Complexation-Triggered Fluctuation of π-Conjugation on an Antiaromatic Dicyanoanthracene Dianion.

The formation of Lewis pairs is an important chemical concept. Recently, the complexation of Lewis acidic tris(pentafluorophenyl)borane with Lewis basic moieties and subsequent reduction has emerged as a fascinating strategy for designing novel reactions and structures. The impact of the complexation and subsequent reduction of antiaromatic systems bearing Lewis base moieties has been investigated. We found how Lewis adduct formation stabilizes an antiaromatic system consisting of 9,10-dicyanoanthracene and tris(pentafluorophenyl)borane by using synthesis, X-ray crystallography, spectroscopic analysis, and quantum chemical calculations.

Tris(pentafluorophenyl)borane-catalyzed Hydride Transfer Reactions in Polysiloxane Chemistry-Piers-Rubinsztajn Reaction and Related Processes.

Tris(pentafluorophenyl)borane (TPFPB) is a unique Lewis acid that catalyzes the condensation between hydrosilanes (Si-H) and alkoxysilanes (Si-OR), leading to the formation of siloxane bonds (Si-OSi) with the release of hydrocarbon (R-H) as a byproduct-the so-called Piers-Rubinsztajn reaction. The analogous reactions of hydrosilanes with silanols (Si-OH), alcohols (R-OH), ethers (R-OR') or water in the presence of TPFPB leads to the formation of a siloxane bond, alkoxysilane (Si-OR or Si-OR') or silanol (Si-OH), respectively. The above processes, often referred to as Piers-Rubinsztajn reactions, provide new synthetic tools for the controlled synthesis of siloxane materials under mild conditions with high yields. The common feature of these reactions is the TPFPB-mediated hydride transfer from silicon to carbon or hydrogen. This review presents a summary of 20 years of research efforts related to this field, with a focus on new synthetic methodologies leading to numerous previously difficult to synthesize well-defined siloxane oligomers, polymers and copolymers of a complex structure and potential applications of these new materials. In addition, the mechanistic aspects of the recently discovered reactions involving hydride transfer from silicon to silicon are discussed in more detail.

Understanding the Influence of Donor-Acceptor Diazo Compounds on the Catalyst Efficiency of B(C6 F5 )3 Towards Carbene Formation.

Diazo compounds have been largely used as carbene precursors for carbene transfer reactions in a variety of functionalization reactions. However, the ease of carbene generation from the corresponding diazo compounds depends upon the electron donating/withdrawing substituents either side of the diazo functionality. These groups strongly impact the ease of N2 release. Recently, tris(pentafluorophenyl)borane [B(C6 F5 )3 ] has been shown to be an alternative transition metal-free catalyst for carbene transfer reactions. Herein, a density functional theory (DFT) study on the generation of carbene species from α-aryl α-diazocarbonyl compounds using catalytic amounts of B(C6 F5 )3 is reported. The significant finding is that the efficiency of the catalyst depends directly on the nature of the substituents on both the aryl ring and the carbonyl group of the substrate. In some cases, the boron catalyst has negligible effect on the ease of the carbene formation, while in other cases there is a dramatic reduction in the activation energy of the reaction. This direct dependence is not commonly observed in catalysis and this finding opens the way for intelligent design of this and other similar catalytic reactions.

Stable Anion-Derived Solid Electrolyte Interphase in Lithium Metal Batteries.

High-energy-density lithium (Li) metal batteries are severely hindered by the dendritic Li deposition dictated by non-uniform solid electrolyte interphase (SEI). Despite its unique advantages in improving the uniformity of Li deposition, the current anion-derived SEI is unsatisfactory under practical conditions. Herein regulating the electrolyte structure of anions by anion receptors was proposed to construct stable anion-derived SEI. Tris(pentafluorophenyl)borane (TPFPB) anion acceptors with electron-deficient boron atoms interact with bis(fluorosulfonyl)imide anions (FSI- ) and decrease the reduction stability of FSI- . Furthermore, the type of aggregate cluster of FSI- in electrolyte changes, FSI- interacting with more Li ions in the presence of TPFPB. Therefore, the decomposition of FSI- to form Li2 S is promoted, improving the stability of anion-derived SEI. In working Li | LiNi0.5 Co0.2 Mn0.3 O2 batteries under practical conditions, the anion-derived SEI with TPFPB undergoes 194 cycles compared with 98 cycles of routine anion-derived SEI. This work inspires a fresh ground to construct stable anion-derived SEI by manipulating the electrolyte structure of anions.

A "Push-Pull" Stabilized Phosphinidene Supported by a Phosphine-Functionalized ß-Diketiminato Ligand.

