Content validity of the EQ-5D-5L with skin irritation and self-confidence bolt-ons in patients with atopic dermatitis: a qualitative think-aloud study.

OBJECTIVES: Two bolt-on dimensions (skin irritation, self-confidence) have been developed for the EQ-5D-5L to improve its content validity and responsiveness in psoriasis. However, the two bolt-ons are not strictly psoriasis-specific and are potentially relevant in other skin conditions. This study aims to explore the content validity of the EQ-5D-5L with two bolt-ons in patients with atopic dermatitis (AD). METHODS: In 2021-2022, qualitative, semi-structured interviews were conducted with 20 adult AD patients at a university dermatology clinic in Hungary. We aimed for a heterogeneous sample in terms of age, gender, education and disease severity. Patients completed the EQ-5D-5L with two bolt-ons using a think-aloud protocol. Probing questions were posed to investigate item relevance, potential conceptual overlaps, missing concepts and the appropriateness of the recall period. Interview transcripts were subjected to thematic analysis. RESULTS: The EQ-5D-5L with the two bolt-ons covered the most important aspects of health-related quality of life in AD patients. Most patients found both the skin irritation and self-confidence bolt-ons relevant. Fifteen potential missing concepts were identified, but only two (social relationships, judgement by others) were identified by more than one patient. A smaller conceptual overlap was found between the skin irritation and pain/discomfort dimensions in 7 patients (35%). Half the patients expressed a preference for a recall period of 1 week rather than of 'today'. CONCLUSIONS: The EQ-5D-5L with skin irritation and self-confidence bolt-ons showed good relevance, comprehensiveness and comprehensibility in patients with AD. However, in terms of comprehensiveness, social relationships and judgement by others (stigma) may be missing from the questionnaire.

The effect of electrical stimulation on skin vulnerability to irritants.

PURPOSE: Electrical stimulation (ES) is a widely used technique in the medical field for various purposes. The effect of ES on several skin properties has been investigated; however, its effect on skin vulnerability to irritants remains unknown. This study aimed to investigate the effects of ES application on skin vulnerability to external irritants. MATERIALS AND METHODS: An experimental study on 12 healthy male subjects (Mean ± SD, 22.9 ± 3.6 years) who completed the study. The subjects were free of skin abnormalities in the volar aspect of both forearms. Three areas were allocated to each forearm and marked as areas 1, 2, and A in the treated forearm, and areas 3, 4, and B in the control forearm. ES was applied to the volar aspect of the treated forearm for 30 min three times a week, for 2 weeks. The effect of ES on skin vulnerability was investigated using 5% and 0.5% sodium lauryl sulfate (SLS) patches applied to both treated and control forearms. The skin response to irritants was evaluated using transepidermal water loss (TEWL) and a visual erythema score 24 h after patch removal. RESULTS: Compared to the control forearm, ES increased skin permeability and erythema in response to external irritants (SLS), as measured by the visual analog score (Z = 2.75, p = 0.006) and TEWL (p < 0.05), respectively. CONCLUSIONS: ES escalates skin reactions to low concentrations of irritant substances, such as SLS, in the area between the two electrodes. This emphasizes the use of this substance, and similar irritants should be avoided in areas treated with ES.

Multispectral near-infrared spectroscopy study evaluating the effect of razor design on shaving-induced erythema.

BACKGROUND: While shaving-induced erythema is a common inflammatory skin issue, there is a lack of quantitative information on how well a shaving product performs in this regard. In this study, multispectral near-infrared spectroscopy (NIRS) imaging was used to quantitatively and qualitatively measure the extent of shaving-induced erythema. The research compares a safety razor and a cartridge razor to evaluate their impact on skin irritation. MATERIALS AND METHODS: Fifty-nine healthy male volunteers without pre-existing skin conditions were enrolled. Basic demographics were recorded, and participants' faces or necks were imaged before shaving. Shaving was conducted on the right side of the face/neck with the safety razor and on the left side of the face/neck using the 3-blade cartridge razor. Images were captured immediately after shaving, at 5 and 10 min post-shaving. RESULTS: Tissue oxygen saturation (StO2) measurements demonstrated that the safety razor induced significantly less erythema than the cartridge razor. Immediately after shaving, 40.3% of skin shaved with the safety razor had erythema compared to 57.6% for the cartridge razor. At 5 min post-shaving, 36.5% of skin shaved with the safety razor had erythema, compared to 53.8% of cartridge razor. CONCLUSIONS: Multispectral NIRS revealed significant differences in shaving-induced erythema between safety and cartridge razors. Safety razors demonstrated a lower incidence of erythema, suggesting a potential advantage for individuals prone to skin irritation. This study contributes valuable insights into skin irritation and highlights the potential of multispectral NIRS in dermatology research.

