Defective Tungsten Oxides with Stacking Faults for Proton Exchange Membrane Green-Hydrogen Generation.

Defects can introduce atomic structural modulation and tailor performance of materials. Herein, it demonstrates that semiconductor WO3 with inert electrocatalytic behavior can be activated through defect-induced tensile strains. Structural characterizations reveal that when simply treated in Ar/H2 atmosphere, oxygen vacancies will generate in WO3 and cause defective structures. Stacking faults are found in defects, thus modulating electronic structure and transforming electrocatalytic-inert WO3 into highly active electrocatalysts. Density functional theory (DFT) calculations are performed to calculate *H adsorption energies on various WOx surfaces, revealing the oxygen vacancy composition and strain predicted to optimize the catalytic activity of hydrogen evolution reaction (HER). Such defective tungsten oxides can be integrated into commercial proton exchange membrane (PEM) electrolyser with comparable performance toward Pt-based PEM. This work demonstrates defective metal oxides as promising non-noble metal catalysts for commercial PEM green-hydrogen generation.

Large-Scale Atomic Strain Defects on Palladium Surfaces for Enhanced Oxygen Reduction and Zinc-Air Batteries.

Designing nano-electrocatalysts rich in surface defects is critical to improve their catalytic performance. However, prevailing synthesis techniques rely heavily on complex procedures that compromise defect extensiveness and uniformity, casting a high demand for methods capable of synthesizing large-scale crystalline defects. An innovative design strategy is herein proposed that induces ample strain/dislocation defects during the growth of palladium (Pd), which is well-known as a good oxygen reduction reaction (ORR) catalyst. The controlled defect engineering on Pd core is achieved by the tensile stress exerted from an intentionally applied Fe3O4 skin layer during synthesis, which changes the surface free energy of Pd to stabilize the defect presence. With such large-scale crystalline defects, this Pd catalyst exhibits significantly higher ORR activity than commercial Pt/C, enabling its promising future in zinc-air battery catalysis. Additionally, the protective Fe3O4 skin covering the catalyst also enhances its catalytic stability. Theoretical calculations show that the superior catalytic property of such defect-engineered Pd is associated with the correspondingly modified adsorption energy of *O intermediates onto its surface, which further improves the reaction rate and thus boosts ORR kinetics. Findings here are expected to provide a paradigm for designing efficient and stable metal catalysts with plentiful large-scale strain defects.

Ligand and Strain Synergistic Effect in NiFeP0.32 LDH for Triggering Efficient Oxygen Evolution Reaction.

Developing efficient water-splitting electrocatalysts to accelerate the slow oxygen evolution reaction (OER) kinetics is urgently desired for hydrogen production. Herein, ultralow phosphorus (P)-doped NiFe LDH (NiFePx LDH) with mild compressive strain is synthesized as an efficient OER electrocatalyst. Remarkably, NiFePx LDH with the phosphorus mass ratio of 0.32 wt.% and compressive strain ratio of 2.53% (denoted as NiFeP0.32 LDH) exhibits extraordinary OER activity with an overpotential as low as 210 mV, which is superior to that of commercial IrO2 and other reported P-based OER electrocatalysts. Both experimental performance and density function theory (DFT) calculation demonstrate that the doping of P atoms can generate covalent Fe─P coordination bonds and lattice distortion, thus resulting in the consequent depletion of electrons around the Fe active center and the downward shift of the d-band center, which can lead to a weaker adsorption ability of *O intermediate to improve the catalytic performance of NiFeP0.32 LDH for OER. This work provides novel insights into the distinctive coordinated configuration of P in NiFePx LDH, which can result in superior catalytic performance for OER.

Optoelectronic and photocatalytic behaviour of a type-II GaAlS2/HfS2heterostructure:ab initiostudy.