The use of a bis(diphenyl)phosphine functionalized ß-diketiminato ligand, [HC{(CH3 )C}2 {(ortho-[P(C6 H5 )2 ]2 C6 H4 )N}2 ]- (PNac), as a support for germanium(II) and tin(II) chloride and phosphaketene compounds, is described. The conformational flexibility and hemilability of this unique ligand provide a versatile coordination environment that can accommodate the electronic needs of the ligated elements. For example, chloride abstraction from [(PNac)ECl] (E=Ge, Sn) affords the cationic germyliumylidene and stannyliumylidene species [(PNac)E]+ in which the pendant phosphine arms associate more strongly with the Lewis acidic main group element centers, providing further electronic stabilization. In a similar fashion, chemical decarbonylation of the germanium phosphaketene [(PNac)Ge(PCO)] with tris(pentafluorophenyl)borane affords a "push-pull" stabilized phosphinidene in which one of the phosphine groups of the ligand backbone associates with the low valent phosphinidene center.

An Unusual and Facile Synthetic Route to Alumoles.

Reaction of the aluminum dialkynyl LAl(CCR)2 (L=N,N-chelate ligand and R=organic group) with B(C6 F5 )3 proceeds through an intermediate with Al⋅⋅⋅η2 -C≡C side-on coordination to form the alumoles (2, 4, 6). A distinctive reaction pattern indicates a new facile synthetic route to aluminum-containing heterocycles. The synthetic process is described, and the characterization of compounds and computational calculations were carried out. Furthermore, alumoles 2 and 4 exhibit an aggregation-induced emission (AIE) of the bright yellow fluorescence.

Triarylborane-Catalyzed Alkenylation Reactions of Aryl Esters with Diazo Compounds.

Herein we report a facile, mild reaction protocol to form carbon-carbon bonds in the absence of transition metal catalysts. We demonstrate the metal-free alkenylation reactions of aryl esters with α-diazoesters to give highly functionalized enyne products. Catalytic amounts of tris(pentafluorophenyl)borane (10-20 mol %) are employed to afford the C=C coupled products (31 examples) in good to excellent yields (36-87 %). DFT studies were used to elucidate the mechanism for this alkenylation reaction.

Tris(pentafluorophenyl)borane-Catalyzed Reactions Using Silanes.

The utility of an electron-deficient, air stable, and commercially available Lewis acid tris(pentafluorophenyl)borane has recently been comprehensively explored. While being as reactive as its distant cousin boron trichloride, it has been shown to be much more stable and capable of catalyzing a variety of powerful transformations, even in the presence of water. The focus of this review will be to highlight those catalytic reactions that utilize a silane as a stoichiometric reductant in conjunction with tris(pentafluorophenyl) borane in the reduction of alcohols, carbonyls, or carbonyl-like derivatives.

Allylation of Orthoquinones Towards Annulated Polycyclic Aromatic Systems.

Promising results of an efficient and convenient strategy for the annulation of polycyclic aromatic compounds (PACs), employing orthoquinones as starting material and comprising allylation, pinacol rearrangement, ring-closing metathesis (RCM), and one-pot reduction followed by Wagner-Meerwein rearrangement, are presented. The strategy involves introducing triallylborane prepared in situ in the allylation step. Moreover, a novel expedient method for the preparation of 9,10-diallylphenanthrene was introduced.

A Step Closer to Metal-Free Dinitrogen Activation: A New Chapter in the Chemistry of Frustrated Lewis Pairs.

The end of the metal age: Recent developments in small-molecule activation and chemical transformations of main-group species pose the question as to whether metal catalysts could be avoided altogether in the activation of dinitrogen. A ground-breaking study by Stephan and co-workers clearly implies that the metal-free activation of N2 with frustrated Lewis pairs may be achievable in the not-too-distant future.

Stoichiometric and Catalytic C-C and C-H Bond Formation with B(C6 F5 )3 via Cationic Intermediates.

This work showcases a new catalytic cyclization reaction using a highly Lewis acidic borane with concomitant C-H or C-C bond formation. The activation of alkyne-containing substrates with B(C6 F5 )3 enabled the first catalytic intramolecular cyclizations of carboxylic acid substrates using this Lewis acid. In addition, intramolecular cyclizations of esters enable C-C bond formation as catalytic B(C6 F5 )3 can be used to effect formal 1,5-alkyl migrations from the ester functional groups to unsaturated carbon-carbon frameworks. This metal-free method was used for the catalytic formation of complex dihydropyrones and isocoumarins in very good yields under relatively mild conditions with excellent atom efficiency.

Tris(perfluorotolyl)borane-A Boron Lewis Superacid.

