Effect of various surface coating methods on surface roughness, micromorphological analysis and fluoride release from contemporary glass ionomer restorations.

OBJECTIVE: To evaluate the effect of various surface coating methods on surface roughness, micromorphological analysis and fluoride release from contemporary resin-modified and conventional glass ionomer restorations. MATERIALS & METHODS: A total of 72 permanent human molars were used in this study. The teeth were randomly assigned into 2 groups according to type of restorative materials used; resin modified glass ionomer cement and conventional glass ionomer (SDI Limited. Bayswater Victoria, Australia). Each group was subdivided into 3 subgroups according to the application of coat material; Sub-group1: without application of coat; Sub-group2: manufacturer recommended coat was applied and sub-group3: customized (vaseline) coat was applied. Each group was then subdivided into two divisions according to the time of testing; immediate (after 24 h) and delayed (after 6 months of storage). Three specimens from each sub-group were selected for surface roughness test (AFM) and another 3 specimens for the micromorphological analysis using scanning electron microscope (SEM). For the fluoride release test, a total of 60 cylindrical discs were used (n = 60). The discs were randomly split into 2 groups according to type of restorative materials used (n = 30); resin modified glass ionomer cement and conventional glass ionomer. Each group was subdivided into 3 subgroups (n = 10) according to the application of the coat material; Sub-group1: without application of coat; Sub-group2: with the manufacturer recommended coat and sub-group3: with application of customized (vaseline) coat. Data for each test was then collected, tabulated, were collected, tabulated, and tested for the normality with Shapiro-Wilk test. Based on the outcome of normality test, the significant effects of variables were assessed using appropriate statistical analysis testing methods. RESULTS: Regarding the data obtained from surface roughness test, Shapiro-Wilk test showed normal distribution pattern of all values (p > 0.05). Accordingly, Two-way ANOVA outcome showed that the 'type of restoration' or 'test time' had statistically significant effect on the AFM test (p < 0.05). Regarding Fluoride specific ion electrode test 2-way ANOVA followed by Least Significant Difference (LSD) Post-hoc test revealed significant difference among the groups (p < 0.05). It showed that SDI GIC group after 14 days of measurement had the highest mean of fluoride release (36.38 ± 3.16 PPM) and SDI RMGIC after 30 days of measurement had the second highest mean of fluoride release (43.28 ± 1.89 PPM). Finally, regarding the micromorphological analysis using SEM, a slight difference was observed between the studied groups. CONCLUSIONS: Based on the results of this study, various coatings enhance surface roughness in the initial 24 h of restoration insertion. Different coat types seems that have no influence on fluoride release and the micromorphological features of the restoration/dentin interface.

Comparative Evaluation of Shear Bond Strength of Resin-modified Glass Ionomer Cement with ProRoot MTA and MTA Angelus.

AIM: The aim of the present study was to evaluate the shear bond strength of resin-modified glass ionomer cement with two different types of mineral trioxide aggregate at different time intervals. MATERIALS AND METHODS: A total of 80 cylindrical blocks were prepared using a self-cure acrylic resin with a central cavity of 4 mm internal diameter and 2 mm height. The prepared samples were randomly divided into two groups (n = 40 each) according to the type of MTA cements used (ProRoot MTA and MTA Angelus). Two groups were further sub-divided into four sub-groups of 10 samples each according to the different time intervals. ProRoot MTA and MTA Angelus were placed in the prepared cavity and a wet cotton pellet was placed over the filled cavity. A hollow plastic tube was placed over the MTA surface and resin-modified glass ionomer cement (RMGIC) was placed into the hollow plastic tube and light-cured (Spectrum 800, Dentsply Caulk Milford, DE, USA) according to the time intervals decided. After light curing the plastic tubes were removed carefully and the specimens were stored at 37°C and 100% humidity for 24 hours to encourage setting of MTA. The specimens were mounted in a universal testing machine (ADMET) and a crosshead speed of 0.5 mm/min was applied to each specimen by using a knife-edge blade until the bond between the MTA and RMGIC failed. The data were statistically analyzed using ANOVA, post hoc Tukey's t-test and Fisher's t-test and p-value ≤ 0.5 was considered significant. RESULTS: For both ProRoot MTA and MTA Angelus there was no statistically significant difference between 45 minutes and 24 hours (p-value ≥ 0.8). For ProRoot MTA, shear bond strength value at 10 minutes were significantly lower than 45 minutes and 24 hours group. However, for MTA Angelus, shear bond strength value at 10 minute was not significantly different from 45 minutes group (p-value ≥ 0.3). For both ProRoot MTA and MTA Angelus shear bond strength value at 0 minute were the least and were significantly lower than 10 minutes, 45 minutes, and 24 hours, respectively (p-value ≥ 0.000). CONCLUSION: Resin-modified glass ionomer cement can be layered over MTA Angelus after it is allowed to set for 10 minutes. However, ProRoot MTA should be allowed to set for at least 45 minutes before the placement of RMGIC to achieve better shear bond strength. CLINICAL SIGNIFICANCE: Due to the variety of types of mineral trioxide aggregate cements available in dentistry, it is justifiable to emphasize on different time intervals as it may affect the shear bond strength of restorative cements. Such information is pivotal for the clinicians while using mineral aggregate-based cements that receive forces from the condensation of restorative materials or occlusion, as the compressive strength may be affected due to different time intervals. How to cite this article: Tyagi N, Chaman C, Anand S, et al. Comparative Evaluation of Shear Bond Strength of Resin-modified Glass Ionomer Cement with ProRoot MTA and MTA Angelus. J Contemp Dent Pract 2024;25(1):35-40.

