Cell-free styrene biosynthesis at high titers.

Styrene is an important petroleum-derived molecule that is polymerized to make versatile plastics, including disposable silverware and foamed packaging materials. Finding more sustainable methods, such as biosynthesis, for producing styrene is essential due to the increasing severity of climate change as well as the limited supply of fossil fuels. Recent metabolic engineering efforts have enabled the biological production of styrene in Escherichia coli, but styrene toxicity and volatility limit biosynthesis in cells. To address these limitations, we have developed a cell-free styrene biosynthesis platform. The cell-free system provides an open reaction environment without cell viability constraints, which allows exquisite control over reaction conditions and greater carbon flux toward product formation rather than cell growth. The two biosynthetic enzymes required for styrene production were generated via cell-free protein synthesis and mixed in defined ratios with supplemented L-phenylalanine and buffer. By altering the time, temperature, pH, and enzyme concentrations in the reaction, this approach increased the cell-free titer of styrene from 5.36 ± 0.63 mM to 40.33 ± 1.03 mM, the highest amount achieved using biosynthesis without process modifications and product removal strategies. Cell-free systems offer a complimentary approach to cellular synthesis of small molecules, which can provide particular benefits for producing toxic molecules.

Site-Specific Antibody Functionalization Using Tetrazine-Styrene Cycloaddition.

Biologics, such as antibody-drug conjugates, are becoming mainstream therapeutics. Consequently, methods to functionalize biologics without disrupting their native properties are essential for identifying, characterizing, and translating candidate biologics from the bench to clinical practice. Here, we present a method for site-specific, carboxy-terminal modification of single-chain antibody fragments (scFvs). ScFvs displayed on the surface of yeast were isolated and functionalized by combining intein-mediated expressed protein ligation (EPL) with inverse electron-demand Diels-Alder (IEDDA) cycloaddition using a styrene-tetrazine pair. The high thiol concentration required to trigger EPL can hinder the subsequent chemoselective ligation reactions; therefore, the EPL reaction was used to append styrene to the scFv, limiting tetrazine exposure to damaging thiols. Subsequently, the styrene-functionalized scFv was reacted with tetrazine-conjugated compounds in an IEDDA cycloaddition to generate functionalized scFvs that retain their native binding activity. Rapid functionalization of yeast surface-derived scFv in a site-directed manner could find utility in many downstream laboratory and preclinical applications.

Synthesis and Computational Studies Demonstrate the Utility of an Intramolecular Styryl Diels-Alder Reaction and Di-t-butylhydroxytoluene Assisted [1,3]-Shift to Construct Anticancer dl-Deoxypodophyllotoxin.

Deoxypodophyllotoxin is a secondary metabolite lignan possessing potent anticancer activity with potential as a precursor for known anticancer drugs, but its use is limited by scarcity from natural sources. We here report the total synthesis of racemic deoxypodophyllotoxin in seven steps using an intramolecular styryl Diels-Alder reaction strategy uniquely suited to assemble the deoxypodophyllotoxin core. Density functional theory was used to analyze concerted, polar, and singlet-open-shell diradical reaction pathways, which identified a low-energy concerted [4 + 2] Diels-Alder pathway followed by a faster di-t-butylhydroxytoluene assisted [1,3]-formal hydrogen shift.

In Silico Tracking of Individual Species Accelerating Progress in Macromolecular Engineering and Design.

The beneficial use of computer simulations to track the microstructural evolution of individual species is highlighted in view of macromolecular engineering and design, considering two case studies on catalytic polymerization, and both "low" (<100) and "high" (>100) chain lengths, that is, i) atom transfer radical copolymerization of n-butyl acrylate and styrene aiming at the synthesis of functional macrospecies of "identical' chain length; and ii) chain shuttling polymerization of ethylene and 1-octene toward the production of segmented block copolymers with "soft" and "hard" segments. Model parameters are validated and/or tuned based on literature data. The modeling strategy supports the future identification of chemical structure-polymer property relationships and is based on the combination of principles from polymer reaction engineering, chemistry, and physics.

