RESUMO
The electrostatic environment around nanoscale molecular junctions modulates charge transport; solvents alter this environment. Methods to directly probe solvent effects require correlating measurements of the local electrostatic environment with charge transport across the metal-molecule-metal junction. Here, we measure the conductance and current-voltage characteristics of molecular wires using a scanning tunneling microscope-break junction (STM-BJ) setup in two commonly used solvents. Our results show that the solvent environment induces shifts in molecular conductance, which we quantify, but more importantly we find that the solvent also impacts the magnitude of current rectification in molecular junctions. By incorporating electrochemical impedance spectroscopy into the STM-BJ setup, we measure the capacitance of the dipole layer formed at the metal-solvent interface and show that rectification can be correlated with solvent capacitance. These results provide a method of quantifying the impact of the solvent environment and a path toward improved environmental control of molecular devices.
RESUMO
Chiral molecular switches are attracting attention as they could pave the way to chiral molecular machines. Herein, we report on the design and synthesis of a single molecule chiral switch based on a cyclotriveratrylene scaffold, in which the chirality inversion is controlled by the solvent. Hemicryptophanes are built around a C3 cyclotriveratrylene chiral unit, with either M or P handedness, connected to another tripod and usually displaying an "out" configuration. Here, we demonstrate that solvents are able to control the "in" and "out" configurations of the CTV unit, creating a chiral molecular switch from (M/P)"in" to (P/M)"out" handedness. The full characterization of the "in" and "out" configurations and of the chirality switch were made possible by combining NMR, HPLC, ECD, DFT and molecular dynamics. Interestingly, bulky aromatic solvents such as 2-t-butylphenol favor the "in" configuration while polar aprotic solvents such as acetone favor the "out" configuration. This chiral switch was found to be fully reversible allowing the system to oscillate between two different M and P configurations several times upon the action of solvents stimuli.
RESUMO
In contrast to its behavior in solution, the adduct [(LiBr)(tBu)(Ph)Bpin]- (pin=pinacol) transfers its phenyl anion from boron to lithium upon fragmentation in the gas phase. Quantum chemical calculations predict this exceptional transmetalation to be exothermic relative to the separated reactants, [(tBu)(Ph)Bpin]- and LiBr, which we attribute to the high phenyl-anion affinity of the coordinatively unsaturated LiBr unit. The addition of a single molecule of tetrahydrofuran drastically reduces the phenyl-anion affinity of LiBr and thereby renders the transmetalation from boron to lithium endothermic. Thus, the probed system highlights the importance of solvation and ligation effects in transmetalations. For correctly predicting the direction, in which these reactions proceed, it is not sufficient to consider the electronegativities or partial charges of the involved metals or metalloids. Instead, the individual coordination states and their changes over the course of the reaction must be taken into account.
RESUMO
Herein we report a general access to silver(i) perfluoroalcoholates, their structure in the solid state and in solution, and their use as transfer reagents. The silver(i) perfluoroalcoholates are prepared by the reaction of AgF with the corresponding perfluorinated carbonyl compounds in acetonitrile and are stable for a prolonged time at -18 °C. X-ray analysis of single crystals of perfluoroalcoholate species showed that two Ag(i) centers are bridged by the alcoholate ligands. In acetonitrile solution, Ag[OCF3] forms different structures as indicated by IR spectroscopy. Furthermore, the silver(i) perfluoroalcoholates can be used as easy-to-handle transfer reagents for the synthesis of Cu[OCF3], Cu[OC2F5], [PPh4][Au(CF3)3(OCF3)], and fluorinated alkyl ethers.