Research progress in the development of 3D skin models and their application to in vitro skin irritation testing.

Toxicological assessment of chemicals is crucial for safeguarding human health and the environment. However, traditional animal experiments are associated with ethical, technical, and predictive limitations in assessing the toxicity of chemicals to the skin. With the recent development of bioengineering and tissue engineering, three-dimensional (3D) skin models have been commonly used as an alternative for toxicological studies. The skin consists of the subcutaneous, dermis, and epidermis. All these layers have crucial functions such as physical and biological protection and thermoregulation. The epidermis is the shallowest layer protecting against external substances and media. Because the skin is the first contact point for many substances, this organ is very significant for assessing local toxicity following skin exposure. According to the classification of the United Nations Global Harmonized System, skin irritation is a major potentially hazardous characteristic of chemicals, and this characteristic must be accurately assessed and classified for enhancing chemical safety management and preventing and reducing chemical accidents. This review discusses the research progress of 3D skin models and introduces their application in assessing chemical skin irritation.

A comparative study on the effect of alcohol-based hand sanitizers in spray and gel formulation on the skin: A prospective, randomised, crossover trial.

BACKGROUND: Many formulations of Alcohol-based hand rubs (ABHRs), such as liquid, gel, and spray have been developed and used for preventing infections. This study aimed to compare skin irritation from using ABHRs in gel and spray formulations. METHOD: This was a prospective, randomised, crossover trial conducted to investigate the effect of skin irritation caused by ABHRs in gel compared to spray formulation after 21 days of using each formulation. Clinical outcomes were assessed using subjective Larson's skin assessment score and Frosch and Kligman observer skin assessment score, as well as bioengineering measures: transepidermal water loss (TEWL) and skin capacitance on days 3, 7, 14, and 21. RESULTS: Among 38 participants, both formulations showed no significant change in clinical scores and skin capacitance during the study. However, TEWL increased significantly from baseline on day 3 (p = 0.029) for the spray formulation and on day 21 (p = 0.019) for the gel formulation, with no statistically significant difference between the formulations (p = 0.46). CONCLUSION: Our research supports the safety of gel and spray ABHRs for regular use, with the only potential issue being mild skin irritation. For those with sensitive skin, the gel formulation is preferable.

Optimisation and in-vivo evaluation of extracted Karanjin loaded liposomal topical formulation for treatment of psoriasis in tape-stripped mouse model.

AIM: The present work is focus on development of anti-psoriasis activity of Karanjin (isolated from Pongamia pinnata seed oil) loaded liposome based lotion for enhancement of skin permeation and retention. METHOD: Karanjin was isolated using liquid-liquid extraction method and characterised by HPLC analysis and partition coefficient. Further, isolated Karanjin was loaded into liposomes using thin-film hydration technique and optimised by Box-Behnken design. Selected optimised batch was characterised their mean diameter, PDI, zeta potential, and entrapment efficiency, morphology (by TEM), FTIR and ex-vivo skin retention. Additionally, Karanjin loaded liposomes were formulated into lotion and characterise their rheological, spreadability, texture, ex-vivo skin permeation & retention, stability and anti-psoriatic activity in mouse tail model. RESULT: The yield of Karanjin from seed oil was 0.1% w/v and have lipophilic nature. The optimised liposomal formulation showed 195 ± 1.8 nm mean diameter, 0.271 ± 0.02 PDI, -27.0 ± 2.1 mV zeta potential and 61.97 ± 2.5% EE. TEM image revel the spherical shap of liposome surrounded by single phospholipid bilayer and no interection between drug and excipients. Further, lotion was prepared by 0.1% w/v carbopol and found to 615 mPa.sec viscosity, good thixotropic behaviour, spreadability and texture. There was 22.44% increase in drug permeation for Karanjin loaded liposomal lotion compared to pure Karanjin lotion, confirm by ex-vivo permeation and retention. While, in-vivo study revel the liposomal lotion of Karanjin was found to have 16.09% higher drug activity then 5% w/w conventional Karanjin lotion. CONCLUSION: Karanjin loaded liposomal lotion have an effective anti-psoriatic agent and showed better skin permeation and retention than the conventional Karanjin lotion.

