A promoter polymorphism defines distinct roles in anther development for Col-0 and Ler-0 alleles of Arabidopsis ACYL-COA BINDING PROTEIN3.

Acyl-CoA-Binding Proteins (ACBPs) bind acyl-CoA esters and function in lipid metabolism. Although acbp3-1, the ACBP3 mutant in Arabidopsis thaliana ecotype Col-0, displays normal floral development, the acbp3-2 mutant from ecotype Ler-0 characterized herein exhibits defective adaxial anther lobes and improper sporocyte formation. To understand these differences and identify the role of ERECTA in ACBP3 function, the acbp3 mutants and acbp3-erecta (er) lines were analyzed by microscopy for anther morphology and high-performance liquid chromatography for lipid composition. Defects in Landsberg anther development were related to the ERECTA-mediated pathway because the progenies of acbp3-2 × La-0 and acbp3-1 × er-1 in Col-0 showed normal anthers, contrasting to that of acbp3-2 in Ler-0. Polymorphism in the regulatory region of ACBP3 enabled its function in anther development in Ler-0 but not Col-0 which harbored an AT-repeat insertion. ACBP3 expression and anther development in acbp3-2 were restored using ACBP3pro (Ler)::ACBP3 not ACBP3pro (Col)::ACBP3. SPOROCYTELESS (SPL), a sporocyte formation regulator activated ACBP3 transcription in Ler-0 but not Col-0. For anther development, the ERECTA-related role of ACBP3 is required in Ler-0, but not Col-0. The disrupted promoter regulatory region for SPL binding in Col-0 eliminates the role of ACBP3 in anther development.

Photochemical Synthesis of Thioesters from Aryl Halides and Carboxylic Acids.

Thioesters are important in synthesis, materials science, and biology, and their preparation traditionally relies on the use of disagreeable thiols. Here, we report a thiol-free protocol that stitches together widespread carboxylic acids and aryl halides, producing a diverse array of thioesters. Crucial to this strategy is the discovery that tetramethylthiourea can serve as both a sulfur source and, upon direct excitation by purple light, as a strong reductant, suitable for activating aryl halides via single-electron transfer. Coupling of the resulting aryl radicals provides an isothiouronium ion intermediate, which can be attacked by carboxylic acids via a polar pathway, affording the thioester products under mild conditions.

Rapid Biocatalytic Synthesis of Aromatic Acid CoA Thioesters by Using Microbial Aromatic Acid CoA Ligases.

Chemically labile ester linkages can be introduced into lignin by incorporation of monolignol conjugates, which are synthesized in planta by acyltransferases that use a coenzyme A (CoA) thioester donor and a nucleophilic monolignol alcohol acceptor. The presence of these esters facilitates processing and aids in the valorization of renewable biomass feedstocks. However, the effectiveness of this strategy is potentially limited by the low steady-state levels of aromatic acid thioester donors in plants. As part of an effort to overcome this, aromatic acid CoA ligases involved in microbial aromatic degradation were identified and screened against a broad panel of substituted cinnamic and benzoic acids involved in plant lignification. Functional fingerprinting of this ligase library identified four robust, highly active enzymes capable of facile, rapid, and high-yield synthesis of aromatic acid CoA thioesters under mild aqueous reaction conditions mimicking in planta activity.

4D Printing of Extrudable and Degradable Poly(Ethylene Glycol) Microgel Scaffolds for Multidimensional Cell Culture.

Granular synthetic hydrogels are useful bioinks for their compatibility with a variety of chemistries, affording printable, stimuli-responsive scaffolds with programmable structure and function. Additive manufacturing of microscale hydrogels, or microgels, allows for the fabrication of large cellularized constructs with percolating interstitial space, providing a platform for tissue engineering at length scales that are inaccessible by bulk encapsulation where transport of media and other biological factors are limited by scaffold density. Herein, synthetic microgels with varying degrees of degradability are prepared with diameters on the order of hundreds of microns by submerged electrospray and UV photopolymerization. Porous microgel scaffolds are assembled by particle jamming and extrusion printing, and semi-orthogonal chemical cues are utilized to tune the void fraction in printed scaffolds in a logic-gated manner. Scaffolds with different void fractions are easily cellularized post printing and microgels can be directly annealed into cell-laden structures. Finally, high-throughput direct encapsulation of cells within printable microgels is demonstrated, enabling large-scale 3D culture in a macroporous biomaterial. This approach provides unprecedented spatiotemporal control over the properties of printed microporous annealed particle scaffolds for 2.5D and 3D tissue culture.

Iron-Catalyzed Cross-Coupling of Thioesters and Organomanganese Reagents.

