Skeletal Class III phenotype: Link between animal models and human genetics: A scoping review.

This study aimed to identify evidence from animal studies examining genetic variants underlying maxillomandibular discrepancies resulting in a skeletal Class III (SCIII) malocclusion phenotype. Following the Manual for Evidence Synthesis of the JBI and the PRISMA extension for scoping reviews, a participant, concept, context question was formulated and systematic searches were executed in the PubMed, Scopus, WOS, Scielo, Open Gray, and Mednar databases. Of the 779 identified studies, 13 met the selection criteria and were included in the data extraction. The SCIII malocclusion phenotype was described as mandibular prognathism in the Danio rerio, Dicentrarchus labrax, and Equus africanus asinus models; and as maxillary deficiency in the Felis silvestris catus, Canis familiaris, Salmo trutta, and Mus musculus models. The identified genetic variants highlight the significance of BMP and TGF-ß signaling. Their regulatory pathways and genetic interactions link them to cellular bone regulation events, particularly ossification regulation of postnatal cranial synchondroses. In conclusion, twenty genetic variants associated with the skeletal SCIII malocclusion phenotype were identified in animal models. Their interactions and regulatory pathways corroborate the role of these variants in bone growth, differentiation events, and ossification regulation of postnatal cranial synchondroses.

Simultaneous labial and lingual augmented corticotomy assisted presurgical orthodontics in class III patients: the morphological aspects of the mandibular anterior ridge with cone-beam computed tomography.

OBJECTIVES: This study aims to investigate the changes in alveolar bone following the simultaneous performance of labial and lingual augmented corticotomy (LLAC) in patients with insufficient alveolar bone thickness on both the labial and lingual sides of the mandibular anterior teeth during presurgical orthodontic treatment. MATERIALS AND METHODS: Thirth-five surgical patients with skeletal Class III malocclusion were included: 19 (LLAC group) accepted LLAC surgery during presurgical orthodontic treatment, and 16 (non-surgery group, NS) accepted traditional presurgical orthodontic treatment. Cone-beam computed tomography (CBCT) scans were obtained before treatment (T0) and at the completion of presurgical orthodontic treatment (T1). The amount of vertical alveolar bone and contour area of the alveolar bone in the labial and lingual sides of mandibular incisors were measured. RESULTS: After presurgical orthodontic treatment, the contour area of the alveolar bone at each level on the lingual side and alveolar bone level on both sides decreased significantly in the NS group (P < 0.001). However, the labial and lingual bone contour area at each level and bone level increased significantly in the LLAC group (P < 0.001). The bone formation rate in the lingual apical region was the highest, significantly different from other sites (P < 0.001). CONCLUSIONS: During presurgical orthodontic treatment, LLAC can significantly increase the contour area of the labio-lingual alveolar bone in the mandibular anterior teeth to facilitate safe and effective orthodontic decompensation in skeletal Class III patients. CLINICAL RELEVANCE: This surgery has positive clinical significance in patients lacking bone thickness (< 0.5 mm) in the labial and lingual sides of the lower incisors.

Genetic change investigation in DOCK1 gene in an Iranian family with sign and symptoms of temporomandibular joint disorder (TMD).