Improved Photoinduced Fluorogenic Alkene-Tetrazole Reaction for Protein Labeling.

The 1,3-dipolar cycloaddition reaction between an alkene and a tetrazole represents one elegant and rare example of fluorophore-forming bioorthogonal chemistry. This is an attractive reaction for imaging applications in live cells that requires less intensive washing steps and/or needs spatiotemporal resolutions. In the present work, as an effort to improve the fluorogenic property of the alkene-tetrazole reaction, an aromatic alkene (styrene) was investigated as the dipolarophile. Over 30-fold improvement in quantum yield of the reaction product was achieved in aqueous solution. According to our mechanistic studies, the observed improvement is likely due to an insufficient protonation of the styrene-tetrazole reaction product. This finding provides useful guidance to the future design of alkene-tetrazole reactions for biological studies. Fluorogenic protein labeling using the styrene-tetrazole reaction was demonstrated both in vitro and in vivo. This was realized by the genetic incorporation of an unnatural amino acid containing the styrene moiety. It is anticipated that the combination of styrene with different tetrazole derivatives can generally improve and broaden the application of alkene-tetrazole chemistry in real-time imaging in live cells.

Mechanism of Pd-Catalyzed Decarbonylation of Biomass-Derived Hydrocinnamic Acid to Styrene following Activation as an Anhydride.

All elementary steps in the mechanism of Pd-catalyzed decarbonylation of hydrocinnamic acid through formation of a mixed anhydride species have been characterized through electronic structure calculations. Oxidative addition of the mixed anhydride to a singly or doubly ligated Pd is followed by decarbonylation, alkene formation, and catalyst regeneration. Metal-assisted deprotonation of the alkyl-Pd species by a coordinated carboxylate is predicted to be the rate-determining step; theory suggests that bulkier phosphine ligands (e.g., P(o-Tol)3) reduce the free energy of activation substantially, while variation of the auxiliary anhydride has little influence on efficiency.

Borane-catalyzed metal-free hydrogenation of 2,7-disubstituted 1,8-naphthyridines.

Metal-free hydrogenation of 2,7-disubstituted 1,8-naphthyridines was successfully realized for the first time using in situ generated borane catalysts under mild conditions to furnish 1,2,3,4-tetrahydro-1,8-naphthyridine derivatives in 83-98% yields. Significantly, up to 74% ee was achieved for the corresponding asymmetric hydrogenation reactions.

Manganese-Catalyzed Aerobic Oxytrifluoromethylation of Styrene Derivatives Using CF3SO2Na as the Trifluoromethyl Source.

A mild and practical protocol for manganese-catalyzed aerobic oxytrifluoromethylation of olefinic bonds of styrene derivatives using CF3SO2Na (Langlois' reagent) as the CF3 source is described. A distinguishing feature of this method is the generation of trifluoromethyl radicals from CF3SO2Na using the simple manganese salt/O2 system. The reaction proceeds under ambient conditions, free of added peroxide initiators, and provides moderate to good selectivities for alcohol versus ketone product.

Palladium-catalyzed vinylation of aminals with simple alkenes: a new strategy to construct allylamines.

A novel, highly selective palladium-catalyzed vinylation reaction for the direct synthesis of allylic amines from styrenes and aminals has been established. The utility of this method was also demonstrated by the rapid synthesis of cinnarizine from aldehydes, amines, and simple alkenes in one-pot manner. Mechanistic studies suggested that the reaction proceeds through a valuable cyclometalated Pd(II) complex generated by the oxidative addition of aminal to a Pd(0) species.

Iron-catalyzed, highly regioselective synthesis of α-aryl carboxylic acids from styrene derivatives and CO2.