We report a Fukuyama-type coupling of thioesters with aliphatic organomanganese reagents utilizing a cheap and easily available iron(III) precatalyst. The reactions exhibit a wide tolerance of solvents and functional groups, allowing for the conversion of thioesters derived from natural products and pharmaceutical compounds. A strong steric impact from each reaction component (carboxylic moiety, thiol substituent and manganese reagent) was displayed, which enabled regioselective transformation of dithioesters. Mechanistic investigations showed that the released thiolate does not act as a mere spectator ligand, but rather positively influences the stability of intermediate alkyl(II)ferrates.

Carboxylate Catalyzed Isomerization of ß,γ-Unsaturated N-Acetylcysteamine Thioesters.

We demonstrate herein the capacity of simple carboxylate salts - tetrametylammonium and tetramethylguanidinium pivalate - to act as catalysts in the isomerization of ß,γ-unsaturated thioesters to α,ß-unsaturated thioesters. The carboxylate catalysts gave reaction rates comparable to those obtained with DBU, but with fewer side reactions. The reaction exhibits a normal secondary kinetic isotope effect (k1H /k1D =1.065±0.026) with a ß,γ-deuterated substrate. Computational analysis of the mechanism provides a similar value (k1H /k1D =1.05) with a mechanism where γ-reprotonation of the enolate intermediate is rate determining.

Fukuyama reduction, Fukuyama coupling and Fukuyama-Mitsunobu alkylation: recent developments and synthetic applications.

Fukuyama reaction for the synthesis of multifunctional aldehydes, secondary amines and ketones has gained considerable importance in synthetic organic chemistry because of mild reaction conditions. The use of thioesters in both Fukuyama aldehydes and ketones synthesis is highly attractive for organic chemists as they are easily accessible from corresponding carboxylic acids. Fukuyama-Mitsunobu reaction utilizes 2-nitrobenzenesulfonyl (Ns) for the protection/activation/deprotection of primary amines to afford secondary amines in good yields and high enantioselectivities. This review presents recent synthetic developments and applications of Fukuyama reaction for the synthesis of aldehydes, secondary amines and ketones.

Thioester-Assisted Sortase-A-Mediated Ligation.

Sortase A (SrtA)-mediated ligation, a popular method for protein labeling and semi-synthesis, is limited by its reversibility and dependence on the LPxTG motif, where "x" is any amino acid. Here, we report that SrtA can mediate the efficient and irreversible ligation of a protein/peptide containing a C-terminal thioester with another protein/peptide bearing an N-terminal Gly, with broad tolerance for a wide variety of LPxT-derived sequences. This strategy, the thioester-assisted SrtA-mediated ligation, enabled the expedient preparation of proteins bearing various N- or C-terminal labels, including post-translationally modified proteins such as the Ser139-phosphorylated histone H2AX and Lys9-methylated histone H3, with less dependence on the LPxTG motif. Our study validates the chemical modification of substrates as an effective means of augmenting the synthetic capability of existing enzymatic methods.

Chemoselective N-acylation of indoles using thioesters as acyl source.

The selective acylation of indoles often requires sensitive and reactive acyl chloride derivatives. Here, we report a mild, efficient, functional group tolerant, and highly chemoselective N-acylation of indoles using thioesters as a stable acyl source. A series of indoleamides have been obtained with moderate to good yields. In addition, heterocycles, such as carbazole, can also be used as nucleophiles in this reaction.

Comparison of crystal structure and DFT calculations of triferrocenyl trithiophosphite's conformance.

A triferrocenyl trithiophosphite was studied by X-ray single-crystal diffraction. Triferrocenyl trithiophosphite has nine axes of internal rotation: three P-S bonds, three C-S bonds and three Fe-cyclopentadienyl axes. Rotation around the P-S bonds results in a totally asymmetric structure with three ferrocenylthio groups exhibiting different orientations towards the phosphorus lone electron pair (LEP). A comparison of DFT calculations and X-ray diffraction data is presented, herein we show which conformations are preferred for a given ligand.

A Nickel(II)-Mediated Thiocarbonylation Strategy for Carbon Isotope Labeling of Aliphatic Carboxamides.

