Discovery of Multiple Light-Harvesting States of the Photosynthetic Protein PE545.

Cryptophytes are photosynthetic microalga that flourish in a remarkable diversity of natural environments by using pigment-containing proteins with absorption maxima tuned to each ecological niche. While this diversity in the absorption has been well established, the subsequent photophysics is highly sensitive to the local protein environment and so may exhibit similar variation. Thermal fluctuations of the protein conformation are expected to introduce photophysical heterogeneity of the pigments that may have evolved important functional properties in a manner similar to that of the absorption. However, such heterogeneity is averaged out in ensemble measurements and, therefore, has not yet been probed. Here, we report single-molecule measurements of phycoerythrin 545 (PE545), the prototypical cryptophyte antenna protein, in its native dimeric form. A conformational ensemble was resolved consisting of distinct photophysical states with different light-harvesting properties. Proteins that did not quench, partially quenched, or fully quenched absorbed light were observed. Light intensity increased the quenched-state population of the dimer, potentially as a mechanism to deal with the extreme light intensities found in aqueous environments. Cross-linking, which mimics local interactions, introduces this light-dependent functionality while also suppressing other conformational dynamics. The cellular organization can, therefore, actively modulate the protein conformation and dynamics, selecting for distinct levels of light harvesting. Thus, the complex conformational equilibrium provides an additional mechanism for cryptophytes and likely other photosynthetic organisms to optimize solar energy capture and conversion.

Size and fluorescence calibrated imaging flow cytometry: From arbitrary to standard units.

Imaging flow cytometry (IFCM) is a technique that can detect, size, and phenotype extracellular vesicles (EVs) at high throughput (thousands/minute) in complex biofluids without prior EV isolation. However, the generated signals are expressed in arbitrary units, which hinders data interpretation and comparison of measurement results between instruments and institutes. While fluorescence calibration can be readily achieved, calibration of side scatter (SSC) signals presents an ongoing challenge for IFCM. Here, we present an approach to relate the SSC signals to particle size for IFCM, and perform a comparability study between three different IFCMs using a plasma EV test sample (PEVTES). SSC signals for different sizes of polystyrene (PS) and hollow organosilica beads (HOBs) were acquired with a 405 nm 120 mW laser without a notch filter before detection. Mie theory was applied to relate scatter signals to particle size. Fluorescence calibration was accomplished with 2 µm phycoerythrin (PE) and allophycocyanin (APC) MESF beads. Size and fluorescence calibration was performed for three IFCMs in two laboratories. CD235a-PE and CD61-APC stained PEVTES were used as EV-containing samples. EV concentrations were compared between instruments within a size range of 100-1000 nm and a fluorescence intensity range of 3-10,000 MESF. 81 nm PS beads could be readily discerned from background based on their SSC signals. Fitting of the obtained PS bead SSC signals with Mie theory resulted in a coefficient of determination >0.99 between theory and data for all three IFCMs. 216 nm HOBs were detected with all instruments, and confirmed the sensitivity to detect EVs by SSC. The lower limit of detection regarding EV-size for this study was determined to be ~100 nm for all instruments. Size and fluorescence calibration of IFCM data increased cross-instrument data comparability with the coefficient of variation decreasing from 33% to 21%. Here we demonstrate - for the first time - scatter calibration of an IFCM using the 405 nm laser. The quality of the scatter-to-diameter relation and scatter sensitivity of the IFCMs are similar to the most sensitive commercially available flow cytometers. This development will support the reliability of EV research with IFCM by providing robust standardization and reproducibility, which are pre-requisites for understanding the biological significance of EVs.

Purified Pyropia yezoensis Pigment Extract-Based Tandem Dye Synthesis.

