Effect of functional appliances on sleep-disordered breathing in Class II division 1 malocclusion children: Randomized controlled trial.

OBJECTIVES: A randomized controlled trial was undertaken to investigate the orthopaedic effect of functional appliances on the pharyngeal airway space and nocturnal breathing of children with skeletal class II due to mandibular retrusion. MATERIALS AND METHODS: Forty patients were randomized into a 1:1 ratio study (Twin block) group and a control (fixed appliance) group. Each group included equal numbers of boys and girls. Diagnosis with sleep-disordered breathing was not an inclusion criterion. The duration of the trial was 12 months (T0 - T12). Eligibility criteria included skeletal Class II division 1 malocclusion with mandibular retrognathism, SNA ≥82, SNB ≤78, ANB ≥4, overjet ≥6 mm, and patients in circumpubertal stage CVM2 and CVM3. The main outcomes were pharyngeal airway volume, oxygen desaturation index (ODI), and maximum expiratory pressure (MEP), while the secondary outcomes were skeletal and dental changes of the maxilla and mandible. Randomization was accomplished with random blocks of 20 patients with allocation concealed in sequentially numbered, opaque, and sealed envelopes. Blinding was only applicable for data analysis of radiographic measurements and data extracted from the pulse oximeter. RESULTS: The mean age of the patients was 10 ± 1.5 and 10 ± 1.2 at (T0) for the Twin Block and the control groups, respectively. The changes in the oropharyngeal (2.66 cc and 0.056; P = .03) and nasopharyngeal (1.3 cc and 0.84; P = .053) airway volumes for the Twin block and control groups, respectively, were significantly different for the oropharynx. There was a significant decrease in ODI by [median -3.55 (-5.05 to 0.50); P ≤ .001] and a significant increase [median 45 (0.0-110); P ≤ .001] in MEP for the Twin block group. A significant inverse correlation (r = -.589; P = .006) could be found between the total volume of the oropharynx and ODI. No serious harm was observed. CONCLUSIONS: The Twin block group showed significant change in oropharyngeal airway volume and improvement of nocturnal breathing. REGISTRATION: This trial was registered at https://www. CLINICALTRIALS: gov, registration number NCT04255511.

The correlation analysis between incisal guidance angle and occlusal plane angles and temporomandibular joint morphology.

OBJECTIVES: The correlations between the incisal guidance angle (IGA) and occlusal plane angles and temporomandibular joint (TMJ) morphology were investigated in adults with skeletal Class II division II malocclusion. MATERIALS AND METHODS: CBCT images of 37 patients were analyzed. It included 19 cases of skeletal Class II division II malocclusion with low angle (study group) and 18 cases of skeletal Class I average angle (control group). The Invivo Dental 5 software was employed to acquire the data of the incisal guidance angle (IGA), occlusal plane angle (FH-OP), anterior occlusal plane angle (FH-AOP) and the TMJ measurement items. RESULTS: The results of IGA, FH-AOP angle and FH-OP angle showed the study group > the control group (P < 0.05). There were statistically difference in the condylar mediolateral diameters, articular eminence inclination and height, and posterior joint spaces between two groups. No differences were revealed in the condylar anteroposterior diameters, the condylar inclination angle, condylar head width and height, condylar length, glenoid fossa depth and width between two groups. In the study group, IGA showed a moderate correlation with FH-AOP, a weak correlation with FH-OP and condylar mediolateral diameters. Meanwhile, there was a correlation between FH-AOP, FH-OP, and TMJ indicators. CONCLUSIONS: The IGA was not only related to FH-AOP and FH-OP, but also to the condylar mediolateral diameters. In addition, there was a correlation between the occlusal plane angles and TMJ morphology in skeletal Class II division II low angle malocclusion. CLINICAL RELEVANCE: For patients with skeletal Class II division II low angle malocclusion, adjusting the IGA and the occlusal plane angles could improve the esthetic appearance of the anterior teeth, occlusal function, and TMJ morphology.

An automated method for assessing condyle head changes in patients with skeletal class II malocclusion based on Cone-beam CT images.