OBJECTIVES: Temporomandibular joint disorder (TMD) is a complex condition with pain and dysfunction in the temporomandibular joint and related muscles. Scientific evidence indicates both genetic and environmental factors play a crucial role in TMD. In this study, we aimed to discover the genetic changes in individuals from 4 generations of an Iranian family with signs and symptoms of TMD and malocclusion Class III. MATERIALS AND METHODS: Whole Exome Sequencing (WES) was performed in 4 patients (IV-8, IV-9, V-4, and V-6) with TMD according to (DC/TMD), along with skeletal Class III malocclusion. Then, PCR sequencing was performed on 23 family members to confirm the WES. RESULTS: In the present study, WES results analysis detected 6 heterozygous non-synonymous Single Nucleotide Variants (SNVs) in 5 genes, including CRLF3, DNAH17, DOCK1, SEPT9, and VWDE. A heterozygous variant, c.2012T > A (p.F671Y), in Exon 20 of the DOCK1 (NM_001290223.2) gene was identified. Then, this variant was investigated in 19 other members of the same family. PCR-Sequencing results showed that 7/19 had heterozygous TA genotype, all of whom were accompanied by malocclusion and TMD symptoms and 12/19 individuals had homozygous TT genotype, 9 of whom had no temporomandibular joint problems or malocclusion. The remaining 3 showed mild TMD clinical symptoms. The 5 other non-synonymous SNVs of CRLF3, DNAH17, SEPT9, and VWDE were not considered plausible candidates for TMD. CONCLUSIONS: The present study identified a heterozygous nonsynonymous c.2012T > A (p.F671Y) variant of the DOCK1 gene is significantly associated with skeletal class III malocclusion, TMD, and its severity in affected individuals in the Iranian pedigree. CLINICAL RELEVANCE: The role of genetic factors in the development of TMD has been described. The present study identified a nonsynonymous variant of the DOCK1 gene as a candidate for TMD and skeletal class III malocclusion in affected individuals in the Iranian pedigree.

Tongue pressure and maxillofacial muscle activities during swallowing in patients with mandibular prognathism.

BACKGROUND: Coordination among lip, cheek and tongue movements during swallowing in patients with mandibular prognathism remains unclear. OBJECTIVES: This study aimed to identify the temporal sequences of tongue pressure and maxillofacial muscle activities during swallowing in patients with mandibular prognathism and compared characteristics with those of healthy volunteers. METHODS: Seven patients with mandibular prognathism (mandibular prognathism group) and 25 healthy volunteers with individual normal occlusion (control group) were recruited. Tongue pressures and masseter, orbicularis oris, mentalis and supra- and infrahyoid muscle activities while swallowing gel were measured simultaneously using a sensor sheet system with five measurement points and surface electromyography, respectively. Onset time, offset time and durations of tongue pressure and muscle activities were analysed. RESULTS: In the mandibular prognathism group, tongue pressure was often produced first in more peripheral parts of the palate. Offset of tongue pressure in the posteromedian and peripheral parts of the palate and maxillofacial muscle activities except for orbicularis oris were delayed. Duration of tongue pressure in the anteromedian part of the palate was significantly shorter and durations of masseter, mentalis and suprahyoid muscle activities were significantly longer. Times to onset of orbicularis oris and suprahyoid muscle activities based on first onset of tongue pressure were significantly shorter. CONCLUSION: These results suggest that patients with mandibular prognathism may exhibit specific patterns of tongue pressure production and maxillofacial muscle activities during swallowing.

Maxillofacial growth changes after maxillary protraction therapy in children with class III malocclusion: a dual control group retrospective study.

PURPOSE: To investigate the balance between post-treatment effect and continued nature growth after maxillary protraction treatment in patients with skeletal class III malocclusion. METHODS: 31 patients aged 8.79 ± 1.65 years with skeletal Class III malocclusion had been treated with maxillary protraction and the treatment lasted an average of 1.16 years. The average observation duration after treatment in the maxillary protraction group was 2.05 ± 0.39 years. In the control groups, a sample of 22 patients (9.64 ± 2.53 years) with untreated skeletal class III malocclusion and 24 patients (9.28 ± 0.96 years) with skeletal class I malocclusion were matched to the treatment group according to age, sex and observation period. The mean observation interval of the control groups was 2.39 ± 1.29 years in the class III group and 1.97 ± 0.49 years in the class I group. RESULTS: The active orthopedic treatment effect showed a opposite trend to the natural craniomaxillofacial growth effect after treatment in many aspects. In the observation duration of treatment group, decrease in ANB, Wits appraisal and BAr-AAr were statistically significant compared to class I control group (p < 0.001), and there was a significant increase in NA-FH (P < 0.001) which was contrary to class III control group. Treatment group presented a significant increase in Gn-Co (P < 0.01) and Co-Go (P < 0.001), except for changes in the extent of the mandibular base (Pog-Go, P = 0.149) compared to class I control group. The vertical maxillomandibular skeletal variables (Gonial; MP-SN; MP-FH; Y-axis) in treatment group decreased significantly compared to those in class III control group (P < 0.01). U1-SN and L1-MP showed a significant increase, which was similar to the class I group (P > 0.05), and overjet decreased significantly relative to both of the two control groups (P < 0.05). CONCLUSION: Maxillary protraction therapy led to stable outcomes in approximately 77.42% of children with Class III malocclusion approximately 2 years after treatment. Unfavorable skeletal changes were mainly due to the greater protrusion of the mandible but maxillary protraction did have a certain degree of postimpact on the mandibular base. Protraction therapy does not fundamentally change the mode of maxillary growth in Class III subjects except for the advancement of the maxilla. Craniomaxillofacial region tend to restabilize after treatment and lead to skeletal growth rotation and more dentoalveolar compensation.