Red phycoerythrin (R-PE) is a highly valuable protein found in an edible seaweed, Pyropia yezoensis. It is used extensively in biotechnological applications due to its strong fluorescence and stability in diverse environments. However, the current methods for extracting and purifying R-PE are costly and unsustainable. The aim of the present study was to enhance the financial viability of the process by improving the extraction and purification of R-PE from dried P. yezoensis and to further enhance R-PE value by incorporating it into a tandem dye for molecular biology applications. A combination of ultrafiltration, ion exchange chromatography, and gel filtration yielded concentrated (1 mg·mL-1) R-PE at 99% purity. Using purified PE and Cyanine5 (Cy5), an organic tandem dye, phycoerythrin-Cy5 (PE-Cy5), was subsequently established. In comparison to a commercially available tandem dye, PE-Cy5 exhibited 202.3% stronger fluorescence, rendering it suitable for imaging and analyzes that require high sensitivity, enhanced signal-to-noise ratio, broad dynamic range, or shorter exposure times to minimize potential damage to samples. The techno-economic analysis confirmed the financial feasibility of the innovative technique for the extraction and purification of R-PE and PE-Cy5 production.

Three-phase partitioning, a recyclable method for the purification of R-phycoerythrin from a red algae Porphyra yezoensis.

In this study, R-phycoerythrin (R-PE) was isolated and characterized from Porphyra yezoensis by three-phase partitioning (TPP) method. The effects of temperature, time, pH, salt saturation, and volume ratio on the purity and recovery rate of R-PE were studied. The optimum extraction conditions were determined as follows: salt saturation of 70%, temperature of 25 °C, time of 45 min, pH of 7.0, and volume ratio of 1:1. Under the optimal extraction conditions, the purity of R-PE was 3.90. The results of SDS-PAGE showed that R-PE has three bands at 23 kDa, 22 kDa, and 18 kDa, corresponding to its α, ß, γ subunits. The structure and optical activity of R-PE did not change before and after purification based on ultraviolet, infrared, and fluorescence spectra. In addition, the purity and recovery rate of R-PE extracted by tert-butanol were evaluated. The results showed that the extraction performance of tert-butanol for R-PE remained unchanged in three recoveries. These show that TPP is an efficient, green, and recyclable extraction technology.

MpeV is a lyase isomerase that ligates a doubly linked phycourobilin on the ß-subunit of phycoerythrin I and II in marine Synechococcus.

Synechococcus cyanobacteria are widespread in the marine environment, as the extensive pigment diversity within their light-harvesting phycobilisomes enables them to utilize various wavelengths of light for photosynthesis. The phycobilisomes of Synechococcus sp. RS9916 contain two forms of the protein phycoerythrin (PEI and PEII), each binding two chromophores, green-light absorbing phycoerythrobilin and blue-light absorbing phycourobilin. These chromophores are ligated to specific cysteines via bilin lyases, and some of these enzymes, called lyase isomerases, attach phycoerythrobilin and simultaneously isomerize it to phycourobilin. MpeV is a putative lyase isomerase whose role in PEI and PEII biosynthesis is not clear. We examined MpeV in RS9916 using recombinant protein expression, absorbance spectroscopy, and tandem mass spectrometry. Our results show that MpeV is the lyase isomerase that covalently attaches a doubly linked phycourobilin to two cysteine residues (C50, C61) on the ß-subunit of both PEI (CpeB) and PEII (MpeB). MpeV activity requires that CpeB or MpeB is first chromophorylated by the lyase CpeS (which adds phycoerythrobilin to C82). Its activity is further enhanced by CpeZ (a homolog of a chaperone-like protein first characterized in Fremyella diplosiphon). MpeV showed no detectable activity on the α-subunits of PEI or PEII. The mechanism by which MpeV links the A and D rings of phycourobilin to C50 and C61 of CpeB was also explored using site-directed mutants, revealing that linkage at the A ring to C50 is a critical step in chromophore attachment, isomerization, and stability. These data provide novel insights into ß-PE biosynthesis and advance our understanding of the mechanisms guiding lyase isomerases.

