No Impact of Contact Between the Medial Collar of a Hydroxyapatite-Coated Triple-Tapered Stem and the Femoral Neck on Periprosthetic Bone Mineral Density.

BACKGROUND: Hydroxyapatite-coated, triple-tapered, shorter-length stems with a medial collar have been reported with good results for a few years. We investigated whether contact between the medial collar and femoral neck affects clinical outcomes and changes in bone mineral density (BMD) in patients who have this type of stem in their total hip arthroplasty construct. METHODS: This was a retrospective, single-center study involving 62 patients scheduled for unilateral total hip arthroplasty using a hydroxyapatite-coated, triple-tapered, shorter-length stem who were followed for at least 1 year postoperatively. All patients had a Dorr type B femoral canal shape. Contact between the medial collar and the femoral neck was evaluated by computed tomography at the third postoperative month, and patients were classified into 2 groups. Postoperative clinical outcomes were investigated by the Western Ontario and McMaster Universities Arthritis Index and the Japanese Orthopaedic Association scores; radiological evaluation included stem fixation, spot welds and cortical hypertrophy, postoperative 3-dimensional stem alignment, and periprosthetic BMD changes. RESULTS: There were 51 patients in the Contact + group (collar and neck contact) and 11 in the Contact-group (no contact). There were no differences between the 2 groups in the improvement of Western Ontario and McMaster Universities Arthritis Index and Japanese Orthopaedic Association scores, stem fixation, occurrence of cortical hypertrophy, or 3-dimensional stem alignment. Radiolucent lines were present in zones 3, 4, and 5 in 6 patients (12%) in the Contact + group only, who had no statistical difference between the 2 groups. Bone mineral density (BMD) decreased most in zone 7 in both groups, with no difference between the 2 groups. CONCLUSIONS: The presence or absence of contact between the medial collar and femoral neck did not affect postoperative BMD changes or radiological or clinical results. LEVEL OF EVIDENCE: Therapeutic Level III.

A smaller femoral stem is needed for asian females.

BACKGROUND: Current femoral implants are manufactured based on Western anatomical structures and may be too large for smaller physiques, such as those of Asian females. This study reviewed the femoral stem size distribution used in a high-volume total hip arthroplasty (THA) practice and evaluated malalignment in patients receiving a size one implant. MATERIALS AND METHODS: A consecutive cohort of female patients self-reported as Asian (257 patients, 331 hips) or Caucasian (158 patients and 190 hips) were retrospectively evaluated. A single femoral stem type was used in all cases, performed by a single surgeon. Global hip offset (GHO) and leg length difference (LLD) were measured before and 6 weeks following THA. Differences between races were evaluated through Mann-Whitney U tests and chi-squared tests for continuous and categorical variables, respectively. RESULTS: The proportion of size one implants was higher amongst Asian patients (20.5%) than Caucasian patients (2.6%) (p < 0.001). A LLD greater than 6 mm was noted in 24.6% of size one patients and 11.4% of all other sizes (p = 0.010). Varus malalignment occurred in 47.9% of size one patients and 22.1% of all other sizes (p < 0.001). No fractures occurred in size one patients, and nine fractures (one intraoperative and eight post-operative) occurred in all other sizes (p = 0.258). CONCLUSION: The high proportion of size one stems required in Asian females and the higher incidence of LLD > 6 mm and varus malalignment suggest a distinct need for smaller femoral implants, especially for Asian females.

Total hip arthroplasty with femoral shortening osteotomy using polished cemented stem vs. modular cementless stem in patients with Crowe type IV developmental dysplasia of the hip.

