All-back-contact neutral-colored transparent crystalline silicon solar cells enabling seamless modularization.

Transparent solar cells (TSCs) hold substantial potential as continuous energy generators, enabling their use in situations where conventional devices may not be feasible. However, research aimed at modularizing TSCs for the purpose of regulating the overall voltage and current they produce, a critical step toward practical application, is still in its nascent stages. In this study, we explored a custom-designed, all-back-contact (ABC) configuration, which situates all electrical contacts on the rear side, to create glass-like transparent crystalline silicon (c-Si) solar cells and seamless modules. The ABC design not only demonstrates high power conversion efficiency (PCE) in solar cells but also ensures unobstructed visibility through transparent solar modules. Notably, ABC-transparent c-Si solar cells achieved a peak PCE of 15.8% while maintaining an average visible transmittance of 20%. Through seamlessly interconnecting the unit cells, the output voltage and power were systematically tuned from 0.64 V and 15.8 mW (for a 1 cm2-sized unit cell) to 10.0 V and 235 mW (for a 16 cm2-sized module). Furthermore, we successfully demonstrated the photocharging of a smartphone using a transparent ABC solar module.

Light diffraction by sarcomeres produces iridescence in transmission in the transparent ghost catfish.

Despite the elaborate varieties of iridescent colors in biological species, most of them are reflective. Here we show the rainbow-like structural colors found in the ghost catfish (Kryptopterus vitreolus), which exist only in transmission. The fish shows flickering iridescence throughout the transparent body. The iridescence originates from the collective diffraction of light after passing through the periodic band structures of the sarcomeres inside the tightly stacked myofibril sheets, and the muscle fibers thus work as transmission gratings. The length of the sarcomeres varies from ~1 µm from the body neutral plane near the skeleton to ~2 µm next to the skin, and the iridescence of a live fish mainly results from the longer sarcomeres. The length of the sarcomere changes by ~80 nm as it relaxes and contracts, and the fish shows a quickly blinking dynamic diffraction pattern as it swims. While similar diffraction colors are also observed in thin slices of muscles from non-transparent species such as the white crucian carps, a transparent skin is required indeed to have such iridescence in live species. The ghost catfish skin is of a plywood structure of collagen fibrils, which allows more than 90% of the incident light to pass directly into the muscles and the diffracted light to exit the body. Our findings could also potentially explain the iridescence in other transparent aquatic species, including the eel larvae (Leptocephalus) and the icefishes (Salangidae).

ReProMSig: an integrative platform for development and application of reproducible multivariable models for cancer prognosis supporting guideline-based transparent reporting.

Adequate reporting is essential for evaluating the performance and clinical utility of a prognostic prediction model. Previous studies indicated a prevalence of incomplete or suboptimal reporting in translational and clinical studies involving development of multivariable prediction models for prognosis, which limited the potential applications of these models. While reporting templates introduced by the established guidelines provide an invaluable framework for reporting prognostic studies uniformly, there is a widespread lack of qualified adherence, which may be due to miscellaneous challenges in manual reporting of extensive model details, especially in the era of precision medicine. Here, we present ReProMSig (Reproducible Prognosis Molecular Signature), a web-based integrative platform providing the analysis framework for development, validation and application of a multivariable prediction model for cancer prognosis, using clinicopathological features and/or molecular profiles. ReProMSig platform supports transparent reporting by presenting both methodology details and analysis results in a strictly structured reporting file, following the guideline checklist with minimal manual input needed. The generated reporting file can be published together with a developed prediction model, to allow thorough interrogation and external validation, as well as online application for prospective cases. We demonstrated the utilities of ReProMSig by development of prognostic molecular signatures for stage II and III colorectal cancer respectively, in comparison with a published signature reproduced by ReProMSig. Together, ReProMSig provides an integrated framework for development, evaluation and application of prognostic/predictive biomarkers for cancer in a more transparent and reproducible way, which would be a useful resource for health care professionals and biomedical researchers.

Facile and Widely Applicable Route to Self-Adaptive Emissivity Modulation: Energy-Saving Demonstration with Transparent Wood.