Tris[tetrafluoro-4-(trifluoromethyl)phenyl]borane (BTolF) was prepared by treating boron tribromide with tetrameric F3 CC6 F4 -CuI . The F3 CC6 F4 -CuI was generated from F3 CC6 F4 MgBr and copper(I) bromide. Lewis acidities of BTolF evaluated by the Gutmann-Beckett method and calculated fluoride-ion affinities are 9 and 10 %, respectively, higher than that of tris(pentafluorophenyl)borane (BCF) and even higher than that of SbF5 . The molecular structures of BTolF and BCF were determined by gas-phase electron diffraction, that of BTolF also by single-crystal X-ray diffraction.

Dioxygen reactivity with a ferrocene-Lewis acid pairing: reduction to a boron peroxide in the presence of tris(pentafluorophenyl)borane.

Ferrocenes, which are typically air-stable outer-sphere single-electron transfer reagents, were found to react with dioxygen in the presence of B(C6 F5 )3 , a Lewis acid unreactive to O2 , to generate bis(borane) peroxide. Although several Group 13 peroxides have been reported, boron-supported peroxides are rare, with no structurally characterized examples of the BO2 B moiety. The synthesis of a bis(borane)-supported peroxide anion and its structural and electrochemical characterization are described.

Self-Restructuring of Polyhydromethylsiloxanes by the Hydride Transfer Process: A New Approach to the Cross-Linking of Polysiloxanes and to the Fabrication of Thin Polysiloxane Coatings.

The branching and cross-linking of siloxane polymers are important processes in silicone technology. A new type of such a process has been developed, which is a self-restructuring of linear polyhydromethylsiloxane (PHMS). This process involves the reorganization of the PHMS to form a highly branched siloxane polymer or finally a cross-linked siloxane network. It occurs through the transfer of a hydride ion between silicon atoms catalyzed by tris(pentafluoromethyl)borane. Its advantage over existing branching and cross-linking reactions is that it runs at room temperature without a low-molecular-weight cross-linker in the absence of water, silanol groups, or other protic compounds and it does not use metal catalysts. The study of this process was carried out in toluene solution. Its course was followed by 1H NMR, 29Si NMR and FTIR, SEC, and gas chromatography. A general mechanism of this new self-restructuring process supported by quantum calculations is proposed. It has been shown that a linear PHMS self-restructured to a highly branched polymer can serve as a pure methylsiloxane film precursor.

Postpassivation of Cs0.05(FA0.83MA0.17)0.95Pb(I0.83Br0.17)3 Perovskite Films with Tris(pentafluorophenyl)borane.

Passivating defects to suppress recombination is a valid tactic to improve the performance of third-generation perovskite-based solar cells. Pb0 is the primary defect in Pb-based perovskites. Here, tris(pentafluorophenyl)borane is inserted between the perovskite and spiro-OMeTAD layer in SnO2-based planar perovskite solar cells. The incorporation of tris(pentafluorophenyl)borane can effectively passivate Pb0 defects, decreasing recombination at the surface of the perovskite film. Additionally, the modification with tris(pentafluorophenyl)borane decreases the grain boundaries quantity in the perovskite film, enhancing the transportation capability of carriers. The resulting perovskite solar cell gets a high efficiency of 21.42%. While the reference device without tris(pentafluorophenyl)borane treatment acquires an efficiency of 19.07%. More importantly, the stability tests manifest that incorporating tris(pentafluorophenyl)borane in perovskite solar cells is conducive to the stability of the device.

Selective Ammonia-Sensing Platforms Based on a Solution-Processed Film of Poly(3-Hexylthiophene) and p-Doping Tris(Pentafluorophenyl)Borane.

Here, we fabricate ammonia sensors based on organic transistors by using poly(3-hexylthiophene) (P3HT) blended with tris(pentafluorophenyl)borane (TPFB) as an active layer. As TPFB is an efficient p-type dopant for P3HT, the current level of the blend films can be easily modulated by controlling the blend ratio. The devices exhibit significantly increased on-state and off-state current levels owing to the ohmic current originated from the large number of charge carriers when the active polymer layer contains TPFB with concentrations up to 20 wt % (P3HT:TPFB = 8:2). The current is decreased at 40 wt % of TPFB (P3HT:TPFB = 6:4). The P3HT:TPFB blend with a weight ratio of 9:1 exhibits the highest sensing performances for various concentrations of ammonia. The device exhibits an increased percentage current response compared to that of a pristine P3HT device. The current response of the P3HT:TPFB (9:1) device at 100 ppm of ammonia is as high as 65.8%, 3.2 times that of the pristine P3HT (20.3%). Furthermore, the sensor based on the blend exhibits a remarkable selectivity to ammonia with respect to acetone, methanol, and dichloromethane, owing to the strong interaction between the Lewis acid (TPFB) and Lewis base (ammonia).

Characteristics and Mechanism of Vinyl Ether Cationic Polymerization in Aqueous Media Initiated by Alcohol/B(C6F5)3/Et2O.