RESUMO
We report a study of solvent effects on the rate, selectivity, and mechanism of (hetero)aryl (pseudo)halide oxidative addition to Pd(PCy3)2 as an exemplar of L2Pd(0) species. First, 2-chloro-3-aminopyridine is observed to undergo faster oxidative addition in toluene compared to more polar solvents, which is not consistent with the trend we observe with many other 2-halopyridines. We attribute this to solvent basicity hydrogen-bonding (pKHB) between solvent and substrate. Greater hydrogen-bond donation from the substrate leads to a more electron-rich aromatic system, and therefore slower oxidative addition. We demonstrate how this affects rate and site-selectivity for hydrogen-bond donating substrates. Second, electron-deficient multihalogenated pyridines exhibit improved site-selectivity in polar solvents, which we attribute to different C-X sites undergoing oxidative addition by two different mechanisms. The C-X site that favours the more polar nucleophilic displacement transition state is preferred over the site that favours a less-polar 3-centered transition state. Finally, (hetero)aryl triflates consistently undergo faster oxidative addition in more polar solvents, which we attribute to highly polar nucleophilic displacement transition states. This leads to improved site-selectivity for C-OTf oxidative addition, even in the presence of highly reactive 2-pyridylhalides.
RESUMO
We report a series of Pd(II)nL2n coordination rings for which nuclearity is controlled by the binding angle of the corresponding bis-monodentate bridging ligands. Judicious choice of the angle within a family of rather rigid ligands allowed for the first-time to synthesize a homoleptic five-membered Pd5L10 ring that does not require any template to form. We demonstrate that control over the ring size is maintained both in the solid-, solution-, and gas-phase. Two X-ray structures of five-membered rings from ligands with ideal angles (yielding a perfect pentagonal ring) vs. suboptimal angles (resulting in a highly distorted structure) illustrate the importance of the correct ligand geometry. A mathematical model for estimating the expected ring size based on the ligand angle was derived and DFT computations show that ring-strain is the major factor determining the assembly outcome.
RESUMO
Understanding solvent-solute interactions is essential to designing and synthesising soft materials with tailor-made functions. Although the interaction of the solute with the solvent mixture is more complex than the single solvent medium, solvent mixtures are exciting to unfold several unforeseen phenomena in supramolecular chemistry. Here, we report two unforeseen pathways observed during the hierarchical assembly of cationic perylene diimides (cPDIs) in water and amphiphilic organic solvent (AOS) mixtures. When the aqueous supramolecular polymers (SPs) of cPDIs are injected into AOS, initially kinetically trapped short SPs are formed, which gradually transform into thermodynamically stable high aspect ratio SP networks. Using various experimental and theoretical investigations, we found that this temporal evolution follows two distinct pathways depending on the nature of the water-AOS interactions. If the AOS is isopropanol (IPA), water is released from cPDIs into bulk IPA due to strong hydrogen bonding interactions, which further decreases the monomer concentration of cPDIs (Pathway-1). In the case of dioxane AOS, cPDI monomer concentration further increases as water is retained among cPDIs (Pathway-2) due to relatively weak interactions between dioxane and water. Interestingly, these two pathways are accelerated by external stimuli such as heat and mechanical agitation.
RESUMO
We investigate ion formation in hydrated formic acid (FA) clusters upon collision with electrons of variable energy, focusing on electron ionization at 70â eV (EI) and low-energy (1.5-15â eV) electron attachment (EA). To uncover details about the composition of neutral clusters, we aim to elucidate the ion formation processes in FAM â WN clusters initiated by interaction with electrons and determine the extent of cluster fragmentation. EI predominantly produces protonated [FAm+H]+ ions, and in FA-rich clusters, the stable ring structures surrounding H3O+ ions are formed. In contrast, EA leads to a competition between the formation of intact [FAm â Wn]- and dissociated [FAm â Wn-H]- fragment ions, influenced by the cluster size, level of hydration, and electron energy. Our findings reveal a predisposition of low-energy EA towards forming [FAm â Wn]-, while higher electron energies tend to favor the formation of [FAm â Wn-H]- due to intracluster ion-molecule reactions. The comparison of positive and negative ion spectra suggests that the mass spectra of FA-rich clusters may indicate their actual size and composition. On the other hand, the more weakly bound water evaporation from the clusters depends strongly on the ionization. Thus, for the hydrated clusters, the neutral cluster size can hardly be estimated from the mass spectra.