OBJECTIVES: Currently, there is no reliable automated measurement method to study the changes in the condylar process after orthognathic surgery. Therefore, this study proposes an automated method to measure condylar changes in patients with skeletal class II malocclusion following surgical-orthodontic treatment. METHODS: Cone-beam CT (CBCT) scans from 48 patients were segmented using the nnU-Net network for automated maxillary and mandibular delineation. Regions unaffected by orthognathic surgery were selectively cropped. Automated registration yielded condylar displacement and volume calculations, each repeated three times for precision. Logistic regression and linear regression were used to analyse the correlation between condylar position changes at different time points. RESULTS: The Dice score for the automated segmentation of the condyle was 0.971. The intraclass correlation coefficients (ICCs) for all repeated measurements ranged from 0.93 to 1.00. The results of the automated measurement showed that 83.33% of patients exhibited condylar resorption occurring six months or more after surgery. Logistic regression and linear regression indicated a positive correlation between counterclockwise rotation in the pitch plane and condylar resorption (P < .01). And a positive correlation between the rotational angles in both three planes and changes in the condylar volume at six months after surgery (P ≤ .04). CONCLUSIONS: This study's automated method for measuring condylar changes shows excellent repeatability. Skeletal class II malocclusion patients may experience condylar resorption after bimaxillary orthognathic surgery, and this is correlated with counterclockwise rotation in the sagittal plane. ADVANCES IN KNOWLEDGE: This study proposes an innovative multi-step registration method based on CBCT, and establishes an automated approach for quantitatively measuring condyle changes post-orthognathic surgery. This method opens up new possibilities for studying condylar morphology.

Evaluation of mandibular motion in adolescents with skeletal class II division 1 malocclusion during mandibular advancement using clear functional aligners: a prospective study.

BACKGROUND: This study aimed to evaluate the characteristics of mandibular protrusive condylar trajectory in adolescents with skeletal Class II Division 1 malocclusion and the changes of condylar trajectory during mandibular advancement (MA) treatment using clear functional aligners. METHODS: This prospective study consisted of a cross-sectional study and a longitudinal study. In cross-sectional study, sixty-one adolescents were divided into two groups: Class I (n = 30) and Class II Division 1 (n = 31). The condylar trajectory was measured and compared using the Mann-Whitney U test. The longitudinal study was the MA treatment group using clear functional aligner and consisted of 16 participants from Class II Division 1group. The condylar trajectory was collected at three-time points: pre-treatment (T1), during MA treatment at approximately 3 months (T2, 105.6 days average), and at the end of MA treatment (T3, 237.6 days average). The changes at T1, T2, and T3, as well as the symmetry between the left and right condyles across all groups, were examined using the Wilcoxon paired test. RESULTS: A greater increase in the anteroposterior displacement and space displacement during protrusive movements was observed in the Class II Division 1 group compared with that in the Class I group, with a large difference being observed in the left and right condylar movements. The condylar anteroposterior displacement and space displacement decreased significantly at T2 and increased significantly at T3; however, no significant difference was observed between T1 and T3. A significant difference was observed between the condylar movement on the left and right sides at T1; however, no significant difference was observed at T2 and T3. CONCLUSIONS: Adolescents with Class II Division 1 malocclusion had higher protrusive capacity than those with Class I. Moreover, their left and right condylar motion was more asymmetric. The range of condyle motion decreased first and then increased during MA therapy, and the left and right condyle movement became more symmetrical, which may be the adaptive response of neuromuscular function to the changes in jaw position.

Network analysis of three-dimensional hard-soft tissue relationships in the lower 1/3 of the face: skeletal Class I-normodivergent malocclusion versus Class II-hyperdivergent malocclusion.

