Derivation of multivariate indices of milk composition, coagulation properties, and curd yield in Manchega dairy sheep.

This study approaches the interrelation patterns between composition of milk and whey, curd yield, chromaticity, syneresis, and technological quality of Manchega sheep milk using multivariate factor analysis. In addition, the effect of the main husbandry components (flock, prolificacy, season of the year, stage of lactation, and parity) on the common latent factors that define the pattern of variation of Manchega milk was assessed. For this purpose, 1,200 individual Manchega ewe milk samples from 4 different flocks registered under the Protected Designation of Origin Queso Manchego were analyzed (50 ewes/flock). Samples were collected in 2 different seasons of the year (spring and autumn) and at 3 time points per season: early, mid-, and late lactation. The obtained results suggested that curd yield mainly depends on milk composition, and the retention of water in the curd is related to coagulation traits. Thus, composition and moisture content could be useful indicators to assess the efficiency and quality of milk intended for cheesemaking, regardless of the analysis of coagulation properties. Finally, in terms of husbandry, a direct effect of flock and stage of lactation was observed on all analyzed factors, with a lower influence of season and parity.

Effects on bread and oil quality after functionalization with microencapsulated chia oil.

BACKGROUND: Omega-3 and omega-6 fatty acids-rich oils suffer oxidation reactions that alter their chemical and organoleptic quality. Microencapsulation can be a powerful tool for protection against ambient conditions. In the present study, the addition of microencapsulated chia oil as an ingredient in bread preparations and its effect on the technological and chemical quality of breads was investigated. RESULTS: Microencapsulation of chia oil was carried out by freeze-drying with soy proteins as wall material and oil release was determined under in vitro gastric and intestinal conditions. Encapsulated oil-containing bread showed no differences in specific volume, average cell area, firmness and chewiness with respect to control bread. Unencapsulated oil-containing bread showed a marked increase in hydroperoxide values respect to control, whereas encapsulated oil-containing bread values were not affected by baking and bread storage. The fatty acid profiles showed a decrease of 13% and 16%, respectively, in α-linolenic acid in the encapsulated and unencapsulated oils with respect to bulk chia oil. Sensory analysis showed no significant differences between bread samples. CONCLUSION: The addition of encapsulated chia oil did not alter the technological quality of breads and prevented the formation of hydroperoxide radicals. A ration of encapsulated oil-containing bread contributes 60% of the recommended dietary intake of omega-3 fatty acids. © 2018 Society of Chemical Industry.

Variations in yield and gluten proteins in durum wheat varieties under late-season foliar versus soil application of nitrogen fertilizer in a northern Mediterranean environment.

BACKGROUND: With the increasing demand for high-quality foodstuffs and concern for environmental sustainability, late-season nitrogen (N) foliar fertilization of common wheat is now an important and widespread practice. This study investigated the effects of late-season foliar versus soil N fertilization on yield and protein content of four varieties of durum wheat, Aureo, Ariosto, Biensur and Liberdur, in a three-year field trial in northern Italy. RESULTS: Variations in low-molecular-weight glutenins (LMW-GS), high-molecular-weight glutenins (HMW-GS) and gliadins were assessed by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). It was found that N applied to the canopy did not improve protein rate compared with N application to the soil (general mean 138 mg g-1 ), but moderately increased productivity in the high-yielding varieties Liberdur and Biensur (three-year means 7.23 vs 7.13 and 7.53 vs 7.09 t ha-1 respectively). Technological quality was mainly related to variety choice, Aureo and Ariosto having higher protein rates and glutenin/gliadin ratios. Also found was a strong 'variety × N application method' interaction in the proportions of protein subunits within each class, particularly LMW-GS and gliadins. A promising result was the higher N uptake efficiency, although as apparent balance, combined with higher HMW/LMW-GS ratio in var. Biensur. CONCLUSION: Late-season foliar N fertilization allows N fertilizer saving, potentially providing environmental benefits in the rainy climate of the northern Mediterranean area, and also leads to variety-dependent up-regulation of essential LMW-GS and gliadins. Variety choice is a key factor in obtaining high technological quality, although it is currently associated with modest grain yield. This study provides evidence of high quality in the specific high-yielding variety Biensur, suggesting its potential as a mono-varietal semolina for pasta production. © 2017 Society of Chemical Industry.

