Few-Cycle Surface Plasmon Polaritons.

Surface plasmon polaritons (SPPs) can confine and guide light in nanometer volumes and are ideal tools for achieving electric field enhancement and the construction of nanophotonic circuitry. The realization of the highest field strengths and fastest switching requires confinement also in the temporal domain. Here, we demonstrate a tapered plasmonic waveguide with an optimized grating structure that supports few-cycle surface plasmon polaritons with >70 THz bandwidth while achieving >50% light-field-to-plasmon coupling efficiency. This enables us to observe the─to our knowledge─shortest reported SPP wavepackets. Using time-resolved photoelectron microscopy with suboptical-wavelength spatial and sub-10 fs temporal resolution, we provide full spatiotemporal imaging of co- and counter-propagating few-cycle SPP wavepackets along tapered plasmonic waveguides. By comparing their propagation, we track the evolution of the laser-plasmon phase, which can be controlled via the coupling conditions.

Integrated Manipulation and Addressing of Spin Defect in Diamond.

Scalable and addressable integrated manipulation of qubits is crucial for practical quantum information applications. Different waveguides have been used to transport the optical and electrical driving pulses, which are usually required for qubit manipulation. However, the separated multifields may limit the compactness and efficiency of manipulation and introduce unwanted perturbation. Here, we develop a tapered fiber-nanowire-electrode hybrid structure to realize integrated optical and microwave manipulation of solid-state spins at nanoscale. Visible light and microwave driving pulses are simultaneously transported and concentrated along an Ag nanowire. Studied with spin defects in diamond, the results show that the different driving fields are aligned with high accuracy. The spatially selective spin manipulation is realized. And the frequency-scanning optically detected magnetic resonance (ODMR) of spin qubits is measured, illustrating the potential for portable quantum sensing. Our work provides a new scheme for developing compact, miniaturized quantum sensors and quantum information processing devices.

Large-Area Near-Infrared Emission Enhancement on Single Upconversion Nanoparticles by Metal Nanohole Array.

Single lanthanide (Ln) ion doped upconversion nanoparticles (UCNPs) exhibit great potential for biomolecule sensing and counting. Plasmonic structures can improve the emission efficiency of single UCNPs by modulating the energy transferring process. Yet, achieving robust and large-area single UCNP emission modulation remains a challenge, which obstructs investigation and application of single UCNPs. Here, we present a strategy using metal nanohole arrays (NHAs) to achieve energy-transfer modulation on single UCNPs simultaneously within large-area plasmonic structures. By coupling surface plasmon polaritons (SPPs) with higher-intermediate state (1D2 → 3F3, 1D2 → 3H4) transitions, we achieved a remarkable up to 10-fold enhancement in 800 nm emission, surpassing the conventional approach of coupling SPPs with an intermediate ground state (3H4 → 3H6). We numerically simulate the electrical field distribution and reveal that luminescent enhancement is robust and insensitive to the exact location of particles. It is anticipated that the strategy provides a platform for widely exploring applications in single-particle quantitative biosensing.

Transient Study of Photoluminescence in Nanowaveguides Doped with Quantum Emitters and Metallic Nanoparticles.

We have studied the time-dependent optical properties of nanowaveguides containing an ensemble of noninteracting quantum emitters and interaction metallic nanoparticles. We have developed a theory for transient photoluminescence (PL) and exciton population density using the density matrix method. In our theory, we have included the effect of the dipole-dipole interaction (DDI) between metallic nanoparticles along with the effect of the surface plasmon polaritons (SPPs) created by metallic nanoparticles. We compared our theory with the transient PL experiments of nanohybrids fabricated from CdSe/ZnS quantum dots and an Ag nanorod array. A good agreement between theory and PL experiment is found. We have also examined the transient behavior of the photoluminescence in the presence of the DDI and SPP couplings. It is observed that the number of transient PL oscillations increases as the DDI coupling increases. The width of the transient peaks also increases as the amount of the DDI coupling increases. Finally, we predicted that the peaks of the transient PL oscillation split from one peak to two peaks as the intensity of the DDI coupling reaches the strong coupling limit. The strong coupling limit is defined when the DDI coupling is larger than the PL decay rates. This finding can be used to fabricate nano switches by using one peak as the OFF position and two peaks as the ON position. The above findings also suggest the transient plasmonic properties of nanowaveguides can be controlled by the SPP and DDI couplings. These findings have potential applications in the development of transient nanoscale plasmonic devices such as nano detectors and optical nano switches.

Tunable mid-infrared photodetector based on graphene plasmons controlled by ferroelectric polarization for micro-spectrometer.