Genetic architecture of non-syndromic skeletal class III malocclusion.

Non-syndromic skeletal Class III malocclusion is a major craniofacial disorder characterized by genetic and environmental factors. Patients with severe skeletal Class III malocclusion require orthognathic surgery to obtain aesthetic facial appearance and functional occlusion. Recent studies have demonstrated that susceptible chromosomal regions and genetic variants of candidate genes play important roles in the etiology of skeletal Class III malocclusion. Here, we provide a comprehensive review of our current understanding of the genetic factors that affect non-syndromic skeletal Class III malocclusion, including the patterns of inheritance and multiple genetic approaches. We then summarize the functional studies on related loci and genes using cell biology and animal models, which will help to implement individualized therapeutic interventions.

Structural and functional changes of nasal cavity and maxillary sinus in patients with skeletal class III malocclusion 1 year after bimaxillary surgery.

PURPOSE: This study aimed to analyse changes in the nasal cavity and maxillary sinus structure and function in patients with skeletal class III malocclusion 1 year after bimaxillary surgery. MATERIALS AND METHODS: In this study, cone-beam computed tomography (CBCT) images of 20 patients (10 men and 10 women; mean age 24.3 ± 3.4 years) with skeletal class III malocclusion who underwent Le Fort I osteotomy and bilateral sagittal split osteotomy were obtained before and 1 year after the surgery. CBCT data were stored opened with element 3D (E3D) to establish a nasal airway model (the paranasal sinus includes only the maxillary sinus). Ansys (ANSYS) software is used for simulation and analysis. RESULTS: The maxillary sinus and nasal cavity volumes decreased significantly 1 year after the surgery. After surgery, the volume of nasal cavity decreased by 13.5%, and the average volume of maxillary sinus decreased by 7.8%. There was no significant difference in the degree of deviation of the septum and nasal cavity resistance, and air distribution in the maxillary sinus did not change. The nasal cavity wall shear stress change was similar to that before surgery. CONCLUSIONS: The maxillary sinus volume and nasal cavity volume of patients with skeletal class III malocclusion changed significantly after bimaxillary surgery, but there was no significant change in nasal ventilation function 1 year after surgery.

Does cleft lip and palate affect the severity of malocclusion?

OBJECTIVE: The purpose of this study was to evaluate the 3D anatomical features of unilateral (UCLP) and bilateral (BCLP) complete cleft lip and palate with those of skeletal Class III dentofacial deformities. MATERIALS AND METHODS: In total, 92 patients were divided into cleft and noncleft groups. The cleft group comprised 29 patients with UCLP and 17 patients with BCLP. The noncleft group comprised 46 patients with Class III dentofacial deformities. 3D anatomical landmarks were identified and the corresponding measurements were made on the cone-beam computed tomography (CBCT). RESULTS: The differences between the affected and unaffected sides of the patients with UCLP were nonsignificant. The differences between the patients with UCLP and BCLP were nonsignificant except for the SNA angle. Significant differences between the patients with clefts and Class III malocclusion were identified for the SNA, A-N perpendicular, and A-N Pog line, indicating that the maxillae of the patients in the cleft group were more retrognathic and micrognathic. Relative to the noncleft group patients, the cleft group patients had a significantly smaller ramus height. CONCLUSION: The affected and unaffected sides of the patients with UCLP did not exhibit significant differences. The maxillae of the patients with UCLP were significantly more retrognathic than those of the patients with BCLP. The maxillae and mandibles of the patients in the cleft group were more micrognathic and retropositioned relative to those of the noncleft Class III patients. CLINICAL RELEVANCE: The maxillary and mandibular findings indicated greater deficiencies in the patients with UCLP or BCLP than in those with skeletal Class III malocclusion. Appropriate surgical design should be administered.