Theoretical examination based on first principle computation has been conducted for van der Waals heterostructure (vdwHS) GaAlS2/HfS2including structural, optoelectronic and photocatalytic characteristics. From the adhesion energy calculation, the AB configuration of GaAlS2/HfS2vdwHS is the most stable. A type-II GaAlS2/HfS2vdwHS is a dynamically and thermally stable structure. The band edge position, projected band, and projected charge densities verify the type-II alignment of GaAlS2/HfS2vdwHS. For GaAlS2/HfS2, GaAlS2is acting as a donor and HfS2is acting as an acceptor ensured by the charge density difference plot. The electron localized function validates the weak van der Waals interaction between GaAlS2and HfS2. The GaAlS2/HfS2vdwHS possess an indirect bandgap of 1.54 eV with notable absorption in the visible range. The findings assure that the GaAlS2/HfS2vdwHS is an efficient photocatalyst for pH 4-8. The band alignment of GaAlS2/HfS2is suitable for Z-scheme charge transfer. The strain influenced band edge suggests that the GaAlS2/HfS2vdwHS remains photocatalytic for strain-4%to+6%in both cases of uniaxial and biaxial strains.

Harnessing the Synergistic Interplay between Atomic-scale Vacancies and Ligand Effect to Optimize the Oxygen Reduction Activity and Tolerance Performance.

Defect engineering is an effective strategy for regulating the electrocatalysis of nanomaterials, yet it is seldom considered for modulating Pt-based electrocatalysts for the oxygen reduction reaction (ORR). In this study, we designed Ni-doped vacancy-rich Pt nanoparticles anchored on nitrogen-doped graphene (Vac-NiPt NPs/NG) with a low Pt loading of 3.5 wt.% and a Ni/Pt ratio of 0.038:1. Physical characterizations confirmed the presence of abundant atomic-scale vacancies in the Pt NPs induces long-range lattice distortions, and the Ni dopant generates a ligand effect resulting in electronic transfer from Ni to Pt. Experimental results and theoretical calculations indicated that atomic-scale vacancies mainly contributed the tolerance performances towards CO and CH3OH, the ligand effect derived from a tiny of Ni dopant accelerated the transformation from *O to *OH species, thereby improved the ORR activity without compromising the tolerance capabilities. Benefiting from the synergistic interplay between atomic-scale vacancies and ligand effect, as-prepared Vac-NiPt NPs/NG exhibited improved ORR activity, sufficient tolerance capabilities, and excellent durability. This study offers a new avenue for modulating the electrocatalytic activity of metal-based nanomaterials.

How Size and Strain Effect Synergistically Improve Electrocatalytic Activity: A Systematic Investigation Based on PtCoCu Alloy Nanocrystals.

To reveal how the size effect and strain effect synergistically regulate the mass activity (MA) and specific activity (SA) of Pt alloy nanocrystal catalysts in oxygen reduction reaction (ORR), remains to be difficult due to the highly entangled factors. In this work, six ternary PtCoCu catalysts with sequentially changed composition, size, and compression strain are prepared. It is found that the smaller the alloy particles, the higher the electrochemical active surface area (ECSA) and MA values, that is, the particle size plays a decisive role in the size of the ECSA and MA. While, along alloy size decrease, the intrinsic activity SA first increases, then remains unchanged, and finally rapidly increases again. This detailed analysis shows that for the alloys above 4 nm, it is the surface coordination number that decides the SA, while for those below 4 nm, it is the well-regulated compression strain that determines the SA. Particularly, Pt47 Co26 Cu27 demonstrates the MA of 1.19 A mgPt -1 and SA of 1.48 mA cm-2 , being 7.9 and 6.4 times those of commercial Pt/C respectively, representing an especially superior ORR catalyst.

Breathing-Driven Self-Powered Pyroelectric ZnO Integrated Face Mask for Bioprotection.