Protein Characteristics that Affect the Quality of Vital Wheat Gluten to be Used in Baking: A Review.

The use of vital wheat gluten in the baking industry and wheat flour mills aims to improve the rheological characteristics of flour considered unsuitable to obtain products such as sliced bread, French bread, high-fiber breads, and other products that require strong flours. To improve characteristics such as flour strength, dough mixing tolerance, and bread volume, vital wheat gluten is added to flour at levels that can vary from 2% to 10% (flour basis), with 5% being a commonly used dosage. However, the vital wheat gluten commercialized in the market has few quality specifications, especially related to the characteristics of the proteins that constitute it and are responsible for the formation of the viscoelastic gluten network. Information on protein quality is important, because variations are observed in the technological quality of vital wheat gluten obtained from different sources, which could be associated to damage caused to proteins during the obtainment process. Several tests, either physical-chemical analyses, or rheological tests, are carried out to establish gluten quality; however, they are sometimes time-consuming and costly. Although these tests give good answers to specify gluten quality, flour mills, and the baking industries require fast and simple tests to evaluate the uses and/or dosage of vital gluten addition to wheat flour. This review covers the concepts, uses, obtainment processes, and quality analysis of vital wheat gluten, as well as simple tests to help identify details about protein quality of commercial vital wheat gluten.

A study on fibre addition to gluten free bread: its effects on bread quality and in vitro digestibility.

The aim of this study was to assess the impact of fibre addition on gluten-free (GF) dough properties and bread technological quality, and on protein and starch in vitro digestibility. Soluble (Inulin, In) and insoluble fibres (oat fibre, OF, and type IV resistant starch, RSIV) were used at 5 and 10% substitution levels. Dough firmness increased when insoluble fibres were added, and decreased when In was used. Incorporation of insoluble fibres resulted into bread with a low specific volume (SBV) since firmer dough were more difficult to expand during proofing and baking. Staling rate was reduced after fibre addition, with the exception being OF 10%, as its lower SBV may have favoured molecule re-association. In general, protein and starch digestibility increased when fibres were added at 5%, and then decreased after further increasing the level. Fibres may have disrupted bread crumb structure, thus increasing digestibility, although the higher addition may have led to a physical and/or chemical impediment to digestion. Inulin has well-known physiological effects, while RS presented the most important effect on in vitro starch digestibility (GI). These results showed the possibility of adding different fibres to GF bread to decrease the GI and increase protein digestibility, while obtaining an overall high quality end-product.

Metabolomic study of fatty livers in ducks: Identification by 1H-NMR of metabolic markers associated with technological quality.

The control of fatty liver fat loss during cooking is a major issue. Previous studies showed that fat loss was influenced by bird production factors and liver technological treatments. However, part of the variability in fat loss remained uncontrolled. To provide enhanced insights into the determinism of fatty liver quality, liver hydrophilic metabolite profiles were measured by nuclear magnetic resonance of the proton ((1)H-NMR). The study aimed at i) comparing fatty livers with extreme fat loss values and ii) at characterizing the effect of postmortem evolution of livers during chilling. A group of 240 male mule ducks (Cairina moschata × Anas platyrhynchos) was reared and overfed. Their livers were sampled at 20 min and 6 h postmortem. Of these birds, 2 groups of ducks were built with extreme values on the technological yield (TY; TY = 100 - % fat loss; the low-fat-loss group, TY = 89.9%, n = 13; and the high-fat-loss group, TY = 68.3%, n = 12, P < 0.001). The (1)H-NMR analyses showed that the high-fat-loss livers were more advanced in postmortem biochemical and structural changes than low-fat-loss livers early postmortem. The high-fat-loss livers were characterized by hydrolysis of glycogen into glucose, worse integrity of cell membrane with diminution of compounds of phospholipids, and higher catabolic processes. The accelerated postmortem processes may be the origin of the differences in fat loss during cooking. During the early postmortem period, the adenosine triphosphate amount in liver cells was strongly reduced and lipolysis of triglycerides seemed to be enhanced. The glycogen stored in liver was first converted into glucose, but contrary to what happens in postmortem muscles, glucose was not converted into lactate.