A Review on a Hidden Gem: Phycoerythrin from Blue-Green Algae.

Phycoerythrin (PE) is a pink/red-colored pigment found in rhodophytes, cryptophytes, and blue-green algae (cyanobacteria). The interest in PE is emerging from its role in delivering health benefits. Unfortunately, the current cyanobacterial-PE (C-PE) knowledge is still in the infant stage. It is essential to acquire a more comprehensive understanding of C-PE. This study aimed to review the C-PE structure, up and downstream processes of C-PE, application of C-PE, and strategies to enhance its stability and market value. In addition, this study also presented a strengths, weaknesses, opportunities, and threats (SWOT) analysis on C-PE. Cyanobacteria appeared to be the more promising PE producers compared to rhodophytes, cryptophytes, and macroalgae. Green/blue light is preferred to accumulate higher PE content in cyanobacteria. Currently, the prominent C-PE extraction method is repeated freezing-thawing. A combination of precipitation and chromatography approaches is proposed to obtain greater purity of C-PE. C-PE has been widely exploited in various fields, such as nutraceuticals, pharmaceuticals, therapeutics, cosmetics, biotechnology, food, and feed, owing to its bioactivities and fluorescent properties. This review provides insight into the state-of-art nature of C-PE and advances a step further in commercializing this prospective pigment.

C-phycoerythrin from Phormidium persicinum Prevents Acute Kidney Injury by Attenuating Oxidative and Endoplasmic Reticulum Stress.

C-phycoerythrin (C-PE) is a phycobiliprotein that prevents oxidative stress and cell damage. The aim of this study was to evaluate whether C-PE also counteracts endoplasmic reticulum (ER) stress as a mechanism contributing to its nephroprotective activity. After C-PE was purified from Phormidium persicinum by using size exclusion chromatography, it was characterized by spectrometry and fluorometry. A mouse model of HgCl2-induced acute kidney injury (AKI) was used to assess the effect of C-PE treatment (at 25, 50, or 100 mg/kg of body weight) on oxidative stress, the redox environment, and renal damage. ER stress was examined with the same model and C-PE treatment at 100 mg/kg. C-PE diminished oxidative stress and cell damage in a dose-dependent manner by impeding the decrease in expression of nephrin and podocin normally caused by mercury intoxication. It reduced ER stress by preventing the activation of the inositol-requiring enzyme-1α (IRE1α) pathway and avoiding caspase-mediated cell death, while leaving the expression of protein kinase RNA-like ER kinase (PERK) and activating transcription factor 6α (ATF6α) pathways unmodified. Hence, C-PE exhibited a nephroprotective effect on HgCl2-induced AKI by reducing oxidative stress and ER stress.

Using a B-Phycoerythrin Extract as a Natural Colorant: Application in Milk-Based Products.

Nowadays, there is a growing interest in finding new coloring molecules of natural origin that can increase and diversify the offer of natural food dyes already present in the market. In the present work, a B-phycoerythrin extract from the microalgae Porphyridium cruentum was tested as a food colorant in milk-based products. Using spectroscopy and colorimetry, the extract was characterized and gave evidence of good properties and good stability in the pH range between 4.0 and 9.0. Coloring studies were conducted to demonstrate that samples carrying the pink extract could be used for simulating the pink color of marketed milk-based products. The staining factors, representing the amount of pink protein to be added to reproduce the color of strawberry commercial products, ranged between 1.6 mg/L and 49.5 mg/L, being sufficiently low in all samples. Additionally, color stability during a short period of cold storage was studied: it demonstrated that the three tested types of dairy products remained stable throughout the 11-day analysis period with no significant changes. These results prove the potential of the B-phycoerythrin extract as a natural colorant and alternative ingredient to synthetic coloring molecules.

Extraction and Purification of R-Phycoerythrin Alpha Subunit from the Marine Red Algae Pyropia Yezoensis and Its Biological Activities.

