Efficacy of root-end filling techniques using premixed putty type bioceramic cements: an ex vivo study.

OBJECTIVES: Currently, premixed putty-type bioceramic cements (PPBCs) have become popular materials for root-end fillings. This study investigated three root-end filling techniques using PPBCs and calcium silicate-based sealers including EDTA pretreatment. MATERIALS AND METHODS: Ninety root segments were prepared and standardized with an artificial fin and lateral canal, and assigned to three groups (n = 30). Root-end fillings were placed using BC-RRM Putty alone (Group PA), injection of BC sealer followed by BC-RRM Putty (Lid Technique: Group LT) or BC-RRM Putty with BC sealer coating (Deep putty packing technique: Group DP). Half of each group was pretreated with 17% EDTA. The radiographic images of the specimens were assessed by five graders and push-out bond strength tests were conducted. The data were analyzed with a general linear model including two-way ANOVA and chi-square test at a significance level of 5%. RESULTS: DP approach demonstrated significantly higher bond strength than LT (P < 0.05). However, there was no statistically significant difference in bond strength between PA and either DP or LT. EDTA pretreatment had no significant effect on push-out bond strength. Radiographically, for the main canal, PA and DP scored significantly higher than LT. In the fin, PA scored significantly higher than others (P < 0.05). CONCLUSION: Our study highlights variations in root-end filling techniques. Injecting a bulk of bioceramic sealer before the placement of PPBCs may reduce bond strength and radiopacity. The application of PPBCs alone or in the deep putty technique demonstrates potential for favorable outcomes. EDTA pretreatment did not enhance bond-strength. CLINICAL RELEVANCE: Careful selection and application of bioceramic materials and techniques in root-end fillings may influence the outcome of endodontic root-end surgery. When PPBCs and calcium silicate-based sealers are used together for root-end fillings, sealer followed by deep putty application may offer improved bond strength and radiographic fill compared to the lid technique.

Bacterial sealing ability of calcium silicate-based sealer for endodontic surgery: an in-vitro study.

BACKGROUND: Apical surgery with standard retrograde maneuvers may be challenging in certain cases. Simplifying apical surgery to reduce operating time and streamline retrograde manipulation is an emerging need in clinical endodontics. AIM OF THE STUDY: The aim of the study was to compare the bacterial sealing ability of a calcium silicate-based sealer with the single cone technique combined with root end resection only, and calcium silicate-based sealer as a retrograde filling versus MTA retrofilling, and to analyze bacterial viability using confocal laser scanning microscope (CLSM). MATERIALS AND METHODS: In this in vitro experimental study, 50 extracted human maxillary incisor teeth were instrumented and randomly divided into five groups: three experimental groups, a positive control group, and a negative control group (n = 10/group). In the experimental groups, the roots were obturated using the single cone technique (SCT) and a calcium silicate-based sealer. In group 1, the roots were resected 3 mm from the apex with no further retrograde preparation or filling. In groups 2 and 3, the roots were resected, retroprepared, and retrofilled with either a calcium silicate-based sealer or MTA, respectively. Group 4 (positive control) was filled with a single gutta-percha cone without any sealer. In group 5 (negative control), the canals were left empty, and the roots were sealed with wax and nail varnish. A bacterial leakage model using Enterococcus faecalis was employed to assess the sealing ability over a 30-day period, checking for turbidity and analyzing colony forming units (CFUs) per milliliter. Five specimens from each group were examined using CLSM for bacterial viability. Data for the bacterial sealing ability were statistically analyzed using chi-squared and Kruskal-Wallis tests. RESULTS: The three experimental groups did not show significant differences in terms of bacterial leakage, or bacterial counts (CFUs) (P > 0.05). However, significant differences were observed when comparing the experimental groups to the positive control group. Notably, the calcium silicate-based sealer, when used as a retrofilling, yielded the best sealing ability. CLSM imaging revealed viable bacterial penetration in all the positive control group specimens while for the experimental groups, dead bacteria was the prominent feature seen. CONCLUSION: Within the limitations of this study, it could be concluded that the bacterial sealing ability of calcium silicate-based sealer with the single cone technique combined with root end resection only and calcium silicate-based sealer as a retrograde filling were comparable with MTA retrofilling during endodontic surgical procedures.

