Oxytocin alleviates periodontitis in adult rats.

OBJECTIVE: The objective of the study was to evaluate the expression of oxytocin receptors in normal and inflamed gingiva, as well as the effects of systemic administration of oxytocin in bone loss and gum inflammatory mediators in a rat model of experimental periodontitis. BACKGROUND DATA: Current evidence supports the hypothesis of a disbalance between the oral microbiota and the host's immune response in the pathogenesis of periodontitis. Increased complexity of the microbial biofilm present in the periodontal pocket leads to local production of nitrogen and oxygen-reactive species, cytokines, chemokines, and other proinflammatory mediators which contribute to periodontal tissue destruction and bone loss. Oxytocin has been suggested to participate in the modulation of immune and inflammatory processes. We have previously shown that oxytocin, nitric oxide, and endocannabinoid system interact providing a mechanism of regulation for systemic inflammation. Here, we aimed at investigating not only the presence and levels of expression of oxytocin receptors on healthy and inflamed gingiva, but also the effects of oxytocin treatment on alveolar bone loss, and systemic and gum expression of inflammatory mediators involved in periodontal tissue damage using ligature-induced periodontitis. Therefore, anti-inflammatory strategies oriented at modulating the host's immune response could be valuable adjuvants to the main treatment of periodontal disease. METHODS: We used an animal model of ligature-induced periodontitis involving the placement of a linen thread (Barbour flax 100% linen suture, No. 50; size 2/0) ligature around the neck of first lower molars of adult male rats. The ligature was left in place during the entire experiment (7 days) until euthanasia. Animals with periodontitis received daily treatment with oxytocin (OXT, 1000 µg/kg, sc.) or vehicle and/or atosiban (3 mg/kg, sc.), an antagonist of oxytocin receptors. The distance between the cement-enamel junction and the alveolar bone crest was measured in stained hemimandibles in the long axis of both buccal and lingual surfaces of both inferior first molars using a caliper. TNF-α levels in plasma were determined using specific rat enzyme-linked immunosorbent assays (ELISA). OXT receptors, IL-6, IL-1ß, and TNF-α expression were determined in gingival tissues by semiquantitative or real-time PCR. RESULTS: We show that oxytocin receptors are expressed in normal and inflamed gingival tissues in male rats. We also show that the systemic administration of oxytocin prevents the experimental periodontitis-induced increased gum expression of oxytocin receptors, TNF-α, IL-6, and IL-1ß (p < .05). Furthermore, we observed a reduction in bone loss in rats treated with oxytocin in our model. CONCLUSIONS: Our results demonstrate that oxytocin is a novel and potent modulator of the gingival inflammatory process together with bone loss preventing effects in an experimental model of ligature-induced periodontitis.

Probiotics enhance alveolar bone microarchitecture, intestinal morphology and estradiol levels in osteoporotic animals.

BACKGROUND AND OBJECTIVE: Osteoporosis is associated with bone microarchitecture alterations, and the depletion of estrogen during menopause is a major contributing factor to its development. The literature highlights the noteworthy role of gut microbiota in bone metabolism, particularly in the progression of osteoporosis. Periodontal disease leads to alveolar bone loss, which may be influenced by estrogen deficiency, and this mechanism is intricately associated with an imbalance in systemic microbiota. The aim of this study was to evaluate the effects of Bifidobacterium animalis subsp. lactis HN019 (B. lactis HN019) and Lacticaseibacillus casei 01 (L. casei 01) administrations on an osteoporosis animal model. MATERIALS AND METHODS: Thirty-three female rats were randomly divided into three groups: control (C-OVX), C-OVX-HN019 and C-OVX-LC01. All animals were ovariectomized. In groups C-OVX-HN019 and C-OVX-LC01, the probiotics were administered for 4 months. All animals were euthanized after 16 weeks from ovariectomy. Microtomographic, histopathological and immunohistochemical examinations were conducted on periodontal tissues, whereas histomorphometry, histopathological and immunohistochemical analyses were carried out on the intestine. The levels of estradiol were assessed in blood using an immunoenzymatic assay. The data were subjected to statistical analyses (p < .05). RESULTS: The C-OVX-LC01 group exhibited a significant reduction in alveolar bone porosity and an increase in connective tissue density compared to C-OVX (p < .05). The C-OVX-HN019 and C-OVX-LC01 groups presented reduced expression of TRAP and RANKL compared to the C-OVX (p < .05). The C-OVX group presented villi defects, mild neutrophil infiltration, decrease in both villous height and intestinal crypts and reduced expression of intestinal junctional epithelium markers e-cadherin and claudin 01 compared to C-OVX-HN019 and C-OVX-LC01 (p < .05). The C-OVX group had lower estradiol levels than C-OVX-HN019 and C-OVX-LC01 (p < .05). CONCLUSION: The probiotic therapy promoted a reduction in alveolar bone destruction and intestinal permeability as well as an increase in estradiol levels in ovariectomized rats. Specifically, the probiotic strain Lacticaseibacillus casei 01 exhibited greater effectiveness compared to Bifidobacterium animalis subsp. lactis HN019, indicating strain-dependent outcomes.