Aqueous cationic polymerizations of vinyl ethers (isobutyl vinyl ether (IBVE), 2-chloroethyl vinyl ether (CEVE), and n-butyl vinyl ether (n-BVE)) were performed for the first time by a CumOH/B(C6F5)3/Et2O initiating system in an air atmosphere. The polymerization proceeded in a reproducible manner through the careful design of experimental conditions (adding initiator, co-solvents, and surfactant or decreasing the reaction temperature), and the polymerization characteristics were systematically tested and compared in the suspension and emulsion. The significant difference with traditional cationic polymerization is that the polymerization rate in aqueous media using B(C6F5)3/Et2O as a co-initiator decreases when the temperature is lowered. The polymerization sites are located on the monomer/water surface. Density functional theory (DFT) was applied to investigate the competition between H2O and alcohol combined with B(C6F5)3 for providing a theoretical basis. The effectiveness of the proposed mechanism for the aqueous cationic polymerization of vinyl ethers using CumOH/B(C6F5)3/Et2O was confirmed.

Understanding the Electrode/Electrolyte Interface Layer on the Li-Rich Nickel Manganese Cobalt Layered Oxide Cathode by XPS.

Layered lithium-rich nickel manganese cobalt oxide (LR-NMC) represents one of the most promising cathode materials for application in high energy density lithium-ion batteries. The extraordinary capacity delivered derives from a combination of both cationic and anionic redox processes. However, the latter ones lead to oxygen evolution which triggers structural degradation and electrode/electrolyte interface (EEI) instability that hinders the use of LR-NMC in practical application. In this work, we investigate the surface chemistry of LR-NMC and its evolution upon different conditions to give further insights into the processes occurring at the EEI. X-ray photoelectron spectroscopy studies reveal that once the organic component of the layer is formed, it remains stable independently on the higher cutoff voltage applied, while continuous growth of inorganics along with oxygen evolution occurs. The results performed on lithiated and delithiated LR-NMC surfaces indicate an instability of the EEI layer formed at high voltages, which undergoes a partial decomposition. Furthermore, the tris(pentafluorophenyl)borane electrolyte additive simultaneously prevents excess LiF formation and changes the chemical composition of the EEI layer. The latter is characterized by a higher amount of poly(ethylene oxide) oligomer species and LixPOyFz formation. In addition, the presence of boron-containing compounds in the EEI layer cannot be excluded, which may be also responsible of the increased thickness of the EEI layer. Finally, fast kinetics at elevated temperatures exacerbate the salt decomposition which results in the formation of an EEI which is thicker and richer in LiF.

Ring-Opening Polymerization of 1,3-Benzoxazines via Borane Catalyst.

Tris(pentafluorophenyl)borane was used as Lewis acid catalyst to lower the ring opening polymerization temperature (ROP) of 1,3-benzoxazines. Dynamic scanning calorimeter studies revealed that on-set ROP temperatures were decreased as much as 98 °C for model benzoxazine compounds. Catalytic polymerization was traced by both FTIR and ¹H NMR, and revealed that tris(pentafluorophenyl)borane acted rapidly and fast curing achieved. Moreover, thermal properties of resulting polybenzoxazines were investigated by thermogravimetric analysis (TGA) and found out that the catalyst has high impact on char yield and even 3 mol % catalyst augmented char yields up to 13%.

Improved Performance and Reproducibility of Perovskite Solar Cells by Well-Soluble Tris(pentafluorophenyl)borane as a p-Type Dopant.

In this work, well-soluble tris(pentafluorophenyl)borane (BCF) is introduced for the first time into 2,2',7,7'-tetrakis(N,N'-di-p-methoxyphenylamine)-9,9'-spirobifluorene (spiro-OMeTAD) as a p-dopant. The conductivity of spiro-OMeTAD films is dramatically enhanced. When the BCF-doped spiro-OMeTAD film is used as a hole-transport layer (HTL) in perovskite solar cells (PSCs), nearly double increase in power conversion efficiency (PCE) is obtained compared to that of the PSCs based on a pristine spiro-OMeTAD HTL. By the introduction of lithium bis(trifluoromethanesulfonyl)imide and 4-tert-butylpyridine into the BCF-doped spiro-OMeTAD film, the conductivity of spiro-OMeTAD film can be further enhanced, and an optimum PCE of 14.65% is obtained. In addition, the average efficiency of the device and the reproducibility of BCF-based PSCs are better than those of FK209-based PSCs. The working mechanism of the BCF doping effect on spiro-OMeTAD is studied in detail. The strong electron-accepting ability, excellent solubility in common organic solvents, and the low cost make BCF a very attractive p-type dopant for spiro-OMeTAD.