96.58 to 104.61% and limits of detection and quantification of 0.022-0.291 and 0.037-0.635 µg/mL, respectively. Finally, it was successfully applied to determine 15 batches of SGD. The results of our research indicate that different regions of origin have a significant effect on the quality consistency of SGD, and its fingerprint combined with chemometrics and multi-ingredient determination comprise an efficient and reliable approach for quality consistency evaluation.

[Overview and prospects of traditional Chinese medicine blending technology oriented by quality consistency].

The consistency of drug quality is related to the clinical efficacy and safety,which is highly valued by the government and relevant industries. Compared with chemical medicine,traditional Chinese medicine originates from the nature,and is greatly influenced by natural factors,such as the place of origin,cultivation and processing technology,climate. The quality consistency of traditional Chinese medicine is poor. The quality consistency has become the pain point and difficulty of the development of the traditional Chinese medicine industry,which seriously affects the stability and controllability of clinical efficacy and the reproducibility or recognition of modern research results. It is also a bottleneck for Chinese patent medicine to enter the international market. Mixed batch blending technology is an effective method for the scientific guarantee of the quality consistency in other industries and disciplines,and widely applied in liquor making industry,tobacco industry and perfume industry. Overseas,mixed batch blending technology has been successfully applied in guaranteeing the quality consistency of Ginkgo biloba preparations Jinnado. It has been used in the production of Chinese formulations in Japan for more than 30 years. In recent years,mixed batch blending technology has been introduced into the pharmaceutical field to ensure the quality consistency of traditional Chinese medicine,and relevant research has gradually increased.This manuscript reviews the application of blending technology in other disciplines,summarizes the algorithm principles and software systems of mixed batch blending in traditional Chinese medicine or natural medicine,explains the specific implementation process of mixed batch blending technology,and looks forward to the application prospects of artificial intelligence and other new technologies,in the hope of providing new ideas and technologies for breaking through the problem of quality consistency,and boosting the high-quality and high-level development of Chinese medicine industry in the new era.

Production process reproducibility and product quality consistency of transient gene expression in HEK293 cells with anti-PD1 antibody as the model protein.

Demonstration of reproducibility and consistency of process and product quality is one of the most crucial issues in using transient gene expression (TGE) technology for biopharmaceutical development. In this study, we challenged the production consistency of TGE by expressing nine batches of recombinant IgG antibody in human embryonic kidney 293 cells to evaluate reproducibility including viable cell density, viability, apoptotic status, and antibody yield in cell culture supernatant. Product quality including isoelectric point, binding affinity, secondary structure, and thermal stability was assessed as well. In addition, major glycan forms of antibody from different batches of production were compared to demonstrate glycosylation consistency. Glycan compositions of the antibody harvested at different time periods were also measured to illustrate N-glycan distribution over the culture time. From the results, it has been demonstrated that different TGE batches are reproducible from lot to lot in overall cell growth, product yield, and product qualities including isoelectric point, binding affinity, secondary structure, and thermal stability. Furthermore, major N-glycan compositions are consistent among different TGE batches and conserved during cell culture time.

Novel strategy for quality consistency evaluation of Chinese medicine "YIQING" tablet that combines the simultaneous quantification and screening of ten bioactive constituents.

The UV characteristics for different categories compounds in complex traditional Chinese medicines and herbal preparations usually vary. Thus, to achieve the integral analysis of multiwavelength fingerprint characteristics, we introduced a novel strategy of multiwavelength total fusion profiling. The simultaneous separation and quantification of multiple components by reversed-phase high-performance liquid chromatography coupled with diode array detection was developed in an effective, accurate, and reliable way. Furthermore, a 2,2-diphenyl-1-picrylhydrazyl radical (DPPH) scavenging assay was set up to detect and screen the bioactivity of similar-structure constituents (aloe-emodin, rhein, emodin, chrysophanol, baicalein, wogonin, baicalin, wogonoside, berberine hydrochloride, and jatrorrhizine hydrochloride). Moreover, the high-performance liquid chromatography DPPH assay was developed to monitor the relationship between the biological activity and the spatial structure, the number of hydroxyl groups, the concentration of the analytes in samples. The result of qualitative classification for 15 batches of "YIQING" tablets using principle component analysis was consistent with the quantitative fingerprint assessment using the average linear quantitative fingerprint method. Therefore, chemometrics, multiwavelength total fusion profiling in conjunction with average linear quantitative fingerprint method and antioxidant activity can control the quality of traditional Chinese medicines/herbal preparations comprehensively and practically.

[Application of quality by design in granulation process for ginkgo leaf tablet (⠣)： influence and control of raw materials' quality variation].