Surface plasmonic detectors have the potential to be key components of miniaturized chip-scale spectrometers. Graphene plasmons, which are highly confined and gate-tunable, are suitable forin situlight detection. However, the tuning of graphene plasmonic photodetectors typically relies on the complex and high operating voltage based on traditional dielectric gating technique, which hinders the goal of miniaturized and low-power consumption spectrometers. In this work, we report a tunable mid-infrared (MIR) photodetector by integrating of patterned graphene with non-volatile ferroelectric polarization. The polarized ferroelectric thin film provides an ultra-high surface electric field, allowing the Fermi energy of the graphene to be manipulated to the desired level, thereby exciting the surface plasmon polaritons effect, which is highly dependent on the free carrier density of the material. By exciting intrinsic graphene plasmons, the light transmittance of graphene is greatly enhanced, which improves the photoelectric conversion efficiency of the device. Additionally, the electric field on the surface of graphene enhanced by the graphene plasmons accelerates the carrier transfer efficiency. Therefore, the responsivity of the device is greatly improved. Our simulations show that the detectors have a tunable resonant spectral response of 9-14µm by reconstructing the ferroelectric domain and exhibit a high responsivity to 5.67 × 105A W-1at room temperature. Furthermore, we also demonstrate the conceptual design of photodetector could be used for MIR micro-spectrometer application.

Topological Transitions and Surface Umklapp Scattering in Weakly Modulated Periodic Metasurfaces.

Controlling and manipulating surface waves is highly beneficial for imaging applications, nanophotonic device design, and light-matter interactions. While deep-subwavelength structuring of the metal-dielectric interface can influence surface waves by forming strong effective anisotropy, it disregards important structural degrees of freedom such as the interplay between corrugation periodicity and depth and its effect on the beam transport. Here, we unlock these degrees of freedom, introducing weakly modulated metasurfaces, structured metal-dielectric surfaces beyond effective medium. We utilize groove-structuring with varying depths and periodicities to demonstrate control over the transport of surface waves, dominated by the depth-period interplay. We show unique backward focusing of surface waves driven by an umklapp process-momentum relaxation empowered by the periodic nature of the structure and discover a yet unexplored, dual-stage topological transition. Our findings can be applied to any type of guided wave, introducing a simple and versatile approach for controlling wave propagation in artificial media.

Optical Nanoimaging of Surface Plasmon Polaritons Supported by Ultrathin Metal Films.

The physics of electrons, photons, and their plasmonic interactions change dramatically when one or more dimensions are reduced to atomic-level thicknesses. For example, graphene exhibits unique electrical, plasmonic, and optical properties. Likewise, atomic-thick metal films are expected to exhibit extraordinary quantum optical properties. Several methods of growing ultrathin metal films were demonstrated, but the quality of the obtained films was much worse compared to bulk films. In this work, we propose a new method of making ultrathin gold films that are close in their properties to bulk gold films. Excellent plasmonic properties are revealed by directly observing quasi-short- and quasi-long-range plasmons in such a film via scanning near-field optical microscopy. The results pave the way for the use of ultrathin gold films in flexible and transparent nanophotonics and optoelectronic applications.

Dual-Polarized Multi-Beam Fixed-Frequency Beam Scanning Leaky-Wave Antenna.

A fixed-frequency beam-scanning leaky-wave antenna (LWA) array with three switchable dual-polarized beams is proposed and experimentally demonstrated. The proposed LWA array consists of three groups of spoof surface plasmon polaritons (SPPs) LWAs with different modulation period lengths and a control circuit. Each group of SPPs LWAs can independently control the beam steering at a fixed frequency by loading varactor diodes. The proposed antenna can be configured in both multi-beam mode and single-beam mode, where the multi-beam mode with optional two or three dual-polarized beams. The beam width can be flexibly adjusted from narrow to wide by switching between multi-beam and single-beam states. The prototype of the proposed LWA array is fabricated and measured, and both simulation and experimental results show that the antenna can accomplish a fixed frequency beam scanning at an operating frequency of 3.3 to 3.8 GHz with a maximum scanning range of about 35° in multi-beam mode and about 55° in single-beam mode. It could be a promising candidate for application in the space-air-ground integrated network scenario in satellite communication and future 6G communication systems.

Near-Field Modulation of Differently Oriented Single Photon Emitters with A Plasmonic Probe.

