Critical micellar concentration determination of pure phospholipids and lipid-raft and their mixtures with cholesterol.

Phospholipids in biological membranes establish a chemical equilibrium between free phospholipids in the aqueous phase (CMC) and self-assembled phospholipids in vesicles, keeping the CMC constant. The CMC is different for each phospholipid, depends on the amount of cholesterol, and, according to the lipid-chaperone hypothesis, controls the interaction between free phospholipids and amyloidogenic proteins (such as amylin, amyloid-ß, and α-synuclein, all of which are, respectively, associated with a different proteinopathy), which governs the formation of a toxic complex between free lipids and proteins that leads to membrane destruction. Here, we provide quantitative measurements of CMCs and bilayer stability of pure phospholipids, lipid rafts, and their mixture with cholesterol by fluorescence methods (using pyrene as a probe) and light scattering techniques (resonance Rayleigh scattering and fixed-angle light scattering) performed on LUVs, as well as AFM to measure LUV dimensions. Also, we test the lipid-chaperone hypothesis on human IAPP interacting with different mixture of POPC cholesterol. Stated the importance of CMC in membrane stability and protein aggregation processes, these results could be a starting point for the development of a quantitative kinetic model for the lipid chaperone hypothesis.

Development of Eco-Friendly Scattering and Fluorimetric Methods for the Determination of Clemastine Through Its Interaction with Eosin Y: Assessment of Whiteness, Blueness, and Greenness Tools.

For the first time, clemastine was estimated in this work utilizing two validated resonance Rayleigh scattering (RRS) and fluorimetric methods. The methods relied on forming an association complex in an acidic medium between eosin Y reagent and clemastine. In the spectrofluorimetric approach, the investigated drug was quantified by quenching the fluorescence-emission intensity of eosin Y at 543.5 nm. The RRS method relied on enhancing the RRS spectrum at 331.8 nm, which is produced when eosin Y interacts with clemastine. Suitable conditions were established for the reaction to achieve maximum sensitivity. The linear values obtained from the spectrofluorimetric approach and the RRS method fall into the ranges of 0.2-1.5 µg mL- 1 and 0.25-2.0 µg mL- 1, respectively. It was established that the detection limits for these methods were 0.045 µg mL- 1 and 0.059 µg mL- 1, respectively. The developed methodologies yielded acceptable recoveries when used to estimate the quantity of clemastine in its pharmaceutical tablet dosage form. Regarding the use of greener solvents that were chosen, the suggested and reported methods were compared with the help of the Green Solvents Selecting (GSST) tool for assessing hazardous solvents to achieve sustainability. Furthermore, analytical Eco scale and comprehensive assessments of whiteness, blueness, and greenness were carried out utilizing Modified NEMI, ComplexGAPI, and AGREE evaluation tools. Additionally, recently developed tools such as BAGI and RGB 12 were applied to assess the blueness and the whiteness of the suggested methods.

Design of resonance Rayleigh scattering and spectrofluorimetric methods for the determination of the antihistaminic drug, hydroxyzine, based on its interaction with 2,4,5,7-tetraiodofluorescein: Evaluation of analytical eco-scale and greenness/whiteness algorithms.

In this work, two validated approaches were used for estimating hydroxyzine HCl for the first time using resonance Rayleigh scattering (RRS) and spectrofluorimetric techniques. The suggested approaches relied on forming an association complex between hydroxyzine HCl and 2,4,5,7-tetraiodofluorescein (erythrosin B) reagent in an acidic media. The quenching in the fluorescence intensity of 2,4,5,7-tetraiodofluorescein by hydroxyzine at 551.5 nm (excitation = 527.5 nm) was used for determining the studied drug by the spectrofluorimetric technique. The RRS approach is based on amplifying the RRS spectrum at 348 nm upon the interaction of hydroxyzine HCl with 2,4,5,7-tetraiodofluorescein. The spectrofluorimetric methodology and the RRS methodology produced linear results within ranges of 0.15-1.5 µg ml-1 and 0.1-1.2 µg ml-1, respectively. LOD values for these methods were determined to be 0.047 µg ml-1 and 0.033 µg ml-1, respectively. The content of hydroxyzine HCl in its pharmaceutical tablet was estimated using the developed procedures with acceptable recoveries. Additionally, the application of four greenness and whiteness algorithms shows that they are superior to the previously reported method in terms of sustainability, economics, analytical performance, and practicality.