INTRODUCTION: There is still little information regarding the advantages of a using a polished tapered stem for Crowe Type IV developmental dysplasia of the hip (DDH). This study aimed to investigate the mid-term clinical and radiological outcomes of primary total hip arthroplasty (THA) with femoral shortening osteotomy using modular and polished tapered stems and to compare the results between the modular and polished tapered stems. MATERIALS AND METHODS: This retrospective review included 32 patients (37 hips) with Crowe type IV DDH who underwent primary THA with femoral shortening osteotomy using a modular stem (cementless group, 14 hips) or a polished tapered stem (cement group, 23 hips) between 1996 and 2018. Clinical data and radiographic assessments were reviewed to analyze the differences between the two groups. RESULTS: The mean duration of patient follow-up of the cementless group (134.4 months) was longer than that of the cement group (75.5 months). There were no differences in clinical results, time of bone union, and survival rate between the two groups. However, the cementless group exhibited a higher ratio of intraoperative fracture and thinning of cortical bone including stress shielding, medullary changes, stem alignment changes, and osteolysis, compared to the cement group. CONCLUSIONS: The findings of this study suggest that THA with femoral shortening osteotomy using both cemented and modular stems can provide satisfactory results. However, considering the occurrence of intraoperative fracture and radiographic analysis in the current study, the cement stem may have an advantage for patients with bone fragility and deterioration in bone quality.

The 'critical trochanter angle' does not show superiority over the CCD angle in predicting varus stem alignment in cementless short-stem total hip arthroplasty.

PURPOSE: Varus positioning of the femoral stem can affect the hip offset (HO). The critical trochanter angle (CTA) was introduced in 2019 as a novel geometric angle, to predict varus stem alignment in cementless straight stem THA. The aim of this study was to evaluate the applicability of the CTA as a predictor for stem alignment in THA with a cementless neck resecting short stem. PATIENTS AND METHODS: In this retrospective study, 106 patients (index surgery 2014-2019) with unilateral THA and a morphologically healthy contralateral hip as a reference (Kellgren-Lawrence ≤ 1) were included. A cementless short stem with meta-diaphyseal fixation and press-fit cup was implanted in all cases. Stem alignment, CCD angle, CTA and offset reconstruction were measured on preoperative and 3 months postoperative AP radiographs of the pelvis. RESULTS: Preoperative lower CTA and lower CCD angle were positively correlated (r = 0.472; p < 0.001). Higher varus stem alignment is correlated with lower CTA (r = - 0.384; p < 0.001) and lower CCD angle (r = - 0.474; p < 0.001). A CTA of 23.1° or lower showed a sensitivity of 59.1% and a specificity of 87.1% (AUC: 0.733) and a CCD angle of 132.75° or lower a sensitivity of 68.2% and a specificity of 80.6% (AUC: 0.77) for a varus stem alignment > 3°. CONCLUSION: The CTA is also applicable in cementless THA with a neck resecting short stem to evaluate risk of intraoperative varus stem positioning. The CCD angle shows higher sensitivity with marginally lower specificity. Therefore, the CTA is not superior in predicting varus stem alignment in short-stem THA. LEVEL OF EVIDENCE: IV.

Does difference in stem design affect accuracy of stem alignment in total hip arthroplasty with a CT-based navigation system?

The efficacy of a computed tomography (CT)-based navigation system to accurately position the stem for intended alignment is unclear. In addition, the influence of stem design on the accuracy of insertion is unknown. We therefore retrospectively compared the accuracy and precision for the intended alignment of two different designs of femoral stem which were implanted with or without the navigation system. Forty-nine total hip arthroplasties (THAs) using a tapered wedge stem and 91 THAs using an anatomic stem were evaluated for the navigation group. Thirty-three THAs using the tapered wedge stem and 15 THAs using the anatomic stem were controls for the non-navigation group. Differences between postoperative measurement and preoperative planning were compared among the groups. In the navigation groups, accuracy (mean absolute difference) and precision (95% limits of agreement) of stem anteversion were 4.3° and ± 10.1° in the tapered wedge stem and 3.1° and ± 6.9° in the anatomic stem. In the non-navigation groups, these were 6.0° and ± 15.2° and 4.8° and ± 12.4°, respectively. The accuracy and precision in the navigation groups were significantly superior to those in the non-navigation group, and those in the anatomic stem group were significantly superior to those in the tapered wedge group. Using the CT-based navigation system, the accuracy and precision for intended stem anteversion were improved. When compared under guidance of navigation system, the accuracy and precision for intended stem anteversion in the anatomic stem were superior to those in the tapered wedge stem.