BACKGROUND: The determining effect of facial hard tissues on soft tissue morphology in orthodontic patients has yet to be explained. The aim of this study was to clarify the hard-soft tissue relationships of the lower 1/3 of the face in skeletal Class II-hyperdivergent patients compared with those in Class I-normodivergent patients using network analysis. METHODS: Fifty-two adult patients (42 females, 10 males; age, 26.58 ± 5.80 years) were divided into two groups: Group 1, 25 subjects, skeletal Class I normodivergent pattern with straight profile; Group 2, 27 subjects, skeletal Class II hyperdivergent pattern with convex profile. Pretreatment cone-beam computed tomography and three-dimensional facial scans were taken and superimposed, on which landmarks were identified manually, and their coordinate values were used for network analysis. RESULTS: (1) In sagittal direction, Group 2 correlations were generally weaker than Group 1. In both the vertical and sagittal directions of Group 1, the most influential hard tissue landmarks to soft tissues were located between the level of cemento-enamel junction of upper teeth and root apex of lower teeth. In Group 2, the hard tissue landmarks with the greatest influence in vertical direction were distributed more forward and downward than in Group 1. (2) In Group 1, all the correlations for vertical-hard tissue to sagittal-soft tissue position and sagittal-hard tissue to vertical-soft tissue position were positive. However, Group 2 correlations between vertical-hard tissue and sagittal-soft tissue positions were mostly negative. Between sagittal-hard tissue and vertical-soft tissue positions, Group 2 correlations were negative for mandible, and were positive for maxilla and teeth. CONCLUSION: Compared with Class I normodivergent patients with straight profile, Class II hyperdivergent patients with convex profile had more variations in soft tissue morphology in sagittal direction. In vertical direction, the most relevant hard tissue landmarks on which soft tissue predictions should be based were distributed more forward and downward in Class II hyperdivergent patients with convex profile. Class II hyperdivergent pattern with convex profile was an imbalanced phenotype concerning sagittal and vertical positions of maxillofacial hard and soft tissues.

Combined Periodontal-Orthodontic Treatment with Periodontal Corticotomy Regenerative Surgery in an Adult Patient Suffering from Periodontitis and Skeletal Class II Malocclusion: A Case Report with 5-Year Longitudinal Observation.

A thick periodontal phenotype with thick gingiva and alveolar bone volume is required for safe orthodontic tooth movement and long-term stability. A high incidence of dehiscence and fenestration in the labial aspect of mandibular anterior teeth may limit the correction of deformity and orthodontic treatment, especially when the lower anterior teeth are needed to have a large range of movement. This study reports a combination of periodontal therapy and orthodontic therapy with periodontal corticotomy regenerative surgery (PCRS) in a 25-year-old patient suffering from skeletal Class II malocclusion and periodontitis. The patient received periodontal therapy 5 years ago and commenced orthodontic treatment 4.5 years ago. During the 4 years of follow-up for PCRS, the clinical and radiographic evaluations revealed significant improvements in the periodontal phenotype of the mandibular anterior region. The periodontal phenotypes in the mandibular incisors region were all modified from thin to thick. Supplementing orthodontic treatment with labial PCRS could be a promising treatment strategy to maintain long-term periodontal health in adult patients with alveolar deficiency and thin gingiva tissue.

Comparison of linear distance of glenoid fossa to frontomaxillary nasal suture in skeletal Class-II and skeletal Class-I malocclusion.

Objective: To compare linear distance of glenoid fossa to frontomaxillary nasal suture in skeletal Class-I and II malocclusions. Methods: This cross-sectional study was conducted at the Department of Orthodontics, Altamash Institute of Dental Medicine, Karachi Pakistan. The duration of study was one year from January, 2019 to January, 2020. After taking informed consent from patient and hospital ethical committee a total of 60 patients were included in the study using WHO sample size calculator. Two groups comprising 30 patients each i.e., Skeletal Class-I malocclusion and Skeletal Class-II malocclusion with mandibular retrusion both having normal vertical relationship were included in the study. The cephalometric measurements SNA, SNB, SNMP, FHMP, GF-FMN, CO-GO, CO GN on lateral cephalograms were measured and compared between the two groups. Independent t test was applied and p value ≤ 0.05 was considered as significant. Results: In skeletal Class-I malocclusion the mean linear distance of GF-FMN was 70.2 ± 4.02 mm and in skeletal Class-II malocclusion it was 73.4 ± 4.04 mm (p value .004). Glenoid fossa was 3.2 mm distally placed in patients with Class-II malocclusion. Conclusion: Glenoid fossa position is a diagnostic feature of Class-II malocclusion associated with mandibular retrusion. One of the effective cephalometric measurements to check glenoid fossa position is the distance from the glenoid fossa(GF) to the frontomaxillary nasal suture FMN (GF-FMN).

Differences in the effects of orthodontic treatment on airway-craniocervical functional environment in adult and adolescent patients with skeletal class II high-angle: a retrospective pilot study.