Study on the interaction between erythrosine B and the cardiac drug amiodarone using fluorescence, scattering, and absorbance spectra and their analytical application.

In an acidic buffered solution, erythrosine B can react with amiodarone to form an association complex, which not only generates great enhancement in resonance Rayleigh scattering (RRS) spectrum of erythrosine B at 346.5 nm but also results in quenching of fluorescence spectra of erythrosine B at λemission = 550.4 nm/λexcitation = 528.5 nm. In addition, the formed erythrosine B-amiodarone complex produces a new absorbance peak at 555 nm. The spectral characteristics of the RRS, absorbance, and fluorescence spectra, as well as the optimum analytical conditions, were studied and investigated. As a result, new spectroscopic methods were developed to determine amiodarone by utilizing erythrosine B as a probe. Moreover, the ICH guidelines were used to validate the developed RRS, photometric, and fluorimetric methods. The enhancements in the absorbance and the RRS intensity and the decrease in the fluorescence intensity of the used probe were proportional to the concentration of amiodarone in ranges of 2.5-20.0, 0.2-2.5, and 0.25-1.75 µg/mL, respectively. Furthermore, limit of detection values were 0.52 ng/mL for the spectrophotometric method, 0.051 µg/mL for the RRS method, and 0.075 µg/mL for the fluorimetric method. Moreover, with good recoveries, the developed spectroscopic procedures were applied to analyze amiodarone in its commercial tablets.

Determination of doxepin hydrochloride in spiked human plasma and capsule after derivatization with eosin Y using resonance Rayleigh scattering, second-order scattering and frequency doubling scattering methods.

Doxepin hydrochloride (DOX) is a tricyclic antidepressant drug. Three sensitive spectrofluorimetric methods, namely resonance Rayleigh scattering (RRS), frequency doubling scattering (FDS) and second-order scattering (SOS), were developed and validated for their estimation of doxepin in spiked human plasma and formulation using liquid-liquid extraction method through the formation of an ion pair complex with eosin Y at a pH of 4.5. Various factors affecting fluorescence intensity were optimized, and the reaction kinetics was determined using the Arrhenius equation method. Different scattering methods such as RRS, FDS and SOS were developed at maximum scattering wavelengths λex /λem = 567/567 nm for RRS, 720/360 nm for SOS and 260/520 nm for FDS, respectively. The methods exhibited high sensitivities, and the detection limits for DOX were found to be 0.82, 1.20 and 1.03 ng/ml for RRS, FDS and SOS methods, respectively. The FDS method exhibited the highest sensitivity. The methods were validated using the International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use guidelines and applied to determine DOX in capsule and spiked human plasma samples.

Validated spectrofluorimetric and resonance Rayleigh scattering methods for determining naftidrofuryl in varied pharmaceutical samples based on its interaction with erythrosin B.

Naftidrofuryl is a vasodilator medication used for treating cerebral and peripheral vascular diseases. In this study, two spectroscopical techniques, spectrofluorimetric and resonance Rayleigh scattering (RRS), were utilized to quantify naftidrofuryl in its pharmaceutical samples. The developed methodologies in this study rely on a facile process of forming an association complex between erythrosine B reagent and naftidrofuryl under acidic conditions. The fluorimetric assay is based on the ability of naftidrofuryl to quench and decrease the native fluorescence intensity of the reagent when measured at λ emis . = 550 nm ( λ excit . = 526 nm). Under similar reaction conditions, the RRS method relies on the observed amplification in the RRS spectrum of the reagent at a wavelength of 577 nm following its interaction with naftidrofuryl. The methods exhibited linearity within the ranges 0.2-1.6 µg/ml (r2  = 0.999) and 0.1-1.4 µg/ml (r2  = 0.9994), with limit of quantitation values of 0.146 and 0.099 µg/ml, and limit of detection values of 0.048 and 0.032 µg/ml, for the fluorometric and the RRS methods, respectively. Moreover, the quenching between the dye and naftidrofuryl was studied using Stern-Volmer analysis, and the methodologies were experimentally optimized and validated. Additionally, acceptable recoveries were achieved when the procedures were applied to determine naftidrofuryl in pharmaceutical samples.