The direct anterior approach provokes varus stem alignment when using a collarless straight tapered stem.

INTRODUCTION: Inaccurate stem implantation can cause unsatisfactory offset reconstruction and may result in insufficient gluteal muscle function or aseptic loosening. In this study, stem alignment of a collarless straight tapered HA-coated stem was retrospectively analyzed during the learning phase of the direct anterior approach (DAA) for primary total hip arthroplasty (THA). MATERIAL AND METHODS: From Jan 2013 to Jun 2015, a total of 93 cementless THA were implanted in patients with unilateral coxarthrosis via the DAA in a two surgeon setting using the Corail® or Trendhip® stem (DePuy Synthes or Aesculap). Varus(+)/Valgus(-) stem alignment was analyzed in postoperative anteroposterior pelvic radiographs. Effects on femoral offset reconstruction and correlation to patient's individual clinical and radiological parameters were evaluated. RESULTS: 55 stems were implanted in varus (59%), 32 in neutral (34%) and 6 in valgus alignment (7%). Mean stem alignment in varus position was + 2.2° (SD ± 1.4°). Varus alignment was associated with male gender and preoperative coxa vara deformity: low CCD, high femoral offset and long thigh neck (p ≤ 0.001). Alignment was not correlated to femoral offset restoration, BMI or leg length difference. Mean cup inclination was 44° (SD ± 4.7°) and 90% matched the coronal Lewinnek safe zone. CONCLUSION: In the learning curve, the DAA can be associated with a high incidence of varus stem alignment when using a straight tapered stem, especially in men with coxa vara deformity: low CCD, high femoral offset and long thigh neck. An insufficient capsule release makes femur exposure more difficult and might be an additional factor for this finding. We recommend intraoperative X-ray in the learning phase of the DAA to verify correct implant positioning and to adjust offset options.

Long-Term Clinical and Radiological Outcomes of Primary Total Hip Arthroplasty with Modular Femoral Stem in Middle-Aged Asian Patients.

BACKGROUND: There is insufficient information regarding the outcome of primary total hip arthroplasty (THA) with the modular femoral stem in middle-aged patients. This study aimed to assess long-term clinical and radiological outcomes of primary THA using the original or modified modular hip system (S-ROM) in middle-aged Asian patients. METHODS: A retrospective review identified 98 primary THAs that used a modular stem and were undertaken between 1997 and 2009 in patients younger than 58 years, for whom at least 5 years of follow-up data were available. Clinical data and radiograph assessments were reviewed to analyze differences between the original and modified modular stem groups. RESULTS: The mean patient follow-up duration was 148.3 months, and the follow-up ratio was 89.1%. The Kaplan-Meier analysis revealed that the survival rate of both stems was 98.9% at 10 years and 89.8% at 15 years. Although no statistically significant differences in the survival rate were observed between the stem designs, the original stem group had increased incidence of thigh pain compared with the modified stem group. In total, 12 and 54 hips showed change in stem alignment and osteolysis, respectively. CONCLUSION: The findings of this study show that the modular stems have a high survival rate, and results suggest positive outcomes among the Asian population over the long term. Although there were very few differences between the stem designs, the results suggest that the modified modular stem could prevent thigh pain and that selection of the implant based on the bone shape is important for THA.

The effects of patient characteristics and stem alignment on distal femoral cortical hypertrophy after cemented polished tapered stem implantation.