Establishment and Validation of a Transdermal Drug Delivery System for the Anti-Depressant Drug Citalopram Hydrobromide.

To enhance the bioavailability and antihypertensive effect of the anti-depressant drug citalopram hydrobromide (CTH) we developed a sustained-release transdermal delivery system containing CTH. A transdermal diffusion meter was first used to determine the optimal formulation of the CTH transdermal drug delivery system (TDDS). Then, based on the determined formulation, a sustained-release patch was prepared; its physical characteristics, including quality, stickiness, and appearance, were evaluated, and its pharmacokinetics and irritation to the skin were evaluated by applying it to rabbits and rats. The optimal formulation of the CTH TDDS was 49.2% hydroxypropyl methyl cellulose K100M, 32.8% polyvinylpyrrolidone K30, 16% oleic acid-azone, and 2% polyacrylic acid resin II. The system continuously released an effective dose of CTH for 24 h and significantly enhanced its bioavailability, with a higher area under the curve, good stability, and no skin irritation. The developed CTH TDDS possessed a sustained-release effect and good characteristics and pharmacokinetics; therefore, it has the potential for clinical application as an antidepressant.

Safety-in-use test of facial cosmetic products on normal and self-assessed sensitive skin subjects.

BACKGROUND: Safety-in-use (SIU) studies are commonly used by the cosmetic Industry to confirm the skin and ocular compatibility of cosmetic products under realistic in-use conditions. There are only limited case studies published about the design, outcome and interpretation of product SIU studies. OBJECTIVE: A series of SIU case studies is presented to demonstrate the considerations in study design and how the methodology can help in supporting skin and ocular safety profile of facial cosmetic products within a population of different ethnicities with normal and self-perceived sensitive skin. SUBJECTS/METHODS: In a series of four single-blinded SIU studies, more than 250 female study subjects of different ethnicities and with normal and self-assessed sensitive skin were asked to use different facial cosmetic products including lotions, essences and cleansers according to the instructed usage conditions of these products. Each study was specifically designed according to product usage scenarios and target consumer groups. The primary measures of safety were based on dermal evaluations by a dermatologist for erythema and dryness/scaling and by an ophthalmologist for any visible signs of an ocular condition on eyelids, conjunctivae and cornea. The study subjects were also asked for any self-perceived skin or eye reactions. Dermal and ocular irritation potential of the products under realistic product usage conditions was evaluated according to the measures. RESULTS: Across all studies, objectively and self-assessed mean scores for skin and eye effects did not indicate any cumulative response of the investigated products over the study period. CONCLUSIONS: As a suitable tool for assessing and establishing the skin and eye compatibility of facial cosmetic products, SIU studies can be designed according to specific consumer groups, skin types and product usage scenarios to better predict realistic in-use conditions. It can demonstrate the safe use of the investigated products for people of different ethnicities, skin types and with normal or self-assessed sensitive skin, single product use or regimen use. The test results are consistent with the inherently low irritation potential of the products.

Transdermal Delivery of Niacin Through Polysaccharide Films Ameliorates Cutaneous Flushing in Experimental Wistar Rats.

BACKGROUND: Niacin, an established therapeutic for dyslipidemia, is hindered by its propensity to induce significant cutaneous flushing when administered orally in its unmodified state, thereby constraining its clinical utility. OBJECTIVE: This study aimed to fabricate, characterize, and assess the in-vitro and in-vivo effectiveness of niacin-loaded polymeric films (NLPFs) comprised of carboxymethyl tamarind seed polysaccharide. The primary objective was to mitigate the flushing-related side effects associated with oral niacin administration. METHODS: NLPFs were synthesized using the solvent casting method and subsequently subjected to characterization, including assessments of tensile strength, moisture uptake, thickness, and folding endurance. Surface characteristics were analyzed using a surface profiler and scanning electron microscopy (SEM). Potential interactions between niacin and the polysaccharide core were investigated through X-ray diffraction experiments (XRD) and Fourier transform infrared spectroscopy (FTIR). The viscoelastic properties of the films were explored using a Rheometer. In-vitro assessments included drug release studies, swelling behavior assays, and antioxidant assays. In-vivo efficacy was evaluated through skin permeation assays, skin irritation assays, and histopathological analyses. RESULTS: NLPFs exhibited a smooth texture with favorable tensile strength and moisture absorption capabilities. Niacin demonstrated interaction with the polysaccharide core, rendering the films amorphous. The films displayed slow and sustained drug release, exceptional antioxidant properties, optimal swelling behavior, and viscoelastic characteristics. Furthermore, the films exhibited biocompatibility and non-toxicity towards skin cells. CONCLUSION: NLPFs emerged as promising carrier systems for the therapeutic transdermal delivery of niacin, effectively mitigating its flushing-associated adverse effects.