Three-Dimensional Assessment of Radiographic Changes after Indirect Pulp Capping Using Silver Diamine Fluoride with or without Potassium Iodide in Young Permanent Teeth (12-Month RCT).

The aim of this study was to conduct a three-dimensional (3D) evaluation of radiographic changes after indirect pulp capping (IPC) with silver diamine fluoride (SDF) with or without potassium iodide (KI) and resin-modified glass ionomer cement (RMGIC) in deep carious young permanent molars using cone-beam computed tomography (CBCT). 108 first permanent molars with deep occlusal cavitated caries lesions, in forty-nine 6- to 9-year-old children, were randomly allocated to one of 3 groups (n = 36) and treated with SDF+KI, SDF, and RMGIC as IPC materials. CBCT scans were taken at 0 and 12 months to assess tertiary dentin formation (volume and grey level intensity), increase in root length, and pathological changes such as secondary caries, periapical radiolucency, internal resorption, and obliteration of the pulp. The 3D image analysis procedures were performed using ITK-SNAP and 3D Slicer CMF. Comparisons were made using analysis of variance with a fixed effect for treatment and random effects for patient and patient-by-treatment to account for within-patient correlations. A two-sided 5% significance level was used. There were no significant differences among the three groups regarding tertiary dentin volume (p = 0.712) and grey level intensity (p = 0.660), increase in root length (p = 0.365), prevention of secondary caries (p = 0.63), and periapical radiolucency (p = 0.80) in the analysed 69 CBCT scans. The study did not find differences among the groups regarding quality and quantity of tertiary dentin formed, increase in root length, absence of secondary caries, and other signs of failure as shown by CBCT. Clinical Significance: The results show no significant differences in radiographic outcomes (quality and quantity of tertiary dentin formed, increase in root length, absence of secondary caries, and other signs of failure) when using SDF+KI, SDF, and RMGIC in IPC. The results of this study can help guide treatment decision-making regarding use of SDF and SDF+KI as IPC materials in deep cavitated lesions.

Assessment of Mechanical/Chemical Properties and Cytotoxicity of Resin-Modified Glass Ionomer Cements Containing Sr/F-Bioactive Glass Nanoparticles and Methacrylate Functionalized Polyacids.

This study prepared low-toxicity, elemental-releasing resin-modified glass ionomer cements (RMGICs). The effect of 2-hydroxyethyl methacrylate (HEMA, 0 or 5 wt%) and Sr/F-bioactive glass nanoparticles (Sr/F-BGNPs, 5 or 10 wt%) on chemical/mechanical properties and cytotoxicity were examined. Commercial RMGIC (Vitrebond, VB) and calcium silicate cement (Theracal LC, TC) were used as comparisons. Adding HEMA and increasing Sr/F-BGNPs concentration decreased monomer conversion and enhanced elemental release but without significant effect on cytotoxicity. Rising Sr/F-BGNPs reduced the strength of the materials. The degree of monomer conversion of VB (96%) was much higher than that of the experimental RMGICs (21-51%) and TC (28%). The highest biaxial flexural strength of experimental materials (31 MPa) was significantly lower than VB (46 MPa) (p < 0.01) but higher than TC (24 MPa). The RMGICs with 5 wt% HEMA showed higher cumulative fluoride release (137 ppm) than VB (88 ppm) (p < 0.01). Unlike VB, all experimental RMGICs showed Ca, P, and Sr release. Cell viability in the presence of extracts from experimental RMGICs (89-98%) and TC (93%) was significantly higher than for VB (4%). Experimental RMGICs showed desirable physical/mechanical properties with lower toxicity than the commercial material.

Evaluation of New Alkasite Based Restorative Material for Restoring Non- Carious Cervical Lesions- Randomized Controlled Clinical Trial.