Retrograde root canal treatment: a prospective case series.

AIM: Root canal treatment of teeth with necrotic pulps and apical periodontitis may be complicated by limited access to the root canals due to restorations and dystrophic calcifications. The objective of this study was to evaluate retrograde root canal as a primary treatment using a surgical approach as an alternative to conventional orthograde treatment. METHODOLOGY: Patients with apical periodontitis in the anterior region of the maxilla were consecutively recruited to the study over a period of 4 years. Fifty-seven patients met the inclusion criteria and received retrograde root canal treatment. A clinical and radiographic evaluation was made after 1 and 2 years postoperatively. RESULTS: Clinical and radiographically evaluation after 2 years revealed a successful outcome (as defined in this study) in 90% of the cases. CONCLUSION: Retrograde root canal as a primary treatment was a reliable alternative to treat apical periodontitis on single- and two-rooted teeth with limited orthograde access to the root canals in the maxilla.

Dye leakage and modification of fast-setting mineral trioxide aggregate.

The objective of this investigation was to determine and decrease dye leakage of fast-setting mineral trioxide aggregate (FSMTA). Specimens using differing setting times or concentrations of calcium sulfate modified FSMTA were assessed for dye penetration. Based on the results, no statistical difference was found in the dye leakage of FSMTA compared with regular mineral trioxide aggregate (MTA). The addition of 10 percent calcium sulfate resulted in a statistical reduction in dye leakage compared to both unmodified FSMTA and regular MTA.

Sealing ability of root-end filling materials.

BACKGROUND: The aim of this research was to compare the apical sealing ability of different root-end filling materials (SuperEBA(®), ProRoot MTA(®), thermoplasticized gutta-percha + AH-Plus(®), thermoplasticized RealSeal(®)), by means of microbial indicators. MATERIALS AND METHODS: Thus, 50 human single-rooted teeth were employed, which were shaped until size 5 0, retro - prepared with ultrasonic tips and assigned to 4 groups, retro-filled with each material or controls. A platform was employed, which was split in two halves: upper chamber-where the microbial suspension containing the biological indicators was introduced (E. faecalis + S. aureus + P. aeruginosa + B. subtilis + C. albicans); and a lower chamber containing the culture medium brain, heart influsion, where 3 mm of the apical region of teeth were kept immersed. Lectures were made daily for 60 days, using the turbidity of the culture medium as indicative of microbial contamination. Statistical analyses were carried out at 5% level of significance. RESULTS: The results showed microbial leakage at least in some specimens in all of the groups. RealSeal(®) has more microbial leakage, statistically significant, compared to ProRoot(®) MTA and SuperEBA(®). No significant differences were observed when compared ProRoot(®) MTA and SuperEBA(®). The gutta-percha + AH Plus results showed no statistically significant differences when compared with the other groups. CONCLUSIONS: All the tested materials showed microbial leakage. Root-end fillings with Super-EBA or MTA had the lowest bacterial filtration and RealSeal shows highest bacterial filtration.

Do gingival soft tissues benefit from the application of a papilla preservation flap technique in endodontic surgery?

