RESUMO
Hot carrier-based energy conversion systems could double the efficiency of conventional solar energy technology or drive photochemical reactions that would not be possible using fully thermalized, "cool" carriers, but current strategies require expensive multijunction architectures. Using an unprecedented combination of photoelectrochemical and in situ transient absorption spectroscopy measurements, we demonstrate ultrafast (<50 fs) hot exciton and free carrier extraction under applied bias in a proof-of-concept photoelectrochemical solar cell made from earth-abundant and potentially inexpensive monolayer (ML) MoS2. Our approach facilitates ultrathin 7 Å charge transport distances over 1 cm2 areas by intimately coupling ML-MoS2 to an electron-selective solid contact and a hole-selective electrolyte contact. Our theoretical investigations of the spatial distribution of exciton states suggest greater electronic coupling between hot exciton states located on peripheral S atoms and neighboring contacts likely facilitates ultrafast charge transfer. Our work delineates future two-dimensional (2D) semiconductor design strategies for practical implementation in ultrathin photovoltaic and solar fuel applications.
RESUMO
As opposed to natural photosynthesis, a significant challenge in a semiconductor-based photocatalyst is the limited hole extraction efficiency, which adversely affects solar-to-fuel efficiency. Recent studies have demonstrated that photocatalysts featuring spatially isolated dual catalytic oxidation/reduction sites can yield enhanced hole extraction efficiencies. However, the decay dynamics of excited states in such photocatalysts have not been explored. Here a ternary barbell-shaped CdS/MoS2/Cu2S heterostructure is prepared, comprising CdS nanorods (NRs) interfaced with MoS2 nanosheets at both ends and Cu2S nanoparticles on the sidewall. By using transient absorption (TA) spectra, highly efficient charge separation within the CdS/MoS2/Cu2S heterostructure are identified. This is achieved through directed electron transfer to the MoS2 tips at a rate constant of >8.3 × 109 s-1 and rapid hole transfer to the Cu2S nanoparticles on the sidewall at a rate of >6.1 × 1010 s-1, leading to an exceptional overall charge transfer constant of 2.3 × 1011 s-1 in CdS/MoS2/Cu2S. The enhanced hole transfer efficiency results in a remarkably prolonged charge-separated state, facilitating efficient electron accumulation within the MoS2 tips. Consequently, the ternary CdS/MoS2/Cu2S heterostructure demonstrates a 22-fold enhancement in visible-light-driven H2 generation compare to pure CdS nanorods. This work highlights the significance of efficient hole extraction in enhancing the solar-to-H2 performance of semiconductor-based heterostructure.
RESUMO
Photosynthesis of H2O2 from earth-abundant O2 and H2O molecules offers an eco-friendly route for solar-to-chemical conversion. The persistent challenge is to tune the photo-/thermo- dynamics of a photocatalyst toward efficient electron-hole separation while maintaining an effective driving force for charge transfer. Such a case is achieved here by way of a synergetic strategy of sub-band-assisted Z-Scheme for effective H2O2 photosynthesis via direct O2 reduction and H2O oxidation without a sacrificial agent. The optimized SnS2/g-C3N4 heterojunction shows a high reactivity of 623.0 µmol g-1 h-1 for H2O2 production under visible-light irradiation (λ > 400 nm) in pure water, ≈6 times higher than pristine g-C3N4 (100.5 µmol g-1 h-1). Photodynamic characterizations and theoretical calculations reveal that the enhanced photoactivity is due to a markedly promoted lifetime of trapped active electrons (204.9 ps in the sub-band and >2.0 ns in a shallow band) and highly improved O2 activation, as a result of the formation of a suitable sub-band and catalytic sites along with a low Gibbs-free energy for charge transfer. Moreover, the Z-Scheme heterojunction creates and sustains a large driving force for O2 and H2O conversion to high value-added H2O2.