Two different restoration materials, an alkasite-based resin composite and a resinmodified glass ionomer cement were used to assess restoration of non-carious cervical dental lesions. This split mouth randomized controlled trial included 40 patients. After randomization both sides of the dental arch were restored with either an alkasite-based (Cention N, Ivoclar Vivadent) or a resin-modified glass ionomer cement (Voco GmbH) restoration. The placed fillings were evaluated by blinded additional operators 1, 6 months and 1 year after to the USPHS criteria (retention, marginal integrity and discoloration, anatomical form and secondary caries). Data were analyzed using Kendall's Coefficient of Concordance test and Chi-square tests using SPSS software (SPSS Inc., Version 20) (P=0.05). As for retention and anatomic form both materials performed similar after one month. However, the retention and anatomic form for alkasite based restorative Cention showed significantly better results after 6 months (p=0.013/p=0.003) and one year (p=0.026/p=0.008). The resin modified glass ionomer restoration showed higher discoloration after 6 months (p=0.025) and one year (p=0.018), while Cention performed better regarding marginal integrity at all time intervals. No secondary caries occurred. Alkasite based restorative materials displayed superior technical, mechanical and aesthetical performance in a follow-up period of one year and can therefore be recommended as an alternative to resin-modified glass ionomer cements.

The effects of gastric acid on pediatric restorative materials: SEM analysis.

In this study, we aimed to demonstrate changes in the surface roughness and microhardness of three different restorative materials routinely used in pediatric dentistry (composite, compomer and resin-modified glass ionomer cement (RMCIS)) in response to continuous daily exposure to gastric acid. Twelve samples of each of type of restorative material were prepared. Eleven of the specimens were included in the gastric acid cycle. The microhardness and surface roughness of ten samples were measured before and after the cycle. Another sample included in the cycle was compared with the sample not included in the cycle by scanning electron microscopy (SEM). There was a significant difference between the groups in terms of roughness scores following gastric acid cycle (p = 0.039). RMCIS material possessed the highest roughness value. A significant difference was identified in terms of microhardness levels before and after the gastric acid cycle (p = 0.001). The most significant change was observed in the compomer material. SEM analysis, performed after the gastric acid cycle, revealed that most cracks were identified in RMCIS material; this was followed by compomer and composite materials, respectively. Our analysis indicates that the restorative materials used frequently in pediatric dental procedures, show increased surface roughness and reduced microhardness when exposed to gastric acid.

Effect of enamel-surface modifications on shear bond strength using different adhesive materials.

BACKGROUND: This study aimed to investigate the effect of enamel-surface modifications on the shear bond strength between ceramic brackets bonded using different adhesive materials and the enamel surface and to identify the most suitable clinical adhesive and bonding method. Whether the non-acid-etching treatment met the clinical bond strength was also determined. METHODS: A total of 108 extracted premolars were divided into nine groups (n = 12) based on the different enamel-surface modification techniques (acid etching, deproteinization, and wetting). Group 1 was bonded with Transbond™ XT adhesive, whereas groups 2-9 were bonded with resin-modified glass ionomer cement (RMGIC). The treatment methods for each group were as follows: groups 1 and 2, acid etching; group 3, acid etching and wetting; group 4, acid etching and deproteinization; group 5, acid etching, deproteinization, and wetting; group 6, deproteinization; group 7, deproteinization and wetting; group 8, without treatment; and group 9, wetting. The samples' shear bond strength was measured using an universal testing machine. Adhesive remnant index (ARI) was examined using a stereomicroscope. The enamel-surface morphology was observed with a scanning electron microscope. One-way ANOVA with Tukey's post-hoc test and chi-square test were used for statistical analysis, and p < 0.05 and α = 0.05 were considered statistically significant. RESULTS: The ARIs of groups 1-5 and 6-9 were statistically significant (p = 0.000). The enamel surface of groups 1-5 was demineralized, and only a tiny amount of protein remained in groups 7 and 8, whereas a thick layer of protein remained in groups 8 and 9. CONCLUSIONS: RMGIC adhesive did not damage the enamel surface and achieved the required clinical bond strength. The enamel surface was better treated with 5.25% sodium hypochlorite preferably under non-acid-etching conditions.

Er:YAG laser removal of zirconia crowns on titanium abutment of dental implants: an in vitro study.