BACKGROUND: The objective of this study was to evaluate the results of over 10 years of total hip arthroplasty (THA) practice with ExeterTM stems and the clinical relevance of distal femoral cortical hypertrophy (DFCH). METHODS: We retrospectively reviewed 127 hips (120 patients) that had undergone THA with ExeterTM stems between 2004 and 2007. Kaplan-Meier survival analyses for the stem of all 127 hips were performed using different endpoints. Of 127 hips, 100 (94 patients) had complete 10-year follow-up data, including the Japanese Orthopaedic Association Hip Disease Evaluation Questionnaire (JHEQ) as the patient-reported outcomes, and the clinical relevance of DFCH was analyzed using multivariable logistic regression analysis. RESULTS: The survival of the stem with the endpoint of re-operation for loosening, > 5-mm subsidence, and re-operation for any reason were 100%, 99.1% (95% CI 97.5-100%), and 98.3% (95% CI 96.0-100%), respectively. Of 100 hips followed completely for 10 years, DFCH occurred in 20 hips (20%). The satisfaction and pain visual analog scale of JHEQ revealed high satisfaction and less pain in patients with DFCH. By multivariate logistic regression analysis, body weight > 55 kg (odds ratio: 2.88, p = 0.035) and varus stem alignment (odds ratio: 6.56, p = 0.003) were found to be predictors for DFCH. CONCLUSIONS: The incidence of DFCH with the ExeterTM stem was 20%. A body weight > 55 kg and varus stem alignment are predictors for future DFCH. DFCH with the ExeterTM stem indicates a good outcome with less hip pain.

Variations in sagittal and coronal stem tilt and their impact on prosthetic impingement in total hip arthroplasty.

Optimization of the combined anteversion of cup and stem has been emphasized to avoid prosthetic impingement in total hip arthroplasty (THA). However, no study has focused on the impact of variations in sagittal and coronal stem tilt against the whole femur on prosthetic range of motion. The purposes of the present study were a) to quantify the anatomical variation of sagittal and coronal tilt of the proximal canal axis against the femoral retrocondylar coordinate system, that is variation of sagittal and coronal stem tilt and b) to determine their impact on the zone of impingement-free cup position using computer simulation. Preoperative computed tomography images of 477 femurs from 409 consecutive patients who underwent THA using computed tomography-based computer navigation were stored. Virtual implantation of an anatomical stem was performed on the navigation workstation. The safe zone of the cup position with regard to prosthetic impingement was determined by motion simulation in the range of sagittal and coronal stem tilt of the subjects. The sagittal and coronal stem tilt varied by 10°, which was smaller than the stem anteversion variation. However, there was about 3 times the difference in the impingement-free zone of cup position in the ranges of sagittal and coronal stem tilt. The safe zone was significantly decreased by posterior tilt and valgus tilt of the stem. Range of motion simulation revealed that the variations in sagittal or coronal stem tilt significantly influenced the safe zone of the cup. In conclusion, although the variations in sagittal and coronal stem tilt against the femoral retrocondylar coordinate system were small, their impact on prosthetic impingement was significant.

Outcome of extensive varus and valgus stem alignment in short-stem THA: clinical and radiological analysis using EBRA-FCA.

INTRODUCTION: The principle of implanting a calcar-guided short stem consists of an individual alignment alongside the medial calcar providing the ability of reconstructing varus and valgus anatomy in a great variety. However, still, there are broad concerns about the safety of extensive varus and valgus positioning in regard to stability, bony alterations, and periprosthetic fractures. MATERIALS AND METHODS: 216 total hip arthroplasties using a calcar-guided short stem (optimys, Mathys Ltd.) in 162 patients were included. Depending on postoperative CCD angle, hips were divided into five groups (A-E). Varus- and valgus tilt and axial subsidence were assessed by "Einzel-Bild-Roentgen-Analyse"(EBRA-FCA, femoral component analysis) over a 2-year follow-up. The incidence of stress-shielding and cortical hypertrophy as well as clinical outcome [Harris Hip Score (HHS)] were reported. RESULTS: Postoperative CCD angles ranged from 117.9° to 145.6° and mean postoperative CCD angles in group A-E were 123.3°, 128.0°, 132.4°, 137.5°, and 142.5°, respectively. After 2 years, the mean varus/valgus tilt was -0.16°, 0.37°, 0.48°, 0.01°, and 0.86°, respectively (p = 0.502). Axial subsidence after 2 years was 1.20, 1.02, 1.44, 1.50, and 2.62 mm, respectively (p = 0.043). No periprosthetic fractures occurred and none of the stems had to be revised. Rates of stress-shielding and cortical hypertrophy as well as HHS showed no significant difference between the groups. CONCLUSIONS: Valgus alignment results in increased subsidence but does not affect the clinical outcome. There is no difference in stress shielding and cortical hypertrophy between the groups. The authors recommend long term monitoring of valgus aligned stems.