Phycoerythrin is a major light-harvesting pigment of red algae and cyanobacteria that is widely used as a fluorescent probe or as a colorant in the food and cosmetic industries. In this study, phycoerythrin was extracted from the red algae Pyropia yezoensis and purified by ammonium sulfate precipitation and various chromatography methods. The purified phycoerythrin was analyzed by UV-visible and fluorescence spectroscopy. The isolated pigment had the typical spectrum of R-phycoerythrin, with a trimmer state with absorbance maxima at 497, 536, and 565 nm. It was further purified and identified by LC-MS/MS and Mascot search. It showed a 100% sequence similarity with the R-phycoerythrin alpha subunit of Pyropia yezoensis. The molecular mass was 17.97 kDa. The antioxidant activity of the purified R-phycoerythrin alpha subunit was analyzed. It showed significant antioxidant activity in ABTS and FRAP assays and had significant cytotoxicity against HepG2 cells.

CpeF is the bilin lyase that ligates the doubly linked phycoerythrobilin on ß-phycoerythrin in the cyanobacterium Fremyella diplosiphon.

Phycoerythrin (PE) is a green light-absorbing protein present in the light-harvesting complex of cyanobacteria and red algae. The spectral characteristics of PE are due to its prosthetic groups, or phycoerythrobilins (PEBs), that are covalently attached to the protein chain by specific bilin lyases. Only two PE lyases have been identified and characterized so far, and the other bilin lyases are unknown. Here, using in silico analyses, markerless deletion, biochemical assays with purified and recombinant proteins, and site-directed mutagenesis, we examined the role of a putative lyase-encoding gene, cpeF, in the cyanobacterium Fremyella diplosiphon. Analyzing the phenotype of the cpeF deletion, we found that cpeF is required for proper PE biogenesis, specifically for ligation of the doubly linked PEB to Cys-48/Cys-59 residues of the CpeB subunit of PE. We also show that in a heterologous host, CpeF can attach PEB to Cys-48/Cys-59 of CpeB, but only in the presence of the chaperone-like protein CpeZ. Additionally, we report that CpeF likely ligates the A ring of PEB to Cys-48 prior to the attachment of the D ring to Cys-59. We conclude that CpeF is the bilin lyase responsible for attachment of the doubly ligated PEB to Cys-48/Cys-59 of CpeB and together with other specific bilin lyases contributes to the post-translational modification and assembly of PE into mature light-harvesting complexes.

Biogenic iron-silver nanoparticles inhibit bacterial biofilm formation due to Ag+ release as determined by a novel phycoerythrin-based assay.

Silver nanoparticles (Ag-NPs) can be considered as a cost-effective alternative to antibiotics. In the presence of Fe(III)-citrate and Ag+, Klebsiella oxytoca DSM 29614 produces biogenic Ag-NPs embedded in its peculiar exopolysaccharide (EPS). K. oxytoca DSM 29614 was cultivated in a defined growth medium-containing citrate (as sole carbon source) and supplemented with Ag+ and either low or high Fe(III) concentration. As inferred from elemental analysis, transmission and scanning electron microscopy, Fourier transform infrared spectrometry and dynamic light scattering, Ag-EPS NPs were produced in both conditions and contained also Fe. The production yield of high-Fe/Ag-EPS NPs was 12 times higher than the production yield of low-Fe/Ag-EPS NPs, confirming the stimulatory effect of iron. However, relative Ag content and Ag+ ion release were higher in low-Fe/Ag-EPS NPs than in high-Fe/Ag-EPS NPs, as revealed by emission-excitation spectra by luminescent spectrometry using a novel ad hoc established phycoerythrin fluorescence-based assay. Interestingly, high and low-Fe/Ag-EPS NPs showed different and growth medium-dependent minimal inhibitory concentrations against Staphylococcus aureus ATCC 29213 and Pseudomonas aeruginosa ATCC 15442. In addition, low-Fe/Ag-EPS NPs exert inhibition of staphylococcal and pseudomonal biofilm formation, while high-Fe/Ag-EPS NPs inhibits staphylococcal biofilm formation only. Altogether, these results, highlighting the different capability of Ag+ release, support the idea that Fe/Ag-EPS NPs produced by K. oxytoca DSM 29614 can be considered as promising candidates in the development of specific antibacterial and anti-biofilm agents.Key points • Klebsiella oxytoca DSM 29614 produces bimetal nanoparticles containing Fe and Ag.• Fe concentration in growth medium affects nanoparticle yield and composition.• Phycoerythrin fluorescence-based assay was developed to determine Ag+release.• Antimicrobial efficacy of bimetal nanoparticle parallels Ag+ions release.