PURPOSE: A healthy gingival condition after endodontic surgery may depend on adequate soft tissue management. The aim of this study was to compare 2 incision techniques, papilla base incision (PBI) and intrasulcular flap (IS), which are currently used in endodontic surgery. MATERIALS AND METHODS: In the present nonrandomized controlled clinical trial, patients requiring endodontic surgery on a single tooth were enrolled. PBI was used in 1 group and IS was used in the other group. The primary outcomes were changes in periodontal probing depth, gingival recession, and height of the interproximal mesial and distal papillae. Outcome variables were assessed preoperatively and 6 months after surgery. Between-group differences were evaluated through appropriate statistical analysis, with significance set at a P value equal to .05. RESULTS: Each group was composed of 12 patients and the 2 groups were comparable at baseline. Two weeks after surgery, papilla height decreased significantly in the IS group (2.05 and 1.80 mm at the mesial and distal aspects, respectively), whereas no significant decrease in papilla height was observed in the PBI group (0.10 and 0.20 mm). No statistically significant difference between groups was observed after 6 months. No significant difference between groups was found for gingival recession or probing depth at any follow-up time. CONCLUSIONS: Better soft tissue preservation in the early postoperative period was achieved using the PBI approach compared with the IS approach. The PBI can be recommended for endodontic surgical procedures involving esthetic regions.

Outcomes of periradicular surgery of maxillary first molars using a vestibular approach: a prospective, clinical study with one year of follow-up.

PURPOSE: The aim of the present prospective, randomized, controlled, clinical study was to compare the outcomes of periradicular surgery of the maxillary first molar tooth using the vestibular approach between 2 preoperative radiologic evaluation methods: cone beam computed tomography (CBCT) and conventional radiography. PATIENTS AND METHODS: Periradicular surgery was applied to the maxillary first molar tooth in 40 patients. The patients were divided into 2 groups. The patients in group 1 underwent examination and preoperative planning with CBCT, and the patients in group 2 underwent examination and preoperative planning with conventional radiography. The outcomes of the treatment were evaluated radiographically and clinically, and the data were analyzed statistically. RESULTS: The mean operative time was significantly shorter in group 1 than in group 2. According to the radiographic and clinical healing criteria used in the present study, the healing of patients in group 1 was rated as a success in 35%, an improvement in 40%, and a failure in 25%. In the group 2 patients, healing was rated as a success in 42.1%, an improvement in 31.6%, and a failure in 26.3%. Sinus membrane elevation was performed in 92.3% of all patients. Sinus membrane perforation occurred in 20% of the patients in group 1 and 36.8% of the patients in group 2. CONCLUSIONS: Periradicular surgery of maxillary first molars using a vestibular approach is a viable treatment method with a low complication rate. Preoperative CBCT examination demonstrated positive contributions to the treatment outcomes.

Traditional endodontic surgery versus modern technique: a 5-year controlled clinical trial.

In this study, we compared outcomes of traditional apicoectomy versus modern apicoectomy, by means of a controlled clinical trial with a 5-year follow-up. The study investigated 938 teeth in 843 patients. On the basis of the procedure performed, the teeth were grouped in 3 groups. Differences between the groups were the method of osteotomy (type of instruments used), type of preparation of retrograde cavity (different apicoectomy angles and instruments used for root-end preparation), and root-end filling material used (gray mineral trioxide aggregate or silver amalgam). Outcome (tooth healing) was estimated after 1 and 5 years, postoperatively. Clinical success rates after 1 year were 67% (306 teeth), 90% (186 teeth), and 94% (256 teeth) according to traditional apicoectomy (group 1), modern microsurgical apicoectomy using burns for osteotomy (group 2) or using piezo-osteotomy (group 3), respectively. After 1 year, group comparison results were statistically significant (P < 0.0001). Linear trend test was also statistically significant (P < 0.0001), pointing out larger healing from group 1 to group 3. After 5 years, teeth were classified into 2 groups on the basis of root-end filling material used. Clinical success was 90.8% (197 teeth) in the silver amalgam group versus 96% (309 teeth) in the mineral trioxide aggregate group (P < 0.00214). Multiple logistic regression analysis found that surgical technique was independently associated to tooth healing. In conclusion, modern apicoectomy resulted in a probability of success more than 5 times higher (odds ratio, 5.20 [95% confidence interval, 3.94-6.92]; P < 0.001) compared with the traditional technique.