Evaluation of soft tissue prediction accuracy for orthognathic surgery with skeletal class III malocclusion using maxillofacial regional aesthetic units.

OBJECTIVES: This study aimed to evaluate the soft tissue prediction accuracy of patients undergoing orthognathic surgery to correct skeletal class III malocclusion using maxillofacial regional aesthetic units. MATERIALS AND METHODS: Pre- and postoperative cone-beam computed tomography (CBCT) and 3D facial scans were taken for 58 patients who had undergone orthognathic surgery. The preoperative 3D facial scan was integrated with the preoperative CBCT using ProPlan CMF software. The software simulated the surgery and generated postoperative soft tissue prediction. The simulated 3D facial scan was then compared with the actual 3D facial scan obtained at least 6 months after the surgery by the maxillofacial regional aesthetic units and the facial soft tissue landmark points. RESULTS: The anatomical regions of the upper lip, lower lip, chin, right external buccal and left external buccal prediction were above 2.0 mm. As for the soft tissue landmarks, at chl, chr, ls, stm and li, the position of predicted scan was higher than that of the actual postoperative scan. CONCLUSIONS: The accuracy of 3D soft tissue predictions using ProPlan CMF software in Skeletal III patients was clinically satisfactory according to maxillofacial regional aesthetic units combined with facial soft tissue landmark points. However, the accuracy of prediction still needed improvement in some areas. CLINICAL RELEVANCE: The accuracy of soft tissue prediction can be analyzed more clearly through maxillofacial regional aesthetic units so that clinicians have a deeper understanding of the use of the software to predict soft tissue change after orthognathic surgery.

A cross-sectional study on three-dimensional compensatory characteristics of maxillary teeth in patients with different types of skeletal Class III malocclusion with mandibular asymmetry.

OBJECTIVE: The purpose of this study was to analyze three-dimensional dental compensation in patients with different types of skeletal Class III malocclusion with mandibular asymmetry, using cone-beam computed tomography (CBCT) and three-dimensional reconstruction measurement technology, thereby providing clinical guidance and reference for combined orthodontic and orthognathic treatment. METHODS: 81 patients with skeletal Class III malocclusion with mandibular asymmetry were selected in accordance with the inclusion criteria. According to a new classification method based on the direction and amount of menton deviation relative to ramus deviation, patients were divided into three groups called Type 1, Type 2, and Type 3. In Type 1, the direction of menton deviation was consistent with that of ramus deviation and the amount of menton deviation was greater than that of ramus deviation. In Type 2, the direction of menton deviation was consistent with that of ramus deviation and the amount of menton deviation was smaller than that of ramus deviation. In Type 3, the direction of menton deviation was inconsistent with that of ramus deviation. The maxillary occlusal plane (OP), anterior occlusal plane (AOP), and posterior occlusal plane (POP) were measured on reconstructed CBCT images. The vertical, transverse, and anteroposterior distances from maxillary teeth to reference planes and the 3D angles between the long axis of these teeth and reference planes were measured. These dental variables measured from the deviated and non-deviated sides were compared within each group, as well as among each other. RESULTS: Of the 81 patients with asymmetrical Class III malocclusion, 52 patients were categorized in Type 1, 12 patients in Type 2, and 17 patients in Type 3. There were significant differences between deviated and non-deviated sides in Type 1 and Type 3 (p < 0.05). In Type 1, the vertical distances of maxillary teeth on the deviated side were lower than those on the non-deviated side, and AOP, OP, and POP on the deviated side were larger than those on the non-deviated side (p < 0.05). In Type 3, the vertical distances of the maxillary teeth on the deviated side were lower (p < 0.05), and the AOP and OP on the deviated side were larger than those on the non-deviated side. In all three groups, the transverse distances of the maxillary teeth from the mid-sagittal plane on the deviated side were larger than those on the non-deviated side (p < 0.05), and the angles between the long axis of maxillary teeth and the mid-sagittal plane on the deviated side were larger, respectively (p < 0.05). CONCLUSIONS: The maxillary teeth on the deviated side were observed to have smaller eruption heights in Type 1 and Type 3. In Type 1, AOP, POP, and OP were greater on the deviated side, while in Type 3, only AOP and OP were greater on the deviated side. The maxillary teeth of patients in all three groups on the deviated side were buccal and buccally inclined. Larger sample observations are still needed to further verify these findings.

