Teflon promotes chromosomal recruitment of homolog conjunction proteins during Drosophila male meiosis.

Meiosis in males of higher dipterans is achiasmate. In their spermatocytes, pairing of homologs into bivalent chromosomes does not include synaptonemal complex and crossover formation. While crossovers preserve homolog conjunction until anaphase I during canonical meiosis, an alternative system is used in dipteran males. Mutant screening in Drosophila melanogaster has identified teflon (tef) as being required specifically for alternative homolog conjunction (AHC) of autosomal bivalents. The additional known AHC genes, snm, uno and mnm, are needed for the conjunction of autosomal homologs and of sex chromosomes. Here, we have analyzed the pattern of TEF protein expression. TEF is present in early spermatocytes but cannot be detected on bivalents at the onset of the first meiotic division, in contrast to SNM, UNO and MNM (SUM). TEF binds to polytene chromosomes in larval salivary glands, recruits MNM by direct interaction and thereby, indirectly, also SNM and UNO. However, chromosomal SUM association is not entirely dependent on TEF, and residual autosome conjunction occurs in tef null mutant spermatocytes. The higher tef requirement for autosomal conjunction is likely linked to the quantitative difference in the amount of SUM protein that provides conjunction of autosomes and sex chromosomes, respectively. During normal meiosis, SUM proteins are far more abundant on sex chromosomes compared to autosomes. Beyond promoting SUM recruitment, TEF has a stabilizing effect on SUM proteins. Increased SUM causes excess conjunction and consequential chromosome missegregation during meiosis I after co-overexpression. Similarly, expression of SUM without TEF, and even more potently with TEF, interferes with chromosome segregation during anaphase of mitotic divisions in somatic cells, suggesting that the known AHC proteins are sufficient for establishment of ectopic chromosome conjunction. Overall, our findings suggest that TEF promotes alternative homolog conjunction during male meiosis without being part of the final physical linkage between chromosomes.

Mass spectrometric imaging of in vivo protein and lipid adsorption on biodegradable vascular replacement systems.

Cardiovascular diseases present amongst the highest mortality risks in Western civilization and are frequently caused by arteriosclerotic vessel failure. Coronary artery and peripheral vessel reconstruction necessitates the use of small diameter systems that are mechanically stress-resistant and biocompatible. Expanded polytetrafluorethylene (ePTFE) is amongst the materials used most frequently for non-degradable and bio-degradable vessel reconstruction procedures, with thermoplastic polyurethanes (TPU) representing a promising substitute. The present study describes and compares the biological adsorption and diffusion occurring with both materials following implantation in rat models. Gel electrophoresis and thin-layer chromatography, combined with mass spectrometry and mass spectrometry imaging, were utilized to identify the adsorbed lipids and proteins. The results were compared with the analytes present in native aorta tissue. It was revealed that both polymers were severely affected by biological adsorption after 10 min in vivo. Proteins associated with cell growth and migration were identified, especially on the luminal graft surface, while lipids were found to be located on both the luminal and abluminal surfaces. Lipid adsorption and cholesterol diffusion were found to be correlated with the polymer modifications identified on degradable thermoplastic urethane graft samples, with the latter revealing extensive cholesterol adsorption. The present study demonstrates an interaction between biological matter and both graft materials, and provides insights into polymer changes, in particular, those observed with thermoplastic urethanes already after 10 min in vivo exposure. ePTFE demonstrated minor polymer modifications, whereas several different polymer signals were observed for TPU, all were co-localized with biological signals.

The interaction of a histidine-rich protein hpn with the membrane mimics: implications for pathologic roles of Hpn in Helicobacter pylori.