The cooling power provided by radiative cooling is unwanted during cold hours. Therefore, self-adaptive regulation is desired for radiative cooling, especially in all-weather applications. However, current routes for radiative cooling regulation are constrained by substrates and complicated processing. Here, self-adaptive radiative cooling regulation on various potential substrates (transparent wood, PET, normal glass, and cement) was achieved by a Fabry-Perot structure consisting of a silver nanowires (AgNWs) bottom layer, PMMA spacer, and W-VO2 top layer. The emissivity-modulated transparent wood (EMTW) exhibits an emissivity contrast of 0.44 (ε8-13-L = ∼0.19 and ε8-13-H = ∼0.63), which thereby yields considerable energy savings across different climate zones. The emissivity contrast can be adjusted by varying the spinning parameters during the deposition process. Positive emissivity contrast was also achieved on three other industrially relevant substrates via this facile and widely applicable route. This proves the great significance of the approach to the promotion and wide adoption of radiative cooling regulation concept in the built environment.

Quantum Gas-Enabled Direct Mapping of Active Current Density in Percolating Networks of Nanowires.

Electrically percolating nanowire networks are among the most promising candidates for next-generation transparent electrodes. Scientific interest in these materials stems from their intrinsic current distribution heterogeneity, leading to phenomena like percolating pathway rerouting and localized self-heating, which can cause irreversible damage. Without an experimental technique to resolve the current distribution and an underpinning nonlinear percolation model, one relies on empirical rules and safety factors to engineer materials. We introduce Bose-Einstein condensate microscopy to address the longstanding problem of imaging active current flow in 2D materials. We report on performance improvement of this technique whereby observation of dynamic redistribution of current pathways becomes feasible. We show how this, combined with existing thermal imaging methods, eliminates the need for assumptions between electrical and thermal properties. This will enable testing and modeling individual junction behavior and hot-spot formation. Investigating both reversible and irreversible mechanisms will contribute to improved performance and reliability of devices.

Exploring Doping Mechanisms and Modulating Carrier Concentration in Copper Iodide: Applications in Thermoelectric Materials.

Due to its small hole-effective mass, flexibility, and transparency, copper iodide (CuI) has emerged as a promising p-type alternative to the predominantly used n-type metal oxide semiconductors. However, the lack of effective doping methods hinders the utility of CuI in various applications. Sulfur (S)-doping through liquid iodination is previously reported to significantly enhance electrical conductivity up to 511 S cm-1. In this paper, the underlying doping mechanism with various S-dopants is explored, and suggested a method for controlling electrical conductivity, which is important to various applications, especially thermoelectric (TE) materials. Subsequently, electric and TE properties are systematically controlled by adjusting the carrier concentration from 3.0 × 1019 to 4.5 × 1020 cm-3, and accurately measured thermal conductivity with respect to carrier concentration and film thickness. Sulfur-doped CuI (CuI:S) thin films exhibited a maximum power factor of 5.76 µW cm-1 K-2 at a carrier concentration of 1.3 × 1020 cm-3, and a TE figure of merit (ZT) of 0.25. Furthermore, a transparent and flexible TE power generator is developed, with an impressive output power density of 43 nW cm-2 at a temperature differential of 30 K. Mechanical durability tests validated the potential of CuI:S films in transparent and flexible TE applications.

Conductive MXene/Polymer Composites for Transparent Flexible Supercapacitors.

Transparent flexible energy storage devices are limited by the trade-off among flexibility, transparency, and charge storage capability of their electrode materials. Conductive polymers are intrinsically flexible, but limited by small capacitance. Pseudocapacitive MXene provides high capacitance, yet their opaque and brittle nature hinders their flexibility and transparency. Herein, the development of synergistically interacting conductive polymer Ti3C2Tx MXene/PEDOT:PSS composites is reported for transparent flexible all-solid-state supercapacitors, with an outstanding areal capacitance of 3.1 mF cm-2, a high optical transparency of 61.6%, and excellent flexibility and durability. The high capacitance and high transparency of the devices stem from the uniform and thorough blending of PEDOT:PSS and Ti3C2Tx, which is associated with the formation of O─H…O H-bonds in the composites. The conductive MXene/polymer composite electrodes demonstrate a rational means to achieve high-capacity, transparent and flexible supercapacitors in an easy and scalable manner.