BACKGROUND: This research aimed to explore feasibility and the time required when erbium-doped yttrium aluminum garnet (Er:YAG) laser as a non-invasive treatment modality to retrieve different thicknesses of zirconia material bonded by two dental cements from titanium implant abutments. METHODS: Prepared 80 titanium blocks (length: 20 mm, width: 10 mm, height: 10 mm) and square zirconia sheets (length: 10 mm) with different thicknesses (1 mm, 2 mm, 3 mm, and 4 mm) were 20 pieces each. Resin modified glass ionomer cement (RelyX Luting 2; RXL) and resin cement (Clearfil SA luting; CSL) were used to bond zirconia sheet and titanium block. Specimens were kept in 100% humidity for 48 h. Er:YAG laser was used to retrieve the zirconia sheet and recorded the time. Universal testing machine was used to measure the residual adhesion of the samples that did not retrieve after 5 min of laser irradiation. Shear bond strength (MPa) and the time data (s) were analyzed using Kruskal-Wallis Test. The bonding surface and the irradiation surface of the zirconia sheet was examined with the scanning electron microscopy (SEM). RESULTS: Within 5 min of laser irradiation, RXL group: 1 mm group all fell off, 2 mm group had 3 specimens did not fall off, there was no statistical difference in the average time between the two groups; CSL group: half of the 1 mm group fell off. Shear bond strength test results: there was no statistical difference between 1 and 2 mm in RXL group and 1 mm in CSL group, there was no statistical difference between 3 mm in RXL group and 2 mm in CSL group, and there were significant differences statistically in comparison between any two groups in the rest. SEM inspection showed that the bonding surface and the irradiation surface of the zirconia sheet had changes. CONCLUSION: In this vitro study, the following could be concluded: it is faster to remove zirconia crowns with thickness less than 2 mm from titanium abutment when luted with RelyX Luting 2 compared to Clearfil SA luting.

Comparison of 3- and 90-day bond strengths of 3 types of cement to nickel-chromium alloy.

The purpose of this in vitro study was to compare the 3- and 90-day bond strengths of 3 cements used for luting metal-ceramic crowns. Zinc phosphate cement (ZPC; SS White), resin-modified glass ionomer cement (RMGIC; Fuji Plus), and self-adhesive resin cement (SARC; RelyX U200) were assessed in 2 different treatment conditions (with and without microsandblasting of the alloy) and at 2 experimental times (3 days [E1] and 90 days [E2] after cementation). The buccal surfaces of 84 bovine teeth were ground until the dentin was exposed, and 84 nickel-chromium alloy plates cast from a resin model were cemented to the dentin surfaces with 1 of the 3 cements (n = 28). In half of the specimens of each group (n = 14), the bonding surfaces of the nickel-chromium plates received 6 seconds of microsandblasting with 45-µm aluminum oxide particles prior to cementation. The compressive shear bond strengths of the specimens were evaluated in a universal testing machine at E1 and E2 (n = 7). The SARC group showed the greatest bond strength, followed by the RMGIC group, while the bond strength of the ZPC group was significantly lower (P < 0.01). For the RMGIC specimens subjected to microsandblasting, there was a statistically significant difference between the mean bond strengths at E1 and E2 (P = 0.040). All of the other cement and treatment groups showed statistically similar adhesion results at E1 and E2 (P > 0.05). The complementary test by Sidák revealed that the cements Fuji Plus and RelyX U200 showed higher values at E2 and were statistically similar to each other (P > 0.05). Although RMGIC specimens showed a lower initial bond strength than SARC specimens, the fact that the microsandblasted RMGIC subgroup was the only one that demonstrated a significant increase in bond strength with aging suggests that RMGIC can be a material of first choice because it also costs less than SARC.

The Impact of Simulated Gastric Acid and Toothbrushing on Surface Characteristics of Resin-Modified Glass-Ionomer Cements.

Background and Objectives: The aim of this in vitro study was to evaluate the effect of simulated gastric acid associated with toothbrushing on the surface condition of three resin-modified glass-ionomer cements (RMGIC). Materials and Methods: One hundred and sixty samples of each material were obtained and included in three study groups according to the tested material: Group I (Ionolux, VOCO GmbH, Cuxhaven, Germany); Group II (Vitremer, 3 M-ESPE, St. Paul, MN, USA); and Group III (Fuji II LC, GC Corporation, Tokyo, Japan). The samples were submersed in hydrochloric acid 0.01 M (pH 3.8) for 3 h and exposed to a toothbrushing procedure at a frequency of 10,000 cycles with medium and hard bristles immediately or 30 min after the acid attack. Profilometric measurements were performed by using a non-contact profilometer (Dektak XT, Bruker, Billerica, MA, USA) in order to assess the surface roughness. ANOVA and Bonferroni post hoc tests were used for the statistical analysis at a significance level of p < 0.05. Results: Exposure of RMGICs to the erosive effect of hydrochloric acid in association with toothbrushing 30 min after the chemical attack increased the surface roughness of all three RMGICs. Exposure of the three tested materials exclusively to the action of hydrochloric acid did not affect the surface roughness. Conclusions: One year of hydrochloric acid challenge associated with one year of toothbrushing with medium-hardness bristles performed 30 min after the acid attack increase the surface roughness of two of the three types of RMGIC tested (Ionolux and Fuji II LC).