Highly sensitive and specific resonance Rayleigh scattering detection of esophageal cancer cells via dual-aptamer target binding strategy.

The modification of EGFR aptamer (Apt 1) and HER2 aptamer (Apt 2) with gold nanoparticles (AuNPs) is reported to obtain probe I (Apt 1-AuNPs) and probe II (Apt 2-AuNPs). Taking Eca109, KYSE510, and KYSE150 cells as models, the sandwich scattering system of probe I-cell-probe II was formed by the recognition of tumor markers by the aptamer modified probe, and the resonance Rayleigh scattering (RRS) spectra were investigated. The results showed that the scattering system can be used to quantitatively detect the Eca109 cell lines in the range 5.0×10 to 5.0×105 cells·mL-1 with a detection limit of 15 cells· mL-1.The system can also detect the KYSE510 cell lines in a linear range of 5.0×10 to 5.0×105 cells·mL-1 with a detection limit of 18 cells·mL-1 and the KYSE150 cell lines in a linear range of 3.0×10 to 5.0×105 cells·mL-1 with a detection limit of 12 cells·mL-1. To demonstrate the potential application of the RRS method for real sample analysis, cells were spiked into blank serum samples at concentrations from 1.0×102 to 1.0×105 cells·mL-1. The recovery was between 97.0% and 102.3%, and the RSD was between 1.1% and 4.9%, confirming the feasibility of the proposed method for ESCC cell determination.

Resonance Rayleigh scattering technique-using chitosan-capped gold nanoparticles, approaches spectrofluorimetric method for determination of Bentazone residual in water samples.

In this study, a resonance Rayleigh scattering technique-based sensing method for detecting Bentazone residual in water samples has been developed. This technique was carried out using chitosan-capped gold nanoparticles with a spectrofluorimetric method. Experimental results revealed that the developed method could allow the detection of Bentazone residual as low as a concentration of 0.02 ng mL-1 within 50-sec time. Overall results confirmed the very low detection limit for measuring the Bentazone. The chitosan-capped gold nanoparticles as an excellent sensor were applied to measure and analyze Bentazone in water samples.

This article developed a resonance Rayleigh scattering technique-based sensing method for the detection of bentazone residual in water samples. This technique was carried out using chitosan-capped gold nanoparticles with spectrofluorimetric method. Because, Chitosan-capped AuNPs have exciting features, such as resonance Rayleigh scattering (RRS).

Applying resonance Rayleigh scattering and spectrofluorimetric techniques for the selective determination of neomycin sulfate using Congo red as a probe: Applications for wastewater analysis.

Two simple, sensitive, and low-cost fluorescence spectroscopy methods for neomycin (NEO) detection were developed. Both methods were based on the interaction between NEO and Congo red (CR) in acidic buffer medium to form an ion-association complex. The quenching effect of the formed ion-association complex on the fluorescence of CR at 421 nm is a basic principle of fluorescence analysis, whilst the resonance Rayleigh scattering (RRS) method was used to enhance the resonance Rayleigh scattering spectrum at 384 nm by adding NEO. Experimental conditions such as pH, temperature, reaction time, CR concentration, and the ionic strength of the two methods were investigated and optimized. In addition, the effect of common coexisting substances on the method was tested and the results showed good selectivity. The composition of ion-association complexes, the reaction mechanism, and reasons for the enhanced intensity of RRS are discussed. Under optimum conditions, the responses of the fluorescence spectrophotometry and RRS methods showed good linearity with NEO concentrations in the range 0.2-3.0 µg ml-1 and 0.1-3.0 µg ml-1 , respectively. The detection limits of fluorescence spectrophotometry and RRS spectroscopy techniques were 0.02 µg ml-1 and 0.01 µg ml-1 , respectively. Finally, the two methods were applied to the analysis of wastewater and the results were satisfactory.