BACKGROUND: Hpn is a small histidine-rich protein in Helicobacter pylori. This protein has been shown to play roles in nickel storage and detoxification and to exhibit cytotoxicity to gastric epithelial cells. Hpn can be secreted outside of the bacterium and forms amyloid-like structures. OBJECTIVE: To study the interactions between Hpn and membrane mimics, which may further our understanding of the pathologic roles of this bacterium. METHODS: Various biochemical and biophysical methods, such as secondary structure determination be CD, calcein release assay with fluorescence spectrometry, and Laurdan and Prodan generalized polarization determination have been used to characterize the interaction between Hpn and membrane mimics. RESULTS: Membrane mimics induced the formation of α-helix in Hpn. The interaction disrupts the integrity of the membrane mimics and leads to the release of inner calcein probe. The experiments involving the Laurdan and Prodan fluorescence indicated that increasing the total protein/lipid ratio leads to a less ordered and more hydrated lipid membrane structure close to the water/lipid interface of lipid bilayers modeling the mitochondrial inner membrane. CONCLUSION: The present data indicated that Hpn may take part in the pathological roles of Helicobacter pylori through membrane interactions.

Effects of collagen prosthesis cross-linking on long-term tissue regeneration following the repair of an abdominal wall defect.

Collagen prostheses used to repair abdominal wall defects, depending on their pretreatment (noncross-linked vs. cross-linked), besides repair may also achieve tissue regeneration. We assessed the host tissue incorporation of different bioprostheses using a new tool that combines immunofluorescence confocal microscopy with differential interference contrast images, making it possible to distinguish newly formed collagen. Partial hernial defects in the abdominal wall of rabbits were repaired using cross-linked/noncross-linked bioprostheses. Expanded polytetrafluoroethylene (ePTFE) was used as control. After 14/30/90/180 days of implant, specimens were taken for microscopy, immunohistochemistry, and quantitative-reverse transcription-polymerase chain reaction to determine host tissue ingrowth and collagen I/III protein and 1a1/3a1 gene expression. Shrinkage and stress resistance were also examined. At 14 days, cross-linked prostheses had suffered significantly less shrinkage than ePTFE or noncross-linked prostheses. Significantly higher shrinkage was recorded for ePTFE in the longer term. Microscopy revealed encapsulation of ePTFE by neoformed tissue, while the bioprostheses became gradually infiltrated by host tissue. Noncross-linked prosthesis showed better tissue ingrowth, more intense inflammatory reaction and more rapid degradation than the cross-linked prostheses. At 14 days, cross-linked prostheses induced up-regulated collagen 1a1 and 3a1 gene expression, while noncross-linked only showed increased collagen III protein expression at 90 days postimplant. At 6 months, the tensile strengths of cross-linked prostheses were significantly greater compared with ePTFE. Our findings demonstrate that despite the cross-linked collagen prostheses promoting less tissue ingrowth than the noncross-linked meshes, they became gradually replaced by good quality host tissue and were less rapidly degraded, leading to improved stress resistance in the long term.

Application of plasma surface modification techniques to improve hemocompatibility of vascular grafts: A review.

Surface modification using plasma processing can significantly change the chemical and physical characteristics of biomaterial surfaces. When used in combination with additional modification techniques such as direct chemical or biochemical methods, it can produce novel biomaterial surfaces, which are anticoagulant, bioactive, and biomimetic in nature. This article reviews recent advances in improving hemocompatibility of biomaterials by plasma surface modification (PSM). The focus of this review is on PSM of the most commonly used polymers for vascular prostheses such as expanded polytetrafluoroethylene (PTFE), polyethylene terephthalate (Dacron(®) ), and next generation of biomaterials, including polyhedral oligomeric silsesquioxane nanocomposite.

Performance and microbial ecology of air-cathode microbial fuel cells with layered electrode assemblies.

Microbial fuel cells (MFCs) can be built with layered electrode assemblies, where the anode, proton exchange membrane (PEM), and cathode are pressed into a single unit. We studied the performance and microbial community structure of MFCs with layered assemblies, addressing the effect of materials and oxygen crossover on the community structure. Four MFCs with layered assemblies were constructed using Nafion or Ultrex PEMs and a plain carbon cloth electrode or a cathode with an oxygen-resistant polytetrafluoroethylene diffusion layer. The MFC with Nafion PEM and cathode diffusion layer achieved the highest power density, 381 mW/m(2) (20 W/m(3)). The rates of oxygen diffusion from cathode to anode were three times higher in the MFCs with plain cathodes compared to those with diffusion-layer cathodes. Microsensor studies revealed little accumulation of oxygen within the anode cloth. However, the abundance of bacteria known to use oxygen as an electron acceptor, but not known to have exoelectrogenic activity, was greater in MFCs with plain cathodes. The MFCs with diffusion-layer cathodes had high abundance of exoelectrogenic bacteria within the genus Geobacter. This work suggests that cathode materials can significantly influence oxygen crossover and the relative abundance of exoelectrogenic bacteria on the anode, while PEM materials have little influence on anode community structure. Our results show that oxygen crossover can significantly decrease the performance of air-cathode MFCs with layered assemblies, and therefore limiting crossover may be of particular importance for these types of MFCs.