Comparison of Different Decompensation Approaches on Facial Profile in Orthodontic-Orthognathic Treatment for Skeletal Class III Patients.

BACKGROUND: The objective of the present study was to assess the hard and soft tissue differences of skeletal Class III malocclusion patients treated with orthodontic-orthognathic surgery treatment between two decompensation approaches including extraction of maxillary premolars in preoperative orthodontics and clockwise rotation of the maxilla in orthognathic surgery. METHODS: 22 skeletal Class III patients with the crowding of maxillary dental arch less than 3mm were included in this study. These patients were divided into two groups: extraction group and non-extraction group. Lateral cephalograms taken before preoperative orthodontic treatment and after postoperative orthodontic treatment were used to analyze the differences of hard and soft tissues between two groups. Independent t test was used to evaluate the differences of variables between extraction group and non-extraction group. RESULTS: After treatment, there was significant difference of Wits between extraction group and non-extraction group (- 4.34 mm vs - 2.82 mm, respectively, P <0.05). Co-Gn was significantly greater in non-extraction group than in extraction group (77.18 mm vs 71.58 mm, P <0.05). U1-SN and L1-MP in extraction group were significantly closer to the normal values than non-extraction group (P <0.05). Regarding the change of variables before and after orthodontic-orthognathic treatment, NLA (7.25° vs 1.46°, P <0.01) and G-Sn-Pog' (8.06° vs 4.62°, P <0.05) were significantly greater in extraction group than in non-extraction group. CONCLUSION: For patients with skeletal Class III malocclusion, extraction of maxillary premolars in preoperative orthodontic treatment can more effectively eliminate the dental compensation and achieve a more harmonious facial profile compared to clockwise rotation of the maxilla in orthognathic surgery. LEVEL OF EVIDENCE IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Quantification of pharyngeal airway space changes after two-jaw orthognathic surgery in skeletal class III patients.

BACKGROUND: Skeletal class III malocclusion is a common dentofacial deformity. Orthognathic treatment changes the position of the jaws and affects the shape of the upper airway to some extent. The aim of this study was to use multislice spiral computer tomography data and orthognathic knowledge to quantify the relationship between the amount of surgical movement of the maxilla or mandible in all three spatial planes and the changes in airway volume that occurred. METHODS: A retrospective study of 50 patients was conducted. Preoperative and postoperative linear changes related to skeletal movements of the maxilla and mandible were measured and compared to changes in the most constricted axial level (MCA) and its anteroposterior (MCA-AP) and transverse diameters (MCA-TV). Correlation tests and linear regression analysis were performed. RESULTS: Significant interactions were observed between the anterior vertical movement of the maxilla and the MCA-AP. The anteroposterior movement distance of the mandible was significantly correlated with changes in the oropharyngeal, velopharyngeal, total airway volume, MCA, MCA-AP, and MCA-TV. The change in the mandibular plane angle was significantly correlated with the change in velopharyngeal volume, total airway volume (nasopharynx, oropharynx, velopharynx), and MCA. The linear regression model showed that oropharyngeal volume decreased by 350.04 mm3, velopharyngeal volume decreased by 311.50 mm3, total airway volume decreased by 790.46 mm3, MCA decreased by 10.96 mm2 and MCA-AP decreased by 0.73 mm2 when point B was setback by 1 mm. CONCLUSIONS: Anteroposterior mandibular control is the key to successful airway management in all patients. This study provides estimates of volume change per millimeter of setback to guide surgeons in treatment planning.