Resonance Rayleigh scattering approach based on association complex formation with erythrosine B for determination of venlafaxine, application to the dosage form and spiked human plasma.

The interaction of venlafaxine hydrochloride (VLX) with erythrosine B was investigated using a resonance Rayleigh scattering (RRS) spectroscopic technique. In acetate buffer (pH 3.4), erythrosine B reacted with VLX to form a 1:1 ion-pair complex with concomitant enhancement in RRS intensity that was measured at 330 nm. In addition, the stability constant and the change in free energy of the reaction were estimated. Based on this interaction a new method was developed for a sensitive VLX analysis using erythrosine B as a probe. The results indicated that this method had good selectivity in the presence of coexisting compounds. The scattering intensity (ΔIRRS ) was linearly dependent on VLX concentration over the range 0.04-1.0 µg ml-1 with a determination coefficient (r) of 0.9998. The limit of detection and limit of quantitation were 0.01 and 0.03 µg ml-1 , respectively. This method could be suitably used for analysis of VLX in pharmaceutical capsules and human plasma.

Utilizing inner filter effect in resonance Rayleigh scattering technique: a case study with silver nanocubes as RRS probe and several analytes as absorbers.

It was demonstrated that the mechanism of the inner filter effect (IFE) can emerge well in the resonance Rayleigh scattering (RRS) technique and be utilized as a new analytical method in the design of innovative IFE-based sensors. To prove this process, silver nanocubes (Ag NCs) with tunable extinction spectra were selected as RRS probes, and three analytes, doxorubicin (DOX), sunitinib (SUN), and Alizarin Red S (ARS), were considered as the typical absorbers. In addition, in the presence of SUN as a typical analyte, the quenching of the RRS signal of Ag NCs, with λmax of 419 nm, was linear in the range 0.01 to 2.5 µM of SUN. The limit of detection (LOD) was 0.0025 µM. The introduced method was then used to develop a dual-signal assay for the ratiometric determination of Al3+ ions. The suggested dual-signal assay was based on the color changes of ARS caused by Al3+ and the IFE between ARS and Ag NCs. The obtained results showed that the two characteristics of response sensitivity and linear dynamic range are very satisfactory for sensing Al3+ ions. The findings of this study demonstrate that the newly developed IFE mechanism can be employed as an attractive and highly efficient analytical technique for measuring different analytes.

A resonance Rayleigh scattering and fluorescence quenching dual-channel sensor for sensitive detection of chitosan based on Eosin Y.

The sensitive chitosan (CTS) detection methods based on the resonance Rayleigh scattering (RRS) quenching method and fluorescence quenching of Eosin Y were put forward. In the HAC-NaAC buffer solution, Eosin Y interacted with Triton X-100 to generate the binary complex which served as the RRS spectral probe. When CTS was interacted with the binary complex, the RRS intensity decreased with the increase of CTS. At the same time, the fluorescence intensity of Eosin Y decreased in the presence of Triton X-100, and the fluorescence intensity of "Eosin Y+Triton X-100" system further decreased when CTS was added. So it was further proved that there was a forming complex in "Eosin Y+Triton X100+CTS" system. The interaction was characterized by zeta potential, RRS, fluorescence spectrum, and UV-Vis spectroscopy. Under optimal conditions, there was a good linear relationship between the RRS decreased intensity (ΔI) and the concentration of CTS in the range of 0.05-1.30 µg/mL, with a regression equation of ΔI = 1325c + 73.66 and correlation coefficient (R2) of 0.9907. The detection limit was 0.0777 µg/mL. Likewise, the linear range of the fluorescence quenching was 0.03-1.30 µg/mL; the regression equation was ΔF = 1926c + 294.0 with R2 = 0.9800 under fluorescence quenching. The detection limit was 0.0601 µg/mL. Therefore, the dual-channel sensor for the determination of CTS was applied to the health products, and the results were satisfactory. The t test result showed that there was no statistical difference between the two methods.

