Hydration solids.

Hygroscopic biological matter in plants, fungi and bacteria make up a large fraction of Earth's biomass1. Although metabolically inert, these water-responsive materials exchange water with the environment and actuate movement2-5 and have inspired technological uses6,7. Despite the variety in chemical composition, hygroscopic biological materials across multiple kingdoms of life exhibit similar mechanical behaviours including changes in size and stiffness with relative humidity8-13. Here we report atomic force microscopy measurements on the hygroscopic spores14,15 of a common soil bacterium and develop a theory that captures the observed equilibrium, non-equilibrium and water-responsive mechanical behaviours, finding that these are controlled by the hydration force16-18. Our theory based on the hydration force explains an extreme slowdown of water transport and successfully predicts a strong nonlinear elasticity and a transition in mechanical properties that differs from glassy and poroelastic behaviours. These results indicate that water not only endows biological matter with fluidity but also can-through the hydration force-control macroscopic properties and give rise to a 'hydration solid' with unusual properties. A large fraction of biological matter could belong to this distinct class of solid matter.

Surface display system of Bacillus subtilis: A promising approach for improving the stability and applications of cellobiose dehydrogenase.

Cellobiose dehydrogenase (CDH) plays a crucial role in lignocellulose degradation and bioelectrochemical industries, making it highly in demand. However, the production and purification of CDH through fungal heterologous expression methods is time-consuming, costly, and challenging. In this study, we successfully displayed Pycnoporus sanguineus CDH (psCDH) on the surface of Bacillus subtilis spores for the first time. Enzymatic characterization revealed that spore surface display enhanced the tolerance of psCDH to high temperature (80 °C) and low pH levels (3.5) compared to free psCDH. Furthermore, we found that glycerol, lactic acid, and malic acid promoted the activity of immobilized spore-displayed psCDH; glycerol has a more significant stimulating effect, increasing the activity from 16.86 ± 1.27 U/mL to 46.26 ± 3.25 U/mL. After four reuse cycles, the psCDH immobilized with spores retained 48% of its initial activity, demonstrating a substantial recovery rate. In conclusion, the spore display system, relying on cotG, enables the expression and immobilization of CDH while enhancing its resistance to adverse conditions. This system demonstrates efficient enzyme recovery and reuse. This approach provides a novel method and strategy for the immobilization and stability enhancement of CDH.

Assessing CaDPA levels, metabolic activity, and spore detection through deuterium labeling.

Many strains among spore-forming bacteria species are associated with food spoilage, foodborne disease, and hospital-acquired infections. Understanding the impact of environmental conditions and decontamination techniques on the metabolic activity, viability, and biomarkers of these spores is crucial for combatting them. To distinguish and track spores and to understand metabolic mechanisms, spores must be labeled. Staining or genetic modification are current methods for this, however, these methods can be time-consuming, and affect the viability and function of spore samples. In this work, we investigate the use of heavy water for permanent isotope labeling of spores and Raman spectroscopy for tracking sporulation/germination mechanisms. We also discuss the potential of this method in observing decontamination. We find that steady-state deuterium levels in the spore are achieved after only ∼48 h of incubation with 30% D2O-infused broth and sporulation, generating Raman peaks at cell silent region of 2200 and 2300 cm-1. These deuterium levels then decrease rapidly upon spore germination in non-deuterated media. We further find that unlike live spores, spores inactivated using various methods do not lose these Raman peaks upon incubation in growth media, suggesting these peaks may be used to indicate the viability of a spore sample. We further observe several Raman peaks exclusive to deuterated DPA, a spore-specific chemical biomarker, at e.g. 988 and 2300 cm-1, which can be used to track underlying changes in spores involving DPA. In conclusion, permanent spore labeling using deuterium offers a robust and non-invasive way of labeling bacterial spores for marking, viability determination, and characterising spore activity.

Reconstituting Spore Cortex Peptidoglycan Biosynthesis Reveals a Deacetylase That Catalyzes Transamidation.