Comparative Analysis of Biodentine, Calcium Hydroxide, and 2% Chlorhexidine with Resin-modified Glass Ionomer Cement as Indirect Pulp Capping Materials in Young Permanent Molars.

AIM AND OBJECTIVE: This study was carried out to compare the effectiveness of biodentine, calcium hydroxide, and 2% chlorhexidine gluconate used along with resin-modified glass ionomer cement (RMGIC) as indirect pulp capping (IPC) materials in young permanent molars. MATERIALS AND METHODS: In this study, 54 patients were selected. Among these patients, 72 young permanent molars were selected randomly in which IPC was required. These teeth were randomly categorized into three different groups and each group consisted of 24 teeth. The first group was group A consisting of teeth treated with biodentine, the second group was group B consisting of teeth treated with 2% chlorhexidine gluconate being followed by RMGIC, while the third was group C consisting of teeth treated with calcium hydroxide. All cases were subjected to follow-up for clinical and radiographic evaluation at 4, 8, and 16 months. The data were recorded and analyzed statistically by utilizing the Chi-square test. RESULTS: After 16 months, 95.83% of cases in group A consisting of teeth treated with biodentine showed successful results both clinically and radiographically. While 87.5% of cases in group B consisting of teeth treated with 2% chlorhexidine gluconate being followed by RMGIC showed successful results. And finally, 91.66% of cases in group C consisting of teeth treated with calcium hydroxide showed successful results. CONCLUSION: Biodentine can be efficiently used as an IPC agent in young permanent molars although all three materials were effective in IPC with a nonsignificant difference statistically. This study highlights the success of IPC in young permanent molars and the choice of better IPC material can be biodentine. CLINICAL SIGNIFICANCE: Indirect pulp capping is one of the procedures in which preservation of carious affected dentin nearest to the pulp is carried out to protect the pulp. Several new IPC agents like biodentine have been introduced. Hence, it is necessary to evaluate their effectiveness. How to cite this article: Kaul S, Kumar A, Jasrotia A, et al. Comparative Analysis of Biodentine, Calcium Hydroxide, and 2% Chlorhexidine with Resin-modified Glass Ionomer Cement as Indirect Pulp Capping Materials in Young Permanent Molars. J Contemp Dent Pract 2021;22(5):511-516.

Evaluation of Sealing Potential of Different Repair Materials in Furcation Perforations Using Dye Penetration: An In Vitro Study.

AIM: The present study aimed to assess the sealing ability of various repair materials in furcation perforations using dye penetration. MATERIALS AND METHODS: A total of 80 human first molars from mandible with unbroken enamel surfaces, which were extracted completely for periodontal reasons, were chosen. All extracted teeth were kept in a sterile solution up until further use. Endo-access bur was used to prepare endodontic access cavity, and a high-speed long shank round bur was used to create a planned perforation on the floor of pulp. All the specimens were randomly grouped (20 teeth in each group): Group I: control; group II: Pro-Root MTA; group III: resin-modified glass-ionomer cement (RM GIC); and group IV: Biodentin. After placement of repair materials in perforated furcation, the chamber of each tooth was accessed with 2% methylene blue dye. Later, a diamond disk was used to split the teeth buccolingually. A stereomicroscope (10×) was used to visualize the highest dye penetration. RESULTS: The least penetration was seen in teeth repaired by Biodentin group (0.88 ± 0.02), next by Pro-Root MTA group (1.24 ± 0.13) and resin-modified glass ionomer cement group (3.62 ± 0.46). A statistically significant difference was seen among different perforation repair materials by analysis of variance. A statistically significant difference (p value < 0.05) was found between each group, excluding group II v/s group IV. CONCLUSION: This study concluded that reduced dye penetration in perforation repair along the furcations and improved sealing ability are shown by biodentine group in comparison to Pro-Root MTA and resin-modified glass-ionomer cement group. CLINICAL SIGNIFICANCE: Root perforations along the furcation that develop due to the endodontic procedures have a remarkable damaging effect on prognosis and frequently result in loss of secondary periodontal attachment, thus resulting in early loss of the involved tooth. Therefore, the selection of biocompatible repair material aids to enhance the treatment prognosis.

Dentin Conditioning Using Different Laser Prototypes (Er,Cr:YSGG; Er:YAG) on Bond Assessment of Resin-modified Glass Ionomer Cement.

