Cogeneration of Clean Water and Valuable Energy/Resources via Interfacial Solar Evaporation.

Water, covering over two-thirds of the Earth's surface, holds immense potential for generating clean water, sustainable energy, and metal resources, which are the cornerstones of modern society and future development. It is highly desired to produce these crucial elements through eco-friendly processes with minimal carbon footprints. Interfacial solar evaporation, which utilizes solar energy at the air-liquid interface to facilitate water vaporization and solute separation, offers a promising solution. In this review, we systematically report the recent progress of the cogeneration of clean water and energy/resources including electricity, hydrogen, and metal resources via interfacial solar evaporation. We first gain insight into the energy and mass transport for a typical interfacial solar evaporation system and reveal the residual energy and resources for achieving the cogeneration goal. Then, we summarize the recent advances in materials/device designs for efficient cogeneration. Finally, we discuss the existing challenges and potential opportunities for the further development of this field.

Re-Designing Cellulosic Core-Shell Composite Fibers for Advanced Photothermal and Thermal-Regulating Performance.

Flexible fibers and textiles featuring photothermal conversion and storage capacities are ideal platforms for solar-energy utilization and wearable thermal management. Other than using fossil-fuel-based synthetic fibers, re-designing natural fibers with nanotechnology is a sustainable but challenging option. Herein, advanced core-shell structure fibers based on plant-based nanocelluloses are obtained using a facile co-axial wet-spinning process, which has superior photothermal and thermal-regulating performances. Besides serving as the continuous matrix, nanocelluloses also have two other important roles: dispersing agent when exfoliating molybdenum disulfide (MoS2), and stabilizer for phase change materials (PCM) in the form of Pickering emulsion. Consequently, the shell layer contains well-oriented nanocelluloses and MoS2, and the core layer contains a high content of PCM in a leak-proof encapsulated manner. Such a hierarchical cellulosic supportive structure leads to high mechanical strength (139 MPa), favorable flexibility, and large latent heat (92.0 J g-1), surpassing most previous studies. Furthermore, the corresponding woven cloth demonstrates satisfactory thermal-regulating performance, high solar-thermal conversion and storage efficiency (78.4-84.3%), and excellent long-term performance. In all, this work paves a new way to build advanced structures by assembling nanoparticles and polymers for functional composite fibers in advanced solar-energy-related applications.

An Efficient MnO2 Photocathode with an Excellent SnO2 Electron Transport Layer for Photo-Accelerated Zinc Ion Batteries.

Photo-accelerated rechargeable batteries play a crucial role in fully utilizing solar energy, but it is still a challenge to fabricate dual-functional photoelectrodes with simultaneous high solar energy harvesting and storage. This work reports an innovative photo-accelerated zinc-ion battery (PAZIB) featuring a photocathode with a SnO2@MnO2 heterojunction. The design ingeniously combines the excellent electronic conductivity of SnO2 with the high energy storage and light absorption capacities of MnO2. The capacity of the SnO2@MnO2-based PAZIB is ≈598 mAh g-1 with a high photo-conversion efficiency of 1.2% under illumination at 0.1 A g-1, which is superior to that of most reported MnO2-based ZIB. The boosting performance is attributed to the synergistic effect of enhanced photogenerated carrier separation efficiency, improved conductivity, and promoted charge transfer by the SnO2@MnO2 heterojunction, which is confirmed by systematic experiments and theoretical simulations. This work provides valuable insights into the development of dual-function photocathodes for effective solar energy utilization.

Spatiotemporal Utilization of Latent Heat in Erythritol-based Phase Change Materials as Solar Thermal Fuels.

Solar thermal fuels (STFs) have been particularly concerned as sustainable future energy due to their impressive ability to store solar energy in chemical bonds and controllably release thermal energy. However, currently studied STFs mainly focus on molecule-based materials with high photochemical activity, toxicity, and compromised features, which greatly restricts their applications in practical scenarios of solar energy utilization. Herein, we present a novel erythritol-based composite phase change material (PCM) as a new type of STFs with an outstanding capability to store solar energy as latent heat in its stable supercooling state and release thermal energy as needed. This composite PCM with stored thermal energy can be maintained stably at room temperature and subsequently release latent heat as high as 224.9 J/g during the crystallization process triggered by thermal stimuli. Remarkably, solar energy can be converted into latent heat stored in the composite PCM over months. Through mechanical stimulations, the released latent heat can increase the temperature of the composite up to 91 °C. This work presents a new concept of using spatiotemporal storage and release of latent heat in PCMs for solar energy utilization, making it a potential candidate as STFs for developing future clean energy techniques.

