A longitudinal study on the bacterial quality of baby spinach cultivated in Arizona and California.

In the U.S., baby spinach is mostly produced in Arizona (AZ) and California (CA). Characterizing the impact of growing region on the bacterial quality of baby spinach can inform quality management practices in industry. Between December 2021 and December 2022, baby spinach was sampled after harvest and packaging for microbiological testing, including shelf-life testing of packaged samples that were stored at 4°C. Samples were tested to (i) determine bacterial concentration, and (ii) obtain and identify bacterial isolates. Packaged samples from the Salinas, CA, area (n = 13), compared to those from the Yuma, AZ, area (n = 9), had a significantly higher bacterial concentration, on average, by 0.78 log10 CFU/g (P < 0.01, based on aerobic, mesophilic plate count data) or 0.67 log10 CFU/g (P < 0.01, based on psychrotolerant plate count data); the bacterial concentrations of harvest samples from the Yuma and Salinas areas were not significantly different. Our data also support that an increase in preharvest temperature is significantly associated with an increase in the bacterial concentration on harvested and packaged spinach. A Fisher's exact test and linear discriminant analysis (effect size), respectively, demonstrated that (i) the genera of 2,186 bacterial isolates were associated (P < 0.01) with growing region and (ii) Pseudomonas spp. and Exiguobacterium spp. were enriched in spinach from the Yuma and Salinas areas, respectively. Our findings provide preliminary evidence that growing region and preharvest temperature may impact the bacterial quality of spinach and thus could inform more targeted strategies to manage produce quality. IMPORTANCE: In the U.S., most spinach is produced in Arizona (AZ) and California (CA) seasonally; typically, spinach is cultivated in the Yuma, AZ, area during the winter and in the Salinas, CA, area during the summer. As the bacterial quality of baby spinach can influence consumer acceptance of the product, it is important to assess whether the bacterial quality of baby spinach can vary between spinach-growing regions. The findings of this study provide insights that could be used to support region-specific quality management strategies for baby spinach. Our results also highlight the value of further evaluating the impact of growing region and preharvest temperature on the bacterial quality of different produce commodities.

Starch-based films affected by the addition of collagen from Prochilodus magdalenae residues and HPMC: Application in Andean blackberry (Rubus glaucus Benth) coatings.

Starch-based films offer the advantages of biodegradability, edibility, barrier properties, flexibility, and adaptability. This study compared the physicochemical properties of starch-based films by adding raw fish collagen and hydroxypropylmethylcellulose (HPMC). The tensile properties were evaluated, and the interaction with water was analyzed. Barrier properties, such as water vapor and oxygen permeability, were examined, and optical properties, such as gloss and good internal transmittance, were evaluated. The films were evaluated as coatings on Andean blackberries (Rubus glaucus Benth) for 2 weeks at 85% RH and 25°C. The results showed that the inclusion of collagen caused a reduction in the tensile strength and elastic modulus of the films. Also, the formulation with the highest collagen concentration (F7) exhibited the lowest weight loss and water vapor permeability, also it had the highest collagen concentration and showed the highest reduction in Xw and WAC, with values of 0.048 and 0.65 g water/g dry film, respectively. According to analyzing the optical properties, F1 presented the highest bright-ness and transmittance values, with 18GU and 82 nm values, respectively. In general, the films and coatings are alternatives to traditional packaging materials to prolong the shelf life of these fruits.

Evaluating the effects of hypoxic storage on platelet function and health using a novel storage system.