Effect of amaranth flour (Amaranthus mantegazzianus) on the technological and sensory quality of bread wheat pasta.

The technological and sensory quality of pasta made from bread wheat flour substituted with wholemeal amaranth flour (Amaranthus mantegazzianus) at four levels, 15, 30, 40 and 50% w/w was investigated. The quality of the resulted pasta was compared to that of control pasta made from bread wheat flour. The flours were analyzed for chemical composition and pasting properties. Cooking behavior, color, raw and cooked pasta texture, scanning electron microscopy and sensory evaluation were determined on samples. The pasta obtained from amaranth flour showed some detriment of the technological and sensory quality. So, a maximum substitution level of 30% w/w was defined. This is an equilibrium point between an acceptable pasta quality and the improved nutritional and functional properties from the incorporation of amaranth flour.

Recent advances in germinated cereal and pseudo-cereal starch: Properties and challenges in its modulation on quality of starchy foods.

Germination is an environmentally friendly process with no use of additives, during which only water spraying is done to activate endogenous enzymes for modification. Furthermore, it could induce bioactive phenolics accumulation. Controlling endogenous enzymes' activity is essential to alleviate granular disruption, crystallinity loss, double helices' dissociation, and molecular degradation of cereal and pseudo-cereal starch. Post-treatments (e.g. thermal and high-pressure technology) make it possible for damaged starch to reassemble towards well-packed structure. These contribute to alleviated loss of solubility and pasting viscosity, improved swelling power, or enhanced resistant starch formation. Cereal or pseudo-cereal flour (except that with robust structure) modified by early germination is more applicable to produce products with desirable texture and taste. Besides shortening duration, germination under abiotic stress is promising to mitigate starch damage for better utilization in staple foods.

Exploring Interrelationships between Colour, Composition, and Coagulation Traits of Milk from Cows, Goats, and Sheep.

This study explores the interrelationships between the composition, coagulation, and colour of sheep, goat, and cow milk to identify their similarities and differences and to assess whether the relationships between the variables are common to all species or whether they emerge from species-specific relationships. For this purpose, 2400 individual milk samples were analysed. The differences and similarities between the species were determined using discriminant analysis and cluster analysis. The results show a clear differentiation between species. Sheep milk stands out for its cheesemaking capacity and shows similarities with goat milk in composition and coagulation. Nonetheless, colorimetry highlights a greater similarity between sheep and cow milk. Composition and colorimetry were more discriminating than coagulation, and the variables that differed the most were fat, protein, curd yield, lightness, and red-green balance. Using canonical correlation, the interrelationships between the different sets of variables were explored, revealing patterns of common variation and species-specific relationships. Colorimetric variables were closely related to milk solids in all species, while in sheep milk, an inverse relationship with lactose was also identified. Furthermore, a strong relationship was revealed for all species between colour and curd yield. This could be modelled and applied to estimate the technological value of milk, proving colorimetry as a useful tool for the dairy industry.

Corrigendum: Characterization of Triticum turgidum sspp. durum, turanicum and polonicum grown in Central Italy in relation to technological and nutritional aspects.

[This corrects the article DOI: 10.3389/fpls.2023.1269212.].