Comprehensive positional and morphological assessments of the temporomandibular joint in adolescents with skeletal Class III malocclusion: a retrospective CBCT study.

BACKGROUND: Condyle-fossa relationships in adolescents with skeletal Class III malocclusion remain unclear. Therefore, this study used cone-beam computed tomography (CBCT) to evaluate the position and morphology of the temporomandibular joint (TMJ) in adolescents with skeletal Class III malocclusion. METHODS: In this cross-sectional retrospective study, CBCT images from 90 adolescents with skeletal Class III malocclusion and 30 controls were analysed. Adolescents with skeletal Class III malocclusion were divided into different groups based on (1) sex (male and female), (2) sides (right and left), (3) age (early, middle, and late adolescence), and (4) vertical skeletal patterns (hyperdivergent, normodivergent, and hypodivergent). Morphology of the condyle and fossa as well as condylar position, was compared among groups. Data were collected and submitted for statistical analysis. This study adheres to STROBE guidelines. RESULTS: Regarding the intergroup comparisons, there were significant differences in TMJ position and morphology between the skeletal Class III malocclusion with different vertical skeletal patterns and control groups (P < 0.05). Within groups, condyle-fossa relationships differed significantly according to sex, age, and vertical skeletal patterns (P < 0.05); however, the mean values were not statistically different between left and right sides in adolescents with skeletal Class III malocclusion. CONCLUSIONS: Our findings can be used clinically and radiographically to evaluate the condyle and glenoid fossa features in adolescents with skeletal Class III malocclusion, providing a basis for better TMD diagnosis and orthodontic treatment.

A novel maxillary transverse deficiency diagnostic method based on ideal teeth position.

BACKGROUND: This study proposed a novel maxillary transverse deficiency diagnostic method and evaluated the skeletal Class I and the mild skeletal Class III groups. METHODS: Pre-treatment data from 30 mild skeletal Class III and 30 skeletal Class I patients were collected and uploaded to the Emeiqi Case Management System to design the ideal teeth positions. On these positions, the first bi-molars width was measured at the central fossa and center resistance, the maxillary first bi-premolars width was measured at the central fossa, and the mandibular first bi-premolars width was measured at the distal contact point by Mimics, then width differences of two groups were calculated respectively. RESULTS: At ideal teeth positions, there was no statistically significant difference in the maxillomandibular width in the premolar area between the two groups, but there was in the molar area, and this difference was caused by the difference in mandible width between the two groups. CONCLUSIONS: We proposed a new transverse diagnostic method and found that even the Class I group was not quite up to standard in the molar area on ideal teeth positions, and the Class III group had more severe maxillary transverse deficiency than the Class I group. Meanwhile, the maxillary transverse deficiency in the Class III group was mainly caused by the larger width of the mandible.

Surgery-first treatment of a skeletal Class III malocclusion with a completely digital workflow.

Completely digital design/completely digital manufacturing (CDD/CDM) workflows have been widely used in orthodontic and orthognathic treatments. This case report introduces a CDD/CDM workflow consisting of clear aligners and virtual planning for a surgery-first approach (SFA) in a patient with a skeletal Class III malocclusion. Following a shortened treatment time of 5 months, the patient's facial appearance improved significantly, and well-balanced occlusion was obtained. SFAs with clear aligners can enable patients to achieve complete esthetic satisfaction during the therapeutic period. The CDD/CDM workflow provided accurate results, improved the clinical outcome, and reduced treatment time.

The Stability Guided Multidisciplinary Treatment of Skeletal Class III Malocclusion Involving Impacted Canines and Thin Periodontal Biotype: A Case Report with Eight-Year Follow-Up.