RESUMO
Donor-acceptor dyads based on BODIPYs have been recently employed to enhance the formation of triplet excited states with the process of spin-orbit charge transfer intersystem crossing (SOCT-ISC) which does not require introduction of transition metals or other heavy atoms into the molecule. In this work we compare two donor-acceptor dyads based on meso-naphthalenyl BODIPY by combining experimental and computational investigations. The photophysical and electrochemical characterization reveals a significant effect of alkylation of the BODIPY core, disfavoring the SOCT-ISC mechanism for the ethylated BODIPY dyad. This is complemented with a computational investigation carried out to rationalize the influence of ethyl substituents and solvent effects on the electronic structure and efficiency of triplet state population via charge recombination (CR) from the photoinduced electron transfer (PeT) generated charge-transfer (CT) state. Time dependent-density functional theory (TD-DFT) calculations including solvent effects and spin-orbit coupling (SOC) calculations uncover the combined role played by solvent and alkyl substitution on the lateral positions of BODIPY.
RESUMO
An empirical model was developed to predict organic solvophobic effects using N-phenylimide molecular balances functionalized with non-polar alkyl groups. Solution studies and X-ray crystallography confirmed intramolecular alkyl-alkyl interactions in their folded conformers. The structural modularity of the balances allowed systematic variation of alkyl group lengths. Control balances were instrumental in isolating weak organic solvophobic effects by eliminating framework solvent-solute effects. A 19 Fâ NMR label enabled analysis across 46 deuterated and non-deuterated solvent systems. Linear correlations were observed between organic solvophobic effects and solvent cohesive energy density (ced) as well as changes in solvent-accessible surface areas (SASA). Using these empirical relationships, a model was constructed to predict organic solvophobic interaction energy per unit area for any organic solvent with known ced values. The predicted interaction energies aligned with recent organic solvophobic measurements and literature values for the hydrophobic effect on non-polar surfaces confirmed the model's accuracy and utility.
RESUMO
α-Ketoaldehydes play versatile roles in the ubiquitous natural processes of protein glycation. However, leveraging the reactivity of α-ketoaldehydes for biomedical applications has been challenging. Previously, the reactivity of α-ketoaldehydes with guanidine has been harnessed to design probes for labeling Arg residues on proteins in an aqueous medium. Herein, a highly effective, broadly applicable, and operationally simple protocol for stapling native peptides by crosslinking two amino groups through diverse imidazolium linkers with various α-ketoaldehyde reagents is described. The use of hexafluoroisopropanol as a solvent facilitates rapid and clean reactions under mild conditions and enables unique selectivity for Lys over Arg. The naturally occurring GOLD/MOLD linkers have been expanded to encompass a wide range of modified glyoxal-lysine dimer (OLD) linkers. In a proof-of-concept trial, these modular stapling reactions enabled a convenient two-round strategy to streamline the structure-activity relationship (SAR) study of the wasp venom peptide anoplin, leading to enhanced biological activities.
Assuntos
Glioxal , Lisina , Glioxal/química , Lisina/química , Aminas , Aldeídos , Peptídeos , Reagentes de Ligações Cruzadas/químicaRESUMO
The analysis of pressure induced changes in the chemical shift of proteins allows statements on structural fluctuations proteins exhibit at ambient pressure. The inherent issue of separating general pressure effects from structural related effects on the pressure dependence of chemical shifts has so far been addressed by considering the characteristics of random coil peptides on increasing pressure. In this work, chemically and pressure denatured states of the cold shock protein B from Bacillus subtilis (BsCspB) have been assigned in 2D 1H-15N HSQC NMR spectra and their dependence on increasing hydrostatic pressure has been evaluated. The pressure denatured polypeptide chain has been used to separate general from structural related effects on 1H and 15N chemical shifts of native BsCspB and the implications on the interpretation of pressure induced changes in the chemical shift regarding the structure of BsCspB are discussed. It has been found that the ensemble of unstructured conformations of BsCspB shows different responses to increasing pressure than random coil peptides do. Thus, the approach used for considering the general effects that arise when hydrostatic pressure increases changes the structural conclusions that are drawn from high pressure NMR spectroscopic experiments that rely on the analysis of chemical shifts.