Biomimetic Transparent Layered Tough Aerogels for Thermal Superinsulation and Triboelectric Nanogenerator.

Transparent aerogels are ideal candidates for thermally insulating windows, solar thermal receivers, electronics, etc. However, they are usually prepared via energy-consuming supercritical drying and show brittleness and low tensile strength, significantly restricting their practical applications. It remains a great challenge to prepare transparent aerogels with high tensile strength and toughness. Herein, biomimetic transparent tough cellulose nanofiber-based nanocomposite aerogels with a layered nanofibrous structure are achieved by vacuum-assisted self-assembly combined with ambient pressure drying. The nacre-like layered homogeneous nanoporous structures can reduce light scattering and effectively transfer stress and prevent stress concentration under external forces. The aerogels exhibit an attractive combination of excellent transparency and hydrophobicity, high compressive and tensile strengths, high toughness, excellent machinability, thermal superinsulation, and wide working temperature range (-196 to 230 °C). It is demonstrated that they can be used for superinsulating windows of buildings and high-efficient thermal management for electronics and human bodies. In addition, a prototype of transparent flexible aerogel-based triboelectric nanogenerator is developed. This work provides a promising pathway toward transparent tough porous materials for energy saving/harvesting, thermal management, electronics, sensors, etc.

Macrocyclic Supramolecular Glass: New Type of Supramolecular Transparent Materials.

Transparent materials are widely used in industries, everyday life, and scientific activities. The development of new, lightweight, and durable artificial transparent materials is a challenge in synthetic chemistry. In this study, a supramolecular approach is conceived to construct transparent glass. Cyclodextrins are selected as the building blocks for the fabrication of supramolecular glass via noncovalent polymerization. The newly formed glass displays several attractive advantages, including good thermal processability, high mechanical strength and dielectric constant, excellent visible light transparency, and good adhesion performance. Importantly, the structural characteristics of long-range disorder and short-range order are observed in cyclodextrin glass. Here a new strategy is presented for the preparation and functionalization of low-molecular-weight transparent materials.

Adaptive Thermal Management Radiative Cooling Smart Window with Perfect Near-Infrared Shielding.

The architectural window with spectrally selective features and radiative cooling is an effective way to save building energy consumption. However, architectural windows that combine both functions are currently based on micro-nano photonic structures, which undoubtedly hinder their commercial application due to the complexity of manufacture. Herein, a novel tunable visible light transmittance radiative cooling smart window (TTRC smart window) with perfect near-infrared (NIR) shielding ability is manufactured via a mass-producible scraping method. TTRC smart window presents high luminous transmittance (Tlum = 56.8%), perfect NIR shielding (TNIR = 3.4%), bidirectional transparency adjustment ability unavailable in other transparent radiative coolers based on photonic structures (ΔTlum = 54.2%), and high emittance in the atmospheric window (over 94%). Outdoor measurements confirm that smart window can reduce 8.2 and 6.6 °C, respectively, compared to ordinary glass and indium tin oxide (ITO) glass. Moreover, TTRC smart window can save over 20% of annual energy in the tropics compared to ITO and ordinary glass. The simple preparation method employed in this work and the superior optical properties of the smart window have significantly broadened the scope of application of architectural windows and advanced the commercialization of architectural windows.

Insight into the High Mobility and Stability of In2 O3 :H Film.