Clinical outcomes following atrophic alveolar ridge reconstruction using collagenated xenogeneic bone block or autogenous bone block: One-year follow-up of a randomized controlled clinical.

AIM: This investigation aimed to evaluate the 1-year survival of implants placed after staged lateral alveolar ridge augmentation using equine-derived collagenated xenogeneic bone blocks (CXBBs) or autogenous bone block (ABB). MATERIALS AND METHODS: Fifty patients who underwent lateral augmentation in a previous trial were included. The primary outcome measure was implant survival at the 1-year follow-up, and secondary outcomes included implant success, peri-implant clinical and volumetric parameters, pink aesthetic scores (PES) and patient-reported outcome measures. Data analysis involved Fisher's exact test, the Mann-Whitney U-test and the Wilcoxon signed-rank test. RESULTS: In this study, no late implant failures were observed. The cumulative survival rates were 78.6% for the CXBB group and 90.9% for the ABB group, with no difference between the groups. Similarly, the success rates were 53.6% and 63.6%, respectively, showing no significant difference. Peri-implant clinical and volumetric parameters indicated the presence of healthy peri-implant tissues surrounding implants placed in both CXBB- and ABB-augmented sites. PES were 8.5 and 11.0 for implants placed in CXBB- and ABB-augmented sites, respectively. Furthermore, patient satisfaction rates were high and similar between the groups. CONCLUSIONS: Dental implants placed in both CXBB- and ABB-augmented ridges demonstrated no statistically significant differences in clinical, volumetric and aesthetic outcomes, along with high patient satisfaction rates.

Efficacy and safety of a new heterologous fibrin biopolymer on socket bone healing after tooth extraction: An experimental pre-clinical study.

AIM: To assess the efficacy of heterologous fibrin biopolymer (HFB) in promoting alveolar bone healing after tooth extraction in rats. MATERIALS AND METHODS: The upper right incisors of 48 Wistar rats were extracted. Toothless sockets were filled with HFB (HFBG, n = 24) or blood clot (BCG, n = 24). The tooth extraction sites were subjected to micro-computed tomography (micro-CT), histological, histomorphometric and immunohistochemical (for Runt-related transcription factor 2/Runx2 and tartrate-resistant acid phosphatase/TRAP) analyses on days 0, 7, 14 and 42 after extraction. RESULTS: Socket volume remained similar between days 0 and 14 (69 ± 5.4 mm3), except in the BCG on day 14, when it was 10% lower (p = .043). Although the number of Runx2+ osteoblasts was high and similar in both groups (34 × 102 cells/mm2), the HFBG showed lower inflammatory process and osteoclast activity than BCG at 7 days. On day 14, the number of Runx2+ osteoblasts remained high and similar to the previous period in both groups. However, osteoclast activity increased. This increase was 55% lower in the HFBG than BCG. In the BCG, the presence of an inflammatory process and larger and numerous osteoclasts on day 14 led to resorption of the alveolar bone ridge and newly formed bone. On day 42, numbers of Runx2+ osteoblast and TRAP+ osteoclasts decreased dramatically in both groups. Although the BCG exhibited a more mature cortical bone formation, it exhibited a higher socket reduction (28.3 ± 6.67%) and smaller bone volume (37 ± 5.8 mm3) compared with HFBG (socket reduction of 14.8 ± 7.14% and total bone volume of 46 ± 5.4 mm3). CONCLUSIONS: HFB effectively suppresses osteoclast activity and reduces alveolar bone resorption compared with blood clot, thus preventing three-dimensional bone loss, particularly during the early healing period. HFB emerges as a promising biopharmaceutical material for enhancing healing processes after tooth extraction.