Concomitant Effect of Quercetin and Its Copper Complex in the Development of Sustained-Release Nanoparticles of Polycaprolactone, Used for the Treatment of Skin Infection.

The study aimed to improve the treatment of impetigo with naturally occurring quercetin and its copper-quercetin (Cu-Q) complex by preparing sustained-release (SR) nanoparticles of polycaprolactone (PCL). The solvent evaporation method was used for the copper-quercetin (Cu-Q) complex formation, and their PCL nanoparticles (PCL-NPs, Q-PCL-NPs, and Cu-Q-PCL-NPs) were prepared by the high-pressure homogenization method. Synthesis of nanoparticles was confirmed by their physicochemical and antibacterial properties of quercetin against Gram-positive as well as Gram-negative bacteria. The percentage loading efficiency of quercetin and release in 100 mM of phosphate buffer pH 7.4 and 5.5 at 37 °C was found to be more than 90% after 24 h with the zero-order release pattern. Minimum inhibitory concentration of nanoparticles was found to increase threefold in the case of Cu-Q-PCL-NPs may be due to the synergistic antibacterial behavior. Scanning electron microscopy showed spherical nanoparticles, and surface roughness was confirmed by atomic force microscopy analysis. Fortunately, no sign of irritation on rat skin even at 3%, was seen. In vitro antioxidant assay by 2,2-diphenyl-1-picrylhydrazyl reduction was found to be ≤80 ± 0.02% which confirmed their scavenging activity. Interestingly, for the ex vivo study, the tape-stripping model was applied against Staphylococcus aureus containing rats and showed the formation of the epidermal layer within 4-5 days. Confirmation of antibacterial activity of pure quercetin, from Cu-Q complex, and their SR release from Q-PCL-NPs and Cu-Q-PCL-NPs was considered an effective tool for the treatment of skin diseases and can be used as an alternative of already resistant ciprofloxacin in impetigo.

Design of an Ante-enhancer with an Azone-Mimic Structure using Ionic Liquid.

PURPOSE: Laurocapram (Azone) was broadly examined as a representative enhancer of skin penetration in the 1980s. However, it was not approved for treatment because it caused skin irritation following its penetration into the epidermis through the stratum corneum. In the present study, a so-called ante-enhancer with an Azone-mimic structure was designed based on an ante-drug with negligible systemic toxic effects following its permeation through the skin. METHODS: The ante-enhancer was designed using ionic liquid technology: an ionic liquid-type ante-enhancer (IL-Azone) with an Azone-mimic structure was prepared from ε-caprolactam and myristic acid as cationic and anionic substances, respectively. The enhancing effects of IL-Azone on the permeation by the following model drugs through pig skin were examined: isosorbide 5-mononitrate (ISMN), antipyrine (ANP), and fluorescein isothiocyanate dextran (FD-4). Skin irritation by IL-Azone was assessed using the Draize method. RESULTS: The primary irritation index (P.I.I.) of IL-Azone by the Draize method was markedly lower than that of Azone (6.9). Although the ability of IL-Azone to enhance skin penetration was not as high as Azone, IL-Azone moderately increased skin permeation by the model compounds tested (ISMN: 4.7 fold, ANP: 4.5 fold, FD-4: 4.0 fold). CONCLUSIONS: These results suggest the usefulness of designing a skin penetration enhancer using ionic liquid technology. Further trials on the ionic liquid design with an Azone-mimic structure using other cations and anions may lead to the development of better ante-enhancers.

A win-win scenario for antibacterial activity and skin mildness of cationic surfactants based on the modulation of host-guest supramolecular conformation.