The iron-catalyzed hydrocarboxylation of aryl alkenes has been developed using a highly active bench-stable iron(II) precatalyst to give α-aryl carboxylic acids in excellent yields and with near-perfect regioselectivity. Using just 1 mol % FeCl(2), bis(imino)pyridine 6 (1 mol %), CO(2) (atmospheric pressure), and a hydride source (EtMgBr, 1.2 equiv), a range of sterically and electronically differentiated aryl alkenes were transformed to the corresponding α-aryl carboxylic acids (up to 96% isolated yield). The catalyst was found to be equally active with a loading of 0.1 mol %. Preliminary mechanistic investigations show that an iron-catalyzed hydrometalation is followed by transmetalation and reaction with the electrophile (CO(2)).

Synthesis and photophysical properties of a series of cyclopenta[b]naphthalene solvatochromic fluorophores.

The synthesis and photophysical properties of a series of naphthalene-containing solvatochromic fluorophores are described within. These novel fluorophores are prepared using a microwave-assisted dehydrogenative Diels-Alder reaction of styrene, followed by a palladium-catalyzed cross coupling reaction to install an electron donating amine group. The new fluorophores are structurally related to Prodan. Photophysical properties of the new fluorophores were studied and intriguing solvatochromic behavior was observed. For most of these fluorophores, high quantum yields (60-99%) were observed in methylene chloride in addition to large Stokes shifts (95-226 nm) in this same solvent. As the solvent polarity increased, so did the observed Stokes shift with one derivative displaying a Stokes shift of ~300 nm in ethanol. All fluorophore emission maxima, and nearly all absorption maxima were significantly red-shifted when compared to Prodan. Shifting the absorption and emission maxima of a fluorophore into the visible region increases its utility in biological applications. Moreover, the cyclopentane portion of the fluorophore structure provides an attachment point for biomolecules that will minimize disruptions of the photophysical properties.

Hydrogel particles as a particulate stabilizer for dispersion polymerization.

Hydrogel particles composed of poly(N-isopropylacrylamide) were used as a particulate steric stabilizer for the dispersion polymerization of styrene for the first time. The effects of the size and concentration of the hydrogel particles on the resultant polystyrene particles were investigated. As expected, the hydrogel particles indeed play the role of steric stabilizer for dispersion polymerization. Moreover, some of the resultant polystyrene particles were covered with hydrogel particles, which was confirmed by electron microscopy and X-ray photoelectron spectroscopy.

Tandem one-pot synthesis of flavans by recyclable silica-HClO4 catalyzed Knoevenagel condensation and [4 + 2]-Diels-Alder cycloaddition.

An efficient one-pot multi-component synthesis of flavans using perchloric acid supported on silica as a recyclable heterogeneous catalyst has been described. This is the first report of direct one-step construction of a flavan skeleton from a phenolic precursor. The method involves a Knoevenagel-type condensation leading to in situ formation of transient O-quinone methide which further undergoes [4 + 2]-Diels-Alder cycloaddition with styrene to yield a flavan skeleton. The method provides easy access to a wide range of bio-active natural products viz. flavonoids, anthocyanins and catechins.

A comprehensive investigation on the cooperative branch effect on the optical properties of novel conjugated compounds.

This paper presents a variety of conjugated derivatives with different number of arms (4-styryl-triphenylamine: C1, 4,4'-di-styryltriphenylamine: C2, 4,4',4″-tri-styryltriphenylamine: C3). The linear absorption and fluorescence maxima and the molar extinction coefficients are in the order of C1

Synthesis of Michael Adducts as Key Building Blocks for Potential Analgesic Drugs: In vitro, in vivo and in silico Explorations.