Characterization of set Intermediate Restorative Material, Biodentine, Bioaggregate and a prototype calcium silicate cement for use as root-end filling materials.

AIM: To investigate the composition of materials and leachate of a hydrated prototype cement composed of tricalcium silicate and radiopacifier and compare this to other tricalcium silicate-based cements (Biodentine and Bioaggregate) to assess whether the additives in the proprietary brand cements affect the hydration of the materials, using Intermediate Restorative Material (IRM), a standard root-end filling material as a control. METHODOLOGY: The materials investigated included a prototype-radiopacified tricalcium silicate cement, Biodentine, Bioaggregate and Intermediate Restorative Material (IRM). The pH and calcium ion concentration of the leachate were investigated. The hydrated cements were characterized using scanning electron microscopy (SEM) and X-ray energy dispersive analysis (EDX), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR). RESULTS: All the cements tested were alkaline. The tricalcium silicate-based cements leached calcium in solution. Scanning electron microscopy of the prototype-radiopacified tricalcium silicate cement, Biodentine and Bioaggregate displayed hydrating cement grains, surrounded by a matrix composed of calcium silicate hydrate and calcium hydroxide. The presence of calcium hydroxide was evident from the XRD plots. FT-IR indicated the occurrence of a poorly crystalline calcium silicate hydrate. Biodentine displayed the presence of calcium carbonate. Bioaggregate incorporated a phosphate-containing phase. IRM consisted of zinc oxide interspersed in an organic matrix. CONCLUSIONS: The hydration of prototype-radiopacified tricalcium silicate cement, Biodentine and Bioaggregate resulted in the formation of calcium silicate hydrate and calcium hydroxide, which was leached in solution. The hydrated materials were composed of a cementitous phase that was rich in calcium and silicon and a radiopacifying material. Biodentine included calcium carbonate, and Bioaggregate included silica and calcium phosphate in the powders. IRM was composed of zinc oxide interspersed in a matrix of organic material.

Physicochemical properties of radiopaque dicalcium silicate cement as a root-end filling material in an acidic environment.

AIM: To investigate the effect of two solutions differing by pH (7.4 and 4.0) on the physicochemical properties of a radiopaque dicalcium silicate cement. METHODOLOGY: The cement was prepared by hand-mixing the dicalcium silicate powder with distilled water in a liquid-to-powder ratio of 0.4 mL g(-1) . A total of 253 cement specimens with dimension of 6 mm (diameter) × 3 mm (height) were used. The morphology, weight loss, porosity and diametral tensile strength of the cement were evaluated after soaking in a solution for different time intervals, in addition to pH changes in the cement-immersed solutions. RESULTS: After soaking in a pH 7.4 solution for 1 day, the particle size of precipitated apatite spherulites on the cement surfaces was greater than that obtained in a pH 4.0 solution. Solution pH did not result in a significant difference (P > 0.05) in diametral tensile strength of cement specimens at the same soaking time-point. On day 30, the sample was associated with a weight loss of 0.8% in a pH 4.0 solution, whereas in a pH 7.4 solution, a weight increase of 0.2% occurred. A greater porosity of the cement soaked in a pH 4.0 was found compared with that in the solution with pH 7.4. Soaking time affected significantly (P < 0.05) the porosity, weight change and strength of the cements in an acidic environment more than at pH 7.4. CONCLUSIONS: High apatite-forming activity and low degradation were the characteristics of a radiopaque dicalcium silicate cement.

Histometric study of resorption on replanted teeth with enamel matrix-derived protein.