Some bacteria survive in nutrient-poor environments and resist killing by antimicrobials by forming spores. The cortex layer of the peptidoglycan cell wall that surrounds mature spores contains a unique modification, muramic-δ-lactam, that is essential for spore germination and outgrowth. Two proteins, the amidase CwlD and the deacetylase PdaA, are required for muramic-δ-lactam synthesis in cells, but their combined ability to generate muramic-δ-lactam has not been directly demonstrated. Here we report an in vitro reconstitution of cortex peptidoglycan biosynthesis, and we show that CwlD and PdaA together are sufficient for muramic-δ-lactam formation. Our method enables characterization of the individual reaction steps, and we show for the first time that PdaA has transamidase activity, catalyzing both the deacetylation of N-acetylmuramic acid and cyclization of the product to form muramic-δ-lactam. This activity is unique among peptidoglycan deacetylases and is notable because it may involve the direct ligation of a carboxylic acid with a primary amine. Our reconstitution products are nearly identical to the cortex peptidoglycan found in spores, and we expect that they will be useful substrates for future studies of enzymes that act on the spore cortex.

Catalytic Materials Enabled by a Programmable Assembly of Synthetic Polymers and Engineered Bacterial Spores.

Natural biological materials are formed by self-assembly processes and catalyze a myriad of reactions. Here, we report a programmable molecular assembly of designed synthetic polymers with engineered bacterial spores. This self-assembly process is driven by dynamic covalent bond formation on spore surface glycan and yields macroscopic materials that are structurally stable, self-healing, and recyclable. Molecular programming of polymer species shapes the physical properties of these materials while metabolically dormant spores allow for prolonged ambient storage. Incorporation of spores with genetically encoded functionalities enables operationally simple and repeated enzymatic catalysis. Our work combines molecular and genetic engineering to offer scalable and programmable synthesis of robust materials for sustainable biocatalysis.

Zirconium-Directed Supramolecular Self-Assembly of Coenzyme A@GNCs with Enhanced Phosphorescence for Developing Ultrasensitive Tracer Probe of Dipicolinic Acid, a Biomarker of Bacterial Spores.

Luminescent gold nanoclusters (GNCs) are a class of attractive quantum-sized nanomaterials bridging the gap between organogold complexes and gold nanocrystals. They typically have a core-shell structure consisting of a Au(I)-organoligand shell-encapsulated few-atom Au(0) core. Their luminescent properties are greatly affected by their Au(I)-organoligand shell, which also supports the aggregation-induced emission (AIE) effect. However, so far, the luminescent Au nanoclusters encapsulated with the organoligands containing phosphoryl moiety have rarely been reported, not to mention their AIE. In this study, coenzyme A (CoA), an adenosine diphosphate (ADP) analogue that is composed of a bulky 5-phosphoribonucleotide adenosine moiety connected to a long branch of vitamin B5 (pantetheine) via a diphosphate ester linkage and ubiquitous in all living organisms, has been used to synthesize phosphorescent GNCs for the first time. Interestingly, the synthesized phosphorescent CoA@GNCs could be further induced to generate AIE via the PO32- and Zr4+ interactions, and the observed AIE was found to be highly specific to Zr4+ ions. In addition, the enhanced phosphorescent emission could be quickly turned down by dipicolinic acid (DPA), a universal and specific component and also a biomarker of bacterial spores. Therefore, a Zr4+-CoA@GNCs-based DPA biosensor for quick, facile, and highly sensitive detection of possible spore contamination has been developed, showing a linear concentration range from 0.5 to 20 µM with a limit of detection of 10 nM. This study has demonstrated a promising future for various organic molecules containing phosphoryl moiety for the preparation of AIE-active metal nanoclusters.

Viable Clostridium botulinum spores not detected in the household dust of major Canadian cities.