Reproducing the low-temperature excitation energy transfer dynamics of phycoerythrin 545 light-harvesting complex with a structure-based model Hamiltonian.

To elucidate the energy transfer mechanism of the PE545 light-harvesting complex, an exciton model is constructed with the full Hamiltonian obtained from structure-based calculations. The electronic couplings and spectral densities are evaluated on the basis of the site energies and transition dipole moments obtained from our recent Molecular Dynamics-Quantum Mechanical/Molecular Mechanical (MD-QM/MM) study [Tong et al., J. Phys. Chem. B 123, 2040-2049 (2019)]. The polarized protein-specific charge model is employed both in the MD simulation and in the QM/MM calculations to account for the environmental fluctuation of the protein scaffold. The energy transfer pathways are, thus, derived, which agree well with the phenomenological models based on the spatial organization of the chromophores and the experimental observations. Moreover, the simulated linear absorption spectra using the dissipaton equation of motion approach agree well with the experimental ones, and the resulting population dynamics indicates that an optimal energy transfer efficiency is reproduced.

Induced cultivation pattern enhanced the phycoerythrin production in red alga Porphyridium purpureum.

Porphyridium purpureum is a rich source for producing phycoerythrin (PE); however, the PE content is greatly affected by culture conditions. Researchers have aimed to optimize the cultivation of P. purpureum for accumulation of PE. When traditional optimized culture conditions were used to cultivate P. purpureum, high PE contents were not usually achieved. In this study, an induced cultivation pattern was applied to P. purpureum for PE biosynthesis (i.e., an incremental approach by altering temperatures, light intensities, and nitrate concentrations). Results revealed that the induced pattern greatly improved the PE biosynthesis. The optimized PE content of 229 mg/L was achieved on the 12th cultivation day, which was a maximum PE content within one cultivation period and accounted for approximately 3.05% of the dry biomass. The induced cultivation pattern was highly suitable for PE synthesis in P. purpureum, which provided an important reference value to the large-scale production of PE.

Encapsulation of biomacromolecules by soaking and co-crystallization into porous protein crystals of hemocyanin.

Encapsulation of guest molecules into the hollow spaces of crystals has been applied for a variety of purposes such as structure determination, separation, and catalysis of the guest. Although host-guest studies have been developed mainly in crystals of small molecules, those of biomacromolecules have recently been applied. In those reports, a huge hollow space in the protein crystal is commonly used for encapsulation of the guest. Our previous study revealed that cylindrical hemocyanins stack inside the crystal as a linear hollow structure. The diameter of the linear hollow is approximately 110 Å, which is large enough for most proteins to pass through. In the present study, we evaluated the potential of hemocyanin crystals as a host to encapsulate biomacromolecules. Confocal microscopy revealed that hemocyanin crystals encapsulate proteins of molecular mass up to 250 kDa, i.e., 27 kDa green fluorescence protein, 105 kDa allophycocyanin, 220 kDa C-phycocyanin, and 250 kDa phycoerythrin, and DNAs up to 200-bp long, whereas 440 kDa ferritin not. Further analysis revealed that hemocyanin crystals prefer a negatively charged guest rather than a positive charge to encapsulate. Moreover, a photobleaching experiment showed that the guest does not move once entrapped. This knowledge of the host-guest study using the hollow hemocyanin crystal should be of significance for further application of hollow proteinaceous crystals as a host.

