FeS2 nanosheets-luminol-O2 chemiluminescence method for determination of venlafaxine hydrochloride, imipramine hydrochloride, and cefazolin sodium.

This study introduces a novel chemiluminescence (CL) approach utilizing FeS2 nanosheets (NSs) catalyzed luminol-O2 CL reaction for the measurement of three pharmaceuticals, namely venlafaxine hydrochloride (VFX), imipramine hydrochloride (IPM), and cefazolin sodium (CEF). The CL method involved the phenomenon of quenching induced by the pharmaceuticals in the CL reaction. To achieve the most quenching efficacy of the pharmaceuticals in the CL reaction, the concentrations of reactants comprising luminol, NaOH, and FeS2 NSs were optimized accordingly. The calibration curves demonstrated exceptional linearity within the concentration range spanning from 4.00 × 10-7 to 1.00 × 10-3 mol L-1, 1.00 × 10-7 to 1.00 × 10-4 mol L-1, and 4.00 × 10-6 to 2.00 × 10-4 mol L-1 with detection limits (3σ) of 3.54 × 10-7, 1.08 × 10-8, and 2.63 × 10-6 mol L-1 for VFX, IPM, and CEF, respectively. This study synthesized FeS2 NSs using a facile hydrothermal approach, and then the synthesized FeS2 NSs were subjected to a comprehensive characterization using a range of spectroscopic methods. The proposed CL method was effective in measuring the aforementioned pharmaceuticals in pharmaceutical formulations as well as different water samples. The mechanism of the CL system has been elucidated.

Simple and green synthesis of carbon dots (CDs) from valerian root and application of modified mesoporous boehmite (AlOOH) with CDs as a fluorescence probe for determination of imipramine.

A novel, sensitive, rapid, and simple fluorescent probe has been developed based on green-synthesized carbon dots (CDs). In this work, CDs have been synthesized from valerian root by hydrothermal method. Transmission electron microscopy (TEM) and dynamic light scattering (DLS) results confirm the formation of CDs with sizes of less than 10 nm. Fluorescence quenching of CDs was due to the aggregation of the negative charges of CDs with the positive charge of imipramine (IMI) and was then used as the signal for determination of IMI. In addition, the cytotoxicity of CDs was determined using the MTT assay. The probe responses under optimum conditions were linear in the range of 1.0-200.0 ng mL-1 with a limit of detection of 0.6 ng mL-1. Afterwards, mesoporous boehmite (MB) was modified with synthesized CDs (CDs/MB). TEM images confirmed MB modification with CDs. In this case, the variations in the fluorescence signal for different concentrations of IMI increased leading to the higher sensitivity for IMI detection. The limit of detection and linear range for determination of IMI with CDs/MB were obtained as 0.2 and 0.5-200.0 ng mL-1, respectively. To evaluate the fluorescent probe, IMI was measured in real samples. Graphical abstract.

Toward Higher Sensitivity in Quantitative MALDI Imaging Mass Spectrometry of CNS Drugs Using a Nonpolar Matrix.

Tissue-specific ion suppression is an unavoidable matrix effect in MALDI mass spectrometry imaging (MALDI-MSI), the negative impact of which on precision and accuracy in quantitative MALDI-MSI can be reduced to some extent by applying isotope internal standards for normalization and matrix-matched calibration routines. The detection sensitivity still suffers, however, often resulting in significant loss of signal for the investigated analytes. An MSI application considerably affected by this phenomenon is the quantitative spatial analysis of central nervous system (CNS) drugs. Most of these drugs are low molecular weight, lipophilic compounds, which exhibit inefficient desorption and ionization during MALDI using conventional polar acidic matrices (CHCA, DHB). Here, we present the application of the (2-[(2 E)-3-(4- tert-butylphenyl)-2-methylprop-2-enylidene]malononitrile) matrix for high sensitivity imaging of CNS drugs in mouse brain sections. Since DCTB is usually described as an electron-transfer matrix, we provide a rationale (i.e., computational calculations of gas-phase proton affinity and ionization energy) for an additional proton-transfer ionization mechanism with this matrix. Furthermore, we compare the extent of signal suppression for five different CNS drugs when employing DCTB versus CHCA matrices. The results showed that the signal suppression was not only several times lower with DCTB than with CHCA but also depended on the specific tissue investigated. Finally, we present the application of DCTB and ultrahigh resolution Fourier transform ion cyclotron resonance mass spectrometry to quantitative MALDI imaging of the anesthetic drug xylazine in mouse brain sections based on a linear matrix-matched calibration curve. DCTB afforded up to 100-fold signal intensity improvement over CHCA when comparing representative single MSI pixels and >440-fold improvement for the averaged mass spectrum of the adjacent tissue sections.