Clostridium botulinum causes infant botulism by colonising the intestines and producing botulinum neurotoxin in situ. Previous reports have linked infant botulism cases to C. botulinum spores in household dust, yet the baseline incidence of C. botulinum spores in residential households is currently unknown. Vacuum cleaner dust from 963 households in 13 major Canadian cities was tested for C. botulinum using a novel real-time PCR assay directed against all known subtypes of the botulinum neurotoxin gene. None of the samples tested positive for C. botulinum. Analysis of a random subset of samples by MALDI Biotyper revealed that the most common anaerobic bacterial isolates were of the genus Clostridium and the most common species recovered overall was Clostridium perfringens. Dust that was spiked with C. botulinum spores of each toxin type successfully produced positive real-time PCR reactions. These control experiments indicate that this is a viable method for the detection of C. botulinum spores in household dust. We make several recommendations for future work that may help discover a common environmental source of C. botulinum spores that could lead to effective preventative measures for this rare but deadly childhood disease.

Dormant spores receive an unexpected wake-up call.

Germination of spores of Bacillus bacteria can be triggered by nutrients acting through receptors on the spore's inner membrane. Shah et al. (2008) now report that cell wall peptidoglycan fragments can also trigger spore germination by binding to an inner membrane-bound protein kinase.

A eukaryotic-like Ser/Thr kinase signals bacteria to exit dormancy in response to peptidoglycan fragments.

Bacteria can respond to adverse environmental conditions by drastically reducing or even ceasing metabolic activity. They must then determine that conditions have improved before exiting dormancy, and one indication of such a change is the growth of other bacteria in the local environment. Growing bacteria release muropeptide fragments of the cell wall into the extracellular milieu, and we report here that these muropeptides are potent germinants of dormant Bacillus subtilis spores. The ability of a muropeptide to act as a germinant is determined by the identity of a single amino acid. A well-conserved, eukaryotic-like Ser/Thr membrane kinase containing an extracellular domain capable of binding peptidoglycan is necessary for this response, and a small molecule that stimulates related eukaryotic kinases is sufficient to induce germination. Another small molecule, staurosporine, that inhibits related eukaryotic kinases blocks muropeptide-dependent germination. Thus, in contrast to traditional antimicrobials that inhibit metabolically active cells, staurosporine acts by blocking germination of dormant spores.

FtsZ phosphorylation pleiotropically affects Z-ladder formation, antibiotic production, and morphogenesis in Streptomyces coelicolor.

The GTPase FtsZ forms the cell division scaffold in bacteria, which mediates the recruitment of the other components of the divisome. Streptomycetes undergo two different forms of cell division. Septa without detectable peptidoglycan divide the highly compartmentalised young hyphae during early vegetative growth, and cross-walls are formed that dissect the hyphae into long multinucleoid compartments in the substrate mycelium, while ladders of septa are formed in the aerial hyphae that lead to chains of uninucleoid spores. In a previous study, we analysed the phosphoproteome of Streptomyces coelicolor and showed that FtsZ is phosphorylated at Ser 317 and Ser389. Substituting Ser-Ser for either Glu-Glu (mimicking phosphorylation) or Ala-Ala (mimicking non-phosphorylation) hinted at changes in antibiotic production. Here we analyse development, colony morphology, spore resistance, and antibiotic production in FtsZ knockout mutants expressing FtsZ alleles mimicking Ser319 and Ser387 phosphorylation and non-phosphorylation: AA (no phosphorylation), AE, EA (mixed), and EE (double phosphorylation). The FtsZ-eGFP AE, EA and EE alleles were not able to form observable FtsZ-eGFP ladders when they were expressed in the S. coelicolor wild-type strain, whereas the AA allele could form apparently normal eGFP Z-ladders. The FtsZ mutant expressing the FtsZ EE or EA or AE alleles is able to sporulate indicating that the mutant alleles are able to form functional Z-rings leading to sporulation when the wild-type FtsZ gene is absent. The four mutants were pleiotropically affected in colony morphogenesis, antibiotic production, substrate mycelium differentiation and sporulation (sporulation timing and spore resistance) which may be an indirect result of the effect in sporulation Z-ladder formation. Each mutant showed a distinctive phenotype in antibiotic production, single colony morphology, and sporulation (sporulation timing and spore resistance) indicating that the different FtsZ phosphomimetic alleles led to different phenotypes. Taken together, our data provide evidence for a pleiotropic effect of FtsZ phosphorylation in colony morphology, antibiotic production, and sporulation.