Characteristics of Oat and Buckwheat Malt Grains for Use in the Production of Fermented Foods.

Malted gluten-free cereal grains and pseudo-cereals are interesting raw materials for producing fermented foods. The aim of the work was to assess selected technological quality characteristics and antioxidant properties of special malts in terms of use in the production of fermented foods. The research material consisted of malts made from oat, buckwheat, and brewing barley. Malting was performed on a microtechnical scale according to the standard scheme for brewing barley grain. The basic quality parameters of cereal grains obtained malts, and laboratory wort were assessed according to methods applicable in brewing. Atypical brewing malts were characterized by parameters such as malt extractability, protein solubilization, diastatic force, mash filtration time, and wort viscosity. The best results, comparable to barley malt, were obtained for naked oat malt. Malted buckwheat grains turned out to be the least biochemically modified, although their use in the production of beer and/or other fermented beverages is supported by the high content of bioactive substances and antioxidant potential. As the malting process of cereal plants improves their antioxidant properties and increases their nutritional value, oat and buckwheat malts can be successfully used to produce gluten-free fermented beverages or as an addition to fermented products, e.g., in baking and confectionery.

Pork quality traits and associated muscle metabolic changes in pigs under chronic prenatal and postnatal heat stress.

Chronic heat stress (HS) is a major concern affecting pig growth performance and metabolism, with potential consequences on carcass and meat quality traits. The objective of this study was to assess the influence of prenatal (PE) and growing (GE) thermal environments, and their combination, on muscle metabolism, carcass characteristics, and pork quality. From 6 to 109 d of gestation, 12 sows (1 per block) were kept under thermoneutral (TN) conditions (cyclic 18 to 24 °C; PTN) and 12 sows under chronic HS (cyclic 28 to 34 °C; PHS). Two female offspring per sow were selected based on body weight at weaning, for a total of 48 female pigs (12 blocks of 2 sisters from each PE), and one sister was placed in each GE. Gilts were housed from 82 to 140 d of age under cyclic GTN (18 to 24 °C; n = 24) or GHS (28 to 34 °C; n = 24) environments. Data were analyzed using a mixed model including PE, GE, and PE × GE interaction as main effects, and sire, sow within PE, pen within PE × GE, and slaughter day (for plasma, muscle, and meat traits) as random effects. No significant PE × GE interaction was found on any trait under study (P ≥ 0.05). Prenatal HS did not affect growth performance and carcass traits (P ≥ 0.05). Compared with GTN, GHS pigs had lower average daily feed intake, average daily gain, and hot carcass weight (P < 0.01), but similar carcass lean meat content (P ≥ 0.05). Prenatal HS had scarce effects on pork quality, with only higher a* and C* values (P < 0.05) in the Gluteus superficialis. Growing HS led to a higher pH 24 h (P < 0.05) in the Longissimus thoracis et lumborum (LTL) and ham muscles, and higher meat quality index in the ham muscles. In contrast, quality traits of the Semispinalis capitis (SC) were not affected by either PE or GE (P > 0.05). Except a tendency for a higher citrate synthase activity in the SC (P = 0.065), PHS did not affect muscle metabolism. Growing HS induced muscle-specific metabolic responses, with reduced glycolytic potential (P < 0.01) and metabolic enzyme activities (P < 0.05) in the glycolytic LTL, but not in the oxidative SC (P > 0.05). Plasma glucose content at slaughter was lower in the GHS compared with GTN pigs (P = 0.002), indicating an altered energy metabolism in pigs under GHS. Altogether, growing HS altered growth without affecting carcass traits, but improved technological quality of loin and ham. Prenatal HS, alone or combined with GHS, had limited or even no effect on carcass and pork quality.