RESUMO
Converting solar energy into hydrogen energy using conjugated polymers (CP) is a promising solution to the energy crisis. Improving water solubility plays one of the critical factors in enhancing the hydrogen evolution rate (HER) of CP photocatalysts. In this study, a novel concept of incorporating hydrophilic side chains to connect the backbones of CPs to improve their HER is proposed. This concept is realized through the polymerization of carbazole units bridged with octane, ethylene glycol, and penta-(ethylene glycol) to form three new side-chain-braided (SCB) CPs: PCz2S-OCt, PCz2S-EG, and PCz2S-PEG. Verified through transient absorption spectra, the enhanced capability of PCz2S-PEG for ultrafast electron transfer and reduced recombination effects has been demonstrated. Small- and wide-angle X-ray scattering (SAXS/WAXS) analyses reveal that these three SCB-CPs form cross-linking networks with different mass fractal dimensions (f) in aqueous solution. With the lowest f value of 2.64 and improved water/polymer interfaces, PCz2S-PEG demonstrates the best HER, reaching up to 126.9 µmol h-1 in pure water-based photocatalytic solution. Moreover, PCz2S-PEG exhibits comparable performance in seawater-based photocatalytic solution under natural sunlight. In situ SAXS analysis further reveals nucleation-dominated generation of hydrogen nanoclusters with a size of ≈1.5 nm in the HER of PCz2S-PEG under light illumination.
RESUMO
The study focuses on the structural and photophysical characteristics of neutral and oxidized forms of N-tolanyl-phenochalcogenazines PZX-tolan with X=O, S, Se, and Te. X-ray crystal structure analyses show a pseudo-equatorial (pe) structure of the tolan substituent in the O, S, and Se dyads, while the Te dyad possesses a pseudo-axial (pa) structure. DFT calculations suggest the pe structure for O and S, and the pa structure for Se and Te as stable forms. Steady-state and femtosecond-time resolved optical spectroscopy in toluene solution indicate that the O and S dyads emit from a CT state, whereas the Se and Te dyads emit from a tolan-localized state. The T1 state is tolan-localized in all cases, showing phosphorescence at 77â K. The heavy atom effect of chalcogens induces intersystem crossing from S1 to Tx, resulting in a decreasing S1 lifetime from 2.1â ns to 0.42â ps. The T1 states possess potential for singlet oxygen sensitization with a high quantum yield (ca. 40 %) for the O, S, and Se dyads. Radical cations exhibit spin density primarily localized at the heterocycle. EPR measurements and quasirelativistic DFT calculations reveal a very strong g-tensor anisotropy, supporting the pe structure for the S and Se derivatives.
RESUMO
Since its first synthesis by Clar in 1948, terrylene - a fully connected ternaphthalene oligomer via naphthalene's peri-positions - has gained special focus within the rylene family, drawing interest for its unique chemical, structural, optoelectronic and single photon emission properties. In this study, we introduce a novel synthetic pathway that enhances the solubility of terrylene derivatives through complete peri-alkylation, while also facilitating extensions at the bay-positions. This approach not only broadens the scope of terrylene's chemical versatility but also opens new avenues for developing solution processable novel multi-edge nanographenes and tailoring electronic energy levels through topological edge structures. Our findings include a comprehensive structural and spectroscopic characterization along with transient absorption spectroscopy and photophysics of both the synthesized peri-alkylated terrylene and its phenylene-fused derivative.
RESUMO
Colloidal two-dimensional (2D) nanoplatelets (NPLs) have been extensively studied owing to promising potential in optoelectronic applications. Here, we have reported the preparation of 2D CdSeTe alloy NPLs and investigated their energy and charge transfer with porphyrin molecules. The red shifting in the optical properties suggests the change in the band gaps. Furthermore, the energy and the charge transfer are evident in the composite of CdSeTe alloy NPLs with 5,10,15,20-tetra(4pyridyl)-porphyrin (TpyP) molecules. The quenching in the photoluminescence (PL) spectra and PL decay time supports the energy transfer (~61 % efficiency) and the charge transfer. The thermodynamically feasible hole transfer is evidenced by the band alignment of the alloy NPLs and TpyP molecules, which is further supported by a transient absorption spectroscopy (TAS) study. The TA study found the hole transfer within ~3â ps time scale, proving the effective charge carrier separation for better optoelectronic applications.
