Standard Practice for Bulk Sample Collection and Swab Sample Collection of Visible Powders Suspected of Being Biological Agents from Nonporous Surfaces: collaborative study.

The draft ASTM Standard, "Standard Practice for Bulk Sample Collection and Swab Sample Collection of Visible Powders Suspected of Being Biological Agents from Nonporous Surfaces," was validated in a collaborative study consisting of 6 teams comprised of Civil Support personnel and First Responders, 2 levels of Bacillus anthracis Sterne and Bacillus thuringiensis Kurstaki spores, and 7 nonporous surfaces. The sample collection standard includes collection of the bulk sample (Method A) using a dry swab to push the sample onto a collection card and collection of residual sample (Method B) using an onsite test kit followed by a wet swab intended for additional onsite testing. Method A is to be performed prior to Method B in order to preserve unadulterated sample as potential criminal evidence. While statistical differences were observed between surfaces, between teams, and the interaction of surfaces and teams for the various sample types collected, these differences are due to the very low variability of the data and a much more narrow distribution than an ideal normal distribution, rather than to any practical differences. The data demonstrate that from both the 1.0 and 0.01 g powder samples, high levels of spores (mean >10(6) CFU) are recovered from the 7 surfaces by both the dry swab used in bulk sample collection (Method A) and the wet swab (Method B) sampling of the residual powder after bulk sample collection. Thus, after bulk sample collection, there is a high level of residual spores remaining for onsite biological testing and both Methods A and B should be performed in the field.