Assuntos
Bacillus subtilis , Proteínas de Bactérias , Ressonância Magnética Nuclear Biomolecular , Pressão , Conformação Proteica , Bacillus subtilis/química , Proteínas de Bactérias/química , Pressão HidrostáticaRESUMO
Solvents can significantly influence chemical reactions in condensed phases. Their critical properties are increasingly recognized in various research domains such as organic synthesis and biomass valorization. However, in semiconductor photocatalysis, solvents are primarily viewed as mediums for dissolving and diffusing substances, with their potential beneficial effects on photocatalytic conversions often overlooked. Additionally, common photocatalysis solvents like acetonitrile (ACN) pose serious safety and environmental concerns. In this study, we demonstrate that novel and safe green solvents, such as γ-valerolactone (GVL), can significantly enhance the performance of semiconductor photocatalysis for C-H bond activation. Non-specific solvent-solute interactions are the primary contributors to increased photocatalytic activity in the self-coupling of benzylic compounds. Specifically, GVL's large dielectric constant and high refractive index lower the energy barrier for the rate-determining C-H bond activation step, facilitating a faster coupling reaction. The versatility of GVL is further demonstrated in reactions with multiple reagents and in various oxidation and reduction photocatalytic systems beyond classic C-H bond activation. This work not only pioneers the use of green solvents but also provides comprehensive insights for proper solvent selection in semiconductor photocatalysis.
RESUMO
The possibilities and problems to predict excited-state acidities and basicities in water with electronic structure calculations combined with a continuum solvation model are investigated for a test set of photoacids and photobases. Different error sources, like errors in the ground-state p K a values, the excitation energies in solution for the neutral and (de-)protonated species, basis set effects, and contributions beyond implicit solvation are investigated and their contributions to the total error in p K a ∗ are discussed. Density functional theory in combination with the conductor like screening model for real solvents and an empirical linear Gibbs free energy relationship are used to predict the ground-state p K a values. For the test set, this approach gives more accurate p K a values for the acids than for the bases. Time-dependent density-functional theory (TD-DFT) and second-order wave function methods in combination with the conductor like screening model are applied to compute excitation energies in water. Some TD-DFT functionals fail for several species to predict correctly the order of the lowest excitations. Where experimental data for absorption maxima in water is available, the implicit solvation model leads with the applied electronic structure methods in most cases for the excitation energies in water to an overestimation for the protonated and to an underestimation for the deprotonated species. The magnitude and sign of the errors depend on the hydrogen bond donating and accepting ability of the solute. We find that for aqueous solution this results generally in an underestimation in the p K a changes from the ground to the excited state for photoacids and an overestimation for photobases.
RESUMO
Kinetic studies revealed that nitrate radicals (NO3 â ), which are formed through reaction of the noxious air pollutants nitrogen dioxide (NO2 â ) and ozone (O3 ), very rapidly oxidize phenylalanine residues in an aqueous environment, with overall rate coefficients in the 108 -109 â M-1 s-1 range. With amino acids and dipeptides as model systems, the data suggest that the reaction proceeds via a π-complex between NO3 â and the aromatic ring in Phe, which subsequently decays into a charge transfer (CT) complex. The stability of the π-complex is sequence-dependent and is increased when Phe is at the N terminus of the dipeptide. Computations revealed that the considerably more rapid radical-induced oxidation of Phe residues in both neutral and acidic aqueous environments, compared to acetonitrile, can be attributed to stabilization of the CT complex by the protic solvent; this clearly highlights the health-damaging potential of exposure to combined NO2 â and O3 .