Pig thermal environment and especially chronic heat stress (HS) can affect animal growth and physiology, with potential impacts on carcass and pork quality. The effects of chronic HS during postnatal growth (GHS) on pork quality are controversial, but the effects of chronic HS during the pig prenatal period (PHS) or of combined PHS and GHS on carcass and meat traits are even less characterized. However, a better understanding of HS consequences on pork quality is of high economic importance for the pork sector, as the frequency and severity of heat waves are likely to increase with global warming. This research focused on the effects of PHS and GHS on pork carcass and meat quality from various muscles and primary cuts (loin, ham), and the underlying muscle biochemical properties. Prenatal HS did not affect growth and carcass traits. Compared with pigs grown in a thermoneutral environment, GHS pigs had reduced gain resulting from lower feed intake and had lighter carcasses, but similar carcass lean meat content. PHS had little effect on pork quality, whereas GHS induced specific metabolic effects in the loin and ham muscles, leading to higher meat pH and water-holding capacity and thereby improved pork technological quality.

Influence of Agronomic Practices on the Antioxidant Compounds of Pigmented Wheat (Triticum aestivum spp. aestivum L.) and Tritordeum (× Tritordeum martinii A. Pujadas, nothosp. nov.) Genotypes.

Twelve pigmented wheat genotypes, one tritordeum, and one common wheat were grown in three field experiments under varying nitrogen (N) fertilization rates to investigate the contributions of genotype, environment, and fertilization on the levels of phenolic acids, anthocyanins, carotenoids and antioxidant capacity of the grains. Soluble phenolic acids increased significantly (+16%) in the environment with high soil N content, while bound phenolic acids and anthocyanins decreased (-16 and -57%). N fertilization affected the agronomic and qualitative traits but had limited effects on some bioactive compounds (bound phenolic acids and anthocyanins). The greatest differences appeared among the color groups and within the same color types, with the black group showing the most anthocyanins and phenolic acids (34.4 and 1207 mg·kg-1) and the highest antioxidant capacity. Some of the cultivars could be promising for the development of innovative supply chains and the production of functional foods, as they showed good yield and quality performances, and good antioxidant features.

The cultivation of rye in marginal Alpine environments: a comparison of the agronomic, technological, health and sanitary traits of local landraces and commercial cultivars.

Rye is a secondary crop that is characterized by a higher tolerance to climatically less favorable conditions than other cereal species. For this reason, rye was historically used as a fundamental raw material for bread production and as a supply of straw in northern parts of Europe as well as in mountain environments, such as Alpine valleys, where locally adapted landraces have continued to be cultivated over the years. In this study, rye landraces collected in different valleys in the Northwest Italian Alps have been selected as the most genetically isolated within their geographical contexts and cultivated in two different marginal Alpine environments. The traits concerning their agronomy, mycotoxin contamination, bioactive content, as well as their technological and baking quality were assessed to characterize and compare rye landraces with commercial wheat and rye cultivars. Rye cultivars showed the same grain yield level as wheat in both environments. Only the genotype selected from the Maira Valley was characterized by tall and thin culms and a proneness to lodging, thereby resulting in a lower yield capacity. Among the rye cultivars, the hybrid one presented the highest yield potential, but also the highest susceptibility to the occurrence of ergot sclerotia. However, the rye cultivars, especially the landraces, were characterized by higher concentrations of minerals, soluble fibers, and soluble phenolic acids, and thus both their flours and breads had superior antioxidant properties. A 40% substitution of refined wheat flour with whole-grain rye flour led to a higher dough water absorption and a lower stability, thereby resulting in lower loaf volumes and darker products. Agronomically and qualitatively speaking, the rye landraces diverged significantly from the conventional rye cultivars, thus reflecting their genetic distinctiveness. The landrace from the Maira Valley shared a high content in phenolic acids and good antioxidant properties with the one from the Susa Valley and, when combined with wheat flour, turned out to be the most suitable for bread making. Overall, the results have highlighted the suitability of reintroducing historic rye supply chains, based on the cultivation of local landraces in marginal environments and the production of value-added bakery goods.