BACKGROUND: Enamel matrix-derived proteins (Emdogain) stimulate the proliferation of periodontal ligament cells, contributing to their regeneration. AIM: This study was to perform histometric assessment of root surface resorption in replanted teeth with the use of Emdogain®. MATERIALS AND METHODS: Male Wistar rats (Rattus norvegicus), weighing 180 to 200 gm, were anesthetized, subjected to extraction of the upper right incisor tooth, which was then replanted into the alveoli with the following treatment: (a) control group--tooth with root canal filled with calcium hydroxide paste and (b) treated group--tooth with root canal filled with enamel matrix-derived protein. The animals were sacrificed 25 days after tooth replantation. The maxilla was processed to obtain thin sections (6 µ) and stained with hematoxylin and eosin. The resorption volume percentage of each dental element was calculated from the cementoenamel junction to the apex. RESULTS: Quantification of resorption revealed that Emdogaintreated teeth showed a lower percentage of resorption (31.58%) compared to controls (80.48%) (statistically significant values--t-test p-value=0.0431). CONCLUSION: It was concluded that Emdogain used as root canal filling has properties capable of showing a lower percentage of resorption in replanted teeth.

Periapical tissue response after use of intermediate restorative material, gutta-percha, reinforced zinc oxide cement, and mineral trioxide aggregate as retrograde root-end filling materials: a histologic study in dogs.

PURPOSE: To investigate the periapical tissue response of 4 different retrograde root-filling materials, ie, intermediate restorative material, thermoplasticized gutta-percha, reinforced zinc oxide cement (Super-EBA), and mineral trioxide aggregate (MTA), in conjunction with an ultrasonic root-end preparation technique in an animal model. MATERIALS AND METHODS: Vital roots of the third and fourth right mandibular premolars in 6 healthy mongrel dogs were apicectomized and sealed with 1 of the materials using a standardized surgical procedure. After 120 days, the animals were sacrificed and the specimens were analyzed radiologically, histologically, and scanning electron microscopically. The Fisher exact test was performed on the 2 outcome values. RESULTS: Twenty-three sections were analyzed histologically. Evaluation showed better re-establishment of the periapical tissues and generally lower inflammatory infiltration in the sections from teeth treated with the intermediate restorative material and the MTA. New root cement on the resected dentin surfaces was seen on all sections regardless of the used material. New hard tissue formation, directly on the surface of the material, was seen only in the MTA sections. There was no statistical difference in outcome among the tested materials. CONCLUSIONS: The results from this dog model favor the intermediate restorative material and MTA as retrograde fillings when evaluating the bone defect regeneration. MTA has the most favorable periapical tissue response when comparing the biocompatibility of the materials tested.

Cytocompatibility of the ready-to-use bioceramic putty repair cement iRoot BP Plus with primary human osteoblasts.

AIM: To verify the in vitro cytocompatibility of iRoot BP Plus (iRoot) and to compare it with White ProRoot MTA (MTA). METHODOLOGY: Thirty-six human maxillary incisor root canals were prepared using a step-back flaring technique. The apical 3 mm was resected perpendicular to the long axis at the roots, and root-end cavities were prepared with the aid of an ultrasonic device plus a diamond retrotip with continuous irrigation using water, producing standardized preparations. After that, the root-end cavities were filled with iRoot or MTA, and each root was exposed to cell culture media for 24 or 48 h. Human osteoblast cells were exposed to the extracts thus obtained, and a multiparametric cell viability assay was performed, evaluating mitochondrial activity, membrane integrity and cell density. The results were analysed by one-way analysis of variance, complemented with the Duncan post-test (P < 0.05). RESULTS: Cells exposed to MTA revealed a cytocompatibility pattern similar to the untreated cells (negative control), at both experimental times (P > 0.05). iRoot, however, promoted a significantly poorer viability than MTA and the control, after 48 h of exposure (P < 0.001). Nevertheless, iRoot did not induce critical cytotoxic effects because cell viability remained higher than 70% of the control group in most tests performed. CONCLUSION: iRoot and MTA were biocompatible and did not induce critical cytotoxic effects.