A new role for SR1 from Bacillus subtilis: regulation of sporulation by inhibition of kinA translation.

SR1 is a dual-function sRNA from Bacillus subtilis. It inhibits translation initiation of ahrC mRNA encoding the transcription activator of the arginine catabolic operons. Base-pairing is promoted by the RNA chaperone CsrA, which induces a slight structural change in the ahrC mRNA to facilitate SR1 binding. Additionally, SR1 encodes the small protein SR1P that interacts with glyceraldehyde-3P dehydrogenase A to promote binding to RNase J1 and enhancing J1 activity. Here, we describe a new target of SR1, kinA mRNA encoding the major histidine kinase of the sporulation phosphorelay. SR1 and kinA mRNA share 7 complementary regions. Base-pairing between SR1 and kinA mRNA decreases kinA translation without affecting kinA mRNA stability and represses transcription of the KinA/Spo0A downstream targets spoIIE, spoIIGA and cotA. The initial interaction between SR1 and kinA mRNA occurs 10 nt downstream of the kinA start codon and is decisive for inhibition. The sr1 encoded peptide SR1P is dispensable for kinA regulation. Deletion of sr1 accelerates sporulation resulting in low quality spores with reduced stress resistance and altered coat protein composition which can be compensated by sr1 overexpression. Neither CsrA nor Hfq influence sporulation or spore properties.

[Identification of Clinical Isolates of the Bacillus cereus Group and Their Characterization by Mass Spectrometry and Electron Microscopy].

Bacillus cereus is a spore-forming bacterium found in the environment mainly in soil. Bacillus spores are known to be extremely resistant not only to environmental factors, but also to various sanitation regimes. This leads to spore contamination of toxin-producing strains in hospital and food equipment and, therefore, poses a great threat to human health. Two clinical isolates identified as B. cereus and B. cytotoxicus were used in the present work. It was shown that their calcium ion content was significantly lower than that of the reference strains. According to electron microscopy, one of the SRCC 19/16 isolates has an enlarged exosporium, and the SRCC 1208 isolate has large electron-dense inclusions of an unclear nature during sporulation. We can assume that these contain a biologically active component with a cytotoxic effect and possibly play a role in pathogenesis. Comparative chemical, biochemical, physiological, and ultrastructural analysis of spores of clinical isolates and reference strains of B. cereus was performed. The results we obtained deepen our understanding of the properties of spores that contribute to the increased pathogenicity of B. cereus group species.

Rapid detection and quantitation of dipicolinic acid from Clostridium botulinum spores using mixed-mode liquid chromatography-tandem mass spectrometry.

Analysis of the dipicolinic acid (DPA) released from Clostridium botulinum spores during thermal processing is crucial to obtaining a mechanistic understanding of the factors involved in spore heat resistance and related food safety applications. Here, we developed a novel mixed-mode liquid chromatography-tandem mass spectrometry (LC-MS/MS) method for detection of the DPA released from C. botulinum type A, nonproteolytic types B and F strains, and nonpathogenic surrogate Clostridium sporogenes PA3679 spores. DPA was retained on a mixed-mode C18/anion exchange column and was detected using electrospray ionization (ESI) positive mode within a 4-min analysis time. The intraday and interday precision (%CV) was 1.94-3.46% and 4.04-8.28%, respectively. Matrix effects were minimal across proteolytic type A Giorgio-A, nonproteolytic types QC-B and 202-F, and C. sporogenes PA3679 spore suspensions (90.1-114% of spiked DPA concentrations). DPA recovery in carrot juice and beef broth ranged from 105 to 118%, indicating limited matrix effects of these food products. Experiments that assessed the DPA released from Giorgio-A spores over the course of a 5-min thermal treatment at 108 °C found a significant correlation (R = 0.907; P < 0.05) between the log reduction of spores and amount of DPA released. This mixed-mode LC-MS/MS method provides a means for rapid detection of DPA released from C. botulinum spores during thermal processing and has the potential to be used for experiments in the field of food safety that assess the thermal resistance characteristics of various C. botulinum spore types.