Assuntos
Nitratos , Dióxido de Nitrogênio , Nitratos/química , Dióxido de Nitrogênio/química , Fenilalanina/química , Cinética , Oxirredução , Dipeptídeos/químicaRESUMO
Two representative organic photoreactions, namely a bimolecular photocycloaddition and a monomolecular photorearrangement, are presented that are accelerated when the reaction is performed "on-water", that is, at the water-substrate interface with no solvation of the reaction components. According to the established models of ground-state reactions "on-water", the enhanced efficiency of the photoreactions is explained by hydrophobic effects (Paternó-Büchi reaction) or specific hydrogen bonding (di-π-methane rearrangement) at the water-substrate interface that decrease the energy of the respective transition state. These results point to the potential of this approach to conduct photoreactions more efficiently in an ecologically favorable medium.
RESUMO
The aggregation of a cyclodextrin (CD)-based [3]rotaxane has been observed and analyzed in detail for the first time in this work. Although the hexagonal packing aggregation of CD-based polyrotaxane is a well known phenomenon, corresponding studies in terms of rotaxanes without any polymer structure have not been conducted so far, probably owing to the difficulty of the molecular design. We synthesized a series of [3]rotaxane species by using a urea-end-capping method and evaluated their aggregation behavior by XRD and SEM measurements. [3]Rotaxane species containing native CD rings showed clear signals assigned to the hexagonal packing by XRD measurement as did polyrotaxane; this proved their aggregation capability. Because the corresponding per-acetylated derivatives did not show this aggregation behavior, the driving force of this aggregation was suggested to be hydrogen bond formation among CD units. The effect of axle end structures and partial acetylation of CDs were also studied.
RESUMO
The roles of substituent and solvent effects in promoting the 4π electrocyclization of N-alkenylnitrones to give azetidine nitrones have been investigated by experimental examination of relative rates, activation energies, and linear free energy relationships. These transformations are synthetically important because they favor the formation of a strained heterocyclic ring with imbedded functionality and stereochemical information for versatile derivatization. Mechanistic investigations, including Hammett studies, solvent-dependent Eyring studies, and solvent isotope effects, provide insight into the steric and electronic factors that control these electrocyclizations and identify trends that can be used to advance this approach towards the rapid synthesis of complex azetidines.
RESUMO
Glucans are major biomaterials on the earth, with α-(1â4)-glucans (i. e., amylose) and ß-(1â4)-glucans (i. e., cellulose) being the most abundant ones, which are relevant to energy storage and structural function, respectively. Interestingly, (1â4)-glucans with alternate α/ß-linkages, namely herewith amycellulose, have never been disclosed in nature. Here we report a robust glycosylation protocol for the stereoselective construction of the 1,2-cis-α- and 1,2-trans-ß-glucosidic linkages, which employs an optimal combination of glycosyl N-phenyltrifluoroacetimidates as donors, TMSNTf2 as promoter, CH2 Cl2 /nitrile or CH2 Cl2 /THF as solvents. A broad substrate scope has been demonstrated by coupling five imidate donors with eight glycosyl acceptors, in which most of the glycosylations lead to high yield and exclusively 1,2-cis-α- or 1,2-trans-ß-selectivity. Applying this glycosylation protocol and with an iterative manner, the unprecedented α/ß-alternate (1â4)-glucans up to a 16-mer have been synthesized. Differently from amylose, that adopts a compact helicoidal arrangement, the synthetic amycellulose features an extended ribbon-like conformation, comparable to the extended shape of cellulose.
RESUMO
An exceptional level of control over the direction of the (2,3)-sigmatropic rearrangement between N-oxides and alkoxylamine is achieved by simply changing the solvent in which they are dissolved. Protic solvents like water, methanol and hexafluoroisopropanol favour the N-oxide form, while other solvents like acetone, acetonitrile and benzene favour the alkoxylamine. The reaction temperature and nature of the substituents on the alkene affect the rate of rearrangement. A N-oxide fragment was attached to two fluorescent molecules and acted as an on/off switch for their fluorescence. The conversion of alkoxylamines into the corresponding N-oxides has not previously been described and is here termed the 'Reverse Meisenheimer Rearrangement'.