A series of pharmaceutically relevant small molecules and biopharmaceuticals bearing aliphatic carboxamides have been successfully labeled with carbon-13. Key to the success of this novel carbon isotope labeling technique is the observation that 13 C-labeled NiII -acyl complexes, formed from a 13 CO insertion step with NiII -alkyl intermediates, rapidly react in less than one minute with 2,2'-dipyridyl disulfide to quantitatively form the corresponding 2-pyridyl thioesters. Either the use of 13 C-SilaCOgen or 13 C-COgen allows for the stoichiometric addition of isotopically labeled carbon monoxide. Subsequent one-pot acylation of a series of structurally diverse amines provides the desired 13 C-labeled carboxamides in good yields. A single electron transfer pathway is proposed between the NiII -acyl complexes and the disulfide providing a reactive NiIII -acyl sulfide intermediate, which rapidly undergoes reductive elimination to the desired thioester. By further optimization of the reaction parameters, reaction times down to only 11 min were identified, opening up the possibility of exploring this chemistry for carbon-11 isotope labeling. Finally, this isotope labeling strategy could be adapted to the synthesis of 13 C-labeled liraglutide and insulin degludec, representing two antidiabetic drugs.

Synthesis of Spirocycles via Ni-Catalyzed Intramolecular Coupling of Thioesters and Olefins.

A nickel-catalyzed intramolecular coupling of thioesters and olefins has been developed for the efficient synthesis of spirocycles, a privileged scaffold commonly found in natural products. This transformation is characterized by the simultaneous transfer of both acyl and thiol moieties to the alkene, with the suppression of decarbonylation and ß-hydrogen elimination. Initial mechanistic investigations are consistent with an oxidative addition/olefin insertion/reductive elimination mechanism. The incorporated methylene sulfide substituent can undergo a variety of further reactions to increase molecular diversity and complexity. These results demonstrate that thioester derivatives can be used as powerful building blocks for the assembly of complex scaffolds.

Suspect screening and targeted analysis of acyl coenzyme A thioesters in bacterial cultures using a high-resolution tribrid mass spectrometer.

Analysis of acyl coenzyme A thioesters (acyl-CoAs) is crucial in the investigation of a wide range of biochemical reactions and paves the way to fully understand the concerned metabolic pathways and their superimposed networks. We developed two methods for suspect screening of acyl-CoAs in bacterial cultures using a high-resolution Orbitrap Fusion tribrid mass spectrometer. The methods rely on specific fragmentation patterns of the target compounds, which originate from the coenzyme A moiety. They make use of the formation of the adenosine 3',5'-diphosphate key fragment (m/z 428.0365) and the neutral loss of the adenosine 3'-phosphate-5'-diphosphate moiety (506.9952) as preselection criteria for the detection of acyl-CoAs. These characteristic ions are generated either by an optimised in-source fragmentation in a full scan Orbitrap measurement or by optimised HCD fragmentation. Additionally, five different filters are included in the design of method. Finally, data-dependent MS/MS experiments on specifically preselected precursor ions are performed. The utility of the methods is demonstrated by analysing cultures of the denitrifying betaproteobacterium "Aromatoleum" sp. strain HxN1 anaerobically grown with hexanoate. We detected 35 acyl-CoAs in total and identified 24 of them by comparison with reference standards, including all 9 acyl-CoA intermediates expected to occur in the degradation pathway of hexanoate. The identification of additional acyl-CoAs provides insight into further metabolic processes occurring in this bacterium. The sensitivity of the method described allows detecting acyl-CoAs present in biological samples in highly variable abundances. Graphical abstract.

Electrochemical Properties and Structure of Multi-Ferrocenyl Phosphorus Thioesters.

The reaction of triferrocenylthiophosphite with elemental sulfur leads to triferrocenyltetrathiophosphate. The molecule of tetrathiophosphate adopts propeller-like all synclinal-conformation of the ferrocenyl fragments respective to the P=S bond. All ferrocenyl groups have nearly ideal eclipsed conformation of the cyclopentadienyl fragments. The Fc3S3P (1), Fc3S3P=O, (2) and Fc3S3P=S (3) demonstrate three reversible and well-separated ferrocenyl-based redox events. The electronic structures of 1-3 have been studied quantum-chemically; the energies and composition of frontier orbitals have been calculated.

Organocatalytic Transformation of Aldehydes to Thioesters with Visible Light.

A metal- and oxidant-free catalytic method for accessing structurally diverse thioesters from readily accessible, widespread aldehydes, is described. A strategy of a simple organic 9,10-phenanthrenequinone-promoted hydrogen atom transfer (HAT) with visible light was successfully implemented to selectively generate acyl radicals without inducing crossover reactivity of thioester products. The preparative power of the method was demonstrated by broad substrate scope and wide functional group tolerance, and enabled the late-stage modification of complex structures, which are difficult to achieve with the existing protocols.

Metal-Catalyzed Synthesis and Use of Thioesters: Recent Developments.