AIM: The aim of this study was to evaluate and compare various conditioning regimes (laser and conventional) on shear bond strength (SBS) of resin-modified glass ionomer cement (RMGIC) bonded to dentin. MATERIALS AND METHODS: Sixty non-carious intact maxillary molars were cleaned, isolated, and randomly divided into six groups (n = 10). Before randomization, the dentin surface was exposed and finished. Samples in group I were conditioned using Er,Cr:YSGG laser (ECYL). Specimens in group II were conditioned using Er:YAG laser (EYL), and the dentin surfaces of specimens in group III and group IV were conditioned using cavity conditioner and K930. Similarly, the samples in group V and group VI were surface treated using 17% EDTA and total etch. All samples were bonded with RMGIC following conditioning regime. For SBS testing, the samples were placed in universal testing machine. A fracture analysis of debonded surfaces was evaluated using stereomicroscope at 40× magnification. Means and standard deviations (SDs) were calculated using analysis of variance (ANOVA) and Tukey's post hoc test at a significant level of p < 0.05. RESULTS: The maximum bond strength values were observed in group VI total etch (23.85 ± 3.67). The lowest bond strength was displayed in laser dentin group II conditioned by EYL (11.65 ± 2.77). Dentin conditioned with ECYL, cavity conditioner, K930 conditioner, and 17% ethylenediaminetetraacetic acid (EDTA) were found to be comparable, p > 0.05. Cohesive failure was dominant among experimental groups. CONCLUSION: Er,Cr:YSGG laser has a potential to be recommended for dentin conditioning prior to application of RMGIC. CLINICAL SIGNIFICANCE: Dentin conditioning enhances adhesion of RMGIC for improved prognosis and treatment outcome.

Bond Integrity of Resin-modified Glass Ionomer to Dentin Conditioned Using Photodynamic Therapy and Low-level Laser Therapy: An In Vitro Study.

AIM: The aim of the study was to assess the conditioning efficacy of photodynamic therapy (PDT) and Er,Cr:YSGG laser (ECYL) to dentin compared with conventional regime bonded to resin-modified glass ionomer (RMGIC). MATERIALS AND METHODS: Forty mandibular teeth were cleaned, disinfected, and mounted vertically within the segments of polyvinyl pipes up to cementoenamel junction. The occlusal surfaces were flattened, and samples were divided into four groups according to conditioning protocols. Samples in groups I and II underwent PDT, samples in group III were conditioned with low-level laser therapy (LLLT) using Er,Cr:YSGG laser (ECYL), and samples in group IV were conditioned using polyacrylic acid (PAA). Fuji II LC was applied incrementally and light cured for 20 seconds. All samples were placed in universal testing machine for shear bond strength (SBS) testing. The fracture surface was analyzed using stereomicroscope at 50× magnification to determine mode of failure. Among different investigational groups Tukey test was used as post hoc along with analysis of variance (ANOVA). Significance level was established at p <0.05. RESULTS: Maximum SBS values were observed in group IV dentin conditioned with PAA (19.55 ± 1.84 MPa), whereas minimum SBS values were shown by group I (methylene blue photosensitizer, MBP) activated by PDT (13.52 ± 1.22 MPa). In group III, dentin conditioned with ECYL (18.22 ± 2.07 MPa) and group IV (19.55 ± 1.84 MPa) surface treated with PAA exhibited comparable SBS values (p > 0.05). Fracture analysis revealed that in PDT group adhesive failure type was in majority. However, admixed failure type was commonly presented in groups III and IV. CONCLUSION: PDT of dentin using photosensitizers MBP and CP deteriorates bond values when bonded to RMGIC. The use of LLLT to condition dentin has the potential to improve SBS. CLINICAL SIGNIFICANCE: Dentin conditioning with LLLT using ECYL may improve, is of utmost importance for better treatment outcome, predictable prognosis, and improved bond integrity to RMGIC.

Effect of Different Liners on Pulpal Outcome after Partial Caries Removal: A Preliminary 12 Months Randomised Controlled Trial.

AIM: The aim of this double-blinded parallel randomised controlled trial was to compare the effect of different liners on 12-month pulp health outcomes after partial caries removal (PCR) with composite restorations in permanent molars. METHODS: The study was registered at clinicaltrials.gov with registration No. NCT0328695 and conducted in the Department of Conservative dentistry and Endodontics, Post Graduate Institute of Dental Sciences Rohtak with no external financial support. One hundred and ninety-eight participants (116 males, 82 females and age 14-54 years) with vital permanent mature mandibular molars having deep caries involving two-thirds or more of dentin were randomised to calcium hydroxide (CH), resin-modified GIC (RMGIC) and no liner (DC) groups after PCR. After a follow-up time of 12 months, success was defined as positive response to pulp sensibility and absence of periapical alterations. RESULTS: Categorical variables were compared using chi-square test. Two analytical approaches were used, such as intention-to-treat and per-protocol approach. Success rates in per-protocol approach were 96.8, 96.5, and 94.6% for CH, RMGIC and DC groups, respectively with no significant difference between 3 groups (p = 0.811). None of the baseline variables had any significant influence on the treatment success. CONCLUSION: Partial caries excavation has a high success rate to treat deep carious lesions in permanent teeth after 12 months of follow-up, indicating that the retention of carious dentin does not interfere with pulp vitality or restoration survival. Also, the success of the treatment is independent of the lining material used over the demineralized dentin.