RESUMO
Singlet fission (SF) is a spin-allowed process in which a higher-energy singlet exciton is converted into two lower-energy triplet excitons via a triplet pair intermediate state. Implementing SF in photovoltaic devices holds the potential to exceed the Shockley-Queisser limit of conventional single-junction solar cells. Although great progress has been made in exploiting the underlying mechanism of SF over the past decades, the scope of materials capable of SF, particularly polymeric materials, remains poor. SF-capable polymer is one of the most potential candidates in the implementation of SF into devices due to their distinct superiorities in flexibility, solution processability and self-assembly behavior. Notably, recent advancements have demonstrated high-performance SF in isolated donor-acceptor (D-A) copolymer chains. This review provides an overview of recent progress in the development of SF-capable polymeric materials, with a significant focus on elucidating the mechanisms of SF in polymers and optimizing the design strategies for SF-capable polymers. Additionally, the paper discusses the challenges encountered in this field and presents future perspectives. It is expected that this comprehensive review will offer valuable insights into the design of novel SF-capable polymeric materials, further advancing the potential for SF implementation in photovoltaic devices.
Assuntos
PolímerosRESUMO
Photosynthetic reaction centers (RCs) from Rhodobacter sphaeroides were engineered to vary the electronic properties of a key tyrosine (M210) close to an essential electron transfer component via its replacement with site-specific, genetically encoded noncanonical amino acid tyrosine analogs. High fidelity of noncanonical amino acid incorporation was verified with mass spectrometry and X-ray crystallography and demonstrated that RC variants exhibit no significant structural alterations relative to wild type (WT). Ultrafast transient absorption spectroscopy indicates the excited primary electron donor, P*, decays via a â¼4-ps and a â¼20-ps population to produce the charge-separated state P+HA- in all variants. Global analysis indicates that in the â¼4-ps population, P+HA- forms through a two-step process, P*â P+BA-â P+HA-, while in the â¼20-ps population, it forms via a one-step P* â P+HA- superexchange mechanism. The percentage of the P* population that decays via the superexchange route varies from â¼25 to â¼45% among variants, while in WT, this percentage is â¼15%. Increases in the P* population that decays via superexchange correlate with increases in the free energy of the P+BA- intermediate caused by a given M210 tyrosine analog. This was experimentally estimated through resonance Stark spectroscopy, redox titrations, and near-infrared absorption measurements. As the most energetically perturbative variant, 3-nitrotyrosine at M210 creates an â¼110-meV increase in the free energy of P+BA- along with a dramatic diminution of the 1,030-nm transient absorption band indicative of P+BA- formation. Collectively, this work indicates the tyrosine at M210 tunes the mechanism of primary electron transfer in the RC.
Assuntos
Proteínas de Bactérias/metabolismo , Variação Genética , Complexo de Proteínas do Centro de Reação Fotossintética/genética , Rhodobacter sphaeroides/genética , Rhodobacter sphaeroides/fisiologia , Sequência de Aminoácidos , Proteínas de Bactérias/genética , Transporte de Elétrons , Regulação Bacteriana da Expressão Gênica/fisiologia , Conformação ProteicaRESUMO
The application of CdSe nanoplatelets (NPLs) in the ultraviolet/blue region remains an open challenge due to charge trapping typically leading to limited photoluminescence quantum efficiency (PL QE) and sub-bandgap emission in core-only NPLs. Here, we synthesized 3.5 monolayer core/crown CdSe/CdS NPLs with various crown dimensions, exhibiting saturated blue emission and PL QE up to 55%. Compared to core-only NPLs, the PL intensity decays monoexponentially over two decades due to suppressed deep trapping and delayed emission. In both core-only and core/crown NPLs we observe biexciton-mediated optical gain between 470 and 510 nm, with material gain coefficients up to 7900 cm-1 and consistently lower gain thresholds in crowned NPLs. Gain lifetimes are limited to 40 ps, due to residual ultrafast trapping and higher exciton densities at threshold. Our results provide guidelines for rational optimization of thin CdSe NPLs toward lighting and light-amplification applications.