Adsorptive stripping voltammetric determination of imipramine, trimipramine and desipramine employing titanium dioxide nanoparticles and an Amberlite XAD-2 modified glassy carbon paste electrode.

An Amberlite XAD-2 (XAD2) and titanium dioxide nanoparticles (TNPs) modified glassy carbon paste electrode (XAD2-TNP-GCPE) was developed for the determination of imipramine (IMI), trimipramine (TRI) and desipramine (DES). The electrochemical behavior of these molecules was investigated employing cyclic voltammetry (CV), chronocoulometry (CC), electrochemical impedance spectroscopy (EIS) and adsorptive stripping differential pulse voltammetry (AdSDPV). After optimization of analytical conditions using a XAD2-TNP-GCPE electrode at pH 6.0 phosphate buffer (0.1 M), the peak currents were found to vary linearly with its concentration in the range of 1.30 × 10(-9) to 6.23 × 10(-6) M for IMI, 1.16 × 10(-9) to 6.87 × 10(-6) M for TRI and 1.43 × 10(-9) to 5.68 × 10(-6) M for DES. The detection limits (S/N = 3) of 3.93 × 10(-10), 3.51 × 10(-10) and 4.35 × 10(-10) M were obtained for IMI, TRI and DES respectively using AdSDPV. The prepared modified electrode showed several advantages such as a simple preparation method, high sensitivity, very low detection limits and excellent reproducibility. The proposed method was employed for the determination of IMI, TRI and DES in pharmaceutical formulations, blood serum and urine samples.

On-Chip Electromembrane Surrounded Solid Phase Microextraction for Determination of Tricyclic Antidepressants from Biological Fluids Using Poly(3,4-ethylenedioxythiophene)-Graphene Oxide Nanocomposite as a Fiber Coating.

In the present study, on-chip electromembrane surrounded solid phase microextraction (EM-SPME) was employed in the determination of tricyclic antidepressants (TCAs), including amitriptyline, nortriptyline, imipramine, desipramine, maprotiline, and sertraline, from various biological fluids. In this regard, poly(3,4-ethylenedioxythiophene)-graphene oxide (PEDOT-GO) was electrodeposited on an SPME fiber as a conductive coating, then the fiber played the acceptor-electrode role during the extraction. Thus, the immigration of the analytes under the influence of an electric field and their absorption onto the fiber coating were accomplished simultaneously. Under the optimized conditions, the limits of detection for the target analytes were acquired in the range of 0.005-0.025 µg L-1 using gas chromatography-mass spectrometry. The linearity of the method was 0.010-500 µg L-1 for the imipramine and sertraline, 0.025-500 µg L-1 for the amitriptyline, nortriptyline, and desipramine, and 1.000-250 µg L-1 for the maprotiline (R2 ≥ 0.9984). Moreover, this method provided suitable precision and fiber-to-fiber reproducibility, with RSDs ≤ 8.4%. The applicability of the proposed setup was eventually investigated for extraction of the drugs from human bone marrow aspirate, urine, plasma, and well water samples, in which satisfactory relative recoveries, from 93-105%, were obtained.

Controlled-pH tissue cleanup protocol for signal enhancement of small molecule drugs analyzed by MALDI-MS imaging.