Effects of Luting Cements and Surface Conditioning on Composite Bonding Performance to Zirconia.

PURPOSE: This study compared bond strength, durability, and mechanical properties of luting cements for bonding zirconia: a resin-modified glass ionomer cement (RMGIC), a conventional composite cement, and two self-adhesive composite cements. MATERIALS AND METHODS: The air-abraded zirconia specimens were assigned to 12 groups (n = 30) to prepare bonded specimens. Classification was based on the pre-conditioning selection: none; primers containing 10-methacryloyloxydecyl dihydrogen phosphate (MDP); universal adhesives containing MDP. Further classification was done according to the type of luting cement: RMGIC; conventional composite cement; MDP-free self-adhesive composite cement; MDP-containing self-adhesive composite cement. The shear bond strength (SBS) was measured after 24 h of water storage or aging with 20,000 thermocycles plus an additional 60 days of water storage at 37°C. The elastic modulus and three-point bending strength were determined, and a related Weibull analysis of the four luting cements was performed. RESULTS: The choice of luting cement and aging significantly affected the SBS. Aging decreased the SBS in most groups, except for those that used MDP-containing primers plus conventional composite cements. RMGIC had SBS (before and after aging) that were similar to the MDP-free self-adhesive composite cement. Use of MDP-containing products prior to conventional composite cements provided the highest initial SBS. However, pre-conditioning with MDP-containing products failed to increase the SBS of RMGIC. RMGIC showed lower elastic modulus and three-point bending strength than did the three composite cements. CONCLUSIONS: RMGIC is an alternative to composite cements for luting zirconia restorations. Conditioning with a primer containing MDP combined with conventional composite cement is more reliable.

Retention rates and caries-preventive effects of two different sealant materials: a randomised clinical trial.

OBJECTIVES: The aim of this study was to compare the caries-preventive effect and the retention rates of sealants prepared with a new modified and a high-viscosity glass-ionomer cement (GIC) in recently erupted first permanent molars.  MATERIALS AND METHODS: Fifty-six children (224 teeth) were included in a split-mouth randomised clinical trial. All children had their four first permanent molars sealed with either Clinpro XT Varnish (CXT) or Fuji IX GP FAST (FJ). FJ sealants were placed according to the ART protocol. Retention rates and caries-preventive effect of both materials were assessed clinically after 24 months, and survival curves were created according to the Kaplan-Meier method. For sealant retention rates, analyses were performed according to both the traditional method and modified sealant retention categorisation. RESULTS: FJ sealants were retained longer in comparison to CXT sealants (p < 0.05), regardless of the categorisation used. In relation to the caries-preventive effect, no statistically significant differences were observed between materials (p = 0.99). Sealants prepared with the high-viscosity GIC according to the ART protocol survived longer than those prepared with the modified GIC, but both materials were equally effective in preventing cavitated dentine lesions over 24 months. CONCLUSION: We concluded that GIC-based sealants are effective in preventing dentine caries lesions.

Glass ionomer cement inhibits secondary caries in an in vitro biofilm model.

OBJECTIVES: The objective of this study was to investigate the effect of different glass ionomer cements on secondary caries inhibition in a fully automated in vitro biofilm model. MATERIALS AND METHODS: One hundred and twenty-four extracted third molars received class V cavities and were filled with one conventional (Ketac Molar/KM), and two resin-modified glass ionomer cements (Photac Fil/PF, Ketac N100/KN, 3M Espe). A bonded resin composite (Single Bond Plus/Filtek Supreme XTE) served as control. After 14 days water storage at 37 °C, specimens were thermocycled (10,000 × 5/55 °C). Over a period of 10 days, specimens were subjected to cariogenic challenge for 3/4/6 h/day. Demineralization was caused by Streptococcus mutans (DSM 20523) alternatingly being rinsed over specimens using artificial saliva. After biological loading, teeth were cut longitudinally and demineralization depths were evaluated at the margins and at a distance of 0.5 mm from the margins using fluorescence microscopy. Marginal quality was investigated under a SEM at ×200 magnification. RESULTS: Four-hour demineralization depths were for enamel margins (EM), enamel (E), dentin margin (DM), and dentin (D) (µm ± SD): KM: EM 12 ± 8, E 33 ± 7, DM 56 ± 11, D 79 ± 6; PF: EM 19 ± 13, E 34 ± 13, DM 53 ± 10, D 77 ± 12; and KN: EM 26 ± 5, E 38 ± 6, DM 57 ± 11, D 71 ± 7. For all glass ionomer cements (GICs), demineralization depth at the margins was less compared to 0.5 mm distance, with demineralization depth having been correlated to duration of cariogenic challenge (ANOVA [mod. LSD, p < 0.05]). Compared to the bonded resin composite, all GICs exhibited caries inhibition at restoration margins in enamel and dentin. CONCLUSIONS: Fluoride-releasing GIC materials exhibit a secondary caries inhibiting effect in vitro. CLINICAL RELEVANCE: Glass ionomer cements have a higher secondary caries inhibiting effect than resin composites.