Spore-Associated Proteins Involved in c-di-GMP Synthesis and Degradation of Bacillus anthracis.

Bis-(3'-5')-cyclic-dimeric GMP (c-di-GMP) is an important bacterial regulatory signaling molecule affecting biofilm formation, toxin production, motility, and virulence. The genome of Bacillus anthracis, the causative agent of anthrax, is predicted to encode ten putative GGDEF/EAL/HD-GYP-domain containing proteins. Heterologous expression in Bacillus subtilis hosts indicated that there are five active GGDEF domain-containing proteins and four active EAL or HD-GYP domain-containing proteins. Using an mCherry gene fusion-Western blotting approach, the expression of the c-di-GMP-associated proteins was observed throughout the in vitro life cycle. Of the six c-di-GMP-associated proteins found to be present in sporulating cells, four (CdgA, CdgB, CdgD, and CdgG) contain active GGDEF domains. The six proteins expressed in sporulating cells are retained in spores in a CotE-independent manner and thus are not likely to be localized to the exosporium layer of the spores. Individual deletion mutations involving the nine GGDEF/EAL protein-encoding genes and one HD-GYP protein-encoding gene did not affect sporulation efficiency, the attachment of the exosporium glycoprotein BclA, or biofilm production. Notably, expression of anthrax toxin was not affected by deletion of any of the cdg determinants. Three determinants encoding proteins with active GGDEF domains were found to affect germination kinetics. This study reveals a spore association of cyclic-di-GMP regulatory proteins and a likely role for these proteins in the biology of the B. anthracis spore. IMPORTANCE The genus Bacillus is composed of Gram-positive, rod shaped, soil-dwelling bacteria. As a mechanism for survival in the harsh conditions in soil, the organisms undergo sporulation, and the resulting spores permit the organisms to survive harsh environmental conditions. Although most species are saprophytes, Bacillus cereus and Bacillus anthracis are human pathogens and Bacillus thuringiensis is an insect pathogen. The bacterial c-di-GMP regulatory system is an important control system affecting motility, biofilm formation, and toxin production. The role of c-di-GMP has been studied in the spore-forming bacilli Bacillus subtilis, Bacillus amyloliquefaciens, B. cereus, and B. thuringiensis. However, this regulatory system has not heretofore been examined in the high-consequence zoonotic pathogen of this genus, B. anthracis.

Characterization of Heterogeneity and Dynamics of Lysis of Single Bacillus subtilis Cells upon Prophage Induction During Spore Germination, Outgrowth, and Vegetative Growth Using Raman Tweezers and Live-Cell Phase-Contrast Microscopy.