Characterization of Triticum turgidum sspp. durum, turanicum, and polonicum grown in Central Italy in relation to technological and nutritional aspects.

Introduction: Wheat is a staple food, with the two most common species being Triticum aestivum and Triticum turgidum ssp. durum. Moreover, the latter, T. turgidum, includes other tetraploid subspecies, among which the sspp. turanicum (Khorasan wheat) and polonicum (Polish wheat), whose importance has increased in the last decades, representing alternative crops for marginal areas, in addition to being a source of genetic diversity. Methods: In this work, different accessions of these three subspecies of T. turgidum have been grown in 2 years in the same environment and have been characterized for technological properties and factors affecting nutritional quality, such as fiber amount and the content of micro- and macro-nutrients in grains, and for root morphological traits. Results: These analyses allowed the identification, in particular, of a Polish wheat accession showing better technological performances, a higher amount of positive micro- and macro-elements, and a lower amount of toxic cadmium. The modern variety Svevo and the Polish Pol2 showed the lowest and the highest shoot:root ratio, respectively. The high shoot:root ratio in Pol2 was mainly attributable to the decrease in root growth. Although Pol2 had a lower root biomass, its particular root morphology made it more efficient for nutrient uptake, as evident from the greater accumulation of micro- and macro-nutrients. Discussion: These results underline that it is not possible to draw general conclusions about the difference between primitive and modern wheats, but rather a case-by-case approach should be chosen.

Post-Harvest Quality Evaluation of "Soreli" Kiwifruit at Two Ripening °Brix Values from Vineyards of Different Age Under Hail Nets.

The application of anti-hail nets is a practice that has been employed for a long time on different fruit and vegetable cultivations and in different fields of the world. In this work, we checked the effects of shading with white anti-hail nets on the post-harvest quality of "Soreli" kiwifruit collected at two different °Brix (7-8 and 8-9) from vineyards of two different ages (8 and 9 years) and stored at 1 °C for 90 days. It was observed that during the storage, the firmness and color parameters (L*, a*, b*, and Chroma) and the SSC content were generally higher in kiwifruit samples harvested in open field than in those under the nets. Regarding the bioactive compounds, the open field samples showed higher values in total flavonoids content during storage, and the content of carotenoids and chlorophylls in fruits grown in open fields was higher from 30-45 days up to the end of the storage. In contrast, the polyphenols and ascorbic acid values of fruits in open fields and under the nets showed a similar evolution of the values from 45 to 60 days. In general, the early and late harvest time based on the °Brix values and the different ages of the kiwifruit plants under the nets did not affect the quality parameters.

Effect of Heat Treatment by the Sous-Vide Method on the Quality of Poultry Meat.

An increase in the consumption of poultry meat has been observed due to its availability, nutritional value, and delicate flavor. These characteristics make it possible to prepare, with the use of spices and other additives, many different dishes and products for increasingly demanding consumers. The sous-vide technique is increasingly being used to give new sensory attributes to dishes in gastronomy. The study aimed to assess the impact of the heat treatment method, i.e., the sous-vide method, as compared to traditional cooking, on the sensory quality of poultry meat, as well as the efficiency of the process with regard to technological quality. The cooking yield with the sous-vide method of processing poultry meat was higher than with the traditional method of cooking in water (88.5% vs. 71.0%, respectively). The meat was also found to be redder (a* = 254 vs. 074) and less yellow (b* = 1512 vs. 1649), as well as more tender. The sensory quality of chicken breast meat obtained by the sous-vide method was higher in terms of attributes such as color tone, tenderness, juiciness, and overall quality. At the same time, it was lower in terms of the odor of cooked meat and the flavor of cooked meat as compared to meat subjected to traditional cooking.

Meat quality characteristics of pork bellies in relation to fat level.