INTRODUCTION: This retrospective cohort study aimed to compare the change in upper airway and craniocervical posture after orthodontic treatment between adolescent and adult patients with Class II high-angle malocclusion. METHODS: A total of 12 adolescent (mean ± standard deviation age = 13.0 ± 2.0 years) and 12 adult patients with Class II high-angle malocclusion (mean ± standard deviation age = 23.7 ± 6.4 years) were selected in this study. The lateral cephalograms and cone beam computed tomography images of adolescent and adult patients were taken before and after treatment, which can be employed to evaluate the variables of craniofacial morphology, upper airway, and craniocervical posture through paired t tests, respectively. An independent sample t test was performed to observe the differences between two groups after orthodontic intervention. For adults and adolescents, the correlation between craniofacial morphology, upper airway, and craniocervical posture was determined through Pearson correlation analysis. RESULTS: In all subjects, the improvements in vertical and sagittal facial morphology after treatment were observed. Anterior and inferior movements of the hyoid bone, an increase of upper airway dimension, posterior tipping of the head and a reduction of cervical inclination in the lower and middle segments post-treatment were identified in adolescence (P < 0.05). Adults displayed anterior movements of the hyoid bone, whereas no significant difference was observed in upper airway dimension and craniocervical posture (P < 0.05). Notable differences were identified in the change of hyoid position and airway volume between two groups (P > 0.05). Mandibular plane inclination, growth pattern, occlusal plane inclination, and chin position were all significantly correlated with craniocervical posture in adolescent patients. Besides, the mandibular growth pattern and chin position in adult patients were significantly correlated with craniocervical posture (P < 0.05). CONCLUSIONS: Orthodontic treatment is capable of enhancing the facial profile of patients with skeletal class II high-angle while improving their upper airway morphology and craniocervical posture, where adolescents and adults differ substantially in that the former exhibit a more favorable alteration in the airway-craniocervical functional environment.

Comparison of invisalign mandibular advancement and twin-block on upper airway and hyoid bone position improvements for skeletal class II children: a retrospective study.

BACKGROUND: This study is to evaluate and compare the improvement of upper airway morphology and hyoid bone position in children with Class II mandibular retrusion treated with Invisalign mandibular advancement (MA) and Twin-Block (TB) appliances, utilizing cone beam computed tomography (CBCT). METHODS: 32 children aged between 8 and 11.5 years old were included in this study, with an average age of 10.2 years old. These children were divided into two groups, MA and TB, with 16 children in each group. Changes in upper airway morphology and hyoid bone position before and after treatment were analyzed using CBCT. RESULTS: (1) Changes in upper airway before and after treatment: the oropharynx volume (Or-V), the oropharynx minimum cross-sectional area (Or-mCSA), the hypopharynx volume (Hy-V), and the hypopharynx minimum cross-sectional area (Hy-mCSA) in both the MA and TB groups increased after treatment, and the differences were statistically significant (P < 0.05) compared to pre-treatment status. (2) Changes in hyoid bone position before and after treatment: The distances between H point and third cervical vertebra (H-C3), H point and pogonion (H-RGN), H point and mandibular plane (H-MP), H point and Frankfort horizontal plane (H-FH), H and S point (H-S), and H point and palatal plane (H-PP) in both the MA and TB groups increased after treatment, and the differences were statistically significant (P < 0.05). CONCLUSION: Both MA and TB appliances effectively improved the structural narrowness of the upper airway and reduced respiratory resistance, thus improving breath quality. However, MA showed more effectiveness in improving the narrowest part of the hypopharynx compared to TB. Both appliances also promoted anterior downward movement of the hyoid bone, which opens the upper airway of the oropharynx and hypopharynx and helps the upper airway morphology return to normal range.

Two-phase orthodontic treatment of a patient with a low-angle skeletal class II malocclusion: a 7-year follow-up.

Low-angle skeletal class II malocclusions are often observed with sagittal and vertical developmental abnormalities of the mandible. Two-phase orthodontic treatment of functional orthopedic therapy combined with fixed correction is one of the most common methods to treat of skeletal class II malocclusions. This case report describes the two-phase orthodontic treatment of a patient with severe low-angle skeletal class II malocclusion. A Twin Block orthodontic appliance was used to improve mandibular growth, and the adjustment of the occlusal relationship using a fixed appliance after functional therapy. After treatment, a significant improvement was observed in the patient's facial appearance and occlusal relationship. Additionally, a 7-year follow-up confirmed the stability of the treatment results. Although a vertical facial growth direction is difficult to control, the Twin Block orthodontic appliance in adolescents might effectively improve the difference in the sagittal growth of the mandible. Whilst the growth pattern could not be fully controlled, the treatment significantly improved the patient's facial profile and occlusion.