Single photon emitters (SPEs) are critical components of photon-based quantum technology. Recently, the interaction between surface plasmons and emitters has attracted increasing attention because of its potential to improve the quality of single-photon sources through stronger light-matter interactions. In this work, we use a hybrid plasmonic probe composed of a fiber taper and silver nanowire to controllably modulate the radiation properties of SPEs with differently oriented polarization. For out-of-plane oriented SPEs such as single CdSe quantum dots, the radiation lifetime could be reduced by a factor as large as seven; for in-plane oriented SPEs such as hBN defect SPEs, the average modulation amplitude varied from 0.69 to 1.23, depending on the position of the probe. The experimental results were highly consistent with the simulations and theory. This work provides an efficient approach for optimizing the properties of SPEs for quantum photonic integration.

Plasmonic Lithium Niobate Mach-Zehnder Modulators.

Lithium niobate Mach-Zehnder modulators (MZMs) are present in a wide range of technologies and though fulfilling the performance and reliability requirements of present applications, they are becoming progressively too bulky, power inefficient, and slow in switching to keep pace with future technological demands. Here, we utilize plasmonics to demonstrate the most efficient (VπL = 0.23 Vcm) lithium niobate MZM to date, consisting of gold nanostripes on lithium niobate that guide both plasmonic modes and electrical signals that control their relative optical phase delay, thereby enabling efficient electro-optic modulation. For high linearity (modulation depth of >2 dB), the proposed MZM inherently operates near its quadrature point by shifting the relative phase of the signal in the interferometric arms. The demonstrated lithium niobate MZM manifests the benefits of employing plasmonics for applications that demand compact (<1 mm2) and fast (>10 GHz) photonic components operating reliably at ambient temperatures.

Near-Field Radiative Heat Transfer Modulation with an Ultrahigh Dynamic Range through Mode Mismatching.

Modulating near-field radiative heat transfer (NFRHT) with a high dynamic range is challenging in nanoscale thermal science and engineering. Modulation depths [(maximum value - minimum value)/(maximum value + minimum value) × 100%] of ≈2% to ≈15.7% have been reported with matched modes, but breaking the constraint of mode matching theoretically allows for higher modulation depth. We demonstrate a modulation depth of ≈32.2% by a pair of graphene-covered SU8 heterostructures at a gap distance of ≈80 nm. Dissimilar Fermi levels tuned by bias voltages enable mismatched surface plasmon polaritons which improves the modulation. The modulation depth when switching from a matched mode to a mismatched mode is ≈4.4-fold compared to that when switching between matched modes. This work shows the importance of symmetry in polariton-mediated NFRHT and represents the largest modulation depth to date in a two-body system with fixed gap distance and temperature.

Enhanced Near-Field Radiative Heat Transfer between Graphene/hBN Systems.

Near-field radiative heat transfer (NFRHT) can exceed the blackbody radiation limit owing to the coupled evanescent waves, implying a significant potential for energy conversion and thermal management. Coupled surface plasmon polaritons (SPPs) and hyperbolic phonon polaritons (HPPs) with small ohmic losses enable a long propagation wavelength that is essential in NFRHT. However, so far, there still lacks knowledge about the experimental investigation of the coupling of SPPs and HPPs in terms of NFRHT. In this study, the NFRHT between graphene/hexagonal boron nitride (hBN) systems that can be readily transferred onto various substrates, with a gap space of ≈400 nm is measured. NFRHT enhancements in the order of three and six times higher than the blackbody limit for graphene/hBN heterostructures and graphene/hBN/graphene multilayers, respectively are demonstrated. In addition, the largest ever radiative heat flux using graphene/hBN/graphene multilayers under similar gap space of 400 nm is obtained. Consequently, analyzing the photon tunneling modes reveal that these phenomena are consequences of coupled SPPs of graphene and HPPs of hBN.

CMOS-Compatible Electronic-Plasmonic Transducers Based on Plasmonic Tunnel Junctions and Schottky Diodes.

To develop methods to generate, manipulate, and detect plasmonic signals by electrical means with complementary metal-oxide-semiconductor (CMOS)-compatible materials is essential to realize on-chip electronic-plasmonic transduction. Here, electrically driven, CMOS-compatible electronic-plasmonic transducers with Al-AlOX -Cu tunnel junctions as the excitation source of surface plasmon polaritons (SPPs) and Si-Cu Schottky diodes as the detector of SPPs, connected via plasmonic strip waveguides of Cu, are demonstrated. Remarkably, the electronic-plasmonic transducers exhibit overall transduction efficiency of 1.85 ± 0.03%, five times higher than previously reported transducers with two tunnel junctions (metal-insulator-metal (MIM)-MIM transducers) where SPPs are detected based on optical rectification. The result establishes a new platform to convert electronic signals to plasmonic signals via electrical means, paving the way toward CMOS-compatible plasmonic components.