Friction transfer of polytetrafluoroethylene (PTFE) to produce nanoscale features and influence cellular response in vitro.

A large number of cell types are known to respond to chemical and topographical patterning of substrates. Friction transfer of polytetrafluoroethylene (PTFE) onto substrates has been shown to produce continuous, straight, parallel nanofibres. Ammonia plasma treatment can be used to defluorinate the PTFE, decreasing the dynamic contact angle. Fibroblast and epithelial cells were elongated and oriented with their long axis parallel to the fibres, both individually and in clusters. The fibres restricted cell migration. Cell alignment was slightly reduced on the plasma-treated fibres. These results indicated that although surface topography can affect cellular response, surface chemistry also mediates the extent of this response.

The use of polymeric meshes for pelvic organ prolapse: Current concepts, challenges, and future perspectives.

Pelvic organ prolapse (POP) is one of the most common chronic disorders in women, impacting the quality of life of millions of them worldwide. More than 100 surgical procedures have been developed over the decades to treat POP. However, the failure of conservative strategies and the number of patients with recurrence risk have increased the need for further adjuvant treatments. Since their introduction, surgical synthetic meshes have dramatically transformed POP repair showing superior anatomic outcomes in comparison to traditional approaches. Although significant progress has been attained, among the meshes in clinical use, there is no single mesh appropriate for every surgery. Furthermore, due to the risk of complications including acute and chronic infection, mesh shrinkage, and erosion of the tissue, the benefits of the use of meshes have recently been questioned. The aim of this work is to review the evolution of POP surgery, analyzing the current challenges, and detailing the key factors pertinent to the design of new mesh systems. Starting with a description of the pelvic floor anatomy, the article then presents the traditional treatments used in pelvic organ disorders. Next, the development of synthetic meshes is described with an insight into how their function is dependent on both mesh design variables (i.e., material, structure, and functional treatment) and surgical applications. These are then linked to common mesh-related complications, and an indication of current research aiming to address these issues.

MYC competes with MiT/TFE in regulating lysosomal biogenesis and autophagy through an epigenetic rheostat.

Coordinated regulation of the lysosomal and autophagic systems ensures basal catabolism and normal cell physiology, and failure of either system causes disease. Here we describe an epigenetic rheostat orchestrated by c-MYC and histone deacetylases that inhibits lysosomal and autophagic biogenesis by concomitantly repressing the expression of the transcription factors MiT/TFE and FOXH1, and that of lysosomal and autophagy genes. Inhibition of histone deacetylases abates c-MYC binding to the promoters of lysosomal and autophagy genes, granting promoter occupancy to the MiT/TFE members, TFEB and TFE3, and/or the autophagy regulator FOXH1. In pluripotent stem cells and cancer, suppression of lysosomal and autophagic function is directly downstream of c-MYC overexpression and may represent a hallmark of malignant transformation. We propose that, by determining the fate of these catabolic systems, this hierarchical switch regulates the adaptive response of cells to pathological and physiological cues that could be exploited therapeutically.

Immobilization of Ochrobactrum tritici As5 on PTFE thin films for arsenite biofiltration.