Correction of Severe Skeletal Class II High Angle with Mandibular Retrusion and Gummy Smile by Double-Jaw Surgery.

This report describes the treatment of severe skeletal Class II malocclusion in a young woman with a gummy smile and pronounced lower anterior facial height. Overjet and overbite were +12.0 mm and -1.0 mm, respectively. Cephalometric analysis revealed inferior positioning of the maxilla and severe mandibular retrusion with clockwise rotation. Both the upper and lower anterior teeth showed labial inclination. Based on a diagnosis of a skeletal Class II high angle with mandibular retrusion and a gummy smile, double-jaw orthognathic surgeries for upper and lower premolar extraction were chosen to gain ideal occlusion and an improvement in the esthetic facial profile. Le Fort I osteotomy was performed to move the anterior and posterior teeth upward by 4.0 mm and achieve mandibular counterclockwise rotation. Short lingual sagittal split ramus osteotomy was performed to move the mandible forward by 3.0 mm. As a result, normal overjet and overbite were achieved together with a straight profile and a good smile. After surgery, electromyographic evaluation of anterior temporal muscle activity showed an improvement in the percentage overlapping coefficient value (a symmetric index of bilateral muscle activity) from 28.1% to 63.2% compared to at pre-treatment. The pattern of jaw movement also showed an improvement. These results suggest that orthognathic surgery in skeletal Class II cases can improve not only malocclusion and the skeletal relationship of the jaws, but also masticatory function and jaw movement.

Maxillary sinus dimensions in skeletal class II population with different vertical skeletal patterns.

OBJECTIVES: The location of the maxillary sinus significantly affects the orthodontic treatment, particularly when temporary anchorage devices (TADs) are taking place. The current study aims to evaluate the maxillary sinus size and location in a skeletal class II population. MATERIALS AND METHODS: The pre-orthodontic treatment CBCT images of the skeletal class II population were selected. The sinus's volumetric size, height, width, and depth were measured and compared among different skeletal vertical patterns and between genders. In addition, the height and width of the alveolar bone surrounding the maxillary sinus floor were quantified in the same manner. RESULTS: Patients who displayed a high-angle skeletal pattern had significantly greater maxillary sinus dimensions, shorter vertical distance between the maxillary sinus floor and the alveolar bone crest, and thinner alveolar bone surrounding the maxillary sinus. Meanwhile, the maxillary sinus dimension measurements were positively correlated with the SN-MP angle in both genders but only correlated with ANB angle in females. On the other hand, the vertical distance between the maxillary sinus floor and the alveolar bone crest was negatively correlated with the SN-MP angle in males but the ANB angle in females. CONCLUSIONS: In the skeletal class II population, the high-angle patients faced a higher risk of maxillary sinus perforations by TADs. In addition, gender-related variations were noticed warranting clinical attention, as males have a higher potential for maxillary sinus penetration from TAD placement than females. CLINICAL RELEVANCE: Maxillary posterior alveolar TADs are often prescribed to achieve the distalization of maxillary posterior teeth in class II patients. The current study provided more insight into the "safe zone" for TAD placement related to the maxillary sinus.

Camouflage orthodontic treatment combined with genioplasty distraction osteogenesis for skeletal class II relationship secondary to osteosarcoma excision surgery.

OBJECTIVE: The treatment of orthodontic patients who survive head and neck tumors is challenging because of dentoskeletal deformities and other unexpected dental and facial complications. This case report describes the case of a 26-year-old woman who presented with mandibular retrognathia after survival from osteosarcoma. CLINICAL CONSIDERATIONS: Camouflage orthodontic treatment was chosen instead of combined orthodontic-orthognathic surgery after primary reconstructive surgery with an iliac bone graft. Genioplasty distraction osteogenesis (DO) was performed to achieve an optimal facial profile. Although unexpected condyle dislocation and epithelial hyperplasia occurred during treatment, a favorable facial profile and optimal skeletal and dental relationships were accomplished after 32 months of treatment. CONCLUSIONS: The patient underwent genioplasty DO and experienced unexpected left condyle dislocation. However, the treatment achieved esthetic goals after intermaxillary elastics were applied.