Rapid spread of infectious diseases is a global threat and has an adverse impact on human health, livelihood, and economic stability, as manifested in the ongoing coronavirus disease 2019 (COVID-19) pandemic. Even though people wear a face mask as protective equipment, direct disinfection of the pathogens is barely feasible, which thereby urges the development of biocidal agents. Meanwhile, repetitive respiration generates temperature variation wherein the heat is regrettably wasted. Herein, a biocidal ZnO nanorod-modified paper (ZNR-paper) composite that is 1) integrated on a face mask, 2) harvests waste breathing-driven thermal energy, 3) facilitates the pyrocatalytic production of reactive oxygen species (ROS), and ultimately 4) exhibits antibacterial and antiviral performance is proposed. Furthermore, in situ generated compressive/tensile strain of the composite by being attached to a curved mask is investigated for high pyroelectricity. The anisotropic ZNR distortion in the bent composite is verified with changes in ZnO bond lengths and OZnO bond angles in a ZnO4 tetrahedron, resulting in an increased polarization state and possibly contributing to the following pyroelectricity. The enhanced pyroelectric behavior is demonstrated by efficient ROS production and notable bioprotection. This study exploring the pre-strain effect on the pyroelectricity of ZNR-paper might provide new insights into the piezo-/pyroelectric material-based applications.

Tuning Reaction Pathways of Electrochemical Conversion of CO2 by Growing Pd Shells on Ag Nanocubes.

The electrochemical carbon dioxide reduction reaction (CO2RR) has been studied on Ag, Pd, Ag@Pd1-2L nanocubes using a combination of in situ characterization and density functional theory calculations. By manipulating the deposition and diffusion rates of Pd atoms on Ag nanocubes, Ag@Pd core-shell nanocubes with a shell thickness of 1-2 atomic layers have been successfully synthesized for CO2RR. Pd nanocubes produce CO with high selectivity due to the transformation of Pd to Pd hydride (PdH) during CO2RR. In contrast, PdH formation becomes more difficult in Ag@Pd1-2L core-shell nanocubes, which inhibits CO production from the *HOCO intermediate and thus tunes the reaction pathway toward HCOOH. Ag nanocubes exhibit high selectivity toward H2, and there is no phase transition during CO2RR. The results demonstrate that the CO2RR reaction pathways can be manipulated through engineering the surface structure of Pd-based catalysts by allowing or preventing the formation of PdH.

Elucidation of Structure-Activity Relations in Proton Electroreduction at Pd Surfaces: Theoretical and Experimental Study.

The structure-activity relationship is a cornerstone topic in catalysis, which lays the foundation for the design and functionalization of catalytic materials. Of particular interest is the catalysis of the hydrogen evolution reaction (HER) by palladium (Pd), which is envisioned to play a major role in realizing a hydrogen-based economy. Interestingly, experimentalists observed excess heat generation in such systems, which became known as the debated "cold fusion" phenomenon. Despite the considerable attention on this report, more fundamental knowledge, such as the impact of the formation of bulk Pd hydrides on the nature of active sites and the HER activity, remains largely unexplored. In this work, classical electrochemical experiments performed on model Pd(hkl) surfaces, "noise" electrochemical scanning tunneling microscopy (n-EC-STM), and density functional theory are combined to elucidate the nature of active sites for the HER. Results reveal an activity trend following Pd(111) > Pd(110) > Pd(100) and that the formation of subsurface hydride layers causes morphological changes and strain, which affect the HER activity and the nature of active sites. These findings provide significant insights into the role of subsurface hydride formation on the structure-activity relations toward the design of efficient Pd-based nanocatalysts for the HER.

Transient Strain-Induced Electronic Structure Modulation in a Semiconducting Polymer Imaged by Scanning Ultrafast Electron Microscopy.

Understanding the optoelectronic properties of semiconducting polymers under external strain is essential for their applications in flexible devices. Although prior studies have highlighted the impact of static and macroscopic strains, assessing the effect of a local transient deformation before structural relaxation occurs remains challenging. Here, we employ scanning ultrafast electron microscopy (SUEM) to image the dynamics of a photoinduced transient strain in the semiconducting polymer poly(3-hexylthiophene) (P3HT). We observe that the photoinduced SUEM contrast, corresponding to the local change of secondary electron emission, exhibits an unusual ring-shaped profile. We attribute the observation to the electronic structure modulation of P3HT caused by a photoinduced strain field owing to its low modulus and strong electron-lattice coupling, supported by a finite-element analysis. Our work provides insights into tailoring optoelectronic properties using transient mechanical deformation in semiconducting polymers and demonstrates the versatility of SUEM to study photophysical processes in diverse materials.