The adjunctive effect of polydeoxyribonucleotide on bone formation in alveolar ridge preservation: A pre-clinical in vivo study.

AIM: This study investigated the adjunctive effect of polydeoxyribonucleotide (PDRN) on bone formation in alveolar ridge preservation (ARP) sockets. MATERIALS AND METHODS: Both mandibular second, third and fourth premolars of eight beagle dogs were randomly divided into ARP and ARP/PDRN groups. Following tooth extraction, ARP procedures were conducted using collagenized alloplastic graft material and bilayer collagen membrane soaked with normal saline (ARP group) or PDRN (ARP/PDRN group) for 10 min before application. Both groups were also randomly allocated to 2-, 4- or 12-week healing subgroups. The primary endpoint of this study was to compare histomorphometric differences between ARP and ARP/PDRN. The secondary endpoints of this study were to compare micro-CT analysis and three-dimensional volumetric measurement between the two groups. RESULTS: In the histomorphometric analysis, the ARP/PDRN group exhibited greater new bone formation at coronal, middle and total position compared with the ARP group at 2-week healing. The number of newly formed blood vessels was higher in the ARP/PDRN group than in the ARP group at 2- and 4-week healing. In micro-CT analysis, the mean new bone volume/total bone volume between ARP and ARP/PDRN was statistically significant at 2-week healing. Ridge volume alterations were significantly decreased in the ARP/PDRN group during entire healing time compared with the ARP group, especially on the buccal side. CONCLUSIONS: The application of PDRN in ARP might provide additional benefits for early bone regeneration and maintenance of buccal ridge volume.

Inter and intra-operator reliability of Lekholm and Zarb classification and proposal of a novel radiomic data-driven clustering for qualitative assessment of edentulous alveolar ridges.

OBJECTIVES: The present study was conducted to evaluate the reproducibility of Lekholm and Zarb classification system (L&Z) for bone quality assessment of edentulous alveolar ridges and to investigate the potential of a data-driven approach for bone quality classification. MATERIALS AND METHODS: Twenty-six expert clinicians were asked to classify 110 CBCT cross-sections according to L&Z classification (T0). The same evaluation was repeated after one month with the images put in a different order (T1). Intra- and inter-examiner agreement analyses were performed using Cohen's kappa coefficient (CK) and Fleiss' kappa coefficient (FK), respectively. Additionally, radiomic features extraction was performed from 3D edentulous ridge blocks derived from the same 110 CBCTs, and unsupervised clustering using 3 different clustering methods was used to identify patterns in the obtained data. RESULTS: Intra-examiner agreement between T0 and T1 was weak (CK 0.515). Inter-examiner agreement at both time points was minimal (FK at T0: 0.273; FK at T1: 0.243). The three different unsupervised clustering methods based on radiomic features aggregated the 110 CBCTs in three groups in the same way. CONCLUSIONS: The results showed low agreement among clinicians when using L&Z classification, indicating that the system may not be as reliable as previously thought. The present study suggests the possible application of a reproducible data-driven approach based on radiomics for the classification of edentulous alveolar ridges, with potential implications for improving clinical outcomes. Further research is needed to determine the clinical significance of these findings and to develop more standardized and accurate methods for assessing bone quality of edentulous alveolar ridges.

Alveolar ridge preservation of two-wall bone defects using mineralized dentin matrix: An experimental pre-clinical study.

OBJECTIVES: To study bone healing of two-wall bone defects after alveolar ridge preservation using mineralized dentin matrix. MATERIALS AND METHODS: After distal roots extraction of second and fourth premolars (P2, P4) on one lateral mandible in 12 beagles, two-wall bone defects (5 × 5 × 5 mm) were surgically created distally to the remaining mesial roots of P2 and P4. A total of 24 sites were randomly allocated to three groups (implant material- time of execution): mineralized dentin matrix (MDM)-3 m (MDM + collagen membrane; 3 months), MDM-6 m (MDM particles + collagen membrane; 6 months), and C-6 m (collagen membrane only; 6 months). Clinical, radiographic, digital, and histological examinations were performed 3 and 6 months after surgery. RESULTS: The bone healing in MDM groups were better compared to Control group (volume of bone regenerated in total: 25.12 mm3 vs. 13.30 mm3, p = .046; trabecular volume/total volume: 58.84% vs. 39.18%, p = .001; new bone formation rate: 44.13% vs. 31.88%, p = .047). Vertically, the radiological bone level of bone defect in MDM-6 m group was higher than that in C-6 m group (vertical height of bone defect: 1.55 mm vs. 2.74 mm, p = .018). Horizontally, no significant differences in buccolingual bone width were found between MDM and C groups at any time or at any level below the alveolar ridge. The percentages of remaining MDM were <1% in both MDM-3 m and MDM-6 m groups. CONCLUSIONS: MDM improved bone healing of two-wall bone defects and might be considered as a socket fill material used following tooth extraction.