RESUMO
Dynamics of optically excited plasmonic nanoparticles are presently understood as a series of scattering events involving the initiation of nanoparticle breathing oscillations. According to established models, these are caused by statistical heat transfer from thermalized electrons to the lattice. An additional contribution by hot-electron pressure accounts for phase mismatches between theory and experimental observations. However, direct experimental studies resolving the breathing-oscillation excitation are still missing. We used optical transient-absorption spectroscopy and time-resolved single-particle X-ray diffractive imaging to access the electron system and lattice. The time-resolved single-particle imaging data provided structural information directly on the onset of the breathing oscillation and confirmed the need for an additional excitation mechanism for thermal expansion. We developed a new model that reproduces all of our experimental observations. We identified optically induced electron density gradients as the initial driving source.
RESUMO
Triggered by the expanding demands of semiconductor devices, strain engineering of two-dimensional transition metal dichalcogenides (TMDs) has garnered considerable research interest. Through steady-state measurements, strain has been proved in terms of its modulation of electronic energy bands and optoelectronic properties in TMDs. However, the influence of strain on the spin-orbit coupling as well as its related valley excitonic dynamics remains elusive. Here, we demonstrate the effect of strain on the excitonic dynamics of monolayer WS2 via steady-state fluorescence and transient absorption spectroscopy. Combined with theoretical calculations, we found that tensile strain can reduce the spin-splitting value of the conduction band and lead to transitions between different exciton states via spin-flip mechanism. Our findings suggest that the spin-flip process is strain-dependent, provides a reference for application of valleytronic devices, where tensile strain is usually existing during their design and fabrication.
RESUMO
The syntheses of atomically precise silver (Ag) clusters stabilized by multidentate lacunary polyoxometalate (POM) ligands have been emerging as a promising but challenging research direction, the combination of redox-active POM ligands and silver clusters will render them unexpected geometric structures and catalytic properties. Herein, we report the successful construction of two structurally-new lacunary POM-stabilized Ag clusters, TBA6 H14 Ag14 (DPPB)4 (CH3 CN)9 [Ag24 (Si2 W18 O66 )3 ] â 10CH3 CN â 9H2 O ({Ag24 (Si2 W18 O66 )3 }, TBA=tetra-n-butylammonium, DPPB=1,4-Bis(diphenylphosphino)butane) and TBA14 H6 Ag9 Na2 (H2 O)9 [Ag27 (Si2 W18 O66 )3 ] â 8CH3 CN â 10H2 O ({Ag27 (Si2 W18 O66 )3 }), using a facile one-pot solvothermal approach. Under otherwise identical synthetic conditions, the molecular structures of two POM-stabilized Ag clusters could be readily tuned by the addition of different organic ligands. In both compounds, the central trefoil-propeller-shaped {Ag24 }14+ and {Ag27 }17+ clusters bearing 10 delocalized valence electrons are stabilized by three C-shaped {Si2 W18 O66 } units. The femtosecond/nanosecond transient absorption spectroscopy revealed the rapid charge transfer between {Ag24 }14+ core and {Si2 W18 O66 } ligands. Both compounds have been pioneeringly investigated as catalysts for photocatalytic CO2 reduction to HCOOH with a high selectivity.