BACKGROUND: Thousands of units of whole blood (WB) and blood components are transfused daily to treat trauma patients. Improved methods for blood storage are critical to support trauma-related care. The Hemanext ONE® system offers a unique method for hypoxic storage of WB, with successfully demonstrated storage of clinically viable RBCs. This work evaluated the system for the storage of WB, focusing on platelet health and function. STUDY DESIGN AND METHODS: WB was collected from healthy donors and processed through the Hemanext ONE® system. Hemoglobin oxygen saturation (HbSO2) levels of WB were depleted to 10%, 20%, or 30% of total HbSO2 and then stored in PVC bags sealed in oxygen-impermeable bags (except for normoxic control) with samples collected on days 1, 7, and 14 post-processing. Flow cytometry assessed the activation and apoptosis of platelets. Clot dynamics were assessed based on aggregometry and thromboelastography assays, as well as thrombin generation using a calibrated-automated thrombogram method. RESULTS: Hypoxic storage conditions were maintained throughout the storage period. Hypoxia triggered increased lactate production, but pH changes were negligible compared to normoxic control. Storage at 10% HbSO2 had a significant impact on platelet function, resulting in increased activation and reduced clot formation and aggregation. These effects were less significant at 20% and 30% HbSO2. DISCUSSION: This study indicates that platelets are sensitive to hypoxic storage and suffer significant metabolic and functional deterioration when stored at or below 10% HbSO2.

The Impact of Annealing Methods on the Encapsulating Structure and Storage-Stability of Freeze-Dried Pellets of Probiotic Bacteria.

OBJECTIVE: This paper investigates the critical role of material thickness in freeze-dried pellets for enhancing the storage stability of encapsulated bacteria. Freeze dried material of varying thicknesses obtained from different annealing durations is quantified using Scanning Electron Microscopy (SEM) and X-ray microtomography (µCT), the material thickness is then correlated to the storage stability of the encapsulated cells. METHODS: A formulation comprising of sucrose, maltodextrin, and probiotic cells is quenched in liquid nitrogen to form pellets. The pellets undergo different durations of annealing before undergoing freeze-drying. The material thickness is quantified using SEM and µCT. Storage stability in both oxygen-rich and oxygen-poor environments is evaluated by measuring CFU counts and correlated with the pellet structure. RESULTS: The varying annealing protocols produce a range of material thicknesses, with more extensive annealing resulting in thicker materials. Storage stability exhibits a positive correlation with material thickness, indicating improved stability with thicker materials. Non-annealed pellets exhibit structural irregularities and inconsistent storage stability, highlighting the impracticality of avoiding annealing in the freeze-drying process. CONCLUSIONS: Extensive annealing not only enhances the storage stability of probiotic products but also provides greater control over the freeze-drying process, ensuring homogeneous and reproducible products. This study underscores the importance of material thickness in freeze-dried pellets for optimizing storage stability for probiotic formulations, and emphasize the necessity of annealing as a critical step in freeze-drying quenched pellets to achieve desired structural and stability outcomes.

Laser-induced graphene trending in biosensors: understanding electrode shelf-life of this highly porous material.

Laser-induced graphene (LIG) has received much attention in recent years as a possible transducer material for electroanalytical sensors. Its simplicity of fabrication and good electrochemical performance are typically highlighted. However, we found that unmodified and untreated LIG electrodes had a limited shelf-life for certain electroanalytical applications, likely due to the adsorption of adventitious hydrocarbons from the storage environment. Electrode responses did not change immediately after exposure to ambient conditions but over longer periods of time, probably due to the immense specific surface area of the LIG material. LIG shelf-life is seldomly discussed prominently in the literature, yet overall trends for solutions to this challenge can be identified. Such findings from the literature regarding the long-term storage stability of LIG electrodes, pure and modified, are discussed here along with explanations for likely protective mechanisms. Specifically, applying a protective coating on LIG electrodes after manufacture is possibly the easiest method to preserve electrode functionality and should be identified as a trend for well-performing LIG electrodes in the future. Furthermore, suggested influences of the accompanying LIG microstructure/morphology on electrode characteristics are evaluated.

Bacterial exopolysaccharide amendment improves the shelf life and functional efficacy of bioinoculant under salinity stress.