Skeletal class III malocclusion with severe skeletal disharmonies and arch discrepancies is usually treated via the conventional orthodontic-surgical approach. However, when associated with tooth impaction and periodontal risks, the treatment is more challenging and complex. The esthetic, occlusal, and periodontal stability of the treatment outcome is more difficult to obtain. The 16-year-old female patient in this case was diagnosed with dental and skeletal Class III malocclusion, bilateral impacted maxillary canines, and scalloped thin gingiva. The multidisciplinary management included a segmental arch technique, extracting two premolars, a subepithelial connective tissue graft surgery, and orthognathic surgery. The esthetic facial profile, pleasant smile, appropriate occlusion, and functional treatment results were obtained and maintained in 8-year follow-up.

Morphometric evaluation of the alveolar bone around central incisors during surgical orthodontic treatment of high-angle skeletal class III malocclusion.

OBJECTIVES: To evaluate morphometric characteristics of alveolar bone around the incisors of high-angle skeletal class III patients receiving surgical orthodontic treatment. SETTING AND SAMPLE POPULATION: Thirty high-angle skeletal class III patients (mean age, 20.94 ± 3.25 years) underwent cone-beam computed tomography before treatment (T0), after pre-surgical orthodontic treatment (T1) and after treatment (T2). MATERIALS AND METHODS: The vertical bone level (VBL), alveolar bone thickness (ABT), alveolar bone area (ABA) and position of upper and lower central incisors (UCIs and LCIs) were evaluated. The ABT included five levels (4, 6, 8 mm from the cemento-enamel junction, midroot and root apex level). One-way repeated measures ANOVA with Bonferroni's multiple-comparison test and matched t test was performed to compare variables. RESULTS: Before treatment, the average labial ABT was approximately 1 mm in UCIs and 0.38 ~ 0.79 mm in LCIs, and the VBL of the LCIs was over 2 mm. After treatment, the VBL increased by 2.19 ± 1.96 mm (P < .001) on the lingual side of UCIs and 2.78 ± 2.29 mm and 3.09 ± 2.52 mm on the labial and lingual sides of LCIs, respectively (all P < .001). ABT at every level decreased significantly, decreasing by 1.66 ± 1.93 mm at the 8 mm level of UCIs and 1.06 ± 1.01 mm at the apex of LCIs (P < .001). The lingual ABA of UCIs and LCIs decreased by over 50% (P < .001). CONCLUSIONS: In high-angle skeletal class III patients, the condition of alveolar bone around UCIs and LCIs was extremely poor before treatment. Further alveolar bone resorption occurred during surgical orthodontic treatment. More attention should be paid to the movement of anterior teeth in cases of severe alveolar bone loss.

Genetic factors contributing to skeletal class III malocclusion: a systematic review and meta-analysis.

OBJECTIVES: The present systematic review aims to report and critically assess the findings of the available scientific evidence from genetic association studies examining the genetic variants underlying skeletal class III malocclusion and its sub-phenotypes. MATERIAL AND METHODS: A pre-piloted protocol was registered and followed. The PubMed, Scopus, WOS, Cochrane Library, Gray Open literature, and CADTH databases were explored for genetic association studies following PICOS-based selection criteria. The research was reported in accordance with PRISMA statement and HuGE guidelines. The Q-genie tool was applied to assess the quality of genetic studies. Meta-analysis of genetic association studies was done by means of Meta-Genyo tool. RESULTS: A total of 8258 articles were retrieved, of which 22 were selected for in-depth analysis. Most of the studies did not differentiate between sub-phenotypes, and the cohorts were heterogeneous regarding ethnicity. Four to five principal components of class III malocclusion explained the phenotypic variation, and gene variants at MYO1H(rs10850110), BMP3(rs1390319), GHR (rs2973015,rs6184, rs2973015), FGF7(rs372127537), FGF10(rs593307), and SNAI3(rs4287555) (p < .05) explained most of the variation across the studies, associated to vertical, horizontal, or combined skeletal discrepancies. Meta-analysis results identified a statistically significant association between risk of class III malocclusion of A allele of the FBN3 rs7351083 [OR 2.13; 95% CI 1.1-4.1; p 0.02; recessive model]. CONCLUSION: Skeletal class III is a polygenic trait substantially modulated by ethnicity. A multicentric approach should be considered in future studies to increase sample sizes, applying multivariate analysis such as PCA and cluster analysis to characterize existing sub-phenotypes warranting a deeper analysis of genetic variants contributing to skeletal class III craniofacial disharmony. CLINICAL RELEVANCE: Grasping the underlying mechanisms of this pathology is critical for a fuller understanding of its etiology, allowing generation of preventive strategies, new individualized therapeutic approaches and more accurate treatment planification strategies.