RESUMO
Mixed N-heterocyclic carbene (NHC) / pyridyl iron(II) complexes have attracted a great deal of attention recently because of their potential as photocatalysts and light sensitizers made from Earth-abundant elements. The most decisive challenge for their successful implementation is the lifetime of the lowest triplet metal-to-ligand charge transfer state (3MLCT), which typically decays via a triplet metal-centered (3MC) state back to the ground state. We reveal by variable-temperature ultrafast transient absorption spectroscopy that the tripodal iron(II) bis(pyridine) complex isomers trans- and cis-[Fe(pdmi)2]2+ with four NHC donors show 3MLCTâ3MC population transfers with very different barriers and rationalize this by computational means. While trans-[Fe(pdmi)2]2+ possesses an unobservable activation barrier, the cis isomer exhibits a barrier of 492â cm-1, which leads to a nanosecond 3MLCT lifetime at 77â K. The kinetic and quantum chemical data were analyzed in the context of semi-classical Marcus theory revealing a high reorganization energy and small electronic coupling between the two triplet states. This highlights the importance of detailed structural control and kinetic knowledge for the rational design of photosensitizers from first row transition metals such as iron.
RESUMO
The development of functional artificial photosynthetic devices relies on the understanding of mechanistic aspects involved in specialized photocatalysts. Modified iron porphyrins have long been explored as efficient catalysts for the light-induced reduction of carbon dioxide (CO2) towards solar fuels. In spite of the advancements in homogeneous catalysis, the development of the next generation of catalysts requires a complete understanding of the fundamental photoinduced processes taking place prior to and after activation of the substrate by the catalyst. In this work, we employ a state-of-the-art nanosecond optical transient absorption spectroscopic setup with a double excitation capability to induce charge accumulation and trigger the reduction of CO2 to carbon monoxide (CO). Our biomimetic system is composed of a urea-modified iron(III) tetraphenylporphyrin (UrFeIII) catalyst, the prototypical [Ru(bpy)3]2+ (bpy=2,2'-bipyridine) used as a photosensitizer, and sodium ascorbate as an electron donor. Under inert atmosphere, we show that two electrons can be successively accumulated on the catalyst as the fates of the photogenerated UrFeII and UrFeI reduced species are tracked. In the presence of CO2, the catalytic cycle is kick-started providing further evidence on CO2 activation by the UrFe catalyst in its formal FeI oxidation state.
RESUMO
Although oxygen vacancies (Ovs) have been intensively studied in single semiconductor photocatalysts, exploration of intrinsic mechanisms and in-depth understanding of Ovs in S-scheme heterojunction photocatalysts are still limited. Herein, a novel S-scheme photocatalyst made from WO3-Ov/In2S3 with Ovs at the heterointerface is rationally designed. The microscopic environment and local electronic structure of the S-scheme heterointerface are well optimized by Ovs. Femtosecond transient absorption spectroscopy (fs-TAS) reveals that Ovs trigger additional charge movement routes and therefore increase charge separation efficiency. In addition, Ovs have a synergistic effect on the thermodynamic and kinetic parameters of S-scheme photocatalysts. As a result, the optimal photocatalytic performance is significantly improved, surpassing that of single component WO3-Ov and In2S3 (by 35.5 and 3.9â times, respectively), as well as WO3/In2S3 heterojunction. This work provides new insight into regulating the photogenerated carrier dynamics at the heterointerface and also helps design highly efficient S-scheme photocatalysts.
RESUMO
To address charge recombination in photocatalysis, the prevalent approach involves the use of noble metal cocatalysts. However, the precise factors influencing this performance variability based on cocatalyst selection have remained elusive. In this study, CdS hollow spheres loaded with distinct noble metal nanoparticles (Pt, Au, and Ru) are investigated by femtosecond transient absorption (fs-TA) spectroscopy. A more pronounced internal electric field leads to the creation of a larger Schottky barrier, with the order Pt-CdS > Au-CdS > Ru-CdS. Owing to these varying Schottky barrier heights, the interface electron transfer rate (Ke ) and efficiency (ηe ) of metal-CdS in acetonitrile (ACN) exhibit the following trend: Ru-CdS > Au-CdS > Pt-CdS. However, the trends of Ke and ηe for metal-CdS in water are different (Ru-CdS > Pt-CdS > Au-CdS) due to the influence of water, leading to the consumption of photogenerated electrons and affecting the metal/CdS interface state. Although Ru-CdS displays the highest Ke and ηe , its overall photocatalytic performance, particularly in H2 production, lags behind that of Pt-CdS due to the electron backflow from Ru to CdS. This work offers a fresh perspective on the origin of performance differences and provides valuable insights for cocatalyst design and construction.