The commercial cationic surfactants (CSAa) with quaternary ammonium (QA) groups have proved to be broad-spectrum bactericide against bacteria, fungi, and viruses. Nevertheless, they inevitably exhibit potent irritation on the skin. In this work, we systematically investigated the regulatory mechanism of the host-guest supramolecular conformation with ß-cyclodextrin (ß-CD) on the bactericidal performance and skin irritation of CSAa with different head groups and chain lengths. When the ratio of incorporated ß-CD is not greater than 1:1, the bactericidal efficiency of CSAa@ß-CD (n > 12) remained above 90 % due to the free QA groups and hydrophobic fraction that can act on negatively charged bacterial membranes. And once the ratio of ß-CD exceeded 1:1, the ß-CD attracted to the bacterial surface by hydrogen bonding might prevent CSAa@ß-CD from acting on bacteria, resulting in a decrement in antibacterial performance. Even so, the antibacterial activity of CSAa with long alkyl chains (n = 16, 18) was independent from the complexation of ß-CD. Accordingly, both the zein solubilization assay and the neutrophil migration assay on zebrafish skin evidenced that ß-CD attenuated the interaction of surfactant with skin model proteins and the inflammatory effect on zebrafish, thereby enhancing skin mildness. In this way, we hope to create a simple but effective brainpower using the host-guest approach to guarantee both bactericidal efficiency and skin mildness without modifying the chemical structure of these commercial biocides.

Characterisation of cytotoxicity and immunomodulatory effects of glycolipid biosurfactants on human keratinocytes.

Skin irritation and allergic reactions associated with the use of skincare products formulated with synthetically derived surfactants such as sodium lauryl ether sulphate (SLES) have encouraged the search for naturally derived and biocompatible alternatives. Glycolipid biosurfactants such as sophorolipids (SL) and rhamnolipids (RL) offer a potential alternative to SLES. However, most studies on the bioactive properties of microbial glycolipids were determined using their mixed congeners, resulting in significant inter-study variations. This study aims to compare the effects of highly purified SL (acidic and lactonic) and RL (mono-RL and di-RL) congeners and SLES on a spontaneously transformed human keratinocyte cell line (HaCaT cells) to assess glycolipids' safety for potential skincare applications. Preparations of acidic SL congeners were 100% pure, lactonic SL were 100% pure, mono-RL were 96% pure, and di-RL were 97% pure. Cell viability using XTT assays, cell morphological analyses, and immunoassays revealed that microbial glycolipids have differing effects on HaCaT cells dependent on chemical structure. Compared with SLES, acidic SL and mono-RL have negligible effects on cell viability, cell morphology, and production of pro-inflammatory cytokines. Furthermore, at non-inhibitory concentrations, di-RL significantly attenuated IL-8 production and CXCL8 expression while increasing IL-1RA production and IL1RN expression in lipopolysaccharide-stimulated HaCaT cells. Although further studies would be required, these results demonstrate that as potential innocuous and bioactive compounds, microbial glycolipids could provide a substitute to synthetic surfactants in skincare formulations and perform immunopharmacological roles in topical skin infections such as psoriasis. KEY POINTS: • Purified glycolipid congeners have differing effects on human keratinocytes. • Compared with SLES, acidic sophorolipids and mono-rhamnolipids have innocuous effects on keratinocytes. • Di-rhamnolipids and mono-rhamnolipids modulate cytokine production in lipopolysaccharide stimulated human keratinocytes.

Skin and eye irritancy assessment of six lactic acid bacteria strains.

Here we investigate the suitability of in vitro models to assess the skin and eye irritation potential of six microbial strains. Acute skin irritation was tested according to the unmodified and modified OECD test guideline (OECD TG) 439, while acute eye irritation was examined using the OECD TG 491 and 492. The OECD TG 439 guideline, modified to introduce 8-10 µg/mL of streptomycin during the recovery phase and use of test items containing 100% microbial product instead of finished formulae, was found to be suitable for skin irritation evaluation. On the other hand, the OECD TG 491 procedure was the most appropriate for evaluating eye irritation. None of the six microbial strains, namely, Lactiplantibacillus plantarum (IMI 507026, IMI 507027, IMI 507028), Lacticaseibacillus rhamnosus (IMI 507023), and Pediococcus pentosaceus (IMI 507024, IMI 507025), tested in this study caused skin or eye irritation under the study condition.

Validation study for in vitro skin irritation test using reconstructed human skin equivalents constructed by layer-by-layer cell coating technology.