Effects of various debonding and adhesive clearance methods on enamel surface: an in vitro study.

BACKGROUND: The purpose of this study was to evaluate orthodontic debonding methods by comparing the surface roughness and enamel morphology of teeth after applying two different debonding methods and three different polishing techniques. METHODS: Forty eight human maxillary premolars, extracted for orthodontic reasons, were randomly divided into three groups. Brackets were bonded to teeth with RMGIC (Fuji Ortho LC, GC, Tokyo, Japan) (two groups, n = 18 each) after acid etching (30s), light cured for 40 s, exposed to thermocycling, then underwent 2 different bracket debonding methods: debonding pliers (Shinye, Hangzhou, China) or enamel chisel (Jinzhong, Shanghai, China); the third group (n = 12) comprised of untreated controls, with normal enamel surface roughness. In each debonded group, three cleanup techniques (n = 6 each) were tested, including (I) diamond bur (TC11EF, MANI, Tochigi, Japan) and One-Gloss (Midi, Shofu, Kyoto, Japan), (II) a Super-Snap disk (Shofu, Kyoto, Japan), and (III) One-Gloss polisher. The debonding methods were compared using the modified adhesive remnant index (ARI, 1-5). Cleanup efficiencies were assessed by recording operating times. Enamel surfaces were qualitatively and quantitatively evaluated with scanning electron microscopy (SEM) and surface roughness tester, respectively. Two surface roughness variables were evaluated: Ra (average roughness) and Rz (10-point height of irregularities). RESULTS: The ARI scores of debonded teeth were similar with debonding pliers and enamel chisel (Chi-square = 2.19, P > 0.05). There were significant differences between mean operating time in each group (F = 52.615, P < 0.01). The diamond bur + One-Gloss took the shortest operating time (37.92 ± 3.82 s), followed by the Super-Snap disk (56.67 ± 7.52 s), and the One-Gloss polisher (63.50 ± 6.99 s). SEM appearance provided by the One-Gloss polisher was the closest to the intact enamel surface, and surface roughness (Ra: 0.082 ± 0.046 µm; Rz: 0.499 ± 0.200 µm) was closest to the original enamel (Ra: 0.073 ± 0.048 µm; Rz: 0.438 ± 0.213 µm); the next best was the Super-Snap disk (Ra: 0.141 ± 0.073 µm; Rz: 1.156 ± 0.755 µm); then, the diamond bur + One-Gloss (Ra: 0.443 ± 0.172 µm; Rz: 2.202 ± 0.791 µm). CONCLUSIONS: Debonding pliers were safer than enamel chisels for removing brackets. Cleanup with One-Gloss polisher provided enamel surfaces closest to the intact enamel, but took more time, and Super-Snap disks provided acceptable enamel surfaces and efficiencies. The diamond bur was not suitable for removing adhesive remnant.

Significant shear bond strength improvements of a resin-modified glass ionomer cement with a resin coating.

Previous evidence has suggested that resin-modified glass ionomer cements (RMGICs) may be sensitive to temperature and moisture changes for the first 24 hours after photopolymerization. To test the hypothesis that a resin coating placed over the surface of an RMGIC restoration would decrease the susceptibility to moisture and temperature conditions, 44 RMGIC samples were prepared in inverted-cone recesses drilled in epoxy resin plates. After abrasion of all samples with 800-grit silicon carbide paper to simulate a diamond bur finish on the surface, a coat of highly filled resin was applied to the experimental group (n = 22) and cured according to the manufacturer's instructions. The plates were thermocycled 500 times between 5°C and 55°C and then maintained at 37°C with 95% humidity. The thermocycled samples were bonded to a second epoxy resin plate filled with RMGIC and subjected to shear bond strength testing. The resin-coated group had a significantly greater mean shear bond strength than the control group (P < 0.05). The resin coating also appeared to affect the mode of failure by significantly increasing the number of mixed failures (P < 0.05). The results suggest that a resin coating protects RMGIC from moisture- and temperature-induced damage and increases shear bond strength.