Ochrobactrum tritici SCII24T bacteria is an environmental strain with high capacity to resist to arsenic (As) toxicity, which makes it able to grow in the presence of As(III). The inactivation of the two functional arsenite efflux pumps, ArsB and ACR3_1, resulted in the mutant O. tritici As5 exhibiting a high accumulation of arsenite. This work describes a method for the immobilization of the mutant cells O. tritici As5, on a commercial polymeric net after sputtered modified by the deposition of poly(tetrafluoroethylene) (PTFE) thin films, and demonstrates the capacity of immobilized cells to accumulate arsenic from solutions. Six different set of deposition parameters for PTFE thin films were developed and tested in vitro regarding their ability to immobilize the bacterial cells. The surface that exhibited a mild zeta potential value, hydrophobic characteristics, the lowest surface free energy but with a high polar component and the appropriate ratio of chemical reactive groups allowed cells to proliferate and to grow as a biofilm. These immobilized cells maintained their ability to accumulate the surrounding arsenite, making it a great arsenic biofilter to be used in bioremediation processes.

Treatment of aortocoronary vein graft lesions with membrane-covered stents: A multicenter surveillance trial.

BACKGROUND: Stent implantation in lesions of degenerated aortocoronary vein grafts is associated with a high risk of periprocedural thrombus embolization and in-stent restenosis. METHODS AND RESULTS: In a multicenter study, we followed up 109 consecutive patients (mean age 66+/-8 years, 12% female) who received polytetrafluoroethylene (PTFE) membrane-covered stents for 125 de novo stenoses in vein grafts 11+/-5 years after bypass surgery. Stent deployment was successful in all but 1 patient; 1 patient suffered from subacute stent thrombosis. Six-month cardiac mortality was 7% (8 patients), 3 patients (3%) underwent repeat bypass surgery, and 9 patients (8%) required target-lesion PTCA. Repeat angiography revealed vessel occlusions in 9% and in-stent restenosis in 8% of patients by the end of follow-up. CONCLUSIONS: Membrane-covered stents appear to be a safe and efficient treatment strategy associated with a low incidence of restenosis and target-vessel revascularization. Compared with previous studies, the investigated device is not associated with an increase in mortality or late vessel occlusions.

Surgical outcomes of primary and revision augmentation rhinoplasty using a processed fascia lata.

BACKGROUND: Dorsal augmentation is the most commonly performed procedure in rhinoplasty for Asian patients. Due to the anatomic features of the Asian nose, the use of nonautologous materials to obtain a proper degree of augmentation is inevitable in most cases. Because the use of nonautologous materials possesses a higher risk of complications, surgeons are concerned about selecting suitable materials for the procedure, especially in revision rhinoplasty. Therefore, this study was designed to evaluate the suitability and usefulness of a homologous material, Tutoplast-processed fascia lata (TPFL), in revision augmentation rhinoplasty. METHODS: Retrospective analysis of 104 rhinoplasty patients (primary, 86; revision, 18) who had undergone dorsal augmentation using TPFL was conducted. The comparison of surgical outcomes between primary and revision surgery was made using objective [dorsal height (DH) and radix height (RH), complication rate] and subjective (patient satisfaction) parameters. RESULTS: The degree of augmentation represented by DH and RH was comparable between primary and revision rhinoplasty using TPFL. In comparing the rate of postoperative complications, only minor incidents were noted, in six cases after primary surgery and in one case after revision surgery. Patient satisfaction was measured in both primary and revision augmentation, with a significant difference observed between the two groups (40.57 ± 9.25 versus 31.48 ± 7.59; p < 0.05). CONCLUSION: TPFL is a feasible implant material that delivers suitable augmentation and patient satisfaction with minimal morbidity in both primary and revision rhinoplasty.

The neuropeptide Y monomer in solution is not folded in the pancreatic-polypeptide fold.

Fluorescence-labelled analogs of NPY, a 36-amino acid peptide amide, were synthesized by solid-phase peptide synthesis and used for fluorescence-resonance energy transfer studies to investigate the conformation. Energy-transfer efficiency measurements in different media at the concentration of 10 microM are in agreement with a model of the NPY structure proposed by NMR studies (performed at millimolar concentration) in which the C-terminal part of the molecule adopts an alpha-helical conformation while the N-terminal part is flexible. According to this model, the alpha-helix is stabilized by intermolecular hydrophobic interactions because of the formation of dimers. The decrease of the peptide concentration causes a shift of the dimerization equilibrium toward the monomeric form. Energy-transfer efficiency measurements performed at lower concentrations do not support the hypothesis of the folding back of the N-terminal tail onto the C-terminal alpha-helix to yield the so-called "PP-fold" conformation. This structure is observed in the crystal structure of avian pancreatic polypeptide, a member of the NPY peptide hormone family, and it has been considered to be the bioactive one. Our results complete the structural characterization of NPY in solution at concentration ranges in which NMR experiments are not feasible. Furthermore, these results open the way to study the conformation of the receptor-bound ligand.