AIM: Bacterial exopolysaccharides (EPS) possess numerous properties beneficial for the growth of microbes and plants under hostile conditions. The study aimed to develop a bioformulation with bacterial EPS to enhance the bioinoculant's shelf life and functional efficacy under salinity stress. METHODS AND RESULTS: High EPS-producing and salt-tolerant bacterial strain (Bacillus haynessi SD2) exhibiting auxin-production, phosphate-solubilization, and biofilm-forming ability, was selected. EPS-based bioformulation of SD2 improved the growth of three legumes under salt stress, from which pigeonpea was selected for further experiments. SD2 improved the growth and lowered the accumulation of stress markers in plants under salt stress. Bioformulations with varying EPS concentrations (1% and 2%) were stored for 6 months at 4°C, 30°C, and 37°C to assess their shelf life and functional efficacy. The shelf life and efficacy of EPS-based bioformulation were sustained even after 6 months of storage at high temperature, enhancing pigeonpea growth under stress in both control and natural conditions. However, the efficacy of non EPS-based bioformulation declined following four months of storage. The bioformulation (with 1% EPS) modulated bacterial abundance in the plant's rhizosphere under stress conditions. CONCLUSION: The study brings forth a new strategy for developing next-generation bioformulations with higher shelf life and efficacy for salinity stress management in pigeonpea.

As assessment of shelf life increasing competence of pectin (Zucchini) based edible coating on tomatoes.

The most recent advancement in food packaging research involves improving the shelf life of perishable foods by utilising bio-based resources that are edible, eco-friendly, and biodegradable. The current study investigated the effect of edible pectin coating on mature green tomatoes to improve shelf life and storage properties. Zucchini pectin was used to make edible coating. The antimicrobial and antioxidant properties of extracted pectin were investigated. The findings indicated that the extracted pectin had antimicrobial (Staphylococcus aureus, Escherichia coli, and Aspergillus niger) and antioxidant (34.32% at 1 mg/mL) properties.Tomatoes were immersed in pectin solutions of varying concentrations, 1, 3, and 5% (w/v). Physiological evaluations of weight loss, total sugar content, titratable acidity pH, and ascorbic acid were performed on tomatoes during their maturing stages of mature green, light red, pure red, and breaking. Coating the tomatoes with pectin (5%) resulted in minimal weight loss while increasing the retention of total sugar, ascorbic acid, and titratable acidity. The shelf life of the pectin-coated tomatoes was extended to 11 days, while the uncoated control tomatoes lasted 9 days. Thus, a 5% edible pectin solution was found to be effective in coating tomatoes. The current study suggests that using 5% pectin as an edible coating on tomatoes can delay/slow the ripening/maturing process while also extending the shelf-life of tomatoes without affecting their physiochemical properties, which is scalable on a large scale for commercial purposes.

Integrated procurement and reprocessing planning for reusable medical devices with a limited shelf life.

We present a new model formulation for a multiproduct dynamic order quantity problem with product returns and a reprocessing option. The optimization considers the limited shelf life of sterile medical devices as well as the capacity constraints of reprocessing and sterilization resources. The time-varying demand is known in advance and must be satisfied by purchasing new medical devices or by reprocessing used and expired devices. The objective is to determine a feasible procurement and reprocessing plan that minimizes the incurred costs. The problem is solved in a heuristic manner in two steps. First, we use a Dantzig-Wolfe reformulation of the underlying problem, and a column generation approach is applied to tighten the lower bound. In the next step, the obtained lower bound is transformed into a feasible solution using CPLEX. Our numerical results illustrate the high solution quality of this approach. The comparison with a simulation based on the first-come-first-served principle shows the advantage of integrated planning.

Which domestic refrigerator temperatures in Europe? - Focus on shelf-life studies regarding Listeria monocytogenes (Lm) in ready-to-eat (RTE) foods.