The aim of this study is to validate an in vitro skin irritation test (SIT) using three-dimensional reconstructed human epidermal (RhE) skin equivalents prepared by layer-by-layer (LbL) method (LbL-3D Skin) in a series of interlaboratory studies. The goal of these validation studies is to evaluate the ability of this in vitro test to reliably discriminate skin irritant from nonirritant chemicals, as defined by OECD and UN GHS. This me-too validation study is to assess the within- and between-laboratory reproducibility, as well as the predictive capacity, of the LbL-3D Skin SIT in accordance with performance standards for OECD TG 439. The developed skin model, LbL-3D Skin had a highly differentiated epidermis and dermis, similar to the validated reference methods (VRM) and native human skin. The quality parameters (cell survival in controls, tissue integrity, and barrier function) were similar to VRM and in accordance with OECD TG 439. The LbL-3D Skin SIT validation study was performed by three participating laboratories and consisted of three independent tests using 20 reference chemicals. The results obtained with the LbL-3D Skin demonstrated high within-laboratory and between-laboratory reproducibility, as well as high accuracy for use as a stand-alone assay to distinguish skin irritants from nonirritants. The predictive potency of LbL-3D Skin SIT using total 54 test chemicals were comparable to those in other RhE models in OECD TG 439. The validation study demonstrated that LbL-3D Skin has proven to be a robust and reliable method for predicting skin irritation.

Plant-inspired adhesive and injectable natural hydrogels: in vitro and in vivo studies.

The development of alternative therapeutic treatments based on the use of medicinal and aromatic plants, such as Juniper communis L., has aroused interest in the medical field to find new alternatives to conventional therapeutic treatments, which have shown problems related to bacterial resistance, high costs, or sustainability in their production. The present work describes the use of hydrogels based on sodium alginate and carboxymethyl cellulose, with combinations of juniperus leaves and berry extracts, in order to characterize their chemical characteristics, antibacterial activity, tissue adhesion test, cytotoxicity in the L929 cell line, and their effects on an in vivo model in mice to maximize the use of these materials in the healthcare field. Overall, an adequate antibacterial potential against S. aureus, E. coli and P. vulgaris was obtained with doses above 100 mg.mL-1 of hydrogels. Likewise, low cytotoxicity in hydrogels combined with extracts has been identified according to the IC50 value at 17.32 µg.mL-1, compared to the higher cytotoxic activity expressed by the use of control hydrogels with a value at 11.05 µg.mL-1. Moreover, in general, the observed adhesion was high to different tissues, showing its adequate capacity to be used in different tissue typologies. Furthermore, the invivo results have not shown erythema, edema, or other complications related to the use of the proposed hydrogels. These results suggest the feasibility of using these hydrogels in biomedical applications given the observed safety.

Effect of Achillea fragrantissima Extract on Excision Wound Biofilms of MRSA and Pseudomonas aeruginosa in Diabetic Mice.

Achillea fragrantissima, a desert plant commonly known as yarrow, is traditionally used as an antimicrobial agent in folklore medicine in Saudi Arabia. The current study was undertaken to determine its antibiofilm activity against methicillin-resistant Staphylococcus aureus (MRSA) and multi-drug-resistant Pseudomonas aeruginosa (MDR-P. aeruginosa) using in vitro and in vivo studies. A biofilm model induced through an excision wound in diabetic mice was used to evaluate its effect in vivo. The skin irritation and cytotoxic effects of the extract were determined using mice and HaCaT cell lines, respectively. The Achillea fragrantissima methanolic extract was analyzed with LC-MS to detect different phytoconstituents, which revealed the presence of 47 different phytoconstituents. The extract inhibited the growth of both tested pathogens in vitro. It also increased the healing of biofilm-formed excision wounds, demonstrating its antibiofilm, antimicrobial, and wound-healing action in vivo. The effect of the extract was concentration-dependent, and its activity was stronger against MRSA than MDR-P. aeruginosa. The extract formulation was devoid of a skin irritation effect in vivo and cytotoxic effect on HaCaT cell lines in vitro.

Nanostructured Lipid Carrier-Based Gel for Repurposing Simvastatin in Localized Treatment of Breast Cancer: Formulation Design, Development, and In Vitro and In Vivo Characterization.