Wide bandgap semiconductors, particularly In2 O3 :Sn (ITO), are widely used as transparent conductive electrodes in optoelectronic devices. Nevertheless, due to the strohave beenng scattering probability of high-concentration oxygen vacancy (VO ) defects, the mobility of ITO is always lower than 40 cm2  V-1  s-1 . Recently, hydrogen-doped In2 O3 (In2 O3 :H) films have been proven to have high mobility (>100 cm2  V-1  s-1 ), but the origin of this high mobility is still unclear. Herein, a high-resolution electron microscope and theoretical calculations are employed to investigate the atomic-scale mechanisms behind the high carrier mobility in In2 O3 :H films. It is found that VO can cause strong lattice distortion and large carrier scattering probability, resulting in low carrier mobility. Furthermore, hydrogen doping can simultaneously reduce the concentration of VO , which accounts for high carrier mobility. The thermal stability and acid-base corrosion mechanism of the In2 O3 :H film are investigated and found that hydrogen overflows from the film at high temperatures (>250 °C), while acidic or alkaline environments can cause damage to the In2 O3 grains themselves. Overall, this work provides insights into the essential reasons for high carrier mobility in In2 O3 :H and presents a new research approach to the doping and stability mechanisms of transparent conductive oxides.

Vertically Stacked Transparent Organic Photodetectors for Light Intensity-Independent Wavelength Recognition.

Wavelength recognition is one of the important functions of photodetectors. However, wavelength recognition of the reported photodetectors generally depends on light intensity, which limits the practical applications. Here, a light intensity-independent wavelength recognition scheme based on vertically stacked transparent photodetectors is reported. By analyzing light intensity attenuation behavior in the multiple stacked photodetectors, the wavelength of incident light can be accurately determined. Due to the high transparency of the detectors, the multiple stacked detectors allow incident light to pass through. Meanwhile, since the attenuation coefficients at different wavelengths are attributed to the detector's absorption characteristics, the intensity of incident light and its wavelength can be determined by analyzing the attenuation coefficients measured through each stacked detector. Consistent wavelength values obtained at different light intensities verify the light intensity-independence of the multistacked detector system.

Strong Yet Tough Transparent Paper with Superb Foldability.

Transparent paper manufactured from wood fibers is emerging as a promising, cost-effective, and carbon-neutral alternatives to plastics. However, fully exploring their mechanical properties is one of the most pressing challenges. In this work, a strong yet tough transparent paper with superior folding endurance is prepared by rationally altering the native fiber structure. Microwave-assisted choline chloride/lactic acid deep eutectic solvent (DES) pulping is first utilized to isolate wood fibers from spruce wood. During this process, the S1 layer within the fibers is partially disrupted, forming protruding microfibrils that play a crucial role in enhancing cellulose accessibility. Subsequently, carboxymethylation treatment is applied to yield uniformly swollen carboxymethylated wood fibers (CM fibers), which improves the interaction between CM fibers during papermaking. The as-prepared transparent paper not only shows a 90% light transmittance (550 nm) but also exhibits impressive mechanical properties, including a folding endurance of over 26 000, a tensile strength of 248.4 MPa, and a toughness of 15.6 MJ m-3. This work provides a promising route for manufacturing transparent paper with superior mechanical properties from wood fibers and can extend their use in areas normally dominated by high-performance nonrenewable plastics.

Superior Energy Storage Capability and Fluorescence Negative Thermal Expansion of NaNbO3-Based Transparent Ceramics by Synergistic Optimization.

Transparent dielectric ceramics are splendid candidates for transparent pulse capacitors (TPCs) due to splendid cycle stability and large power density. However, the performance and service life of TPCs at present are threatened by overheating damage caused by dielectric loss. Here, a cooperative optimization strategy of microstructure control and superparaelectric regional regulation is proposed to simultaneously achieve excellent energy storage performance and real-time temperature monitoring function in NaNbO3-based ceramics. By introducing aliovalent ions and oxides with large bandgap energy, the size of polar nanoregions is continuously reduced. Due to the combined effect of increased relaxor behavior and fine grains, excellent comprehensive performances are obtained through doping appropriate amounts of Bi, Yb, Tm, and Zr, Ta, Hf in A- and B-sites of the NaNbO3 matrix, including recoverable energy storage density (5.39 J cm-3), extremely high energy storage efficiency (91.97%), ultra-fast discharge time (29 ns), and superior optical transmittance (≈47.5% at 736 nm). Additionally, the phenomenon of abnormal fluorescent negative thermal expansion is realized due to activation mechanism of surface phonon at high temperatures that can promote the formation of [Yb···O]-Tm3+ pairs, showing great potential in real-time temperature monitoring of TPCs. This research provides ideas for developing electronic devices with multiple functionalities.