Jawbone measurements of edentulous sites related to implant planning using magnetic resonance imaging compared to cone beam computed tomography: An ex vivo study.

AIM: To compare measurements on images obtained by magnetic resonance imaging (MRI) and cone beam CT (CBCT) for height, width, and area in alveolar bone sites in human jaw specimens. MATERIAL AND METHODS: Forty edentulous alveolar posterior sites in human cadaver specimens were imaged using CBCT scanners, and with zero-echo-time MRI (ZTE-MRI). Semi-automatic volume registration was performed to generate representative coronal sections of the sites related to implant planning. ZTE-MRI sections were also presented after grayscale inversion (INV MRI). Three observers measured bone height, bone width 5 mm from the alveolar crest, and bone area stretching from the width measurement to the top of the alveolar crest in the images. Interobserver agreement was assessed by intra-class correlation coefficients (ICC). The measurements were analyzed using two-way repeated measures ANOVA factoring observer and image type. RESULTS: ICC was >0.95 for bone height, width, and bone area. No significant differences among observers (p = 0.14) or image type (p = 0.60) were found for bone height. For bone width, observer (p = 0.14) was not a significant factor, while ZTE-MRI produced width estimates that were significantly different and systematically smaller than CBCT-based estimates (p ≤ 0.001). Observer (p = 0.06) was not a significant factor regarding the bone area measurements, contrary to the imaging type where ZTE-MRI led to significantly smaller area estimates than CBCT (p ≤ 0.001). CONCLUSION: Bone height measurements were essentially equivalent using CBCT and MRI. This was found regardless of grayscale choice for the MRI. However, ZTE-MRI resulted in smaller estimates of bone width and area.

Adding mechanobiological cell features to finite element analysis of an immediately loaded dental implant.

Finite element analysis (FEA) has been used to analyze the behavior of dental materials, mainly in implantology. However, FEA is a mechanical analysis and few studies have tried to simulate the biological characteristics of the healing process of loaded implants. This study used the rule of mixtures to simulate the biological healing process of immediate implants in an alveolus socket and bone-implant junction interface through FEA. Three-dimensional geometric models of the structures were obtained, and material properties were derived from the literature. The rule of mixtures was used to simulate the healing periods-immediate and early loading, in which the concentration of each cell type, based on in vivo studies, influenced the final elastic moduli. A 100 N occlusal load was simulated in axial and oblique directions. The models were evaluated for maximum and minimum principal strains, and the bone overload was assessed through Frost's mechanostat. There was a higher strain concentration in the healing regions and cortical bone tissue near the cervical portion. The bone overload was higher in the immediate load condition. The method used in this study may help to simulate the biological healing process and could be useful to relate FEA results to clinical practice.

Gender-Based Variation in Alveolar Bone Thickness of Maxillary Incisor Teeth: A CBCT Retrospective Study.

BACKGROUND This retrospective study from a single center in Cyprus aimed to assess labial (buccal) and palatal bone thickness in 6 anterior maxillary teeth of 120 adults using cone-beam computed tomography (CBCT). MATERIAL AND METHODS The CBCT scans of 120 patients (720 teeth) were examined, with scanning parameters of 90 kvP, 24 s, 4 mA, voxel size 0.3 mm, and field of view of 10×6 cm. All maxillary incisors were categorized into 3 distinct points in terms of buccal (B) and palatal (P) points, with points B1 (buccal) and P1 (palatal) 4 mm below the cementoenamel junction; points B2 and P2 at the midpoint between the labial and palatal alveolar crest plane extending to the root apex; and points B3 and P3 at the root apex. Evaluation was done by measuring the distance from these points to the labial and palatal alveolar bone. RESULTS When the thicknesses were measured between all 6 points and labial and palatal bone, the thickness of point B3 of tooth 13 in men was significantly higher than that in women. At points P1, P2, and P3 for teeth 11 and 13, the palatal bone thickness of men was significantly higher than that of women. At points P2 and P3 of tooth 12, the palatal bone thickness of men was significantly higher than that of women. CONCLUSIONS The study found a correlation between alveolar bone thickness and patient sex in the North Cyprus population. Alveolar bone thickness in the anterior maxillary should be considered in implant treatment and orthodontic techniques.