Rh/Al Nanoantenna Photothermal Catalyst for Wide-Spectrum Solar-Driven CO2 Methanation with Nearly 100% Selectivity.

Solar-powered CO2 conversion represents a promising green and sustainable approach for achieving a carbon-neutral economy. However, the rational design of a wide-spectrum sunlight-driven catalysis system for effective CO2 reduction is an ongoing challenge. Herein, we report the preparation of a rhodium/aluminum (Rh/Al) nanoantenna photothermal catalyst that can utilize a broad range of sunlight (from ultraviolet to the near-infrared region) for highly efficient CO2 methanation, achieving a high CH4 selectivity of nearly 100% and an unprecedented CH4 productivity of 550 mmol·g-1·h-1 under concentrated simulated solar irradiation (11.3 W·cm-2). Detailed control experiment results verified that the CO2 methanation process was facilitated by the localized surface plasmonic resonance and nanoantenna effects of the Rh/Al nanostructure under light irradiation. In operando temperature-programmed Fourier transform infrared spectroscopy confirmed that CO2 methanation on the Rh/Al nanoantenna catalyst was a multistep reaction with CO as a key intermediate. The design of a wide-spectrum solar-driven photothermal catalyst provides a feasible strategy for boosting CO2-to-fuel conversion.

Plasmon-Enhanced Solar Water Splitting on Metal-Semiconductor Photocatalysts.

Photocatalytic water splitting using solar energy has been widely studied as a promising method for clean energy production. Continued efforts have been made to enhance the performance of solar-to-fuel energy conversion. The introduction of localized surface plasmon resonance (SPR) has been proposed as a promising strategy to enhance the efficiency of photocatalytic water splitting. This review presents an overview of the recent progress in the development of plasmonic photocatalysts for solar water splitting. Plasmon-enhanced mechanisms, including hot electron injection, near-field effects, and light scattering/trapping, are discussed. Furthermore, recent relevant works to discuss the emerging strategies for efficiency improvement and better understanding of the mechanisms are summarized. Finally, the perspectives of plasmonic photocatalysts for water splitting and the possible research directions are presented and discussed.

Cobalt Phosphide Double-Shelled Nanocages: Broadband Light-Harvesting Nanostructures for Efficient Photothermal Therapy and Self-Powered Photoelectrochemical Biosensing.

Ultra-broadband light-absorbing materials are highly desired for effective solar-energy harvesting. Herein, novel cobalt phosphide double-shelled nanocages (CoP-NCs) are synthesized. Uniquely, these CoP-NCs are able to nonselectively absorb light spanning the full solar spectrum, benefiting from its electronic properties and hollow nanostructure. They promise a wide range of applications involving solar energy utilization. As proof-of-concept demonstrations, CoP-NCs are employed here as effective photothermal agents to ablate cancer cells by utilizing their ability of near-infrared heat conversion, and as photoactive material for self-powered photoelectrochemical sensing by taking advantage of their ability of photon-to-electricity conversion.

Dataset on Trombe wall application in a factory building.

An experimental passive solar thermal transmission wall (also known as Trombe wall) prototype was installed on a factory building wall in Kalnciems, Latvia to carry out temperature measurements at different representative locations in order to evaluate Trombe wall's potential to be used as a secondary space heating source. The average winter temperature in Kalnciems is 0.7 °C which stipulates the need for space heating (6-7 months a year). The dataset collection spanned from March 2022 through July 2023, enabling to acquire data over meaningful timeframe, as well as one full year cycle. Exploring Trombe wall technology in a cold climate setting aimed to examine its potential to curtail space heating energy consumption. The experimental Trombe wall prototype was closely monitored, and showcased substantial temperature increase during sunlight hours, emphasizing its potential to be used as a secondary heating source in industrial settings. The Trombe wall structure also demonstrated a sufficient internal temperature gradient (Δt between 1.5 and 5.0 m level a.g.) and generated rather substantial energy output, which is especially important for regions with moderate and cold climates. Enlarging and refining these systems could significantly reduce costs associated to space heating in industrial settings. Recommendations include investigating enhanced air circulation and filtration for improved functionality and user comfort.

