Evaluation of the characteristics of boron-dose enhancer (BDE) materials for BNCT using near threshold 7Li(p,n)7Be direct neutrons.

ABSTRACT

The characteristics of a number of candidate boron-dose enhancer (BDE) materials for boron neutron capture therapy (BNCT) using near threshold 7Li(p,n)7Be direct neutrons were evaluated based on the treatable protocol depth (TPD), defined in this paper. Simulation calculations were carried out by means of MCNP-4B transport code for candidate BDE materials, namely, (C2H4)n, (C2H3F)n, (C2H2F2)n, (C2HF3)n, (C2D4)n, (C2F4)n, beryllium metal, graphite, D2O and 7LiF. Dose protocols applied were those used for intra-operative BNCT treatment for brain tumour currently used in Japan. The maximum TPD (TPDmax) for each BDE material was found to be between 4 cm and 5 cm in the order of (C2H4)n < (C2H3F)n < (C2H2F2)n < (C2HF3)n < beryllium metal < (C2D4)n < graphite < (C2F4)n < D2O < 7LiF. Based on the small and arbitrary variations in the TPDmax for these materials, an explicit advantage of a candidate BDE material could not be established from the TPDmax alone. The dependence of TPD on BDE thickness was found to be influenced by the type of BDE material. For materials with hydrogen, sharp variations in TPD were observed, while those without hydrogen exhibited more moderate fluctuations in TPD as the BDE thickness was varied. The BDE thickness corresponding to TPDmax (BDE(TPDmax)) was also found to depend on the type of BDE material used. Thicker BDE(TPDmax), obtained mostly for BDE materials without hydrogen, significantly reduced the dose rates within the phantom. The TPDmax, the dependence of TPD on BDE thickness and the BDE (TPDmax) were ascertained as appropriate optimization criteria in choosing suitable BDE materials for BNCT. Among the candidate BDE materials considered in this study. (C2H4)n was judged as the suitable material for near-surface tumours and beryllium metal for deeper tumours based on these optimization criteria and other practical considerations.