A prophage comprises a bacteriophage genome that has integrated into a host bacterium's DNA, which generally permits the cell to grow and divide normally. However, the prophage can be induced by various stresses, or induction can occur spontaneously. After prophage induction, viral replication and production of endolysins begin until the cell lyses and phage particles are released. However, the heterogeneity of prophage induction and lysis of individual cells in a population and the dynamics of a cell undergoing lysis by prophage induction have not been fully characterized. Here, we used Raman tweezers and live-cell phase-contrast microscopy to characterize the Raman spectral and cell length changes that occur during the lysis of individual Bacillus subtilis cells from spores that carry PBSX prophage during spores' germination, outgrowth, and then vegetative growth. Major findings of this work are as follows: (i) After addition of xylose to trigger prophage induction, the intensities of Raman spectral bands associated with nucleic acids of single cells in induced cultures gradually fell to zero, in contrast to the much smaller changes in protein band intensities and no changes in nucleic acid bands in uninduced cultures; (ii) the nucleic acid band intensities from an individual induced cell exhibited a rapid decrease, following a long lag period; (iii) after the addition of nutrient-rich medium with xylose, single spores underwent a long period (228 ± 41.4 min) for germination, outgrowth, and vegetative growth, followed by a short period of cell burst in 1.5 ± 0.8 min at a cell length of 8.2 ± 5.5 µm; (iv) the latent time (Tlatent) between the addition of xylose and the start of cell burst was heterogeneous in cell populations; however, the period (ΔTburst) from the latent time to the completion of cell lysis was quite small; (v) in a poor medium with l-alanine alone, addition of xylose caused prophage induction following spore germination but with longer Tlatent and ΔTburst times and without cell elongation; (vi) spontaneous prophage induction and lysis of individual cells from spores in a minimal nutrient medium were observed without xylose addition, and cell length prior to cell lysis was ∼4.1 µm, but spontaneous prophage induction was not observed in a rich medium; (vii) in a rich medium, addition of xylose at a time well after spore germination and outgrowth significantly shortened the average Tlatent time. The results of this study provide new insights into the heterogeneity and dynamics of lysis of individual B. subtilis cells derived from spores upon prophage induction.

Quantification of endospores in ancient permafrost using time-resolved terbium luminescence.

We describe herein a simple procedure for quantifying endospore abundances in ancient and organic-rich permafrost. We repeatedly (10x) extracted and fractionated permafrost using a tandem filter assembly composed of 3 and 0.2 µm filters. Then, the 0.2 µm filter was washed (7x), autoclaved, and the contents eluted, including dipicolinic acid (DPA). Time-resolved luminescence using Tb(EDTA) yielded a LOD of 1.46 nM DPA (6.55 × 103 endospores/mL). In review, DPA/endospore abundances were ~2.2-fold greater in older 33 ky permafrost (258 ± 36 pmol DPA gdw-1; 1.15 × 106 ± 0.16 × 106 spores gdw-1) versus younger 19 ky permafrost (p = 0.007297). This suggests that dormancy increases with permafrost age.

Highly sensitive protein detection using recombinant spores and lateral flow immunoassay.

Lateral flow immunoassays (LFIs) can be used to detect intact bacteria or spores; when gold nanoparticles (AuNPs) are used as the signal reporters, the detection limits are very low. Spore-based surface display has been widely studied for enzyme immobilization and live-nontoxic oral vaccines. In this study, recombinant spores were used to improve the sensitivity of a LFI. We developed a test kit that combines streptavidin-displayed spores with a LFI assay for rapid protein detection. The recombinant spores served as a signal amplifier and AuNPs were used as the signal reporters. For detection of ß-galactosidase, which was used as the model protein, the detection limit was about 10-15 mol, while that of the conventional LFI is about 10-12 mol. In both methods, nanogold was used as the colorimetric signal and could be observed with the naked eye. This method improved LFI sensitivity without sacrificing its advantages. Furthermore, enhanced green fluorescent protein (eGFP) was also displayed on the surface of the streptavidin-displayed spores. Without AuNPs, the fluorescent recombinant spores acted as the signal, which could be detected by a fluorescence detector, such as a fluorescence microscope. The detection limit was 10-16 mol under fluorescence microscopy whose magnification was 25-fold. Therefore, in conclusion, in this proof of concept study, the detection limits of both proposed methods were far superior to those of traditional LFI assay.

Viability of bacterial spores surviving heat-treatment is lost by further incubation at temperature and pH not suitable for growth.