Changes in the alveolar bone morphology among different patterns of incisor inclination during the alignment phase in orthodontic treatment without premolar extraction.

OBJECTIVE: The present study investigated bone remodelling in the upper and lower incisor regions depending on the inclination pattern during the alignment phase of orthodontic treatment (OT). MATERIALS AND METHODS: This prospective clinical study included 71 patients undergoing OT without premolar extraction. Cone beam computed tomography scans were taken before and after the alignment phase and the changes in the inclination, alveolar bone height (ABH) and bone thickness (BT) at levels 2, 3, 4, 6, 8 and 9 mm starting from the cementoenamel junction (CEJ) were determined. RESULTS: Teeth were divided into 'Retroinclination' (lingual crown inclination <0°), 'Proclination-low' (buccal crown inclination between 0° and 5°), or 'Proclination-high' (buccal crown inclination >5°). The alignment phase of OT resulted in ABH loss. The highest ABH loss in the maxilla was observed on the buccal side in the 'Proclination-high' and was 0.71 mm. ABH loss by 1.1 mm was observed in the mandible on the lingual side in the 'Retroinclination' group. The most significant changes in BT by up to 2 mm were observed at levels 6, 8 and 9 mm and these changes exhibited a moderate to strong correlation with the alterations in the inclination of individual incisors. At levels 2, 3 and 4 mm, the highest decrease in BT by up to 0.83 mm was observed on the palatal side of upper incisors in the 'Proclination-high' group. CONCLUSION: The direction and amount of tooth inclination partially determine changes in the bone parameters during the alignment phase.

Antibacterial properties of marine algae incorporated polylactide acid membranes as an alternative to clinically applied different collagen membranes.

The reconstruction of bony defects in the alveolar crest poses challenges in dental practice. Guided tissue regeneration (GTR) and guided bone regeneration (GBR) procedures utilize barriers to promote bone regeneration and prevent epithelial growth. This study focuses on evaluating the antibacterial properties of marine algae-polylactic acid (PLA) composite membranes compared to commercially available collagen membranes. Marine algae (Corallina elongata, Galaxaura oblongata, Cystoseira compressa, Saragassum vulgare, and Stypopodium schimperi) were processed into powders and blended with PLA to fabricate composite membranes. Cytocompatibility assays using human periodontal ligament fibroblasts (n = 3) were performed to evaluate biocompatibility. Antibacterial effects were assessed through colony-forming units (CFU) and scanning electron microscopy (SEM) analysis of bacterial colonization on the membranes. The cytocompatibility assays demonstrated suitable biocompatibility of all marine algae-PLA composite membranes with human periodontal ligament fibroblasts. Antibacterial assessment revealed that Sargassum vulgare-PLA membranes exhibited the highest resistance to bacterial colonization, followed by Galaxaura oblongata-PLA and Cystoseira compressa-PLA membranes. SEM analysis confirmed these findings and revealed smooth surface textures for the marine algae-PLA membranes compared to the fibrous and porous structures of collagen membranes. Marine algae-PLA composite membranes show promising antibacterial properties and cytocompatibility for guided bone and tissue regeneration applications. Sargassum vulgare-PLA membranes demonstrated the highest resistance against bacterial colonization. These findings suggest that marine algae-PLA composite membranes could serve as effective biomaterials for infection control and tissue regeneration. Further in vivo validation and investigation of biodegradation properties are necessary to explore their clinical potential.

Dental and periodontal dimensions stability after esthetic clinical crown lengthening surgery: a 12-month clinical study.