Use of cone beam computed tomography in the diagnosis, planning and follow up of a type III dens invaginatus case.

AIM: To present the case of a maxillary left lateral incisor with Oehlers' type III dens invaginatus in which cone beam computed tomography (CBCT) was used as an adjunctive resource in the diagnosis as well as in the planning and 2-year follow-up of the nonsurgical/surgical treatment. SUMMARY: The tooth had two root canals: a primary (main) canal with vital pulp that appeared to be closed apically and an invaginated canal that was necrotic, wide-open at the portal of exit and associated with a large chronic periapical lesion extending to the apex of the maxillary left central incisor. Radiographic tracking of a sinus tract in the labial gingiva of the affected tooth with a gutta-percha point revealed its origin to be the invagination. The CBCT scans revealed that the periapical radiolucency was significantly larger than seen radiographically as well as an increased thickness of the buccal cortical plate. Conventional root canal treatment of the primary canal was undertaken. As nonsurgical access to the invaginated canal was not possible, endodontic surgery was performed for curettage of the lesion, root-end cavity preparation using ultrasonic tips and root canal filling with white mineral trioxide aggregate (MTA). CBCT scanning after 17 months and clinical and radiographic follow-up after 24 months revealed complete periapical repair and absence of symptoms. KEY LEARNING POINTS: The combination of nonsurgical and surgical treatments produced periapical repair in a tooth with type III dens invaginatus with two root canals. CBCT may aid the diagnosis as well as the management plan and follow-up of teeth with this developmental anomaly.

The development of iron-free partially stabilized cement for use as dental root-end filling material.

AIM: To determine the effect of increasing the proportion of zinc on partially stabilized cement (PSC) produced using a one-step sol gel process. METHODOLOGY: A one-step sol-gel process of Portland cement-based PSC with Zn was synthesized by replacing iron nitrate. The crystalline phases of the PSC-Zn powder were analysed by using X-ray diffraction (XRD). The experimental groups [i.e., MTA, PSC-Fe (control), PSC with 1% Zn, PSC with 3% Zn, and PSC with 5% Zn] were immersed in simulated body fluid for 3 h, 1 and 3 days to evaluate the hydration product formation. The microstructure and surface morphology were analysed using scanning electron microscopy (SEM). Initial and final setting times of the materials were determined using an ASTM Vicat needle testing machine. To evaluate the cytotoxicity of PSC-Zn system, primary osteoblasts cell lines were used. RESULTS: The addition of increased weight percentages of Zn, resulted in a more unstable phase which favoured the formation of a monoclinic structure of C3 S with an increased hydration reaction of PSC and reduced setting time. The cytotoxicity testing of PSC with Zn revealed that the material was not toxic. CONCLUSIONS: The newly synthesized PSC-Zn material had short setting time and was biocompatible.

Esthetic periodontal surgery for impacted dilacerated maxillary central incisors.

Clinicians do not frequently see impacted dilacerated maxillary incisors in their patients. When they do, there are several diagnostic and management challenges for correcting root dilacerations. An unfavorable esthetic outcome might occur as a result of soft-tissue complications during surgical eruption procedures. We present 2 patients with an impacted and dilacerated maxillary central incisor. Computed tomography scans with 3-dimensional reformation were used to accurately assess the positions of the dilacerated teeth, the degree of dilaceration, and the stage of root formation. The therapy primarily involved 2-stage crown exposure surgery combined with orthodontic traction. An apicoectomy was performed on 1 dilacerated tooth; the other exhibited pulp vitality. This article highlights the periodontal surgical strategies for the esthetic management of inverted crowns. Through periodontal plastic surgery and interdisciplinary cooperation, the impacted dilacerated central incisors were properly aligned, and successful esthetic results were achieved.

Orthograde retreatment failure with extruded MTA apical plug in a large periradicular lesion followed by surgical intervention: case report.