Listeria monocytogenes (Lm) is a pathogenic bacteria able to grow at refrigerated temperatures, widely distributed in the environment. This bacteria is susceptible to contaminate various food products of which refrigerated ready-to-eat foods (RTEF) may pose a risk for public health. In Europe, food business operators (FBOs) shall ensure that foodstuffs comply with the relevant microbiological criteria set out in the Regulation (EC) N°2073/2005. Food safety criteria for Lm are defined in RTEF throughout their shelf-life. FBOs should implement studies to demonstrate that the concentration of Lm does not exceed 100 CFU/g at the end of the shelf-life, taking into account foreseeable conditions of distributions, storage and use, including the use by consumers. However, this last part of the cold chain for food products is the most difficult to capture and control. For this purpose, the European Union Reference Laboratory for Lm (EURL Lm) launched an inquiry to its National Reference Laboratory network and reviewed the scientific literature from 2002 to 2020. The outcomes were integrated in the technical guidance document of the EURL Lm to assess shelf-life of RTEF which resulted in the recommendation to use 10 °C as the reference temperature to simulate the reasonably foreseen storage conditions in domestic refrigerators.

The Gamma concept approach as a tool to predict fresh produce supporting or not the growth of L. monocytogenes.

Challenge tests are commonly employed to evaluate the growth behavior of L. monocytogenes in food matrices; they are known for being expensive and time-consuming. An alternative could be the use of predictive models to forecast microbial behavior under different conditions. In this study, the growth behavior of L. monocytogenes in different fresh produce was evaluated using a predictive model based on the Gamma concept considering pH, water activity (aw), and temperature as input factors. An extensive literature search resulted in a total of 105 research articles selected to collect growth/no growth behavior data of L. monocytogenes. Up to 808 L. monocytogenes behavior values and physicochemical characteristics were extracted for different fruits and vegetables. The predictive performance of the model as a tool for identifying the produce commodities supporting the growth of L. monocytogenes was proved by comparing with the experimental data collected from the literature. The model provided satisfactory predictions on the behavior of L. monocytogenes in vegetables (>80% agreement with experimental observations). For leafy greens, a 90% agreement was achieved. In contrast, the performance of the Gamma model was less satisfactory for fruits, as it tends to overestimate the potential of acid commodities to inhibit the growth of L. monocytogenes.

Antimicrobial effect of garlic against foodborne pathogens in ground mutton.

The antimicrobial effect of fresh garlic (20, 30, and 50 g/kg) and the equivalent concentrations of garlic oil (80, 120, and 200 mg/kg) was investigated in ground mutton during storage at 4 °C. By day 6 and thereafter, mutton meatballs treated with 50 g/kg of fresh garlic and 200 mg/kg garlic oil exhibited a significant decline in psychrotrophic and Pseudomonas counts in comparison with control. Fresh garlic added at a concentration of 50 g/kg exhibited the highest antimicrobial effect, followed by garlic oil at 200 mg/kg, fresh garlic at 30 g/kg, and garlic oil at 120 mg/kg. By the 15th day of storage, the fresh garlic added at concentrations of 50 and 30 g/kg and garlic oil added at concentrations of 120, and 200 mg/kg inactivated the populations of foodborne pathogens artificially inoculated into ground mutton and exhibited significant (P < 0.01) lower counts in Salmonella Typhimurium, Escherichia coli O157:H7, Listeria monocytogenes, and Staphylococcus aureus by more than 3 logs CFU/g, in comparison to control. Therefore, fresh garlic and garlic oil can be used as natural antimicrobial food additives to extend the shelf life and inactivate the populations of foodborne pathogens in meat products.

Combined treatment of pulsed light and nisin-organic acid based antimicrobial wash for inactivation of Escherichia coli O157:H7 in Romaine lettuce, reduction of microbial loads, and retention of quality.