Raw materials' quality variation could affect the quality consistency of product and the clinical efficacy. In this paper, the high shear wet granulation (HSWG) process of the ginkgo leaf tablet was taken as the research object. Ginkgo biloba extracts and excipients microcrystalline cellulose collected from various sources and batches were used to simulate raw materials' quality variation. Real-time torque was recorded to analyze the viscosity of the wetting mass, and then by combining with physical fingerprint, the impact of physical quality variation of powders on granule properties could be investigated. Based on regime map thesis, whether the granules' nucleation mode was in mechanical dispersion regime was determined by calculating dimensionless parameters, which would lead to the unstable output in considerations of granule yield ratio and particle size distribution (PSD) curve. The orthogonal partial least square (OPLS) model was adopted to build the relationship between the micromeritic properties and the mediangranule size (D50) of Ginkgo biloba granules and then the critical material attributes (CMAs) were screened by variable importance in the projection (VIP) indexes. The results demonstrated that the properties of powders including hygroscopicity, angle of repose, Hausner ratio, Carr index, D10 and loss on drying affected the granule size. Besides, Ginkgo biloba granules were compressed into tablets. In view of tensile strength analysis, the raw materials' quality variation did not result in decrease of tensile strength of the ginkgo leaf tablets. The design space of critical quality attributes (CQAs) and the process design space which could cope with raw materials' quality variation were proved to be robust..

[Which one is more important, raw materials or productive technology?--a case study for quality consistency control of Gegen Qinlian decoction].

To investigate the effect of Chinese medicine raw materials and production technology on quality consistency of Chinese patent medicines with Gegen Qinlian decoction as an example, and establish a suitable method for the quality consistency control of Chinese patent medicines. The results showed that the effect of production technology on the quality consistency was generally not more than 5%, while the effect of raw materials was even more than 30%, indicating that the effect of raw materials was much greater than that of the production technology. In this study, blend technology was used to improve the quality consistency of raw materials. As a result, the difference between the product produced by raw materials and reference groups was less than 5%, thus increasing the quality consistence of finished products. The results showed that under the current circumstances, the main factor affecting the quality consistency of Chinese patent medicines was raw materials, so we shall pay more attention to the quality of Chinese medicine's raw materials. Finally, a blend technology can improve the quality consistency of Chinese patent medicines.

[Physical fingerprint for quality control of traditional Chinese medicine extract powders].

The physical properties of both raw materials and excipients are closely correlated with the quality of traditional Chinese medicine preparations in oral solid dosage forms. In this paper, based on the concept of the chemical fingerprint for quality control of traditional Chinese medicine products, the method of physical fingerprint for quality evaluation of traditional Chinese medicine extract powders was proposed. This novel physical fingerprint was built by the radar map, and consisted of five primary indexes (i.e. stackablity, homogeneity, flowability, compressibility and stability) and 12 secondary indexes (i.e. bulk density, tap density, particle size<50 µm percentage, relative homogeneity index, hausner ratio, angle of repose, powder flow time, inter-particle porosity, Carr index, cohesion index, loss on drying, hygroscopicity). Panax notoginseng saponins (PNS) extract was taken for an example. This paper introduced the application of physical fingerprint in the evaluation of source-to-source and batch-to-batch quality consistence of PNS extract powders. Moreover, the physical fingerprint of PNS was built by calculating the index of parameters, the index of parametric profile and the index of good compressibility, in order to successfully predict the compressibility of the PNS extract powder and relevant formulations containing PNS extract powder and conventional pharmaceutical excipients. The results demonstrated that the proposed method could not only provide new insights into the development and process control of traditional Chinese medicine solid dosage forms.

Root Cause Analysis of Quality Defects Using HPLC-MS Fingerprint Knowledgebase for Batch-to-batch Quality Control of Herbal Drugs.

INTRODUCTION: The batch-to-batch quality consistency of herbal drugs has always been an important issue. OBJECTIVES: To propose a methodology for batch-to-batch quality control based on HPLC-MS fingerprints and process knowledgebase. METHODS: The extraction process of Compound E-jiao Oral Liquid was taken as a case study. After establishing the HPLC-MS fingerprint analysis method, the fingerprints of the extract solutions produced under normal and abnormal operation conditions were obtained. Multivariate statistical models were built for fault detection and a discriminant analysis model was built using the probabilistic discriminant partial-least-squares method for fault diagnosis. RESULTS: Based on multivariate statistical analysis, process knowledge was acquired and the cause-effect relationship between process deviations and quality defects was revealed. The quality defects were detected successfully by multivariate statistical control charts and the type of process deviations were diagnosed correctly by discriminant analysis. CONCLUSION: This work has demonstrated the benefits of combining HPLC-MS fingerprints, process knowledge and multivariate analysis for the quality control of herbal drugs.