Highly Transmittance, Mechanical, Thermally Stable Silver Nanowires Network Using ZnO Nanoparticles.

This research addresses challenges with silver nanowires (Ag NWs) as transparent conductive electrodes (TCEs) and heaters in commercial devices. Here, zinc oxide nanoparticles (ZnO NPs) are first reported as a protective layer for Ag NWs. Multi-physics simulations confirm enhanced thermal stability due to improved heat dissipation, temperature distribution, and thermal conductivity from ZnO. When Ag NWs are surrounded by air, heat transfers mainly through convection and radiation because of air's low conduction coefficient. Encasing Ag NWs in ZnO enhances heat transfer to the ZnO surface, accelerating cooling and dissipating more heat into the atmosphere via convection. The results show composite's efficiency in the Joule effect, maintaining a consistent temperature of 78 °C for 700 s after 500 bending cycles, a significant improvement over Ag NWs operating for only 5 s at 80 °C. Additionally, the composite film exhibited exceptional performance, including a sheet resistance of 9.8 Ω sq-1 and an optical transmittance of 96.96 %, outperforming Ag NWs, which have a sheet resistance of 12 Ω sq-1 and a transmittance of 94.11%. The combination of enhanced electrical, thermal, and mechanical stability, along with impressive optical properties, makes Ag NWs/ZnO NPs a promising candidate for transparent conductive electrode materials in various applications.

Hypoeutectic Liquid Metal Printing of 2D Indium Gallium Oxide Transistors.

2D native surface oxides formed on low melting temperature metals such as indium and gallium offer unique opportunities for fabricating high-performance flexible electronics and optoelectronics based on a new class of liquid metal printing (LMP). An inherent property of these Cabrera-Mott 2D oxides is their suboxide nature (e.g., In2O3-x), which leads high mobility LMP semiconductors to exhibit high electron concentrations (ne > 1019 cm-3) limiting electrostatic control. Binary alloying of the molten precursor can produce doped, ternary metal oxides such as In-X-O with enhanced electronic performance and greater bias-stress stability, though this approach demands a deeper understanding of the native oxides of alloys. This work presents an approach for hypoeutectic rapid LMP of crystalline InGaOx (IGO) at ultralow process temperatures (180 °C) beyond the state of the art to fabricate transistors with 10X steeper subthreshold slope and high mobility (≈18 cm2 Vs-1). Detailed characterization of IGO crystallinity, composition, and morphology, as well as measurements of its electronic density of states (DOS), show the impact of Ga-doping and reveal the limits of doping induced amorphization from hypoeutectic precursors. The ultralow process temperatures and compatibility with high-k Al2O3 dielectrics shown here indicate potential for 2D IGO to drive low-power flexible transparent electronics.

Lightweight, Strong, and Transparent Wood Films Produced by Capillary Driven Self-Densification.

Wood delignification and densification enable the production of high strength and/or transparent wood materials with exceptional properties. However, processing needs to be more sustainable and besides the chemical delignification treatments, energy intense hot-pressing calls for alternative approaches. Here, this study shows that additional softening of delignified wood via a mild swelling process using an ionic liquid-water mixture enables the densification of tube-line wood cells into layer-by-layer sheet structures without hot-pressing. The natural capillary force induces self-densification in a simple drying process resulting in a transparent wood film. The as-prepared films with ≈150 µm thickness possess an optical transmittance ≈70%, while maintaining optical haze >95%. Due to the densely packed sheet structure with a large interfacial area, the reassembled wood film is fivefold stronger and stiffer than the delignified wood in fiber direction. Owing to a low density, the specific tensile strength and elastic modulus are as high as 282 MPa cm3 g-1 and 31 GPa cm3 g-1. A facile and highly energy efficient wood nanotechnology approach are demonstrated toward more sustainable materials and processes by directly converting delignified wood into transparent wood omitting polymeric matrix infiltration or mechanical pressing.