Simvastatin (SMV) is noticed as a repurposed candidate to be effective against breast cancer (BC). However, poor solubility, dose-limiting toxicities, and side effects are critical hurdles in its use against BC. The above drawbacks necessitate the site-specific (localized) delivery of SMV via suitable nanocarriers. Therefore, the present study intended to develop SMV nanostructured lipid carrier (NLC)-based gel using carbopol-934 as a gelling agent to achieve local delivery and improve patient compliance while combating BC. The SMV NLCs were fabricated by melt-emulsification ultrasonication technique using stearic acid as solid lipid, olive oil (OO) as liquid lipid, tween 20 as a surfactant, and PEG-200 as a co-surfactant, and optimized by Box-Behnken design. The optimized SMV-loaded NLCs displayed % entrapment efficiency of 91.66 ± 5.2% and particle size of 182 ± 11.9 nm. The pH of NLC-based gels prepared using a 2.0% w/v of carbopol-934 was found in the range of 5.3-5.6 while the viscosity was in the range of 5.1-6.6 Pa.S. Besides, NLC-based gels exhibited higher and controlled SMV release (71-76%) at pH 6.8 and (78-84%) at pH 5.5 after 48 h than SMV conventional gel (37%) at both pH 6.8 and 5.5 after 48 h. The ex vivo permeation of SMV from NLC-based gel was 3.8 to 4.5 times more than conventional gel. Notably, SMV-loaded NLCs displayed ameliorated cytotoxicity than plain SMV against MCF-7 and MDA-MB-231 BC cells. No substantial difference was noticed in the cytotoxicity of NLC-based gels and pure SMV against both cell lines. The SMV NLC-based gel exhibited the absence of skin irritation in vivo in the mice following topical application. In addition, the histopathological study revealed no alteration in the mice skin anatomy. Furthermore, the SMV-loaded NLCs and NLC-based gels were stable for 6 months at refrigerator conditions (4°C ± 2°C). Thus, the present research confirms that NLC-based gel can be a safe, efficacious, and novel alternative to treat BC.

Safety assessment of Asterarcys quadricellulare, a microalga, with applications in poultry and livestock feed.

Asterarcys quadricellulare (AQ) is a microalgal species with potential applications in improving the quality of animal feed, and safety studies on this species are lacking. Therefore, this study presents safety data on an industrially cultivated strain of AQ tested using the following Organisation for Economic Co-operation and Development (OECD) guidelines: acute skin irritation in rabbits; skin sensitisation in guinea pigs; acute eye irritation in rabbits; acute oral fixed-dose procedure in rats; and bacterial reverse mutation using the B.N. Ames technique. Results showed that AQ is non-irritant and non-sensitising to skin. AQ caused transient conjunctival lacrimation and redness; however, the scores for these clinical signs translated into low ocular irritation indices and classification of AQ as non-irritant to the eyes. An acute oral dose of AQ (2000 mg/kg) did not cause mortality, change in body weight gain, or any general, functional, and neurobehavioral clinical signs. In five strains of Salmonella typhimurium bacteria, treatment with AQ did not cause biologically or statistically significant changes in the number of revertant colonies, indicating that AQ does not cause mutagenic toxicity. This study demonstrates the safety of a heterotrophically-produced strain of AQ and supports its use as a safe and non-toxic feed ingredient.

Losartan Potassium and Verapamil Hydrochloride Compound Transdermal Drug Delivery System: Formulation and Characterization.

In this study, we developed a sustained-release transdermal delivery system containing losartan potassium (LP) and verapamil hydrochloride (VPH). LP and VPH have low bioavailability and long half-life. Therefore, the development of an optimum administration mode is necessary to overcome these drawbacks and enhance the antihypertensive effect. A transdermal diffusion meter was used to determine the optimal formulation of LP-VPH transdermal drug delivery systems (TDDS). Based on in vitro results, a sustained-release patch was prepared. Physical characteristics, including quality, stickiness, and appearance, were evaluated in vitro, while pharmacokinetics and skin irritation were evaluated in vivo. The results showed that 8.3% polyvinyl alcohol, 74.7% polyvinylpyrrolidone K30, 12% oleic acid-azone, and 5% polyacrylic acid resin II provided an optimized TDDS product for effective administration of LP and VPH. Furthermore, in vitro and in vivo release tests showed that the system continuously released LP and VPH for 24 h. The pharmacokinetic results indicated that although the maximum concentration was lower, both the area under the curve from 0-time and the mean residence time of the prepared patch were significantly higher than those of the oral preparations. Furthermore, the prepared LP-VPH transdermal patch showed good stability and no skin irritation. The developed LP-VPH TDDS showed a sustained-release effect and good characteristics and pharmacokinetics; therefore, it is an ideal formulation.