OBJECTIVES: To evaluate the stability of periodontal tissues 3 (T3), 6 (T6), and 12 (T12) months after esthetic crown lengthening (ACL) and the possible correlations between changes in those structures. MATERIALS AND METHODS: Twenty individuals were evaluated through clinical assessment, photography, and tomography. Measurements included gingival margin (GM), clinical crown length (CCL), interdental papilla height (PH) and width (PW), gingival thickness (GT), bone thickness (BT), probing depth (PD), distance between alveolar crest and GM, distance between alveolar crest and cementoenamel junction. Nonparametric and correlation statistics were performed (p < 0.05). RESULTS: CCL at T0 was 7.42 ± 0.70 mm and increased to 9.48 ± 0.49 mm immediately after ACL, but it decreased to 8.93 ± 0.65 mm at T12. PD decreased 0.60 mm from T0 to T6, and it increased 0.39 mm from T6 to T12. BT decreased 0.20 mm, while GT increased 0.29 mm from T0 to T12. Both PW and PH showed enlargement in T12. A positive moderate correlation was found between CCL/T0 and CCL/T12, GT/T0 and AC-GM/T12, BT/T0 and GT/T12. A few negative moderate correlations were PD/T0 and CCL/T12, PD/T0 and PH/T0, PD/T0 and BT/T12. CONCLUSIONS: ACL procedure was effective. Although some rebound occurred, that was not clinically important. PD tended to reestablish its original length, partially due to a migration of GM during the healing period. Besides, a thickening of supracrestal soft tissues was observed. CLINICAL RELEVANCE: The present study centers on the factors influencing the stability of periodontal tissues after esthetic crown lengthening, underscoring the procedure's influence on esthetics and biology and the need for careful treatment planning.

Analysis of ultra-short implants with different angulations: a retrospective case-control study with 2 to 9 years of follow-up.

OBJECTIVES: Does the angulation of ultrashort implants influence the stability of the peri-implant bone? The present study aimed to evaluate the effectiveness of non-axial ultrashort implants after 2 to 9 years of follow-up in resorbed alveolar ridges. MATERIALS AND METHODS: All partially edentulous patients with ultrashort implants (< 6 mm) used in the posterior region of an atrophic mandible or maxilla, to support partial dentures in conjunction with standard implants, were included in this study. Peri-implant bone loss, success and survival rates, crestal bone levels, crown-to-implant ratio and implant angulation were measured for each implant. Implants were divided into two groups: straight implants with angulation < 17° (control group) and tilted implants with angulation > 17° (test group). Statistical analysis was used to find any significant differences between the two study groups and to investigate significant linear correlations among all the variables (p = 0.05). RESULTS: A total of 42 ultrashort implants with a mean of 4 years of follow-up were included: 20 ultrashort axially loaded implants and 22 tilted implants. Mean crestal bone levels from baseline loading to maximum follow-up did not reveal statistical differences in regard to PBL; mean success and survival rates were 100% in all groups. CONCLUSIONS: PBL, success and survival rates of axial ultrashort implants and tilted ultrashort implants are comparable to those of conventional implants. CLINICAL RELEVANCE: This retrospective study revealed that ultrashort implants, even when placed with an angulation > 17°, can safely be used to support partial fixed prostheses. Further prospective clinical studies with larger samples and prospective design are needed to confirm these findings.

Development of a correction coefficient for radiographic evaluation of the alveolar bone crest: a pilot study.

OBJECTIVES: To analyze the differences in cusp height on radiographs, establishing proportional relationships between cusp and alveolar bone crest (ABC) measurements. The goal of this study was to develop a correction coefficient by considering this proportion. MATERIALS AND METHODS: Twenty-one artificial teeth, molars and premolars, and bovine ribs were used. Interproximal radiographs were taken with the aid of a positioner. The vertical angles used were: 0°, + 5°, and + 10°, and processed using three spatial resolutions measured in line pairs per mm (lp/mm): 20, 25 and 40. The Perio filter was applied to each image, in addition to the original one. Combinations of angle, resolution, and filter were made. Eighteen images were analyzed by three specialists, resulting in 252 measurements for each evaluator, totaling 756 measurements. RESULTS: The overall variability of the measurements can be explained mainly by the variation in tooth anatomy. The 0° 25 lp/mm Perio filter method was the closest one to the actual clinical scenario for both cusps and ABC. The correction factor managed to explain 71.45% of the errors. CONCLUSIONS: The variation in vertical angulation interferes with cusp and ABC measurements, and the angulation at 0º and spatial resolution of 25 lp/mm showed better results. The use of correction coefficients allowed approaching actual measurement values. CLINICAL RELEVANCE: More accurate ABC height measurements are essential even in radiographic exams that do not meet the standard of excellence because the need to repeat radiographic exams is then eliminated.

Competence of allogenic demineralized tooth matrix in socket seal surgery for alveolar ridge preservation: a randomized control clinical trial.