The limit of detection of low-molecular weight compounds in tissue sections, analyzed by matrix assisted laser desorption ionization mass spectrometry imaging (MALDI-MSI), was significantly improved by employing sample washing using a pH-controlled buffer solution. The pH of the washing solutions were set at values whereby the target analytes would have low solubility. Washing the tissue sections in the buffered solution resulted in removal of endogenous soluble ionization-suppressing compounds and salts, while the target compound remained in situ with minor or no delocalization during the buffered washing procedure. Two pharmaceutical compounds (cimetidine and imipramine) and one new protease inhibitor compound were successfully used to evaluate the feasibility of the pH-controlled tissue washing protocol for MALDI-MSI. Enhancement in signal-to-noise ratio was achieved by a factor of up to 10.

Functional expression of milligram quantities of the synthetic human serotonin transporter gene in a tetracycline-inducible HEK293 cell line.

The serotonin transporter (SERT), a member of the solute carrier 6 family, is responsible for reuptake of the monoamine neurotransmitter serotonin (5-hydroxytryptamine) from the synaptic cleft on the neural cells, and a vital target for several antidepressants. To investigate biophysical studies of this pharmacologically relevant transporter, we developed a mammalian expression system with tetracycline-inducible HEK293 cells using synthetic human SERT genes produced by PCR-based self-assembly method. Codon-optimization of this de novo constructed genes and construction of stable cell lines improved expression 3.5-fold and single-step immunoaffinity purification with FLAG-epitope tag yielded around one milligram functional SERT per liter culture medium assessed by [(3)H] imipramine ligand binding. Some characterizations including electrospray ionization MS/MS analysis, subcellular localization and cellular-uptake assay demonstrated that expressed human SERT was properly expressed, folded and fully functional. The long cytosolic N-terminal of SERT was predicted as containing 'intrinsically disordered region (IDR)' (∼85 residues) by DISOPRED2 program. We engineered this salient region by step-wise truncation and ligand binding assay determined that dissociation constant for a series of de novo designed truncation constructs was close to the one for full-length wild type SERT. Our expression platform using synthetic codon-optimized gene and mammalian stable cell lines is feasible to produce milligram-scale functional membrane transporter for further biophysical and biochemical studies.

Evaluation of the potential of surface enhancement Raman spectroscopy for detection of tricyclic psychotropic drugs. Case studies on imipramine and its metabolite.

The potential use of surface Raman enhanced spectroscopy (SERS) for confirmatory identification and the semi-quantitative analysis of selected tricyclic antidepressants (TCAs) is examined utilizing a conventional silver colloid. Raman and SERS spectra of aqueous solutions of imipramine (Imi) and its metabolite, desipramine (Des), were recorded as the function of concentration using NIR excitation. A good linear correlation is observed for the dependence of the SERS signal at 684 cm(-1) (R(2) = 0.9997) on Imi concentration over the range of 0.75-7.5 µM. The limit of detection of imipramine in the silver colloidal solution is 0.98 µM. SERS spectra of Imi and Des were also recorded for blood plasma samples without prior purification as well as after the use of standard solid phase extraction. All spectra show the characteristic spectral profile of the molecules and moreover, stronger signal enhancement is observed for Imi in the "raw" samples as opposed to Imi extracted from a biological matrix.

Quantitative determination of fluoxetine in human serum by high performance thin layer chromatography.

A high performance thin layer chromatographic method was developed and validated for the quantification of fluoxetine in human serum. Fluoxetine was extracted by liquid-liquid extraction method with diethyl ether as extraction solvent. Imipramine was used as internal standard. The chromatographic separation was achieved on precoated silica gel F 254 high performance thin layer chromatographic plates using a mixture of toluene/acetic acid glacial (4:5 v/v) as mobile phase. 4-Dimethylamino-azobenzene-4-sulphonyl chloride was used as derivatization reagent. Densitometric detection was done at 272 nm. The method was linear between 12.5 and 87.5 ng/spot, corresponding to 0.05 and 0.35 ng/microL of fluoxetine in human serum after extraction process and applying 25 microL to the chromatographic plates. The method correlation coefficient was 0.999. The intra-assay and inter-assay precisions, expressed as the RSD, were in the range of 0.70-2.01% (n=3) and 0.81-3.90% (n=9), respectively. The LOD was 0.23 ng, and the LOQ was 0.70 ng. The method proved be accurate, with a recovery between 94.75 and 98.95%, with a RSD not higher than 3.61% and was selective for the active principle tested. This method was successfully applied to quantify fluoxetine in patient serum samples. In conclusion, the method is useful for quantitative determination of fluoxetine in human serum.