Strain Effect in Palladium Nanostructures as Nanozymes.

While various effects of physicochemical parameters (e.g., size, facet, composition, and internal structure) on the catalytic efficiency of nanozymes (i.e., nanoscale enzyme mimics) have been studied, the strain effect has never been reported and understood before. Herein, we demonstrate the strain effect in nanozymes by using Pd octahedra and icosahedra with peroxidase-like activities as a model system. Strained Pd icosahedra were found to display 2-fold higher peroxidase-like catalytic efficiency than unstrained Pd octahedra. Theoretical analysis suggests that tensile strain is more beneficial to OH radical (a key intermediate for the catalysis) generation than compressive strain. Pd icosahedra are more active than Pd octahedra because icosahedra amplify the surface strain field. As a proof-of-concept demonstration, the strained Pd icosahedra were applied to an immunoassay of biomarkers, outperforming both unstrained Pd octahedra and natural peroxidases. The findings in this research may serve as a strong foundation to guide the design of high-performance nanozymes.

Enhanced Sensitivity of CO on Two-Dimensional, Strained, and Defective GaSe.

The toxic gas carbon monoxide (CO) is fatal to human beings and it is hard to detect because of its colorless and odorless properties. Fortunately, the high surface-to-volume ratio of the gas makes two-dimensional (2D) materials good candidates for gas sensing. This article investigates CO sensing efficiency with a two-dimensional monolayer of gallium selenide (GaSe) via the vacancy defect and strain effect. According to the computational results, defective GaSe structures with a Se vacancy have a better performance in CO sensing than pristine ones. Moreover, the adsorption energy gradually increases with the scale of tensile strain in defective structures. The largest adsorption energy reached -1.5 eV and the largest charger transfer was about -0.77 e. Additionally, the CO gas molecule was deeply dragged into the GaSe surface. We conclude that the vacancy defect and strain effect transfer GaSe to a relatively unstable state and, therefore, enhance CO sensitivity. The adsorption rate can be controlled by adjusting the strain scale. This significant discovery makes the monolayer form of GaSe a promising candidate in CO sensing. Furthermore, it reveals the possibility of the application of CO adsorption, transportation, and releasement.

Intermetallic FePt@PtBi Core-Shell Nanoparticles for Oxygen Reduction Electrocatalysis.

The development of active and stable platinum (Pt)-based oxygen reduction reaction (ORR) electrocatalysts with good resistance to poisoning is a prerequisite for widespread practical application of fuel cells. An effective strategy for enhancing the electrocatalytic performance is to tune or control the physicochemical state of the Pt surface. Herein, we show a general surface-engineering approach to prepare a range of nanostructured Pt alloys by coating with alloy PtBi shells. FePt@PtBi core-shell nanoparticles showed the best ORR performance with a mass activity of 0.96 A mgPt -1 and a specific activity of 2.06 mA cm-2 , respectively 7 times and 11 times those of the corresponding values for benchmark Pt/C. Moreover, FePt@PtBi shows much better tolerance to methanol and carbon monoxide than conventional Pt-based electrocatalysts. The observed comprehensive enhancement in ORR performance of FePt@PtBi can be attributed to the increased compressive strain of the Pt surface due to in-plane shearing resulting from the presence of the large Bi atoms in the surface-structured PtBi overlayers, as well as charge displacement via Pt-Bi bonding which mitigates crossover issues.

Exclusive Strain Effect Boosts Overall Water Splitting in PdCu/Ir Core/Shell Nanocrystals.