BACKGROUND: Organocatalytic asymmetric Michael addition is a strong approach for C-C bond formation. The objective of the study is to design molecules by exploiting the efficiency of Michael Adducts. We proceeded with the synthesis of Michael adducts by tailoring the substitution pattern on maleimide and trans-ß-nitro styrene as Michael acceptors. The synthesized compounds were evaluated for dual cyclooxygenases (COX) and lipoxygenase (LOX) inhibition. METHODS: The compounds (4, 9-11) were synthesized through Michael additions. The cyclooxygenases (COX-1 and 2) and lipoxygenase (5-LOX) assays were used for in vitro evaluations of compounds. After the acute toxicity studies, the in vivo analgesic potential was determined with acetic acid induced writhing, tail immersion, and formalin tests. Furthermore, the possible roles of adrenergic and dopaminergic receptors were also studied. Extensive computational studies were performed to get a better understanding regarding the binding of this compound with protein target. RESULTS: Four Michael adducts (4, 9-11) were synthesized. Compound 4 was obtained in enantio- and diastereopure form. The stereopure compound 4 showed encouraging COX-1 and-2 inhibitions with IC50 values of 128 and 65 µM with SI of 1.94. Benzyl derivative 11 showed excellent COX-2 inhibition with the IC50 value of 5.79 µM and SI value 7.96. Compounds 4 and 11 showed good results in in vivo models of analgesia like acetic acid test, tail immersion, and formalin tests. Our compounds were not active in dopaminergic and adrenergic pathways and so were acting centrally. Through extensive computational studies, we computed binding energies, and pharmacokinetic predictions. CONCLUSION: Our findings conclude that our synthesized Michael products (pyrrolidinedione 4 and nitroalkane 11) can be potent centrally acting analgesics. Our in silico predictions suggested that the compounds have excellent pharmacokinetic properties. It is concluded here that dual inhibition of COX/LOX pathways provides a convincing step towards the discovery of safe lead analgesic molecules.

Preparation of novel polypyridyl ruthenium complex polymers with high sensitivity for electrogenerated chemiluminescence via copolymerization.

We report two novel monomers, Ru1mono with one vinyl group, 4-[(4-vinylbenzylformamidyl)-4'-carboxylacid-2,2'-bipyridyl]-bis[2,2'-bipyridyl] ruthenium(II) perchlorate and Ru2mono with two vinyl groups, 4,4'-bis[(4-vinylbenzylformamidyl)-2,2'-bipyridyl]-bis[2,2'-bipyridyl] ruthenium(II) perchlorate. The molecular structures were demonstrated by NMR, mass spectrometry and elemental analysis. Polymers Ru1MVP and Ru2MVP were then co-polymerized under free radical polymerization from Ru1mono or Ru2mono and 4-vinylpyridine with the molar ratio of 9:1, respectively. Electrogenerated chemiluminescence (ECL) of Ru1MVP in a thin film on an electrode has been tested. It increased 17 times relative to cis-[Ru(bpy)(2)PVP(10)](ClO(4))(2) (RuPVP) reported in the presence of co-reactant tri-n-propylamine (TPA) at the oxidative peak around 1.16 V with scan rate of 100 mV s(-1). Relative to RuPVP ECL of Ru2MVP was 110 times greater with TPA, and 40 times greater with another co-reactant, sodium oxalate. The significant enhancement of ECL and improvement in making a stable film could be expected to lead to an applicable immobilized immunoassay technology via ECL.

MgO encapsulated mesoporous zeolite for the side chain alkylation of toluene with methanol.

Side chain alkylation of toluene with methanol was studied over mesoporous zeolite supported MgO catalysts. MgO were supported onto the carbon templated mesoporous silicalite-1 by direct synthesis route under microwave conditions. This direct synthesis route yields the majority of MgO highly dispersed into the mesopores of the silicalite-1 crystals. The vapor phase alkylation of toluene with methanol was performed over these catalysts under vapor phase conditions at atmospheric pressure. Mesoporous silicalite-1 supported MgO catalysts gave improved yields towards side chain alkylated products compared to the bulk MgO. The higher activity exhibited by 5% MgO supported on mesoporous silicalite compared to the one with 1% MgO can be attributed to the large number of weak basic sites observed from the CO2 TPD.

Two-dimensional Raman correlation spectroscopy study of an emulsion copolymerization reaction process.