Absence of periapical healing after orthograde retreatment using an apical plug with mineral trioxide aggregate (MTA) can require surgical intervention. A patient with a root-filled maxillary central incisor with chronic apical periodontitis and sinus tract was referred for endodontic retreatment. Excessive apical enlargement was verified, indicating an MTA apical plug placement; however, an unintentional extrusion of MTA occurred during this step. The root canal was filled with gutta-percha and sealer, and periodic recalls were scheduled. The sinus tract was observed after six months and the lesion remained unaltered, although the extruded MTA had resorbed; therefore, an apicoectomy and retrograde root-end filling with MTA were performed. Absence of sinus tract, normal clinical aspect, and complete repair of the lesion were observed at the two-year follow-up.

In vitro biocompatibility tests of glass ionomer cements impregnated with collagen or bioactive glass to fibroblasts.

AIM AND DESIGN: To evaluate the biocompatibility of glass ionomer cement (GIC) impregnated with collagen or bioactive glass to BHK-21 fibroblasts in vitro. Mineral Trioxide Aggregate was used as the standard for comparison. Human maxillary central incisors (n = 70) were instrumented with a rotary NiTi system and filled. Following resection of the apical 3mm, root end cavities were prepared and restored with conventional GIC (group 1) or GIC with 0.01%, 0.1% or 1% collagen (groups 2, 3, 4 respectively) or, 10%, 30% or 50% bioactive glass (groups 5, 6, 7 respectively), or Mineral Trioxide Aggregate (group 8). The root slices were incubated in tissue culture plates with BHK-21 fibroblast cell line. Phase contrast and scanning electron microscopes were used to score cell quantity, morphology and cell attachment. The data were statistically analyzed by one way ANOVA with Post Hoc Tukey HSD test (p = 0.05). RESULTS AND CONCLUSIONS: Group 5 showed the highest scores which was significantly higher than all other groups (p < 0.05) except group 8, with which there was no significant difference (p > 0.05). Glass ionomer cement with 10% bioactive glass showed better adhesion and spreading of cells than glass ionomer cement with 0.01% collagen. The biocompatibility of collagen and bioactive glass was concentration dependent. The addition of bioactive glass improved the biocompatibility of glass ionomer cement to fibroblasts better than addition of collagen.

Root-end resection with or without retrograde obturation after orthograde filling with two techniques: A micro-CT study.

To evaluate the filling ability of two orthograde obturation techniques followed by the apical resection with or without retrograde obturation through micro-computed tomography (CT). Thirty-two single-rooted permanent teeth were prepared and randomised into four groups (n = 8) according to the orthograde obturation technique (single cone technique [SCT] and mineral trioxide aggregate placement) combined or not with retrograde obturation. The volume of voids (VoV) within the entire endodontic space, the apical 3 mm, and 1 mm after root resection was calculated by micro-CT. Statistical analysis showed no significant difference among the groups regarding the total VoV in all root canals, as well as within the apical 1 mm after root resection. The SCT and apical resection without retrograde filling showed significantly better results in terms of VoV at the apical 3 mm after root resection. Within the study limitations, SCT associated with apical resection without retrograde preparation exhibited a similar or less amount of voids than the other groups.

Conventional and surgical endodontic treatment of a maxillary first molar with unusual anatomy--a case report.

AIM: To describe conventional and surgical endodontic treatment of a maxillary left first molar with two canals on the distobuccal root and to discuss the treatment outcome. SUMMARY: According to the literature, the presence of a second canal on the distobuccal root of a maxillary first molar is rare. This anatomical anomaly might lead to an unfavourable outcome if clinicians fail to identify and treat it properly. The following case report describes conventional and surgical endodontic treatment of a maxillary left first molar with two canals on the distobuccal root. Key learning points • Anatomical variations of the root canal system are a challenge for clinicians during root canal retreatment. • The principles and techniques of endodontic microsurgery are of utmost importance in clinical practice, and clinicians should be aware of them.