RESUMO
Heterostructured Au/CuS nanocrystals (NCs) exhibit localized surface plasmon resonance (LSPR) centered at two different wavelengths (551 and 1051 nm) with a slight broadening compared to respective homostructured Au and CuS NC spectra. By applying ultrafast transient absorption spectroscopy we show that a resonant excitation at the respective LSPR maxima of the heterostructured Au/CuS NCs leads to the characteristic hot charge carrier relaxation associated with both LSPRs in both cases. A comparison of the dual plasmonic heterostructure with a colloidal mixture of homostructured Au and CuS NCs shows that the coupled dual plasmonic interaction is only active in the heterostructured Au/CuS NCs. By investigating the charge carrier dynamics of the process, we find that the observed interaction is faster than phononic or thermal processes (< 100 fs). The relaxation of the generated hot charge carriers is faster for heterostructured nanocrystals and indicates that the interaction occurs as an energy transfer (we propose Landau damping or interaction via LSPR beat oscillations as possible mechanisms) or charge carrier transfer between both materials. Our results strengthen the understanding of multiplasmonic interactions in heterostructured Au/CuS NCs and will significantly advance applications where these interactions are essential, such as catalytic reactions.
RESUMO
Two new Y6 derivatives of symmetrical YBO-2O and asymmetrical YBO-FO nonfullerene acceptors (NFAs) are prepared with a simplified synthetic procedure by incorporating octyl and fluorine substituents onto the terminal 2-(3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile (INCN) moiety. By moving the alkyl substituents on the Y6 core to the terminal INCN moiety, the lowest unoccupied molecular orbital of the YBO NFAs increases without decreasing solubility, resulting in high open-circuit voltages of the devices. Molecular dynamics simulation shows that YBO-2O/-FO preferentially form core-core and terminal-terminal dimeric interactions, demonstrating their tighter packing structure and higher electron mobility than Y6, which is consistent with 2D grazing incidence X-ray scattering and space charge limited current measurements. In blend films, the hole transfer (HT) from YBO-2O/-FO to the polymer donor PM6 is studied in detail by transient absorption spectroscopy, demonstrating efficient HT from YBO-FO to PM6 with their suitable energy level alignment. Despite the simplified synthesis, YBO-FO demonstrates photovoltaic performance similar to that of Y6, exhibiting a power conversion efficiency of 15.01%. Overall, this design strategy not only simplifies the synthetic procedures but also adjusts the electrical properties by modifying the intermolecular packing and energy level alignment, suggesting a novel simplified molecular design of Y6 derivatives.
RESUMO
Covalent functionalization of graphene oxide (GO) with boron dipyrromethenes (BODIPYs) was achieved through a facile synthesis, affording two different GO-BODIPY conjugates where the main difference lies in the nature of the spacer and the type of bonds between the two components. The use of a long but flexible spacer afforded strong electronic GO-BODIPY interactions in the ground state. This drastically altered the light absorption of the BODIPY structure and impeded its selective excitation. In contrast, the utilisation of a short, but rigid spacer based on boronic esters resulted in a perpendicular geometry of the phenyl boronic acid BODIPY (PBA-BODIPY) with respect to the GO plane, which enables only minor electronic GO-BODIPY interactions in the ground state. In this case, selective excitation of PBA-BODIPY was easily achieved, allowing to investigate the excited state interactions. A quantitative ultrafast energy transfer from PBA-BODIPY to GO was observed. Furthermore, due to the reversible dynamic nature of the covalent GO-PBA-BODIPY linkage, some PBA-BODIPY is free in solution and, hence, not quenched from GO. This resulted in a weak, but detectable fluorescence from the PBA-BODIPY that will allow to exploit GO-PBA-BODIPY for slow release and imaging purposes.