OBJECTIVE: Pork belly is considered as the most commercially important and preferable primal cut by consumers worldwide. Thus, this study was conducted to determine the effects of fat levels on the meat quality characteristics of pork bellies. METHODS: Seventy-eight growing-finishing pigs collected from different commercial pig farms were slaughtered and used in the present study. After slaughter 24 h, bellies were fabricated according to the Korean Pork Cutting Specification, and immediately sampled for analysis of their fat content. Based on the fat levels, the bellies were segregated into three different groups: low fat (LF, fat ≤20%, n = 15), medium fat (MF, fat 21% to 30%, n = 30), and high fat (HF, fat ≥31%, n = 33). The bellies were then analyzed for meat quality traits, fatty acids, flavor compounds and eating quality properties. RESULTS: The HF group had lower moisture and cooking loss levels compared to the other groups (p<0.05). The LF group presented higher proportions of polyunsaturated fatty acids compared to the other groups (p<0.05). The LF group showed higher amounts of the Maillard reaction-derived flavor compounds (e.g., 2,5-dimethyl pyrazine, 2-ethyl-3,5-dimethyl, and 4-methylthiazole) associated with meaty and roasty flavors whereas, the HF group showed higher amounts of oleic acid- derived compounds (e.g., nonanal and octanal) associated with the fatty and oily flavors. Interestingly, significantly higher scores for all the eating quality attributes (flavor, juiciness, tenderness, and overall acceptance) were found in the HF group compared to those in the LF or MF group (p<0.05). CONCLUSION: The high-fat bellies (fat ≥31%) had a better technological quality and eating quality compared to the low-fat bellies (fat ≤20%). Thus, increasing the fat content may improve the technological quality and eating quality traits of pork bellies, however, this increase may also result in more trimmed loss due to excessively deposited body fat.

Assessment of the Technological Quality of X5CRNI18-10 Steel Parts after Laser and Abrasive Water Jet Cutting Using Synthetic Index of Technological Quality.

Despite extensive knowledge of the cutting methods described, no universal method has been developed so far for evaluating the technological quality of elements shaped by different cutting processes. The aim of the research described in this article was to fill this gap and to propose the author's methodology for the assessment of the technological quality of the surface of X5CRNI18-10 steel shaped as a result of laser cutting and abrasive water jet cutting. A synthetic index of technological quality assessment of the surface after cutting CTQ (cutting technological quality) was proposed. Three groups of factors were taken into account in the assessment of technological quality of the surface after cutting: selected surface texture parameters (arithmetic mean deviation of the surface Sa and total height of the surface St), results of measurements of dimensional accuracy of cut elements (length deviation LD and width deviation WD) as well as indicators of surface morphology estimated on the basis of microscopic images of the surface after cutting (deformation intensity DI and identification of cutting zones ICZ). On the basis of CTQ values determined, the cutting results of both cutting methods were compared. The analyses presented in this paper proved that the CTQ index can be effectively used to compare the results of a cutting process conducted using different methods and under different conditions. The developed CTQ index is a universal valuation tool, allowing for quantitative evaluation of features related to the technological quality of cutting process results.

Data on agronomic traits, biochemical composition of lipids, proteins and polysaccharides and rheological measurement in a brown mustard seed collection.

The data were collected from a brown mustard seeds collection of 18 accessions during two years and in three distinct sites of production in France. The 18 accessions of mustard seeds were selected to be representative of genetic, agronomical and technological variabilities. All accessions were produced in the "Bourgogne" area. This article describes agronomical data (PMG, yield), genotyping data, global composition of mustard seeds (lipids, proteins and polysaccharides) and fine composition of the previous macronutrients potentially involved in the technological properties (fatty acids, storage proteins and osidic composition of polysaccharides). Additional data regarding the potential rheological property of each accessions were also reported. These data can be reused by food industries, breeders and geneticists in order to understand pedoclimatic effects (year and location) and the relation between mustard seed composition and the end-uses properties (paste mustard quality).