Preoperative digital planning versus postoperative outcomes in total hip arthroplasty using a calcar-guided short stem: frequent valgization can be avoided.

INTRODUCTION: Modern total hip arthroplasty is largely dependent on the successful preservation of hip geometry. Thus, a successful implementation of the preoperative planning is of great importance. The present study evaluates the accuracy of anatomic hip reconstruction predicted by 2D digital planning using a calcar-guided short stem of the newest generation. METHODS: A calcar-guided short stem was implanted in 109 patients in combination with a cementless cup using the modified anterolateral approach. Preoperative digital planning was performed including implant size, caput-collum-diaphyseal angle, offset, and leg length using mediCAD II software. A coordinate system and individual scale factors were implemented. Postoperative outcome was evaluated accordingly and was compared to the planning. RESULTS: Intraoperatively used stem sizes were within one unit of the planned stem sizes. The postoperative stem alignment showed a minor and insignificant (p = 0.159) mean valgization of 0.5° (SD 3.79°) compared to the planned caput-collum-diaphyseal angles. Compared to the planning, mean femoral offset gained 2.18 (SD 4.24) mm, while acetabular offset was reduced by 0.78 (SD 4.36) mm during implantation resulting in an increased global offset of 1.40 (SD 5.51) mm (p = 0.0094). Postoperative femoroacetabular height increased by a mean of 5.00 (SD 5.98) mm (p < 0.0001) compared to preoperative measures. DISCUSSION: Two-dimensional digital preoperative planning in calcar-guided short-stem total hip arthroplasty assures a satisfying implementation of the intended anatomy. Valgization, which has been frequently observed in previous short-stem designs, negatively affecting offset, can be avoided. However, surgeons have to be aware of a possible leg lengthening.

The sagittal stem alignment and the stem version clearly influence the impingement-free range of motion in total hip arthroplasty: a computer model-based analysis.

PURPOSE: The component alignment in total hip arthroplasty influences the impingement-free range of motion (ROM). While substantiated data is available for the cup positioning, little is known about the stem alignment. Especially stem rotation and the sagittal alignment influence the position of the cone in relation to the edge of the socket and thus the impingement-free functioning. Hence, the question arises as to what influence do these parameters have on the impingement-free ROM? METHODS: With the help of a computer model the influence of the sagittal stem alignment and rotation on the impingement-free ROM were investigated. The computer model was based on the CT dataset of a patient with a non-cemented THA. In the model the stem version was set at 10°/0°/-10° and the sagittal alignment at 5°/0°/-5°, which resulted in nine alternative stem positions. For each position, the maximum impingement-free ROM was investigated. RESULTS: Both stem version and sagittal stem alignment have a relevant influence on the impingement-free ROM. In particular, flexion and extension as well as internal and external rotation capability present evident differences. In the position intervals of 10° sagittal stem alignment and 20° stem version a difference was found of about 80° in the flexion and 50° in the extension capability. Likewise, differences were evidenced of up to 72° in the internal and up to 36° in the external rotation. CONCLUSIONS: The sagittal stem alignment and the stem torsion have a relevant influence on the impingement-free ROM. To clarify the causes of an impingement or accompanying problems, both parameters should be examined and, if possible, a combined assessment of these factors should be made.

Stem size and stem alignment affects periprosthetic fracture risk and primary stability in cementless total hip arthroplasty.