Hybrid coupling of R-phycoerythrin and the orange carotenoid protein supports the FRET-based mechanism of cyanobacterial photoprotection.

To regulate the effectiveness of photosynthesis and photoprotection cyanobacteria utilize a system consisting of only few components. Photoactivation of the orange carotenoid protein (OCP) enables its interaction with a specific, yet controversial site in the core of the light-harvesting antenna, the phycobilisome (PBS). The resulting delivery of a quenching carotenoid molecule to the antenna pigments leads to thermal dissipation of the excitation energy absorbed by the latter, and, consequently, to depression of the photosynthetic activity. The nature of the OCP-induced PBS fluorescence quenching mechanism remains debatable, however, specific protein-protein interactions between PBS and photoactivated OCP should provide a unique environment for interactions between the excitation energy donor and acceptor. Here we questioned whether the Förster theory of resonance energy transfer can explain PBS quenching by OCP even at their very small spectral overlap and whether in model systems, the absence of specific protein-protein interactions of OCP with a donor of energy can be compensated by a better spectral overlap. Hybridization of algal R-phycoerythrin with cyanobacterial OCP by chemical crosslinking results in a significant decrease of R-phycoerythrin fluorescence lifetime, irrespective of the OCP photoactivation status. Supported by structural considerations, this indicates that FRET may be the essence of cyanobacterial photoprotection mechanism.

Very Bright Phycoerythrobilin Chromophore for Fluorescence Biolabeling.

Biliproteins have extended the spectral range of fluorescent proteins into the far-red (FR) and near-infrared (NIR) regions. These FR and NIR fluorescent proteins are suitable for the bioimaging of mammalian tissues and are indispensable for multiplex labeling. Their application, however, presents considerable challenges in increasing their brightness, while maintaining emission in FR regions and oligomerization of monomers. Two fluorescent biliprotein triads, termed BDFP1.2/1.6:3.3:1.2/1.6, are reported. In mammalian cells, these triads not only have extremely high brightness in the FR region, but also have monomeric oligomerization. The BDFP1.2 and BDFP1.6 domains covalently bind to biliverdin, which is accessible in most cells. The BDFP3.3 domain noncovalently binds phycoerythrobilin that is added externally. A new method of replacing phycoerythrobilin with proteolytically digested BDFP3.3 facilitates this labeling. BDFP3.3 has a very high fluorescence quantum yield of 66 %, with maximal absorbance at λ=608 nm and fluorescence at λ=619 nm. In BDFP1.2/1.6:3.3:1.2/1.6, the excitation energy that is absorbed in the red region by phycoerythrobilin in the BDFP3.3 domain is transferred to biliverdin in the two BDFP1.2 or BDFP1.6 domains and fluoresces at λ≈670 nm. The combination of BDFP3.3 and BDFP1.2/1.6:3.3:1.2/1.6 can realize dual-color labeling. Labeling various proteins by fusion to these new fluorescent biliproteins is demonstrated in prokaryotic and mammalian cells.

R-phycoerythrin proteins@ZIF-8 composite thin films for mercury ion detection.

Mercury, as one of the most prevalent toxic metals released by various natural and anthropogenic processes, causes severe pollution of soil and groundwater. In this work, R-phycoerythrin (R-PE) proteins encapsulated into ZIF-8 composite thin films were prepared via a solid-confinement conversion process and applied as fluorescent sensors for mercury ion detection. The R-PE proteins encapsulated into ZIF-8 exhibit dual color emissions including green (518 nm) and red (602, 650 nm) fluorescence, while the original orange emission (578 nm) of pure R-PE is significantly suppressed. R-PE@ZIF-8 presents excellent selectivity and sensitivity for mercury detection in a large pH range without buffer solution. Under the optimal conditions, there is a good linear relationship between the fluorescence quenching efficiencies of R-PE@ZIF-8 and logarithmic concentrations of mercury ions in the range of 0.001-50 µM with the detection limit (LOD) of 6.7 nM much lower than the guideline value given by the World Health Organization. Furthermore, multi-peak detection of R-PE@ZIF-8 improves the detection accuracy of Hg2+ concentration.