Simultaneous determination of imipramine hydrochloride and chlordiazepoxide in pharmaceutical preparations by spectrophotometric, RP-HPLC, and HPTLC methods.

A binary mixture of imipramine HCl and chlordiazepoxide was determined by three different methods. The first involved determination of imipramine HCl and chlordiazepoxide using the first derivative spectrophotometric technique at 219 and 231.5 nm over the concentration ranges of 1-20 and 2-24 microg/mL with mean accuracies of 99.47 +/- 0.78 and 101.43 +/- 1.20%, respectively. The second method utilized RP-HPLC with methanol-acetonitrile-0.065 M ammonium acetate buffer (45 + 25 + 30, v/v/v, pH adjusted to 5.6 +/- 0.02 with phosphoric acid) as the mobile phase pumped at a flow rate of 1.0 mL/min. Quantification was achieved using UV detection at 240 nm over concentration ranges of 0.25-4.0 and 0.1-1.6 microg/mL, with mean accuracies of 101.17 +/- 0.56 and 100.67 +/- 0.40% for imipramine HCl and chlordiazepoxide, respectively. The third method was HPTLC with carbon tetrachloride-acetone-triethylamine (pH 8.3; 6 + 3 + 0.3, v/v/v) as the mobile phase. Quantification was achieved with UV detection at 240 nm over concentration ranges of 50-600 and 20-240 ng/spot with mean accuracies of 99.51 +/- 0.59 and 100.59 +/- 0.84% for imipramine HCl and chlordiazepoxide, respectively. The suggested procedures were checked using prepared mixtures, and were successfully applied for the analysis of pharmaceutical preparations. The accuracy and precision of the methods were confirmed when the standard addition technique was applied. The results obtained by applying the proposed methods were statistically analyzed.

Screening and characterization of reactive metabolites using glutathione ethyl ester in combination with Q-trap mass spectrometry.

The present study describes a new analytical approach for the detection and characterization of chemically reactive metabolites using glutathione ethyl ester (GSH-EE) as the trapping agent in combination with hybrid triple quadrupole linear ion trap mass spectrometry. Polarity switching was applied between a negative precursor ion (PI) survey scan and the positive enhanced product ion (EPI) scan. The negative PI scan step was carried out monitoring the anion at m/z 300, corresponding to deprotonated gamma-glutamyl-dehydroalanyl-glycine ethyl ester originating from the GSH-EE moiety. Samples resulting from incubations in the presence of GSH-EE were cleaned and concentrated by solid-phase extraction, followed by the PI-EPI analysis. Unambiguous identification of GSH-EE-trapped reactive metabolites was greatly facilitated by the unique survey scan of the anion at m/z 300, which achieved less background interference, in particular, from endogenous glutathione adducts present in human liver microsomes. Further structural characterization was achieved by analyzing positive MS(2) spectra that featured rich fragments without mass cutoff and were acquired in the same liquid chromatography-tandem mass spectrometry (LC-MS/MS) analysis. The effectiveness and reliability of this approach was evaluated using a number of model compounds in human liver microsomal incubations, including acetaminophen, amodiaquine, carbamazepine, 4-ethylphenol, imipramine and ticlopidine. In addition, iminoquinone reactive metabolites of mianserin were trapped and characterized for the first time using this method. Compared to neutral loss (NL) scanning assays using GSH as the trapping agent, the results have demonstrated superior selectivity, sensitivity, and reliability of this current approach.

Selective drug metabolite trace analysis by very high-volume injections and heartcut two-dimensional (2D)-ultrahigh performance liquid chromatography (UHPLC).