Analysis of facial features and prediction of lip position in skeletal class III malocclusion adult patients undergoing surgical-orthodontic treatment.

OBJECTIVES: This study presents a retrospective study aimed to analyze the facial features at each stage of surgical-orthodontic treatment for skeletal class III malocclusion, and predict the changes in the lips after treatment. MATERIALS AND METHODS: There were 49 skeletal class III malocclusion patients treated with bimaxillary surgery and orthodontic treatment enrolled in this study. Lateral cephalograms were obtained before treatment (T0), 1 month before surgery (T1), 1 month after surgery (T2), and after debonding (T3) for cephalometric measurements. After the measurement of the required variables, paired t-test, Pearson's correlation analysis, and multiple linear regression were performed using SPSS 19.0. RESULTS: The main factors associated with changes in the upper lip included ΔUIE-V, ΔA-V, ΔU1A-V, and ΔL1A-V, and those associated with changes in the lower lip included ΔLIE-V, ΔL1A-V, ΔB-V, ΔPog-V, and Δfacial angle. The predicted regression equation for the horizontal change in the upper lip was represented as ΔUL-vertical reference line (VRL) = 9.430 + 0.779 (ΔUIE-VRL) - 0.542(VULT) (P < 0.05) with a mean error of 1.04 mm; the corresponding equation for the lower lip was ΔLL-VRL = -1.670 + 0.530 (ΔB-VRL) + 0.360 (Ls-E) + 0.393 (ΔLIE-VRL) (P < 0.05), with a mean error of 1.51 mm. CONCLUSIONS: This study explored the relationship between orthognathic surgery and changes in the lips and obtained the predictive equations of lip position after treatment by using multiple linear regression, which likely offers a reference for prediction of soft tissue changes before surgical-orthodontic treatment in patients with skeletal class III malocclusion. CLINICAL RELEVANCE: The findings can help dentists to rapidly predict the lip changes after surgical-orthodontic treatment in patients with skeletal class III malocclusion. The study has been registered with the Chinese Clinical Trial Registration (No: ChiCTR1800017694).

Nomogram prediction of vulnerable periodontal condition before orthodontic treatment in the anterior teeth of Chinese patients with skeletal Class III malocclusion.

OBJECTIVE: To establish and verify models predictive of thin periodontal phenotype and alveolar fenestration/dehiscence in the anterior teeth of patients with skeletal Class III malocclusion. MATERIAL AND METHODS: Retrospective data of 669 anterior teeth (305 in maxillae and 364 in mandibles) from 80 patients with skeletal Class III malocclusion before augmented corticotomy were collected. Distribution of thin periodontal phenotype and alveolar fenestration and dehiscence were evaluated and their associations with potential influencing factors were explored using univariate and multivariate analyses. The predictive models were visualized as nomograms, the accuracy of which was tested by receiver operating curve analyses. RESULTS: Thin phenotype was associated with Mazza bleeding index, sex, tooth type, probing depth and width of keratinized gingiva (WKG). Labial dehiscence was associated with age, jaw, labial bone thickness, mandibular plane angle, sagittal root position (SRP), sex, tooth type, and WKG. Labial fenestration was associated with sex, tooth type, SRP, and periodontal phenotype. The areas under the curves of nomogram prediction models for periodontal phenotype, alveolar dehiscence, and alveolar fenestration were 0.84, 0.81, and 0.73, respectively. CONCLUSIONS: Female sex, lateral incisor, and limited WKG may be risk factors for thin periodontal phenotype. Age, canine, male sex, mandible, thin labial bone thickness, and root positioned against the labial plate may be risk factors for labial dehiscence; and female sex, thick phenotype, root positioned against the labial plate, lateral incisor, and canine may be risk factors for labial fenestration. The predictive performance of the models was acceptable.