Multilayer Plasmonic Nanostructures for Improved Sensing Activities Using a FEM and Neurocomputing-Based Approach.

In order to obtain optimized elementary devices (photovoltaic modules, power transistors for energy efficiency, high-efficiency sensors) it is necessary to increase the energy conversion efficiency of these devices. A very effective approach to achieving this goal is to increase the absorption of incident radiation. A promising strategy to increase this absorption is to use very thin regions of active material and trap photons near these surfaces. The most effective and cost-effective method of achieving such optical entrapment is the Raman scattering from excited nanoparticles at the plasmonic resonance. The field of plasmonics is the study of the exploitation of appropriate layers of metal nanoparticles to increase the intensity of radiation in the semiconductor by means of near-field effects produced by nanoparticles. In this paper, we focus on the use of metal nanoparticles as plasmonic nanosensors with extremely high sensitivity, even reaching single-molecule detection. The study conducted in this paper was used to optimize the performance of a prototype of a plasmonic photovoltaic cell made at the Institute for Microelectronics and Microsystems IMM of Catania, Italy. This prototype was based on a multilayer structure composed of the following layers: glass, AZO, metal and dielectric. In order to obtain good results, it is necessary to use geometries that orthogonalize the absorption of light, allowing better transport of the photocarriers-and therefore greater efficiency-or the use of less pure materials. For this reason, this study is focused on optimizing the geometries of these multilayer plasmonic structures. More specifically, in this paper, by means of a neurocomputing procedure and an electromagnetic fields analysis performed by the finite elements method (FEM), we established the relationship between the thicknesses of Aluminum-doped Zinc oxide (AZO), metal, dielectric and their main properties, characterizing the plasmonic propagation phenomena as the optimal wavelengths values at the main interfaces AZO/METAL and METAL/DIELECTRIC.

On-Chip Ge Photodetector Efficiency Enhancement by Local Laser-Induced Crystallization.

Metal-semiconductor-metal plasmonic nanostructures enable both on-chip efficient manipulation and ultrafast photodetection of strongly confined modes by enhancing local electrostatic and optical fields. The latter is achieved by making use of nanostructured thin-film germanium (Ge) plasmonic-waveguide photodetectors. While their sizes and locations can be accurately controlled during the nanofabrication, the detector efficiencies are significantly reduced due to deposited Ge amorphous nature. We demonstrate that the efficiency of waveguide-integrated Ge plasmonic photodetectors can be increased significantly (more than 2 orders of magnitude) by spatially controlled laser-induced Ge crystallization. We investigate both free-space and waveguide-integrated Ge photodetectors subjected to 800 nm laser treatment, monitoring the degree of crystallization with Raman spectroscopy, and demonstrate the efficiency enhancement by detecting the telecom radiation. The demonstrated local postprocessing technique can be utilized in various nanophotonic devices for efficient and ultrafast on-chip radiation monitoring and detection, offering significantly improved detector characteristics without jeopardizing the performance of other components.

Transverse and longitudinal coupling of LSPPs in isolated triangular Al-SiO2-Al hybrid nanoplates for generation of local electromagnetic fields with enhanced intensity and increased decay time.

Achieving a large enhancement of local electromagnetic fields in the ultraviolet waveband is desirable for some applications such as surface-enhanced Raman scattering and surface-enhanced fluorescence. In addition, it is more significant for some applications such as plasmon-enhanced harmonic generation to enhance the intensity of local electromagnetic fields and increase their decay time at the same time. In this paper, using the finite-difference time-domain method, we numerically demonstrate that using the linearly polarized light with a wavelength of 325 nm as the illumination light, an isolated triangular Al-SiO2-Al hybrid nanoplate with optimized geometric parameters can produce a local electric field enhanced by a factor of about 108 at one of its top apexes, and produce two local electric fields enhanced by a factor of about 150 at two transverse dielectric/metal interfaces of one of its longitudinal side edges. Moreover, we also numerically demonstrate that the decay time of enhanced local electric fields produced by the isolated triangular Al-SiO2-Al hybrid nanoplate is about 1.6 times as large as that of enhanced local electric fields produced by an isolated triangular Al nanoplate. These unique properties of the isolated triangular Al-SiO2-Al hybrid nanoplate arise because of both the transverse coupling and the longitudinal coupling of localized surface plasmon polaritons in this structure. Our findings make triangular Al-SiO2-Al hybrid nanoplates very promising for application in many fields such as surface-enhanced Raman scattering and plasmon-enhanced harmonic generation.