Self-Catalyzed Hydrogenated Carbon Nano-Onions Facilitates Mild Synthesis of Transparent Nano-Polycrystalline Diamond.

Transparent nano-polycrystalline diamond (t-NPD) possesses superior mechanical properties compared to single and traditional polycrystalline diamonds. However, the harsh synthetic conditions significantly limit its synthesis and applications. In this study, a synthesis routine is presented for t-NPD under low pressure and low temperature conditions, 10 GPa, 1600 °C and 15 GPa, 1350 °C similar with the synthesis condition of organic precursor. Self-catalyzed hydrogenated carbon nano-onions (HCNOs) from the combustion of naphthalene enable synthesis under nearly industrial conditions, which are like organic precursor and much lower than that of graphite and other carbon allotropes. This is made possible thanks to the significant impact of hydrogen on the thermodynamics, as it chemically facilitates phase transition. Ubiquitous nanotwinned structures are observed throughout t-NPD due to the high concentration of puckered layers and stacking faults of HCNOs, which impart a Vickers hardness about 140 GPa. This high hardness and optical transparency can be attributed to the nanocrystalline grain size, thin intergranular films, absence of secondary phase and pore-free features. The facile and industrial-scale synthesis of the HCNOs precursor, and mild synthesis conditions make t-NPD suitable for a wide range of potential applications.

Self-Thermal Management in Filtered Selenium-Terminated MXene Films for Flexible Safe Batteries.

Li-ion batteries with superior interior thermal management are crucial to prevent thermal runaway and ensure safe, long-lasting operation at high temperatures or during rapid discharging and charging. Typically, such thermal management is achieved by focusing on the separator and electrolyte. Here, the study introduces a Se-terminated MXene free-standing electrode with exceptional electrical conductivity and low infrared emissivity, synergistically combining high-rate capacity with reduced heat radiation for safe, large, and fast Li+ storage. This is achieved through a one-step organic Lewis acid-assisted gas-phase reaction and vacuum filtration. The Se-terminated Nb2Se2C outperformed conventional disordered O/OH/F-terminated materials, enhancing Li+-storage capacity by ≈1.5 times in the fifth cycle (221 mAh·g-1 at 1 A·g-1) and improving mid-infrared adsorption with low thermal radiation. These benefits result from its superior electrical conductivity, excellent structural stability, and high permittivity in the infrared region. Calculations further reveal that increased permittivity and conductivity along the z-direction can reduce heat radiation from electrodes. This work highlights the potential of surface groups-terminated layered material-based free-standing flexible electrodes with self-thermal management ability for safe, fast energy storage.

Efficient Flexible Fabric-Based Top-Emitting Polymer Light-Emitting Devices for Wearable Electronics.

Low-cost fabric-based top-emitting polymer light-emitting devices (Fa-TPLEDs) have aroused increasing attention due to their remarkable potential applications in wearable displays. However, it is still challenging to realize efficient all-solution-processed devices from bottom electrodes to top electrodes with large-scale fabrication. Here, a smooth reflective Ag cathode integrated on fabric by one-step silver mirror reaction and a composite transparent anode of polydimethylsiloxane/silver nanowires/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) via a water-assisted peeling method are presented, both of which possess excellent optoelectrical properties and robust mechanical flexibility. The Fa-TPLEDs are constructed by spin-coating functional layers on the bottom reflective cathodes and laminating the top transparent anodes. The Fa-TPLEDs show a current efficiency of 16.3 cd A-1 , an external quantum efficiency of 4.9% and angle-independent electroluminescence spectra. In addition, the Fa-TPLEDs possess excellent mechanical stability, maintaining a current efficiency of 14.3 cd A-1 after 200 bending cycles at a radius of 4 mm. The results demonstrate that the integration of solution-processed reflective cathodes and transparent anodes sheds light on a new avenue to construct low-cost and efficient fabric-based devices, showing great potential applications in emerging smart flexible/wearable electronics.