OBJECTIVES: To assess and compare the clinical, radiological, and histological outcomes of socket seal surgery between two protocols: deproteinized demineralized tooth matrix (dpDTM) and freeze-dried bone allograft (FDBA) each covered with a free gingival graft. MATERIALS AND METHODS: Twenty extraction sockets in the anterior or premolar region were randomly allocated to either the dpDTM or FDBA protocol (n = 10 per group). Measurements of the alveolar ridge changes were obtained using an intraoral scanner and cone-beam computed tomography at 3 months post-operation. Three-month post surgery, the dental implant was installed (n = 5 per group), bone biopsies were obtained for histomorphometrical and micro-computed tomography analyses. Implant stability quotients (ISQs) were determined and compared at 3 months post-implant. RESULTS: Lower significant reductions in buccal alveolar ridge height and hard tissue volume were observed in dpDTM group compared to FDBA group at 3 months (0.25 ± 0.35 mm vs. 1.60 ± 0.66 mm [p = .000] and 9.64 ± 15.39% mm3 vs. 31.45 ± 18.11% mm3 [p = .010], respectively). At the same time, lower soft tissue volume reduction was detected in the dpDTM group compared to FDBA group (4.21 ± 5.25% mm3 vs. 5.25 ± 5.79% mm3). No statistically significant difference in the percentage of mineralized tissue formation was found between dpDTM group (53.39 ± 11.16%) and FDBA group (49.90 ± 3.27%). Even though the ISQ in the dpDTM group showed a higher value than the FDBA group at 3 months post-implant, the results were without statistical significance. CONCLUSIONS: Alveolar ridge preservation using dpDTM is an efficacious procedure for providing the conditions for the development of functional and esthetic implants.

Alveolar ridge splitting and simvastatin loaded xenograft for guided bone regeneration and simultaneous implant placement: randomized controlled clinical trial.

OBJECTIVES: The present study goal was to assess clinically and radiographically using simvastatin (SMV) loaded xenograft for guided bone regeneration (GBR) around simultaneously placed implants with alveolar ridge splitting in patients with horizontally atrophic jaw defect. MATERIALS AND METHODS: Randomized distribution of the twenty-two patients into two groups (11 patients each) was performed. Group I participants received alveolar ride splitting (ARS) with GBR using SMV gel mixed bone graft and a barrier membrane with simultaneous implant placement. Group II received the same treatment protocol without SMV gel. At the baseline, 6- and 9-months post-surgery, clinical and radiological alterations were assessed. RESULTS: Six months after therapy, PES records of group I were statistically significantly improved than those of group II (P < .001). Group I exhibited statistically significant expansion of the alveolar ridge over group II after 6 and 9 months (P < .001). When compared to group II over the evaluation interval between 6 and 9 months, group I demonstrated statistically substantially minimal loss of the mean marginal bone level (P < .001). At the 6- and 9-month observation periods, bone density gain was considerably higher in group I than that in group II (P < .001). CONCLUSION: Alveolar ridge splitting along with GBR-augmented SMV improve the clinical and radiographical outcomes around dental implant over GBR alone. CLINICAL RELEVANCE: Augmenting GBR with SMV in alveolar ridge splitting could boost implant osseointegration and enhance peri-implant tissue changes. CLINICAL TRIAL REGISTRATION: NCT05020405.

Immediately placed implants using simvastatin and autogenous tooth graft combination in periodontally compromised sites: a randomized controlled clinical trial.

OBJECTIVES: The present study aimed to assess clinically and radiographically the usage of autogenous tooth bone graft (ATBG) combined with and without Simvastatin (SMV) around immediately placed dental implants in periodontally compromised sites. METHODS: Thirty-nine patients required a single extraction of periodontally compromised tooth were divided into three groups (13 patients each). Group I received immediate implant placement (IIP) without grafting. Group II received IIP with ATBG filling the gap around IIP. Group III received SMV gel mixed with ATBG around IIP. Radiographic changes were reported at the baseline, 6-, and 12-months post-surgery. RESULTS: All implants achieved the success criteria with no complications. At 6- and 12-months post-surgery, group III showed a statistically lower mean ridge width loss compared to Group I and Group II (P < .001). Group II revealed less reduction in the mean alveolar ridge width compared to group I (P < .001). Group III showed a statistically significantly less MBL loss than group I and group II (P < .001). All groups showed a statistically significant increase in BD gain compared to baseline (P < .001). Group III showed statistically significant high BD compared to group II (P < .001). Group II showed statistically significantly higher mean BD gain than that of group I (P < .001). CONCLUSION: SMV combined with ATBG boosts the hard tissue parameters around dental implants over ATBG alone. Clinical trial registration was on August 1, 2021 (NCT04992416). CLINICAL RELEVANCE: ATBG with SMV in periodontally compromised sites could improve implant osseointegration and promote favorable changes in peri-implant tissues.