The effect of orthodontic vertical control on the changes in the upper airway size and tongue and hyoid position in adult patients with hyperdivergent skeletal class II.

BACKGROUND: At present, there are still controversies about the influence of orthodontic treatment on the size of upper airway and the position of hyoid bone. We investigated the effect of orthodontic vertical control therapy on the size of the upper airway and position of the tongue and hyoid bone in adult patients with hyperdivergent skeletal Class II. METHODS: Overall, 15 adults with hyperdivergent skeletal Class II and normal occlusion, respectively, were selected as the experimental and control groups. The angle and line of the craniofacial structure, upper airway, hyoid bone position and three-dimensional (3D) upper airway indexes were measured using the Uceph 4.2.1 standard version and Mimics 21.0 software, respectively. The paired t-test, Wilcoxon symbol rank test, t-test of two independent samples, two independent sample nonparametric tests, Mann-Whitney U test, Pearson correlation analysis, the Univariate linear regression analysis and Multiple linear regression analysis were performed. RESULTS: After treatment, the S-Go/N-Me (%) and the MP-SN and XiPm-SN angles were significantly different (P < 0.01). The U-MPW and PAS significantly increased (P < 0.05), sagittal diameter L2 increased significantly, and transverse diameter L2 decreased significantly (P < 0.01). Although no significant correlation was observed between the vertical change in the jaw and that in U-MPW and PAS, the sagittal diameter L2 showed a significant correlation (P < 0.05). The Multiple linear regression analysis showed that there was a significant negative correlation between the variables MP-SN and sagittal diameter L2 and positive correlation between S-Go/N-Me(%) and H-MP (P < 0.05). Furthermore, significant differences between the Hv (P < 0.01) and sagittal diameter L1(P < 0.05) were observed before and after treatment. CONCLUSIONS: After the orthodontic vertical control therapy in patients with hyperdivergent skeletal Class II, the upper airway only underwent adaptive changes during treatment without substantial size changes, the position of tongue body and hyoid bone did not change significantly. Furthermore, compared with normal occlusion, the velopharyngeal segment airway of patients with hyperdivergent skeletal Class II remains narrow and long after treatment.

Comparative Evaluation of Twin Block Appliance and Fixed Orthodontic Appliance in Early Class II Malocclusion Treatment: A Randomized Controlled Trial.

AIMS: To compare skeletal, dentoalveolar, and soft tissue changes between Twin block and early fixed orthodontic appliance for class II division 1 malocclusion treatment through a randomized controlled trial. MATERIALS AND METHODS: Sample and randomization: This study was a randomized controlled trial with a 1:1 allocation ratio in which 40 patients were divided equally into two groups: control and experimental; each group had an equal number of boys and girls. Randomization was achieved using random blocks of 20 patients with allocation concealed in sequentially numbered, opaque, and sealed envelopes. Blinding was only applicable for data analysis of radiographic measurements. Intervention: Twin block appliance was used in the experimental group for 1 year. However, control group was treated with fixed appliance. Inclusion criteria: Skeletal class II division 1 malocclusion with mandibular retrognathism; cephalometric angular measurements: SNA ≥ 82, SNB ≤ 78, ANB ≥ 4; overjet ≥6 mm; and patient in circumpubertal stage cervical vertebral maturation (CVM2 and CVM3). Parameters for evaluation: Cephalometric skeletal, dental, and soft tissue angular and linear measurements were used for evaluation. RESULTS: SNB increased remarkably by 4° in the Twin block group, but only by 0.68 in the control group. There was a significant decrease in vertical dimensions (SN-GoGn) in the Twin block group compared to control group (p = 0.002). Significant enhancement in the facial profile of the patients was observed. CONCLUSIONS: The Twin block appliance induced significant skeletal and dental changes. These changes were more obvious relative to the slight changes induced by natural growth. CLINICAL SIGNIFICANCE: Early treatment of Class II due to mandibular retrusion with Twin block functional appliance is recommended due to its favourable skeletal effect. Early treatment with fixed appliance affects mainly the dentoalveolar component. Long term follow-up is needed for further insights.

Dimensional and Positional Characteristics of the Temporomandibular Joint of Skeletal Class II Malocclusion with and without Temporomandibular Disorders.