DNAzyme-Functionalized R-Phycoerythrin as a Cost-Effective and Environment-Friendly Fluorescent Biosensor for Aqueous Pb2+ Detection.

The sensitive detection of Pb2+ is of significant importance for food safety, environmental monitoring, and human health care. To this end, a novel fluorescent biosensor, DNAzyme-functionalized R-phycoerythrin (DNAzyme-R-PE), was presented for Pb2+ analysis. The biosensor was prepared via the immobilization of Iowa Black® FQ-modified DNAzyme-substrate complex onto the surface of SPDP-functionalized R-PE. The biosensor produced a minimal fluorescence signal in the absence of Pb2+. However, Pb2+ recognition can induce the cleavage of substrate, resulting in a fluorescence restoration of R-PE. The fluorescence changes were used to measure sensitively Pb2+ and the limit of detection was 0.16 nM with a linear range from 0.5-75 nM. Furthermore, the proposed biosensor showed excellent selectivity towards Pb2+ even in the presence of other metal ions interferences and was demonstrated to successfully determine Pb2+ in spiked lake water samples.

An improved crystal structure of C-phycoerythrin from the marine cyanobacterium Phormidium sp. A09DM.

C-Phycoerythrin (PE) from Phormidium sp. A09DM has been crystallized using different conditions and its structure determined to atomic resolution (1.14 Å). In order for the pigment present, phycoerythrobilin (PEB), to function as an efficient light-harvesting molecule it must be held rigidly (Kupka and Scheer in Biochim Biophys Acta 1777:94-103, 2008) and, moreover, the different PEB molecules in PE must be arranged, relative to each other, so as to promote efficient energy transfer between them. This improved structure has allowed us to define in great detail the structure of the PEBs and their binding sites. These precise structural details will facilitate theoretical calculations of each PEB's spectroscopic properties. It was possible, however, to suggest a model for which chromophores contribute to the different regions of absorption spectrum and propose a tentative scheme for energy transfer. We show that some subtle differences in one of these PEB binding sites in two of the 12 subunits are caused by crystal contacts between neighboring hexamers in the crystal lattice. This explains some of the differences seen in previous lower resolution structures determined at two different pH values (Kumar et al. in Photosyn Res 129:17-28, 2016).

C-Phycoerythrin as a Colorimetric and Fluorometric Probe for the Sensitive, Selective and Quantitative Detection of Cu2+ in Aqueous Samples.

C-phycoerythrin (CPE) was investigated as a colorimetric and fluorometric quantitative sensor for Cu2+ ions in an aqueous medium. UV - visible studies with 50 µM concentration of different metals were carried out with only Cu and Ag showing changes in the absorption spectra. Fluorescence emission studies showed similar results. UV - visible titration of CPE with different [Cu] resulted in a linear relationship within 10 µM Cu and a 'naked eye' visible difference in colour, most likely due to the formation of a CPE - Cu complex. Fluorescence emission of CPE was quenched rapidly within 5 min of mixing. Fluorescence emission titration studies revealed gradually decreasing CPE emission with increasing [Cu] with a Stern - Volmer constant of 2.5 × 104 M-1 and a detection limit of 5 µM.. CPE was selective for Cu even in the presence of different metals which were 5 times the concentration of Cu; it was also effective in aqueous samples spiked with Cu. FTIR studies showed considerable changes in the amide III, indicating side chain interactions, even as the protein backbone remained largely unaffected.