Resonance Rayleigh scattering and spectrofluorimetric approaches for the selective determination of rupatadine using erythrosin B as a probe: application to content uniformity test.

In this study, spectrofluorimetric and resonance Rayleigh scattering techniques were applied for the first time for determination of rupatadine through two validated methods. The proposed methods were based on a facile association complex formation between rupatadine and erythrosin B reagent in acidic medium. Spectrofluorimetric determination relied on the quenching effect of rupatadine on the fluorescence intensity of erythrosin B at 556 nm (excitation = 530 nm). Conversely, the resonance Rayleigh scattering (RRS) method relied on enhancement in the resonance Rayleigh scattering spectrum of erythrosin B at 344 nm after the addition of rupatadine. The developed methods produced linear results over ranges 0.15-2.0 µg/ml and 0.1-1.5 µg/ml, with detection limits of 0.030 µg/ml and 0.018 µg/ml for the spectrofluorimetric method and the RRS method, respectively. All reaction conditions for rupatadine-erythrosin B formation were optimized experimentally and both methods were validated according to International Council for Harmonisation guidelines. The developed methods were applied to estimate rupatadine content in its pharmaceutical tablet dosage form with acceptable recoveries. Furthermore, a content uniformity test for the commercial rupatadine tablets was successfully applied by the suggested spectroscopic methods according to United States Pharmacopeia guidelines.

Applying different spectroscopic techniques for the selective determination of daclatasvir using merbromin as a probe: Applications on pharmaceutical analysis.

In this study, rapid resonance Rayleigh scattering (RRS), spectrophotometric, and spectrofluorimetric methods were performed for facile quantitation of daclatasvir dihydrochloride without interference from sofosbuvir (a co-formulated anti-hepatitis C virus drug). The proposed approaches were based on forming a binary complex between daclatasvir dihydrochloride and merbromin reagent at pH 4.1. The binary complex was measured spectrophotometrically at λmax = 544 nm. The spectrofluorimetric approach relied on the quenching effect of daclatasvir dihydrochloride on the fluorescence strength of merbromin at λEmission = 545 nm. The RRS approach depended on augmentation in the merbromin RRS spectrum at 363 nm upon addition of daclatasvir dihydrochloride. The presented methodologies were linear over the concentration ranges 2.5-15.0, 0.2-1.6 and 0.15-3.0 µg ml-1 with detection limits of 0.45, 0.046, and 0.036 µg ml-1 for the spectrophotometric approach, the spectrofluorometric approach, and RRS approach, respectively. Current approaches were validated in compliance with International Council for Harmonisation guidelines and utilized practically to estimate daclatasvir dihydrochloride either in binary mixtures with sofosbuvir or in its commercial tablet dosage form with good results. Moreover, the test for content uniformity was applied successfully on commercial tablets using the current spectroscopic approaches.

Investigation of the association complex formed between dapoxetine and erythrosine-B for facile dapoxetine assay in pharmaceutical formulation using resonance Rayleigh scattering and spectrofluorimetric techniques.