Microbial safety of fresh produce continues to be a major concern. Novel antimicrobial methods are needed to minimize the risk of contamination. This study investigated the antimicrobial efficacy of pulsed light (PL), a novel nisin-organic acid based antimicrobial wash (AW) and the synergy thereof in inactivating E. coli O157:H7 on Romaine lettuce. Treatment effects on background microbiota and produce quality during storage at 4 °C for 7 days was also investigated. A bacterial cocktail containing three outbreak strains of E. coli O157:H7 was used as inoculum. Lettuce leaves were spot inoculated on the surface before treating with PL (1-60 s), AW (2 min) or combinations of PL with AW. PL treatment for 10 s, equivalent to fluence dose of 10.5 J/cm2, was optimal and resulted in 2.3 log CFU/g reduction of E. coli O157:H7, while a 2 min AW treatment, provided a comparable pathogen reduction of 2.2 log CFU/g. Two possible treatment sequences of PL and AW combinations were investigated. For PL-AW combination, inoculated lettuce leaves were initially exposed to optimum PL dose followed by 2 min AW treatment, whereas for AW-PL combination, inoculated lettuce were subjected to 2 min AW treatment prior to 10 s PL treatment. Both combination treatments (PL-AW and AW-PL) resulted in synergistic inactivation as E. coli cells were not detectable after treatment, indicating >5 log pathogen reductions. Combination treatments significantly (P < 0.05) reduced spoilage microbial populations on Romaine lettuce and also hindered their growth in storage for 7 days. The firmness and visual quality appearance of lettuce were not significantly (P > 0.05) influenced due to combination treatments. Overall, the results reveal that PL and AW combination treatments can be implemented as a novel approach to enhance microbial safety, quality and shelf life of Romaine lettuce.

Progress and Challenge of Sensors for Dairy Food Safety Monitoring.

One of the most consumed foods is milk and milk products, and guaranteeing the suitability of these products is one of the major concerns in our society. This has led to the development of numerous sensors to enhance quality controls in the food chain. However, this is not a simple task, because it is necessary to establish the parameters to be analyzed and often, not only one compound is responsible for food contamination or degradation. To attempt to address this problem, a multiplex analysis together with a non-directed (e.g., general parameters such as pH) analysis are the most relevant alternatives to identifying the safety of dairy food. In recent years, the use of new technologies in the development of devices/platforms with optical or electrochemical signals has accelerated and intensified the pursuit of systems that provide a simple, rapid, cost-effective, and/or multiparametric response to the presence of contaminants, markers of various diseases, and/or indicators of safety levels. However, achieving the simultaneous determination of two or more analytes in situ, in a single measurement, and in real time, using only one working 'real sensor', remains one of the most daunting challenges, primarily due to the complexity of the sample matrix. To address these requirements, different approaches have been explored. The state of the art on food safety sensors will be summarized in this review including optical, electrochemical, and other sensor-based detection methods such as magnetoelastic or mass-based sensors.

Modeling moisture change of packaged dry tablet dosage forms under consumer use condition.

A simple mathematical model based on product's moisture sorption isotherm and package's moisture transmission was developed to predict moisture content of dry solid tablets during consumers' use, which is useful for determination of in-use shelf life (ISL) or secondary shelf life. The moisture increase depending on amount of product remaining in the package was accounted for in the mass balance equation on the package. The model was first verified by literature data of desiccant canisters in a plastic bottle of high density polyethylene exposed to two environmental conditions (25 °C and 60% relative humidity (RH); 40 °C and 75% RH) simulating in-use of removing one canister each day. Then an experimental work was conducted on dry refresher candies in a polyethylene terephthalate bottle at 25 °C with two tablets taken out every day, which confirmed the model's capability to predict the product moisture content during in-use storage of 76% and 90% RH. Its use can provide science-based accurate determination of ISL, which may work as consumer guideline. The model is also expected to be helpful for recommending management scheme of whole product life.

Comparison of vitamin C and flavanones between freshly squeezed orange juices and commercial 100% orange juices from four European countries.