The repeatability of periodontal imaging with intraoral ultrasound scanning.

OBJECTIVE: Ultrasound is a non-invasive and low-cost diagnostic tool widely used in medicine. Recent studies have demonstrated that ultrasound imaging might have the potential to be used intraorally to assess the periodontium by comparing it to current imaging methods. This study aims to characterize the repeatability of intraoral periodontal ultrasound imaging. MATERIALS AND METHODS: Two hundred and twenty-three teeth were scanned from fourteen volunteers participating in this study. One operator conducted all the scans in each tooth thrice with a 20 MHz intraoral ultrasound. The repeatability of three measurements, alveolar bone crest to the cementoenamel junction (ABC-CEJ), gingival thickness (GT), and alveolar bone thickness (ABT), was calculated with intercorrelation coefficient (ICC). Measurements were also compared with mean absolute deviation (MAD), repeatability coefficient (RC), and descriptive statistics. RESULTS: ICC scores for intra-rater repeatability were 0.917(0.897,0.933), 0.849(0.816,0.878), and 0.790(0.746,0.898), MAD results were 0.610 mm (± 0.508), 0.224 (± 0.200), and 0.067 (± 0.060), and RC results were 0.648, 0.327, and 0.121 for ABC-CEJ, GT, and ABT measurements, respectively. CONCLUSION: Results of the present study pointed towards good or excellent repeatability of ultrasound as a measurement tool for periodontal structures. CLINICAL RELEVANCE: Clinicians could benefit from the introduction of a novel chairside diagnostic tool. Ultrasound is a non-invasive imaging assessment tool for the periodontium with promising results in the literature. Further validation, establishment of scanning protocols, and commercialization are still needed before ultrasound imaging is available for clinicians.

Effects of coenzyme Q10 on orthodontic tooth movement and alveolar bone remodeling in rats.

OBJECTIVES: To evaluate the effects of coenzyme Q10 (CoQ10) on alveolar bone remodeling and orthodontic tooth movement (OTM). MATERIALS AND METHODS: An orthodontic appliance was placed in 42 female Sprague‒Dawley rats were divided into two groups: the orthodontic force (OF) group (n = 21) and the OF + CoQ10 (CoQ10) treatment group (n = 21). Each group was divided into 3 subgroups, and the rats were sacrificed on days 3, 7 and 14. The rats in CoQ10 and OF groups were administered 100 mg/kg b.w./day CoQ10 (in 1 mL/b.w. soybean oil) and 1 mL b.w./day soybean oil, respectively, by orogastric gavage. The OTM was measured at the end of the experiment. The osteoclast, osteoblast and capillary numbers; vascular endothelial growth factor (VEGF), receptor activator nuclear kappa B ligand (RANKL) and osteoprotegrin (OPG) levels in tissue; and total antioxidant status (TAS) and total oxidant status (TOS) in blood were determined. RESULTS: Compared with the OF group, the CoQ10 treatment group exhibited decreased orthodontic tooth movement and osteoclast and capillary numbers. Indeed, the levels of VEGF and RANKL decreased, while the levels of OPG increased except on day 7. Additionally, the CoQ10 treatment group exhibited lower TOS and higher TAS on days 7 and 14 (p < 0.05). Histological findings showed that the morphology of osteoblasts changed in the CoQ10 group; however, there was no significant difference in the number of osteoblasts between the groups (p > 0.05). CONCLUSION: Due to its effect on oxidative stress and inflammation, CoQ10 regulates bone remodeling by inhibiting osteoclast differentiation, promoting osteoblast differentiation and reducing the amount of OTM. CLINICAL RELEVANCE: Considering that OTM may be slowed with the use of CoQ10, topics such as orthodontic treatment duration, orthodontic force activation and appointment frequency should be considered in treatment planning. It is predicted that the use of CoQ10 will support the effectiveness of treatment in clinical applications such as preventing relapse in orthodontic treatment by regulating bone modulation and anchorage methods that suppress/optimize unwanted tooth movement.