Efficient Thermal Management with Selective Metamaterial Absorber for Boosting Photothermal CO2 Hydrogenation under Sunlight.

Photothermal catalytic CO2 hydrogenation is a prospective strategy to simultaneously reduce CO2 emission and generate value-added fuels. However, the demand of extremely intense light hinders its development in practical applications. Herein, this work reports the novel design of Ni-based selective metamaterial absorber and employs it as the photothermal catalyst for CO2 hydrogenation. The selective absorption property reduces the heat loss caused by radiation while possessing effectively solar absorption, thus substantially increasing local photothermal temperature. Notably, the enhancement of local electric field by plasmon resonance promotes the adsorption and activation of reactants. Moreover, benefiting from the ingenious morphology that Ni nanoparticles (NPs) are encapsulated by SiO2 matrix through co-sputtering, the greatly improved dispersion of Ni NPs enables enhancing the contact with reaction gas and preventing the agglomeration. Consequently, the catalyst exhibits an unprecedented CO2 conversion rate of 516.9 mmol gcat -1 h-1 under 0.8 W cm-2 irradiation, with near 90% CO selectivity and high stability. Significantly, this designed photothermal catalyst demonstrates the great potential in practical applications under sunlight. This work provides new sights for designing high-performance photothermal catalysts by thermal management.

Monolithic MXene Aerogels Encapsulated Phase Change Composites with Superior Photothermal Conversion and Storage Capability.

The inherently intermittent feature of solar energy requires reliable energy conversion and storage systems for utilizing the most abundant solar energy. Phase change materials are potential solutions to store a large amount of heat produced by solar light. However, few of the phase change materials have the ability to efficiently convert solar energy into heat; additionally, phase change materials need to be encapsulated in porous substrates for enhancing their leaking resistance and photo-to-thermal performance. In this work, monolithic MXene aerogels, fabricated by Al3+ cross-linking and freeze-drying, were used as the encapsulation and photothermal materials. The composites phase change materials of MXene/polyethylene glycol can be made with a large polyethylene glycol loading above 90 wt% with the maximum of 97 wt%, owing to the large porosity of MXene aerogels. The low content of MXene has a limited impact on the phase transition temperature and enthalpy of polyethylene glycol, with an enthalpy retention rate ranging from 89.2 to 96.5% for 90-97 wt% polyethylene glycol loadings. MXene aerogels greatly improve the leaking resistance of polyethylene glycol above its melting point of 60 °C, even at 100 °C. The composites phase change materials also show outstanding cycling stability for 500 cycles of heat storage and release, retaining 97.7% of the heat storage capability. The optimized composite phase change material has a solar energy utilization of 93.5%, being superior to most of the reported results. Our strategy produces promising composite phase change materials for solar energy utilization using the MXene aerogels as the encapsulation and photothermal materials.

Electrically conductive TiO2/CB/PVDF membranes for synchronous cross-flow filtration and solar photoelectrocatalysis.

Combining photocatalysis (PC) and membrane filtration (MF) has emerged as an attractive technology for water purification, however, the water purification efficiency and membrane fouling are still challenging. Herein, we report a novel photoelectrocatalytic (PEC) membrane mediated by a ternary polyvinylidene fluoride (PVDF)-carbon black (CB)-TiO2 composite conductive membrane synthesized by a phase inversion method assisted by the mixed surfactants of polyvinylpyrrolidone (PVP) and sodium dodecyl sulfate (SDS). The resultant electrically conductive TiO2/CB/PVDF membrane features a homogeneous surface with obvious pore size of 20-150 nm, a thickness ∼116 µm, and an average resistivity as low as ∼3.165 Ω∙m. The cooperation of PVP and SDS surfactants dramatically improves the organic-inorganic interactions and thus eventually enhances the porosity, stability of porous structure, mechanical stability, and conductivity and electrochemical properties of the hybrid membrane. Upon the solvent evaperation of the wellblended casting solution and the phase inversion, TiO2/CB preferentially exist on the surface of PVDF membrane, enabling the efficient PEC degradation of organic pollutants. The synergistic coupling of TiO2 and CB in PVDF membrane results in efficient PEC properties with bi-functional membrane antifouling and enhanced water purification in azo dyes decolorization under the stationary mode and in our lab-made continuous cross-flow PEC system, superior to those by photocatalysis and electrocatalysis. The developed synchronous MF and PEC system mediated by the conductive TiO2/CB/PVDF membrane proves to a feasible route to improving the self-cleaning properties of the polymer membrane while simultaneously increasing the water decontaminating efficiency.