Knowing the true levels of nutrients and dietary bioactives in fruit juices at the point of consumption is key to properly understand their potential health benefits. The objective was to characterise the vitamin C and flavanone content in commercial orange juices consumed in Europe, compared with fresh-squeezed juices. Commercial juices were a rich source of vitamin C (>30% of the Nutrient Reference Value). Vitamin C in fresh-squeezed juices, at the end of their shelf-life, remained 33% higher than the levels found in the commercial juices. Flavanones had similar values from both commercial and fresh juices, except for fresh samples stored for 48 h, where fresh juices had higher values (22.36 mg/100 mL). Thus, orange juices preserve their bioactive compounds during storage, with very little influence of the brand, country, industrial process or storage conditions. Main bioactive compounds in commercial juices are present at nutritionally significant levels to the freshly-squeezed ones.

Characterisation of a casein-/whey protein concentrate-Antarctic krill oil emulsion system and improvement of its storage stability.

AIMS: To develop Antarctic krill oil emulsions with casein and whey protein concentrate (WPC) and study their physicochemical properties and storage stability. METHODS: Emulsions were prepared by homogenisation and ultrasonication. The properties of the emulsions were investigated via ultraviolet ray spectroscopy, dynamic light scattering, confocal laser scanning microscope, sodium dodecyl sulphate-polyacrylamide gel electrophoresis, Fourier transform infra-red spectrometer, and fluorescence spectrum. Shelf life was predicted by the Arrhenius model. RESULTS: Casein- and WPC-krill oil emulsions were well formed; the mean particle diameters were less than 128.19 ± 0.64 nm and 158 ± 1.56 nm, the polymer dispersity indices were less than 0.26 ± 0.01 and 0.27 ± 0.01, and the zeta potential were around -46.88 ± 5.02 mV and -33.51 ± 2.68 mV, respectively. Shelf life was predicted to be 32.67 ± 1.55 days and 29.62 ± 0.65 days (40 °C), 27.69 ± 1.15 days and 23.58 ± 0.14 days (50 °C), 24.02 ± 0.15 days and 20.1 ± 0.08 days (60 °C). CONCLUSION: The prepared krill oil emulsions have great potential to become a new krill oil supplement.

Platelet Storage-Problems, Improvements, and New Perspectives.

Platelet transfusions are routine procedures in clinical treatment aimed at preventing bleeding in critically ill patients, including those with cancer, undergoing surgery, or experiencing trauma. However, platelets are susceptible blood cells that require specific storage conditions. The availability of platelet concentrates is limited to five days due to various factors, including the risk of bacterial contamination and the occurrence of physical and functional changes known as platelet storage lesions. In this article, the problems related to platelet storage lesions are categorized into four groups depending on research areas: storage conditions, additive solutions, new testing methods for platelets (proteomic and metabolomic analysis), and extensive data modeling of platelet production (mathematical modeling, statistical analysis, and artificial intelligence). This article provides extensive information on the challenges, potential improvements, and novel perspectives regarding platelet storage.

Carvacrol Encapsulation in Chitosan-Carboxymethylcellulose-Alginate Nanocarriers for Postharvest Tomato Protection.