Protein unfolding at interfaces: slow dynamics of alpha-helix to beta-sheet transition.

A two-phase sequential dynamic change in the secondary structure of hen egg lysozyme (Lys) adsorbed on solid substrates was observed. The first phase involved fast conversion of alpha-helix to random/turns (within the first minute or at very low coverage or high substrate wettability) with no perceptible change in beta-sheet content. The second phase (1-1200 min), however, involved a relatively slow conversion from alpha-helix to beta-sheet without a noticeable change in random/turns. An important finding of this work is that the concentration of lysozyme in the adsorbed state has a substantial effect on the fractional content of secondary structures. Attenuated total reflection Fourier transform infrared (ATR/FTIR) spectroscopy, along with a newly-developed optimization algorithm for predicting the content of secondary structure motifs, was used to correlate the secondary structure and the amount of adsorbed lysozyme with the surface wettability of six different flat nanoporous substrates. Although three independent variables, surface wettability, solution concentration and time for adsorption, were used to follow the fractional structural changes of lysozyme, the results were all normalized onto a single plot with the amount adsorbed as the universal independent variable. Consequently, lateral interactions among proteins likely drive the transition process. Direct intermolecular force adhesion measurements between lysozyme and different functionalized self-assembled alkanethiol monolayers confirm that hydrophobic surfaces interact strongly with proteins. The lysozyme-unfolding pathway during early adsorption appears to be similar to that predicted by published molecular modeling results.

Evaluation of guided bone regeneration in rabbit tibia using bioresorbable and non-resorbable membranes.

The aim of this study was an evaluation of the possibility of bone regeneration in connection with implant placement, using a new bioresorbable membrane (Guidor Matrix Barrier) used previously in periodontal tissues regeneration. The study compared the bone regeneration obtained around Bonefit-ITI implants inserted in rabbit tibia using Guidor membranes, Gore-Tex membranes and in control sites. Microscopic analysis was performed after 6, 9 and 12 weeks. It was possible to see that the amount of bone around implants covered by Guidor and Gore-Tex membranes was roughly equivalent in all experimental sites at the 6-, 9- and 12-week time intervals. Also, all control sites healed completely. It could be concluded from this study that: (1) rabbit tibia cannot be recommended in research connected with guided bone regeneration, as all control sites healed in the same way as the test sites; (2) in no case did the presence or the degradation of the resorbable membrane prevent the formation of new bone; (3) no inflammatory reaction was present around the bioresorbable and the non-resorbable membranes; (4) bone formed in all cases on the outer surface of the non-resorbable membranes; (5) large Guidor membrane fragments were present in the 6-week specimens, while in the 12-week specimens only small fragments were recognizable; (6) Guidor membranes can be used in guided bone regeneration.

Factors influencing the failure of dental glass ionomer luting cement due to contraction.

Glass ionomer cement used to fix a post within the root of a tooth undergoes cohesive failure on setting. This study aimed to determine the importance of humidity, substrate material and post design on cement failure. Nine groups of five specimens were prepared: groups 1-3 addressed the influence of post design and sectioning process on cement failure, while groups 4-9 examined the interaction between the cement, substrates and humidity. Replicas were prepared of all specimens and viewed using scanning electron microscopy. It was concluded that humidity and substrate influenced the failure of glass ionomer cement whereas post design did not.

Bone formation inside the material interstices of e-PTFE membranes: a light microscopical and histochemical study in man.