AIM: This study sought to evaluate dimensional and positional temporomandibular joint (TMJ) features in three-dimensions in skeletal class II malocclusion with and without temporomandibular disorders (TMDs). MATERIALS AND METHODS: A total of 91 (182 joints) adult patients were divided into the following two groups: (1) Group I - TMD (n = 56; 112 joints) and (2) group II - non-TMD (n = 35; 70 joints). Dimensional and positional TMJ characteristics including glenoid fossae, mandibular condyles, and joint spaces were assessed using cone-beam computed tomography (CBCT). RESULTS: The mandibular fossa in the TMD group was significantly more lateral than in the non-TMD group, and the mandibular fossa anterior wall inclination to the horizontal plane showed a significantly more vertically inclined wall in the TMD group compared to the non-TMD group. Significantly vertical mandibular condylar changes in the form of less vertical inclination, more vertical position, and lower vertical dimension (height) in addition to more upward position within the joint space were found. The TMD group showed significantly decreased superior and posterior joint spaces in addition to significantly increased medial joint spaces. CONCLUSION: Patients with TMDs are associated with laterally positioned mandibular fossa with the more vertically inclined anterior wall. They are characterized by vertical mandibular condylar changes in the form of less vertical inclination, more vertical position, and lower vertical dimension (height) in addition to more upward positioning within the joint space is accompanied by a decrease in superior and posterior and an increase in medial joint spaces. CLINICAL SIGNIFICANCE: The TMJ characteristics of skeletal class II make it more susceptible to TMDs and any orthodontic and/or surgical interventions in a direction possibly change these characteristics are to be considered.

Effects of Orthodontic Functional Appliances in Relation to Skeletal Maturation of Cervical Vertebrae In Class II Malocclusion.

AIM: To evaluate the effects produced by functional orthodontic appliances at dental and skeletal level in relation to the level of skeletal maturation in class II patients Study design: Longitudinal and observational study Patients selected for the study had been wearing Sander Bite Jumping Appliance (SBJA) for at least 12 months; they were first diagnosed (T1) with skeletal class II according to Ricketts' cephalometric analysis, and had had lateral cephalograms taken before and after orthopaedic treatment (T2). Variables studied at T1 and T2 were: facial convexity, inclination of the upper and lower incisors, and facial depth. Results were compared between T1 and T2 for each variable and in relation to cervical maturation stage (CVS) according to the Lamparski analysis. Statistical analysis was performed using Shapiro-Wilk, t-student, Analysis of Variance (ANOVA) and multiple comparison tests, taking as statistically significant a p-value <0.05. RESULTS: A final sample of 235 patients was obtained. Statistically significant differences were found in the inclination of the mandibular incisors between T1 and T2 and among the different cervical stages when the functional appliances were placed in CVS1 (p = 0.000), CVS2 (p = 0.04) or CVS5 (p = 0.048). For the remaining variables, significant differences were also found between T1 and T2, but these differences were similar in all cervical stages. CONCLUSIONS: A significant proclination of the mandibular incisors was found when the functional appliance was placed during CVS1, CVS2, or CVS5. Time of placement of the functional appliances was not statistically significant for the remaining variables studied.

Genes and Pathways Associated with Skeletal Sagittal Malocclusions: A Systematic Review.

Skeletal class II and III malocclusions are craniofacial disorders that negatively impact people's quality of life worldwide. Unfortunately, the growth patterns of skeletal malocclusions and their clinical correction prognoses are difficult to predict largely due to lack of knowledge of their precise etiology. Inspired by the strong inheritance pattern of a specific type of skeletal malocclusion, previous genome-wide association studies (GWAS) were reanalyzed, resulting in the identification of 19 skeletal class II malocclusion-associated and 53 skeletal class III malocclusion-associated genes. Functional enrichment of these genes created a signal pathway atlas in which most of the genes were associated with bone and cartilage growth and development, as expected, while some were characterized by functions related to skeletal muscle maturation and construction. Interestingly, several genes and enriched pathways are involved in both skeletal class II and III malocclusions, indicating the key regulatory effects of these genes and pathways in craniofacial development. There is no doubt that further investigation is necessary to validate these recognized genes' and pathways' specific function(s) related to maxillary and mandibular development. In summary, this systematic review provides initial insight on developing novel gene-based treatment strategies for skeletal malocclusions and paves the path for precision medicine where dental care providers can make an accurate prediction of the craniofacial growth of an individual patient based on his/her genetic profile.