Premature ejaculation is a male sexual problem that is marked by rapid ejaculation and quick attainment of orgasm. Dapoxetine belongs to the antidepressant category and modulates its action by preventing the reuptake of serotonin by neurons. Dapoxetine is marketed as an off-label therapy for premature ejaculation. Here, two facile, sensitive, and green compatible approaches were established for dapoxetine assay. The approaches chemically rely on association complex formed between erythrosine-B and dapoxetine in an acidic buffered medium. The quenching effect of the formed complex on the native erythrosine fluorescence at emission 553.5 nm is simply the main idea of spectrofluorimetric assay, while resonance Rayleigh scattering methodology uses augmentation of resonance Rayleigh scattering spectrum at 345 nm by the added dapoxetine. The current approaches exhibit linearity between response and dapoxetine concentration over 0.2-2.5 µg/ml and 0.3-3.0 µg/ml for spectrofluorimetric and resonance Rayleigh scattering (RRS) methods, respectively. All variables affecting methods and complex formation were studied and precisely optimized. The criteria of validation were performed by the directives provided by International Conference on Harmonization's (ICH) Guidelines and limits of detection were 0.06 and 0.05 µg/ml for spectrofluorimetric and RRS techniques, respectively. Finally, the approaches were applied with acceptable results for pharmaceutical formulation analysis.

Single-atom Fe catalytic amplification-gold nanosol SERS/RRS aptamer as platform for the quantification of trace pollutants.

Bisphenol A (BPA), as a typical endocrine disruptor, poses a serious threat to human health. Therefore, it is urgent to establish a rapid, sensitive, and simple method for the determination of BPA. In this paper, based on the aptamer-mediated single-atom Fe carbon dot catalyst (SAFe) catalyzing the HAuCl4-ethylene glycol (EG) nanoreaction, a new SERS/RRS di-mode detection method for BPA was established. The results show that SAFe exhibits a strong catalytic effect on the HAuCl4-EG nanoreaction, which could generate purple gold nanoparticles (AuNPs) with resonance Rayleigh scattering (RRS) signals and surface-enhanced Raman scattering (SERS) effects. After the addition of BPA aptamer (Apt), it could encapsulate SAFe through intermolecular interaction, thus inhibiting its catalytic action, resulting in the reduction of AuNPs generated and the decrease of RRS and SERS signals of the system. With the addition of BPA, Apt was specifically combined with BPA, and SAFe was re-released to restore the catalytic ability; the generated AuNPs increased. As a result of this RRS and SERS signals of the system recovered, and their increment was linear with the concentration of BPA. Thus, the quantification of 0.1-4.0 nM (RRS) and 0.1-12.0 nM (SERS) BPA was realized, and the detection limits were 0.08 nM and 0.03 nM, respectively. At the same time, we used molecular spectroscopy and electron microscopy to study the SAFe-HAuCl4-ethylene glycol indicator reaction, and proposed a reasonable SAFe catalytic reaction mechanism. Based on Apt-mediated SAFe catalysis gold nanoreaction amplification, a SERS/RRS di-mode analytical platform was established for targets such as BPA.

A resonance Rayleigh scattering and colorimetric dual-channel sensor for sensitive detection of perfluorooctane sulfonate based on toluidine blue.

This work described the use of a basic phenothiazine dye (toluidine blue, TB) as a resonance Rayleigh scattering (RRS) and colorimetric probe for the detection of perfluorooctane sulfonate (PFOS). Owing to the electrostatic interactions between TB and PFOS, TB in the presence of PFOS caused great enhancement of RRS signal at dual-wavelength (I345 nm and I506 nm) and the ratio changes of absorbance (A502 nm/A630 nm). The RRS enhancement was attributed to the absorption-rescattering resonance effect, the increase of the molecular size, and the enhancement of hydrophobicity. The analytical procedure was implemented by physically mixing TB, Britton-Robinson buffer solution, and PFOS solution (or sample solution) all-in-one, avoiding the tedious pre-derivatization or the preparation of nanoparticles. The whole approach was less than 8 min. Under the optimal conditions, the analytical performance was acquired. The linear ranges for RRS and colorimetry were 0.04-8.0 and 1.0-20 µmol/L, with detection limits of 4.2 nmol/L and 112 nmol/L, respectively. The RRS method was applied to the determination of PFOS in environmental water with recoveries of 93.2-106%. The dual-channel sensor is convenient, rapidly responsive, sensitive, and cost-effective, integrating the advantages of RRS and colorimetry. Graphical abstract.