The ideal stem size and stem position is important for the success of total hip arthroplasty, since it can affect early implant loosening and periprosthetic fractures (PPF). This study aimed to investigate how small deviations from the ideal stem size and position influences the PPF risk and primary stability. Six experienced surgeons performed preoperative templating based on which the benchmark size for each femur was determined. Consecutive implantations were performed in six cadaveric femur pairs-one side was implanted with an undersized stem followed by the benchmark size and the contralateral side with a benchmark size followed by an oversized stem (Corail, Depuy Synthes). Moreover, three different alignments (six varus, six neutral, six valgus-undersized) were compared using 18 femurs. Cortical strains during broaching and implantation were measured, and laser scans were used to determine final stem position. All specimens underwent dynamic loading. Primary stability was estimated from stem subsidence and pull-out forces. Templated stem size varied between surgeons (±1 size; p = 0.005). Undersizing increased stem subsidence by 320% (p < 0.001). Oversized stems exhibited 52% higher pull-out forces (p = 0.001) and 240% higher cortical strains (p = 0.056). Cortex strains increased with varus alignment (R2 = 0.356, p = 0.011) while primary stability decreased with valgus stem alignment (p = 0.043). Surgeons should be aware that small deviations from the ideal stem size and malalignments of the stem can significantly alter the mechanical situation and affect the success of their surgery.

Stem Alignment With the Tapered Wedge Cementless Stem "Accolade II" Does Not Affect Bone Mineral Density Over 5 Years After Total Hip Arthroplasty.

Background: This study aimed to investigate the relationship between 3-dimensional (3D) alignment and postoperative bone mineral density (BMD) changes with Accolade II tapered wedge stems, which have a different proximal shape from other tapered wedge stems, up to 5 years after primary total hip arthroplasty. Methods: We retrospectively analyzed the hips of 89 patients who underwent total hip arthroplasty using the second-generation proximally coated cementless stem (Accolade II; Stryker Orthopedics, Mahwah, NJ) at our institution from 2014 to 2018 over a 5-year follow-up. We evaluated the relationship between stem alignment, measured using 3D-templating software, and BMD changes in the 7 Gruen zones and compared the data with those from a former study using other short taper-wedge stems. Results: BMDs in zones 1 and 7 continued to decrease gradually every year after surgery, and BMD in zone 7 showed the largest decrease (21%) from baseline over 5 years. No correlation was found between stem alignment (varus/valgus, flexion/extension, and anteversion/retroversion) and changes in BMD in each zone over 5 years. Conclusions: Our data showed no correlation between 3D stem alignment and changes in BMD in each Gruen zone over 5 years. This suggests that the Accolade II stem may fit better into any shape of the proximal medullary canal because of its unique characteristics.

Stem alignment with short tapered-wedge cementless stems affects bone mineral density continuously for at least 5 years after primary total hip arthroplasty.

AIM: This study aimed to assess the relationship between the three-dimensional (3D) alignment of short tapered-wedge cementless stems and bone mineral density (BMD) changes in patients followed up for 5 years after total hip arthroplasty (THA). METHODS: We retrospectively analysed the hips of 52 patients who underwent THA using short tapered-wedge cementless stems at our institution from 2013 to 2016 with complete 5-year follow-up data. We evaluated the relationship between stem alignment, measured using a 3D-templating software, and BMD changes in the 7 Gruen zones. RESULTS: After 1 year, significant negative correlations between varus insertion and a decrease in BMD in zone 7 and between flexed insertion and decreases in BMD in zones 3 and 4 were noted. After 5 years, significant negative correlations between varus insertion and a decrease in BMD in zone 7 and between flexed insertion and decreases in BMD zones 2, 3, and 4 were observed. With increased amounts of varus/flexion stem alignment, the amount of BMD loss decreased. There was no correlation between anteverted stem insertion and changes in BMD levels. CONCLUSIONS: Our data showed that stem alignment affects BMD based on 5-year follow-up data after surgery. Careful observation is necessary, especially when using short tapered-wedge cementless stems, as stem alignment may affect changes in BMD levels more than 5 years after surgery.

Bone mineral density around cementless short stems after reverse shoulder arthroplasty: changes over time and its relationship to stem positioning.