Comparison of mandibular cross-sectional morphology between Class I and Class II subjects with different vertical patterns: based on CBCT images and statistical shape analysis.

BACKGROUND: This study is aimed to (1) investigate the influence of sagittal and vertical patterns on mandibular cross-sectional morphology and to (2) provide visualized mandibular cross-sectional morphology in different groups with General Procrustes Analysis (GPA), canonical variance analysis (CVA) and discriminant function analysis (DFA). METHODS: 324 cone-beam computed tomography (CBCT) images were collected to analyze mandibular cross-sectional morphology and were categorized into 12 groups according to sagittal and vertical pattern and gender. One-way analysis of variance (ANOVA) was used to compare the difference among the groups. Thirty equidistant points were marked along the contour of mandibular cross-section and GPA, CVA and DFA were applied. RESULTS: (1) Mandibular height in hyperdivergent groups was significantly higher than that in normodivergent and hypodivergent groups (P < 0.05). (2) Hypodivergent groups showed significantly wider upper third of mandibular width from symphysis to molar region than that in hyperdivergent group (P < 0.05), except for the premolar and molar regions in male groups (P > 0.05). (3) Class II hyperdivergent group showed narrowest lower third width in the molar region, with the mean value of 12.03 mm in females and 11.98 mm in males. (4) For males and females, the ratio between height and lower third width at symphysis was significantly higher in Class II hyperdivergent group than that in Class I hyperdivergent group (P < 0.05). CONCLUSIONS: (1) The influence of vertical facial patterns on mandibular cross-sectional morphology is more obvious than that of sagittal skeletal pattern. (2) Subjects with increased vertical dimension presented with a remarkable "slimer" mandibular cross-sectional morphology at symphysis. (3) A deeper curve along the anterior contour of symphysis in Class II hyperdivergent group was noted with GPA.

Efficacy of Infrazygomatic Crest Implants for Full-arch Distalization of Maxilla and Reduction of Gummy Smile in Class II Malocclusion.

AIM: The purpose of the study was to evaluate the efficacy of infrazygomatic (IZ) implants along with mini-implants for full-arch distalization of maxilla and reduction of gummy smile in patients with class II division I malocclusion. MATERIALS AND METHODS: Ten orthodontic patients were taken from the department of orthodontics and dentofacial orthopedics. Each patient required distalization and intrusion of the complete maxillary arch as a part of the treatment plan. Patients were of class II malocclusion with gummy smile. Initial leveling and alignment were done by using 0.22″ slot Mclaughlin Bennett Trevisi (MBT) prescription. Fav Anchor infrazygomatic crest (IZC) implants of 2 mm of head diameter and 14 mm length were inserted between first and second molar and 2 mm above the mucogingival junction in the alveolar mucosa and in the anterior region, two titanium mini-implants of 1.4 mm head diameter and 6 mm length. The screws were loaded immediately with e-chain with a minimal force from mini-implants in the anterior region to crimpable hook placed between lateral and canine and continuing the same till the IZ implants. To measure the amount of distalization and reduction of gummy smile, pre- and postlateral cephalograms were taken and assessed. Pre- and postdistalization and intrusion readings of all patients were obtained and calculated statistically for quantifying the amount of distalization of maxillary arch and intrusion for reduction of gummy smile. RESULTS: The distalization of the maxillary arch achieved was 4.6 mm which is clinically and statistically significant. The anterior teeth in the study were intruded with a minimum of 3.8 mm which is clinically and statistically significant; the gingival smile line was reduced with a mean of 3.4 mm which is clinically and statistically significant. Overbite correction of 4 mm was done with the mean difference of 4 mm which is also statistically significant. CONCLUSION: The IZ bone screws can be effectively used as an absolute anchorage to correct class II skeletal discrepancy with gummy smile devoid of premolar extraction with noninvasive procedure. CLINICAL SIGNIFICANCE: The use of IZC implants along with anterior implants, a biomechanical approach is effective in achieving full-arch distalization of maxilla and intrusion as the force vectors allow that the line of action passes through the center of resistance (Cr) of the entire maxillary arch, facilitates the distalization and intrusion of the maxillary arch, establishes ideal occlusion, and improves the smile esthetics.