Core/shell nanocatalysts are a class of promising materials, which achieve the enhanced catalytic activities through the synergy between ligand effect and strain effect. However, it has been challenging to disentangle the contributions from the two effects, which hinders the rational design of superior core/shell nanocatalysts. Herein, we report precise synthesis of PdCu/Ir core/shell nanocrystals, which can significantly boost oxygen evolution reaction (OER) via the exclusive strain effect. The heteroepitaxial coating of four Ir atomic layers onto PdCu nanoparticle gives a relatively thick Ir shell eliminating the ligand effect, but creates a compressive strain of ca. 3.60%. The strained PdCu/Ir catalysts can deliver a low OER overpotential and a high mass activity. Density functional theory (DFT) calculations reveal that the compressive strain in Ir shell downshifts the d-band center and weakens the binding of the intermediates, causing the enhanced OER activity. The compressive strain also boosts hydrogen evolution reaction (HER) activity and the strained nanocrystals can be served as excellent catalysts for both anode and cathode in overall water-splitting electrocatalysis.

Probing the Irregular Lattice Strain-Induced Electronic Structure Variations on Late Transition Metals for Boosting the Electrocatalyst Activity.

Owing to the simplicity in practice and continuous fine-tuning ability toward the binding strengths of adsorbates, the strain effect is intensively explored, especially focused on the modulation of catalytic activity in transition metal (TM) based electrocatalysts. Recently, more and more abnormal cases have been found that cannot be explained by the conventional simplified models. In this work, the strain effects in five late TMs, Fe, Co, Ni, Pd, and Pt are studied in-depth regarding the facet engineering, the surface atom density, and the d-band center. Interestingly, the irregular response of Fe lattice to the applied strain is identified, indicating the untapped potential of achieving the phase change by precise strain modulation. For the complicated high-index facets, the surface atom density has become the pivotal factor in determining the surface stability and electroactivity, which identifies the potential of high entropy alloys (HEA) in electrocatalysis. The work supplies insightful understanding and significant references for future research in subtle modulation of electroactivity based on the precise facet engineering in the more complex facets and morphologies.

Efficient Hydrogen Oxidation Catalyzed by Strain-Engineered Nickel Nanoparticles.

The hydroxide-exchange membrane fuel cell (HEMFC) is a promising energy conversion device. However, the development of HEMFC is hampered by the lack of platinum-group-metal-free (PGM-free) electrocatalysts for the hydrogen oxidation reaction (HOR). Now, a Ni catalyst is reported that exhibits the highest mass activity in HOR for a PGM-free catalyst as well as excellent activity in the hydrogen evolution reaction (HER). This catalyst, Ni-H2 -2 %, was optimized through pyrolysis of a Ni-containing metal-organic framework precursor under a mixed N2 /H2 atmosphere, which yielded carbon-supported Ni nanoparticles with different levels of strains. The Ni-H2 -2 % catalyst has an optimal level of strain, which leads to an optimal hydrogen binding energy and a high number of active sites.

Design of UAV Downwash Airflow Field Detection System Based on Strain Effect Principle.

Accurate measurement of the downwash flow field of plant protection unmanned aerial vehicles (UAVs) is essential for analyzing the spatial distribution of droplets. To realize on-line rapid detection of the downwash flow field of a multi-rotor UAV, a flexible polypropylene detection device based on the principle of full bridge strain effect was proposed. Its performance principle was based on the physical deformation caused by wind pressure. The Fluid Flow and Static Structural modules of ANSYS 16.0 finite element software were used to simulate one-way fluid-solid coupling interaction. The surface of the resistive strain gauge embedded in the flexible detecting structure responded well to wind speed variation, hence it was suitable for downwash airflow wind field detection. By solving the strain force on the surface of the flexible detection structure, the length and layout of the grating wire of the strain gauge on the surface of the flexible detection structure were optimized. Meanwhile at 4 m·s-1 wind speed, the output voltage at varied bridge flexible acquisition systems in the acquisition card was measured. Results indicated coefficient of variation of 3.67%, 1.63% and 1.5%, respectively, which proved the good data acquisition consistency of the system. Through calibration test, the regression equation for the relationship between output voltage and wind speed for three unique sensor signal measuring circuits was established. The determination coefficients R2 for single bridge, half bridge and full bridge circuits were 0.9885, 0.9866 and 0.9959, respectively. In conclusion, by applying the multi-rotor plant protection UAV test platform, the results indicated the maximum relative error of the wind speed at each sampling point of the system at 1.0 m altitude was below 5.61%. Simulated and measured value had an RMSE maximum error of 0.1246 m·s-1. Moreover, downwash airflow detection not only has high accuracy but also has high sensitivity. Thus, there is convenience and practicability in the plant protection offered by this approach. The rapid measurement of UAV wind field and the established two-dimensional wind field model can provide a basis for precise application of agricultural aviation.