The emulsion copolymerization of styrene and 1,3-butadiene using an oligomeric nonionic surfactant as an emulsifier to make a styrene-butadiene rubber (SBR) copolymer latex was monitored by real-time in situ Raman spectroscopy. Time-resolved Raman spectra collected during the early stage of the polymerization reaction were subjected to a series of data analysis techniques, including two-dimensional (2D) correlation spectroscopy, multivariate self-modeling curve resolution (SMCR), and kernel analysis, to elucidate the fine details of the complex reaction process. Generalized 2D correlation analysis of time-resolved Raman spectra readily identified the characteristic Raman scattering bands for the monomers and copolymer. Cross-peaks appearing in 2D Raman correlation spectra showed that the decrease in the spectral intensity of Raman bands assignable to 1,3-butadiene occurs before the band intensity changes for styrene or SBR copolymer. The positions of asynchronous cross-peaks were used to identify a spectral region with the most distinct pattern of intensity variations, which in turn could be used as the starting point for the alternating least squares iteration of the SMCR analysis. SMCR analysis of the time-resolved Raman spectra generated a set of estimated pure component spectra and concentration profiles of styrene, 1,3-butadiene, and SBR copolymer without requiring independently measured calibration data. The estimated concentration profiles of monomers and copolymer indicated that the reaction of 1,3-butadiene started before the consumption of styrene and production of SBR copolymer. Kernel analysis of the estimated concentration profiles provided a succinct measure of the similarity and dissimilarity of the concentration changes of monomers and copolymer.

A microfluidic platform for integrated synthesis and dynamic light scattering measurement of block copolymer micelles.

Microfluidic devices were developed that integrate the synthesis of well defined block copolymers and dynamic light scattering (DLS) measurement of their micelle formation. These metal devices were designed to operate in contact with organic solvents and elevated temperatures for long periods, and thus were capable of continuous in-channel atom transfer radical polymerization (ATRP) of styrene and (meth)acrylate homopolymers and block copolymers. These devices were equipped with a miniaturized fiber optic DLS probe that included several technology improvements, including a measurement volume of only 4 microlitres, simple alignment, and reduced multiple scattering. To demonstrate the integrated measurement, poly(methyl methacrylate-b-lauryl methacrylate) and poly(methyl methacrylate-b-octadecyl methacrylate) block copolymers were processed on the device with a selective solvent, dodecane, to induce micelle formation. The in situ DLS measurements yielded the size and aggregation behavior of the micelles. For example, the block copolymer solutions formed discrete micelles (D(H) approximately = 25 nm) when the corona block was sufficiently long (f(MMA) < 0.51), but the micelles aggregated when this block was short. This study demonstrates the utility of these new devices for screening the solution behavior of custom synthesized polymeric surfactants and additives.

Self-assembling Properties of an N-Heterocyclic Carbene-based Metallosurfactant: Pd-Coordination Induced Formation of Reactive Interfaces in Water.

In this study, an N-heterocyclic carbene (NHC)-based metallosurfactant (MS), NHC-PdMS, was synthesized, where Pd(II) was bound to the NHC framework via a robust Pd-carbene bond with NEt3 as a co-ligand. Surface tension measurements revealed that the critical micelle concentration (CMC) of NHC-PdMS (1.8×10-4 M) was one order of magnitude lower than that of its MS precursor (imidazolium bromide). Coordination of the MS precursor and NEt3 to Pd(II) also influenced micelle size; the hydrodynamic diameters of NHC-PdMS and the MS precursor were observed to be 25.8±5.6 nm and 2.5±0.3 nm, respectively. Furthermore, small angle X-ray scattering measurements indicated that NHC-PdMS exhibited liquid crystalline behavior above 26 wt%, with a spacing ratio of 1:2:3 for the first, second, and third Bragg peaks. To understand the role of the reactive interface, NHC-PdMS was also applied to aqueous catalytic reactions. Owing to its low CMC value, a catalytic amount of NHC-PdMS (3 mol%) provided the reactive interface, which facilitated the aqueous Mizoroki-Heck reaction of various aryl iodides and styrene in good yields (72-95%). These results suggest that MS formation results in a drastic change in selfassembling properties, which are important for the development of highly reactive chemical interfaces in water.