Enhanced ultraviolet-visible photocatalysis of RGO/equaixial geometry TiO2 composites on degradation of organic dyes in water.

The reduced graphene oxide dopped equaixial geometry TiO2 (rGO/egTiO2) composite as photocatalyst was synthesized hydrothermally with various mass ratios of tetrabutyl titanate. The photocatalyst is considered to be rGO/equaixial geometry TiO2 in terms of modifying the combined reduced graphene Oxide and TiO2. The rGO plays a vital role in rGO/egTiO2 composite as photocatalysts were analyzed in methylene blue (MB) and rhodamine B (RhB) photocatalytic degradation under UV and simulated solar light irradiation. This synthesized catalyst was characterized by various analytical techniques such as XPS, XRD, SEM, BET, and TEM. The rGO/egTiO2 composite exhibits enhanced photocatalytic performance with degradation rates of 97.5 and 97% on RhB and MB for 60 min under UV radiation respectively, while the degradation rate of 94 and 92 % was observed on the same dyes for 6 h under the simulated sunlight radiation. The enhanced photocatalytic performance of the rGO/egTiO2 composite under ultraviolet irradiation source was owing to a high separation efficiency of the photo-induced electron-hole pairs, while the photocatalytic performance under simulated sunlight radiation was due to the photosensitive and charge separator behavior of rGO. This offers us an excellent potential of significant photocatalytic activity for the removal of organic contaminants from wastewater.

Core-shell structured cadmium sulfide nanocomposites for solar energy utilization.

Solar energy utilization technologies have been widely explored to solve the global energy crisis because the inexhaustible solar energy can be converted into chemical fuel and electricity. Various semiconductors that are crucial for solar energy utilization have been extensively developed. Among them, cadmium sulfide (CdS) has attracted extensive attention due to its suitable band-gap and excellent electrical/optical properties. However, CdS is still limited by rapid charge recombination, instability and low quantum efficiency. Core-shell structures can provide great opportunities for constructing advanced structures with superior properties to overcome the remaining challenges. This review focuses on the significant advances in core-shell structured CdS nanocomposites for solar energy utilization. Initially, the synthetic methods to construct core-shell structured CdS nanocomposites are reviewed. Then the applications in solar energy utilization are discussed, including photocatalytic\photoelectrochemical water splitting, photocatalytic CO2 reduction and solar cells. Finally, the perspectives of core-shell structured CdS nanocomposites for solar energy utilization are proposed.

Photodegradation of 2,4-dichlorophenol and rhodamine B over n-type ZnO/p-type BiFeO3 heterojunctions: detailed reaction pathway and mechanism.

The development of new technologies for efficient degradation of pollutant has been an increasing demand in the globe due to the serious environmental issues. Herein, we report n-type ZnO/p-type BiFeO3 composites as highly efficient visible light nanophotocatalysts prepared via a wet chemical solution method. Based on the measurements of •OH-related fluorescence (FL) spectra, photoluminescence (PL) spectra, photoelectrochemical I-V curves, and electrochemical impedance spectra (EIS), it is demonstrated that the photo-induced charge carrier (electron-hole pairs) in the as-prepared n-type ZnO/p-type BiFeO3 composites with proper amount of the coupled ZnO (10% by mass) exhibits high separation compared with the bare BiFeO3 (BFO) nanoparticles. This is well responsible for the superior visible light photocatalytic performance of the composites for 2,4-dichlorophenol (2,4-DCP) and rhodamine B (RhB) degradation. It is confirmed by means of scavenger test and liquid chromatography-tandem mass spectrometry (LC/MS) analysis of the intermediate products that •OH is the pre-dominant oxidant involved in the degradation of 2,4-DCP. A detailed reaction pathway for 2,4-dichlorophenol degradation over the amount-optimized ZnO/BFO composite is proposed mainly based on the LC/MS product ions. This work will provide a feasible route to design and develop BFO-based highly efficient visible light-active photocatalysts for environmental purification and could be extended to other visible light-active semiconductor materials.