Spores from 21 strains from different genera were heat-treated and stored in different sets of process conditions (4 temperatures and 3 pH levels) defined to prevent growth. In these conditions, spores surviving the heat treatment progressively lost viability during storage. Different inactivation curve shapes (linear, shoulder and tailing) and different sensitivities to storage were observed. B. coagulans showed the fastest inactivation kinetics, with more than 4-log reduction of spore population within 24 h after heating and G. stearothermophilus displayed slower inactivation kinetics, whereas all the anaerobic strains studied (M. thermoacetica and Thermoanaerobacterium spp.) proved resistant to storage conditions, with no destruction detected during 90 days in most cases. Inactivation rates were relatively unaffected by sub-lethal pH but sharply accelerated by temperature: Inactivation became faster as temperature increased (in the 8 °C-55 °C temperature range), with growth blocked by low pH in sub-lethal temperatures. There were changes in surviving spore numbers after the heat-treatment phase. This has implications and applications in canned food industries, as the probability of a retorted sample testing as non-stable, meaning possible spoilage, may decrease with time. In simple terms, a batch of low-acid canned food that tests as non-shelf-stable after an incubation test i.e. positive growth conditions, may later become negative if stored at room temperature (below the minimal growth temperature for thermophilic spores), which may change the marketability of the batch.

Impact of shoulders on the calculus of heat sterilization treatments with different bacterial spores.

To date, heat is still the most used technology in food preservation. The calculus of heat treatments is usually based on Bigelow observations i.e. treatment time is an exponential function of the heat treatment temperature. However, a number of researchers have reported deviations from linearity in heat inactivation curves that caused errors in the calculus. This research was designed to evaluate the variability of shoulder length among different sporulated species, the impact of treatment temperature on these shoulders and the relationship between the traditional DT value and shoulder length. The heat inactivation kinetics of five bacterial spores of importance for the food industry was evaluated. B. weihenstephanensis and B. cereus did not show shoulders and DT values calculated ranged from 0.99 to 0.23 and from 1.33 to 0.56 respectively at temperatures from 100 to 102.5 °C. On the other side B. subtilis, B. licheniformis and G. stearothermophilus showed shoulders of 1.75-0.42, 1.92-0.43 and 3.22-0.78 and DT values of 1.52-0.32, 2.12-0.59 and 2.22-0.48 respectively in the range of temperatures tested. From the results obtained it was concluded that the presence and magnitude of shoulders depended on the bacterial spore species, the longest being those on the bacterial spores which showed greatest heat resistance. It has also been proved that shoulder lengths vary with treatment temperature in the same proportion of traditional DT values, with the relationship Sl/DT being constant. Thus, an equation which included the constant Sl/DT was proposed.

Gold nanocluster-europium(III) ratiometric fluorescence assay for dipicolinic acid.

A ratiometric fluorescence assay was designed for determination of dipicolinic acid (DPA), a spore-specific compound which is used as a biomarker for Bacillus anthracis spores for food and medical product safety analysis. The dual-channel fluorescence probe integrates two fluorescent materials, Eu3+ ion and gold nanocluster (Au NC). The Au NC is used as a reference channel to measure background noise and the Eu3+ ion as the DPA-specific response signal channel. The probe was prepared through simply combing bovine serum albumin (BSA)-scaffolded Eu3+ ion and Au NCs. When excited at 530 nm, in the presence of DPA, the fluorescence signals of Eu3+ ion at 595, 617, and 695 nm increased significantly while the 650 nm signal of Au NC reference remained relatively constant. This fluorescence probe has good photo-stability and also displays good selectivity and high sensitivity for DPA with a low detection limit of 0.8 µM. The linear range of the ratiometric probe for DPA is 1-50 µM. For determination of DPA released during the germination of Bacillus subtilis spores, the detection results were in agreement with measurements by conventional calorimetry assay. The method may have potential for measuring the level of contamination and germination by spores. Graphical Abstract Dual-channel fluorescence biosensor was designed to detect dipicolinic acid, a spore-specific compound which is used as a biomarker for Bacillus anthracis spores for food and medical product safety analysis.