Establishing an integrated, four-dimensional quality assessment system for traditional Chinese medicine: A case study of Shuanghuanglian oral liquid.

The quality of traditional Chinese medicine (TCM) is the premise to ensure its safety and effectiveness in clinical application. In this study, a complete quality control system for four-dimensional fingerprinting of TCM was innovatively constructed based on multiple detection techniques, and the quality of Shuanghuanglian oral liquid (SHL) was evaluated. Electrochemical fingerprinting (ECFP) as an emerging method without pretreatment provides rich and quantifiable information for SHL samples. The first quantitative ECFP of SHL was developed by the B-Z oscillation system. Eight characteristic parameters were analyzed and a good linear relationship was found between the oscillation lifetime and sample volume, by which the calculated values of the added sample volume (VL) showed different fluctuations between samples. What is more, high-performance liquid chromatography five-wavelength fusion fingerprint (HPLC-FWFP), GC fingerprint (GC-FP), and UV quantum fingerprint (UV-QFP) was established. Meanwhile, the purity of the peaks of the HPLC-FWFP was verified by the dual-wavelength absorption coefficient ratio spectrum (DWAR). Equal weighted ratio quantitative fingerprinting method (EWRQFM) was successfully proposed to extract all potential features for the overall quality assessment of the samples. Finally, a comprehensive evaluation strategy was proposed, namely the variation coefficient weighting algorithm (VCWA). The results of qualitative and quantitative evaluation of HPLC-FWFP, GC-FP, electrochemical quantum fingerprints (EC-QFP), and UV-QFP were integrated by this method. The established evaluation system is also a suitable strategy to control the quality of other TCM preparations.

Quality Consistency Evaluation of Traditional Chinese Medicines: Current Status and Future Perspectives.

Quality consistency evaluation of traditional Chinese medicines (TCMs) is a crucial factor that determines the safe and effective application in clinical settings. However, TCMs exhibit diverse, heterogeneous, complex, and flexible chemical compositions, as well as variability in preparation processes. These characteristics pose greater challenges in researching the consistency of TCMs compared to chemically synthesized and biological drugs. Therefore, it is paramount to develop effective strategies for evaluating the quality consistency of TCMs. From the starting point of quality properties, this review explores the strategy used to evaluate quality consistency in terms of chemistry-based strategy (chemical consistency) and the biology-based strategy (bioequivalence). Among them, the chemistry-based strategy is the mainstream, and biology-based strategy complements the chemistry-based strategy each other. Furthermore, the emerging chemistry-biology strategies (overall evaluation) is discussed, including individually combining strategy and integration strategy. Finally, this review provides insights into the challenges and future perspectives in this field. By highlighting current status and trends in TCMs quality consistency, this review aims to contribute to establishment of generally applicable chemistry-biology integrated evaluation strategy for TCMs. This will facilitate the advancement toward a higher stage of overall quality evaluation.

Comprehensive multicomponent characterization and quality assessment of Xiaoyao Wan by UPLC-Q-Orbitrap-MS, HS-SPME-GC-MS and HS-GC-IMS.

Xiaoyao Wan (XYW) is a prescription medicine of traditional Chinese medicine (TCM) with the effects of "soothing the liver and relieving depression," and "strengthening spleen and nourishing blood". XYW has been widely concerned in the treatment of depression and has become one of the commonly used classic formulas in clinical practice. However, the pharmacodynamic substance basis and the quality control studies of XYW are hitherto quite limited. Here, we aim to fully utilize an advanced ultra - performance liquid chromatography-quadrupole - Orbitrap mass spectrometry (UPLC-Q-Orbitrap-MS), headspace-solid phase microextraction-gas chromatography-mass spectrometry (HS-SPME-GC-MS) and headspace-gas chromatography-ion mobility spectrometry (HS-GC-IMS) technique to deep characterization of the pharmacological substance basis and quantitatively evaluate the quality of XYW. Firstly, 299 compounds were identified or tentatively characterized, including 198 non-volatile organic compounds (n-VOCs) and 101 volatile organic compounds (VOCs). Secondly, principal component analysis (PCA) and hierarchical cluster analysis (HCA) was used to analyze quality differences in XYW at different manufacturers. Thirdly, a parallel reaction monitoring (PRM) method was established and validated to quantify the fourteen major effective substances in different manufacturers of XYW, which were chosen as the benchmarked substances to evaluate the quality of XYW. In conclusion, this study shows that the strategy provides a useful method for quality control of TCM and offers a practical workflow for exploring the quality consistency of TCM.