Background: There are numerous reports of bone adaptation observed on plain radiography studies after the use of cementless short stems in reverse shoulder arthroplasty. However, reports on changes in bone mineral density (BMD) around the stem using dual-energy X-ray absorptiometry (DEXA) are prominently absent. In the present study, we measured BMD around the stem using DEXA and investigated changes over time from postoperative year 1 to year 2. Additionally, the relationship between BMD changes, filling ratio, and stem alignment was examined. Methods: Forty-seven patients with short cementless stems who could be assessed via DEXA at 1-2 years postoperatively were included. After dividing the zones around the stem into 5, the BMD in each zone was measured, in addition to BMD changes and amount of change from postoperative year 1 to year 2. The relationship between filling ratio and stem alignment on postoperative plain radiography was assessed. Results: A significant decrease in BMD in zone 3 was observed between postoperative year 1 and year 2 (P = .02). Regarding filling ratio and stem alignment, a negative correlation between valgus stem alignment and BMD change observed in zone 1 (r = -0.470, P < .01). In addition, stem valgus greater than 6° correlated with a significant decrease in BMD in zone 1. (P = .01). No significant differences were found in the other zones. Furthermore, there was no correlation between filling ratio and BMD change. Conclusion: In reverse shoulder arthroplasty cementless short stems, changes that that occurred between postoperative year 1 to year 2 demonstrated a decrease in BMD in zone 3. In addition, a decrease in BMD in zone 1 was observed with a stem alignment of valgus 6° or higher, suggesting that stem alignment within valgus 6° is required to prevent a decrease in BMD.

Chronological Changes in Sagittal Femoral Bowing after Primary Cementless Total Hip Arthroplasty: A Comparative 3D CT Study.

Little is known about dynamic changes of femoral anatomy after total hip arthroplasty (THA), in particular about sagittal femoral bowing (SFB). A 3D CT study was designed to evaluate the chronological changes of SFB after cementless femoral stem implantation for primary THA. Ten patients who underwent unilateral primary THA with a cementless femoral stem, with 2 consecutive CT scans (extending from the fourth lumbar vertebra to the tibial plateaus), performed before THA and at least 3 years after THA, were enrolled. The 3D models of femurs were created using image segmentation software. Using the two CT scans, SFB values of the proximal and middle thirds were calculated on the replaced and untreated sides by two different observers. Eight anatomical stems and two conical stems were involved. The post-operative CT was performed at an average follow-up of 6.5 years after THA (range: 3-12.5). The measurements performed by the two observers did not differ in the proximal and middle regions. A significant difference between the pre-operative and post-operative SFB compared to the untreated side was found in the proximal femur segment (p = 0.004). Use of a cementless stem in THA induced chronological changes in SFB of the proximal femur, after a minimum timespan of 3 years.

The Relationship between Femoral Stem Tilt and Stem Length in Total Hip Arthroplasty: A Retrospective Case-Control Study.

Background: The current trend of using short femoral stems in total hip arthroplasty (THA) is associated with angular deviation of the femoral stem towards the native femoral axis. The purpose of this study was to compare the difference in stem tilt angle between two different stems with a similar design except for the stem length. Methods: This is a retrospective review of 66 patients who underwent primary THA between April 2012 and May 2016, using a trans-gluteal direct lateral approach by a single surgeon. We evaluated the femoral stem tilt angle in both the coronal and sagittal planes and performed multivariate logistic regression analysis to evaluate possible risk factors. We also simulated the range of motion (ROM) of the hip joint using three-dimensional computer-aided design software (SolidWorks, 2016) to examine the clinical significance of femoral stem tilt. Results: The mean coronal tilt angle was 1.8° ± 1.0° in the conventional stem group and 1.6° ± 1.1° in the short stem group, showing no statistically significant difference between the groups (p = 0.570). However, the mean sagittal tilt angle was 4.0° ± 2.0° in the conventional stem group and 7.8° ± 2.0° in the short stem group (p < 0.001). The stem type and stem length had a linear correlation with the sagittal tilt angle (p < 0.001) in multivariate regression analysis. A simulated hip ROM demonstrated a 3.8° decrease in extension in proportion to a 3.8° increase in the mean sagittal stem tilt angle of the short femoral stem. Conclusions: Anterior femoral stem tilting in the sagittal plane was prominent when the shorter stem was used, and anterior tilting was responsible for decreased ROM in hip extension.