While thioesters are common intermediates in biochemical processes, they are much less appreciated in organic synthesis, also compared to other carboxylic acid derivatives. However, their chemistry and reactivity is intriguing and diversified, reaching much further than the acyl substitution and aldol chemistry. Herein, we focus on metal-catalyzed reactions for the synthesis of thioesters as well as their transformations. Reactions such as thiocarbonylation, cross-coupling, decarbonylation, allylic substitution or dual photoredox/metal catalysis are discussed. On one hand, new atom economic methods allow for convenient synthesis of thioesters from well available starting materials. On the other hand, various synthetically important compounds can by synthesized due to the multifaceted reactivity of thioesters that we aimed to depict.

Nickel-Catalyzed C-S Bond Formation via Decarbonylative Thioetherification of Esters, Amides and Intramolecular Recombination Fragment Coupling of Thioesters.

A nickel catalyzed cross-coupling protocol for the straightforward C-S bond formation has been developed. Various mercaptans and a wide range of ester and amide substrates bearing various substituents were tolerated in this process which afforded products in good to excellent yields. Furthermore, an intramolecular protocol for the synthesis of thioethers starting from thioesters has been developed. The utility of this protocol has been demonstrated in a new synthetic protocol of benzothiophene.

Synthesis, antitumour activities and molecular docking of thiocarboxylic acid ester-based NSAID scaffolds: COX-2 inhibition and mechanistic studies.

A new series of NSAID thioesters were synthesized and evaluated for their in vitro antitumor effects against a panel of four human tumor cell lines, namely: HepG2, MCF-7, HCT-116 and Caco-2, using the MTT assay. Compared to the reference drugs 5-FU, afatinib and celecoxib, compounds 2b, 3b, 6a, 7a, 7b and 8a showed potent broad-spectrum antitumor activity against the selected tumour cell lines. Accordingly, these compounds were selected for mechanistic studies about COX inhibition and kinase assays. In vitro COX-1/COX-2 enzyme inhibition assay results indicated that compounds 2b, 3b, 6a, 7a, 7b, 8a and 8 b selectively inhibited the COX-2 enzyme (IC50 = ∼0.20-0.69 µM), with SI values of (>72.5-250) compared with celecoxib (IC50 = 0.16 µM, COX-2 SI: > 312.5); however, all the tested compounds did not inhibit the COX-1 enzyme (IC50 > 50 µM). On the other hand, EGFR, HER2, HER4 and cSrc kinase inhibition assays were evaluated at a 10 µM concentration. The selected candidates displayed limited activities against the various tested kinases; the compounds 2a, 3b, 6a, 7a, 7b and 8a showed no activity to weak activity (% inhibition = ∼0-10%). The molecular docking study revealed the importance of the thioester moiety for the interaction of the drugs with the amino acids in the active sites of COX-2. The aforementioned results indicated that thioester based on NSAID scaffolds derivatives may serve as new antitumor compounds.

Palladium-Catalyzed Insertion of Isocyanides into the C-S Bonds of Heteroaryl Sulfides.

Insertion of tert-butyl isocyanide into the C(sp2 )-S bonds of heteroaryl sulfides is catalyzed by a palladium diphosphine complex. Thioimidates generated through this reaction could be readily hydrolyzed under acidic conditions to yield the corresponding thioesters, which are of synthetic use. This insertion is useful because starting heteroaryl sulfides were readily prepared by either conventional ways or through sulfur-specific extended Pummerer reactions.

Mitochondrial fatty acid synthesis, fatty acids and mitochondrial physiology.

Mitochondria and fatty acids are tightly connected to a multiplicity of cellular processes that go far beyond mitochondrial fatty acid metabolism. In line with this view, there is hardly any common metabolic disorder that is not associated with disturbed mitochondrial lipid handling. Among other aspects of mitochondrial lipid metabolism, apparently all eukaryotes are capable of carrying out de novo fatty acid synthesis (FAS) in this cellular compartment in an acyl carrier protein (ACP)-dependent manner. The dual localization of FAS in eukaryotic cells raises the questions why eukaryotes have maintained the FAS in mitochondria in addition to the "classic" cytoplasmic FAS and what the products are that cannot be substituted by delivery of fatty acids of extramitochondrial origin. The current evidence indicates that mitochondrial FAS is essential for cellular respiration and mitochondrial biogenesis. Although both ß-oxidation and FAS utilize thioester chemistry, CoA acts as acyl-group carrier in the breakdown pathway whereas ACP assumes this role in the synthetic direction. This arrangement metabolically separates these two pathways running towards opposite directions and prevents futile cycling. A role of this pathway in mitochondrial metabolic sensing has recently been proposed. This article is part of a Special Issue entitled: Lipids of Mitochondria edited by Guenther Daum.