The application of two-dimensional liquid chromatography (2D-LC) is gradually growing also in the area of metabolite profiling and identification. The current contribution describes a heartcut 2D-UHPLC configuration that is applied in support of drug metabolism studies in development. The setup applies four LC columns: two analytical UHPLC columns to perform the first and second dimension separations, which are both preceded by a short HPLC column operated as trapping column. The first HPLC column allows a significant online preconcentration by large volume injection. The second short HPLC column is placed between the first and second dimension columns and enables the selection of orthogonal conditions in the second dimension independent of the first dimension making the heartcutting 2D approach more generic. The value of the setup was demonstrated with selective ultraviolet chromatograms obtained for the two major hydroxylated metabolites of atorvastatin separating them from a very high biological background, originating from an injection of 4 mL feces extract, by heartcut 2D-LC. In a second application, the main metabolite of imipramine was baseline separated from some minor metabolites that were co-eluting in the first dimension, allowing accurate and sensitive quantification. A quantification limit in the attogram/mL range was achieved thanks to the injection of 200 mL diluted urine, corresponding to 100 mL urine on column.

Evaluation of molecularly imprinted polymers for chlorpromazine and bromopromazine prepared by multi-step swelling and polymerization method-The application for the determination of chlorpromazine and its metabolites in rat plasma by column-switching LC.

Monodisperse molecularly imprinted polymers (MIPs) for chlorpromazine (CPZ) and bromopromazine (BPZ), MIPCPZ and MIPBPZ, were prepared using methacrylic acid as a functional monomer and ethylene glycol dimethacrylate as a crosslinker by multi-step swelling and polymerization. The retention and molecular-recognition properties of MIPCPZ and MIPBPZ were evaluated using a mixture of potassium phosphate buffer and acetonitrile or a mixture of water and acetonitrile including ammonium formate as a mobile phase in reversed-phase LC. On MIPBPZ, CPZ, BPZ and imipramine (IMP) gave the maximal retention factors at a mobile-phase pH 8, while the maximal imprinting factors were obtained at a mobile-phase pH 7. Each MIP recognized a template molecule the most, while CPZ metabolites, desmethyl CPZ (DM-CPZ), CPZ sulfoxide (CPZ-SO) and 7-hydroxy CPZ (7-OH-CPZ), were moderately recognized on MIPCPZ and MIPBPZ. Furthermore, both MIPs gave the similar retention and molecular-recognition for CPZ and its metabolites. For avoiding the template-leakage problems, MIPBPZ was used as the pretreatment column for the determination of CPZ and its metabolites in rat plasma in column-switching LC with UV detection. In addition to DM-CPZ and CPZ-SO, didesmethyl CPZ (DDM-CPZ) and CPZ N-oxide (CPZ-NO) were speculated as the metabolite in rat plasma after administration of CPZ using LC-ESI-TOF-MS, while 7-OH-CPZ was not detected. The column-switching LC method was validated and applied for the determination of CPZ and its metabolites, DM-CPZ, DDM-CPZ, CPZ-SO and CPZ-NO, in rat plasma after intravenous and oral administration of CPZ using IMP as an internal standard.

Combination of electromembrane extraction and electro-assisted liquid-liquid microextraction: A tandem sample preparation method.

As a well-known extraction procedure, electromembrane extraction (EME) was combined with electro-assisted liquid-liquid microextraction (EA-LLME) in the present work, which resulted in a promising method. This hyphenated sample preparation method, named EME-EA-LLME, was followed by GC for the determination of two model analytes (clomipramine and imipramine). The effective parameters of both EME and EA-LLME (such as organic solvent, pH of acceptor and sample solutions, voltage and extraction time) were optimized. The proposed EME-EA-LLME procedure demonstrated good linearity with coefficients of determination, R2 ≥ 0.998 over the concentration range of 0.5-750 ng/mL. Limit of detection for both analytes was 0.15 ng/mL. The corresponding repeatability ranged from 6.9 to 12.2% (n = 3). The high enrichment factors were obtained as 770.3 and 561.4 for imipramine and clomipramine, respectively. The advantages of this tandem sample preparation method were low detection limits, simplicity, low cost, and short analysis time (<10 min). Finally, the optimized method was used to extract and determine the analytes in urine and wastewater samples. Overall, the results revealed that the developed EME-EA-LLME procedure had better extraction efficiency in comparison with EME and EA-LLME alone.