Advancements in polymer science and nanotechnology hold significant potential for addressing the increasing demands of food security, by enhancing the shelf life, barrier properties, and nutritional quality of harvested fruits and vegetables. In this context, biopolymer-based delivery systems present themselves as a promising strategy for encapsulating bioactive compounds, improving their absorption, stability, and functionality. This study provides an exploration of the synthesis, characterization, and postharvest protection applications of nanocarriers formed through the complexation of chitosan oligomers, carboxymethylcellulose, and alginate in a 2:2:1 molar ratio. This complexation process was facilitated by methacrylic anhydride and sodium tripolyphosphate as cross-linking agents. Characterization techniques employed include transmission electron microscopy, energy-dispersive X-ray spectroscopy, infrared spectroscopy, thermal analysis, and X-ray powder diffraction. The resulting hollow nanospheres, characterized by a monodisperse distribution and a mean diameter of 114 nm, exhibited efficient encapsulation of carvacrol, with a loading capacity of approximately 20%. Their suitability for phytopathogen control was assessed in vitro against three phytopathogens-Botrytis cinerea, Penicillium expansum, and Colletotrichum coccodes-revealing minimum inhibitory concentrations ranging from 23.3 to 31.3 µg·mL-1. This indicates a higher activity compared to non-encapsulated conventional fungicides. In ex situ tests for tomato (cv. 'Daniela') protection, higher doses (50-100 µg·mL-1, depending on the pathogen) were necessary to achieve high protection. Nevertheless, these doses remained practical for real-world applicability. The advantages of safety, coupled with the potential for a multi-target mode of action, further enhance the appeal of these nanocarriers.

An Overview of Degradation Strategies for Amitriptyline.

Antidepressant drugs play a crucial role in the treatment of mental health disorders, but their efficacy and safety can be compromised by drug degradation. Recent reports point to several drugs found in concentrations ranging from the limit of detection (LOD) to hundreds of ng/L in wastewater plants around the globe; hence, antidepressants can be considered emerging pollutants with potential consequences for human health and wellbeing. Understanding and implementing effective degradation strategies are essential not only to ensure the stability and potency of these medications but also for their safe disposal in line with current environment remediation goals. This review provides an overview of degradation pathways for amitriptyline, a typical tricyclic antidepressant drug, by exploring chemical routes such as oxidation, hydrolysis, and photodegradation. Connex issues such as stability-enhancing approaches through formulation and packaging considerations, regulatory guidelines, and quality control measures are also briefly noted. Specific case studies of amitriptyline degradation pathways forecast the future perspectives and challenges in this field, helping researchers and pharmaceutical manufacturers to provide guidelines for the most effective degradation pathways employed for minimal environmental impact.

Evaluation of the Shelf Life of Myristica-fragrans Powder-Flavored Oils Obtained through the Application of Two Processes: Infusion and Co-Pressing Technology.

This work aimed to evaluate the impact of enrichment processing on the quality parameters, bioactivity and sensorial aspects of Myristica fragrans (mace)-flavored olive oil storage for one year. The mace powder was added to extra virgin olive oil through two different processes: immediately after crushing the olives by mixing mace (1% weight/weight (w/w)) with the olive paste (MAVOO-M) and by adding mace to extra virgin olive oil (C) (2% w/w) (MAVOO-I). A multi-analytical approach was applied to measure the main qualitative indexes, such as the free acidity, peroxide value and ultraviolet parameters. The total phenolic and carotenoid contents (TPC and TCC, respectively) and α-tocopherol were also evaluated, as well as the sensory attributes. The radical scavenging potential was estimated by using two different in vitro tests, namely, 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) and 2,2-diphenyl-1-picrylhydrazyl (DPPH). A significant increase in the free acidity parameter was found in all the flavored oils, and particularly in the MAVOO-M (1.27% oleic acid); at the same time, this oil was the sample with the lowest peroxide value (i.e., 9.68 meqO2/kg) after 360 days of storage. At the end of the storage, an increase in L* values was found in both the MAVOO-M and -I vs. the C (43.88 and 43.02, respectively, vs. 42.62). The TCC was strongly influenced by the addition of mace, especially when the infusion process was used. In fact, after one year of storage, the TCC in the MAVOO-I resulted in ~34.7% more than the MAVOO-M. A promising DPPH radical scavenging activity was observed independently by the applied aromatization process, with IC50 values of 19.77 and 17.80 µg/mL for the MAVOO-M and MAVOO-I, respectively. However, this activity decreased during storage, and a similar trend was observed using the ABTS test. In conclusion the infusion as enrichment methodology led to more promising results in terms of functionality compared with the co-mixing one.