Injectability of brushite-forming Mg-substituted and Sr-substituted alpha-TCP bone cements.
J Mater Sci Mater Med
; 21(2): 431-8, 2010 Feb.
Article
em En
| MEDLINE
| ID: mdl-19851845
ABSTRACT
The influence of magnesium- and strontium-substitutions on injectability and mechanical performance of brushite-forming alpha-TCP cements has been evaluated in the present work. The effects of Mg- and Sr-substitutions on crystalline phase composition and lattice parameters were determined through quantitative X-ray phase analysis and structural Rietveld refinement of the starting calcium phosphate powders and of the hardened cements. A noticeable dependence of injectability on the liquid-to-powder ratio (LPR), smooth plots of extrusion force versus syringe plunger displacement and the absence of filter pressing effects were observed. For LPR values up to 0.36 ml g(-1), the percentage of injectability was always higher and lower for Mg-containing cements and for Sr-containing cements, respectively, while all the pastes could be fully injected for LPR > 0.36 ml g(-1). The hardened cements exhibited relatively high wet compressive strength values (~17-25 MPa) being the Sr- and Mg-containing cements the strongest and the weakest, respectively, holding an interesting promise for uses in trauma surgery such as for filling bone defects and in minimally invasive techniques such as percutaneous vertebroplasty to fill lesions and strengthen the osteoporotic bone.
Texto completo:
1
Coleções:
01-internacional
Base de dados:
MEDLINE
Assunto principal:
Estrôncio
/
Cimentos Ósseos
/
Fosfatos de Cálcio
/
Magnésio
Idioma:
En
Ano de publicação:
2010
Tipo de documento:
Article