Membranes used in guided bone regeneration (GBR) should possibly achieve a good degree of tissue integration with neighbouring connective tissues in order to obtain a mechanically stable environment necessary for successful bone and soft tissue healing. The authors observed, in a histological study of e-PTFE membranes used for GBR and retrieved from 10 patients, inside the material interstices of the membranes, in many cases the presence of connective tissue cells and collagen fibres, and in two cases the presence of bone. The presence, inside the membrane, of connective tissue and bone could help toward a tight integration between the membrane and neighbouring tissues, with the production of a biological seal.

Modulation of angiogenic functions in human macrophages by biomaterials.

We examined the ability of polyvinylchloride (PVC), polytetrafluorethylene (PTFE) and tissue culture polystyrene (TCPS) to affect angiogenic functions in human monocyte-derived macrophages by measuring the mRNA expression of genes encoding angiogenic and anti-angiogenic molecules including basic fibroblast growth factor (bFGF), vascular endothelial growth factor (VEGF), angiopoietin-1 (Ang-1) and thrombospondin-1 (Tsp-1). The angiogenic activity of the corresponding macrophage conditioned media (CM) was measured by the proliferation of endothelial cells and the sprouting of new capillaries from fragments of human placental blood vessels. We determined that bFGF was not expressed in macrophages while VEGF and Tsp-1 mRNAs were expressed constitutively. Ang-1 was expressed in macrophages cultured up to 7 days on PTFE and TCPS independent of the culture stage. In contrast, macrophages cultured on PVC did not produce detectable amounts of Ang-1 mRNA after 7 days. CM from macrophages cultured either on PTFE or TCPS stimulated angiogenesis whereas CM from macrophages cultured on PVC inhibited it. The results demonstrate that polymers can cause differential expression of the angiogenic molecule Ang-1 in macrophages. They also induce different phenotypes of macrophages, which can either stimulate or inhibit angiogenesis suggesting a material-dependent influence on neovascularization.

Antibiotic bonding to polytetrafluoroethylene with tridodecylmethylammonium chloride.

Polytetrafluoroethylene (PTFE) treated with the cationic surfactant, triodecylmethylammonium chloride (TDMAC), binds 14C-penicillin (1.5 to 2 mg antibiotic/cm graft), whereas untreated PTFE or PTFE treated with anionic detergents shows little binding of antibiotic. TDMAC-treated PTFE concomitantly binds penicillin and heparin, generating a surface that potentially can resist both infection and thrombosis. The retention of these biologically active molecules is not due to passive entrapment in the PTFE but reflects an ionic interaction between the anionic ligands and surface-bound TDMAC. Penicillin bound to PTFE is not removed by exhaustive washing in aqueous buffers but is slowly released in the presence of plasma or when the PTFE is placed in a muscle pouch in the rat. Muscle tissue adjacent to the treated PTFE shows elevated levels of antibiotic following implantation. PTFE treated with TDMAC and placed in a muscle pouch binds 14C-penicillin when it is locally irrigated with antibiotic or when penicillin is administered intravenously. Thus, the TDMAC surface treated either in vitro or in vivo with penicillin provides an effective in situ source for the timed release of antibiotic.

Activity of eight antibacterial agents on Staphylococcus epidermidis attached to Teflon catheters.

The presence of a Teflon catheter had no effect on the in-vitro activity of a range of antibacterial agents against slime producing and non-producing Staphylococcus epidermidis strains as determined by a microdilution assay. The susceptibility of S. epidermidis attached to Teflon catheters for 6, 24 and 48 h was also evaluated. MICs for planktonic and attached bacteria were similar. When bacteria attached to Teflon for 6 h were used as inocula, MBC values increased 32-8192-fold for the antibacterial agents tested. Similar results were observed when bacteria attached for 24 and 48 h were used as inocula. The activity of a high concentration (16 x MBC) of these antimicrobial agents against S. epidermidis biofilms in Teflon catheters was evaluated; for five slime non-producing strains, the highest reduction (around 99%) in bacterial viability was produced by cloxacillin and teicoplanin; for the slime producers, the highest effect (99.5% reduction) was shown by amikacin, clindamycin cloxacillin and ciprofloxacin but all cases still showed bacterial counts higher than 10(3) cfu/catheter segment. It is concluded that adherence of S. epidermidis to Teflon catheters decreases the bactericidal activity of the antibacterial agents tested in vitro.