Redox-derivatization reaction-based rapid and sensitive determination of nitrite using resonance Rayleigh scattering method.

It remains a problem for direct detection of small inorganic nitrite ions using resonance Rayleigh scattering (RRS) method based on the direct dye-binding reaction. In the present study, a redox-derivatization reaction taking only 5 min was introduced prior to nitrite detection. In the redox-derivatization reaction, nitrite ions were reduced by excess iodine ions to generate triiodide ions (I3-), which were further derivatized with a cationic dye (basic violet 1, BV1) to form the ion associates of I3--BV1. Therefore, the RRS signal was significantly enhanced, resulting from the increase of particle size and resonance-enhanced scattering effect. The analytical procedure was performed by just mixing nitrite, oxidant, acid, and dye all-in-one, avoiding the tediousness of a multi-step process or the preparation of nanoparticles. The whole detection process including the redox-derivatization reaction was less than 6 min. The reaction conditions such as concentration of hydrochloric acid, potassium iodide, and BV1, reaction time, and temperature were investigated. Under optimum conditions, the concentration of nitrite was linear with an RRS signal of I3--BV1 ion associates at 320 nm in the range of 0.015-1.2 mg/L. The limit of detection (LOD) was calculated to be 3.0 µg/L. The RRS method was applied to the determination of nitrite in real samples such as pork sausage, milk powder, and water with recovery of 95.2-112%. With advantages of rapidness, high sensitivity, and high selectivity, the method indicates potential applicability for detection of nitrite in complex samples. The method also provides an instructive protocol for detection of analytes that generate no/weak RRS enhancement after the direct dye-binding reaction. Graphical abstract.

Application of Gelatin Decorated with Allura Red as Resonance Rayleigh Scattering Sensor to Detect Chito-Oligosaccharides.

A convenient and sensitive triple-wavelength overlapping resonance Rayleigh scattering (TWO-RRS) method for the detection of chito-oligosaccharides (COS) was proposed based on enhancing the rigid surface of porous reticular spatial structure of gelatin and COS by introducing allura red AC (AR). The interaction and resultant porous reticular spatial structure were characterized with transmission electron microscopy (TEM), RRS, and UV-Vis spectroscopy. The results indicated that gelatin and COS formed porous reticular spatial structure with an average diameter of 1.5-2.0 µm, and the RRS value of COS-AR-gelatin ternary system with gelatin participation was significantly higher than that of COS-AR binary system. Under the optimal conditions, the enhanced TWO-RRS intensity of the system was linearly proportional to COS concentration in the range of 0.30-2.50 µg/mL, and the regression equation was ΔI = 4933.2c-446.21 with R2 = 0.9980. The limit of detection was 0.0478 µg/mL. So, a new method for the detection of COS was established and verified in the health products with satisfactory results.

Structural Change of a Single Ag Nanoparticle Observed by Dark-field Microspectroscopy.

Silver nanoparticles (AgNPs) have been widely used as photocatalysts and nanosensors. Observation of the spectroscopy of a single AgNP greatly helps us understand the catalytic characteristics and morphology change of the AgNP during reactions. In the present study, AgNPs physically adsorbed on indium tin oxide (ITO) conductive glass were electrochemically reduced and oxidized, and the plasmonic resonance Rayleigh scattering (PRRS) spectrum of an individual AgNP was observed under a dark-field microscopy (DFM) equipped with a spectrometer. The electrochemical oxidization of the AgNP under constant potential caused a redshift of the PRRS peak for 30±5 nm. However, electrochemical reduction of the AgNP could not make the PRRS peak completely shift back to the initial position. In situ AFM and SEM characterization confirmed that very small Ag fragments (<10 nm) formed around the AgNP core during electrochemical oxidization. Results showed that dark-field microspectroscopy could be used as a sensitive tool for estimating the morphology/structural changes of nanoparticles that can hardly be observed through the cyclic voltammograms of multiple AgNPs.