Ultra-Narrow SPP Generation from Ag Grating.

In this study, we investigate the potential of one-dimensional plasmonic grating structures to serve as a platform for, e.g., sensitive refractive index sensing. This is achieved by comparing numerical simulations to experimental results with respect to the excitation of surface plasmon polaritons (SPPs) in the mid-infrared region. The samples, silver-coated poly-silicon gratings, cover different grating depths in the range of 50 nm-375 nm. This variation of the depth, at a fixed grating geometry, allows the active tuning of the bandwidth of the SPP resonance according to the requirements of particular applications. The experimental setup employs a tunable quantum cascade laser (QCL) and allows the retrieval of angle-resolved experimental wavelength spectra to characterize the wavelength and angle dependence of the SPP resonance of the specular reflectance. The experimental results are in good agreement with the simulations. As a tendency, shallower gratings reveal narrower SPP resonances in reflection. In particular, we report on 2.9 nm full width at half maximum (FWHM) at a wavelength of 4.12 µm and a signal attenuation of 21%. According to a numerical investigation with respect to a change of the refractive index of the dielectric above the grating structure, a spectral shift of 4122nmRIU can be expected, which translates to a figure of merit (FOM) of about 1421 RIU-1. The fabrication of the suggested structures is performed on eight-inch silicon substrates, entirely accomplished within an industrial fabrication environment using standard microfabrication processes. This in turn represents a decisive step towards plasmonic sensor technologies suitable for semiconductor mass-production.

Duplicating Plasmonic Hotspots by Matched Nanoantenna Pairs for Remote Nanogap Enhanced Spectroscopy.

Plasmonic nanoantennas are capable of reversibly interconverting free-space radiation with localized modes at the nanoscale. However, optical access to a single nanoantenna, through a laser beam, is always accompanied by disruptive background perturbations and heating effects. Remote spectroscopy is one promising route to overcome these effects. Here, we demonstrate excitation-collection-separated enhanced spectroscopy using a matched nanoantenna pair. The receiving and transmitting antennas are geometrically separated but bridged by the propagating surface plasmon polaritons (SPPs) on the metal film. The receiving antenna, consisting of a silver nanowire on a mirror, ensures a high light-to-plasmon conversion efficiency. The transmitting antenna consists of a silver nanocube over a mirror and is impedance matched to free space photons and the propagating SPPs. As a proof-of-principle, we demonstrate remote surface-enhanced Raman scattering with a high signal-to-noise ratio. This matched nanoantenna pair may have applications for remote entanglement of quantum emitters, biochemistry detection, or optical interconnects.

Resonant Optical Antennas with Atomic-Sized Tips and Tunable Gaps Achieved by Mechanical Actuation and Electrical Control.

Enhanced electromagnetic fields in nanometer gaps of plasmonic structures increase the optical interaction with matter, including Raman scattering and optical absorption. Quantum electron tunneling across sub-1 nm gaps, however, lowers these effects again. Understanding these phenomena requires controlled variation of gap sizes. Mechanically actuated plasmonic antennas enable repeatable tuning of gap sizes from the weak-coupling over the quantum-electron-tunneling to the direct-electrical-contact regime. Gap sizes are controlled electrically via leads that only weakly disturb plasmonic modes. Conductance signals show a near-continuous transition from electron tunneling to metallic contact. As the antenna's absorption cross-section is reduced, thermal expansion effects are negligible, in contrast to conventional break-junctions. Optical scattering spectra reveal first continuous red shifts for decreasing gap sizes and then blue shifts below gaps of 0.3 nm. The approach provides pathways to study opto- and electromolecular processes at the limit of plasmonic sensing.

A Polarization-Actuated Plasmonic Circulator.

A circulator for surface plasmon polaritons (SPPs) based on a plasmonic two-wire transmission-line (TWTL) structure is experimentally realized. A TWTL offers two distinct plasmon modes that can be independently excited, solely determined by the polarization of the laser field. Through controlled superposition of the two modes, TWTLs are exploited to enable polarization-actuated plasmonic circulators. In the first demonstration, the coupling antennas to the plasmonic circulator are designed to circulate SPPs sensitive to linearly polarized excitation. In the second design, the circulator reacts to the spin angular momenta carried by circularly polarized laser excitations. In both cases, the SPP circulation directions are directly controlled by the laser polarization, and the number of ports is easily expandable. Experimentally, a wide optical operational bandwidth of ∼100 nm is achieved. The results show a major step toward the realization of multifunctioning photonic nanocircuitry.