Identification of an Actual Strain-Induced Effect on Fast Ion Conduction in a Thin-Film Electrolyte.

Strain-induced fast ion conduction has been a research area of interest for nanoscale energy conversion and storage systems. However, because of significant discrepancies in the interpretation of strain effects, there remains a lack of understanding of how fast ionic transport can be achieved by strain effects and how strain can be controlled in a nanoscale system. In this study, we investigated strain effects on the ionic conductivity of Gd0.2Ce0.8O1.9-δ (100) thin films under well controlled experimental conditions, in which errors due to the external environment could not intervene during the conductivity measurement. In order to avoid any interference from perpendicular-to-surface defects, such as grain boundaries, the ionic conductivity was measured in the out-of-plane direction by electrochemical impedance spectroscopy analysis. With varying film thickness, we found that a thicker film has a lower activation energy of ionic conduction. In addition, careful strain analysis using both reciprocal space mapping and strain mapping in transmission electron microscopy shows that a thicker film has a higher tensile strain than a thinner film. Furthermore, the tensile strain of thicker film was mostly developed near a grain boundary, which indicates that intrinsic strain is dominant rather than epitaxial or thermal strain during thin-film deposition and growth via the Volmer-Weber (island) growth mode.

Unveiling the Growth Mechanism of Ordered-Phase within Multimetallic Nanoplates.

Tuning the crystal phase of alloy nanocrystals (NCs) offers an alternative way to improve their electrocatalytic performance, but, how heterometals diffuse and form ordered-phase remains unclear. Herein, for the first time, the mechanism for forming tetrametallic ordered-phase nanoplates (NPLs) is unraveled. The observations reveal that the intermetallic ordered-phase nucleates through crystallinity alteration of the seeds and then propagates by reentrant grooves. Notably, the reentrant grooves act as intermediate NCs for ordered-phase, eventually forming intermetallic PdCuIrCo NPLs. These NPLs substantially outperform for oxygen evolution reaction (221 mV at 10 mA cm-2) and hydrogen evolution reaction (19 mV at 10 mA cm-2) compared to commercial Ir/C and Pd/C catalysts in acidic media. For OER at 1.53 V versus RHE, the PdCuIrCo/C exhibits an enhanced mass activity of 9.8 A mg-1 Pd+Ir (about ten times higher) than Ir/C. For HER at -0. 2 V versus RHE, PdCuIrCo/C shows a remarkable mass activity of 1.06 A mg-1 Pd+Ir, which is three-fold relative to Pd/C. These improvements can be ascribed to the intermetallic ordered-structure with high-valence Ir sites and tensile-strain. This approach enabled the realization of a previously unobserved mechanism for ordered-phase NCs. Therefore, this strategy of making ordered-phase NPLs can be used in diverse heterogeneous catalysis.

Conditional reciprocal stressor-strain effects in university students: a cross-lagged panel study in Germany.

University students worldwide are facing increasing mental health challenges. Traditional stress models, like the Job/Study Demand-Resources Model, link stressors directly to strain. Yet, recent studies suggest the influence of strain on stressors may be even stronger. Our research explored these reciprocal dynamics among university students, considering social support and mindfulness as potential moderators. We conducted a two-wave panel study with 264 university students. We ran separate cross-lagged panel structural equation analyses for three key health outcomes-emotional exhaustion, depression, and well-being-each paired with perceived study stressors, specifically workload and work complexity. Findings revealed significant stressor and strain effects, with social support notably moderating the impact of emotional exhaustion on workload. These insights challenge traditional stress theories and underscore the importance of mental health support and effective stress management strategies for students, emphasizing the need for proactive mental health initiatives in academic environments.