Nature-Inspired, 3D Origami Solar Steam Generator toward Near Full Utilization of Solar Energy.

Solar steam generation, due to its capability of producing clean water directly by solar energy, is emerging as a promising eco-friendly and energy-efficient technology to address global challenges of water crisis and energy shortage. Although diverse materials and architectures have been explored to improve solar energy utilization, high efficiency in solar steam generation could be accomplished only with external optical and thermal management. For the first time, we report a deployable, three-dimensional (3D) origami-based solar steam generator capable of near full utilization of solar energy. This auxetic platform is designed based on Miura-ori tessellation and is able to efficiently recover radiative and convective heat loss as well as to trap solar energy via its periodic concavity pattern. The 3D solar steam generator device with a nanocarbon composite of graphene oxide and carbon nanotubes being photothermal component in this work shows a very strong dependence between its solar energy efficiency and surface areal density. The device yields an extraordinary solar energy efficiency close to 100% under 1 sun illumination at a highly folded configuration. The 3D origami device can withstand a great number of folding and unfolding cycles and shows unimpaired solar steam generation performances. The unique structural feature of the 3D origami structure offers a new insight into the future development of highly efficient and easily deployable solar steam generator.

Rapid Conversion from Carbohydrates to Large-Scale Carbon Quantum Dots for All-Weather Solar Cells.

A great challenge for state-of-the-art solar cells is to generate electricity in all weather. We present here the rapid conversion of carbon quantum dots (CQDs) from carbohydrates (including glucose, maltol, sucrose) for an all-weather solar cell, which comprises a CQD-sensitized mesoscopic titanium dioxide/long-persistence phosphor (m-TiO2/LPP) photoanode, a I-/I3- redox electrolyte, and a platinum counter electrode. In virtue of the light storing and luminescent behaviors of LPP phosphors, the generated all-weather solar cells can not only convert sunlight into electricity on sunny days but persistently realize electricity output in all dark-light conditions. The maximized photoelectric conversion efficiency is as high as 15.1% for so-called all-weather CQD solar cells in dark conditions.

Room-temperature Synthesis of Amorphous Molybdenum Oxide Nanodots with Tunable Localized Surface Plasmon Resonances.

Two-dimensional (2D) semiconductors have recently emerged as a remarkable class of plasmonic alternative to conventional noble metals. However, tuning of their plasmonic resonances towards different wavelengths in the visible-light region with physical or chemical methods still remains challenging. In this work, we design a simple room-temperature chemical reaction route to synthesize amorphous molybdenum oxide (MoO3-x ) nanodots that exhibit strong localized surface plasmon resonances (LSPR) in the visible and near-infrared region. Moreover, tunable plasmon resonances can be achieved in a wide range with the changing surrounding solvent, and accordingly the photoelectrocatalytic activity can be optimized with the varying LSPR peaks. This work boosts the light-matter interaction at the nanoscale and could enable photodetectors, sensors, and photovoltaic devices in the future.

Fiber-Based, Double-Sided, Reduced Graphene Oxide Films for Efficient Solar Vapor Generation.

Solar vapor generation is a promising and whole new branch of photothermal conversion for harvesting solar energy. Various materials and devices for solar thermal conversion were successively produced and reported for higher solar energy utilization in the past few years. Herein, a compact device of reduced graphene oxides (rGO) and paper fibers was designed and assembled for efficient solar steam generation under light illumination, and it consists of water supply pipelines (WSP), a thermal insulator (TI) and a double-sided absorbing film (DSF). Heat localization is enabled by the black DSF due to its broad absorption of sunlight. More importantly, the heat transfer, from the hot DSF to the cold base fluid (water), was suppressed by TI with a low thermal conductivity. Meanwhile, bulk water was continuously transported to the DSF by WSP through TI, which was driven by the surface energy and surface tension based on the capillary effect. The effects of reduction degrees of rGO on the photothermal conversion were explored, and the evaporation efficiency reached 89.2% under one sun with 60 mg rGO. This new microdevice provided a basic technical support for distillation, desalination, sewage treatment, and related technologies.