Peri-prosthetic bone remodeling of hydroxyapatite-coated compaction short stem was not affected by stem alignment.

BACKGROUND: To improve implant survival through accelerated early bone remodeling during total hip arthroplasty (THA), hydroxyapatite (HA) is widely used as a bioactive coating, which is believed to enhance initial fixation by osseointegration. We aimed to investigate the relationship between stem insertion alignment and postoperative bone mineral density (BMD) changes in patients with full hydroxyapatite-coated (HA) compaction short stem and short tapered-wedge stem. METHODS: This retrospective cohort study enrolled 115 consecutive patients (115 joints) undergoing THA using the full HA compaction short (n = 59) and short tapered-wedge (n = 56) stems. Stem alignment, including anteversion, valgus, and anterior tilt were measured by a three-dimensional template using computed tomography data. Post-operative peri-prosthetic BMD was measured by dual-energy X-ray absorptiometry. The relationship between stem alignment and BMD changes in the stems was analyzed. RESULTS: Patterns of peri-prosthetic BMD changes were similar in both groups. Stem insertion alignments of anteversion, valgus, and anterior tilt were different between the two stem types. Stem alignment of valgus and anterior tilt did not affect peri-prosthetic BMD in either of the stem type. An absolute anteversion difference between stem anteversion and original canal anteversion caused significant peri-prosthetic BMD loss in Gruen zones one and seven in the tapered-wedge stem. However, stem alignment of absolute anteversion difference did not affect BMD changes in the HA compaction stem. CONCLUSIONS: Peri-prosthetic bone remodeling remained unaffected by stem alignment after THA with the new short full HA compaction stem.

Does femoral morphology and stem alignment influence outcomes of cementless total hip arthroplasty with proximally coated double-tapered titanium stems?

INTRODUCTION: Stem subsidence and thigh pain can cause significant patient dissatisfaction after cementless THA. The purpose of this study was to examine the effect of proximal-femoral morphology and stem alignment on clinical outcomes using a double-tapered, cementless titanium femoral component. METHODS: We retrospectively reviewed 281 consecutive, primary THAs from 2012 to 2014 with a mean follow-up of 4 years. Preoperative radiographs were used to assess femoral neck shaft angle (FNS), canal flare index (CFI), Dorr classification, and greater trochanter (GT) overhang. Postoperative radiographs were used to determine stem alignment and 6-week follow-up radiographs were used to determine subsidence. Clinical outcomes included thigh pain, leg-length discrepancy (LLD), patient-reported outcome measures (PROMs) and revision surgeries. RESULTS: 271 stems (96%) did not subside (<4 mm) and 10 (4%) showed evidence of subsidence (>4 mm). Subsidence was significantly associated with subsequent revision surgery (p < 0.01). 278 stems (99%) were in neutral alignment and 3 in varus (1%). Alignment did not significantly influence subsidence, thigh pain, LLD, revisions, or PROMs. Femoral morphology measures (FNS, CFI, Dorr classification, and GT overhang) were not significantly associated with stem alignment, subsidence, LLD, or revisions. CFI was significantly associated with intraoperative calcar fractures (p = 0.02). GT overhang was associated with thigh pain (p = 0.03) and FNS was inversely associated with postoperative HOOS scores. CONCLUSIONS: Subsidence and proximal-femoral morphology are potential sources of postoperative morbidity in certain cementless THA patients. In accordance with prior studies, CFI was identified as a potential risk factor for intraoperative calcar fractures. More research into preoperative femoral morphologies, such as GT overhang and FNS, is warranted as these may contribute to unsatisfactory results related to cementless THA.