The effect of beta-cyclodextrin on liquid chromatography/electrospray-mass spectrometry analysis of hydrophobic drug molecules.

Cyclodextrins (CDs) are widely used in the pharmaceutical industry for their capability of improving bioavailability, solubility, or stability of drugs via the formation of soluble inclusion complexes. CDs have also been widely used in various chemical analysis methods. In this work, liquid chromatography/electrospray mass spectrometry (LC/ESI-MS) analysis for four different drugs (imipramine, desipramine, propranolol, and naproxen) that form inclusion complexes with CDs was performed in the presence and absence of beta-CD. These drugs are subject to nonspecific adsorption when brought into contact with plastics, such as HPLC tubing, sample collection and preparation apparatus, etc. Inclusion of the CD in the samples reduces this nonspecific adsorption due to competitive complex formation between the CD and the analyte. ESI-MS ion intensities increased when beta-CD was included in the sample with concentrations up to 1% (w:v), with a diverter valve installed post LC column. The degree of increased ion signal correlated with the beta-cyclodextrin:analyte binding constant. beta-CD appeared to elute within the void volume time and was observed in a full spectrum scan among the different analyte samples with up to 0.01% beta-CD injected directly to the LC/MS system with the diverter valve switched inline with the mass spectrometer. The use of the diverter valve allowed for direct injection of samples containing up to 1% beta-CD to the LC/MS without any deterioration of analyte ion signal.

Comparative drug release studies of two cationic drugs from pH-responsive nanogels.

pH-responsive nanogels consisting of methacrylic acid-ethyl acrylate (MAA-EA) cross-linked with di-allyl phthalate (DAP) were synthesized via the emulsion polymerization process. Delivery systems based on pH-responsive nanoparticles can control the release of rapidly metabolized drugs and/or have the ability to protect sensitive drugs, thereby making them ideal candidates for drug delivery applications. In this study, a drug selective electrode (DSE) was used to directly measure the concentration of procaine hydrochloride (PrHy) and imipramine hydrochloride (IMI) released from MAA-EA nanogels. With a single drug delivery system, drug release for two different drugs loaded via two distinctly different interaction forces was demonstrated. Drug release was conducted using the DSE under different pHs, MAA-EA molar ratio and DAP content. The release rate increased with pH for PrHy loaded nanogels and MAA-EA molar ratio but decreased with pH for IMI loaded nanogels and DAP content. PrHy was found to be hydrophobically bounded, while IMI was found to be electrostatically bounded onto the MAA-EA nanogels, which was further enhanced by hydrogen bonding.

Liquid-Phase Microextraction and Gas Chromatographic-Mass Spectrometric Analysis of Antidepressants in Vitreous Humor: Study of Matrix Effect of Human and Bovine Vitreous and Saline Solution.

In forensic bioanalytical methods, there is a general agreement that calibrators should be prepared by fortifying analytes in matrix-based blank samples (matrix-based). However, in the case of vitreous humor (VH), the collection of blank samples for the validation and for routine analysis would require the availability of many cadavers. Besides the difficulty of obtaining enough blank VH, this procedure could also represent an ethical issue. Here, a study of matrix effect was performed taking into consideration human and bovine vitreous and saline solution (SS) (NaCl 0.9%). Tricyclic antidepressants [amitriptyline (AMI), nortriptyline (NTR), imipramine (IMI) and desipramine (DES)] were used as model analytes and were extracted from samples by means of liquid-phase microextraction and detected by gas chromatography-mass spectrometry. Samples of human and bovine VH and SS were prepared in six different concentrations of antidepressants (5, 40, 80, 120, 160 and 200 ng/mL) and were analyzed. Relative matrix effect was evaluated by applying a two-tailed homoscedastic Student's t-test, comparing the results obtained with the set of data obtained with human VH and bovine VH and SS. No significant matrix effect was found for AMI and NTR in the three evaluated matrices. However, a great variability was observed for IMI and DES for all matrices. Once compatibilities among the matrices were demonstrated, the method was fully validated for AMI and NTR in SS. The method was applied to six VH samples deriving from real cases whose femoral whole blood (FWB) was analyzed by a previously published method. An average ratio (VH/FWB) of ∼ 0.1 was found for both compounds.

Autoradiographic analysis of tritiated imipramine binding in the human brain post mortem: effects of suicide.

In vitro quantitative autoradiography of high-affinity tritiated imipramine binding sites was performed on brains of 12 suicide victims and 12 matched controls. Region-specific differences in imipramine binding were found between the two groups. Thus, the pyramidal and molecular layers of the cornu ammoni hippocampal fields and the hilus of the dentate gyrus exhibited 80%, 60%, and 90% increases in binding in the suicide group, respectively. The postcentral cortical gyrus, insular cortex, and claustrum had 45%, 28%, and 75% decreases in binding in the suicide group, respectively. No difference in imipramine binding was observed in prefrontal cortical regions, in the basal ganglia, and in mesencephalic nuclei. No sex and postmortem delay effects on imipramine binding were found. Imipramine binding was positively correlated with age, the effect of age being most pronounced in portions of the basal ganglia and temporal cortex.

Application of two chemometric methods for the determination of imipramine, amitriptyline and perphenazine in content uniformity and drug dissolution studies.

Double-divisor spectra derivative and partial least squares methods were developed for content uniformity and dissolution tests in binary or ternary mixtures. The simultaneous determinations of perphenazine (PER) combined with amitriptyline hydrochloride (AMI) and/or imipramine hydrochloride (IMI) have been accomplished using the information of the absorption spectra of appropriate solutions. The double-divisor method is based on the use of the first derivative of the ratio spectrum obtained by dividing the absorption spectrum of the ternary mixture PER-AMI-IMI by a standard spectrum resulted from the addition of two of the three analytes in equal concentrations. The concentration of each component is then determined from their respective calibration graphs established by measuring the ratio derivative analytical signal at a specific wavelength. In this method, the linear determination ranges were of 3.65-18.24 microg/mL for PER, 4.32-21.60 microg/mL for AMI, and 4.83-24.19 microg/mL for IMI. The results were compared with those obtained by partial least squares multivariate calibration (PLS) method pre-treated by a wavelet compression-orthogonal signal correction (W-OSC) filter in zero-order derivative spectra. The calibration model was evaluated by internal validation (cross-validation) and by external validation over synthetic mixtures, content uniformity and dissolution tests. According to the dissolution profile test more than 95% of the three substances were dissolved within 10 min. The results from both techniques were statistically compared with each other and can be satisfactorily used for quantitative analysis and dissolution tests of multicomponent tablets.

2,2'-Bipyridine as a new and sensitive spectrophotometric reagent for the determination of nanoamounts of certain dibenzazepine class of tricyclic antidepressant drugs.

2,2'-bipyridine is proposed as new and sensitive spectrophotometric reagent for the determination of certain dibenzazepine class of tricyclic antidepressants. The spectrophotometric method is based on the reaction of imipramine hydrochloride (IPH), desipramine hydrochloride (DPH), clomipramine hydrochloride (CPH), trimipramine maleate (TPM) and opipramol (OPP) with iron (III) and subsequent reaction with 2,2'-bipyridine in an acetic acid medium to yield a pink color with maximum absorption at 530 nm. The color developed was stable over 3-4 h at room temperature (approximately 27 degrees C). The commonly encountered excipients and additives did not interfere with the determination. Results from the analysis of pure drugs and commercial tablets agreed well with those of the official method (United States Pharmacopoeia, 24, USP Convention, Rockville 2000, pp. 505-506, 865-867.).